首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
High‐pressure kyanite‐bearing felsic granulites in the Bashiwake area of the south Altyn Tagh (SAT) subduction–collision complex enclose mafic granulites and garnet peridotite‐hosted sapphirine‐bearing metabasites. The predominant felsic granulites are garnet + quartz + ternary feldspar (now perthite) rocks containing kyanite, plagioclase, biotite, rutile, spinel, corundum, and minor zircon and apatite. The quartz‐bearing mafic granulites contain a peak pressure assemblage of garnet + clinopyroxene + ternary feldspar (now mesoperthite) + quartz + rutile. The sapphirine‐bearing metabasites occur as mafic layers in garnet peridotite. Petrographical data suggest a peak assemblage of garnet + clinopyroxene + kyanite + rutile. Early kyanite is inferred from a symplectite of sapphirine + corundum + plagioclase ± spinel, interpreted to have formed during decompression. Garnet peridotite contains an assemblage of garnet + olivine + orthopyroxene + clinopyroxene. Thermobarometry indicates that all rock types experienced peak P–T conditions of 18.5–27.3 kbar and 870–1050 °C. A medium–high pressure granulite facies overprint (780–820 °C, 9.5–12 kbar) is defined by the formation of secondary clinopyroxene ± orthopyroxene + plagioclase at the expense of garnet and early clinopyroxene in the mafic granulites, as well as by growth of spinel and plagioclase at the expense of garnet and kyanite in the felsic granulite. SHRIMP II zircon U‐Pb geochronology yields ages of 493 ± 7 Ma (mean of 11) from the felsic granulite, 497 ± 11 Ma (mean of 11) from sapphirine‐bearing metabasite and 501 ± 16 Ma (mean of 10) from garnet peridotite. Rounded zircon morphology, cathodoluminescence (CL) sector zoning, and inclusions of peak metamorphic minerals indicate these ages reflect HP/HT metamorphism. Similar ages determined for eclogites from the western segment of the SAT suggest that the same continental subduction/collision event may be responsible for HP metamorphism in both areas.  相似文献   

2.
Microlites (minute spherulitic, dendritic, skeletal, acicular and poikilitic crystals) diagnostic of crystallization in quenched melt or glass in fault rocks have been used to infer fossil earthquakes. High‐P microlites and crystallites are described here in a variably eclogitized gabbro, the wallrock to the coesite‐bearing eclogite breccia at Yangkou in the Chinese Su‐Lu high‐P metamorphic belt. The studied hand specimens are free of discernible shear deformation, although microfractures are not uncommon under the microscope. In the least eclogitized gabbro, the metagabbro, stellate growths of high‐P minerals on the relict igneous minerals are common. Dendritic garnet crystals (<1?5 μm) grew around rutile and/or phengite replacing ilmenite and biotite, respectively. Skeletal garnet also rims broken flakes of igneous biotite and mechanically twinned augite. Radial intergrowths of omphacite and quartz developed around relict igneous orthopyroxene and are rimmed by skeletal or poikilitic garnet where a Ti‐bearing mineral relict is present. Acicular epidote, kyanite and phengite crystallites are randomly distributed in a matrix of Na‐rich plagioclase, forming the pseudomorphs after igneous plagioclase. In the more eclogitized gabbro, the coronitic eclogite located closer to the eclogite breccia, all the igneous minerals broke down into high‐P assemblages. Thick coronas of poikilitic garnet grew between the pseudomorphs after igneous plagioclase and ferromagnesian minerals. The igneous plagioclase is replaced by omphacite crystallites, with minor amounts of phengite and kyanite. Thermodynamic modelling of the plagioclase pseudomorphs shows an increase in P–T in the wallrock from the metagabbro to the coronitic eclogite, and the P–T variation is unrelated to H2O content. The fluid‐poor pressure overstepping scenario is unsupported both by phase diagram modelling and by whole‐rock chemical data, which show that the various types of eclogitized gabbro are all fairly dry. A large pressure difference of >2 GPa between the metagabbro and the coesite‐bearing eclogites ~20 m apart cannot be explained by the subduction hypothesis because this would require a depth difference of >60 km. The microlites and crystallites are evidence for dynamic crystallization due to rapid cooling because constitutional supercooling was unlikely for the plagioclase pseudomorphs. The lack of annealing of the broken biotite and augite overgrown by strain free skeletal garnet is consistent with a transient high‐P–T event at a low ambient temperature (<300 °C), probably in the crust. Therefore, the eclogitization of the wallrock to the eclogite breccia was also coseismic, as proposed earlier for the eclogite facies fault rocks. The outcrop‐scale P–T variation and the transient nature of the high‐P–T event are inconsistent with the other existing tectonic models for high‐P metamorphism. The fact that the less refractory but denser biotite is largely preserved while the more refractory but less dense plagioclase broke down completely into high‐P microlite assemblages in the metagabbro indicates a significant rise in pressure rather than temperature. Given that the metamorphic temperatures are far below the melting temperatures of most of the gabbroic minerals under fluid‐absent conditions, stress‐induced amorphization appears to be the more likely mechanism of the coseismic high‐P metamorphism.  相似文献   

3.
Permian‐aged metagabbros from the eclogite type‐locality in the eastern European Alps were partially to completely transformed to eclogite during Eoalpine intracontinental subduction. Microtextures developed along a preserved fluid infiltration and reaction front in the gabbros record the incipient gabbro‐to‐eclogite transition, allowing the details of the eclogitization process to be investigated. Original, anorthite‐rich igneous plagioclase is pervasively replaced by fine‐grained intergrowths of clinozoisite, kyanite and Na‐rich plagioclase. Where plagioclase was in contact with igneous orthopyroxene, 100–200 μm thick bimineralic coronae of symplectic kyanite and diopsidic clinopyroxene form along the edges of the grains. The rims of igneous orthopyroxene develop a complementary bimineralic corona of diopsidic clinopyroxene and garnet. Igneous clinopyroxene does not show any breakdown textures; however, jadeite content gradually increases towards the rims. In addition, exsolution lamellae inherited from the igneous clinopyroxene become progressively more jadeitic as eclogitization proceeds. Given that the igneous plagioclase is pervasively replaced by clinozoisite, kyanite and Na‐rich plagioclase, whereas kyanite–diopside symplectites are confined to narrow rim zones, we suggest that the development of these textures was controlled by the (im)mobility of different elements on different length scales. The presence of hydrous minerals in the core of anhydrous plagioclase indicates that H2O diffusivity occurred on a mm‐scale. By contrast, the size of the anhydrous diopside–kyanite and diopside–garnet symplectites indicate that Fe–Mg–Ca–Na diffusivity was limited to a 10s of μm scale. Chemical potential relations calculated in the idealized NCASH chemical system show that the clinozoisite–kyanite–albite intergrowths formed due to an increase of μH2O to plagioclase, whereas all other elements remained effectively immobile on the scale of this texture. Fluid conditions indicated by this texture span from virtually dry conditions (0.15) to H2O‐saturation, and therefore does not imply that the rocks were ever fluid‐saturated. Calculations in the CMAS and NCFMAS systems show that the gabbro‐to‐eclogite transition is characterized by the growth of garnet, diopsidic clinopyroxene and kyanite due to diffusion of Ca (+ Na) and Mg (+ Fe) along a μCaO (+ Na2O)–μMgO (+ FeO) chemical potential gradient developed between orthopyroxene and plagioclase compositional domains. The anhydrous nature of the textures indicate that the gabbro‐to‐eclogite transition is not driven by hydration; however, increased μH2O acts as a catalyst that increases diffusivity of all elements and rates of dissolution–precipitation, allowing the overstepped metamorphic reactions to occur. Our results show that crustal eclogite formation requires low H2O content, confirming that true eclogites are dry rocks.  相似文献   

4.
The South Altyn orogen in West China contains ultra high pressure (UHP) terranes formed by ultra‐deep (>150–300 km) subduction of continental crust. Mafic granulites which together with ultramafic interlayers occur as blocks in massive felsic granulites in the Bashiwake UHP terrane, are mainly composed of garnet, clinopyroxene, plagioclase, amphibole, rutile/ilmenite, and quartz with or without kyanite and sapphirine. The kyanite/sapphirine‐bearing granulites are interpreted to have experienced decompression‐dominated evolution from eclogite facies conditions with peak pressures of 4–7 GPa to high pressure (HP)–ultra high temperature (UHT) granulite facies conditions and further to low pressure (LP)–UHT facies conditions based on petrographic observations, phase equilibria modelling, and thermobarometry. The HP–UHT granulite facies conditions are constrained to be 2.3–1.6 GPa/1,000–1,070°C based on the observed mineral assemblages of garnet+clinopyroxene+rutile+plagioclase+amphibole±quartz and measured mineral compositions including the core–rim increasing anorthite in plagioclase (XAn = 0.52–0.58), core–rim decreasing jadeite in clinopyroxene (XJd = 0.20–0.15), and TiO2 in amphibole (TiM2/2 = 0.14–0.18). The LP–UHT granulite facies conditions are identified from the symplectites of sapphirine+plagioclase+spinel, formed by the metastable reaction between garnet and kyanite at <0.6–0.7 GPa/940–1,030°C based on the calculated stability of the symplectite assemblages and sapphirine–spinel thermometer results. The common granulites without kyanite/sapphirine are identified to record a similar decompression evolution, including eclogite, HP–UHT granulite, and LP–UHT granulite facies conditions, and a subsequent isobaric cooling stage. The decompression under HP–UHT granulite facies is estimated to be from 2.3 to 1.3 GPa at ~1,040°C on the basis of textural records, anorthite content in plagioclase (XAn = 0.25–0.32), and grossular content in garnet (XGrs = 0.22–0.19). The further decompression to LP–UHT facies is defined to be >0.2–0.3 GPa based on the calculated stability for hematite‐bearing ilmenite. The isobaric cooling evolution is inferred mainly from the amphibole (TiM2/2 = 0.14–0.08) growth due to the crystallization of residual melts, consistent with a temperature decrease from >1,000°C to ~800°C at ~0.4 GPa. Zircon U–Pb dating for the two types of mafic granulite yields similar protolith and metamorphic ages of c. 900 Ma and c. 500 Ma respectively. However, the metamorphic age is interpreted to represent the HP–UHT granulite stage for the kyanite/sapphirine‐bearing granulites, but the isobaric cooling stage for the common granulites on the basis of phase equilibria modelling results. The two types of mafic granulite should share the same metamorphic evolution, but show contrasting features in petrography, details of metamorphic reactions in each stage, thermobarometric results, and also the meaning of zircon ages as a result of their different bulk‐rock compositions. Moreover, the UHT metamorphism in UHP terranes is revealed to represent the lower pressure overprinting over early UHP assemblages during the rapid exhumation of ultra‐deep subducted continental slabs, in contrast to the cause of traditional UHT metamorphism by voluminous heat addition from the mantle.  相似文献   

5.
High‐pressure granulites are an important record of geodynamic processes in overthickened or subducted continental crust. Orthopyroxene‐free assemblages in granitic (ternary feldspar(s) + quartz + garnet + kyanite + rutile), intermediate (ternary feldspar(s) + quartz + garnet + clinopyroxene ± kyanite ±rutile ± titanite) and basic (garnet + clinopyroxene + plagioclase ± quartz + rutile) compositions indicate formation conditions at mantle depths. Clinopyroxene compositions in Variscan high‐pressure granulites are unusual in that they include omphacite (in plagioclase‐bearing rocks thus not eclogite) and Al‐rich diopside (i.e. indicating high Ca‐Tschermak content), with both yielding temperatures above 900 °C. Problems such as compositional zoning, multiple generations of key phases in reaction domains and unmixing of high‐temperature solid‐solution phases during cooling (ternary feldspars, omphacite) clearly indicate disequilibrium and require very careful interpretation as to which phases and compositions possibly represent a former equilibrium association. Pressure–temperature (P–T) determination by the pseudosection method, although allowing prediction of mineral assemblages, compositions and molar proportions for a fixed bulk composition for modelled P–T conditions, still requires reliable activity–composition information for the key phases feldspar and clinopyroxene as well as an interpretation of former equilibrium compositions in the investigated samples, i.e. the same restrictions applying to conventional thermobarometry. The interpretations of some recently determined pseudosections for the composition of Variscan clinopyroxene‐bearing high‐pressure granulites contradict numerous published P–T paths. However, quantitative information from thermobarometry or pseudosections must be integrated with key petrographic observations. In the case of the Variscan example, it is argued that petrographic observations and published P–T paths are consistent with mineral assemblages predicted in pseudosections and support existing tectonometamorphic models.  相似文献   

6.
High‐pressure granulites are characterised by the key associations garnet‐clinopyroxene‐plagioclase‐quartz (in basic rocks) and kyanite‐K‐feldspar (metapelites and felsic rocks) and are typically orthopyroxene‐free in both basic and felsic bulk compositions. In regional metamorphic areas, two essential varieties exist: a high‐ to ultrahigh‐temperature group and a group representing overprinted eclogites. The high‐ to ultrahigh‐temperature type formerly contained high‐temperature ternary feldspar (now mesoperthite) coexisting with kyanite, is associated with garnet peridotites, and formed at conditions above 900 °C and 1.5 GPa. Clinopyroxene in subordinate basic rocks is Al‐rich and textural evidence points to a high‐pressure–high‐temperature melting history. The second variety contains symplectite‐like or poikilitic clinopyroxene‐plagioclase intergrowths indicating former plagioclase‐free, i.e. eclogite facies assemblages. This type of rock formed at conditions straddling the high‐pressure amphibolite/high‐pressure granulite field at around 700–850 °C, 1.0–1.4 GPa. Importantly, in the majority of high‐pressure granulites, orthopyroxene is secondary and is a product of reactions at pressures lower than the peak recorded pressure. In contrast to low‐ and medium‐pressure granulites, which form at conditions attainable in the mid to lower levels of normal continental crust, high‐pressure granulites (of nonxenolith origin) mostly represent rocks formed as a result of short‐lived tectonic events that led to crustal thickening or subduction of the crust into the mantle. Short times at high‐temperature conditions are reflected in the preservation of prograde zoning in garnet and pyroxene. High‐pressure granulites of both regional types, although rare, are known from both old and young metamorphic terranes (e.g. c. 45 Ma, Namche Barwa, E Himalaya; 400–340 Ma, European Variscides; 1.8 Ga Hengshan, China; 1.9 Ga, Snowbird, Saskatchewan and 2.5 Ga Jianping, China). This spread of ages supports proposals suggesting that thermal and tectonic processes in the lithosphere have not changed significantly since at least the end of the Archean.  相似文献   

7.
High-pressure (HP) granulites provide telling records of mineral reactions at upper mantle to lower crustal levels and key information on the fate of material in subduction systems. The latter especially applies when they abut eclogite and mantle dunite because such rock associations are crucial for understanding the incompletely known processes at the interface of converging plates. A continental arc, active c. 520–395 Ma ago, formed an enigmatic example of such a rock association in the Songshugou area, Qinling Orogen. To unravel the juxtaposition of the distinct rocks, this study combines petrography, phase equilibria modelling, conventional thermobarometry, and zircon U–Th–Pb–Ti–REE analysis. Two mafic HP granulites, which contain the mineral assemblages garnet–clinopyroxene–plagioclase–rutile–mesoperthite–quartz and garnet–clinopyroxene–plagioclase–rutile, experienced peak metamorphic conditions of ≤1.4 GPa, 860°C and ~1.3 GPa, ≥910°C, respectively. During decompression and cooling, at 489 ± 4 Ma, amphibole lamellae unmixed from a clinopyroxene solid solution and orthopyroxene in part replaced garnet. A felsic HP granulite shows equilibration of garnet, perthite, antiperthite, kyanite, quartz, and rutile at 810–860°C, ~1.2 GPa, sillimanite growth during decompression, and upper amphibolite facies cooling at 510 ± 4 Ma. Though the thermobarometric data are just within the methodological errors, the U/Pb zircon ages imply the HP granulites did not evolve coherently. The HP granulites either represent foundered lower arc crust or originated from subduction erosion because their geochemistry is indistinguishable from that of the hanging-wall plate. Published and new pressure–temperature–time–deformation paths converge at ~710°C, ~0.9 GPa, and ≲470 Ma, implying exhumation tectonics juxtaposed the HP granulites with a mélange of eclogite and mantle dunite at lower crustal levels. This study highlights that lower arc crust can comprise material of diverse evolution.  相似文献   

8.
Relict eclogites and associated high-pressure rocks are present in the Eastern Segment of the SW Swedish gneiss region (the tectonic counterpart of the Parautochthonous Belt of the Canadian Grenville). These rocks give evidence of Sveconorwegian eclogite facies metamorphism and subsequent pervasive reworking and deformation at granulite and amphibolite facies conditions. The best-preserved eclogite relics suggest a clockwise P–T –t history, beginning in the amphibolite facies, progressing through the eclogite facies, decompressing and partially reequilibrating through the high- and medium-pressure granulite facies, before cooling through the amphibolite facies. Textures demonstrate the former coexistence of the plagioclase-free assemblages garnet+clinopyroxene+quartz+rutile+ilmenite, garnet+clinopyroxene+ kyanite+rutile, and garnet+kyanite+quartz+rutile. The former existence of omphacite is evidenced by up to 45 vol.% plagioclase expelled as small grains within large clinopyroxene. Matrix plagioclase is secondary and occurs expelled from clinopyroxene or in fine-grained, granulite facies reaction domains formed during resorption of garnet and kyanite. Garnet shows preserved prograde growth zoning with rimward increasing pyrope content, decreasing spessartine content and decreasing Fe/(Fe+Mg) ratio, but is partly resorbed and reequilibrated at the rims. P–T estimates from microdomains with clinopyroxene+plagioclase+quartz+garnet indicate pressures of 9.5–12 kbar and temperatures of 705–795 °C for a stage of the granulite facies decompression. The preservation of the prograde zoning suggests that the rocks did not reside at these high temperatures for more than a few million years, and chemical disequilibrium and ‘frozen’ reaction textures indicate heterogeneous reaction progress and overstepping of reactions during the decompression through the granulite facies. Together these features suggest a rapid tectonic exhumation. The eclogite relics occur within a high-grade deformation zone with WNW–ESE stretching and associated oblique normal-sense, top-to-the-east (sensu lato) displacement, suggesting that extension was a main cause for the decompression and exhumation. Probable tectonic scenarios for this deformation are Sveconorwegian late-orogenic gravitational collapse or overall WNW–ESE extension.  相似文献   

9.
Early Palaeozoic kyanite–staurolite‐bearing epidote–amphibolites including foliated epidote–amphibolite (FEA), and nonfoliated leucocratic or melanocratic metagabbros (LMG, MMG), occur in the Fuko Pass metacumulate unit (FPM) of the Oeyama belt, SW Japan. Microtextural relationships and mineral chemistry define three metamorphic stages: relict granulite facies metamorphism (M1), high‐P (HP) epidote–amphibolite facies metamorphism (M2), and retrogression (M3). M1 is preserved as relict Al‐rich diopside (up to 8.5 wt.% Al2O3) and pseudomorphs after spinel and plagioclase in the MMG, suggesting a medium‐P granulite facies condition (0.8–1.3 GPa at > 850 °C). An unusually low‐variance M2 assemblage, Hbl + Czo + Ky ± St + Pg + Rt ± Ab ± Crn, occurs in the matrix of all rock types. The presence of relict plagioclase inclusions in M2 kyanite associated with clinozoisite indicates a hydration reaction to form the kyanite‐bearing M2 assemblage during cooling. The corundum‐bearing phase equilibria constrain a qualitative metamorphic P–T condition of 1.1–1.9 GPa at 550–800 °C for M2. The M2 minerals were locally replaced by M3 margarite, paragonite, plagioclase and/or chlorite. The breakdown of M2 kyanite to produce the M3 assemblage at < 0.5 GPa and 450–500 °C suggests a greenschist facies overprint during decompression. The P–T evolution of the FPM may represent subduction of an oceanic plateau with a granulite facies lower crust and subsequent exhumation in a Pacific‐type orogen.  相似文献   

10.
Corona textures around kyanite, involving for example zoned plagioclase separating kyanite from the matrix, reflect the instability of kyanite with the matrix on changing P–T conditions, commonly related to decompression. The chemical potential gradients set up between the kyanite and the matrix as a consequence of slow Al diffusion drive corona development, with the zoning of the plagioclase reflecting the gradients. Calculated mineral equilibria are used to account for corona textures involving plagioclase ± garnet around kyanite, and replacement of kyanite by plagioclase + spinel symplectite, in quartz + plagioclase + K‐feldspar + garnet + kyanite granulite facies gneiss from the Blanský les massif in the Bohemian massif, Czech Republic. In the garnet‐bearing coronas, a commonly discontinuous garnet layer lies between the kyanite and the continuous plagioclase layer in the corona, with both the garnet and the plagioclase appearing mainly to replace matrix rather than kyanite. The garnet layer commonly extends around kyanite from original matrix garnet adjacent to the kyanite. Where garnet is missing in the corona, the kyanite itself may be replaced by a spinel–plagioclase corona. In a local equilibrium model, the mineral and mineral compositional spatial relationships are shown to correspond to paths in μ(Na2O)–μ(CaO)–μ(K2O)–μ(FeO)–μ(MgO)–μ(SiO2) in the model chemical system, Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2 (NCKFMAS). The discontinuous nature of the garnet layer in coronas is accounted for by the effect of the adjacent original garnet on the chemical potential relationships. The replacement of kyanite by spinel + plagioclase appears to be metastable with respect to replacement by corundum + plagioclase, possibly reflecting the difficulty of nucleating corundum.  相似文献   

11.
Garnet–clinopyroxene intermediate granulites occur as thin layers within garnet–kyanite–K–feldspar felsic granulites of the St. Leonhard granulite body in the Bohemian Massif. They consist of several domains. One domain consists of coarser‐grained coexisting ternary feldspar, clinopyroxene, garnet, quartz and accessory rutile and zircon. The garnet has 16–20% grossular, and the clinopyroxene has 9% jadeite and contains orthopyroxene exsolution lamellae. Reintegrated ternary feldspar and the Zr‐in‐rutile thermometer give temperatures higher than 950 °C. Mineral equilibria modelling suggests crystallization at 14 kbar. The occurrence and preservation of this mineral assemblage is consistent with crystallization from hot dry melt. Between these domains is a finer‐grained deformed matrix made up of diopsidic clinopyroxene, orthopyroxene, plagioclase and K‐feldspar, apparently produced by reworking of the coarser‐grained domains. Embedded in this matrix, and pre‐dating the reworking deformation, are garnet porphyroblasts that contain clinopyroxene, feldspar, quartz, rutile and zircon inclusions. In contrast with the garnet in the coarser‐grained domains, the garnet generally has >30% grossular, the included clinopyroxene has 7–27% jadeite and the Zr content of rutile indicates much lower temperatures. Some of these high‐grossular garnet show zoning in Fe/(Fe + Mg), decreasing from 0.7 in the core to 0.6 and then increasing to 0.7 at the rim. These garnet are enigmatic, but with reference to appropriate pseudosections are consistent with localized new mineral growth from 650 to 850 °C and 10 to 17 kbar, or with equilibration at 20 kbar and 770 °C, modified by two‐stage diffusional re‐equilibration of rims, at 10–15 and 8 kbar. The strong pervasive deformation has obscured relationships that might have aided the interpretation of the origin of these porphyroblasts. The evolution of these rocks is consistent with formation by igneous crystallization and subsequent metamorphism to high‐T and high‐P, rather than an origin by ultrahigh‐T metamorphism. Regarding the petrographic complexity, combination of the high grossular garnet with the ternary feldspar to infer ultrahigh‐T metamorphism at high pressure is not justified.  相似文献   

12.
Mineralogical and mineral chemical evidence for prograde metamorphism is rarely preserved in rocks that have reached ultrahigh‐temperature (UHT) conditions (>900 °C) because high diffusion and reaction rates erase evidence for earlier assemblages. The UHT, high‐pressure (HP) metasedimentary rocks of the Leverburgh belt of South Harris, Scotland, are unusual in that evidence for the prograde history is preserved, despite having reached temperatures of ～955 °C or more. Two lithologies from the belt are investigated here and quantitatively modelled in the system NaO–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O: a garnet‐kyanite‐K‐feldspar‐quartz gneiss (XMg = 37, A/AFM = 0.41), and an orthopyroxene‐garnet‐kyanite‐K‐feldspar quartzite (XMg = 89 A/AFM = 0.68). The garnet‐kyanite gneiss contains garnet porphyroblasts that grew on the prograde path, and captured inclusion assemblages of biotite, sillimanite, plagioclase and quartz (<790 °C, <9.5 kbar). These porphyroblasts preserve spectacular calcium zonation features with an early growth pattern overgrown by high‐Ca rims formed during high‐P metamorphism in the kyanite stability field. In contrast, Fe‐Mg zonation in the same garnet porphyroblasts reflects retrograde re‐equilibration, as a result of the relatively faster diffusivity of these ions. Peak P–T are constrained by the occurrence of coexisting orthopyroxene and aluminosilicate in the quartzite. Orthopyroxene porphyroblasts [y(opx) = 0.17–0.22] contain sillimanite inclusions, indicative of maximum conditions of 955 ± 45 °C at 10.0 ± 1.5 kbar. Subsequently, orthopyroxene, kyanite, K‐feldspar and quartz developed in equilibrated textures, constraining the maximum pressure conditions to 12.5 ± 0.8 kbar at 905 ± 25 °C. P–T–X modelling reveals that the mineral assemblage orthopyroxene‐kyanite‐quartz is compositionally restricted to rocks of XMg > 84, consistent with its very rare occurrence in nature. The preservation of unusual high P–T mineral assemblages and chemical disequilibrium features in these UHT HP rocks is attributed to a rapid tectonometamorphic cycle involving arc subduction and terminating in exhumation.  相似文献   

13.
Mafic granulites have been found as structural lenses within the huge thrust system outcropping about 10 km west of Nam Co of the northern Lhasa Terrane, Tibetan Plateau. Petrological evidence from these rocks indicates four distinct metamorphic assemblages. The early metamorphic assemblage (M1) is preserved only in the granulites and represented by plagioclase+hornblende inclusions within the cores of garnet porphyroblasts. The peak assemblage (M2) consists of garnet+clinopyroxene+hornblende+plagioclase in the mafic granulites. The peak metamorphism was followed by near-isothermal decompression (M3), which resulted in the development of hornblende+plagioclase symplectites surrounding embayed garnet porphyroblasts, and decompression-cooling (M4) is represented by minerals of hornblende+plagioclase recrystallized during mylonization. The peak (M2) P-T conditions of garnet+ clinopyroxene+plagioclase+hornblende were estimated at 769-905℃ and 0.86-1.02 GPa based on the geothermometers and geobarometers. The  相似文献   

14.
柴北缘都兰高压麻粒岩的变质演化及形成的动力学背景   总被引：7，自引：5，他引：2  
于胜尧  张建新  李金平 《岩石学报》2009,25(9):2224-2234
在柴北缘-阿尔金HP/UHP变质带东端,新识别出一个高压麻粒岩单元.高压基性麻粒岩是高压麻粒岩单元的主体,还包括少量高压中酸性麻粒岩.高压基性麻粒岩主要由平衡共生的石榴子石、单斜辉石、斜长石组成,还含有不等量的蓝晶石、角闪石、石英、金红石、黝帘石/斜黝帘石、钛铁矿、方柱石等矿物.高压长英质麻粒岩主要包括石榴子石、蓝晶石、钾长石、斜长石、石英等矿物,并具有少量的单斜辉石和角闪石.岩石学和矿物学数据显示高压麻粒岩经历了多阶段的变质演化,温压计算获得峰期高压麻粒岩相的变质条件为1.40～1.85GPa和800～925℃.退变质高角闪岩相的变质条件为P=0.80～1.05GPa和T=580～695℃：进一步的退变质作用发生在低角闪岩相/绿片岩相条件下(<0.8GPa和<550℃).岩石学、矿物学及年代学资料研究表明都兰地区的高压麻粒岩具有与相邻榴辉岩不同的变质演化历史,而不是榴辉岩在抬升过程中热松弛作用所致.高压麻粒岩可能形成于与陆壳俯冲相关的造山带增厚的陆壳根部环境,形成的深度为50～70km.  相似文献   

15.
Geothermometry of eclogites and other high pressure (HP)/ultrahigh‐pressure (UHP) rocks has been a challenge, due to severe problems related to the reliability of the garnet–clinopyroxene Fe–Mg exchange thermometer to omphacite‐bearing assemblages. Likewise, reliable geobarometers for eclogites and related HP/UHP rocks are scarce. In this paper, a set of internally consistent geothermobarometric expressions have been formulated for reactions between the UHP assemblage garnet–clinopyroxene–kyanite–phengite–coesite, and the corresponding HP assemblage garnet–clinopyroxene–kyanite–phengite–quartz. In the system KCMASH, the end members grossular (Grs) and pyrope (Prp) in garnet, diopside (Di) in clinopyroxene, muscovite (Ms) and celadonite (Cel) in phengite together with kyanite and coesite or quartz define invariant points in the coesite and quartz stability field, respectively, depending on which SiO2 polymorph is stable. Thus, a set of net transfer reactions including these end members will uniquely define equilibrium temperatures and pressures for phengite–kyanite–SiO2‐bearing eclogites. Application to relevant eclogites from various localities worldwide show good consistency with petrographic evidence. Eclogites containing either coesite or polycrystalline quartz after coesite all plot within the coesite stability field, while typical quartz‐bearing eclogites with no evidence of former coesite fall within the quartz stability field. Diamondiferous coesite–kyanite eclogite and grospydite xenoliths in kimberlites all fall into the diamond stability field. The present method also yields consistent values as compared with the garnet–clinopyroxene Fe–Mg geothermometer for these kinds of rocks, but also indicates some unsystematic scatter of the latter thermometer. The net transfer geothermobarometric method presented in this paper is suggested to be less affected by later thermal re‐equilibration than common cation exchange thermometers.  相似文献   

16.
The lower-crustal rocks of the Kohistan complex (northern Pakistan) are mostly composed of metabasic rocks such as pyroxene granulites, garnet granulites and amphibolites. We have investigated P–T trajectories of the relic two-pyroxene granulites, which are the protolith of the amphibolites within the Kamila amphibolite belt. Aluminous pyroxene retains igneous textures such as exsolution lamellae developed in the core. The significant amount of Al in clinopyroxene is buffered by breakdown reactions of plagioclase accompanied by film-like quartz as a product at grain boundaries between plagioclase and clinopyroxene. Distinct Al zoning profiles are preserved in pyroxene with exsolution lamellae in the core and in plagioclase adjacent to clinopyroxene in pyroxene granulites. In the northern part of the Kamila amphibolite belt, Al in clinopyroxene increases towards the rim and abruptly decreases at the outer rim, and anorthite in plagioclase decreases towards the rim and abruptly increases near the grain boundary between plagioclase and clinopyroxene. In the southern part of the Kamila amphibolite belt, Al in clinopyroxene and anorthite in plagioclase simply increase towards the margins of the grains. The anorthite zoning in plagioclase is in agreement with the zoning profiles of Ca-Tschermaks and jadeite components inferred from variations of Al, Na, Ti and Fe3+ in clinopyroxene. Assuming that the growth surface between them was in equilibrium, geothermobarometry based on Al zoning in clinopyroxene coexisting with plagioclase indicates that metamorphic pressures significantly increased with increasing temperature under granulite facies metamorphism. The peak of granulite facies metamorphism occurred at conditions of about 800 °C and 800–1100 MPa. These prograde P–T paths represent a crustal thickening process of the Kohistan arc during the Early to Middle Cretaceous. The crustal thickening of the Kohistan arc was caused by accretion of basaltic magma at mid-crustal depths.  相似文献   

17.
在一些俯冲/碰撞造山带中,高压麻粒岩相变质作用通常伴随着广泛的深熔作用。本文以柴北缘超高压变质带都兰地区的基性高压麻粒岩和浅色体为研究对象,在详细的野外观察的基础上,结合岩相学和年代学等研究方法,探讨高压麻粒岩相变质作用与深熔作用的关系及形成机制。从野外关系来看,浅色体主要呈层状、似脉状、补丁状或网络状分布在暗色的基性高压麻粒岩(残留体,residuumormelanosome)中,或与基性高压麻粒岩在露头上互层产出,并显示出混合岩的特征。基性高压麻粒岩主要由石榴子石、单斜辉石、斜长石和石英等矿物组成,在不同样品中还可含有少量蓝晶石、角闪石、金红石、黝帘石/斜黝帘石、黑云母、方柱石、绿泥石;浅色体主要由斜长石、钾长石和石英等矿物组成,一些样品中也含有少量的石榴子石和蓝晶石,与典型的长英质高压麻粒岩的矿物组合特征较为相似。锆石成因年代学结果显示浅色体中既发育深熔锆石,也有变质锆石生长,但两种锆石给出的年龄结果基本一致,其加权平均年龄为434±2Ma(MSWD=1.1),与前人获得的高压麻粒岩相变质作用和深熔作用时代基本一致。因此,综合野外关系、岩相学、地球化学特征及年代学结果,我们推测高压麻粒岩相变质作用及深熔作用可能形成于同一动力学过程,即在俯冲带的上盘环境,(变)基性岩石中的含水矿物(如角闪石、帘石或云母类矿物等)脱水熔融形成高Sr/Y熔体,而基性高压麻粒岩为残留体。  相似文献   

18.
The Fuping Complex and the adjoining Wutai and Hengshan Complexes are located in the central zone of the North China craton. The dominant rock types in the Fuping Complex are high‐grade tonalitic–trondhjemitic–granodioritic (TTG) gneisses, with minor amounts of mafic granulites, syntectonic granitic rocks and supracrustal rocks. The petrological evidence from the mafic granulites indicates three stages of metamorphic evolution. The M1 stage is represented by garnet porphyroblasts and matrix plagioclase, quartz, orthopyroxene, clinopyroxene and hornblende. Orthopyroxene+plagioclase symplectites and clinopyroxene+plagioclase±orthopyroxene coronas formed in response to decompression during M2 following the peak metamorphism at M1. Hornblende+plagioclase symplectites formed as a result of further isobaric cooling and retrograde metamorphism during M3. The P–T estimates using TWQ thermobarometry are: 900–950 °C and 8.0–8.5 kbar for the peak assemblage (M1), based on the core compositions of garnet, matrix pyroxene and plagioclase; 700–800 °C and 6.0–7.0 kbar for the pyroxene+plagioclase symplectites or coronas (M2); and 550–650 °C and 5.3–6.3 kbar for the hornblende+plagioclase symplectites (M3), based on garnet rim and corresponding symplectic mineral compositions. These P–T estimates define a clockwise P–T path involving near‐isothermal decompression for the Fuping Complex, similar to the P–T path estimated for the metapelitic gneisses. The inferred P–T path suggests that the Fuping Complex underwent initial crustal thickening, subsequent exhumation, and finally cooling and retrogression. This tectonothermal path is similar to P–T paths inferred for the Wutai and Hengshan Complexes and other tectonic units in the central zone of the North China craton, but different from anti‐clockwise P–T paths estimated for the basement rocks in the eastern and western zones of the craton. Based on lithological, structural, metamorphic and geochronological data, the eastern and western zones of the craton are considered to represent two different Archean to Paleoproterozoic continental blocks that amalgamated along the central zone at the end of Paleoproterozoic. The P–T paths of the Fuping Complex and other tectonic units in the central zone record the collision between the eastern and western zones that led to the final assembly of the North China craton at c. 1800 Ma.  相似文献   

19.
Petrology of high-pressure granulites from the eastern Himalayan syntaxis   总被引：36，自引：0，他引：36  
The eastern Himalayan syntaxis, situated at the eastern terminus of the Himalayas, is the least-known segment of the Himalayas. Recent research in this area has revealed that the syntaxis consists of the Gangdise, the Yarlung Zangbo, and the Himalayan units, each of which is bounded by faults. The Himalayan unit, the northernmost exposed part of the Indian plate, mainly contains amphibolite facies rocks, marked by the assemblages staurolite+kyanite+plagioclase+biotite+muscovite±sillimanite and garnet+amphibole+plagioclase, in the south; to the north, low- to medium-pressure granulite grade pelitic gneisses and marbles are present and are characterized by the assemblages garnet+sillimanite+K-feldspar+plagioclase or antiperthite+biotite+quartz±spinel±cordierite±orthopyroxene in gneisses, and anorthite+diopside±wollastonite and plagioclase+diopside+quartz+phlogopite+calcite in marbles. Within this unit, the Namula thrust system is a series of moderately north-dipping structures that displaced the granulite facies rocks southwards over the amphibolite facies rocks. High-pressure granulites occur as relics within these granulite facies rocks and contain garnet–kyanite granulite and garnet clinopyroxenite. The peak assemblage of the garnet–kyanite granulite includes garnet (core part)+kyanite+ternary feldspar+quartz+rutile. Sillimanite+garnet (rim part)+K-feldspar+ oligoclase+ilmenite+biotite and spinel+albite+biotite or spinel+cordierite±orthopyroxene, which are coronas around sillimanite and garnet, are retrograde products of this peak assemblage. Another peak assemblage includes very-high-Ca garnet (CaO 32–34 wt%, Alm10±Grs>80) and diopside (CaO 22–24 wt%), scapolite, meionite, quartz, and accessory Al-bearing titanite (Al2O3 4–4.5 wt%). The diopside has kink bands. Partial or complete breakdown of Ca-rich garnet during post-peak metamorphism produced pseudomorphs and coronas consisting of fine-grained symplectic intergrowths of hedenbergite and anorthite. Thermobarometric estimates in combination with reaction textures, mineral compositions, and recent experimental studies indicate that these peak assemblages were formed at P=c. 1.7–1.8 GPa, T =c. 890 °C, and the retrograde assemblages experienced near-isothermal decompression to P=0.5±0.1 GPa, T =850±50 °C. The whole-rock compositions indicate that marble and pelite are plausible candidates for the protoliths. These facts suggest the following (1) sedimentary rocks were transported to upper-mantle depths and equilibrated at those conditions to form these high-pressure granulites, which were then emplaced into the crust quickly. During the rapid exhumation of these rocks, the earlier high-pressure assemblages were overprinted by the later low- to medium-pressure assemblages, that is, the high-pressure granulite belt formed in the syntaxis. (2) The Namula thrust system is an important tectonic boundary in the syntaxis, or even in the Higher Himalaya more generally.  相似文献   

20.
A re‐evaluation of the P–T history of eclogite within the East Athabasca granulite terrane of the Snowbird tectonic zone, northern Saskatchewan, Canada was undertaken. Using calculated pseudosections in combination with new garnet–clinopyroxene and zircon and rutile trace element thermometry, peak metamorphic conditions are constrained to ～16 kbar and 750 °C, followed by near‐isothermal decompression to ～10 kbar. Associated with the eclogite are two types of occurrences of sapphirine‐bearing rocks preserving a rich variety of reaction textures that allow examination of the retrograde history below 10 kbar. The first occurs as a 1–2 m zone adjacent to the eclogite body with a peak assemblage of garnet–kyanite–quartz interpreted to have formed during the eclogite facies metamorphism. Rims of orthopyroxene and plagioclase developed around garnet, and sapphirine–plagioclase and spinel–plagioclase symplectites developed around kyanite. The second variety of sapphirine‐bearing rocks occurs in kyanite veins within the eclogite. The veins involve orthopyroxene, garnet and plagioclase layers spatially organized around a central kyanite layer that are interpreted to have formed following the eclogite facies metamorphism. The layering has itself been modified, with, in particular, kyanite being replaced by sapphirine–plagioclase, spinel–plagioclase and corundum–plagioclase symplectites, as well as the kyanite being replaced by sillimanite. Petrological modelling in the CFMAS system examining chemical potential gradients between kyanite and surrounding quartz indicates that these vein textures probably formed during further essentially isothermal decompression, ultimately reaching ～7 kbar and 750 °C. These results indicate that the final reaction in these rocks occurred at mid‐crustal levels at upper amphibolite facies conditions. Previous geochronological and thermochronological constraints bracket the time interval of decompression to <5–10 Myr, indicating that ～25 km of exhumation took place during this interval. This corresponds to minimum unroofing rates of ～2–5 mm year?1 following eclogite facies metamorphism, after which the rocks resided at mid‐crustal levels for 80–100 Myr.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号