首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
An inventory of 846 mass movements, mainly landslides, in two alpine regions of southwest New Zealand was created to explore the geomorphic impacts of slope‐failure processes on river channels and valley floors. In total, 213 (i.e. 27 per cent) of the slope failures descended to valley floors, affecting the geomorphology of trunk channels (catchment area AC > 10 km2) and valley floors in recurring patterns. A nominal classification system is introduced for characterizing (a) the physical contact nature between landslides and river channels, and (b) the resulting geomorphic consequences for drainage. Although landslide area A is useful for estimating the length of channel directly impacted by debris, it does not necessarily predict the direction of fluvial response or type of impact. Dominant persistent geomorphic imprints of bedrock landslides include channel occlusions and landslide dams in South Westland and Fiordland, respectively. Differences in size distribution and geomorphic effects on river systems between the two study regions are attributed to bedrock geology, tectonics and sediment flux. Although South Westland rivers are more frequently affected by landslides, disrupting long‐term effects such as blockage are more persistent in Fiordland. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

2.
The tectonically stable central highlands of Sri Lanka and its alluvial valleys are the source areas and sinks, respectively, for one of the most prolific Quaternary gemstone provinces in the world. However, the known 10Be/26Al cosmogenic‐nuclide‐determined low natural (preanthropogenic) denudation rates of 2–11 mm kyr?1, and resulting sediment fluxes, are grossly inadequate to deliver the vast throughputs of overburden required to concentrate the known gemstone deposits. Basin‐wide, unstable, slow‐moving channelized landslides and debris flows, aided by biotic factors, are the dominant mechanisms of mass‐wasting on hill‐slopes and bulk delivery of sediment to the alluvial valleys and fluvial networks. Channelization ensures modulated sediment transfer and run‐out during an erosional–depositional continuum. In a selected inventory of landslides, mobilized sediment volumes ranged from less than 1000 cubic metres to a maximum of ～800 000 cubic metres per event. Monsoonal rainfall (both cumulative seasonal and total daily thresholds) is the primary external factor, which interacts with colluvium thickness and steep slopes in triggering landslides. There are three to five ‘threshold’ rainfall events per year in the highlands that can be expected to generate landslides. They can occur under conditions of decreasing daily rainfall as the seasonal total rainfall increases. GIS databases show a very significant spatial overlap and direct causal linkage between several hundred landslide occurrences and the innumerable gem pits and mines in the catchments of the best known mining region of Sri Lanka. Landslide‐associated mass movements, besides providing significant numbers of gemstones to the alluvial valleys over time, are also a fundamental factor in the geomorphic evolution of the rugged central highland landscape. Rainfall‐driven landslide activity may be a natural geological response affecting erosional equilibrium in high‐relief tectonically stable terrains. Climatically forced base level changes will, over time, control sediment storage, removal or reworking in the valleys. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

3.
The volumes, rates and grain size distributions of sediment supplied from hillslopes represent the initial input of sediment delivered from upland areas and propagated through sediment routing systems. Moreover, hillslope sediment supply has a significant impact on landscape response time to tectonic and climatic perturbations. However, there are very few detailed field studies characterizing hillslope sediment supply as a function of lithology and delivery process. Here, we present new empirical data from tectonically‐active areas in southern Italy that quantifies how lithology and rock strength control the landslide fluxes and grain size distributions supplied from hillslopes. Landslides are the major source of hillslope sediment supply in this area, and our inventory of ~2800 landslides reveals that landslide sediment flux is dominated by small, shallow landslides. We find that lithology and rock strength modulate the abundance of steep slopes and landslides, and the distribution of landslide sizes. Outcrop‐scale rock strength also controls the grain sizes supplied by bedrock weathering, and influences the degree of coarsening of landslide supply with respect to weathering supply. Finally, we show that hillslope sediment supply largely determines the grain sizes of fluvial export, from catchments and that catchments with greater long‐term landslide rates deliver coarser material. Therefore, our results demonstrate a dual control of lithology on hillslope sediment supply, by modulating both the sediment fluxes from landslides and the grain sizes supplied by hillslopes to the fluvial system. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

4.
The ongoing debate over the effects of global environmental change on Earth's cryosphere calls for detailed knowledge about process rates and their variability in cold environments. In this context, appraisals of the coupling between glacier dynamics and para‐glacial erosion rates in tectonically active mountains remain rare. We contribute to filling this knowledge gap and present an unprecedented regional‐scale inventory of supra‐glacial sediment flux and hillslope erosion rates inferred from an analysis of 123 large (> 0·1 km2) catastrophic bedrock landslides that fell onto glaciers in the Chugach Mountains, Alaska, as documented by satellite images obtained between 1972 to 2008. Assuming these supra‐glacial landslide deposits to be passive strain markers we infer minimum decadal‐scale sediment yields of 190 to 7400 t km–2 yr–1 for a given glacier‐surface cross‐section impacted by episodic rock–slope failure. These rates compare to reported fluvial sediment yields in many mountain rivers, but are an order of magnitude below the extreme sediment yields measured at the snouts of Alaskan glaciers, indicating that the bulk of debris discharged derives from en‐glacial, sub‐glacial or ice‐proximal sources. We estimate an average minimum para‐glacial erosion rate by large, episodic rock–slope failures at 0·5–0·7 mm yr–1 in the Chugach Mountains over a 50‐yr period, with earthquakes likely being responsible for up to 73% of this rate. Though ranking amongst the highest decadal landslide erosion rates for this size of study area worldwide, our inferred rates of hillslope erosion in the Chugach Mountains remain an order of magnitude below the pace of extremely rapid glacial sediment export and glacio‐isostatic surface uplift previously reported from the region. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

5.
Climate change, manifested by an increase in mean, minimum, and maximum temperatures and by more intense rainstorms, is becoming more evident in many regions. An important consequence of these changes may be an increase in landslides in high mountains. More research, however, is necessary to detect changes in landslide magnitude and frequency related to contemporary climate, particularly in alpine regions hosting glaciers, permafrost, and snow. These regions not only are sensitive to changes in both temperature and precipitation, but are also areas in which landslides are ubiquitous even under a stable climate. We analyze a series of catastrophic slope failures that occurred in the mountains of Europe, the Americas, and the Caucasus since the end of the 1990s. We distinguish between rock and ice avalanches, debris flows from de‐glaciated areas, and landslides that involve dynamic interactions with glacial and river processes. Analysis of these events indicates several important controls on slope stability in high mountains, including: the non‐linear response of firn and ice to warming; three‐dimensional warming of subsurface bedrock and its relation to site geology; de‐glaciation accompanied by exposure of new sediment; and combined short‐term effects of precipitation and temperature. Based on several case studies, we propose that the following mechanisms can significantly alter landslide magnitude and frequency, and thus hazard, under warming conditions: (1) positive feedbacks acting on mass movement processes that after an initial climatic stimulus may evolve independently of climate change; (2) threshold behavior and tipping points in geomorphic systems; (3) storage of sediment and ice involving important lag‐time effects. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

6.
A high‐magnitude flash flood, which took place on 25 October 2011 in the Magra River catchment (1717 km2), central‐northern Italy, is used to illustrate some aspects of the geomorphic response to the flood. An overall methodological framework is described for using interlinked observations and analyses of the geomorphic impacts of an extreme event. The following methods and analyses were carried out: (i) hydrological and hydraulic analysis of the event; (ii) sediment delivery by event landslide mapping; (iii) identification and estimation of wood recruitment, deposition, and budgeting; (iv) interpretation of morphological processes by analysing fluvial deposits; (v) remote sensing and geographic information system (GIS) analysis of channel width changes. In response to the high‐magnitude hydrological event, a large number of landslides occurred, consisting of earth flows, soil slips, and translational slides, and a large quantity of wood was recruited, in most part deriving from floodplain erosion caused by bank retreat and channel widening. The most important impact of the flood event within the valley floor was an impressive widening of the overall channel bed and the reactivation of wide portions of the pre‐event floodplain. Along the investigated (unconfined or partly confined) streams (total investigated length of 93.5 km), the channel width after the flood was up to about 20 times the channel width before the event. The study has shown that a synergic use of different methods and types of evidence provides fundamental information for characterizing and understanding the geomorphic effects of intense flood events. The prediction of geomorphic response to a flood event is still challenging and many limitations exist; however a robust geomorphological analysis can contribute to the identification of the most critical reaches. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

7.
A long‐lasting rainstorm event from 20 to 22 August 2005 affected a large part of the northern Alps and Prealps in Switzerland. It resulted in elevated discharges and flooding in many headwater catchments and mountain rivers. The associated geomorphic processes included shallow landslides, deep‐seated slope instabilities, debris flows, and fluvial sediment transport. In many parts of the affected areas human activities are important, including many buildings, traffic lines and other infrastructure. In the steeper parts, geomorphic processes were mainly responsible for flow overtopping and sediment deposition both in and outside of the channel network. In the lower parts, lateral erosion and exceedance of the channel discharge capacity were the main reasons for morphologic channel modification and flooding. Sediment‐related processes contributed a lot to the overall damage. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

8.
New detailed data about the morphology of the submerged slopes of Lake Albano (Rome, Italy) have been collected by a sonar multibeam survey financed by the Italian Department of Civil Protection. These data allow for investigation of the subaqueous slope dynamics of the lake, which partially fills a volcanic depression, and the elucidation of the relationships between subaqueous and subaerial slope processes. Subaerial, submerged and combined subaerial/submerged landslide‐related morphologies were detected around the inner slopes of the lake. In the submerged slopes, several gravity‐induced landforms were recognized: landslide scar areas, landslide accumulations, erosional chutes and channels, block fields, isolated blocks, scarps and slope breaks. An attempt to evaluate the state of activity of the submerged slopes was carried out by taking into consideration the relative freshness of some selected landforms. Interpretation of bathymetric data, as well as direct surveys of the subaerial slopes, was used to assess the morphometric features and interpret the type of movement of the landslides. We propose a comprehensive classification based on the landslide's size and type of movement. We recognized rock fall/topples, debris flows, rock slides and slump, complex rock slides/channelled flows and debris slide and slump. The volume of the main landslides ranged between 101 and 103 m3, while a few rock and debris slides have volumes ranging between 103 and 105 m3. Two large palaeo‐landslides with volumes on the order of 106 m3 were identified in the southern and northern part of the lake, respectively. Velocities of the recognized landslides range from rapid to extremely rapid. Two main landslide hazard scenarios have been depicted from the results of the integrated analysis of both subaerial and submerged gravity‐induced landforms. The most hazardous scenario involves extremely rapid large volume events (>106 m3) that could, if they interacted with water, induce catastrophic tsunamis. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

9.
The first application of the SHETRAN basin‐scale, landslide erosion and sediment yield model is carried out for a major landsliding event in the upper 505 km2 of the Llobregat basin, in the eastern Spanish Pyrenees, in November 1982. The model simulates the spatial distribution of shallow landslides and their sediment yield. Acknowledging uncertainty in the model parameter evaluation, the aim of the application was not to reproduce the observed occurrence of landslides as accurately as possible with one simulation, but to bracket the observed pattern with several simulations representing uncertainty in the key input conditions. Bounds on the landslide simulations were thus determined as a function of uncertainty in the vegetation root cohesion (used in the model factor of safety calculations). The resulting upper bound considerably overestimates the observed pattern (17 000 landslides compared with an observation of around 700), but it reproduces several of the principal clusters in the observed pattern. The lower bound contains around 500 landslides. The sediment yield estimates (2670–14 630 t km?2) are comparable to measurements elsewhere in the Pyrenees for extreme events. The results demonstrate an ability to simulate the basin‐scale landslide response to a rainfall event and the resulting sediment yield. They also highlight the need for further research in setting the uncertainty bounds and in avoiding large overestimates of landslide occurrence arising in part from a current inability to model small‐scale controls for a basin of the given size. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

10.
A model‐based method is proposed for improving upon existing threshold relationships which define the rainfall conditions for triggering shallow landslides but do not allow the magnitude of landsliding (i.e. the number of landslides) to be determined. The SHETRAN catchment‐scale shallow landslide model is used to quantify the magnitude of landsliding as a function of rainfall return period, for focus sites of 180 and 45 km2 in the Italian Southern Alps and the central Spanish Pyrenees. Rainfall events with intensities of different return period are generated for a range of durations (1‐day to 5‐day) and applied to the model to give the number of landslides triggered and the resulting sediment yield for each event. For a given event duration, simulated numbers of landslides become progressively less sensitive to return period as return period increases. Similarly, for an event of given return period, landslide magnitude becomes less sensitive to event duration as duration increases. The temporal distribution of rainfall within an event is shown to have a significant impact on the number of landslides and the timing of their occurrence. The contribution of shallow landsliding to catchment sediment yield is similarly quantified as a function of the rainfall characteristics. Rainfall intensity–duration curves are presented which define different levels of landsliding magnitude and which advance our predictive capability beyond, but are generally consistent with, published threshold curves. The magnitude curves are relevant to the development of guidelines for landslide hazard assessment and forecasting. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

11.
The duration of the soil‐depth recovery needed for reoccurrence of shallow colluvial landslides at a given site in humid regions is much longer than the return period of rainfall needed to generate sufficient pore water pressure to initiate a landslide. Knowledge of the rate of change in soil depth in landslide scars is therefore necessary to evaluate return intervals of landslides. Spatial variation in sediment transport at the Kumanodaira landslide scar in central Japan was investigated by field observations. Spatial distribution of the rate of change in soil depth was estimated using sediment transport data and geographic information system (GIS) analysis. Observations revealed that the timing of sediment transport differed for shallow and deep soil layers. Near‐surface sediment transport (mostly dry ravel and some shallow soil creep at depths ≤0·05 m) measured in sediment traps was active in winter and early spring and was affected by freezing–thawing; soil creep of subsoil (i.e. >0·05 m), monitored by strain probes, was active in summer and autumn when precipitation was abundant. Near‐surface sediment flux was estimated by a power law function of slope gradient. Deeper soil creep was more affected by relative location to the landslide scar, which influences soil depth, than by slope gradient. Our study indicated that the rate of soil‐depth recovery is high just below the head scarp of the landslide. Abrupt changes in the longitudinal slope topography immediately above, within and just below the head scarp became smoother with time due to degradation proximate to the landslide head scarp and flanks, as well as aggradation just below the head scarp. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

12.
We discuss a geographic information system (GIS)‐based methodology for rock slope instability assessment based on geometrical relationships between topographic slopes and structural discontinuities in rocks. The methodology involves (a) regionalization of point observations of orientations (azimuth and dip) of structural discontinuities in rocks in order to generate a digital structural model (DStM), (b) testing the kinematical possibility of specific modes of rock slope failures by integrating DStMs and digital elevation model (DEM)‐derived slope and aspect data and (c) computation of stability scenarios with respect to identified rock slope failure modes. We tested the methodology in an area of 90 km2 in Darjeeling Himalaya (India) and in a small portion (9 km2) within this area with higher density of field structural orientation data. The results of the study show better classification of rock slope instability in the smaller area with respect to known occurrences of deep‐seated rockslides than with respect to shallow translational rockslides, implying that structural control is more important for deep‐seated rockslides than for shallow translational rockslides. Results of scenario‐based analysis show that, in rock slopes classified to be unstable, stress‐induced rock slope instability tends to increase with increasing level of water saturation. The study demonstrates the usefulness of spatially distributed data of orientations of structural discontinuities in rocks for medium‐ to small‐scale classification of rock slope instability in mountainous terrains. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

13.
A hydrology–sediment modelling framework based on the model Topkapi-ETH combined with basin geomorphic mapping is used to investigate the role of localized sediment sources in a mountain river basin (Kleine Emme, Switzerland). The periodic sediment mobilization from incised areas and landslides by hillslope runoff and river discharge is simulated in addition to overland flow erosion to quantify their contributions to suspended sediment fluxes. The framework simulates the suspended sediment load provenance at the outlet and its temporal dynamics, by routing fine sediment along topographically driven pathways from the distinct sediment sources to the outlet. We show that accounting for localized sediment sources substantially improves the modelling of observed sediment concentrations and loads at the outlet compared to overland flow erosion alone. We demonstrate that the modelled river basin can shift between channel-process and hillslope-process dominant behaviour depending on the model parameter describing gully competence on landslide surfaces. The simulations in which channel processes dominate were found to be more consistent with observations, and with two independent validations in the Kleine Emme, by topographic analysis of surface roughness and by sediment tracing with 10 Be concentrations. This research shows that spatially explicit modelling can be used to infer the dominant sediment production process in a river basin, to inform and optimize sediment sampling strategies for denudation rate estimates, and in general to support sediment provenance studies. © 2020 John Wiley & Sons, Ltd.  相似文献   

14.
We examined the characteristics of landslides triggered by the 2016 Kumamoto earthquake (Mw = 7.0: focal depth=10.0 km) in forests and grasslands within two affected watersheds (Tokosegawa: 6.9 km2 and Nigorigawa: 6.1 km2) in southwestern Japan. We identified 190 landslides using aerial photographs and analyzed their sizes by geographic information system (GIS). Field investigations were conducted to obtain landslide depth, volume and residual sediment for 38 selected landslides (21 in forests and 17 in grasslands). The minimum area of detected landslides in grasslands (400 m2) was smaller than in forests (1000 m2), probably because of reduced detectability of landslides under tree cover. The ratio of total area occupied by landslides for a given range of slope gradient in the watersheds increased from 3.2% on gentle grassland slopes (10–15°) to 15.5% on steep (>45°) slopes, whereas the maximum landslide-area ratio in forest sites (7.4%) occurred on relatively gentle slopes (25–30°). Estimated landslide volume ranged from 27 to 9622 m3, based on mean depth of each landslide measured around individual landslide scars. Moreover, the volumetric ratio of landslide deposit volume to total landslide volume exceeded 100% for 48% of the landslides within forests and 35% of the landslides within grasslands. Our findings show that land cover had extensive and recognizable effects on the characteristics of landslides and resulting in-channel sediment accumulations. Resetting sediment dynamics after earthquakes associated with different land cover distributions needs to be considered within watersheds. © 2019 John Wiley & Sons, Ltd.  相似文献   

15.
Landscape form represents the cumulative effects of de‐stabilizing events relative to recovery processes. Most geomorphic research has focused on the role of episodic rare events on landscape form with less attention paid to the role and persistence of chronic inputs. To better establish the interplay between chronic and episodic extreme events at regional scales, we used aerial photography and post‐flood sediment sampling to assess stream and hillslope response and recovery to a 100–300 yr. flood caused by Tropical Storm Irene in New England. Within a 14 000 km2 study area, analysis of aerial photographs indicated that the storm initiated (n = 534) and reactivated (n = 460) a large number of landslides. These landslides dramatically increased overall estimates of regional erosion rates (from 0.0023 mm/yr. without Irene to 0.0072 mm/yr. with Irene). Similarly, Irene‐generated LWD inputs of 0.25–0.5 trees/km exceeded annual background rates in a single event, and these concentrated inputs (101–102 of trees/landslide) are likely to result in large jams and snags that are particularly persistent and geomorphically effective. Finally, we found that landslide scars continue to provide elevated sediment inputs years after the event, as evidenced by sustained higher suspended sediment concentrations in streams with Irene‐generated landslides. Overall, our results indicate that infrequent, high‐magnitude events have a more important geomorphic role in tectonically stable, more moderate‐relief systems than has been previously recognized. Understanding the role of these events has particular relevance in regions such as New England, where the frequency and magnitude of extreme storms is expected to increase. Further, these effects may force reconsideration of conservation and restoration targets (for example in channel form and large wood loading and distribution) in fluvial systems. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

16.
Structural settings and lithological characteristics are traditionally assumed to influence the development of erosional landforms, such as gully networks and rock couloirs, in steep mountain rock basins. The structural control of erosion of two small alpine catchments of distinctive rock types is evaluated by comparing the correspondences between the orientations of their gullies and rock couloirs with (1) the sliding orientations of potential slope failures mechanisms, and (2) the orientation of the maximum joint frequency, this latter being considered as the direction exploited primarily by erosion and mass wasting processes. These characteristic orientations can be interpreted as structural weaknesses contributing to the initiation and propagation of erosion. The morphostructural analysis was performed using digital elevation models and field observations. The catchment comprised of magmatic intrusive rocks shows a clear structural control, mostly expressed through potential wedges failure. Such joint configurations have a particular geometry that encourages the development of gullies in hard rock, e.g. through enhanced gravitational and hydrological erosional processes. In the catchment underlain by sedimentary rocks, penetrative joints that act as structural weaknesses seem to be exploited by gullies and rock couloirs. However, the lithological setting and bedding configuration prominently control the development of erosional landforms, and influence not only the local pattern of geomorphic features, but the general morphology of the catchment. The orientations of the maximum joint frequency are clearly associated with the gully network, suggesting that its development is governed by anisotropy in rock strength. These two catchments are typical of bedrock‐dominated basins prone to intense processes of debris supply. This study suggests a quantitative approach for describing the relationship between bedrock jointing and geomorphic features geometry. Incorporation of bedrock structure can be relevant when studying processes governing the transfer of clastic material, for the assessment of sediment yields and in landforms evolution models. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
Large, deep‐seated landslides are common throughout the south‐eastern San Juan Mountains of Colorado and New Mexico, but their timing and initiation are not well understood. Determining when the landslides occurred would aid in clarifying the mechanisms for initiating landslides in the region and would help us to understand post‐glacial landscape evolution. We studied seven pre‐historic landslides located within the Tertiary volcanic rocks of the San Juan Volcanic Field. The landslides range in area from ~0.8 km2 to ~11.3 km2 and most are located in areas that were previously mapped as having been ice‐covered during the last glaciation. Landslide deposits were dated using a variety of methods including surface exposure dating (chlorine‐36, 36Cl), radiocarbon dating of basal bog sediments and organic material buried in soils, and relative soil development. The resulting limiting ages range from approximately 14 ka to 2 ka and show that deep‐seated landsliding has occurred throughout the post‐glacial period. This broad range in ages is inconsistent with our initial hypothesis, which proposed that landslides were likely the result of debuttressing of glacial walls during glacial retreat. Furthermore, the timing of landslides does not seem to correlate with documented post‐glacial climatic shifts. Therefore, we conclude that landsliding in the region was the result of wetter than normal periods lasting months to years acting on weak bedrock preconditioned to failure and prepared by glacial debuttressing. Our findings suggest that the study area is likely still susceptible to deep‐seated landsliding and may become even more prone to large‐scale slope failure if future climate change increases precipitation in the San Juan Mountains. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

18.
The extrapolation of results from field trials to larger areas of land for purposes of regional impact assessment is an important issue in geomorphology, particularly for landform properties that show high stochastic variability in space and time, such as shallow landslide erosion. It is shown in this study, that by identifying the main driver for spatial variability in shallow landslide erosion at field scales, namely slope angle, it is possible to develop a set of generic functions for assessing the impact of landslides on selected soil properties at larger spatial scales and over longer time periods. Research was conducted within an area of pastoral soft‐rock Tertiary hill country in the North Island of New Zealand that is subject to infrequent high intensity rainfall events, producing numerous landslides, most of which are smaller than several hundred square metres in size and remove soil to shallow depths. All landslides were mapped within a 0·6 km2 area and registered to a high resolution (2 m) slope map to show that few landslides occur on slopes < 20° and 95% were on slopes > 24°. The areal density of landslides from all historical events showed an approximately linear increase with slope above 24°. Integrating landslide densities with soil recovery data demonstrates that the average value of a soil property fluctuates in a ‘saw‐tooth’ fashion through time with the overall shape of the curve controlled by the frequency of landslide inducing storm events and recovery rate of the soil property between events. Despite such fluctuations, there are gradual declines of 7·5% in average total carbon content of topsoil and 9·5% in average soil depth to bedrock, since the time of forest clearance. Results have application to large‐scale sediment budget and water quality models and to the New Zealand Soil Carbon Monitoring System (CMS). Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

19.
Mountain rivers respond to strong earthquakes by rapidly aggrading to accommodate excess sediment delivered by co-seismic landslides. Detailed sediment budgets indicate that rivers need several years to decades to recover from seismic disturbances, depending on how recovery is defined. We examine three principal proxies of river recovery after earthquake-induced sediment pulses around Pokhara, Nepal's second largest city. Freshly exhumed cohorts of floodplain trees in growth position indicate rapid and pulsed sedimentation that formed a fan covering 150 km2 in a Lesser Himalayan basin with tens of metres of debris between the 11th and 15th centuries AD. Radiocarbon dates of buried trees are consistent with those of nearby valley deposits linked to major medieval earthquakes, such that we can estimate average rates of re-incision since. We combine high-resolution digital elevation data, geodetic field surveys, aerial photos, and dated tree trunks to reconstruct geomorphic marker surfaces. The volumes of sediment relative to these surfaces require average net sediment yields of up to 4200 t km–2 yr–1 for the 650 years since the last inferred earthquake-triggered sediment pulse. The lithological composition of channel bedload differs from that of local bedrock, confirming that rivers are still mostly evacuating medieval valley fills, locally incising at rates of up to 0.2 m yr–1. Pronounced knickpoints and epigenetic gorges at tributary junctions further illustrate the protracted fluvial response; only the distal portions of the earthquake-derived sediment wedges have been cut to near their base. Our results challenge the notion that mountain rivers recover speedily from earthquakes within years to decades. The valley fills around Pokhara show that even highly erosive Himalayan rivers may need more than several centuries to adjust to catastrophic perturbations. Our results motivate some rethinking of post-seismic hazard appraisals and infrastructural planning in active mountain regions. © 2018 John Wiley & Sons, Ltd.  相似文献   

20.
Landslides and rockfalls are key geomorphic processes in mountain basins. Their quantification and characterization are critical for understanding the processes of slope failure and their contributions to erosion and landscape evolution. We used digital photogrammetry to produce a multi‐temporal record of erosion (1963–2005) of a rock slope at the head of the Illgraben, a very active catchment prone to debris flows in Switzerland. Slope failures affect 70% of the study slope and erode the slope at an average rate of 0.39 ± 0.03 m yr¯¹. The analysis of individual slope failures yielded an inventory of ~2500 failures ranging over 6 orders of magnitude in volume, despite the small slope area and short study period. The slope failures form a characteristic magnitude–frequency distribution with a rollover and a power‐law tail between ~200 m³ and 1.6 × 106 m³ with an exponent of 1.65. Slope failure volume scales with area as a power law with an exponent of 1.1. Both values are low for studies of bedrock landslides and rockfall and result from the highly fractured and weathered state of the quartzitic bedrock. Our data suggest that the magnitude–frequency distribution is the result of two separate slope failure processes. Type (1) failures are frequent, small slides and slumps within the weathered layer of highly fractured rock and loose sediment, and make up the rollover. Type (2) failures are less frequent and larger rockslides and rockfalls within the internal bedded and fractured slope along pre‐determined potential failure surfaces, and make up the power‐law tail. Rockslides and rockfalls of high magnitude and relatively low frequency make up 99% of the total failure volume and are thus responsible for the high erosion rate. They are also significant in the context of landscape evolution as they occur on slopes above 45° and limit the relief of the slope. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号