首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The extrapolation of results from field trials to larger areas of land for purposes of regional impact assessment is an important issue in geomorphology, particularly for landform properties that show high stochastic variability in space and time, such as shallow landslide erosion. It is shown in this study, that by identifying the main driver for spatial variability in shallow landslide erosion at field scales, namely slope angle, it is possible to develop a set of generic functions for assessing the impact of landslides on selected soil properties at larger spatial scales and over longer time periods. Research was conducted within an area of pastoral soft‐rock Tertiary hill country in the North Island of New Zealand that is subject to infrequent high intensity rainfall events, producing numerous landslides, most of which are smaller than several hundred square metres in size and remove soil to shallow depths. All landslides were mapped within a 0·6 km2 area and registered to a high resolution (2 m) slope map to show that few landslides occur on slopes < 20° and 95% were on slopes > 24°. The areal density of landslides from all historical events showed an approximately linear increase with slope above 24°. Integrating landslide densities with soil recovery data demonstrates that the average value of a soil property fluctuates in a ‘saw‐tooth’ fashion through time with the overall shape of the curve controlled by the frequency of landslide inducing storm events and recovery rate of the soil property between events. Despite such fluctuations, there are gradual declines of 7·5% in average total carbon content of topsoil and 9·5% in average soil depth to bedrock, since the time of forest clearance. Results have application to large‐scale sediment budget and water quality models and to the New Zealand Soil Carbon Monitoring System (CMS). Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

2.
Landslides and debris flows associated with forest harvesting can cause much destruction and the influence of the timing of harvesting on these mass wasting processes therefore needs to be assessed in order to protect aquatic ecosystems and develop improved strategies for disaster prevention. We examined the effects of forest harvesting on the frequency of landslides and debris flows in the Sanko catchment (central Japan) using nine aerial photo periods covering 1964 to 2003. These photographs showed a mosaic of different forest ages attributable to the rotational management in this area since 1912. Geology and slope gradient are rather uniformly distributed in the Sanko catchment, facilitating assessment of forest harvesting effects on mass wasting without complication of other factors. Trends of new landslides and debris flows correspond to changes in slope stability explained by root strength decay and recovery; the direct impact of clearcutting on landslide occurrence was greatest in forest stands that were clearcut 1 to 10 yr earlier with progressively lesser impacts continuing up to 25 yr after harvesting. Sediment supply rate from landslides in forests clearcut 1 to 10 yr earlier was about 10‐fold higher than in control sites. Total landslide volume in forest stands clearcut 0 to 25 yr earlier was 5·8 × 103 m3 km?2 compared with 1·3 × 103 m3 km?2 in clearcuts >25 yr, indicating a fourfold increase compared with control sites during the period when harvesting affected slope stability. Because landslide scars continue to produce sediment after initial failure, sediment supply from landslides continues for 45 yr in the Sanko catchment. To estimate the effect of forest harvesting and subsequent regeneration on the occurrence of mass wasting in other regions, changes in root strength caused by decay and recovery of roots should be investigated for various species and environmental conditions. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

3.
Sediments produced by landslides are crucial in the sediment yield of a catchment, debris flow forecasting, and related hazard assessment. On a regional scale, however, it is difficult and time consuming to measure the volumes of such sediment. This paper uses a LiDAR‐derived digital terrain model (DTM) taken in 2005 and 2010 (at 2 m resolution) to accurately obtain landslide‐induced sediment volumes that resulted from a single catastrophic typhoon event in a heavily forested mountainous area of Taiwan. The landslides induced by Typhoon Morakot are mapped by comparison of 25 cm resolution aerial photographs taken before and after the typhoon in an 83.6 km2 study area. Each landslide volume is calculated by subtraction of the 2005 DTM from the 2010 DTM, and the scaling relationship between landslide area and its volume are further regressed. The relationship between volume and area are also determined for all the disturbed areas (VL = 0.452AL1.242) and for the crown areas of the landslides (VL = 2.510AL1.206). The uncertainty in estimated volume caused by use of the LiDAR DTMs is discussed, and the error in absolute volume estimation for landslides with an area >105 m2 is within 20%. The volume–area relationship obtained in this study is also validated in 11 small to medium‐sized catchments located outside the study area, and there is good agreement between the calculation from DTMs and the regression formula. By comparison of debris volumes estimated in this study with previous work, it is found that a wider volume variation exists that is directly proportional to the landslide area, especially under a higher scaling exponent. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

4.
The 2013-04-20 Lushan earthquake(seismic magnitude Ms 7.0 according to the State Seismological Bureau)induced a large number of landslides.In this study,spatial characteristics of landslides are developed by interpreting digital aerial photography data.Seven towns near the epicenter,with an area of about 11.11 km2,were severely affected by the earthquake,and 703 landslides were identified from April 24,2013 aerial photography data over an area of 1.185 km2.About 55.56% of the landslide area was less than 1000 m2,whereas about 3.23 % was more than 10,000 m2.Rock falls and shallow landslides were the most commonly observed types in the study area,and were primarily located in the center of Lushan County.Most landslide areas were widely distributed near river channels and along roads.Five main factors were chosen to study the distribution characteristics of landslides:elevation,slope gradients,fault,geologic unit and river system.The spatial distribution of coseismal landslides is studied statistically using both landslide point density(LPD),defined as the number of landslides(LS Number)per square kilometer,and landslide area density(LAD),interpreted as the percentage of landslides area affected by earthquake.The results show that both LPD and LAD have strong positive correlations with five main factors.Most landslides occurred in the gradient range of 40°-50° and an elevation range of 1.0-1.5 km above sea level.Statistical results also indicate that landslides were mainly formed in soft rocks such as mudstone and sandstone,and concentrated in IX intensity areas.  相似文献   

5.
A complete landslide inventory and attribute database is the importantly fundamental for the study of the earthquake-induced landslide. Substantial landslides were triggered by the MW7.9 Wenchuan earthquake on May 12th, 2008. Google Earth images of pre- and post-earthquakes show that 52 194 co-seismic landslides were recognized and mapped, with a total landslides area of 1 021 km2.Based on the statistics,we assigned all landslide parameters and established the co-seismic landslides database, which includes area, length, and width of landslides, elevation of the scarp top and foot edge, and the top and bottom elevations of each located slope. Finally, the spatial distribution and the above attribute parameters of landslides were analyzed. The results show that the spatial distribution of the co-seismic landslides is extremely uneven. The landslides that mainly occur in a rectangular area (a width of 30 km of the hanging wall of the Yingxiu-Beichuan fault and a length of 120 km between Yingxiu and Beichuan) are obviously controlled by surface rupture, terrain, and peak ground acceleration. Meanwhile, a large number of small landslides (individual landslide area less than 10 000 m2)contribute less to the total landslides area. The number of landslides larger than 10 000 m2 accounts for 38.7% of the total number of co-seismic landslides, while the area of those landslides account for 88% of the total landslides area. The 52 194 co-seismic landslides are caused by bedrock collapse that usually consists of three parts:source area, transport area, and accumulation area. However, based on the area-volume power-law relationship, the resulting regional landslide volume may be much larger than the true landslide volume if the landslide volume is calculated using the influenced area from each landslide.  相似文献   

6.
New detailed data about the morphology of the submerged slopes of Lake Albano (Rome, Italy) have been collected by a sonar multibeam survey financed by the Italian Department of Civil Protection. These data allow for investigation of the subaqueous slope dynamics of the lake, which partially fills a volcanic depression, and the elucidation of the relationships between subaqueous and subaerial slope processes. Subaerial, submerged and combined subaerial/submerged landslide‐related morphologies were detected around the inner slopes of the lake. In the submerged slopes, several gravity‐induced landforms were recognized: landslide scar areas, landslide accumulations, erosional chutes and channels, block fields, isolated blocks, scarps and slope breaks. An attempt to evaluate the state of activity of the submerged slopes was carried out by taking into consideration the relative freshness of some selected landforms. Interpretation of bathymetric data, as well as direct surveys of the subaerial slopes, was used to assess the morphometric features and interpret the type of movement of the landslides. We propose a comprehensive classification based on the landslide's size and type of movement. We recognized rock fall/topples, debris flows, rock slides and slump, complex rock slides/channelled flows and debris slide and slump. The volume of the main landslides ranged between 101 and 103 m3, while a few rock and debris slides have volumes ranging between 103 and 105 m3. Two large palaeo‐landslides with volumes on the order of 106 m3 were identified in the southern and northern part of the lake, respectively. Velocities of the recognized landslides range from rapid to extremely rapid. Two main landslide hazard scenarios have been depicted from the results of the integrated analysis of both subaerial and submerged gravity‐induced landforms. The most hazardous scenario involves extremely rapid large volume events (>106 m3) that could, if they interacted with water, induce catastrophic tsunamis. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

7.
Yuhan Huang  Fahu Li  Wei Wang  Juan Li 《水文研究》2020,34(20):3955-3965
Rill erosion processes on saturated soil slopes are important for understanding erosion hydrodynamics and determining the parameters of rill erosion models. Saturated soil slopes were innovatively created to investigate the rill erosion processes. Rill erosion processes on saturated soil slopes were modelled by using the sediment concentrations determined by sediment transport capacities (STCs) measurement and the sediment concentrations at different rill lengths. Laboratory experiments were performed under varying slope gradients (5°, 10°, 15°, and 20°) and unit-width flow rates (0.33, 0.67, and 1.33 × 10−3 m3 s−1 m−1) to measure sediment concentrations at different rill lengths (1, 2, 4, and 8 m) on saturated soil slopes. The measured sediment concentrations along saturated rills ranged from 134.54 to 1,064.47 kg/m3, and also increased exponentially with rill length similar to non-saturated rills. The model of the rill erosion process in non-saturated soil rills was applicable to that in saturated soil rills. However, the sediment concentration of the rill flow increased much faster, with the increase in rill length, to considerably higher levels at STCs. The saturated soil rills produced 120–560% more sediments than the non-saturated ones. Moreover, the former eroded remarkably faster in the beginning section of the rills, as compared with that on the non-saturated soil slopes. This dataset serves as the basis for determining the erosion parameters in the process-based erosion models on saturated soil slopes.  相似文献   

8.
Extreme sedimentation in Swift Creek, located in the Cascades foothills in NW Washington (48°55′N, 122°16′W), results from erosion of the oversteepened, unvegetated toe of a large (55 hectares) active landslide. Deposition of landslide‐derived sediment has necessitated costly mitigation projects in the channel including annual dredging and temporary sediment traps in an attempt to reduce the risk of flooding and damage to man‐made structures downstream. This study attempts to understand the process of sediment production along with the corresponding erosion rates of the sediment source to help with the development of mitigation plans and construction of optimal sediment reservoirs. The bedload and suspended sediment in the creek are a direct result of the weathering process of the serpentinitic bedrock underlying the landslide. The serpentinite does not weather to smectite clay, as previously thought. Instead, it weathers to asbestiform chrysotile with minor amounts of chlorite, illite and hydrotalcite, all of which occur in clay seeps on the unvegetated surface of the landslide. The chrysotile fibers average 2 µm in length and make up at least 50%, by volume, of the suspended load transported in Swift Creek. This study does not address the environmental or health implications of the asbestiform chrysotile transport or deposition. During the sampled time between February 2005 and February 2006, 127 discrete suspended sediment samples were collected and discharge was measured 66 times. The suspended sediment concentrations ranged from 0·02 g L?1 to 41·6 g L?1 and the discharge ranged from 0·0 m3 s?1 to 0·5 m3 s?1. A nonlinear functional model estimated the total suspended sediment flux from detailed precipitation records and discrete suspended sediment concentration and discharge measurements to be 910 t km?2 yr?1. When the suspended sediment flux is coupled with estimates of downstream deposition of coarse sediment, the estimated erosion rate for the entire Swift Creek landslide is 158 mm yr?1. The majority of the material entering Swift Creek is presumed to originate on the unvegetated toe of the landslide, for which the erosion rate is thus approximately 1 m yr?1. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

9.
This study constructs a preliminary inventory of landslides triggered by the MS 6.8 Luding earthquake based on field investigation and human-computer interaction visual interpretation on optical satellite images. The results show that this earthquake triggered at least 5 007 landslides, with a total landslide area of 17.36 ?km2, of which the smallest landslide area is 65 ?m2 and the largest landslide area reaches 120 747 ?m2, with an average landslide area of about 3 500 ?m2. The obtained landslides are concentrated in the IX intensity zone and the northeast side of the seismogenic fault, and the area density and point density of landslides are 13.8%, and 35.73 ?km?2 peaks with 2 ?km as the search radius. It should be noted that the number of landslides obtained in this paper will be lower than the actual situation because some areas are covered by clouds and there are no available post-earthquake remote sensing images. Based on the available post-earthquake remote sensing images, the number of landslides triggered by this earthquake is roughly estimated to be up to 10 000. This study can be used to support further research on the distribution pattern and risk evaluation of the coseismic landslides in the region, and the prevention and control of landslide hazards in the seismic area.  相似文献   

10.
Two hundred and one debris slides and debris ?ows were analyzed in a 286 km2 study area on the west coast of Vancouver Island, British Columbia, Canada. The study area remains essentially untouched by humans and therefore affords a natural setting in which to examine slope processes. Landslides were identi?ed and characterized on aerial photographs from 1:15 000 to 1:31 680, and were then mapped and transferred to a GIS for analysis. Based on detailed landslide surveys, we propose a new method to accurately determine volume of landslides of this type by measured total area. Results indicate average denudation rates of 56 m3 y?1 km?2, and higher natural rates of failure than analogous regions in coastal British Columbia. In contrast, the landslide rates are substantially less than those from forested watersheds. Landslide distribution is spatially clustered in air photograph epochs, and we propose intense storm cells within regional events as the causal mechanism. Further, failures occurred preferentially over the West Coast Crystalline Complex (by 1·4 times), a metamorphic assemblage of gabbros, schists and amphibolites, but 1·5 times less often over the Island Plutonic Suite, a granitic intrusive formation. The former result represents a new ?nding, while the latter corroborates ?ndings of previous authors. We examined magnitude–frequency relationships of the data set and present for the ?rst time a strong argument that the rollover effect is not merely an artefact, but is instead a consequence of the physical characteristics of the landslides themselves. We subsequently analyzed magnitude–frequency relationships from two other complete data sets from coastal British Columbia and produced a family of curves corroborating this result. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

11.
On 19 September 2003, 40 landslides of 140–18 000 m3 volume occurred within 2·5 km2 on the slopes of Dooncarton Mountain (Republic of Ireland) during a storm that may have exceeded 90 mm within 90 minutes. The landslides were investigated to determine the reasons for such a high density of slope failures. All of the landslides were surveyed within four months, and nine of them were investigated in detail. The six largest landslides, all peat failures, accounted for 57% of the more than 100 000 m3 of material displaced during the event. A consistent sequence of superficial materials was found on the failed hillslopes, including an extensive iron pan at the base of a buried soil horizon 0·3 m below the base of the peat. Morphologically, almost all of the landslides occurred on steep planar slopes or around sharp convexities, with the latter failures developing retrogressively upslope. The only significant relationship found from analysis of 371 subsurface pipes and 142 seepage cracks (defined here as contiguous fissures conducting concentrated subsurface flow) across all the failures was that the thinner the peat cover, the deeper the pipes and seepage cracks occurred below the base of peat. It is concluded that most of the landslides were probably caused by a combination of excess water pressures in the buried soil horizon and the thinner overburden of peat or peaty soil associated with the steeper slope segments. Pipes and seepage cracks formed on the iron pan probably existed prior to the failure event and may have contributed to the high water pressures as rainwater inputs exceeded their discharge capacities. One large peat slide was probably triggered by excess water pressures developed within and between artificial tine cuts. The properties of the blanket peat were generally of little consequence in the occurrence of the landslides, but relict desiccation cracks and other structural weaknesses through the peat mass were probably highly significant. Although several aspects of the peat failures correspond to previously published examples, the context of these failures in terms of the topography and upland catena is distinctive. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

12.
High‐resolution historical (1942) and recent (1994) digital terrain models were derived from aerial photographs along the Big Sur coastline in central California to measure the long‐term volume of material that enters the nearshore environment. During the 52‐year measurement time period, an average of 21 000 ± 3100 m3 km?1 a?1 of material was eroded from nine study sections distributed along the coast, with a low yield of 1000 ± 240 m3 km?1 a?1 and a high of 46 700 ± 7300 m3 km?1 a?1. The results compare well with known volumes from several deep‐seated landslides in the area and suggest that the processes by which material is delivered to the coast are episodic in nature. In addition, a number of parameters are investigated to determine what influences the substantial variation in yield along the coast. It is found that the magnitude of regional coastal landslide sediment yield is primarily related to the physical strength of the slope‐forming material. Coastal Highway 1 runs along the lower portion of the slope along this stretch of coastline, and winter storms frequently damage the highway. The California Department of Transportation is responsible for maintaining this scenic highway while minimizing the impacts to the coastal ecosystems that are part of the Monterey Bay National Marine Sanctuary. This study provides environmental managers with critical background data on the volumes of material that historically enter the nearshore from landslides, as well as demonstrating the application of deriving historical digital terrain data to model landscape evolution. Published in 2005 by John Wiley & Sons, Ltd.  相似文献   

13.
The first application of the SHETRAN basin‐scale, landslide erosion and sediment yield model is carried out for a major landsliding event in the upper 505 km2 of the Llobregat basin, in the eastern Spanish Pyrenees, in November 1982. The model simulates the spatial distribution of shallow landslides and their sediment yield. Acknowledging uncertainty in the model parameter evaluation, the aim of the application was not to reproduce the observed occurrence of landslides as accurately as possible with one simulation, but to bracket the observed pattern with several simulations representing uncertainty in the key input conditions. Bounds on the landslide simulations were thus determined as a function of uncertainty in the vegetation root cohesion (used in the model factor of safety calculations). The resulting upper bound considerably overestimates the observed pattern (17 000 landslides compared with an observation of around 700), but it reproduces several of the principal clusters in the observed pattern. The lower bound contains around 500 landslides. The sediment yield estimates (2670–14 630 t km?2) are comparable to measurements elsewhere in the Pyrenees for extreme events. The results demonstrate an ability to simulate the basin‐scale landslide response to a rainfall event and the resulting sediment yield. They also highlight the need for further research in setting the uncertainty bounds and in avoiding large overestimates of landslide occurrence arising in part from a current inability to model small‐scale controls for a basin of the given size. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

14.
The determination of sediment storage is a critical parameter in sediment budget analyses. But, in many sediment budget studies the quantification of magnitude and time‐scale of sediment storage is still the weakest part and often relies on crude estimations only, especially in large drainage basins (>100 km2). We present a new approach to storage quantification in a meso‐scale alpine catchment of the Swiss Alps (Turtmann Valley, 110 km2). The quantification of depositional volumes was performed by combining geophysical surveys and geographic information system (GIS) modelling techniques. Mean thickness values of each landform type calculated from these data was used to estimate the sediment volume in the hanging valleys and the trough slopes. Sediment volume of the remaining subsystems was determined by modelling an assumed parabolic bedrock surface using digital elevation model (DEM) data. A total sediment volume of 781·3×106–1005·7×106 m3 is deposited in the Turtmann Valley. Over 60% of this volume is stored in the 13 hanging valleys. Moraine landforms contain over 60% of the deposits in the hanging valleys followed by sediment stored on slopes (20%) and rock glaciers (15%). For the first time, a detailed quantification of different storage types was achieved in a catchment of this size. Sediment volumes have been used to calculate mean denudation rates for the different processes ranging from 0·1 to 2·6 mm/a based on a time span of 10 ka. As the quantification approach includes a number of assumptions and various sources of error the values given represent the order of magnitude of sediment storage that has to be expected in a catchment of this size. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

15.
Landslides generate enormous volumes of sediment in mountainous watersheds; however, quantifying the downstream transport of landslide‐derived sediment remains a challenge. Landslide erosion and sediment delivery to the Shihmen Reservoir watershed in Taiwan was estimated using empirical landslide frequency–area and volume–area relationships, empirical landslide runout models, and the Hydrological Simulation Program‐ FORTRAN (HSPF). Landslide erosion rates ranged from 0.4 mm yr‐1 to 2.2 mm yr‐1 during the period 1986–2003, but increased to 7.9 mm yr‐1 following Typhoon Aere in 2004. The percentage of landslide sediment delivered to streams decreased from 78% during the period 1986–1997 to 55% in 2004. Although the delivery ratio was lower, the volume of landslide sediment delivered to streams was 2.81 × 106 Mg yr‐1 in 1986–1997 and 8.60 × 106 Mg yr‐1 in 2004. Model simulations indicate that only a small proportion of the landslide material was delivered downstream. An average of 13% of the landslide material delivered to rivers was moved downstream during the period 1986–1997. In 2004, the period including Typhoon Aere, the annual fluvial sediment yield accounted for approximately 23% of the landslide material delivered to streams. In general, the transfer of sediment in the fluvial system in the Shihmen Reservoir watershed is dominantly transport limited. The imbalance between sediment supply and transport capacity has resulted in a considerable quantity of landslide material remaining in the upper‐stream regions of the watershed. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

16.
The slope effects on sediment trapping process in vegetative filter strips (VFS) are usually neglected in current modelling practices for VFS operation, which hamper the VFS design and performance evaluation, especially on steep slopes. To fill the knowledge gap, 12 laboratory experiments of sediment trapping in VFS were conducted with three different inflow discharge (80, 100, and 120 ml s−1) and four slope angles (5,10, 15, and 20°). The experimental results show that, on steep slopes (10, 15, and 20°), a part of trapped sediment particles in VFS can be eroded again and then dragged to the downstream as bed load, whilst they do not move on gentle slope (5°). To describe the complex processes, a simple and effective modelling framework was developed for sloped VFS by coupling the slope infiltration, runoff, and modified sediment transport model. The model was tested against the experimental results and good agreements between the modelled and observed results were found in both runoff and sediment transport processes for all cases. On steep slopes, the sediment trapping performance of VFS decreases significantly because the erosion of deposited sediment particles can account for more than 60% of the sediment load in the outflow. The slope effect on sediment trapping efficiency of VFS varies greatly with soil, VFS, and slope properties. The model was compared with previous sediment transport equation and found that both methods can satisfactorily predict the sediment trapping of VFS on gentle slopes, but previous sediment transport equation is likely to overestimate the sediment trapping efficiency in VFS on steep slopes. This model is expected to provide a more realistic and accurate method for predicting runoff and sediment reduction in VFS on sloping surfaces.  相似文献   

17.
In December 2008, 694 trees uprooted within a 108 ha (1·08 km2) watershed in central Massachusetts due to a severe ice storm, resulting in the displacement of ~1300 m3 of root material, unconsolidated sediment, and fractured bedrock. Overall, we find that uprooting and tree throw is often grouped in clusters and cascades; conifers displace more material than deciduous trees; areas with abundant mature hemlock and steep slopes are more susceptible to tree throw, with clusters as dense as 125 per hectare; and failure is predominantly downhill, suggesting that ice storms promote efficient downslope hillslope sediment transport in northern hardwood forests. Combining the recurrence interval of severe storms in New England (20–75 years) with the forest response presented here, we calculate a sediment transport rate of 2–5 × 10?5 m3 m?1 a?1 averaged over the entire watershed. Forest susceptibility to tree throw differed based on location in the watershed; some areas experienced up to ~30× higher than average sediment transport rates, while others experienced no tree throw. Two severe storms following the 2008 ice storm (hurricane in 2011; snow storm in October 2012) did not result in significant tree throw within the study area, highlighting that the coupling of storm severity and forest susceptibility controls the amount of tree throw during a given forest disturbance. In addition to recent tree throw from the 2008 ice storm, widespread pit and mound microtopography in the study area indicates that tree throw is a recurrent process in this landscape. Two factors emerge that will influence future ice storms related hillslope sediment transport in the steep forested hillslopes of New England: regional climate gradients and changing climate determine the size, intensity and recurrence of ice storms; forest management practices and health control the tree age and type. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

18.
Abstract

Using daily suspended sediment and water discharge data, we calculated the current mean annual runoff and Specific Suspended Sediment Yield (SSY) for 66 mountainous and piedmont catchments in Chile. These catchments are located from the extreme north of Chile to Southern Patagonia and cover an exceptionally wide range of climates, slopes, and vegetation. The SSY ranges mainly between 0 and 700 t km-2 year-1 with some exceptions as high as 1780 t km-2 year-1. The SSY increases between the extreme north and 33°S and then decreases toward the south. Sediment and water discharge north of 33°S occur mainly during summer. Farther south the contribution of winter precipitation increases and predominates. When the SSY database is correlated with topographic, climatic and vegetation indices, it is found to correlate significantly with runoff and mean slope only. In order to concentrate on erosion processes in the mountain range, 32 mountainous catchments were selected along a strong north–south SSY gradient between 27°S and 40°S. From north to south, SSY increases strongly with runoff and then decreases, even while runoff keeps increasing. In catchments where SSY is low, although runoff is high, the mean slope is less than 40% and the vegetation cover is greater than 8%. For the other catchments, runoff variations explain 67% of the variance in sediment yields. Thus, SSY seems to be controlled by vegetation cover and slope thresholds. In addition, SSY also correlates with glacier cover. However, a correlation between SSY and seismicity, although possible, is ambiguous.

Citation Pepin, E., Carretier, S., Guyot, J. L. & Escobar, F. (2010) Specific suspended sediment yields of the Andean rivers of Chile and their relationship to climate, slope and vegetation. Hydrol. Sci. J. 55(7), 1190–1205.  相似文献   

19.
Two landsliding episodes between late 1973 and early 1975 delivered about 60000 m3 of sediment to six small deeply incised streams draining a 2·7 km2 area. About 4700 m3 of logs in the landslide debris formed major log jams in five streams, which impounded large volumes of landslide-derived sediment. Five years after the landsliding, 42 per cent (25000 m3) of sediment was still in storage behind 35 log jams ranging from 1·4–8·2 m high. The landsliding episodes have produced multi-stepped stream profiles, aggradation of channel reaches up to 150 m long to mean depths between 1·2 and 4·1 m, reductions in gradient, fining of bed material size, and related changes in bedforms and channel width:depth ratios that seem likely to persist for at least several decades. Sediment presently stored behind log jams is equivalent to between 50 and 220 years normal supply of sediment from hillslopes to stream channels. Long-delayed, large magnitude impacts on higher-order channels may occur if sudden failure of log jams is induced by a large storm at some future date.  相似文献   

20.
Kick 'em Jenny volcano is the only known active submarine volcano in the Lesser Antilles. It lies within a horseshoe-shaped structure open to the west northwest, toward the deep Grenada Basin. A detailed bathymetric survey of the basin slope at Kick 'em Jenny and resulting high-resolution digital elevation model allowed the identification of a major submarine landslide deposit. This deposit is thought to result from a single sector collapse event at Kick 'em Jenny and to be linked to the formation of the horseshoe-shaped structure. We estimated the volume and the leading-edge runout of the landslide to be ca. 4.4 km3 and 14 km, respectively. We modelled a sector collapse event of a proto Kick 'em Jenny volcano using VolcFlow, a finite difference code based on depth-integrated mass and momentum equations. Our models show that the landslide can be simulated by either a Coulomb-type rheology with low basal friction angles (5.5°–6.5°) and a significant internal friction angle (above 17.5°) or, with better results, by a Bingham rheology with low Bingham kinematic viscosity (0 < ν B < 30 m2/s) and high shear strength (130 < γ ≤ 180 m2/s2). The models and the short runout distance suggest that the landslide travelled as a stiff cohesive flow affected by minimal granular disaggregation and slumping on a non-lubricated surface. The main submarine landslide deposit can therefore be considered as a submarine mass slide deposit that behaved like a slump.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号