共查询到18条相似文献，搜索用时 171 毫秒
1.
医学图像配准综述 总被引：1，自引：0，他引：1
医学领域,医生需要比较不同的解剖影像信息和功能影像信息。将对应于同一物体的不同影像的像素点对应起来就是医学图像配准的主要任务。鉴于需要配准的图像的采集的方法和时间等方面不同,配准所采用的方法也不同。本文介绍了医学图像配准的新近方法。首先从图像配准的任务出发,介绍了配准过程的主要涉及的方面和配准流程。然后从配准时变换的参数角度考虑,将图像的配准分成两大类考虑:参数配准和非参数配准。每一类中给出基本的配准方法,并讨论其用法和特点。对参数配准,主要讨论它们各自不同的方法和适合处理的图像对;对非参数配准,侧重于考虑控制方程的由来和整体外力的计算。 相似文献
2.
图像配准和融合及其在医学影像中的应用 总被引：2，自引：2，他引：2
图像配准和融合是图像分析和处理的基本问题，在医学影像、遥感、计算机视觉等领域有着广泛的应用。本文研究它们在多模态医学影像技术中的应用。本文提出并实现了基于Ｆｏｕｒｉｅｒ变换的图像配准和基于子波变换的图像融合方法，在图像融合中，我们采用特征选择的取大原则，这种准则更适合于来自不同图像中的明显特征 相似文献
3.
带变形涡轮叶片精确配准算法研究 总被引：1，自引：1，他引：0
为满足航空发动机精铸涡轮叶片壁厚偏差分析需要,提出了一种基于变形函数的精铸涡轮叶片检测模型非刚体配准算法。首先,进行测量数据与CAD数据全局配准并对测量数据整体空间变换;然后,通过对变换后的测量数据与CAD模型的切片化处理及切片数据配准运算,分析叶片弯扭变形规律,实现测量数据的变形校正,达到测量数据与CAD模型的无变形配准,从而提高配准精度,为后续分析提供高精度数据。 相似文献
4.
5.
Demons算法在四维CT图像配准中的应用 总被引：1，自引：0，他引：1
由呼吸运动引起的器官的运动及形变是4D精确放射治疗中最主要的误差来源。利用4D CT图像和配准技术来分析不同呼吸时相中组织、器官的形变是目前研究的热点。目前常用的研究方法是基于形变模型的3D配准算法。基于光流场的Demons算法具有速度快和精度高的特点,本文将其应用到4D CT图像配准中,并在原始图像形变力的计算中引入了对称梯度。实验结果表明,结合对称梯度的Demons方法具有更快的收敛速度,而且匹配误差小。 相似文献
6.
基于SIFT特征的SAR图像配准方法在玉树地震中的应用 总被引：1，自引：0，他引：1
本文针对SAR图像特点, 提出了基于改进SIFT(尺度不变特征变换)算法的SAR图像配准方案: ① 对待配准图像进行ISEF(无限对称指数滤波器)滤波处理, 降低图像的斑点噪声; ② 采用SIFT算法提取特征点, 略过差分金字塔第一层的特征点检测, 提高时间效率; ③ 在欧氏空间内剔除误匹配点, 提高配准精度。 实验表明, 本文提出的SAR图像配准方案检测到的匹配点对的数量和稳健性都有提高, 精度能够满足亚像元级SAR图像的应用需求, 且用时比传统SIFT方法减少60%以上。 最后对精配准的SAR图像进行震害变化检测, 得到的震害分布与高分辨率光学图像上判读的建筑物毁坏情况基本一致。 相似文献
7.
自适应遗传算法配准三维数字样品模型及其CAD模型 总被引：2，自引：0，他引：2
通过包围盒的初始匹配和浮点数编码自适应遗传算法的精确匹配,实现了三维数字样品模型及其CAD模型的配准。初始匹配决定精确匹配空间变换参数的范围;精确匹配在搜索变换矩阵的6个变换参数过程中,采用最小二乘方法构造目标函数;遗传算法中引入种群多样性指标;在遗传操作的交叉算子和变异算子中引入该指标,并将该指标用于交叉概率和变异概率两个参数的调整,有效地克服了遗传算法的早收敛问题。实验结果表明该方法较好地解决了三维数字样品模型及其CAD模型的配准问题,且算法稳定,易于实现。 相似文献
8.
在X射线断层扫描(X-ray CT)成像过程中,经常会出现射线源、样品和探测器三者之间的相对移动,导致采集的投影图像(Projection image)以及亮场图像(flat field image)的空间位置配准关系出现偏差。这直接影响了投影图像背景的正常扣除,以及后续的CT图像重建。本文利用互相关方法,求出各投影图像背景与探测器原始采集位置之间的不一致量。然后将投影图像和亮场图像作相应变换,最后扣除背景得到校准后的图像。由于该方法对图像灰度较为敏感,所以在对实际样品校准之前,本文先对该样品投影图像及亮场图像进行了照度归一化。实验结果表明,该方法能够有效校正由射线源、样品和探测器之间相对移动造成的CT投影图像背景不一致,获得较好的CT投影图像和重建切片。 相似文献
9.
目的:探讨非刚性配准前后多期动态对比增强磁共振成像（DCE-MRI）扫描定量分析孤立性肺结节的可重复性研究。方法:使用1.5T磁共振对27例孤立性肺结节患者行DCE-MRI扫描。应用Omnikinetics软件对DCE-MRI图像进行非刚性校准。两位放射科医师测量校准前后DCE-MRI定量参数:容量转移常数（ktrans）、速率常数（kep）、血管外细胞间隙容积比（ve）各两次，两次测量间隔两周。采用组内相关系数（ICC）及Bland-Altman法分析测量者内部和测量者间一致性以及可重复性。结果:同一测量者进行两次测量，配准前ktrans、kep和ve的ICC分别为0.962、0.736和0.708，配准后，ICC分别为0.983、0.962和0.834。配准后较配准前均有所提高。配准前ktrans、kep和ve测量值的可重复性分别为4.8%、33.5%和9.6%，配准后分别为1.6%、13.9%和4.3%。配准后可重复性较配准前好。不同测量者之间，配准前ktrans、kep和ve的ICC分别为0.945、0.760和0.931，配准后，ICC分别为0.988、0.962和0.976。配准后ktrans、kep和ve测量值的可重复性分别为1.8%、13.7%和13.1%较配准前的可重复性分别为3.9%，35.7%和20.1%好。结论:非刚性配准技术可以提高测量孤立性肺结节DCE-MRI定量参数结果的可重复性。 相似文献
10.
正电子断层扫描仪与PET图像重建概述 总被引：2，自引：0，他引：2
概述了PET（Positron emission tomography，正电子断层扫描仪）及其图像重建的基本原理、方法与临床使用，介绍了常用的图像重建FBP（滤波反投影，Filtered Back-Projection)算法和OSEM（有序子集最大似然法，Ordered Subset Expectation Maximization)算法，描述了如何通过PET的临床协议中的参数选择以得到满意的重建效果。此外，对PET的准三维重建也做了一些简介。 相似文献
11.
A three-dimensional rigid body on the shape of a parallelepiped is modelled in order to rock on a side or a vertex of the base,in order to evaluate the seismic response of rigid blocks lying on a horizontal support.The center of mass of the body is considered as eccentric with respect to its geometric center.As seismic input,three Italian recorded accelerograms,with different spectral content,are used.The study is mainly conducted to highlight the differences between the seismic response of 2D and 3D models of rigid blocks,with the aim to understand if,in some cases,the use of the 3D model of rigid block is required to obtain safer results.In fact,the outcomes show that in some ranges of the geometrical and mechanical parameters that characterize the excitation and the body,a two-dimensional model,which is not able to consider the 3D rocking on a vertex,can provide unsafe results.In particular,it is found that the overturning process of the three-dimensional block can occur under excitations which are lower than those which overturn a corresponding two-dimensional block. 相似文献
12.
In this study, 3-D Lattice Solid Model (LSMearth or LSM) was extended by introducing particle-scale rotation. In the new model,
for each 3-D particle, we introduce six degrees of freedom: Three for translational motion, and three for orientation. Six
kinds of relative motions are permitted between two neighboring particles, and six interactions are transferred, i.e., radial,
two shearing forces, twisting and two bending torques. By using quaternion algebra, relative rotation between two particles
is decomposed into two sequence-independent rotations such that all interactions due to the relative motions between interactive
rigid bodies can be uniquely decided. After incorporating this mechanism and introducing bond breaking under torsion and bending
into the LSM, several tests on 2-D and 3-D rock failure under uni-axial compression are carried out. Compared with the simulations
without the single particle rotational mechanism, the new simulation results match more closely experimental results of rock
fracture and hence, are encouraging. Since more parameters are introduced, an approach for choosing the new parameters is
presented. 相似文献
13.
Yuji Ishiyama 《地震工程与结构动力学》1982,10(5):635-650
This investigation deals with motions of rigid bodies on a rigid floor subjected to earthquake excitations, and criteria for overturning of the bodies. In order to study any motions of a body in a plane, the motions are classified into six types, i.e. (1) rest, (2) slide, (3) rotation, (4) slide rotation, (5) translation jump and (6) rotation jump. Then, the following are studied: the equations of motion, transitions of motion, and motions after impact between the body and the floor. One of the features of this investigation is the introduction of the tangent restitution coefficient which enables us to estimate the magnitude of the tangent impulse at the instant of impact. A computer program was developed to simulate the motions of bodies subjected to horizontal and vertical ground motions, numerically solving the non-linear equations of motion. Several types of simulation were carried out and the following conclusions were found. The coefficient of friction must be greater than the breadth—height-ratio in order for the body to rock. The motions after impact from translation jump are greatly influenced by the normal and tangent restitution coefficients. As criteria for overturning of bodies, at least two factors must be taken into account: the horizontal acceleration and the velocity of the floor. Then it is possible to estimate the motions of the floor from the overturning of bodies in a more reliable manner than before. 相似文献
14.
Shaking table tests were conducted to investigate the response of rectangular wooden blocks and block assemblies of various sizes and slenderness to harmonic and earthquake base excitation. The shaking tests were followed by an analytical and a numerical study of response of single blocks and block assemblies. The analytical study was aimed at establishing criteria for the initiation of rocking and of overturning in response to harmonic base motion and consisted of solving numerically the differential equations of motion of a rigid block on a rigid foundation. The numerical study, in the course of which the response of both single blocks and block assemblies was examined, was implemented by means of the Distinct Element Method (DEM). Prior to the DE simulation of actual shaking tests, preliminary analyses were conducted to confirm numerical stability and to evaluate material and damping parameters. Comparing the recorded time histories with those given by the analytical study and the DE simulation, good agreement was found. The distinct element model in use appeared to follow the highly non-linear motion of rigid body assemblies faithfully to reality. On the basis of the results, provided that the necessary parameters are carefully estimated, the employed DE model can be regarded as an appropriate tool to simulate response of rigid body assemblies to dynamic base excitation. 相似文献
15.
Rates of river channel migration or widening are only valid if it can be demonstrated that the amount of change in the measured parameters exceeds the measurement errors. However, it is still uncommon to see estimates of errors presented alongside rates of river channel change measured from aerial photography. Here, detailed methods are presented for the estimation of errors in quantifying channel migration rates that can be easily applied to GIS‐based analysis of planform change. In addition, the impact of relaxing assumptions regarding error independence between image dates and systematic registration errors is presented and discussed. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
16.
地震走时层析成像是反演地层各向异性参数分布的有效方法,但是关于地震各向异性介质走时层析成像的研究并不多,其技术远远没有达到成熟的阶段.在野外数据采集时,地表反射波观测方式相对井间和垂直地震剖面观测方式的成本更低,利用qP反射波走时反演各向异性参数具有更加广泛的实用价值.本文实现的TI介质地震走时层析成像方法结合了TI介质反射波射线追踪算法、走时扰动方程和非线性共轭梯度算法,它可以对任意强度的TI介质模型进行反演,文中尝试利用qP反射波走时重建TI介质模型的参数图像.利用qP反射波对层状介质模型和块状异常体模型进行走时反演,由于qP波相速度对弹性模量参数和Thomsen参数的偏微分不同,所以可以分别反演弹性模量参数和Thomsen参数.数值模拟结果表明:利用qP反射波可以反演出TI介质模型的弹性模量参数与Thomsen参数,不同模型的走时迭代反演达到了较好的收敛效果,与各向同性介质走时反演结果相比较,各向异性介质走时反演结果具有较好的识别能力. 相似文献
17.
Franck Bourrier Frédéric Berger Pascal Tardif Luuk Dorren Oldrich Hungr 《地球表面变化过程与地形》2012,37(6):656-665
The accuracy of rockfall trajectory simulations mainly rests on the calculation of the rebound of fragments following their impact on the slope. This paper is dedicated to the comparative analysis of two rebound modelling approaches currently used in rockfall simulation using field experiments of single rebounds. The two approaches consist in either modelling the rock as a single material point (lumped mass approach) or in explicitly accounting for the fragment shape (rigid body approach). A lumped mass model accounting for the coupling between translational and rotational velocities and introducing a slope perturbation angle was used. A rigid body approach modelling the rocks as rigid locally deformable (in the vicinity of the contact surface) assemblies of spheres was chosen. The comparative analysis of the rebound models shows that both of them are efficient with only a few parameters. The main limitation of each approach are the calibration of the value of the slope perturbation (‘roughness’) angle, for the lumped mass approach, and the estimation of the rock length and height from field geological and historical analyses, for the rigid body approach. Finally, both rebound models require being improved in a pragmatic manner to better predict the rotational velocities distribution. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
18.
在乳腺专用CT(DBCT)系统中,图像质量和人体所受辐射剂量是倍受关注的两个重要因素。本文采用蒙特卡罗模拟方法研究球管电压和滤片对图像质量和剂量的影响,并引入与图像分辨率、噪声、辐射剂量相关的剂量效率η,综合评估辐射剂量和图像质量的关系。研究结果表明:选择合理的管电压值能够获得较好的剂量效率,并且通过优化滤片的形状可以在保证图像质量的同时降低人体所受剂量,为乳腺专用CT的临床应用提供重要参考。 相似文献