首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 13 毫秒
1.
塔中志留系下沥青砂岩段发育海侵背景下受风暴控制的滨岸-陆棚沉积体系,沉积砂体的类型有滨岸砂、浅海砂坝和陆棚砂。风暴作用改造并控制着陆棚砂、浅海砂坝等砂体,使其发育规模增大。海侵时期形成的上述三种砂体的储集性优于海退时期形成的潮道砂体。滨岸砂、浅海砂坝和陆棚砂体区域上尖灭与陆棚泥岩组合,可形成较好的岩性地层圈闭。  相似文献   

2.
The dominance of isotropic hummocky cross‐stratification, recording deposition solely by oscillatory flows, in many ancient storm‐dominated shoreface–shelf successions is enigmatic. Based on conventional sedimentological investigations, this study shows that storm deposits in three different and stratigraphically separated siliciclastic sediment wedges within the Lower Cretaceous succession in Svalbard record various depositional processes and principally contrasting sequence stratigraphic architectures. The lower wedge is characterized by low, but comparatively steeper, depositional dips than the middle and upper wedges, and records a change from storm‐dominated offshore transition – lower shoreface to storm‐dominated prodelta – distal delta front deposits. The occurrence of anisotropic hummocky cross‐stratification sandstone beds, scour‐and‐fill features of possible hyperpycnal‐flow origin, and wave‐modified turbidites within this part of the wedge suggests that the proximity to a fluvio‐deltaic system influenced the observed storm‐bed variability. The mudstone‐dominated part of the lower wedge records offshore shelf deposition below storm‐wave base. In the middle wedge, scours, gutter casts and anisotropic hummocky cross‐stratified storm beds occur in inferred distal settings in association with bathymetric steps situated across the platform break of retrogradationally stacked parasequences. These steps gave rise to localized, steeper‐gradient depositional dips which promoted the generation of basinward‐directed flows that occasionally scoured into the underlying seafloor. Storm‐wave and tidal current interaction promoted the development and migration of large‐scale, compound bedforms and smaller‐scale hummocky bedforms preserved as anisotropic hummocky cross‐stratification. The upper wedge consists of thick, seaward‐stepping successions of isotropic hummocky cross‐stratification‐bearing sandstone beds attributed to progradation across a shallow, gently dipping ramp‐type shelf. The associated distal facies are characterized by abundant lenticular, wave ripple cross‐laminated sandstone, suggesting that the basin floor was predominantly positioned above, but near, storm‐wave base. Consequently, shelf morphology and physiography, and the nature of the feeder system (for example, proximity to deltaic systems) are inferred to exert some control on storm‐bed variability and the resulting stratigraphic architecture.  相似文献   

3.
《Sedimentology》2018,65(5):1631-1666
Detailed logging and analysis of the facies architecture of the upper Tithonian to middle Berriasian Aguilar del Alfambra Formation (Galve sub‐basin, north‐east Spain) have made it possible to characterize a wide variety of clastic, mixed clastic–carbonate and carbonate facies, which were deposited in coastal mudflats to shallow subtidal areas of an open‐coast tidal flat. The sedimentary model proposed improves what is known about mixed coastal systems, both concerning facies and sedimentary processes. This sedimentary system was located in an embayed, non‐protected area of a wide C‐shaped coast that was seasonally dominated by wave storms. Clastic and mixed clastic–carbonate muds accumulated in poorly drained to well‐drained, marine‐influenced coastal mudflat areas, with local fluvial sandstones (tide‐influenced fluvial channels and sheet‐flood deposits) and conglomerate tsunami deposits. Carbonate‐dominated tidal flat areas were the loci of deposition of fenestral‐laminated carbonate muds and grainy (peloidal) sediments with hummocky cross‐stratification. Laterally, the tidal flat was clastic‐dominated and characterized by heterolithic sediments with hummocky cross‐stratification and local tidal sandy bars. Peloidal and heterolithic sediments with hummocky cross‐stratification are the key facies for interpreting the wave (storm) dominance in the tidal flat. Subsidence and high rates of sedimentation controlled the rapid burial of the storm features and thus preserved them from reworking by fair‐weather waves and tides.  相似文献   

4.
ERNESTO SCHWARZ 《Sedimentology》2012,59(5):1478-1508
The interpretation of sharp‐based shallow‐marine sandstone bodies encased in offshore mudstones, particularly transgressive units, has been a subject of recent debate. This contribution provides a multiple‐dataset approach and new identification criteria which could help in the recognition of transgressive offshore sandstone bodies worldwide. This study integrates sedimentology, ichnology, taphonomy and palaeoecology of Mulichinco Formation strata in the central Neuquén Basin (Argentina) in order to describe and interpret sharp‐based sandstone bodies developed in ramp‐type marine settings. These bodies are sandwiched between finer‐grained siliciclastics beneath and thin carbonates above. The underlying sediments comprise progradational successions from offshore mudstones to offshore transition muddy sandstones, grading occasionally into lower shoreface sandstones. The surfaces capping the regressive siliciclastics are flat and regionally extensive, and are demarcated by skeletal concentrations and a Glossifungites suite; they are also marked by sandstone rip‐up clasts, with encrustations and borings on all sides. These surfaces are interpreted as composite discontinuities, cut during a relative sea‐level fall and remodelled during the initial transgression. The overlying transgressive sandstone bodies are 3 to 7 m thick, >4 km long and about three times longer than wide; they are composed of fine‐grained sandstones with little lateral change in grain size. Cross‐stratification and/or cross‐lamination are common, typically with smaller‐scale structures and finer grain size towards the top. Large‐scale, low‐angle (5° to 8°) inclined stratification is also common, dipping at ca 30° with respect to body elongation and dominant currents. These sandstone bodies are interpreted as offshore sand ridges, probably developed under the influence of tidal currents. Intense burrowing is typical at the top of each unit, suggesting an abandonment stage. Final deactivation favoured colonization by epibenthic‐dominated communities and the formation of skeletal‐rich limestones during the latest transgressive conditions. As partial reworking of pre‐existing ridges occurred during this stage, the Mulichinco sandstone bodies are considered the remnants of transgressive offshore sand units.  相似文献   

5.
ABSTRACT Quaternary carbonates in SE Sicily were deposited in seamount and short ramp settings during glacio‐eustatically driven highstand conditions. They provide an excellent opportunity to investigate the depositional and erosional aspects of cool‐water carbonate sedimentation in a microtidal marine water body. The derived ramp facies model differs significantly from modern‐day, open‐ocean ramp scenarios in projected facies depth ranges and in the preservation of inshore facies. A sequence stratigraphic study of the carbonates has confirmed many established aspects of carbonate sedimentation (e.g. production usually only occurred during highstands). It has also revealed several new features peculiar to water bodies with little tidal influence, including ‘catch‐up’ surfaces taking the place of transgressive facies, second‐order sequence boundary events being most important as triggers for initiating resedimentation and a virtual absence of sediment shedding to the basin during the terminal lowstand. Production in the carbonate factory lasted for about 0·5 Myr. Despite this, carbonate production was considerable and included both bioconstructional and bioclastic‐dominated facies and the production of abundant lime muds. A model for eustatically controlled cool‐water carbonate production and resedimentation in microtidal marine water bodies is presented. This is considered to be more applicable to Neogene and Quaternary strata in the Mediterranean region than are current open‐ocean models.  相似文献   

6.
Shallow marine deposits comprising the Silurian Gray Sandstone Formation (GSF) exhibit pronounced process regime changes through time. The formation was deposited on the southern shelf of the Lower Palaeozoic Welsh Basin (UK), and conformably overlies the Coralliferous Formation. The basal Lithofacies Assemblage A (of Sheinwoodian age) is dominated by a storm‐dominated process regime, comprising shoreface and offshore shelf facies associations. The overlying Lithofacies Assemblage B records a mixed process regime, with units being deposited under both storm‐ and tide‐influenced conditions. Tidal‐influence prevailed during deposition of the overlying Lithofacies Assemblage C, with proximal to distal facies variations across a significant tide‐influenced river delta being observed. A return to storm‐dominated shoreface conditions is seen in the succeeding Lithofacies Assemblage D. Lithofacies Assemblage E (Homerian age) records the return of a tide‐influenced river delta to the area, prior to the conformable transition into the overlying Old Red Sandstone (ORS) Red Cliff Formation (of Ludlow age). Northward thickening of the formation across southern Pembrokeshire into the Musselwick Fault indicates a tectonic control on sedimentation, the formation infilling accommodation space developed in an intra‐shelf half‐graben. Recurring changes in process regime from storm‐ to tide‐influenced sedimentation may be related to the onset and subsequent cessation of tidal resonance in sub‐basins across the shelf area which itself was probably controlled by episodic tectonism. It is proposed that the Coralliferous and Gray Sandstone formations comprise the newly erected Marloes Group. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

7.
Deltas are commonly classified according to their plan‐view morphology as either river‐dominated, tide‐dominated or wave‐dominated. However, most deltas form under the mixed influence of these processes, commonly with laterally varying process regimes. It has also become clear that there is a mismatch between the plan‐view morphology and internal facies composition in some deltas. Combined outcrop and subsurface data from the Eocene Battfjellet Formation, Spitsbergen, provide an example of ancient shelf deltas that formed under mixed influence. Internally, these shelf deltas are characterized by wave‐dominated facies that are normally associated with strike‐extensive, nearly linear shoreline sandstones. However, the formation comprises partially overlapping sandstone bodies of limited lateral extent (<20 km in any direction). This stacking pattern is attributed to frequent autogenic lobe switching that caused localized and rapid transgressions. Such processes typify fluvial‐dominated deltas and occur less commonly in wave‐dominated ones. Thus, there is an apparent mismatch between inferred plan‐view morphology and internal facies composition. It is argued that the Battfjellet deltas were flood‐dominated and prograded mainly during periods of high fluvial discharge. However, reworking of the fluvial‐flood facies by fair‐weather and storm waves, as well as longshore currents, resulted in a wave‐dominated facies character. Delta lobes undergoing auto‐retreat were particularly prone to reworking by basinal processes, including tidal currents. It is suggested that repeated delta progradation from inner shelf settings towards the outer shelf and shelf edge was aided by high sediment supply rather than relative falls in sea‐level as previously suggested. This interpretation is supported by: (i) the lack of major facies dislocations and extensive sub‐aerial unconformities; and (ii) an overall relative rise in sea‐level as evidenced by an overall low‐angle (0·8 to 1·2°) ascending shoreline trajectory. The latter results from the combined effect of basin subsidence, eustatic highstand and sediment compaction.  相似文献   

8.
Shelf‐edge deltas are a key depositional environment for accreting sediment onto shelf‐margin clinoforms. The Moruga Formation, part of the palaeo‐Orinoco shelf‐margin sedimentary prism of south‐east Trinidad, provides new insight into the incremental growth of a Pliocene, storm wave‐dominated shelf margin. Relatively little is known about the mechanisms of sand bypass from the shelf‐break area of margins, and in particular from storm wave‐dominated margins which are generally characterized by drifting of sand along strike until meeting a canyon or channel. The studied St. Hilaire Siltstone and Trinity Hill Sandstone succession is 260 m thick and demonstrates a continuous transition from gullied (with turbidites) uppermost slope upward to storm wave‐dominated delta front on the outermost shelf. The basal upper‐slope deposits are dominantly mass‐transport deposited blocks, as well as associated turbidites and debrites with common soft‐sediment‐deformed strata. The overlying uppermost slope succession exhibits a spectacular set of gullies, which are separated by abundant slump‐scar unconformities (tops of rotational slides), then filled with debris‐flow conglomerates and sandy turbidite beds with interbedded mudstones. The top of the study succession, on the outer‐shelf area, contains repeated upward‐coarsening, sandstone‐rich parasequences (2 to 15 m thick) with abundant hummocky and swaley cross‐stratification, clear evidence of storm‐swell and storm wave‐dominated conditions. The observations suggest reconstruction of the unstable shelf margin as follows: (i) the aggradational storm wave‐dominated, shelf‐edge delta front became unstable and collapsed down the slope; (ii) the excavated scars of the shelf margin became gullied, but gradually healed (aggraded) by repeated infilling by debris flows and turbidites, and then new gullying and further infilling; and (iii) a renewed storm wave‐dominated delta‐front prograded out across the healed outer shelf, re‐establishing the newly stabilized shelf margin. The Moruga Formation study, along with only a few others in the literature, confirms the sediment bypass ability of storm wave‐dominated reaches of shelf edges, despite river‐dominated deltas being, by far, the most efficient shelf‐edge regime for sediment bypass at the shelf break.  相似文献   

9.
Dunes and bars are common elements in tide‐dominated shelf settings. However, there is no consensus on a unifying terminology or a systematic classification for thick sets of cross‐stratified sandstones. In addition, their ichnological attributes have hardly been explored. To address these issues, the properties, architecture and ichnology of compound cross‐stratified sandstone bodies contained in the Lower Cambrian Gog Group of the southern Canadian Rocky Mountains are described here. In these transgressive sandstones, five types of compound cross‐stratified sandstone are distinguished based on foreset geometry, sedimentary structures and internal heterogeneity. These represent four broad categories of subtidal sandbodies: (i) compound‐dune fields; (ii) sand sheets; (iii) sand ridges; and (iv) isolated dune patches; tidal bars comprise a fifth category but are not present in the Gog Group. Compound‐dune fields are characterized by sigmoidal and planar cross‐stratified sandstone in coarsening‐upward and thickening‐upward packages (Type 1); these are mostly unburrowed, or locally contain representatives of the Skolithos ichnofacies, but are intercalated with intensely bioturbated sandstone containing the archetypal Cruziana ichnofacies. Sand‐sheet complexes, also composed of compound dunes, cover more extensive subtidal areas, and comprise three adjacent subenvironments: core, front and margin. The core is characterized by thick‐bedded sets of cross‐stratified sandstone (Type 2). A decrease of bedform size at the front is recorded by wedges of thinner‐bedded, low‐angle and planar cross‐stratified sandstone (Type 3) exhibiting dense Skolithos pipe‐rock ichnofabric. The margin is characterized by interbedded sandstone and mudstone, and hummocky cross‐stratified sandstone. Sand‐sheet deposits exhibit clear trends in trace‐fossil distribution along the sediment transport path, from non‐bioturbated beds in the core to Skolithos ichnofacies at the front, and a depauperate Cruziana ichnofacies at the margin. Tidal sand ridges are large elongate sandbodies characterized by large sigmoid‐shaped reactivation surfaces (Type 4). Sand ridges display clear ichnological trends perpendicular to the axis of the ridge, with no bioturbation or a poorly developed Skolithos ichnofacies in the core, a depauperate Cruziana ichnofacies in lee‐side deposits, and Cruziana ichnofacies at the margin. While both tidal ridges and tidal bars migrate by means of lateral accretion, the latter occur in association with channels while the former do not. Because tidal bars tend to occur in brackish‐water marginal‐marine settings, their ichnofauna are typically of low diversity, representing a depauperate Cruziana ichnofacies. Isolated dune patches developed on sand‐starved areas of the shelf, and are represented by lenticular sandbodies with sigmoidal reactivation surfaces (Type 5); they typically lack trace fossils, but the interfingering muddy deposits are intensely bioturbated by a high‐diversity fauna recording the Cruziana ichnofacies. The variety of sandbody types in the Gog Group reflects varying sediment supply and location on the inner continental shelf. These, in turn, governed substrate mobility, grain size, turbidity, water‐column productivity and sediment organic matter which controlled trace fossil distribution.  相似文献   

10.
Bass Basin (66,000 km2) is unusual as a carbonate-dominated basin because calcitic carbonate muds are accumulating in relatively shallow (70–85 m) water depths in the central part of the basin (20,000 km2). The carbonate muds are produced by the primary accumulation and disintegration of nannoplankton, as well as through the biodegradation of skeletal carbonate grains accumulating on the sea floor. The muds are transported to the south of the basin to the end of tidal current transport paths, where they accumulate in the lowest-energy environment available in enclosed Bass Basin, although they are still subject to periodic reworking by storm energy. The basin margins consist of coarser, partially palimpsest, carbonate sands, whereas the central muds overlie a Late Pleistocene disequilibrium surface. In cores these muds are up to 1 m thick and thin away from the centre towards the margins. Bioturbation is important in modifying the textural character of the muds by increasing the grain size as faecal pellets, and therefore creating a sea floor not in equilibrium with modern hydrodynamic conditions. Radiocarbon dates for an early post-glacial marine transgression embayment facies in the basin gave ages of 10,290 ± 250 to 11,660 ± 300 years B.P. An age of 8700 ± 710 years B.P. was obtained for the base of the modern strait facies. These ages and facies thicknesses were used to establish Holocene sedimentation rates of < 12 cm/1000 y for the basin centre, falling to < 6 cm/1000 y towards the margins.  相似文献   

11.
Many modern deltas show complex morphologies and architectures related to the interplay of river, wave and tidal currents. However, methods for extracting the signature of the individual processes from the stratigraphic architecture are poorly developed. Through an analysis of facies, palaeocurrents and stratigraphic stacking patterns in the Jurassic Lajas Formation, this paper: (i) separates the signals of wave, tide and river currents; (ii) illustrates the result of strong tidal reworking in the distal reaches of deltaic systems; and (iii) discusses the implications of this reworking for the evolution of mixed‐energy systems and their reservoir heterogeneities. The Lajas Formation, a sand‐rich, shallow‐marine, mixed‐energy deltaic system in the Neuquén Basin of Argentina, previously defined as a tide‐dominated system, presents an exceptional example of process variability at different scales. Tidal signals are predominantly located in the delta front, the subaqueous platform and the distributary channel deposits. Tidal currents vigorously reworked the delta front during transgressions, producing intensely cross‐stratified, sheet‐like, sandstone units. In the subaqueous platform, described for the first time in an ancient outcrop example, the tidal reworking was confined within subtidal channels. The intensive tidal reworking in the distal reaches of the regressive delta front could not have been predicted from knowledge of the coeval proximal reaches of the regressive delta front. The wave signals occur mainly in the shelf or shoreface deposits. The fluvial signals increase in abundance proximally but are always mixed with the other processes. The Lajas system is an unusual clean‐water (i.e. very little mud is present in the system), sand‐rich deltaic system, very different from the majority of mud‐rich, modern tide‐influenced examples. The sand‐rich character is a combination of source proximity, syndepositional tectonic activity and strong tidal‐current reworking, which produced amalgamated sandstone bodies in the delta‐front area, and a final stratigraphic record very different from the simple coarsening‐upward trends of river‐dominated and wave‐dominated delta fronts.  相似文献   

12.
应用经典层序地层学方法,通过不整合面、钻测井等标志将厄瓜多尔Oriente盆地南部区块Napo组划分为5个三级层序;以地层叠置样式、岩性、岩相的变化细分出陆架边缘、海侵和高位体系域。陆架边缘体系域以潮汐水道沉积为特征;海侵体系域以广泛分布的陆棚相泥岩沉积为特征;高位体系域发育加积式陆棚相灰岩沉积。最后识别出潮汐水道砂体、水下浅滩和M1岩性尖灭带3种有利的岩性地层圈闭,综合预测Oriente盆地南部区块Napo组的潮汐水道砂体发育区是最有利的勘探方向。  相似文献   

13.
The Upper Cretaceous (Campanian) Kenilworth Member of the Blackhawk Formation (Mesaverde Group) is part of a series of strand plain sandstones that intertongue with and overstep the shelfal shales of the western interior basin of North America. Analysis of this section at a combination of small (sedimentological) and large (stratigraphical) scales reveals the dynamics of progradation of a shelf-slope sequence into a subsiding foreland basin. Four major lithofacies are present in the upper Mancos and Kenilworth beds of the Book Cliffs. A lag sandstone and channel-fill shale lithofacies constitutes the thin, basal, transgressive sequence, which rests on a marine erosion surface. It was deposited in an outer shelf environment. Shale, interbedded sandstone and shale, and amalgamated sandstone lithofacies were deposited over the transgressive lag sandstone lithofacies as a wave-dominated delta and its flanking strand plains prograded seaward. Analysis of grain size and primary structures in Kenilworth beds indicates that there are four basic strata types which combine to build the observed lithofacies. The fine- to very fine-grained graded strata of the interbedded facies are tempestites, deposited out of suspension by alongshelf storm flows (geostrophic flows). There is no need to call on cross-shelf turbidity currents (density underflows) to explain their presence. Very fine- to fine-grained hummocky strata are likewise suspension deposits created by waning storm flows, but were deposited under conditions of more intense wave agitation on the middle shoreface. Cross-strata sets in this region are bed-load deposits that accumulated on the upper shore-face, in the surf zone. Lag strata are multi-event, bed-load deposits that are the product of prolonged storm winnowing. They occur on transgressive surfaces. While the graded beds are tempestites in the strict sense, all four classes of strata are storm deposits. The distribution of strata types and their palaeocurrent orientations suggests a model of the Kenilworth transport system driven by downwelling coastal storm flows, and probably by a northeasterly alongshore pressure gradient. The stratification patterns shift systematically from upper shoreface to lower shoreface and inner shelf lithofacies partly because of a reduction in fluid power expenditure with increasing water depth, but also because of progressive sorting, which resulted in a decrease in grain size in the sediment load delivered to successive downstream environments. The Kenilworth Member and an isolated outlier, the Hatch Mesa lentil, constitute a delta-prodelta shelf depositional system. Their rhythmically bedded, lenticular, sandstone and shale successions are a prodelta shelf facies, and may be prodelta plume deposits. Major Upper Cretaceous sandstone tongues in the Book Cliffs are underlain by erosional surfaces like that beneath the Blackhawk Formation, which extend for many tens of kilometres into the Mancos shale. These surfaces are the boundaries of Upper Cretaceous depositional sequences. The sequences are large-scale genetic stratigraphic units. They result from the arranging of facies into depositional systems; the depositional systems are in turn stacked in repeating arrays, which constitute the depositional sequences. The anatomy of these foreland basin sequences differs  相似文献   

14.
《Sedimentology》2018,65(6):2149-2170
Hyperpycnal currents are river‐derived turbidity currents capable of transporting significant volumes of sediment from the shoreline onto the shelf and potentially further to deep ocean basins. However, their capacity to deposit sand bodies on the continental shelf is poorly understood. Shelf hyperpycnites remain an overlooked depositional element in source to sink systems, primarily due to their limited recognition in the rock record. Recent discoveries of modern shelf hyperpycnites, and previous work describing hyperpycnites deposited in slope or deep‐water settings, provide a valuable framework for understanding and recognizing shelf hyperpycnites in the rock record. This article describes well‐sorted lobate sand bodies on the continental shelf of the Neuquén Basin, Argentina, interpreted to have been deposited by hyperpycnal currents. These hyperpycnites of the Jurassic Lajas Formation are characterized by well‐sorted, medium‐grained, parallel‐laminated sandstones with hundreds of metre extensive, decimetre thick beds encased by organic‐rich, thinly laminated sandstone and siltstone. These deposits represent slightly obliquely‐migrating sand lobes fed by small rivers and deposited on the continental shelf. Hyperpycnites of the Lajas Formation highlight several unique characteristics of hyperpycnal deposits, including their distinctively thick horizontal laminae attributed to pulsing of the hyperpycnal currents, the extraction of coarse gravel due to low flow competence, and the extraction of mud due to lofting of light interstitial fluid. Recognition of shelf hyperpycnites in the Lajas Formation of the Neuquén Basin allows for a broader understanding of shelf processes and adds to the developing facies models of hyperpycnites. Recognizing and understanding the geometry and internal architecture of shelf hyperpycnites will improve current understanding of sediment transfer from rivers to deeper water, will improve palaeoenvironmental interpretations of sediment gravity‐flow deposits, and has implications for modelling potentially high‐quality hydrocarbon reservoirs.  相似文献   

15.
Willis  Bhattacharya  Gabel  & White 《Sedimentology》1999,46(4):667-688
The Frewens sandstone is composed of two elongate tide-influenced sandstone bodies that are positioned directly above and slightly landward of a more wave-influenced lobate sandstone. The 20-km-long, 3-km-wide Frewens sandstone bodies coarsen upwards and fine away from their axes, have gradational bases and margins and have eroded tops abruptly overlain by marine shales. These sandstones are superbly exposed in large cliffs on the banks of the South Fork of the Powder River in central Wyoming, USA. The deposits change upwards from thinly interbedded sandstones and mudstones to metre-thick heterolithic cross-strata and, finally, to metres-thick sandstone-dominated cross-strata. There is abundant evidence for tidal modulation of depositional flows; however, palaeocurrents were strongly ebb-dominated and nearly parallel the trend of sandstone-body elongation. Detailed mapping of stratal geometry and facies across these exposures shows a complex internal architecture. Large-scale bedding units within sandstone bodies are defined by alternations in facies, bed thickness and the abundance of shales. Such bedsets are inclined (5°–15°) in walls oriented parallel to palaeoflow and gradually decrease in dip over hundreds of metres as they extend from the sandstone-dominated deposits higher in a sandstone body to muddier deposits lower in the body. Where viewed perpendicular to palaeoflow, bedsets are 100-metre-wide lenses that shingle off the sandstone-body axis towards its margins. The sandstone bodies are interpreted as sand ridge deposits formed on the shoreface of a tide-influenced river delta. Metres-thick cross-strata in the upper parts of sandstone bodies resemble deposits of bars (sandwaves) formed where tidal currents moved across shallows and the tops of tidal ridges. Heterolithic deposits lower in sandstone bodies record fluctuating currents caused by ebb and flood tides and varying river discharge. Erosion surfaces capping sandstone bodies record tidal ravinement. The tidal ridges were abandoned following transgression and covered with marine mud as waters deepened.  相似文献   

16.
Tidal-shelf sedimentation: an example from the Scottish Dalradian   总被引：2，自引：0，他引：2  
The Jura Quartzite, a formation of probably late Precambrian metasediments over 5 km thick from the Caledonian belt in Southwest Scotland, has been divided into a coarse and three fine facies. The former comprises cross-bedded sands with some laminated sands and silt horizons, interpreted as the deposits of shallow marine tidal dunes and other bedforms together with some beach units. Deposition from suspension of silt and sand formed climbing dunes while largescale erosion produced flat or channelled surfaces. The fine facies comprise laterally persistent, parallel and cross-laminated sand units from millimetres to decimetres thick, interbedded with muds. The coarse and fine facies can be finely interbedded, the former sometimes filling decimetre deep, straight channels, cut in the latter. The fine facies exhibit structures indicative of deposition from decelerating currents and are interpreted as shallow marine storm deposits. The facies are compared with a model developed from published observations on modern shelf areas. Zones of erosion, large and small dunes, flat bedded sand and mud are considered to be the end product of a wide spectrum of tidal and storm conditions. During severe storms the fair weather tidal dunes may be modified or washed out, new dunes may be initiated downcurrent of the normal dune field while storm-sand layers are deposited in the distal zones. Hence, the nature of the preserved sediment blanket reflects the rare severe storm event rather than normal tidal conditions. The Jura Quartzite was deposited in a tidal gulf intimately connected with an ocean basin. The north-northeast directed palaeocurrent modes are probably roughly parallel to the coastline.  相似文献   

17.
Shelf‐edge deltas record the potential magnitude of sediment delivery from shallow water shelf into deep water slope and basin floor and, if un‐incised, represent the main increment of shelf‐margin growth into the basin, for that period. The three‐dimensional complexity of shelf‐edge delta systems and along‐strike variability at the shelf edge in particular, remains understudied. The Permian–Triassic Kookfontein Formation of the Tanqua Karoo Basin, South Africa, offers extensive three‐dimensional exposure (>100 km2) and therefore a unique opportunity to evaluate shelf‐edge strata from an outcrop perspective. Analysis of stratal geometry and facies distribution from 52 measured and correlated stratigraphic sections show the following: (i) In outer‐shelf areas, parasequences are characterized by undeformed, river‐dominated, storm‐wave influenced delta mouth‐bar sandstones interbedded with packages showing evidence of syn‐depositional deformation. The amount and intensity of soft‐sediment deformation increases significantly towards the shelf edge where slump units and debris flows sourced from collapsed mouth‐bar packages transport material down slope. (ii) On the upper slope, mouth‐bar and delta‐front sandstones pinch out within 2 km of the shelf break and most slump and debris flow units pinch out within 4 km of the shelf break. (iii) Further down the slope, parasequences consist of finer‐grained turbidites, characterized by interbedded, thin tabular siltstones and sandstones. The results highlight that river‐dominated, shelf‐edge deltas transport large volumes of sand to the upper slope, even when major shelf‐edge incisions are absent. In this case, transport to the upper slope through slumping, debris flows and un‐channellized low density turbidites is distributed evenly along strike.  相似文献   

18.
Shelf‐edge deltas play a critical role in shelf‐margin accretion and deepwater sediment delivery, yet much remains to be understood about the detailed linkage between shelf edge and slope sedimentation. The shelf edge separates the flat‐lying shelf from steeper slope regions, and is observable in seismic data and continuous outcrops; however, it is commonly obscured in non‐continuous outcrops. Defining this zone is essential because it segregates areas dominated by shelf currents from those governed by gravity‐driven processes. Understanding this linkage is paramount for predicting and characterizing associated deepwater reservoirs. In the Tanqua Karoo Basin, the Permian Kookfontein Formation shelf‐slope clinothems are well‐exposed for 21 km along depositional strike and dip. Two independent methods identified the shelf‐edge position, indicating that it is defined by: (i) a transition from predominantly shelf‐current to gravitational deposits; (ii) an increase in soft‐sediment deformation; (iii) a significant gradient increase; and (iv) clinothem thickening. A quantitative approach was used to assess the impact of process‐regime variability along the shelf edge on downslope sedimentation. Facies proportions were quantified from sedimentary logs and photographic panels, and integrated with mapped key surfaces to construct a stratigraphic grid. Spatial variability in facies proportions highlights two types of shelf‐edge depositional zones within the same shelf‐edge delta. Where deposition occurred in fluvial‐dominated zones, the slope is sand rich, channelized with channels widening downslope, and rich in collapse features. Where deltaic deposits indicate considerable tidal reworking, the deposits are thin and pinch‐out close to the shelf edge, and the slope is sand poor and lacks channelization. Amplification of tidal energy, and decrease in fluvial drive on the shelf, coincides with a decrease in mouth bar and shelf‐edge collapse, and a lack of channelization on the slope. This analysis suggests that process‐regime variability along the shelf edge exercised significant control on shelf‐edge progradation, slope channelization and deepwater sediment delivery.  相似文献   

19.
Stratigraphic patterns and sequence development in tectonically active extensional basins remain poorly documented in comparison with passive‐margin settings. Rift basin fills are generally characterized by coarsening‐upward trends in response to the rapid creation of accommodation by extensional faulting, and the progressive filling of graben during more quiescent periods. The Early Permian Irwin River Coal Measures in the Northern Perth Basin (Western Australia) record a complex stratigraphic arrangement of conglomerate, sandstone, mudstone and coal, and have been attributed to delta plain depositional environments that developed in a cool–temperate climatic setting during syn‐rift activity. Sedimentary analysis of outcrop and core data from the fault‐bounded Irwin Terrace is used to distinguish nine facies associations reflecting deposition in braided rivers, fixed‐anastomosed channel belts, tide‐influenced coastal environments and storm‐affected distal bays. The broader depositional system is interpreted as a morphologically asymmetrical tide‐dominated embayment with a fluvial and wave influence. The stratigraphic architecture of the Irwin River Coal Measures was strongly influenced by the evolving rift basin margin. Fault reactivation of the major basin‐bounding Darling Fault in the early syn‐rift phase caused footwall uplift and the inception of transverse palaeo‐valleys occupied by braided fluvial systems. Fault block subsidence during the subsequent balanced, backstepping and drowning phases resulted in a dominantly retrogradational stacking pattern indicating progressive flooding of marginal‐marine areas and culminating in deposition of distal marine elements. In the active rift basin, it is proposed that preservation of a shallow‐marine syn‐rift sequence was promoted by the geomorphological confinement of the embayed system increasing tidal current acceleration and hampering transgressive ravinement. The proposed sequence model demonstrates that transgressive successions can develop in the early syn‐rift phase in response to footwall uplift and tectonic subsidence. The syn‐rift sequence recording the filling of an embayment on a rift basin margin may be applied in similar tectonic and/or depositional contexts worldwide.  相似文献   

20.
塔中地区志留系柯坪塔格组下沥青砂岩段是塔里木盆地古生界碎屑岩层系油气主要富集层段之一。以钻井岩心观察描述为基础,结合测井、地震和分析测试资料进行综合分析,提出了塔中地区志留系下沥青砂岩段发育海侵背景下的滨岸-潮坪-辫状河三角洲沉积体系的观点。其中滨岸相沉积中主要发育上临滨和下临滨沉积微相,岩性以细砂岩、粉砂岩、含砾不等粒砂岩为主;潮坪沉积相中障壁砂坝、潮砂滩、潮汐水道、砂坪沉积微相发育,潮道沉积的岩性以砂岩、粗砂岩和含砾砂岩为主,发育楔形、板状和羽状交错层理,底部见侵蚀冲刷面和较多黄铁矿团块;辫状河三角洲中发育辫状河水下分流河道、分流间湾、前缘席状砂等沉积微相。海侵时期,下沥青砂岩段存在4期超覆砂体,从盆地中部向南部的塔中低隆逐期超覆,沉积微相在平面上也由此存在着复合超覆规律的演变,整体表现为滨岸相至潮坪相、辫状河三角洲沉积相沉积的演变。4期超覆沉积微相的平面分布在控制因素、展布范围和海侵方向上具有一定的继承性、相似性和规律性。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号