首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Un‐fragmented stratigraphic records of late Quaternary multiple incised valley systems are rarely preserved in the subsurface of alluvial‐delta plains due to older valley reoccupation. The identification of a well‐preserved incised valley fill succession beneath the southern interfluve of the Last Glacial Maximum Arno palaeovalley (northern Italy) represents an exceptional opportunity to examine in detail evolutionary trends of a Mediterranean system over multiple glacial–interglacial cycles. Through sedimentological and quantitative meiofauna (benthic foraminifera and ostracods) analyses of two reference cores (80 m and 100 m long) and stratigraphic correlations, a mid‐Pleistocene palaeovalley, 5 km wide and 50 m deep, was reconstructed. Whereas valley filling is chronologically constrained to the penultimate interglacial (Marine Isotope Stage 7) by four electron spin resonance ages on bivalve shells (Cerastoderma glaucum), its incision is tentatively correlated with the Marine Isotope Stage 8 sea‐level fall. Above basal fluvial‐channel gravels, the incised valley fill is formed by a mud‐prone succession, up to 44 m thick, formed by a lower floodplain unit and an upper unit with brackish meiofauna that reflects the development of a wave‐dominated estuary. Subtle meiofauna changes towards less confined conditions record two marine flooding episodes, chronologically linked to the internal Marine Isotope Stage 7 climate‐eustatic variability. After the maximum transgressive phase, recorded by coastal sands, the interfluves were flooded around 200 ka (latest Marine Isotope Stage 7). The subsequent shift in river incision patterns, possibly driven by neotectonic activity, prevented valley reoccupation guiding the northward formation of the Last Glacial Maximum palaeovalley. The applied multivariate approach allowed the sedimentological characterization of the Marine Isotope Stage 7 and Marine Isotope Stage 1 palaeovalley fills, including shape, size and facies architecture, which revealed a consistent river‐coastal system response over two non‐consecutive glacial–interglacial cycles (Marine Isotope Stages 8 to 7 and Marine Isotope Stages 2 to 1). The recurring stacking pattern of facies documents a predominant control exerted on stratigraphy by Milankovitch and sub‐Milankovitch glacio‐eustatic oscillations across the late Quaternary period.  相似文献   

2.
The Late Pleistocene/Holocene Tiber delta succession represents the most recent and one of the best preserved, high‐frequency/low‐rank depositional sequences developed along the Latium continental margin of the Italian peninsula. Several previous studies have established a robust data set from which it has been possible to describe the stratigraphic architecture of the entire Tiber depositional sequence from the landward to seaward sectors and over a distance of 60 km. The Tiber depositional sequence shows many characteristics found in other Late Pleistocene to Holocene deltaic and coastal successions of the Mediterranean area. The stratigraphic architecture of the Tiber depositional sequence is controlled mainly by glacioeustasy, although factors such as tectonic uplift, volcanism and subsidence, exert an influence at a local scale. The resulting depositional model allowed discussion of some important points such as: (1) the genesis of the Tiber mixed bedrock‐alluvial valley, extending from the coastal plain to the innermost portion of the shelf, recording (i) multiple episodes of incision during relative sea‐level fall, and (ii) a downstream increase of depth and width of the valley during the base‐level fall and the subsequent base‐level rise; (2) the different physical expression of the Tiber depositional sequence boundary from landward to seaward, and its diachronous and composite character; (3) the maximum depth reached by the Tiber early lowstand delta at the end of the sea‐level fall is estimated at ca 90 m below the present sea‐level and not at 120 m as suggested by previous works; (4) the backward position of the Tiber late lowstand delta relative to the deposit of early lowstand; (5) the change of the channel pattern and of the stacking pattern of fluvial deposits within the Lowstand Systems Tract, Transgressive Systems Tract and Highstand Systems Tract. All of these features indicate that the Late Pleistocene/Holocene Tiber delta succession, even if deposited in a short period of time from a geological point of view, represents the result of the close interaction among many autogenic and allogenic factors. However, global eustatic variations and sediment supply under the control of climatic changes can be considered the main factors responsible for the stratigraphic architecture of this sedimentary succession, which has been heavily modified by human activity only in the last 3000 years.  相似文献   

3.
The Lower Tagus Valley in Portugal contains a well-developed valley-fill succession covering the complete Late Pleistocene and Holocene periods. As large-scale stratigraphic and chronologic frameworks of the Lower Tagus Valley are not yet available, this paper describes facies, facies distribution, and sedimentary architecture of the late Quaternary valley fill. Twenty four radiocarbon ages provide a detailed chronological framework. Local factors affected the nature and architecture of the incised valley-fill succession. The valley is confined by pre-Holocene deposits and is connected with a narrow continental shelf. This configuration facilitated deep incision, which prevented large-scale marine flooding and erosion. Consequently a thick lowstand systems tract has been preserved. The unusually thick lowstand systems tract was probably formed in a previously (30,000–20,000 cal BP) incised narrow valley, when relative sea-level fall was maximal. The lowstand deposits were preserved due to subsequent rapid early Holocene relative sea-level rise and transgression, when tidal and marine environments migrated inland (transgressive systems tract). A constant sea level in the middle to late Holocene, and continuous fluvial sediment supply, caused rapid bayhead delta progradation (highstand systems tract). This study shows that the late Quaternary evolution of the Lower Tagus Valley is determined by a narrow continental shelf and deep glacial incision, rapid post-glacial relative sea-level rise, a wave-protected setting, and large fluvial sediment supply.  相似文献   

4.
The passive margin Texas Gulf of Mexico Coastal Plain consists of coalescing late Pleistocene to Holocene alluvial–deltaic plains constructed by a series of medium to large fluvial systems. Alluvial–deltaic plains consist of the Pleistocene Beaumont Formation, and post-Beaumont coastal plain incised valleys. A variety of mapping, outcrop, core, and geochronological data from the extrabasinal Colorado River and the basin-fringe Trinity River show that Beaumont and post-Beaumont strata consist of a series of coastal plain incised valley fills that represent 100 kyr climatic and glacio-eustatic cycles.

Valley fills contain a complex alluvial architecture. Falling stage to lowstand systems tracts consist of multiple laterally amalgamated sandy channelbelts that reflect deposition within a valley that was incised below highstand alluvial plains, and extended across a subaerially-exposed shelf. The lower boundary to falling stage and lowstand units comprises a composite valley fill unconformity that is time-transgressive in both cross- and down-valley directions. Coastal plain incised valleys began to fill with transgression and highstand, and landward translation of the shoreline: paleosols that define the top of falling stage and lowstand channelbelts were progressively onlapped and buried by heterolithic sandy channelbelt, sandy and silty crevasse channel and splay, and muddy floodbasin strata. Transgressive to highstand facies-scale architecture reflects changes through time in dominant styles of avulsion, and follows a predictable succession through different stages of valley filling. Complete valley filling promoted avulsion and the large-scale relocation of valley axes before the next sea-level fall, such that successive 100 kyr valley fills show a distributary pattern.

Basic elements within coastal plain valleys can be correlated with the record offshore, where cross-shelf valleys have been described from seismic data. Falling stage to lowstand channelbelts within coastal plain valleys were feeder systems for shelf-phase and shelf-margin deltas, respectively, and demonstrate that falling stage fluvial deposits are important valley fill components. Signatures of both upstream climate change vs. downstream sea-level controls are therefore interpreted to be present within incised valley fills. Signatures of climate change consist of the downstream continuity of major stratigraphic units and component facies, which extends from the mixed bedrock–alluvial valley of the eroding continental interior to the distal reaches, wherever that may be at the time. This continuity suggests the development of stratigraphic units and facies is strongly coupled to upstream controls on sediment supply and climate conditions within hinterland source regions. Signatures of sea-level change are critical as well: sea-level fall below the elevation of highstand depositional shoreline breaks results in channel incision and extension across the newly emergent shelf, which in turn results in partitioning of the 100 kyr coastal plain valleys. Moreover, deposits and key surfaces can be traced from continental interiors to the coastal plain, but there are downstream changes in geometric relations that correspond to the transition between the mixed bedrock–alluvial valley and the coastal plain incised valley. Channel incision and extension during sea-level fall and lowstand, with channel shortening and delta backstepping during transgression, controls the architecture of coastal plain and cross-shelf incised valley fills.  相似文献   


5.
High resolution seismic lines from the inner and mid-shelf of the Durban Bight reveal an unprecedented view of the seismic stratigraphy of the central KwaZulu-Natal uppermost continental margin. Seven units are recognised from the shelf on the basis of their stratal architecture and bounding unconformities. These comprise four incompletely preserved sequences consisting of deposits of the highstand systems tract (Unit B), falling stage systems tracts (Unit C), the transgressive systems tract (Units A, D and G) and lowstand systems tracts (early fill of the incised valleys and strike diachronous prograding reflectors of Unit A). Seismic facies recognised as incised valley fills correspond to the lowstand and transgressive systems tracts. When integrated with published accounts of onshore and offshore lithostratigraphy and local sea level curves, we recognise an Early Santonian transgression (Unit A to Unit B), superimposed by uplift-induced pulses of forced regression. A Late Campanian relative sea level fall (Unit C) followed. Sediments of the Tertiary period are not evident on the Durban Bight shelf except for isolated incised valley fills of Unit D lying within incised valleys of Late Pliocene age. Overlying these are two stages of Pleistocene shoreline deposits of indeterminate age. Erosion concurrent with relative sea level fall towards the last glacial maximum shoreline carved a third set of incised valleys within which sediments of the Late Pleistocene/Holocene have infilled.  相似文献   

6.
This study from the southern margin of the Gulf of Corinth documents a Late Pleistocene incised valley‐fill succession that differs from the existing facies models, because it comprises gravelly shoal‐water and Gilbert‐type deltaic deposits, shows strong wave influence and lacks evidence of tidal activity. The valley‐fill is at least 140 m thick, formed in 50 to 100 ka between the interglacials Marine Isotope Stage 9a and Marine Isotope Stage 7c. The relative sea‐level rise left its record both inside and outside the incised valley, and the age of the valley‐fill is estimated from a U/Th date of coral‐bearing deposits directly outside the palaeovalley outlet. Tectonic up‐warping due to formation of a valley‐parallel structural relay ramp contributed to the valley segmentation and limited the landward extent of marine invasions. The valley segment upstream of the ramp crest was filled with a gravelly alluvium, whereas the downstream segment accumulated fluvio‐deltaic deposits. The consecutive deltaic systems nucleated in the ramp‐crest zone, forming a bathymetric gradient that promoted the ultimate growth of thick Gilbert‐type delta. The case study contributes to the spectrum of conceptual models for incised valley‐fill architecture. Four key models are discussed with reference to the rates of sediment supply and accommodation development, and it is pointed out that not only similarity, but also all departures of particular field cases from these end‐member models may provide valuable information on the system formative conditions. The Akrata incised valley‐fill represents conditions of high sediment supply and a rapid, but stepwise development of accommodation that resulted from the spatiotemporal evolution of normal faulting at the rift margin and overprinted glacioeustatic signals. This study adds to an understanding of valley‐fill architecture and provides new insights into the Pleistocene tectonics and palaeogeography of the Corinth Rift margin.  相似文献   

7.
Many pre‐Mesozoic records of Earth history are derived from shallow water carbonates deposited on continental shelves. While these carbonates contain geochemical proxy records of climate change, it is the stratal architecture of layered carbonate units that often is used to build age models based on the idea that periodic astronomical forcing of sea‐level controls the layering. Reliable age models are crucial to any interpretation of rates and durations of environmental change, but the physical processes that actually control this stratal architecture in shallow water carbonates are controversial. In particular, are upward‐shallowing stacks of carbonate beds bounded by flooding surfaces (‘parasequences’) truly a record of relative sea‐level change? The purpose of this study is to examine a tidal flat that is actively accumulating carbonate stratigraphy, and to determine the relative importance of tidal channel migration (poorly known, but investigated here) and Holocene sea‐level rise (well‐known) in controlling post‐glacial parasequence architecture. This work represents a field study of peritidal carbonate accumulation at Triple Goose Creek, north‐west Andros Island. By integrating surface facies maps with differential global positioning system topographic surveys, a quantitative relationship between facies and elevation is derived. Sedimentary facies are sensitive to elevation changes as small as 5 cm, and are responding to both internal (distance to nearest tidal channel) and external (sea‐level rise) controls. The surface maps also are integrated with 187 sediment cores that each span the entire Holocene succession. While flooding of the Triple Goose Creek area should have occurred by ca 4500 years ago, preservation of Holocene sediment did not begin until 1200 years ago. The tidal channels are shown to be stationary, or to migrate sluggishly at up to 6 cm per year. Therefore, while the location of tidal channels is responsible for the modern mosaic of surface facies, these facies and the channels that control them have not migrated substantially during the ca 1200 years of sediment accumulation at Triple Goose Creek. Once the region was channellized, vertical and lateral shifts in facies, such as the landward retreating shoreline, expanding mangrove ponds and seaward advancing inland algal marsh, are driven by changes in relative sea‐level and sediment supply, not migrating channels. While stratigraphic columns look different depending on the distance to the nearest tidal channel, the overall parasequence architecture everywhere at Triple Goose Creek records an upward‐shallowing trend controlled by the infilling of accommodation space generated by post‐glacial sea‐level rise.  相似文献   

8.
The evolution of incised valleys is an important area of research due to the invaluable data it provides on sea‐level variations and depositional environments. In this article the sedimentary evolution of the Ría de Ferrol (north‐west Spain) from the Last Glacial Maximum to the present is reconstructed using a multidisciplinary approach, combining seismic and sedimentary facies, and supported by radiocarbon data and geochemical proxies to distinguish the elements of sedimentary architecture within the ria infill. The main objectives are: (i) to analyse the ria environment as a type of incised valley to evaluate the response of the system to the different drivers; (ii) to investigate the major controlling factors; and (iii) to explore the differentiation between rias and estuaries. As a consequence of the sea‐level rise subsequent to the Last Glacial Maximum (ca 20 kyr bp ), an extensive basin, drained by a braided palaeoriver, evolved into a tide‐dominated estuary and finally into a ria environment. Late Pleistocene and Holocene high‐frequency sea‐level variations were major factors that modulated the type of depositional environments and their evolution. Another major modulating factor was the antecedent morphology of the ria, with a rock‐incised narrow channel in the middle of the basin (the Ferrol Strait), which influenced the evolution of the ria as it became flooded during Holocene transgression. The strait acted as a rock‐bounded ‘tidal inlet’ enhancing the tidal erosion and deposition at both ends, i.e. with an ebb‐tidal delta in the outer sector and tidal sandbanks in the inner sector. The final step in the evolution of the incised valley into the modern‐defined ria system was driven by the last relative sea‐level rise (after 4 kyr bp ) when the river mouths retreated landward and a single palaeoriver was converted into minor rivers and streams with scattered mouths in an extensive coastal area.  相似文献   

9.
The literature on incised river valley sedimentology is dominated by studies of sediment‐rich systems in which the valley has been filled during and/or shortly after drowning. In contrast, the Holocene evolution of the Kosi Lagoon, South Africa (an incised coastal plain river valley) took place under very low sedimentation rates which have produced a distinctive stratigraphy and contemporary sedimentary environments. The findings are based on a synthesis of the results of studies of seismic stratigraphy, sediment distribution, morphodynamics and geomorphology. Barrier migration was prevented by a high pre‐Holocene dune barrier against which Holocene coastal deposits accumulated in an aggradational sequence. Holocene evolution of the back barrier involved: (i) drowning of the incised valley; (ii) wave‐induced modification of the back‐barrier shoreline leading to segmentation during the highstand; and (iii) marine sedimentation adjacent to the tidal inlet. Segmentation has divided the estuary into a series of geochemically and sedimentologically distinctive basins connected by channels in the estuarine barriers. The seismic stratigraphy of the back barrier essentially lacks a transgressive systems tract, shoreline modification and deposition having been accomplished during the highstand. The lack of historical geomorphological change suggests that the system has achieved morphological equilibrium with ambient energy conditions and low sediment supply. This study presents a classification for estuarine incised valley fills based on the balance between sea‐level rise and sedimentation in which Kosi represents a ‘give‐up’ estuary where much of the relict incised channel form is drowned and preserved. It exhibits a fundamentally different set of evolutionary processes and stratigraphic sequences to those of the better known incised valley systems in which sedimentation either keeps pace with sea‐level (‘keep‐up’ estuaries) or occurs after initial drowning (‘catch‐up’ estuaries).  相似文献   

10.
钱塘江下切河谷充填物沉积序列和分布模式   总被引：1，自引：1，他引：0       下载免费PDF全文
以最新钻取的SE2孔沉积物为重点研究对象,对晚第四纪以来钱塘江下切河谷充填物的沉积特征和沉积相进行了精细研究,重建了研究区地层结构和层序地层格架,总结了强潮型钱塘江河口湾和下切河谷的沉积模式。钱塘江下切河谷充填物自下而上依次发育河床、河漫滩、古河口湾、近岸浅海和现代河口湾5种沉积相类型,表现为一个较完整的Ⅰ型层序,其内部层序界面、初始海泛面、最大海泛面、海侵和海退潮流侵蚀面、体系域内海侵面发育。钱塘江下切河谷充填物自海向陆可划分为海向段、近海段、近陆段和陆向段4段,各段沉积序列和海陆相互作用程度不同。在钱塘江下切河谷充填物中海陆过渡部位首次明确划分出了古河口湾相,并对其沉积特征和分布模式进行了初步探讨;其形成时间在9000 a BP左右,具有与现代河口湾不同的沉积特征,表现为中部为潮道砂体沉积,向陆渐变为受潮流影响的河流沉积,两侧被潮坪或盐沼沉积包围,沉积物在平面上自陆向海呈现粗-细-粗的分布模式。现代河口湾平面上自陆向海依次发育受潮流影响的河流沉积、粉砂质砂坎、潮道-潮流砂脊复合体和湾口泥质沉积区,沉积物呈现粗-细-粗-细的分布模式,与大多数河口湾常见的粗-细-粗的分布格局明显不同。  相似文献   

11.
3D seismic data from the Dogger Bank, North Sea, allow the mapping of Late Pleistocene and Holocene depositional systems in unprecedented detail. The data demonstrate that glacial processes resulted in the development of incised tunnel valley systems during the Weichselian and that these were subsequently modified by fluvial processes in a pro-glacial setting. Subsequently, the Dogger Bank formed an emergent plain during the Holocene with a complex meandering river system, associated tributary or distributary channels and lakes, dominating the region. Prior to the sea level rising sufficiently to submerge the Dogger Bank around 7500 yr ago, the meandering river system was replaced by a dendritic channel network of potential fluvial, estuarine or intertidal origin. As the Holocene depositional features bear no systematic relationship to the bathymetry this study demonstrates that previously published bathymetry-based models for the Holocene palaeogeographic development of the North Sea require modification.  相似文献   

12.
The architectural framework and Holocene evolution of the Zeballos fjord‐head delta on west‐central Vancouver Island was established through a multidisciplinary field‐based study. The Zeballos delta is a composite feature, consisting of an elevated, incised, late Pleistocene delta and an inset Holocene delta graded to present sea level. Both deltas have a classic Gilbert‐type tripartite architecture, with nearly flat topset and bottomset units and an inclined foreset unit. Time domain electromagnetic (TDEM) and ground‐penetrating radar (GPR) surveys, borehole data, and gravel pit exposures provided information on the internal form, lithologies and substrate of both deltas. Both sets of deltaic deposits coarsen upward from silt in the bottomset unit to gravel in the topset unit. The TDEM survey revealed a highly irregular, buried bedrock surface, ranging from 20 m to 190 m in depth, and it delineated saltwater intrusion into the deltaic sediments. Late Quaternary sea‐level change at Zeballos was inferred from delta morphology and the GPR survey. The elevated, late Pleistocene delta was constructed when the sea was about 21 m higher relative to the land than it is today. It was dissected when sea‐level fell rapidly as a result of glacio‐isostatic rebound. Relative sea‐level reached a position about 20 m below the present datum during the early Holocene. Foreset beds that overlap and progressively climb in a seaward direction and topset beds that thicken to 26 m landward imply that the delta aggraded and prograded into Zeballos Inlet during the middle and late Holocene transgression. Sea‐level may have risen above the present datum during the middle Holocene, creating a delta plain at about 4 m a.s.l. Remnants of this surface are preserved along the valley margins. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

13.
Understanding the stratigraphic fill and reconstructing the palaeo‐hydrology of incised valleys can help to constrain those factors that controlled their origin, evolution and regional significance. This condition is addressed through the analysis of a large (up to 18 km wide by 80 m deep) and exceptionally well‐imaged Late Pleistocene incised valley from the Sunda Shelf (South China Sea) based on shallow three‐dimensional seismic data from a large (11 500 km2), ‘merge’ survey, supplemented with site survey data (boreholes and seismic). This approach has enabled the characterization of the planform geometry, cross‐sectional area and internal stratigraphic architecture, which together allow reconstruction of the palaeo‐hydrology. The valley‐fill displays five notable stratigraphic features: (i) it is considerably larger than other seismically resolvable channel forms and can be traced for at least 180 km along its length; (ii) it is located in the axial part of the Malay Basin; (iii) the youngest part of the valley‐fill is dominated by a large (600 m wide and 23 m deep), high‐sinuosity channel, with well‐developed lateral accretion surfaces; (iv) the immediately adjacent interfluves contain much smaller, dendritic channel systems, which resemble tributaries that drained into the larger incised valley system; and (v) a ca 16 m thick, shell‐bearing, Holocene clay caps the valley‐fill. The dimension, basin location and palaeo‐hydrology of this incised valley leads to the conclusion that it represents the trunk river, which flowed along the length of the Malay Basin; it connected the Gulf of Thailand in the north with the South China Sea in the south‐east. The length of the river system (>1200 km long) enables examination of the upstream to downstream controls on the evolution of the incised valley, including sea‐level, climate and tectonics. The valley size, orientation and palaeo‐hydrology suggest close interaction between the regional tectonic framework, low‐angle shelf physiography and a humid‐tropical climatic setting.  相似文献   

14.
The influence of palaeodrainage characteristics, palaeogeography and tectonic setting are rarely considered as controls on stratigraphic organization in palaeovalley or incised valley systems. This study is an examination of the influence of source region vs. downstream base level controls on the sedimentary architecture of a set of bedrock-confined palaeovalleys developed along the distal margin of the Alpine foreland basin in south-eastern France. Three distinct facies associations are observed within the palaeovalley fills. Fluvial facies association A is mainly dominated by poorly sorted, highly disorganized, clast-to-matrix-supported cobble-to-boulder conglomerates that are interpreted as streamflood deposits. Facies association B comprises mainly yellow siltstones and is interpreted as recording deposition in an estuarine basin environment. Estuarine marine facies association C comprises interstratified estuarine siltstones and clean, well-sorted washover sandstones. The sedimentary characteristics of the valley fill successions are related to the proximity of depositional sites to sediment source areas. Palaeovalleys located proximal to structurally controlled basement palaeohighs are entirely dominated by coarse fluvial streamflood deposits. In contrast, distal palaeovalley segments, which are located several kilometres downstream, contain successions showing upward transition from coarse fluvial facies into estuarine central basin fines, and finally into estuarine-marginal marine facies. Facies distributions suggest that the fluvial deposits form wedge-shaped, downstream-thinning sediment bodies, whereas the estuarine deposits form an upstream-thinning wedge. The vertical stacking of fluvial to estuarine to marginal marine depositional environments records the fluvial aggradation and subsequent transgression of relatively small bedrock-confined river valleys, which drained a rugged, upland terrain. Facies geometries suggest that a fluvial sediment wedge initially prograded downvalley, in response to high bed load sediment yields. Subsequently, palaeovalleys became drowned during the passage of a marine transgression, with the establishment of estuarine conditions. Initial fluvial aggradation and subsequent marine flooding of the palaeovalleys is a consequence of the interaction of high local rates of sediment supply and relative sea-level rise driven by flexural subsidence of the basin.  相似文献   

15.
Sedimentation in the upstream reaches of incised valleys is predominantly of alluvial origin and, in most cases, independent from relative sea‐level or lake‐level oscillations. Preserved facies distributions record the depositional response to a combination of allogenic factors, including tectonics, climate and landscape evolution. Tectonics drive fluvial aggradation and degradation through local changes in gradient, both longitudinal and transverse to the valley slope. This article deals with a Pliocene–Pleistocene fluvial valley fill developed in the north‐eastern shoulder of the Siena Basin (Northern Apennines, Italy). Evolution of the valley was not influenced by sea‐level or lake‐level changes and morphological and depositional evolution of valley resulted from extensional tectonics that gave rise to normal and oblique‐slip faults orthogonal and parallel to the valley axis. Data from both field observations and geophysical study are interpreted to develop a comprehensive tectono‐sedimentary model of coeval longitudinal and lateral tilting of the developing alluvial plain. Longitudinal tilting was generated by a transverse, upstream‐dipping normal fault that controlled the aggradation of fining‐upward strata sets. Upstream of the fault zone, valley back‐filling generated an architecture similar to that of classic, sea‐level‐controlled, coastal incised valleys. Downstream of the fault zone, valley down‐filling was related to an overwhelming sediment supply sourced and routed from the active fault zone itself. Lateral tilting was promoted by the activity of a fault oriented parallel to the valley axis, as well as by different offsets along near orthogonal faults. As a result, the valley trunk system experienced complex lateral shifts, which were governed by interacting fault‐generated subsidence and by the topographic confinement of progradational, flank‐sourced alluvial fans.  相似文献   

16.
The Miocene Barreiras Formation in the Middle Rio Capim area records an incised valley system for which facies analysis and ichnology (Skolithos, Ophiomorpha, Planolites, Gyrolithes, Taenidium) suggest an estuarine character. Three stratigraphic units are recognized (from bottom to top): Unit 1 includes an inner estuarine tidal channel complex and tidal flat/salt marsh deposits; Unit 2 consists of estuarine bay/lagoon and flood tidal delta deposits related to the estuary mouth; and Unit 3 includes a tidal channel with a tidal point bar, as well as tidal flat/salt marsh deposits similar to those from Unit 1. These units and their bounding surfaces record the history of relative sea level changes in the estuary. After a sea level drop, the valley was inundated and formed an amalgamated sequence boundary and transgressive surface. Transgression (Unit 1) promoted the landward shift of flood tidal deltas and lagoon settings (Unit 2). The system then moved seaward, with the superposition of inner estuarine deposits (Unit 3) over Unit 2. Facies architecture seems to have been controlled by tectonics, as shown by: the paleovalley orientation according to the main tectonic structures of the basin; the presence of faults and fractures that displace the basal unconformity; and the abundance of soft sediment deformation.  相似文献   

17.
本文根据杭州湾沿海平原大量的钻井、静力触探井和分析化验等资料，研究了下切河谷（钱塘江和太湖下切河谷）充填物的沉积建造和沉积相，以及浅层生物气藏分布特征。研究表明，末次冰期以来，随着海平面变化，杭州湾地区下切河谷演化经历了深切、快速充填和埋藏三个阶段。末次冰盛期，海平面下降的幅度大，增加了河流梯度、加强了下切作用，本区形成了钱塘江和太湖下切河谷，随后在冰后期被充填和埋藏，下切河谷的两侧为暴露地表的古河间地。根据岩石学、沉积结构和沉积构造特征，本区下切河谷充填沉积物表现为向上变细的沉积层序，可以划分为4个沉积相类型，有河床滞留沉积物到部分曲流河沉积体系的边滩沉积、河漫滩-河口湾沉积、河口湾-浅海沉积和河口湾沙坝沉积。在河漫滩-河口湾相沉积期间，由于海平面上升、潮流体系、沉积物供给和可容空间条件适合一个潮流沙脊体系的发育，该相中砂质透镜体可能代表下切河谷内发育的潮流沙脊。对于河口湾-浅海沉积和河口湾沙坝沉积而言，由于沉积条件不再有利，没有形成沙脊沉积。所有的商业性生物气都存储在下切河谷内河漫滩-河口湾砂质透镜体中。  相似文献   

18.
The Gulf of Tonkin coastline migrated at an average rate of ca 60 m year?1 landward during Holocene sea‐level rise (20 to 8 ka). Due to a combination of rapid coastline migration and undersupply of sand, neither coastal barriers nor tidal sand bars developed at the mouth of the Red River incised valley. Only a 30 to 80 cm thick sandy interval formed at the base of full‐marine deposits. Thus, the river mouth represented a mud‐dominated open funnel‐shaped estuary during transgression. At the base of the valley fill, a thin fluvial lag deposit marks a period of lowered sea‐level when the river did not reach geomorphic equilibrium and was thus prone to erosion. The onset of base‐level rise is documented by non‐bioturbated to sparsely bioturbated mud that occasionally contains pyrite indicating short‐term seawater incursions. Siderite in overlying deposits points to low‐salinity estuarine conditions. The open funnel‐shaped river mouth favoured upstream incursion of seawater that varied inversely to the seasonal strongly fluctuating discharge: several centimetres to a few tens of centimetres thick intervals showing marine or freshwater dominance alternate, as indicated by bioturbational and physical sedimentary structures, and by the presence of Fe sulphides or siderite, respectively. Recurrent short‐term seawater incursions stressed the burrowing fauna. The degree of bioturbation increases upward corresponding to increasing marine influence. The uppermost estuarine sediments are completely bioturbated. The estuarine deposits aggraded on average rapidly, up to several metres kyr?1. Siphonichnidal burrows produced by bivalves, however, document recurrent episodes of enhanced deposition (>0·5 m) and pronounced erosion (<1 m) that are otherwise not recorded. The slope of the incised valley affected the sedimentary facies. In steep valley segments, the marine transgressive surface (equivalent to the onset of full‐marine conditions) is accentuated by the Glossifungites ichnofacies, whereas in gently sloped valley segments the marine transgressive surface is gradational and bioturbated. Marine deposits are completely bioturbated.  相似文献   

19.
Four phases of cross‐cutting tunnel valleys imaged on 3‐D seismic datasets are mapped within the Middle–Late Pleistocene succession of the central North Sea basin (Witch Ground area). In plan the tunnel valleys form complex anastomosing networks, with tributary valleys joining main valleys at high angles. The valleys have widths ranging from 250 to 2300 m, and base to shoulder relief varying between 30 and 155 m, with irregular long‐axis profiles characteristic of erosion by water driven by glaciostatic pressures. The youngest phase of tunnel valleys are smaller and have a thinner infill than the older generations. The fill of the larger valleys comprises three seismic facies, the lowermost of which has high amplitudes and is discontinuous. The middle facies consists of wedge‐shaped packages of low‐angle dipping reflectors and is overlain by a facies characterised by sub‐horizontal reflectors, which onlap the valley margins. The seismic character, and comparison with lithologies identified in other northwest European Pleistocene tunnel valleys both onshore and offshore, suggests that the lower two seismic facies are most likely sand and gravel‐dominated, while the uppermost facies consists of glaciolacustrine and marine muds. The 3‐D morphology of the valley margins combined with the geometry of the infill packages suggest that episodic discharge of subglacial meltwater was responsible for incising the valleys and depositing at least some of the infill. Proglacial glaciofluvial deposits are inferred to account for some of the fill overlying the subglacial deposits. Glaciolacustrine and marine muds filled remaining valley topography as the ice sheet retreated. The preserved valley margins are shown to be time‐transgressive erosion surfaces that record changes in geometry of the tunnel valley system as it evolved through time, implying that valleys associated with each ice‐sheet advance/retreat cycle were dynamic and probably long‐lived. Within the constraints of the existing stratigraphy the oldest tunnel valleys in the Witch Ground area of the central North Sea are most likely to be Marine Isotope Stage (MIS) 12 (Elsterian, ca. 470 ka) in age and the youngest pre‐MIS 5e (last interglacial, ca. 120 ka). If each tunnel valley phase was formed during the retreat of a major ice sheet then four glaciations with ice coverage of the central North Sea are recorded in the pre‐Weichselian, Middle–Late Pleistocene stratigraphy. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

20.
Incised valleys are canyon‐like features that initially form near the highstand shoreline and evolve over geological time as rivers erode into coastal plains and continental shelves to maintain equilibrium‐gradient profiles in response to sea‐level fall. Most of these valleys flood during sea‐level rise to form estuaries. Incised‐valley morphology strongly controls the rate of creation of sediment accommodation, valley‐fill facies architecture and the preservation potential of coastal lithosomes on continental shelves, and affects coastal physical processes. Nonetheless, little is known about what dictates incised‐valley size and shape and whether these metrics can be used to explain principal formation processes. The main control on alluvial channel morphology over human time scales is discharge; this is based on numerous empirical studies and is well‐constrained because all variables are easily measured at this short time scale. Knowledge of long‐term river evolution over a complete glacio‐eustatic cycle, on the contrary, remains largely conceptual, experimental and based on individual systems because variables that are thought to drive morphological change are not easily quantified. In spite of this difficulty, existing models of incised‐valley formation at the coast suggest that valley evolution is driven largely by downstream forcing mechanisms, highlighting sea‐level and shelf gradient/morphology as the dominant controls on valley incision. Although valleys are cut by rivers, whose channels are a direct reflection of discharge, little empirical data exist in coastal areas to address the degree to which valley evolution is governed by upstream controls. The late Quaternary is the best time period to examine because it provides the most complete sedimentary record and many variables, including sea‐level, tectonics, substrate lithology and drainage network characteristics, are accurately constrained. Here, 38 late Quaternary valleys along the coast of two different passive continental margins are compared, which suggests that valley shape and size are governed primarily by upstream, intrinsic controls such as discharge. Valley width, depth and cross‐sectional area are found to be predictable at the highstand shoreline and are scaled with the size of their drainage basin, which has important implications for estimating sediment discharge to continental shelves and deep water environments during periods of low sea‐level.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号