Natural highways for end-of-life solutions in the LEO region     

Elisa Maria Alessi  Giulia Schettino  Alessandro Rossi  Giovanni B. Valsecchi 《Celestial Mechanics and Dynamical Astronomy》2018,130(5):34

We present the main findings of a dynamical mapping performed in the Low Earth Orbit region. The results were obtained by propagating an extended grid of initial conditions, considering two different epochs and area-to-mass ratios, by means of a singly averaged numerical propagator. It turns out that dynamical resonances associated with high-degree geopotential harmonics, lunisolar perturbations and Solar radiation pressure can open natural deorbiting highways. For area-to-mass ratios typical of the orbiting intact objects, these corridors can be exploited only in combination with the action exerted by the atmospheric drag. For satellites equipped with an area augmentation device, we show the boundary of application of the drag, and where the Solar radiation pressure can be exploited.  相似文献   

Rockfall seismic features analysis based on in situ tests:frequency,amplitude, and duration     

Liang FENG  Veronica PAZZI  Emanuele INTRIERI  Teresa GRACCHI  Giovanni GIGLI 《山地科学学报》2019,(5)

In the seismic event classification,determining the seismic features of rockfall is significantly important for the automatic classification of seismic events because of the huge amount of raw data recorded by seismic stations in continuous monitoring. At the same time, the rockfall seismic features are still not completely understood.This study concentrates on the rockfall frequency content, amplitude(ground velocity), seismic waveform and duration analysis, of an artificial rockfall test at Torgiovannetto(a former quarry in Central Italy). A total of 90 blocks were released in the test, and their seismic signals and moving trajectories were recorded by four tri-axial seismic stations and four cameras, respectively. In the analysis processing,all the artificial rockfall signal traces were cut separately and the seismic features were extracted individually and automatically. In this study, the relationships between a) frequency content and impacted materials, b) frequency content and the distance between block releasing position and seismic station(source-receiver distance) were discussed. As a result, we found that the frequency content of rockfall focuses on 10-60 Hz and 80-90 Hz within a source-receiver distance of 200 m, and it is well correlated with impacted material and source-receiver distance. To evaluate the difference between earthquake and rockfall, 23 clear earthquake signals recorded in a seven month-long continuous seismic monitoring, carried out with the four seismic stations, were picked out, according to the Italian national earthquakes database(INGV). On these traces we performed the same analysis as in the artificial rockfall traces, and two parameters were defined to separate rockfall events from earthquake noise. The first one, the amplitude ratio, is related to the amplitude variation of rockfall between two stations and is greater than that of earthquakes, because of the higher attenuation occurring for rockfall events, which consists in high frequencies whereas for earthquakes it consists in low frequencies. The other parameter, the shape of waveform of signal trace, showed a significant difference between rockfall and earthquake and that could be a complementary feature to discriminate between both. This analysis of artificial rockfall is a first step helpful to understand the seismic characteristics of rockfall, and useful for rockfall seismic events classification in seismic monitoring of slope.  相似文献   

Measuring impact crater depth throughout the solar system          下载免费PDF全文

Stuart J. Robbins  Wesley A. Watters  John E. Chappelow  Veronica J. Bray  Ingrid J. Daubar  Robert A. Craddock  Ross A. Beyer  Margaret Landis  Lillian R. Ostrach  Livio Tornabene  Jamie D. Riggs  Brian P. Weaver 《Meteoritics & planetary science》2018,53(4):583-637

One important, almost ubiquitous, tool for understanding the surfaces of solid bodies throughout the solar system is the study of impact craters. While measuring a distribution of crater diameters and locations is an important tool for a wide variety of studies, so too is measuring a crater's “depth.” Depth can inform numerous studies including the strength of a surface and modification rates in the local environment. There is, however, no standard data set, definition, or technique to perform this data-gathering task, and the abundance of different definitions of “depth” and methods for estimating that quantity can lead to misunderstandings in and of the literature. In this review, we describe a wide variety of data sets and methods to analyze those data sets that have been, are currently, or could be used to derive different types of crater depth measurements. We also recommend certain nomenclature in doing so to help standardize practice in the field. We present a review section of all crater depths that have been published on different solar system bodies which shows how the field has evolved through time and how some common assumptions might not be wholly accurate. We conclude with several recommendations for researchers which could help different data sets to be more easily understood and compared.  相似文献   

Establishment of ICL Italian network   总被引：1，自引：1，他引：0  

Nicola Casagli  Veronica Tofani 《Landslides》2018,15(10):1907-1908

  相似文献   

Implementing landslide path dependency in landslide susceptibility modelling     

Jalal Samia  Arnaud Temme  Arnold K. Bregt  Jakob Wallinga  John Stuiver  Fausto Guzzetti  Francesca Ardizzone  Mauro Rossi 《Landslides》2018,15(11):2129-2144

Landslide susceptibility modelling—a crucial step towards the assessment of landslide hazard and risk—has hitherto not included the local, transient effects of previous landslides on susceptibility. In this contribution, we implement such transient effects, which we term “landslide path dependency”, for the first time. Two landslide path dependency variables are used to characterise transient effects: a variable reflecting how likely it is that an earlier landslide will have a follow-up landslide and a variable reflecting the decay of transient effects over time. These two landslide path dependency variables are considered in addition to a large set of conditioning attributes conventionally used in landslide susceptibility. Three logistic regression models were trained and tested fitted to landslide occurrence data from a multi-temporal landslide inventory: (1) a model with only conventional variables, (2) a model with conventional plus landslide path dependency variables, and (3) a model with only landslide path dependency variables. We compare the model performances, differences in the number, coefficient and significance of the selected variables, and the differences in the resulting susceptibility maps. Although the landslide path dependency variables are highly significant and have impacts on the importance of other variables, the performance of the models and the susceptibility maps do not substantially differ between conventional and conventional plus path dependent models. The path dependent landslide susceptibility model, with only two explanatory variables, has lower model performance, and differently patterned susceptibility map than the two other models. A simple landslide susceptibility model using only DEM-derived variables and landslide path dependency variables performs better than the path dependent landslide susceptibility model, and almost as well as the model with conventional plus landslide path dependency variables—while avoiding the need for hard-to-measure variables such as land use or lithology. Although the predictive power of landslide path dependency variables is lower than those of the most important conventional variables, our findings provide a clear incentive to further explore landslide path dependency effects and their potential role in landslide susceptibility modelling.  相似文献   

Holocene relative sea level changes in the Västervik-Gamlebyviken region on the southeast coast of Sweden,southern Baltic Sea     

Christos Katrantsiotis  Martin Dahl  Veronica Palm  Johan Rönnby  Thomas Andrén  Elinor Andrén 《Boreas: An International Journal of Quaternary Research》2023,52(2):206-222

We reconstruct the Holocene shore displacement of the Västervik-Gamlebyviken area on the southeast coast of Sweden, characterised by a maritime cultural landscape and archaeological significance since the Mesolithic. Sediment cores were retrieved from four lake basins that have been raised above sea level due to the postglacial land uplift and eustatic sea level changes after the melting of the Fennoscandian Ice Sheet. The cores were radiocarbon dated and analysed for loss on ignition and diatoms. The isolation thresholds of the basins were determined using LiDAR data. The results provide evidence for the initiation of the first Littorina Sea transgression in this area at 8.5 thousand calibrated years before present (cal. ka BP). A relative sea level rise by ∼7 m a.s.l. is recorded between 8.0 and 7.5 cal. ka BP with a highstand at ∼22 m a.s.l. between 7.5 and 6.2 cal. ka BP. These phases coincide with the second and third Littorina Sea transgressions, respectively, in the Blekinge area, southern Sweden and are consistent with the final deglaciation of North America. After 6.2 cal. ka BP, the relative sea level dropped below 22 m a.s.l., and remained at ∼20 m a.s.l. until 4.6 cal. ka BP coinciding with the fourth Littorina Sea transgression in Blekinge. From 4.6 to 4.2 cal. ka BP, the shore displacement shows a regression rate of 10 mm a⁻¹ followed by a slowdown with a mean value of 4.6 mm a⁻¹ until 1.6 cal. ka BP, when the relative sea level dropped below 3.3 m a.s.l. The Middle to Late Holocene highstand and other periods of minor sea level transgressions and/or higher salinity between 6.2 and 1.7 cal. ka BP are attributed to a combination of warmer climate and higher inflow of saline waters in the southern Baltic Sea due to stronger westerlies, caused by variations in the North Atlantic atmospheric patterns.  相似文献   

Statistical identification of orographic effects in the regional analysis of extreme rainfall          下载免费PDF全文

Pierluigi Furcolo  Anna Pelosi  Fabio Rossi 《水文研究》2016,30(9):1342-1353

Regional models of extreme rainfall must address the spatial variability induced by orographic obstacles. However, the proper detection of orographic effects often depends on the availability of a well‐designed rain gauge network. The aim of this study is to investigate a new method for identifying and characterizing the effects of orography on the spatial structure of extreme rainfall at the regional scale, including where rainfall data are lacking or fail to describe rainfall features thoroughly. We analyse the annual maxima of daily rainfall data in the Campania region, an orographically complex region in Southern Italy, and introduce a statistical procedure to identify spatial outliers in a low order statistic (namely the mean). The locations of these outliers are then compared with a pattern of orographic objects that has been a priori identified through the application of an automatic geomorphological procedure. The results show a direct and clear link between a particular set of orographic objects and a local increase in the spatial variability of extreme rainfall. This analysis allowed us to objectively identify areas where orography produces enhanced variability in extreme rainfall. It has direct implications for rain gauge network design criteria and has led to promising developments in the regional analysis of extreme rainfall. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Biosedimentary record of postglacial coastal dynamics: high‐resolution sequence stratigraphy from the northern Tuscan coast (Italy)     

Alessandro Amorosi  Veronica Rossi  Daniele Scarponi  Stefano Claudio Vaiani  Anupam Ghosh 《Boreas: An International Journal of Quaternary Research》2014,43(4):939-954

Integrating analysis of the benthic palaeoecological record with multivariate ordination techniques represents a powerful synergy able to provide an improved characterization of coastal depositional facies in a sequence stratigraphical perspective. Through quantitative analysis of benthic foraminifer, ostracod and mollusc associations from the postglacial succession of Core M3 (Arno coastal plain, Tuscany, Italy), and application of detrended correspondence analysis (DCA) to the mollusc sub‐data set, we offer a refined picture of stratigraphical variations in faunal content from a paralic depositional setting, and reconstruct the palaeoenvironmental gradients that account for such variations. Despite distinct ecological behaviours, and taphonomic and sedimentological constraints, a strong ecological control on meio‐ and macrofaunal biofacies and taxa turnover is documented across the study succession. Amongst all possible mechanisms that may play a role in ‘shaping’ fossil distribution, the ecological signal driven by salinity represents the most prominent factor controlling the composition of fossil associations in the cored succession. Molluscs can even provide outstanding quantitative estimates of palaeosalinity along the sampled core. When plotted stratigraphically, the three fossil sub‐data sets show consistent patterns of vertical evolution that enable prompt identification of the key surfaces for sequence stratigraphical interpretation in otherwise lithologically indistinguishable deposits. The concomitant maximum richness of species with strong marine affinity, paralleled by the highest DCA salinity estimates, allows recognition of the maximum flooding zone, dated to ～7.7 cal. ka BP, within a homogeneous succession of outer lagoon clays. These clays are sandwiched between early transgressive, swamp to inner lagoon deposits and overlying prograding coastal?alluvial plain facies.  相似文献   

Degradation and Detoxification of Chlorophenols in Continuous‐Flow Fixed‐Bed Aerobic Reactors     

Alfredo Gallego  Virginia L. Gemini  Susana L. Rossi  Carlos E. Gómez  Gustavo D. Bulus Rossini  Sonia E. Korol 《洁净——土壤、空气、水》2011,39(8):774-780

An indigenous bacterial strain of Delftia sp. capable of degrading 2,4‐dicholorophenol and an indigenous bacterial community that degrades 2,4,6‐trichlorophenol (TCP) were employed to inoculate continuous down‐flow fixed‐bed reactors. Continuous‐reactors were constructed from PVC employing hollow PVC cylinders as support material. Synthetic wastewater was prepared by dissolving the corresponding chlorophenol in non‐sterile groundwater. Biodegradation was evaluated by spectrophotometry, chloride release, GC, and microbial growth. Detoxification was evaluated by using Daphnia magna as test organism. Delftia sp. was able to remove an average of 95.6% of DCP. Efficiency in terms of chemical oxygen demand (COD) was of 88.9%. The indigenous bacterial community that degrades TCP reached an average efficiency of 96.5 and 91.6% in terms of compound and COD removal, respectively. In both cases stoichiometric removal of chloride and detoxification was achieved. When synthetic wastewater feed was cut off for 7 days, both reactors showed a fast recovery after inflow restarting, reaching average outlet concentration values within 36 h. The promising behavior of the microorganisms and the low cost of the reactors tested allow us to suggest their possible application to remediation processes.  相似文献   

The 2012 Emilia (Northern Italy) earthquake sequence: an attempt of historical reading     

L. Graziani  F. Bernardini  C. Castellano  S. Del Mese  E. Ercolani  A. Rossi  A. Tertulliani  M. Vecchi 《Journal of Seismology》2015,19(2):371-387

  相似文献