共查询到20条相似文献，搜索用时 15 毫秒
1.
结合机载、星载激光雷达对GLAS(地球科学激光测高系统)光斑范围内的森林地上生物量进行估测,并利用MODIS植被产品以及MERIS土地覆盖产品进行了云南省森林地上生物量的连续制图。机载LiDAR扫描的260个训练样本用于构建星载GLAS的森林地上生物量估测模型,模型的决定系数(R2)为0.52,均方根误差(RMSE)为31Mg/ha。研究结果显示,云南省总森林地上生物量为12.72亿t,平均森林地上生物量为94Mg/ha。估测的森林地上生物量空间分布情况与实际情况相符,森林地上生物量总量与基于森林资源清查数据的估测结果相符,表明了利用机载LiDAR与星载ICESatGLAS结合进行大区域森林地上生物量估测的可靠性。 相似文献
2.
3.
Forest structural diversity metrics describing diversity in tree size and crown shape within forest stands can be used as indicators of biodiversity. These diversity metrics can be generated using airborne laser scanning (LiDAR) data to provide a rapid and cost effective alternative to ground-based inspection. Measures of tree height derived from LiDAR can be significantly affected by the canopy conditions at the time of data collection, in particular whether the canopy is under leaf-on or leaf-off conditions, but there have been no studies of the effects on structural diversity metrics. The aim of this research is to assess whether leaf-on/leaf-off changes in canopy conditions during LiDAR data collection affect the accuracy of calculated forest structural diversity metrics. We undertook a quantitative analysis of LiDAR ground detection and return height, and return height diversity from two airborne laser scanning surveys collected under leaf-on and leaf-off conditions to assess initial dataset differences. LiDAR data were then regressed against field-derived tree size diversity measurements using diversity metrics from each LiDAR dataset in isolation and, where appropriate, a mixture of the two. Models utilising leaf-off LiDAR diversity variables described DBH diversity, crown length diversity and crown width diversity more successfully than leaf-on (leaf-on models resulted in R² values of 0.66, 0.38 and 0.16, respectively, and leaf-off models 0.67, 0.37 and 0.23, respectively). When LiDAR datasets were combined into one model to describe tree height diversity and DBH diversity the models described 75% and 69% of the variance (R² of 0.75 for tree height diversity and 0.69 for DBH diversity). The results suggest that tree height diversity models derived from airborne LiDAR, collected (and where appropriate combined) under any seasonal conditions, can be used to differentiate between simple single and diverse multiple storey forest structure with confidence. 相似文献
4.
The Geoscience Laser Altimeter System (GLAS) aboard Ice, Cloud and land Elevation Satellite (ICESat) is a spaceborne LiDAR sensor. It is the first LiDAR instrument which can digitize the backscattered waveform and offer near global coverage. Among others, scientific objectives of the mission include precise measurement of vegetation canopy heights. Existing approaches of waveform processing for canopy height estimation suggest Gaussian decomposition of the waveform which has the limitation to properly characterize significant peaks and results in discrepant information. Moreover, in most cases, Digital Terrain Models (DTMs) are required for canopy height estimation. This paper presents a new automated method of GLAS waveform processing for extracting vegetation canopy height in the absence of a DTM. Canopy heights retrieved from GLAS waveforms were validated with field measured heights. The newly proposed method was able to explain 79% of variation in canopy heights with an RMSE of 3.18 m, in the study area. The unexplained variation in canopy heights retrieved from GLAS data can be due to errors introduced by footprint eccentricity, decay of energy between emitted and received signals, uncertainty in the field measurements and limited number of sampled footprints.Results achieved with the newly proposed method were encouraging and demonstrated its potential of processing full-waveform LiDAR data for estimating forest canopy height. The study also had implications on future full-waveform spaceborne missions and their utility in vegetation studies. 相似文献
5.
机载激光雷达及高光谱的森林乔木物种多样性遥感监测 总被引：1，自引：0，他引：1
利用机载LiDAR和高光谱数据并结合37个地面调查样本数据,基于结构差异与光谱变异理论,通过相关分析法分别筛选了3个最优林冠结构参数和6个最优光谱指数,在单木尺度上利用自适应C均值模糊聚类算法,在神农架国家自然保护区开展森林乔木物种多样性监测,实现了森林乔木物种多样性的区域成图。研究结果表明,(1)基于结合形态学冠层控制的分水岭算法可以获得较高精度的单木分割结果(R~2=0.88,RMSE=13.17,P0.001);(2)基于LiDAR数据提取的9个结构参数中,95%百分位高度、冠层盖度和植被穿透率为最优结构参数,与Shannon-Wiener指数的相关性达到R~2=0.39—0.42(P0.01);(3)基于机载高光谱数据筛选的16个常用的植被指数中,CRI、OSAVI、Narrow band NDVI、SR、Vogelmann index1、PRI与Shannon-Wiener指数的相关性最高(R~2=0.37—0.45,P0.01);(4)在研究区,利用以30 m×30 m为窗口的自适应模糊C均值聚类算法可预测的最大森林乔木物种数为20,物种丰富度的预测精度为R~2=0.69,RMSE=3.11,Shannon-Wiener指数的预测精度为R~2=0.70,RMSE=0.32。该研究在亚热带森林开展乔木物种多样性监测,是在区域尺度上进行物种多样性成图的重要实践,可有效补充森林生物多样性本底数据的调查手段,有助于实现生物多样性的长期动态监测及科学分析森林物种多样性的现状和变化趋势。 相似文献
6.
Phil Wilkes Mathias Disney Matheus Boni Vicari Kim Calders Andrew Burt 《Carbon balance and management》2018,13(1):10
Background
Urban trees have long been valued for providing ecosystem services (mitigation of the “heat island” effect, suppression of air pollution, etc.); more recently the potential of urban forests to store significant above ground biomass (AGB) has also be recognised. However, urban areas pose particular challenges when assessing AGB due to plasticity of tree form, high species diversity as well as heterogeneous and complex land cover. Remote sensing, in particular light detection and ranging (LiDAR), provide a unique opportunity to assess urban AGB by directly measuring tree structure. In this study, terrestrial LiDAR measurements were used to derive new allometry for the London Borough of Camden, that incorporates the wide range of tree structures typical of an urban setting. Using a wall-to-wall airborne LiDAR dataset, individual trees were then identified across the Borough with a new individual tree detection (ITD) method. The new allometry was subsequently applied to the identified trees, generating a Borough-wide estimate of AGB.Results
Camden has an estimated median AGB density of 51.6 Mg ha–1 where maximum AGB density is found in pockets of woodland; terrestrial LiDAR-derived AGB estimates suggest these areas are comparable to temperate and tropical forest. Multiple linear regression of terrestrial LiDAR-derived maximum height and projected crown area explained 93% of variance in tree volume, highlighting the utility of these metrics to characterise diverse tree structure. Locally derived allometry provided accurate estimates of tree volume whereas a Borough-wide allometry tended to overestimate AGB in woodland areas. The new ITD method successfully identified individual trees; however, AGB was underestimated by ≤?25% when compared to terrestrial LiDAR, owing to the inability of ITD to resolve crown overlap. A Monte Carlo uncertainty analysis identified assigning wood density values as the largest source of uncertainty when estimating AGB.Conclusion
Over the coming century global populations are predicted to become increasingly urbanised, leading to an unprecedented expansion of urban land cover. Urban areas will become more important as carbon sinks and effective tools to assess carbon densities in these areas are therefore required. Using multi-scale LiDAR presents an opportunity to achieve this, providing a spatially explicit map of urban forest structure and AGB.7.
大光斑激光雷达数据已广泛应用于森林冠层高度提取,但通常仅限于地形坡度小于20°的平缓地区。在地形坡度大于20°的陡峭山区,地形引起的波形展宽使得地面回波和植被回波信息混合在一起,给森林冠层高度提取带来巨大挑战。本文利用激光雷达回波模型和地形信息,提出了一种模型辅助的坡地森林冠层高度反演算法。该方法以激光雷达回波信号截止点为参考,定义了波形高度指数H50和H75,使用激光雷达回波模型与已知地形信息模拟裸地的激光雷达回波,将裸地回波信号截止点与森林激光雷达回波信号截止点对齐,利用裸地回波计算常用的波形相对高度指数RH50和RH75,对森林冠层高度进行反演。并与高斯波形分解法和波形参数法的反演结果进行了比较。研究结果表明:(1)利用所提取的波形指数RH50和RH75对胸高断面积加权平均高(Lorey’s height)进行了估算,在坡度小于20°时,高斯波形分解法、波形参数法和模型辅助法的估算结果与实测值线性拟合的相关系数(R2)分别为0.70,0.78和0.98,对应的均方根误差(RMSE)分别为2.90 m,2.48 m和0.60 m,模型辅助法略优于其他两种方法;(2)在坡度大于20°时,高斯波形分解法、波形参数法和模型辅助法的R2分别为0.14,0.28和0.97,相应的RMSE分别为4.93 m,4.53 m和0.81 m,模型辅助法明显优于其他两种方法;(3)在0°—40°时,模型辅助法对Lorey’s height估算结果与实测值的R2为0.97,RMSE为0.80 m。本研究提出的模型辅助法具有更好的地形适应性,在0°—40°的坡度范围内具备对坡地森林冠层高度反演的潜力。 相似文献
8.
Detailed forest height data are an indispensable prerequisite for many forestry and earth science applications. Existing research of using Geoscience Laser Altimeter System (GLAS) data mainly focuses on deriving average or maximum tree heights within a GLAS footprint, i.e. an ellipse with a diameter of 65 m. However, in most forests, it is likely that the tree heights within such ellipse are heterogeneous. Therefore, it is desired to uncover detailed tree height variation within a GLAS footprint. To the best of our knowledge, no such methods have been reported as of now. In this study, we aim to characterize tree heights’ variation within a GLAS footprint as different layers, each of which corresponds to trees with similar heights. As such, we developed a new method that embraces two steps: first, a refined Levenberg–Marquardt (LM) algorithm is proposed to decompose raw GLAS waveform into multiple Gaussian signals, within which it is hypothesized that each vegetation signal corresponds to a particular tree height layer. Second, for each layer, three parameters were first defined: Canopy Top Height (CTH), Crown Length (CL), and Cover Proportion (CP). Then we extracted the three parameters from each Gaussian signal through a defined model. In order to test our developed method, we set up a study site in Ejina, China where the dominant specie is Populus euphratica. Both simulated and field tree height data were adopted. With regard to the simulation data, results presented a very high agreement for the three predefined parameters between our results and simulation data. When our methods were applied to the field data, the respective R2 become 0.78 (CTH), CL (R2 = 0.76), CP (R2 = 0.74). Overall, our studies revealed that large footprint GLAS waveform data have the potentials for obtaining detailed forest height variation. 相似文献
9.
Fabio Maselli Marta ChiesiAlessandro Montaghi Enzo Pranzini 《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(5):662-671
Airborne LiDAR techniques can provide accurate measurements of tree height, from which estimates of stem volume and forest woody biomass can be obtained. These techniques, however, are still expensive to apply repeatedly over large areas. The current paper presents a methodology which first transforms mean stand heights obtained from LiDAR over small strips into relevant stem volume estimates. These are then extended over an entire forest by applying two estimation methods (k-NN and locally calibrated regression) to Landsat ETM+ images. The methodology is tested over a coastal area covered by pine forest in the Regional Park of San Rossore (Central Italy). The results are evaluated by comparison with the ground stem volumes of a recent forest inventory, taking into consideration the effect of stand size. In general, the accuracies of two estimation methods are dependent on the size of the forest stands and are satisfactory only when considering stands larger than 5-10 ha. The outputs of the parametric regression procedure are slightly more stable than those of k-NN and more faithfully reproduce the spatial patterns of the ground data. 相似文献
10.
Individual tree crown delineation is of great importance for forest inventory and management. The increasing availability of high-resolution airborne light detection and ranging (LiDAR) data makes it possible to delineate the crown structure of individual trees and deduce their geometric properties with high accuracy. In this study, we developed an automated segmentation method that is able to fully utilize high-resolution LiDAR data for detecting, extracting, and characterizing individual tree crowns with a multitude of geometric and topological properties. The proposed approach captures topological structure of forest and quantifies topological relationships of tree crowns by using a graph theory-based localized contour tree method, and finally segments individual tree crowns by analogy of recognizing hills from a topographic map. This approach consists of five key technical components: (1) derivation of canopy height model from airborne LiDAR data; (2) generation of contours based on the canopy height model; (3) extraction of hierarchical structures of tree crowns using the localized contour tree method; (4) delineation of individual tree crowns by segmenting hierarchical crown structure; and (5) calculation of geometric and topological properties of individual trees. We applied our new method to the Medicine Bow National Forest in the southwest of Laramie, Wyoming and the HJ Andrews Experimental Forest in the central portion of the Cascade Range of Oregon, U.S. The results reveal that the overall accuracy of individual tree crown delineation for the two study areas achieved 94.21% and 75.07%, respectively. Our method holds great potential for segmenting individual tree crowns under various forest conditions. Furthermore, the geometric and topological attributes derived from our method provide comprehensive and essential information for forest management. 相似文献
11.
估算森林地上生物量(AGB)对于全球实现碳中和目标至关重要。本文以美国缅因州Howland森林为研究区域,借助地面实测样地数据,对比分析协同不同数据源(高光谱和LiDAR)和机器学习算法(随机森林、支持向量机、梯度提升决策树和K最邻近回归)的研究,以改善Howland森林的生物量估计精度。结果表明,采用LiDAR和高光谱植被指数变量模型的最佳精度分别为0.874和0.868,协同高光谱和LiDAR变量并采用梯度提升决策树回归模型的精度为0.927,即多源遥感数据要优于单一数据源。高光谱和LiDAR数据的协同使用对于提高类似于Howland地区或更广泛区域的生物量估计的准确性,具有普遍的适用性与一定的应用前景。 相似文献
12.
集成Landsat OLI和机载LiDAR条带数据的亚热带森林生物量制图 总被引：1，自引：0，他引：1
以亚热带天然次生林为研究对象,借助一个条带的少量LiDAR点云数据和覆盖整个研究区的免费Landsat OLI多光谱数据,并结合地面实测数据,探索森林生物量低成本高精度制图方法。首先,提取了OLI和LiDAR特征变量,并与地上和地下生物量进行相关分析以筛选变量;然后,借助LiDAR数据覆盖区的样地和条带LiDAR数据构建"LiDAR生物量模型";再从LiDAR反演生物量的结果中进行采样,结合OLI特征变量构建"LiDAR-OLI模型";最后,与单独使用OLI多光谱数据建立的"OLI估算模型"结果进行比较,分析精度并验证新方法的效果。结果表明,"LiDAR-OLI模型"对地上和地下生物量的模型拟合效果较好且均优于"OLI模型",且其交叉验证的精度也较高并优于"OLI模型",从而证明了新方法的可靠性及有效性。本研究为主、被动遥感技术在中小尺度上协同反演森林参数提供了实验基础,也为基于全覆盖免费OLI多光谱数据及条带LiDAR数据的低成本森林生物量制图探索了技术路线。 相似文献
13.
Forest plantations are an important source of terrestrial carbon sequestration. The forest of Robinia pseudoacacia in the Yellow River Delta (YRD) is the largest artificial ecological protection forest in China. However, more than half of the forest has appeared different degrees of dieback and even death since the 1990s. Timely and accurate estimation of the forest aboveground biomass (AGB) is a basis for studying the carbon cycle of forests. Light Detecting and Ranging (LiDAR) has been proved to be one of the most powerful methods for forest biomass estimation. However, because of an irregular and overlapping shape of the broadleaved forest canopy in a growing season, it is difficult to segment individual trees and estimate the tree biomass from airborne LiDAR data. In this study, a new method was proposed to solve this problem of individual tree detection in the Robinia pseudoacacia forest based on a combination of the Unmanned Aerial Vehicle-Light Detecting and Ranging (UAV-LiDAR) with the Backpack-LiDAR. The proposed method mainly consists of following steps: (i) at a plot level, trees in the UAV-LiDAR data were detected by seed points obtained by an individual tree segmentation (ITS) method from the Backpack-LiDAR data; (ii) height and diameter at breast height (DBH) of an individual tree would be extracted from UAV and Backpack LiDAR data, respectively; (iii) the individual tree AGB would be calculated through an allometric equation and the forest AGB at the plot level was accumulated; and (iv) the plot-level forest AGB was taken as a dependent variable, and various metrics extracted from UAV-LiDAR point cloud data as independent variables to estimate forest AGB distribution in the study area by using both multiple linear regression (MLR) and random forest (RF) models. The results demonstrate that: (1) the seed points extracted from Backpack-LiDAR could significantly improve the overall accuracy of individual tree detection (F = 0.99), and thus increase the forest AGB estimation accuracy; (2) compared with MLR model, the RF model led to a higher estimation accuracy (p < 0.05); and (3) LiDAR intensity information selected by both MLR and RF models and laser penetration rate (LP) played an important role in estimating healthy forest AGB. 相似文献
14.
Estimating forest biomass using small footprint LiDAR data: An individual tree-based approach that incorporates training data 总被引：1，自引：0，他引：1
Zachary J. Bortolot Randolph H. Wynne 《ISPRS Journal of Photogrammetry and Remote Sensing》2005,59(6):824
A new individual tree-based algorithm for determining forest biomass using small footprint LiDAR data was developed and tested. This algorithm combines computer vision and optimization techniques to become the first training data-based algorithm specifically designed for processing forest LiDAR data. The computer vision portion of the algorithm uses generic properties of trees in small footprint LiDAR canopy height models (CHMs) to locate trees and find their crown boundaries and heights. The ways in which these generic properties are used for a specific scene and image type is dependent on 11 parameters, nine of which are set using training data and the Nelder–Mead simplex optimization procedure. Training data consist of small sections of the LiDAR data and corresponding ground data. After training, the biomass present in areas without ground measurements is determined by developing a regression equation between properties derived from the LiDAR data of the training stands and biomass, and then applying the equation to the new areas. A first test of this technique was performed using 25 plots (radius = 15 m) in a loblolly pine plantation in central Virginia, USA (37.42N, 78.68W) that was not intensively managed, together with corresponding data from a LiDAR canopy height model (resolution = 0.5 m). Results show correlations (r) between actual and predicted aboveground biomass ranging between 0.59 and 0.82, and RMSEs between 13.6 and 140.4 t/ha depending on the selection of training and testing plots, and the minimum diameter at breast height (7 or 10 cm) of trees included in the biomass estimate. Correlations between LiDAR-derived plot density estimates were low (0.22 ≤ r ≤ 0.56) but generally significant (at a 95% confidence level in most cases, based on a one tailed test), suggesting that the program is able to properly identify trees. Based on the results it is concluded that the validation of the first training data-based algorithm for determining forest biomass using small footprint LiDAR data was a success, and future refinement and testing are merited. 相似文献
15.
激光雷达森林参数反演研究进展 总被引：6，自引：0，他引：6
激光雷达通过发射激光能量和接收返回信号的方式,来获取高精度的森林空间结构和林下地形信息。全波形激光雷达通过记录返回信号的全部能量,得到亚米级植被垂直剖面;离散回波激光雷达记录的单个或多个回波,表示来自不同冠层的回波信号。星载激光雷达一般采用全波形或光子计数激光剖面系统,仅能获取卫星轨道下方的单波束或多波束数据,用于区域/全球范围的森林垂直结构及变化观测。机载激光雷达多采用离散回波或全波形激光扫描系统,能够获取飞行轨迹下方特定视场范围内的扫描数据,用于林分/区域范围的森林结构观测。地基激光雷达多采用离散回波激光扫描系统,获取以测站为中心的球形空间内扫描数据,用于单木/样地范围的森林结构观测。激光雷达单木因子估测方法可分为CHM单木法、NPC单木法和体元单木法3类。CHM单木法通过局部最大值识别树冠顶点,采用区域生长或图像分割算法识别树冠边界或树冠主方向,NPC单木法一般通过空间聚类或形态学算法识别单木,体元单木法在3维体元空间采用区域生长或空间聚类算法识别树冠。根据激光雷达冠层高度分布可以估测林分因子,冠层高度分布特征来自于离散点云或全波形。多时相激光雷达可用于森林生长量、生物量变化等监测,以及森林采伐、灾害等引起的结构变化监测。随着激光雷达技术的发展,它将在森林调查、生态环境建模等生产与科学研究领域中得到更为广泛的应用。 相似文献
16.
Research presented here explores the feasibility of leveraging vegetation data derived from airborne light detection and ranging (LiDAR) and terrestrial laser scanning (TLS) for visibility modeling. Using LiDAR and TLS datasets of a lodgepole pine (Pinus contorta) dominant ecosystem, tree canopy and trunk obstructions were isolated relevant to a discrete visibility beam in a short‐range line‐of‐sight model. Cumulative obstruction factors from vegetation were compared with reference visibility values from digital photographs along sightline paths. LiDAR‐derived tree factors were augmented with single‐scan TLS data for obstruction prediction. Good correlation between datasets was found up to 10 m from the terrestrial scanner, but fine scale visibility modeling was problematic at longer distances. Analysis of correlation and regression results reveal the influence of obstruction shadowing inherent to discrete LiDAR and TLS, potentially limiting the feasibility of modeling visibility over large areas with similar technology. However, the results support the potential for TLS‐derived subcanopy metrics for augmenting large amounts of aerial LiDAR data to significantly improve models of forest structure. Subtle LiDAR processing improvements, including more accurate tree delineation through higher point density aerial data, combined with better vegetation quantification processes for TLS data, will advance the feasibility and accuracy of data integration. 相似文献
17.
结合机载LiDAR数据,提出了一种改进的GLAS光斑点冠层高度地形校正模型,以校正后的GLAS光斑点作为输入样本,结合MODIS遥感影像,利用支持向量回归（SVR）的方法对研究区森林冠层高度进行分生态区估测,并利用野外调查数据和机载LiDAR冠层高度结果对估测结果进行验证。结果显示:研究区的坡度等级直接影响GLAS光斑点森林冠层高度估测精度,改进的地形校正模型可以较好的减小坡度对GLAS光斑点森林冠层高度估测的影响,模型精度RMSE稳定在3.25~3.48 m;不同生态分区的SVR模型估测精度较为稳定,其RMSE=6.41~7.56 m;与算数平均高相比,样地的Lorey's高与制图结果拟合最好,不同生态分区平均估测精度为80.3%。机载LiDAR冠层高度结果的验证平均精度为79.5%,和Lorey's高验证结果呈现较好的一致性。 相似文献
18.
Forest canopy height is an important indicator of forest carbon storage, productivity, and biodiversity. The present study showed the first attempt to develop a machine-learning workflow to map the spatial pattern of the forest canopy height in a mountainous region in the northeast China by coupling the recently available canopy height (Hcanopy) footprint product from ICESat-2 with the Sentinel-1 and Sentinel-2 satellite data. The ICESat-2 Hcanopy was initially validated by the high-resolution canopy height from airborne LiDAR data at different spatial scales. Performance comparisons were conducted between two machine-learning models – deep learning (DL) model and random forest (RF) model, and between the Sentinel and Landsat-8 satellites. Results showed that the ICESat-2 Hcanopy showed the highest correlation with the airborne LiDAR canopy height at a spatial scale of 250 m with a Pearson’s correlation coefficient (R) of 0.82 and a mean bias of -1.46 m, providing important evidence on the reliability of the ICESat-2 vegetation height product from the case in China’s forest. Both DL and RF models obtained satisfactory accuracy on the upscaling of ICESat-2 Hcanopy assisted by Sentinel satellite co-variables with an R-value between the observed and predicted Hcanopy equalling 0.78 and 0.68, respectively. Compared to Sentinel satellites, Landsat-8 showed relatively weaker performance in Hcanopy prediction, suggesting that the addition of the backscattering coefficients from Sentinel-1 and the red-edge related variables from Sentinel-2 could positively contribute to the prediction of forest canopy height. To our knowledge, few studies have demonstrated large-scale vegetation height mapping in a resolution ≤ 250 m based on the newly available satellites (ICESat-2, Sentinel-1 and Sentinel-2) and DL regression model, particularly in the forest areas in China. Thus, the present work provided a timely and important supplementary to the applications of these new earth observation tools. 相似文献
19.
Quantitative estimates of forest vertical and spatial distribution using remote sensing technology play an important role in better understanding forest ecosystem function, forest carbon storage and the global carbon cycle. Although most remote sensing systems can provide horizontal distribution of canopies, information concerning the vertical distribution of canopies cannot be detected. Fortunately, laser radars have become available, such as GLAS (Geoscience laser altimeter system). Because laser radar can penetrate foliage, it is superior to other remote sensing technologies for detecting vertical forest structure and has higher accuracy. GLAS waveform data were used in this study to retrieve average tree height and biomass in a GLAS footprint area in Heilongjiang Province. However, GLAS data are not spatially continuous. To fill the gaps, MISR (multi- angle imaging spectrometer) spectral radiance was chosen to predict the regional continuous tree height by developing a multivariate linear regression model. We compared tree height estimated by the regression model and GLAS data. The results confirmed that estimates of tree height and biomass based on GLAS data are considerably more accurate than estimates based on traditional methods. The accuracy is approximately 90%. MISR can be used to estimate tree height in continuous areas with a robust regression model. The R2, precision and root mean square error of the regression model were 0.8, 83% and 1 m, respectively. This study provides an important reference for mapping forest vertical parameters. 相似文献
20.
Forest canopy cover (CC) and above-ground biomass (AGB) are important ecological indicators for forest monitoring and geoscience applications. This study aimed to estimate temperate forest CC and AGB by integrating airborne LiDAR data with wall-to-wall space-borne SPOT-6 data through geostatistical modeling. Our study involved the following approach: (1) reference maps of CC and AGB were derived from wall-to-wall LiDAR data and calibrated by field measurements; (2) twelve discrete LiDAR flights were simulated by assuming that LiDAR data were only available beneath these flights; (3) training/testing samples of CC and AGB were extracted from the reference maps inside and outside the simulated flights using stratified random sampling; (4) The simple linear regression, ordinary kriging and regression kriging model were used to extend the sparsely sampled CC/AGB data to the entire study area by incorporating a selection of SPOT-6 variables, including vegetation indices and texture variables. The regression kriging model was superior at estimating and mapping the spatial distribution of CC and AGB, as it featured the lowest mean absolute error (MAE; 11.295% and 18.929 t/ha for CC and AGB, respectively) and root mean squared error (RMSE; 17.361% and 21.351 t/ha for CC and AGB, respectively). The predicted and reference values of both CC and AGB were highly correlated for the entire study area based on the estimation histograms and error maps. Finally, we concluded that the regression kriging model was superior and more effective at estimating LiDAR-derived CC and AGB values using the spatially-reduced samples and the SPOT-6 variables. The presented modeling workflow will greatly facilitate future forest growth monitoring and carbon stock assessments for large areas of temperate forest in northeast China. It also provides guidance on how to take full advantage of future sparsely collected LiDAR data in cases where wall-to-wall LiDAR coverage is not available from the perspective of geostatistics. 相似文献