共查询到20条相似文献，搜索用时 31 毫秒
1.
Hydrodynamic interactions between two ships advancing in waves 总被引：3，自引：0，他引：3
In this paper the hydrodynamic problems between two moving ships in waves are analyzed using a three-dimensional potential-flow theory based on the source distribution technique. The potential is presented by a distribution of source over the ship hull. The corresponding Green functions and their derivatives can be easily solved numerically by using the series expansions of Telste and Noblesse's algorithm for the Cauchy principal value integral of unsteady flow. The numerical solution is evaluated by applying the present method to two pairs of models and compared with experimental data and strip theory. From the comparisons, it shows that the hydrodynamic interactions are generally important. In the resonance region, the hydrodynamic interaction calculated by the 3D method is more reasonable, which is not so significant as that by the 2D method. The technique developed here may serve as a more rigorous tool to analyze the related problems of two ships doing underway replenishment in waves. 相似文献
2.
The coupling and interactions between ship motion and inner-tank sloshing are investigated by a time-domain simulation scheme. For the time-domain simulation, the hydrodynamic coefficients and wave forces are obtained by a potential-thoery-based three-dimensional (3D) diffraction/radiation panel program in frequency domain. Then, the corresponding simulations of motions in time domain are carried out using convolution integral. The liquid sloshing in a tank is simulated in time domain by a Navier–Stokes solver. A finite difference method with SURF scheme is applied for the direct simulation of liquid sloshing. The computed sloshing force and moment are then applied as external excitations to the ship motion. The calculated ship motion is in turn inputted as the excitation for liquid sloshing, which is repeated for the ensuing time steps. For comparison, we independently developed a coupling scheme in the frequency domain using a sloshing code based on the linear potential theory. The hydrodynamic coefficients of the inner tanks are also obtained by a 3D panel program. The developed schemes are applied to a barge-type FPSO hull equipped with two partially filled tanks. The time-domain simulation results show similar trend when compared with MARIN's experimental results. The most pronounced coupling effects are the shift or split of peak-motion frequencies. It is also found that the pattern of coupling effects between vessel motion and liquid sloshing appreciably changes with filling level. The independent frequency-domain coupled analysis also shows the observed phenomena. 相似文献
3.
A general formulation is given of the hydrodynamic forces on a ship, oscillating about a state of rest in 6df in response to excitation by a harmonic wave in shallow water. A method is described to obtain a numerical approximation of the velocity potential, describing the flow around the moving ship by means of a distribution of discrete three-dimensional sources.With this method it is possible to take the influence of a quay into account.Calculated values of wave excited forces, hydrodynamic coefficients and motions of a 200,000 tdw tanker in shallow water are presented and compared with experimental results. 相似文献
4.
Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields. 相似文献
5.
6.
J.A. Pinkster 《Ocean Engineering》1979,6(6):593-615
A recently developed method, based on three-dimensional potential theory, to compute the mean wave drifting forces on a free floating structure in regular waves, is extended to include low frequency oscillatory components which arise when the structure is floating in regular wave groups consisting of two regular waves with small difference frequency. This completes the information necessary for the determination of the wave drifting forces under arbitrary irregular wave conditions.In regular wave groups the drifting forces not only depend on the first order velocity potential and the first body motions, but also on the wave exciting forces due to the low frequency part of the second order potential. For the general three-dimensional case the latter contribution can only be determined numerically and at the expense of long computation times. Since this contribution is generally not large compared to components which may be determined using linear potential theory it is included using a simple approximation. Results of the method of approximation are compared with some two-dimensional cases for which exact solutions are known.Results of computations of the total mean and low frequency surge forces on a rectangular barge and a column stabilized semi-submersible platform are presented. For both structures, the computed mean surge drifting forces in regular head waves are compared with results of model tests.The computed components of the total mean drifting forces are presented. It appears that for both the barge and the semi-submersible the same components are of importance.For the semi-submersible, the computed low frequency second order surge forces in head waves are compared with results obtained from a test in irregular head waves using cross-bispectral analysis methods. 相似文献
7.
In this paper,the effects of a quay or a solid jetty on hydrodynamic coefficients and vertical wave excitation forces on a ship woth or without forward speed are discussed.A modified simple Green function technique is used to calculate the 2D coefficients while the strip theory is used to calculate the 3D coefficients. Wave excitation forces are also calculated with the strip theory. Numerical results are provided for hydrodynamic coefficients and vertical wave excitation forces on a 200000 DWT tanker ship. It is found that the quay has a considerable effect on the hydrodynamic coefficients and wave excitation forces for a ship. 相似文献
8.
Second-order springing on an elastic body with forward speed is analyzed by numerical simulations. The boundary-value problem for the velocity potential is solved by means of the direct time-domain higher-order boundary element method (HOBEM). The free-surface boundary condition in the boundary-value problem is approximated on the mean surface up to second order by use of perturbation and Taylor-series expansion methods. The body boundary condition for an elastic body is derived with various quantities which are redefined in the generalized mode. These variables such as mode shape, normal vector, etc. are obtained by using directional derivative and continuum mechanics, and the same mathematical expressions are used to obtain several second-order generalized forces. To validate the numerical results, the second-order hydrodynamic force on the bottom-mounted rigid/elastic cylinders without forward speed is compared with other semi-analytic results. The property of second-order forces on an elastic ship is studied by changing the flexural rigidity and forward speed with elastic response. It is confirmed that the second-order velocity potential is important for a body with forward speed and investigation should be made more on numerical methods for accurate computation of the second-order velocity-potential force with forward speed. 相似文献
9.
《中国海洋工程》2020,(4)
The study of mooring forces is an important issue in marine engineering and offshore structures. Although being widely applied in mooring system, numerical simulations suffer from difficulties in their multivariate and nonlinear modeling. Data-driven model is employed in this paper to predict the mooring forces in different lines, which is a new attempt to study the mooring forces. The height and period of regular wave, length of berth, ship load, draft and rolling period are considered as potential influencing factors. Input variables are determined using mutual information(MI) and principal component analysis(PCA), and imported to an artificial neural network(NN) model for prediction. With study case of 200 and 300 thousand tons ships experimental data obtained in Dalian University of Technology, MI is found to be more appropriate to provide effective input variables than PCA. Although the three factors regarding ship characteristics are highly correlated, it is recommended to input all of them to the NN model.The accuracy of predicting aft spring line force attains as high as 91.2%. The present paper demonstrates the feasibility of MI-NN model in mapping the mooring forces and their influencing factors. 相似文献
10.
Accurate prediction of hydrodynamic forces on offshore structures is critical for safe and cost effective design of fixed and floating offshore structures exposed to a harsh environment. In the present paper, nonlinear interactions between regular waves and a single surface-piercing truncated circular column have been investigated using a frequency domain potential flow solver (DIFFRACT) and a full CFD solver in OpenFOAM for direct comparisons. Both the predicted free surface elevation around the column and the total force acting on the column have been analysed and compared with experimental data from MOERI. The degree of non-linearity and the contribution of each harmonic to the free surface run-up and wave forces have been examined, and evaluations of the accuracy and computational efficiency of the potential flow solver and the full CFD solver are provided and compared in the paper. Also of note are the local forms of the scattered waves around the column in numerical simulations, which are consistent with the Type-1 and Type-2 patterns identified in physical experiments at Imperial College. 相似文献
11.
C.Z. Wang 《Ocean Engineering》2010,37(4):400-417
Fully nonlinear interactions between water waves and vertical cylinder arrays in a numerical tank are studied based on a finite element method (FEM). The three-dimensional (3D) mesh is constructed through an extension of a 2D Delaunay surface grid along the vertical line. The velocity potential is obtained by solving a linear matrix system of FEM, and a difference scheme is then used to calculate the velocity on the free surface to track its movement. Waves and hydrodynamic forces are obtained for both bottom mounted and truncated cylinders. The simulations have provided many results to show the nature of mutual interference between cylinders in arrays and its effects on waves and forces at the nearly trapped mode frequency. The effect of the tank wall on waves and forces has been investigated, and the nonlinear features of waves and forces have also been discussed. 相似文献
12.
13.
System identification provides an effective way to predict the ship manoeuvrability. In this paper several measures are proposed to diminish the parameter drift in the parametric identification of ship manoeuvring models. The drift of linear hydrodynamic coefficients can be accounted for from the point of view of dynamic cancellation, while the drift of nonlinear hydrodynamic coefficients is explained from the point of view of regression analysis. To diminish the parameter drift, reconstruction of the samples and modification of the mathematical model of ship manoeuvring motion are carried out. Difference method and the method of additional excitation are proposed to reconstruct the samples. Using correlation analysis, the structure of a manoeuvring model is simplified. Combined with the measures proposed, support vector machines based identification is employed to determine the hydrodynamic coefficients in a modified Abkowitz model. Experimental data from the free-running model tests of a KVLCC2 ship are analyzed and the hydrodynamic coefficients are identified. Based on the regressive model, simulation of manoeuvres is conducted. Comparison between the simulation results and the experimental results demonstrates the validity of the proposed measures. 相似文献
14.
The paper presents a comparison between experimental data and numerical results of the hydrodynamic coefficients and also of the wave induced motions and loads on a fast monohull model. The model with 4.52 m length was constructed in Fibre Reinforced Plastic (FRP), and made up of 4 segments connected by a backbone in order to measure sectional loads. The objective of the investigation was to assess the capability of a nonlinear time domain strip method to represent the nonlinear and also the forward speed effects on a displacement high speed vessel advancing in large amplitude waves. With this objective in mind the experimental program included forced oscillation tests in heaving and pitching, for a range of periods, three different amplitudes and several speeds of advance. In head regular waves comprehensive ranges of wave periods, wave steepness and speeds, were tested in order to measure heave, pitch and loads in three cross sections.
The numerical method assumes that the radiation and diffraction hydrodynamic forces are linear and the nonlinear contributions arise from the hydrostatics and Froude–Krilov forces and the effects of green water on deck. The assumption of linearity of the radiation forces is validated by comparing calculated hydrodynamic coefficients with experimental data for three different amplitudes of the forced oscillations. Both global coefficients and sectional coefficients are compared. The motions and loads in waves are compared in terms of first and higher harmonic amplitudes and also in terms of sagging and hogging peaks. 相似文献
15.
Results of experimental study of aerodynamic forces acting on two ship models are presented and discussed in this paper. Measurements have been performed in a wind tunnel utilizing floating LNG platform and LNG carrier models. Tests were carried out for different cases of the position and location of the models, starting from testing single models at full range of flow attack angles and finishing with investigation of interaction effects between two vessels in wind condition. Results are presented in the graphical form of the plots for the surge and sway force and yaw moment coefficients and compared with some other experimental data and estimates obtained with the help of a generic approximate method. 相似文献
16.
For the non-negligible roll-coupling effect on ship maneuvering motion, a system-based method is used to investigate 4-DOF ship maneuvering motion in calm water for the ONR tumblehome model. A 4-DOF MMG model is employed to describe ship maneuvering motion including surge, sway, roll, and yaw. Simulations of circular motion test, static drift and heel tests are performed by solving the Reynolds-averaged Navier-Stokes (RANS) equations, after a convergence study quantifying the necessary grid spacing and time step to resolve the flow field adequately. The local flow field is analyzed for the selected cases, and the global hydrodynamic forces acting on the ship model are compared with the available experiment data. Hydrodynamic derivatives relating to sway velocity, yaw rate, and heel angle are computed from the computed force/moment data using least square method, showing good agreement with those obtained from EFD data overall. In order to investigate further the validity of these derivatives, turning circle and zigzag tests are simulated by using the 4-DOF MMG model with these derivatives. The trajectories and the time histories of the kinematic variables show satisfactory agreement with the data of free-running model tests, indicating that the system-based method coupled with CFD simulation has promising capability to predict the 4-DOF ship maneuvering motion for the unconventional vessel. 相似文献
17.
Fully nonlinear wave-body interactions for stationary surface-piercing single and double bodies are studied by a potential-theory-based fully nonlinear 2D numerical wave tank (NWT). The NWT was developed in time domain by using boundary element method (BEM) with constant panels. MEL free surface treatment and Runge–Kutta fourth-order time integration with smoothing scheme was used for free-surface time simulation. The acceleration-potential scheme is employed to obtain accurate time derivative of velocity potential. Using the steady part of nonlinear force time histories, mean and a series of higher-harmonic force components are calculated and compared with the experimental and numerical results of other researchers. The slow-decaying second-harmonic vertical forces are investigated with particle velocities and corresponding body pressure. Typical patterns of two-body interactions, shielding effect, and the pumping/sloshing modes of water column in various gap distances are investigated. The pumping mode in low frequencies is demonstrated by the comparison of velocity magnitudes. 相似文献
18.
Modification of ship hydrodynamic interaction forces and moment by underwater ship geometry 总被引：1，自引：0，他引：1
The hydrodynamic interaction forces/moments acting on a moored ship due to the passage of another ship in its proximity is researched by considering the influence of ship form against the idealized approach of the use of parabolic sectional area distribution. Comparisons with experimental results show that the interaction effects are predicted better by inclusion of ship's form. 相似文献
19.
S. Sutulo 《Ocean Engineering》2010,37(10):947-958
The method of boundary integral equation developed by the authors was applied for computing inertial and damping characteristics of ship sections for the cases of multi-stepped and inclined bottoms. Comparative calculations for three typical ship hull sections were performed and analyzed. The frequency-dependent data computed for these ship sections can be used to assess the bottom geometry's influence onto the ship motions in waves by means of the strip theory. Limiting values of the same characteristics corresponding to the close-to-zero frequency can also be used for estimation of hydrodynamic forces in manoeuvring over shallow and confined waterways. 相似文献
20.
Huang Guoliang Liu Tianwei Yan Naichang
Associate Professor Shanghai Jiao Tong University Shanghai
Engineer Shanghai Jiao Tong University Shanghai .
Professor Shanghai Jiao Tong University Shanghai 《中国海洋工程》1997,(4)
In this paper,the maneuvering characteristics of a low speed submersible are investigated.First,the captive model tests are carried out to obtain the hydrodynamic forces acting on the submersibleusing a Planar Motion Mechanism(PMM).For the hydrodynamic forces within a wide range of attack an-gles,the hydrodynamic coefficients which are usually used in the conventional maneuvering motion arequite difficult to be applied.In this case,a Fourier series is adopted to represent the hydrodynamic forcesand it fits the experimental data well.Then,based on the experimental results the simulation calculationsare made to predict some of the maneuvering performance of the low speed submersible. 相似文献