首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Rates of shallow slip on creeping sections of the San Andreas fault have been perturbed on a number of occasions by earthquakes occurring on nearby faults. One example of such perturbations occurred during the 26 January 1986 magnitude 5.3 Tres Pinos earthquake located about 10 km southeast of Hollister, California. Seven creepmeters on the San Andreas fault showed creep steps either during or soon after the shock. Both left-lateral (LL) and right-lateral (RL) steps were observed. A rectangular dislocation in an elastic half-space was used to model the coseismic fault offset at the hypocenter. For a model based on the preliminary focal mechanism, the predicted changes in static shear stress on the plane of the San Andreas fault agreed in sense (LL or RL) with the observed slip directions at all seven meters; for a model based on a refined focal mechanism, six of the seven meters showed the correct sense of motion. Two possible explanations for such coseismic and postseismic steps are (1) that slip was triggered by the earthquake shaking or (2) that slip occurred in response to the changes in static stress fields accompanying the earthquake. In the Tres Pinos example, the observed steps may have been of both the triggered and responsive kinds. A second example is provided by the 2 May 1983 magnitude 6.7 Coalinga earthquake, which profoundly altered slip rates at five creepmeters on the San Andreas fault for a period of months to years. The XMM1 meter 9 km northwest of Parkfield, California recorded LL creep for more than a year after the event. To simulate the temporal behavior of the XMM1 meter and to view the stress perturbation provided by the Coalinga earthquake in the context of steady-state deformation on the San Andreas fault, a simple time-evolving dislocation model was constructed. The model was driven by a single long vertical dislocation below 15 km in depth, that was forced to slip at 35 mm/yr in a RL sense. A dislocation element placed in the seismogenic layer under XMM1 was given a finite breaking strength of sufficient magnitude to produce a Parkfield-like earthquake every 22 years. When stress changes equivalent to a Coalinga earthquake were superposed on the model running in a steady state mode, the effect was to make a segment under XMM1, that could slip in a linear viscous fashion, creep LL and to delay the onset of the next Parkfield-like earthquake by a year or more. If static stress changes imposed by earthquakes off the San Andreas can indeed advance or delay earthquakes on the San Andreas by months or years, then such changes must be considered in intermediate-term prediction efforts.  相似文献   

2.
Radon anomalies on three kinds of faults in California   总被引：1，自引：0，他引：1  
Radon emanation is known to be anomalously high along active faults in many parts of the world. We tested this relationship in California during July and early August 1992, using a portable radonmeter to conduct soil-air radon surveys at 5 sites across three kinds of faults: Creeping, locked, and freshly broken.Along a 350-m long survey line across a creeping segment of the San Andreas fault at Nyland Ranch in San Juan Bautista, we found anomalous radon concentrations not in the creep zone itself as determined by a creepmeter, but on the adjacent sides, 10 and 30 meters from the center line of the fault. The anomalous values were 5 times higher than the background values measured farther away from the fault. A similar radon anomaly was observed along a 420-m long survey line across a creeping segment of the Calaveras fault near 7th Street in Hollister. There, the anomalous values were about 6 to 11 times the background values and about 40 and 50 m from the center line of the fault. The double-peaked featire of the anomalies may be indicative of a relatively low gas permeability of the fault-gouge materials in the creeping zones and high permeability of fractured rocks in the adjacent shear zones.Along a 144-m survey line across the currently locked segment of the San Andreas fault at the Earthquake Trail near Olema, the radon concentration was indeed anomalously high in the fault zone, by a factor of two above background values. However, the maximum values (3 to 6 times background) again were recorded about 10 meters from the center line.Three weeks after the magnitude 7.5 Landers earthquake of 28 June 1992, we conducted a survey along a 300-m line across the earthquake fault alongside Encantado Road in the epicenter area. The radon values measured at the two main fault breaks were an order of magnitude higher than the background values. A similar result was found along a 420-m line alongside Reche Road about 1.7 km south of Encantado Road.  相似文献   

3.
Records of shallow aseismic slip (fault creep) obtained along parts of the San Andreas and Calaveras faults in central California demonstrate that significant changes in creep rates often have been associated with local moderate earthquakes. An immediate postearthquake increase followed by gradual, long-term decay back to a previous background rate is generally the most obvious earthquake effect on fault creep. This phenomenon, identified as aseismic afterslip, usually is characterized by above-average creep rates for several months to a few years. In several cases, minor step-like movements, called coseismic slip events, have occurred at or near the times of mainshocks. One extreme case of coseismic slip, recorded at Cienega Winery on the San Andreas fault 17.5 km southeast of San Juan Bautista, consisted of 11 mm of sudden displacement coincident with earthquakes ofM L =5.3 andM L =5.2 that occurred 2.5 minutes apart on 9 April 1961. At least one of these shocks originated on the main fault beneath the winery. Creep activity subsequently stopped at the winery for 19 months, then gradually returned to a nearly steady rate slightly below the previous long-term average.The phenomena mentioned above can be explained in terms of simple models consisting of relatively weak material along shallow reaches of the fault responding to changes in load imposed by sudden slip within the underlying seismogenic zone. In addition to coseismic slip and afterslip phenomena, however, pre-earthquakeretardations in creep rates also have been observed. Onsets of significant, persistent decreases in creep rates have occurred at several sites 12 months or more before the times of moderate earthquakes. A 44-month retardation before the 1979M L =5.9 Coyote Lake earthquake on the Calaveras fault was recorded at the Shore Road creepmeter site 10 km northwest of Hollister. Creep retardation on the San Andreas fault near San Juan Bautista has been evident in records from one creepmeter site for the past 5 years. Retardations with durations of 21 and 19 months also occurred at Shore Road before the 1974 and 1984 earthquakes ofM L =5.2 andM L =6.2, respectively.Although creep retardation remains poorly understood, several possible explanations have been discussed previously. (1) Certain onsets of apparent creep retardation may be explained as abrupt terminations of afterslip generated from previous moderate-mainshock sequences. (2) Retardations may be related to significant decreases in the rate of seismic and/or aseismic slip occurring within or beneath the underlying seismogenic zone. Such decreases may be caused by changes in local conditions related to growth of asperities, strain hardening, or dilatancy, or perhaps by passage of stress-waves or other fluctuations in driving stresses. (3) Finally, creep rates may be lowered (or increased) by stresses imposed on the fault by seismic or aseismic slip on neighboring faults. In addition to causing creep-rate increases or retardations, such fault interactions occasionally may trigger earthquakes.Regardless of the actual mechanisms involved and the current lack of understanding of creep retardation, it appears that shallow fault creep is sensitive to local and regional effects that promote or accompany intermediate-term preparation stages leading to moderate earthquakes. A strategy for more complete monitoring of fault creep, wherever it is known to occur, therefore should be assigned a higher priority in our continuing efforts to test various hypotheses concerning the mechanical relations between seismic and aseismic slip.  相似文献   

4.
Normal faults within the Ptolemais coal field and large seismogenic faults in the northwestern Aegean remain fractal for displacement values larger than about 1m. The kinematic parameters on reverse drag profiles such as length of rollover, footwall uplift and wavelength of footwall uplift show that all three parameters have a power law relationship, expressed by a c exponent of about 1, with the maximum displacement which take place across the fault. Footwall uplift/hanging wall subsidence ratio is about 1/2.The displacement analysis help us to propose a growth model for larger seismogenic faults in the NW Aegean, as is the ‘Hepiros fault set’ and the ‘Aliakmon fault zone’. Faults within the ‘Aliakmon fault zone’ were independently developed, at the first stages of deformation, by tip line deformation and out-of plane bifurcation, whereas later, deformation continued by segment linkage. One of these faults the ‘Sarakina fault’ was reactivated during the 1995 earthquake to produce a 25 km long surface rupture. A long term slip rate of about 0.3 mm a−1 has been estimated by taking into consideration that over the past 6 Ma a maximum displacement of 1700 m across this fault has taken place.  相似文献   

5.
We show that geodetic data from the Bay Area Regional Deformation (BARD) network indicate asymmetric motion across the San Andreas fault in the San Francisco Bay Area (SFBA), resulting from a strong contrast in rigidity across the fault, as determined previously from seismological data. Assuming asymmetric motion across the fault, we determine the location and size of the maximum strain rate in the region. We find that, compared to the determination using a symmetric model of deformation, it is shifted eastward and its value increases from ～0.4 μstrain/yr to ～0.65 μstrain/yr. Such strain rate amplitudes are consistent with previous geodetic slip rate estimates. We confirm that the geological units located east of SAF are entrained by the motion of the Pacific Plate and that the San Andreas fault (SAF) is the real rheological limit between the Pacific and North-American Plates. The asymmetry of rheology constrained in this study implies the strain rate maximum in SFBA is likely located between SAF and the Hayward fault system. This also has implications for hazards in the northern SFBA, in particular on the Rodgers creek fault.  相似文献   

6.
Three forms of fault are recognized in Entrada and Navajo Sandstones in the San Rafael Desert, southeastern Utah; deformation bands, zones of deformation bands, and slip surfaces. Small faults occur asdeformation bands, about one millimeter thick, in which pores collapse and sand grains fracture, and along which there are shear displacements on the order of a few millimeters or centimeters. Two or more deformation bands adjacent to each other, which share the same average strike and dip, form azone of deformation bands. A zone becomes thicker by addition of new bands, side by side. Displacement across a zone is the sum of displacements on each individual band. The thickest zones are about 0.5 m and total displacement across a thick zone rarely exceeds 30 cm. Finally,slip surfaces, which are through-going surfaces of discontinuity in displacement, form at either edge of zones of highly concentrated deformation bands. In contrast with individual deformation bands and zones of deformation bands, slip surfaces accommodate large displacements, on the order of several meters in the San Rafael Desert.The sequence of development is from individual deformation bands, to zones, to slip surfaces, and each type of faulting apparently is controlled by somewhat different processes. The formation of zones apparently involves strain hardening, whereas the formation of slip surfaces probably involves strain softening of crushed sandstone.  相似文献   

7.
On 12 May 2008, the devastating Wenchuan earthquake struck the Longmenshan fault zone, which comprised the eastern margin of the Tibetan Plateau, and this fault zone was predominantly a convergent boundary with a right-lateral strike-slip component. After such a large-magnitude earthquake, it was crucial to analyze the influences of the earthquake on the surrounding faults and the potential seismic activity. In this paper, a complex viscoelastic model of western Sichuan and eastern Tibet regions was constructed including the topography. Based on the findings of co-seismic static slip distribution, we calculated the stress change caused by the Wenchuan earthquake with the post-seismic relaxation into consideration. Our preliminary results indicated that: (1) The tectonic stressing rate was relatively high in Kunlun mountain pass-Jiangcuo, Ganzi-Yushu, Xianshuihe and Zemuhe faults; while in the east Kunlun and Longriba was medium; also the value was less in the Minjiang, Longmenshan, Anninghe and Huya faults. As to the Longmenshan fault, the value was 0.28×10-3 MPa/a to 0.35×10-3 MPa/a, which is coincident with the previous long recurrence interval of Wenchuan earthquake; (2) The Wenchuan earthquake not only caused the Coulomb stress decrease in the source region, but also the stress increase in the two terminals, especially the northeastern segment, which is comparatively consistent with the aftershock distribution. Meanwhile, the high concentration areas of the static slip distribution were corresponding to the Coulomb stress reductions; (3) The Coulomb stress change caused by Wenchuan earthquake showed significant increase on five major faults, which were northwestern segment of Xianshuihe fault, eastern Kunlun fault, Longriba fault, Minjiang fault and Huya fault respectively; also the Coulomb stress on the fault plane of the Yushu earthquake was faintly increased; (4) We defined the recurrence interval as the time needed to accumulate the magnitude of the stress drop, and the recurrence interval of Wenchuan earthquake was estimated about 1 714 a to 2 143 a correspondingly.  相似文献   

8.
帕米尔高原位于地中海－喜马拉雅地震带上,晚新生代以来随着印度板块向欧亚板块持续不断地挤压汇聚,其构造运动是欧亚大陆最强烈的地区。高原腹地发育一系列近SN向正断层,包括近SN向的塔什库尔干正断层所处的帕米尔中部现代区域的构造应力场以EW向水平拉张为主。2016年11月25日发生的阿克陶MS 6.7级地震的发震构造为塔什库尔干断层分支的NWW向木吉盆地北缘断层,其具有右旋走滑兼正断性质。地震在震中附近产生同震地表形变带,全长约1km,呈近SN－NNE向水平拉伸,发育近EW—NWW向的张裂缝,为地震破裂的产物,张裂缝的最大水平拉伸位移量和最大垂直位移量分别为46cm和16cm。地表破裂带中的NE和NW向张剪裂缝只是连接贯通这些雁列的张裂缝,其水平相对位移量取决于张裂缝的水平拉伸量和张裂缝之间的几何关系。地表形变带表现的拉张性质与帕米尔高原腹地区域现代应力场最大主压应力为垂直向基本一致,可能与深部热物质上涌造成的上地壳拉伸有关。而地表形变带呈近SN向水平拉张,与区域近EW向拉张应力场之间存在显著差异,这可能是木吉盆地北缘右旋走滑正断层阶区局部应力场调整的结果。  相似文献   

9.
ＭｅａｓｕｒｅｍｅｎｔｏｆｒａｄｏｎｇａｓｏｎｍａｊｏｒｆａｕｌｔｓｉｎＣａｌｉｆｏｒｎｉａ，ＵＳＡＷｅｉＺＨＡＮＧ（张炜）ａｎｄＣｈｉ－ＹｕＫＩＮＧ（金继宇）（ＣｅｎｔｅｒｆｏｒＡｎａｌｙｓｉｓａｎｄＰｒｅｄｉｃｔｉｏｎ，ＳｔａｔｅＳｅｓｉｍｏｌｏ...  相似文献   

10.
The locked section of the San Andreas fault in southern California has experienced a number of large and great earthquakes in the past, and thus is expected to have more in the future. To estimate the location, time, and slip of the next few earthquakes, an earthquake instability model is formulated. The model is similar to one recently developed for moderate earthquakes on the San Andreas fault near Parkfield, California. In both models, unstable faulting (the earthquake analog) is caused by failure of all or part of a patch of brittle, strain-softening fault zone. In the present model the patch extends downward from the ground surface to about 12 km depth, and extends 500 km along strike from Parkfield to the Salton Sea. The variation of patch strength along strike is adjusted by trial until the computed sequence of instabilities matches the sequence of large and great earthquakes sincea.d. 1080 reported by Sieh and others. The last earthquake was theM=8.3 Ft. Tejon event in 1857. The resulting strength variation has five contiguous sections of alternately low and high strength. From north to south, the approximate locations of the sections are: (1) Parkfield to Bitterwater Valley, (2) Bitterwater Valley to Lake Hughes, (3) Lake Hughes to San Bernardino, (4) San Bernardino to Palm Springs, and (5) Palm Springs to the Salton Sea. Sections 1, 3, and 5 have strengths between 53 and 88 bars; sections 2 and 4 have strengths between 164 and 193 bars. Patch section ends and unstable rupture ends usually coincide, although one or more adjacent patch sections may fail unstably at once. The model predicts that the next sections of the fault to slip unstably will be 1, 3, and 5; the order and dates depend on the assumed length of an earthquake rupture in about 1700.  相似文献   

11.
Fourier transform infrared (FTIR) microanalysis of pseudotachylytes (i.e. friction-induced melts produced by seismic slip) from the Nojima fault (Japan) reveals that earthquakes almost instantaneously expel 99 wt.% of the wall rock CO2 content. Carbon is exsolved because it is supersaturated in the friction melts. By extrapolation to a crustal-scale fault rupture, large events such as the M7.2 Kobe earthquake (1995) may yield a total production of 1.8 to 3.4 × 103 tons CO2 within a few seconds. This extraordinary release of CO2 can cause a flash fluid pressure increase in the fault plane, and therefore enhance earthquake slip or trigger aftershocks; it may also explain the anomalous discharge of carbon monitored in nearby fault springs after large earthquakes. Because carbon saturation in silicate melts is pressure-dependent, FTIR can be used as a new tool to constrain the maximum depth of pseudotachylyte formation in exhumed faults.  相似文献   

12.
2014年8月24日,在美国加州旧金山海湾北部的纳帕地区发生了MW6.1地震.发震断层是西纳帕断裂系统中的一部分,但是该断层之前并未被足够重视.本文利用欧洲空间局最近发射成功并刚刚投入使用的Sentinel-1A卫星获取的第一对同震干涉像对(20140807-20140831),得到了该地震的地表同震形变场,结合震后24h内区域GPS同震形变资料作为约束条件,反演了纳帕地震的断层几何参数以及滑动分布.Sentinel-1A干涉结果表明,此次地震造成了明显的地面形变,视线向最大抬升和最大沉降量均达到了10cm.联合反演结果表明,该发震断层的走向为344°,倾角为80°.主要破裂以右旋走滑为主,平均倾滑角为-146.5°,最大倾滑量达到了1.1m,位于地表下约4km,存在明显的滑动亏损现象.此次地震,累计释放地震矩达1.5×1018 N·m,约合矩震级MW6.1.该结果略小于InSAR单独约束结果,可能与Sentinel-1A像对中包含的快速震后形变分量有关.  相似文献   

13.
The Wenchuan earthquake coseismic deformation field is inferred from the coseismic dislocation data based on a 3-D geometric model of the active faults in Sichuan-Yunnan region. Then the potential dislocation displacement is inverted from the deformation field in the 3-D geometric model. While the faults' slip velocities are inverted from GPS and leveling data, which can be used as the long-term slip vector. After the potential dislocation displacements are projected to long-term slip direction, we have got the influence of Wenchuan earthquake on active faults in Sichuan-Yunnan region. The results show that the northwestern segment of Longmenshan fault, the southern segments of Xianshuihe fault, Anninghe fault, Zemuhe fault, northern and southern segments of Daliangshan fault, Mabian fault got earthquake risks advanced of 305, 19, 12, 9.1 and 18, 51 years respectively in the eastern part of Sichuan and Yunnan. The Lijiang-Xiaojinhe fault, Nujiang fault, Longling-Lancang fault, Nantinghe fault and Zhongdian fault also got earthquake risks advanced in the western part of Sichuan-Yunnan region. Whereas the northwestern segment of Xianshuihe fault and Xiaojiang fault got earthquake risks reduced after the Wenchuan earthquake.  相似文献   

14.
Seismic refraction and near earthquake data of the U.S. Geological Survey for central California have been compiled into record sections along profiles and interpreted in terms of crustal structure. The profiles are located northeast of the San Andreas fault of central California and run parallel to the general structures. For the explosion seismic line through the centre of the Diablo Range, an uppermost layer (Franciscan formation) with P velocities of 3.6–5.0 km s?1 decreases in thickness towards the northwest. The lower boundaries of layers with constant velocities of 5.75 and 6.8 km s?1 are found at almost constant depths of 12 and 21 km, respectively. Between 21 and 26 km depth a well-defined low-velocity zone appears whose velocity is estimated as ～ 5.3 km s?1 with the aid of a hedgehog inversion and the calculation of amplitudes. This zone is underlain by a layer 3–5 km thick with a velocity of 7.6 km s?1. The upper-mantle velocity beneath the Moho at 29–30 km depth is 8.2 km s?1. The near earthquake profiles, located ～ 20 km southwest and parallel to the explosion seismic line, follow more or less the Hayward and Calaveras fault systems. The velocity-depth distribution derived for the earthquake data is very similar to that found beneath the Diablo Range. However, the low-velocity zone at 21–26 km depth does not seem to exist everywhere along the line. The Moho is not disturbed beneath the Calaveras, Hayward and Silver Creek faults; it rises slightly from the Diablo Range towards the southwest.  相似文献   

15.
We present new in situ observations of systematic asymmetry in the pattern of damage expressed by fault zone rocks along sections of the San Andreas, San Jacinto, and Punchbowl faults in southern California. The observed structural asymmetry has consistent manifestations at a fault core scale of millimeters to meters, a fault zone scale of meters to tens of meters and related geomorphologic features. The observed asymmetric signals are in agreement with other geological and geophysical observations of structural asymmetry in a damage zone scale of tens to hundreds of meters. In all of those scales, more damage is found on the side of the fault with faster seismic velocities at seismogenic depths. The observed correlation between the damage asymmetry and local seismic velocity structure is compatible with theoretical predictions associated with preferred propagation direction of earthquake ruptures along faults that separate different crustal blocks. The data are consistent with a preferred northwestward propagation direction for ruptures on all three faults. If our results are supported by additional observations, asymmetry of structural properties determined in field studies can be utilized to infer preferred propagation direction of large earthquake ruptures along a given fault section. The property of a preferred rupture direction can explain anomalous behavior of historic rupture events, and may have profound implications for many aspects of earthquake physics on large faults.  相似文献   

16.
The MS 6.9 Menyuan earthquake in Qinghai Province, west China is the largest earthquake by far in 2022. The earthquake occurs in a tectonically active region, with a background b-value of 0.87 within 100 ?km of the epicenter that we derived from the unified catalog produced by China Earthquake Networks Center since late 2008. Field surveys have revealed surface ruptures extending 22 ?km along strike, with a maximum ground displacement of 2.1 ?m. We construct a finite fault model with constraints from InSAR observations, which showed multiple fault segments during the Menyuan earthquake. The major slip asperity is confined within 10 ?km at depth, with the maximum slip of 3.5 ?m. Near real-time back-projection results of coseismic radiation indicate a northwest propagating rupture that lasted for ～10 ?s. Intensity estimates from the back-projection results show up to a Mercalli scale of IX near the ruptured area, consistent with instrumental measurements and the observations from the field surveys. Aftershock locations (up to January 21, 2022) exhibit two segments, extending to ～20 ?km in depth. The largest one reaches MS 5.3, locating near the eastern end of the aftershock zone. Although the location and the approximate magnitude of the mainshock had been indicated by previous studies based on paleoearthquake records and seismic gap, as well as estimated stressing rate on faults, significant surface-breaching rupture leads to severe damage of the high-speed railway system, which poses a challenge in accurately assessing earthquake hazards and risks, and thus demands further investigations of the rupture behaviors for crustal earthquakes.  相似文献   

17.
This paper reports internal structures of a bedding-parallel fault in Permian limestone at Xiaojiaqiao outcrop that was moved by about 0.5 m during the 2008 MW7.9 Wenchuan earthquake. The fault is located about 3 km to the south from the middle part of Yingxiu-Beichuan fault, a major fault in the Longmenshan fault system that was moved during the earthquake. The outcrop is also located at Anxian transfer zone between the northern and central segments of Yingxiu-Beichuan fault where fault system is complex. Thus the fault is an example of subsidiary faults activated by Wenchuan earthquake. The fault has a strike of 243° or N63°E and a dip of 38°NW and is nearly optimally oriented for thrust motion, in contrast to high-angle coseismic faults at most places. Surface outcrop and two shallow drilling studies reveal that the fault zone is several centimeters wide at most and that the coseismic slip zone during Wenchuan earthquake is about 1 mm thick. Fault zone contains foliated cataclasite, fault breccia, black gouge and yellowish gouge. Many clasts of foliated cataclasite and black gouge contained in fault breccia indicate multiple slip events along this fault. But fossils on both sides of fault do not indicate clear age difference and overall displacement along this fault should not be large. We also report results from high-velocity friction experiments conducted on yellowish gouge from the fault zone using a rotary shear low to high-velocity frictional testing apparatus. Dry experiments at normal stresses of 0.4 to 1.8 MPa and at slip rates of 0.08 to 1.35 m/s reveal dramatic slip weakening from the peak friction coefficient of around 0.6 to very low steady-state friction coefficient of 0.1-0.2. Slip weakening parameters of this carbonate fault zone are similar to those of clayey fault gouge from Yingxiu-Beichuan fault at Hongkou outcrop and from Pingxi fault zone. Our experimental result will provide a condition for triggering movement of subsidiary faults or off-fault damage during a large earthquake.  相似文献   

18.
It is deduced on the basis of field investigation that the total length of the stratigraphic fault associated with the great Haiyuan 8.5 magnitude earthquake of 1920 was 225 km. This fault was formed by 6 secondary faults with different geometric parameters, which align regularly inen echelon arrangement. Each secondary fault can be divided into three segments with different characteristics of deformation where the middle segment was mainly of the horizontal strike—slip fault while another two segments the vertical deformation as shown by the features of reverse or normal faults. It is also shown by the data of vertical and horizontal displacements that the horizontal displacement approached a maximum at the middle segment for each secondary fault and gradually decreased toward and finally disappeared at both ends of each segment while in contrast the vertical displacement was minimum at the middle and became large at both ends of the segment. The feature of the multiple peaks appeared in the deformation as shown by the earthquake displacements along the whole fault. This feature indicates that the 6 secondary faults associated with the great Haiyuan earthquake were the horizontal interrupted planes (i.e., dislocation surface) which were independent on each other, and hence each dislocation surface may represent an independent secondary fracture event of the earthquake. We thus think that the 6 relatively independent secondary events which occurred successfully might result in the great 8.5 magnitude Haiyuan earthquake. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 21–31, 1991. This project is sponsored by the Chinese Joint Seismological Science Foundation.  相似文献   

19.
In this article, we review our previous research for spatial and temporal characterizations of the San Andreas Fault (SAF) at Parkfield, using the fault-zone trapped wave (FZTW) since the middle 1980s. Parkfield, California has been taken as a scientific seismic experimental site in the USA since the 1970s, and the SAF is the target fault to investigate earthquake physics and forecasting. More than ten types of field experiments (including seismic, geophysical, geochemical, geodetic and so on) have been carried out at this experimental site since then. In the fall of 2003, a pair of scientific wells were drilled at the San Andreas Fault Observatory at Depth (SAFOD) site; the main-hole (MH) passed a ～200-m-wide low-velocity zone (LVZ) with highly fractured rocks of the SAF at a depth of ～3.2 km below the wellhead on the ground level (Hickman et al., 2005; Zoback, 2007; Lockner et al., 2011). Borehole seismographs were installed in the SAFOD MH in 2004, which were located within the LVZ of the fault at ～3-km depth to probe the internal structure and physical properties of the SAF. On September 282004, a M6 earthquake occurred ～15 km southeast of the town of Parkfield. The data recorded in the field experiments before and after the 2004 M6 earthquake provided a unique opportunity to monitor the co-mainshock damage and post-seismic heal of the SAF associated with this strong earthquake. This retrospective review of the results from a sequence of our previous experiments at the Parkfield SAF, California, will be valuable for other researchers who are carrying out seismic experiments at the active faults to develop the community seismic wave velocity models, the fault models and the earthquake forecasting models in global seismogenic regions.  相似文献   

20.
Changes in surface roughness on carbonate fault scarps often reflect varying durations of subaerial weathering. On the Pleasant Valley fault in central Nevada, the documentation of a surface rupture in 1915, a long recurrence interval of faulting, slow weathering rate, and a relatively high (2–3 m) single-event displacement make the discrimination of the historical and penultimate slip patches unambiguous. Following from a 2018 study, we used a Schmidt hammer and terrestrial laser scanning (TLS) to further test whether these weathering patterns delineate exposed slip patches on a fault scarp. Results show that Schmidt hammer rebound value ranges (termed ΔR – the difference between minimum and maximum R-values in repeat impacts at a point), increase by ~8–10 points across the historical–penultimate event transition zone in two separate scarp transects. TLS-derived surface roughness also indicates a clear difference between the most recent and penultimate events. The average single-event displacement (SED) estimated using the Schmidt hammer and TLS is 2.85 m at two transect sites and is roughly equivalent to the visually estimated 3 m. While this fault is an ideal case where we know some of the slip history, the results demonstrate that these techniques show promise for discriminating slip patches on larger carbonate fault scarps with longer paleoearthquake histories, and could be used alongside 36Cl cosmogenic exposure-age dating to improve paleoseismic records on normal faults. © 2019 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号