共查询到20条相似文献，搜索用时 78 毫秒
1.
High seismic Vp velocity anomalies (8.7–9.0 km s− 1) have long been known about in regions of the uppermost mantle of the Siberian craton, often in association with kimberlite fields. Laboratory measurement of seismic properties of five xenoliths, three peridotites and two eclogites, from the Udachnaya kimberlite under confining pressures up to 600 MPa were extrapolated to uppermost mantle P–T conditions of 1500 MPa and 500 °C, however none of the velocities are high enough to explain the observations. Eclogites or peridotites are commonly considered to be the source of anomalous high velocities. We prefer a peridotitic source to an eclogitic source due to the unusual chemistry and regional uniformity of eclogitic garnets required, maximum velocity limitations on laboratory measurements of seismic properties of natural eclogites, and purported abundance of eclogites in the lithosphere. Alternatively, a highly depleted peridotite, such as dunite or harzburgite, can produce velocities high enough to match observations. Olivine petrofabrics in most peridotites, including the three peridotites used in this study, are great enough to produce the observed high velocities provided olivine petrofabrics are continuous enough and correctly oriented to be seismically detectable and the modal proportion of olivine is high. There have been suggestions by other authors that the Siberian upper mantle is highly depleted and that a lithosphere-scale shear zone exists, which may have acted to organize fabrics into segments large enough for detection. Anomalously high Vp–Vs velocity ratios of greater than 1.8 are expected parallel to the olivine [100] maxima required to be present in a high-velocity olivine-dominated upper mantle. Vp–Vs velocity ratios can serve as a means of inferring large-scale anisotropy when limited seismic data are available, as in Siberia. 相似文献
2.
The Western Gneiss Region (WGR) marks the outcrop of a composite terrane consisting of variably re-worked Proterozoic basement and parautochthonous or autochthonous cover units. The WGR exhibits a gross structural, petrographic and thermobarometric zonation from southeast to northwest, reflecting an increasing intensity of Scandian (late Palaeozoic) metamorphic and structural imprint. Scandian-aged eclogites have been widely (though for kinetic reasons not invariably) stabilised in metabasic rocks but have suffered varying degrees of retrogression during exhumation. In the region between the Jostedal mountains and Nordfjord, eclogites commonly have distinctively prograde-zoned garnets with amphibolite or epidote–amphibolite facies solid inclusion suites and lack any evidence for stability of coesite (high pressure [HP] eclogites). In the south of this area, in Sunnfjord, eclogites locally contain glaucophane as an inclusion or matrix phase. North of Nordfjord, eclogites mostly lack prograde zoning and evidence for coesite, either as relics or replacive polycrystalline quartz, is present in both eclogites (ultrahigh pressure [UHP] eclogites) and, rarely, gneisses. Coesite or polycrystalline quartz after coesite has now been found in eight new localities, including one close to a microdiamond-bearing gneiss. These new discoveries suggest that, by a conservative estimate, the UHP terrane in the WGR covers a coastal strip of about 5000 km2 between outer Nordfjord and Moldefjord. A “mixed HP/UHP zone” containing both HP and UHP eclogites is confirmed by our observations, and is extended a further 40 km east along Nordfjord. Thermobarometry on phengite-bearing eclogites has been used to quantify the regional distribution of pressure (P) and temperature (T) across the WGR. Overall, a scenario emerges where P and T progressively increase from 500°C and 16 kbar in Sunnfjord to >800°C and 32 kbar in outer Moldefjord, respectively, in line with the distribution of eclogite petrographic features. Results are usually consistent with the silica polymorph present or inferred. The P–T conditions define a linear array in the P–T plane with a slope of roughly 5°C/km, with averages for petrographic groups lying along the trend according to their geographic distribution from SE to NW, hence defining a clear field gradient. This P–T gradient might be used to support the frequently postulated model for northwesterly subduction of the WGC as a coherent body. However, the WGC is clearly a composite edifice built from several tectonic units. Furthermore, the mixed HP/UHP zone seems to mark a step in the regional P gradient, indicating a possible tectonic break and tectonic juxtaposition of the HP and UHP units. Lack of other clear evidence for a tectonic break in the mixed zone dictates caution in this interpretation, and we cannot discount the possibility that the mixed zone is, at least, partly a result of kinetic factors operating near the HP–UHP transition. Overall, if the WGC has been subducted during the Scandian orogeny, it has retained its general down-slab pattern of P and T in spite of any disruption during exhumation. Garnetiferous peridotites derived from subcontinental lithospheric mantle may be restricted to the UHP terrane and appear to decorate basement-cover contacts in many cases. P–T conditions calculated from previously published data for both relict (Proterozoic lithospheric mantle?) porphyroclast assemblages and Scandian (subduction-related?) neoblastic assemblages do not define such a clear field gradient, but probably record a combination of their pre-orogenic P–T record with Scandian re-working during and after subduction entrainment. A crude linear array in the P–T plane defined by peridotite samples may be, in part, an artifact of errors in the geobarometric methods. A spatial association of mantle-derived peridotites with the UHP terrane and with basement-cover contacts is consistent with a hypothesis for entrainment of at least some of them as “foreign” fragments into a crustal UHP terrane during subduction of the Baltic continental margin to depths of >100 km, and encourages a more mobilistic view of the assembly of the WGC from its component lithotectonic elements. 相似文献
3.
The Cretaceous blueschist belt, Tavşanlı Zone, representing the subducted and exhumed northern continental margin of the Anatolide–Tauride platform is exposed in Western Anatolia. The Sivrihisar area east of Tavşanlı is made up of tectonic units consisting of i) metaclastics and conformably overlying massive marbles (coherent blueschist unit), ii) blueschist-eclogite unit, iii) marble–calcschist intercalation and iv) metaperidotite slab. The metaclastics are composed of jadeite–lawsonite–glaucophane and jadeite–glaucophane–chloritoid schists, phengite phyllites, and calcschists with glaucophane–lawsonite metabasite layers. The blueschist-eclogite unit representing strongly sheared, deeply buried and imbricated tectonic slices of accreted uppermost levels of the oceanic crust with minor metamorphosed serpentinite bodies consists of lawsonite-bearing eclogitic metabasites (approximately 90% of the field), lawsonite eclogites, metagabbros, serpentinites, pelagic marbles, omphacite–glaucophane–lawsonite metapelites and metacherts. The mineral assemblage of the lawsonite eclogite (garnet + omphacite > 70%) is omphacite, garnet, lawsonite, glaucophane, phengite and rutile. Lawsonite eclogite lenses are enclosed by garnet–lawsonite blueschist envelopes.Textural evidence from lawsonite eclogites and country rocks reveals that they did not leave the stability field of lawsonite during subduction and exhumation. The widespread preservation of lawsonite in eclogitic metabasites and eclogites can be attributed to rapid subduction and subsequent exhumation in a low geothermal gradient of the oceanic crust material without experiencing a thermal relaxation. Peak P–T conditions of lawsonite eclogites are estimated at 24 ± 1 kbar and 460 ± 25 °C. These P–T conditions indicate a remarkably low geotherm of 6.2 °C/km corresponding to a burial depth of 74 km. 相似文献
4.
David R. Gray John McL. Miller David A. Foster Robert T. Gregory 《Tectonophysics》2004,389(1-2):35-64
Controversy over the age of peak metamorphism and therefore the tectonic evolution of the Arabian margin relates to the polydeformed and polymetamorphosed nature of glaucophane-bearing eclogites from the Saih Hatat window beneath the allochthonous Samail ophiolite in NE Oman. These eclogites contain relicts of earlier fabrics, structures and metamorphic assemblages and provide a record of change from subduction to exhumation. The eclogites are part of a mafic layer that was disrupted into boudins up to 0.5 km in length within a lower plate shear zone (As Sifah shear zone). The megaboudins not only preserve the relicts of the highest grade of metamorphism but also an early ENE-trending lineation and sheathlike isoclines enveloped by the flat-lying schistosity. The boudin-bearing layer is isoclinally folded with calc-schist, mafic schist and quartz–mica schist, where the regional folds have axes parallel to the NE-trending stretching lineation (a-type folds). Textural evidence suggests multiple growth events for garnet and clinopyroxene, requiring polymetamorphism of the mafic layers that formed the eclogite megaboudins. The surrounding calc-schist and quartz–mica schist are both intensely deformed with transposition foliation containing an NE-trending lineation in phengite and asymmetric shear indicators such as C′-type shear bands and asymmetric pressure shadows around garnets, that give top-to-the-NE sense of shear. Although consistent ENE-trending lineations in all the boudins suggest that they have largely acted as passive, nonrotating rigid bodies, the presence of NE-vergent asymmetric mesofolds, extensive dynamic recrystallisation, multiple generations of phengites and a range of 40Ar–39Ar apparent ages within the megaboudins suggest, however, that they have not acted entirely passively during the later deformation. Phengites isolated from the high-P/low-T fabrics show groupings in 40Ar–39Ar apparent ages interpreted as distinct metamorphic/cooling intervals at 140–135, 120–98 and 92–80 Ma. Microstructural relations suggest that age groupings younger than 100 Ma reflect phengite growth during exhumation with the top-to-the-NE shearing. The older ages (120–110 Ma) from fabrics that give top-to-the-S shear sense may reflect growth during the subduction phase. The combination of groupings of apparent argon ages older than the crystallisation age of the Samail Ophiolite, the suggestion of different geothermal gradients, and superposed metamorphism suggest that the eclogites and garnet blueschists formed as a result of underthrusting along a break that was not directly related to the metamorphic sole of the ophiolite. The glaucophane–eclogites are interpreted as having formed at different times under varying pressure–temperature conditions during underthrusting with variations in the rate of underthrusting, allowing thermal equilibration and/or rapid cooling at different crustal levels. 相似文献
5.
Ultrasonic compressional wave velocities (Vp) and shear wave velocities (Vs) were measured with varying pressure up to 1.0 GPa in a temperature range from 25 to 400 °C for a suite of tonalitic–gabbroic rocks of the Miocene Tanzawa plutonic complex, central Japan, which has been interpreted as uplifted and exposed deep crust of the northern Izu–Bonin–Mariana (IBM) arc. The Vp values of the tonalitic–gabbroic rocks increase rapidly at low pressures from 0.1 to 0.4 GPa, and then become nearly constant at higher pressures above 0.4 GPa. The Vp values at 1.0 GPa and 25 °C are 6.3–6.6 km/s for tonalites (56.4–71.1 wt.% SiO2), 6.8 km/s for a quartz gabbro (53.8 wt.% SiO2), and 7.1–7.3 km/s for a hornblende gabbro (43.2–47.7 wt.% SiO2). Combining the present data with the P wave velocity profile of the northern IBM arc, we infer that 6-km-thick tonalitic crust exists at mid-crustal depth (6.1–6.3 km/s Vp) overlying 2-km-thick hornblende gabbroic crust (6.8 km/s Vp). Our model shows large differences in acoustic impedance between the tonalite and hornblende gabbro layers, being consistent with the strong reflector observed at 12-km-depth in the IBM arc. The measured Vp of Tanzawa hornblende-bearing gabbroic rocks (7.1–7.3 km/s) is significantly lower than that Vp modeled for the lowermost crustal layer of the northern IBM arc (7.3–7.7 km/s at 15–22 km depth). We propose that the IBM arc consists of a thick tonalitic middle crust and a mafic lower crust. 相似文献
6.
Paragonite- and garnet-bearing high-grade epidote-amphibolite (PGEA) in the Ise area of the Hida Mountains, Japan is characterized by the high-pressure (HP) epidote-amphibolite facies parageneses (M1), garnet + hornblende + clinozoisite + paragonite + quartz + rutile. Paragonite and garnet of the peak M1 stage are locally replaced by retrograde albite (+ oligoclase) and chlorite (M2), respectively. Phase equilibria constrain peak metamorphic conditions of P = 1.1–1.4 GPa and T = 530–570 °C, and a decompressional P–T path for this rock. Mineral parageneses of prograde epidote-amphibolite facies are comparable to some HP rocks from the Hongan region of western Dabie, but differ from other HP mafic schists with cooling ages of c. 330 Ma in the Hida Mountains. New paragonite K–Ar dating for the PGEA yields a Triassic cooling event at 210 Ma that is coeval with regional cooling and exhumation of the Sulu–Dabie–Qinling (SDQ) belt. Both petrological and geochronological data of the Triassic HP epidote-amphibolite in Hida Mountains support our earlier hypothesis that the SDQ belt extends across the Korean Peninsula to SW Japan. 相似文献
7.
Petrography, mineral and bulk chemistry of upper mantle-derived eclogites (garnet and clinopyroxene) from the Koidu Kimberlite Complex, Sierra Leone, are presented in the first comprehensive study of these xenoliths from West Africa. Although peridotite-suite xenoliths are generally more common in kimberlites, the upper mantle sample preserved in Pipe Number 1 at Koidu is exclusively eclogitic, making this the fifth locality in which eclogite is the sole polymineralic xenolith in kimberlite. Over 2000 xenoliths were collected, of which 47 are described in detail that include diamond, graphite, kyanite, corundum, quartz after coesite, and amphibole eclogites. Grossular-pyrope-almandine garnets are chromium-poor (<0.72 wt% Cr2O3) and fall into two distinct groups based on magnesium content. High-MgO garnets have an average composition of Pyr67Alm22Gross11, low-MgO garnets are grossular- and almandine-rich with an average composition of Gross34Pyr33Alm33. Clinopyroxenes are omphacitic with a range in jadeite contents from 7.7 to 70.1 mol%. Three eclogites contain zoned and mantled garnets with almandine-rich cores and pyrope-rich rims, and zoned clinopyroxenes with diopside-rich cores and jadeite-rich rims, and are among a very rare group of eclogites reported on a world-wide basis. The bulk compositions of eclogites have ranges comparable to that of basalts. High-MgO eclogites (16–20 wt% MgO) have close chemical affinities to picrites, whereas low-MgO eclogites (6–13 wt% MgO) are similar to alkali basalts. High-MgO eclogites contain high-MgO garnets and jadeiterich clinopyroxenes. Low-MgO eclogites contain low-MgO garnets, diopside and omphacite, and the group of primary accessory phases (diamond, graphite, quartz after coesite, kyanite, and corundum); grospydites are peraluminous. Estimated temperatures and pressures of equilibration of diamond-bearing eclogites, using the diamond-graphite stability curve and the Ellis and Green (1979) geothermometer, are 1031°–1363° C at 45–50 kb.K
D values of Fe-Mg in garnet and clinopyroxene range from 2.3 to 12.2. Diamonds in eclogites are green, yellow, and clear, and range from cube to octahedral morphologies; the entire spectrum in color and morphology is present in a single metasomatized eclogite with zoned garnet and clinopyroxene. Ages estimated from Sm-Nd mineral isochrons range from 92–247 Ma. Nd values range from +4.05 to 5.23. Values of specific gravity range from 3.06–3.60 g/cc, with calculated seismic Vp of 7.4–8.7 km/s. Petrographie, mineral, and bulk chemical data demonstrate an overall close similarity between the Koidu xenolith suite and upper mantle eclogites from other districts in Africa, Siberia and the United States. At least two origins are implied byP-T, bulk chemistry and mineral compositions: low-MgO eclogites, with diamond and other accessory minerals, are considered to have formed from melts trapped and metamorphically equilibrated in the lithosphere; high-MgO eclogites are picritic and are the products of large degrees of partial melting, with equilibration in the asthenosphere. Fluid or diluted melt metasomatism is pervasive and contributed here and elsewhere to the LIL and refractory silicate incompatible element signature in kimberlites and lamproites, and to secondary diamond growth. 相似文献
8.
We have developed a simple semblance-weighted stacking technique to estimate crustal thickness and average VP/VS ratio using teleseismic receiver functions. We have applied our method to data from 32 broadband seismograph stations that cover a 700 × 400 km2 region of the Grenville orogen, a 1.2–0.98 Ga Himalayan-scale collisional belt in eastern North America. Our seismograph network partly overlaps with Lithoprobe and other crustal refraction surveys. In 8 out of 9 cases where a crustal-refraction profile passes within 30 km of a seismograph station, the two independent crustal thickness estimates agree to within 7%. Our regional crustal-thickness model, constructed using both teleseismic and refraction observations, ranges between 34.0 and 52.4 km. Crustal-thickness trends show a strong correlation with geological belts, but do not correlate with surface topography and are far in excess of relief required to maintain local isostatic equilibrium. The thickest crust (52.4 ± 1.7 km) was found at a station located within the 1.1 Ga mid-continent (failed) rift. The Central Gneiss Belt, which contains rocks exhumed from deep levels of the crust, is characterized by VP/VS ranging from 1.78 to 1.85. In other parts of the Grenville orogen, VP/VS is found to be generally less than 1.80. The thinnest crust (34.5–37.0 km) occurs northeast of the 0.7 Ga Ottawa–Bonnechere graben and correlates with areas of high intraplate seismicity. 相似文献
9.
Eclogite and pyroxenite xenoliths from off-craton kimberlites near the Kaapvaal Craton, South Africa
Christel Emma Tinguely Michel Grgoire Anton P. le Roex 《Comptes Rendus Geoscience》2008,340(12):811-821
Mantle xenoliths brought to the surface by kimberlite magmas along the south-western margin of the Kaapvaal craton in South Africa can be subdivided into eclogites sensu stricto, kyanite eclogites and orthopyroxene eclogites, all containing omphacite, and garnet clinopyroxenites and garnet websterites characterised by diopside. Texturally, chemically (major elements) and thermally, we observe an evolution from garnet websterites (TEG = 742–781 °C) towards garnet clinopyroxenites (TEG = 715–830 °C) and to eclogites (TEG = 707–1056 °C, mean value of 913 °C). Pressures calculated for orthopyroxene-bearing samples suggest upper mantle conditions of equilibration (P = 16–33 kb for the garnet websterites, 18 kb for a garnet clinopyroxenite and 23 kb for an opx-bearing eclogite). The overall geochemical similarity between the two groups of xenoliths (omphacite-bearing and diopside-bearing) as well as the similar trace element patterns of clinopyroxenes and garnet suggest a common origin for these rocks. Recently acquired oxygen isotope data on garnet (δ18Ognt = 5.25–6.78 ‰ for eclogites, δ18Ognt = 5.24–7.03 ‰ for garnet clinopyroxenites) yield values ranging from typical mantle values to other interpreted as resulting from low-temperature alteration or precursors sea-floor basalts and associated rocks. These rocks could then represent former magmatic oceanic rocks that crystallised from a same parental magma as plagioclase free diopside-bearing and plagioclase-bearing crustal rocks. During subduction, these oceanic rock protoliths equilibrated at mantle depth, with the plagioclase-bearing rocks converting to omphacite and garnet-bearing lithologies (eclogites sensu largo), whereas the plagioclase-free diopside-bearing rocks converted to diopside and garnet-bearing lithologies (garnet websterites and garnet clinopyroxenites). 相似文献
10.
The subducted oceanic crust within continental-type UHP metamorphic belt in the North Qaidam, NW China: Evidence from petrology, geochemistry and geochronology 总被引：25，自引：0，他引：25
Three types of eclogite, together with a serpentinized harzburgite, coexist as blocks within granitic and pelitic gneisses along the Shaliuhe cross section, the eastern part of the North Qaidam continental-type ultrahigh-pressure (UHP) metamorphic belt, NW China. The olivine (Ol1) and orthopyroxene in the harzburgite are compositionally similar to present-day abyssal peridotites. The kyanite–eclogite is derived from a troctolitic protolith, whereas the epidote–eclogite from a gabbroic protolith, both having distinct positive Eu anomalies, low TiO2, and high Al2O3 and MgO. The kyanite–eclogite shows inherited cumulate layering. The phengite–eclogite has high TiO2, low Al2O3 and MgO with incompatible trace elements resembling enriched-type MORB. Sr–Nd isotope data indicate that the protoliths of both kyanite–eclogite and epidote–eclogite ([87Sr/86Sr]i ~ 0.703–0.704; εNd(T) ~ 5.9–8.0) are of mantle origin (e.g., ocean crust signatures). On the other hand, while the lower εNd(T) value (1.4–4.1) of phengite–eclogite is more or less consistent with an enriched MORB protolith, their high [87Sr/86Sr]i ratio (0.705–0.716) points to an additional enrichment in their history, probably in an subduction-zone environment. Field relations and geochemical analyses suggest that the serpentinized harzburgite and the three types of eclogite constitute the oceanic lithological section of an ophiolitic sequence from mantle peridotite, to cumulate, and to upper basaltic rocks. The presence of coesite pseudomorphs and quartz exsolution in omphacite plus thermobarometric calculations suggests that the eclogites have undergone ultrahigh pressure metamorphism (i.e., peak P ≥ 2.7 GPa). The harzburgite may also have experienced the same metamorphism, but the lack of garnet suggests that the pressure conditions of ≤ 3.0 GPa. Zircon U–Pb SHRIMP dating shows that the eclogites have a protolith age of 516 ± 8 Ma and a metamorphic age of 445 ± 7 Ma. These data indicate the presence of a Paleo-Qilian Ocean between Qaidam and Qilian blocks before the early Ordovician. The ophiolitic assemblage may be the relics of subducted oceanic crust prior to the subduction of continental materials during Ordovician–Silurian times and ultimate continent collision. These rocks, altogether, record a complete history of ocean crust subduction, to continental subduction, and to continental collision. 相似文献
11.
The exhumation mechanism of high‐pressure (HP) and ultrahigh‐pressure (UHP) eclogites formed by the subduction of oceanic crust (hereafter referred to as oceanic eclogites) is one of the primary uncertainties associated with the subduction factory. The phase relations and densities of eclogites with MORB compositions are modelled using thermodynamic calculations over a P–T range of 1–4 GPa and 400–800 °C, respectively, in the NCKFMASHTO (Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3) system. Our modelling suggests that the mineral assemblages, mineral proportions and density of oceanic crust subducted along a cold P–T path are quite different from those of crust subducted along a warm P–T path, and that the density of oceanic eclogites is largely controlled by the stability of low‐density hydrous minerals, such as lawsonite, chlorite, glaucophane and talc. Along a cold subduction P–T path with a geotherm of ~6 °C km?1, lawsonite is always present at 1.1 to >4.0 GPa, and chlorite, glaucophane and talc can be stable at pressures of up to 2.3, 2.6 and 3.6 GPa respectively. Along such a P–T path, the density of subducted oceanic crust is always lower than that of the surrounding mantle at depths shallower than 110–120 km (< 3.3–3.6 GPa). However, along a warm subduction P–T path with a geotherm of ~10 °C km?1, the P–T path is outside the stability field of lawsonite, and the hydrous minerals of chlorite, epidote and amphibole break down completely into dry dense minerals at relatively lower pressures of 1.5, 1.85 and 1.9 GPa respectively. Along such a warm subduction P–T path, the subducted oceanic crust becomes denser than the surrounding mantle at depths >60 km (>1.8 GPa). Oceanic eclogites with high H2O content, oxygen fugacity, bulk‐rock XMg [ = MgO/(MgO + FeO)], XAl [ = Al2O3/(Al2O3 + MgO + FeO)] and low XCa [ = CaO/(CaO + MgO + FeO + Na2O)] are likely suitable for exhumation, which is consistent with the bulk‐rock compositions of the natural oceanic eclogites on the Earth's surface. On the basis of natural observations and our calculations, it is suggested that beyond depths around 110–120 km oceanic eclogites are not light enough and/or there are no blueschists to compensate the negative buoyancy of the oceanic crust, therefore explaining the lack of oceanic eclogites returned from ultradeep mantle (>120 km) to the Earth's surface. The exhumed light–cold–hydrous oceanic eclogites may have decoupled from the top part of the sinking slab at shallow depths in the forearc region and are exhumed inside the serpentinized subduction channel, whereas the dense–hot–dry eclogites may be retained in the sinking slab and recycled into deeper mantle. 相似文献
12.
The HYPODD relocation of 1172 aftershocks, recorded on 8–17 three-component digital seismographs, delineate a distinct south dipping E–W trending aftershock zone extending up to 35 km depth, which involves a crustal volume of 40 km × 60 km × 35 km. The relocated focal depths delineate the presence of three fault segments and variation in the brittle–ductile transition depths amongst the individual faults as the earthquake foci in the both western and eastern ends are confined up to 28 km depth whilst in the central aftershock zone they are limited up to 35 km depth. The FPFIT focal mechanism solutions of 444 aftershocks (using 8–12 first motions) suggest that the focal mechanisms ranged between pure reverse and pure strike slip except some pure dip slip solutions. Stress inversion performed using the P and T axes of the selected focal mechanisms reveals an N181°E oriented maximum principal stress with a very shallow dip (= 14°). The stress inversions of different depth bins of the P and T axes of selected aftershocks suggest a heterogeneous stress regime at 0–30 km depth range with a dominant consistent N–S orientation of the P-axes over the aftershock zone, which could be attributed to the existence of varied nature and orientation of fractures and faults as revealed by the relocated aftershocks. 相似文献
13.
Ultrasonic laboratory measurements of P-wave velocity (Vp) were carried out up to 1.0 GPa in a temperature range of 25–400 °C for crustal and mantle xenoliths of Ichino-megata, northeast Japan. The rocks used in the present study cover a nearly entire range of lithological variation of the Ichino-megata xenoliths and are considered as representative rock samples of the lower crust and upper mantle of the back arc side of the northeast (NE) Honshu arc. The Vp values measured at 25 °C and 1.0 GPa are 6.7–7.2 km/s for the hornblende gabbros (38.6–46.9 wt.% SiO2), 7.2 km/s for the hornblende-pyroxene gabbro (43.8 wt.% SiO2), 6.9–7.3 km/s for the amphibolites (36.1–44.3 wt.% SiO2), 8.0–8.1 km/s for the spinel lherzolites (46.2–47.2 wt.% SiO2) and 6.30 km/s for the biotite granite (72.1 wt.% SiO2). Combining the present data with the Vp profile of the NE Honshu arc [Iwasaki, T., Kato, W., Moriya, T., Hasemi, A., Umino, N., Okada, T., Miyashita, K., Mizogami, T., Takeda, T., Sekine, S., Matsushima, T., Tashiro, K., Miyamachi, H. 2001. Extensional structure in northern Honshu Arc as inferred from seismic refraction/wide-angle reflection profiling. Geophys. Res. Lett. 28 (12), 2329–2332], we infer that the 15 km thick lower crust of the NE Honshu arc is composed of amphibolite and/or hornblende (±pyroxene) gabbro with ultrabasic composition. The present study suggests that the Vp range of the lower crustal layer (6.6–7.0 km/s) in the NE Honshu arc, which is significantly lower than that obtained from various seismic measurements (e.g. the northern Izu-Bonin-Mariana arc: 7.1–7.3 km/s), is due to the thick hydrous lower crustal layer where hornblende, plagioclase and magnetite are dominant. 相似文献
14.
Metre to tens‐of‐metre wide, steeply dipping, greenschist facies shear zones that cut blueschists and eclogites of the Combin and Zermatt–Saas Zones at Täschalp and in adjacent areas of the western Alps were sites of extensive recrystallization driven by fluid flow and deformation. Rb–Sr data imply that these shear zones formed at 42–37 Ma with a systematic younging of structures northward toward, and into, the hangingwall of the Mischabel Structure. Shearing commenced at 400–475 °C and 400–500 MPa and continued as pressures and temperatures fell to 300–350 °C and 300–350 MPa. Individual shear zones were active for 2–3 Myr with later lower grade stages of shearing concentrated into narrow zones. Fluids that infiltrated the shear zones were water rich (XH2O > 0.9). Alteration zones around albite veins and at the margins of serpentinite bodies are penecontemporaneous with these shear zones and formed at approximately the same conditions. The eclogites were exhumed from c. 64 km at 44 Ma to 14–16 km at 42–41 Ma implying exhumation rates of 2–5 cm yr?1. Rapid exhumation was probably achieved by extension aided by buoyancy, following subduction of continental crust, and rapid erosion. The shear zones form part of a regional‐scale extensional system responsible for a significant portion of the exhumation of the subducted oceanic crust. 相似文献
15.
Sanzhong Li Timothy M. Kusky Xiaochun Liu Guowei Zhang Guochun Zhao Lu Wang Yuejun Wang 《Gondwana Research》2009,16(2):294
The western Dabie orogen (also known as the Hong'an block) forms the western part of the Dabie–Sulu HP–UHP belt, central China. Rocks of this orogen have been subjected to pervasive ductile deformation, and include numerous quartz schists and felsic mylonites cropping out in ductile shear zones. Quartz textures in these mylonites contain important clues for understanding the movement sense of late-collisional extrusion and exhumation of high-pressure–ultrahigh-pressure (HP–UHP) rocks from the lower crustal level to the upper crustal level during Middle Triassic and Early Jurassic. The orientation and distribution of quartz crystallographic axes were used to confirm the regional shear sense across the orogen. The asymmetry of c-axis patterns consistently indicates top-to-the-southeast thrusting across the orogen in early structural stages. Later stages of deformation show different senses of movement in northern and southern parts of the orogen, with top-to-the-northwest sinistral shearing recorded in rocks north of the Xinxian HP–UHP eclogite-facies belt, and top-to-the-southeast dextral shearing south of the same unit.Based on our study on quartz c-axis fabrics and marco- to micro-scale structures, simultaneous southeastward shearing within a large part of the orogen and normal faulting north of the Xinxian HP–UHP unit is explained by upward extrusion in early stages of deformation. The extrusion process has been attributed to syn- and late-collisional processes, accounting for some earlier deformation in the western Dabie orogen such as metamorphic sequences around the core of the Xinxian HP–UHP eclogite-facies unit. Much higher pressure of deformation is also indicated in the aligned glaucophane and omphacite from blueschist and eclogite in the field. An orogen-parallel eastward extrusion of the Xinxian HP–UHP eclogite-facies unit, however, occurred diachronously in later stages of deformation. Therefore, a tectonic model combining an early upward extrusion with a later eastward extrusion is presented. Two different stages and types of extrusion for exhumation of HP–UHP rocks are suitable to all of east central China. Geochronological data shows that the first, upward extrusion occurred during Middle Triassic, the second, eastward extrusion occurred during Late Triassic to Early Jurassic. These two extrusions are correlative with two stages of rapid exhumation of the Dabie HP–UHP rocks, respectively. These two-stage late-collisional (Middle Triassic to Early Jurassic) extrusion events bridge the gap between syn-collisional (Early to Middle Triassic) vertical extrusion and post-collisional (Cretaceous) eastward-directed lateral escape and provide vital clues to understanding the more detailed processes of exhumation of HP–UHP rocks. 相似文献
16.
We have studied the focal mechanisms of the 1980, 1997 and 1998 earthquakes in the Azores region from body-wave inversion of digital GDSN (Global Digital Seismograph Network) and broadband data. For the 1980 and 1998 shocks, we have obtained strike–slip faulting, with the rupture process made up of two sub-events in both shocks, with total scalar seismic moments of 1.9 × 1019 Nm (Mw = 6.8) and 1.4 × 1018 Nm (Mw = 6.0), respectively. For the 1997 shock, we have obtained a normal faulting mechanism, with the rupture process made up of three sub-events, with a total scalar seismic moment of 7.7 × 1017 Nm (Mw = 5.9). A common characteristic of these three earthquakes was the shallow focal depth, less than 10 km, in agreement with the oceanic-type crust. From the directivity function of Rayleigh (LR) waves, we have identified the NW–SE plane as the rupture plane for the 1980 and 1998 earthquakes with the rupture propagating to the SE. Slow rupture velocity, about of 1.5 km/s, has been estimated from directivity function for the 1980 and 1998 earthquakes. From spectral analysis and body-wave inversion, fault dimensions, stress drop and average slip have been estimated. Focal mechanisms of the three earthquakes we have studied, together with focal mechanisms obtained by other authors, have been used in order to obtain a seismotectonic model for the Azores region. We have found different types of behaviour present along the region. It can be divided into two zones: Zone I, from 30°W to 27°W; Zone II, from 27°W to 23°W, with a change in the seismicity and stress direction from Zone I. In Zone I, the total seismic moment tensor obtained corresponded to left-lateral strike–slip faulting with horizontal pressure and tension axes in the E–W and N–S directions, respectively. In Zone II, the total seismic moment tensor corresponded to normal faulting, with a horizontal tension axis trending NE–SW, normal to the Terceira Ridge. The stress pattern for the whole region corresponds to horizontal extension with an average seismic slip rate of 4.4 mm/yr. 相似文献
17.
The western terranes exposed east of the Pan-African suture in western Hoggar (southwest Algeria), are reexamined in the light of new structural, petrologic and by the 40Ar/39Ar laser probe data on metamorphic micas and amphiboles. To the north, the Tassendjanet nappe includes the Paleoproterozoic basement, its Mesoproterozoic cover and mafic rocks representing the roots of a ca. 680 Ma arc overlain by Late Neoproterozoic andesites and volcanic greywackes. The nappe preserved at rather shallow crustal level in the east was emplaced southward (D1a) to southeastward (D2). In the south, two metamorphic suites are distinguished. The Tideridjaouine–Tileouine high-pressure metamorphic belt (T=550–600 °C, P=1.4–1.8 GPa) represents a slab of subducted continental material exposed along the western edge of the In Ouzzal granulite unit interpreted as a microcontinent. Differential exhumation of tectonic slices from the high-pressure belt occurred around 615–600 Ma through a system of west-directed recumbent folds (D1b). The Egatalis high grade belt in the west was intruded by syn-metamorphic gabbro–norite bodies. It includes unretrogressed low-pressure granulite facies rocks (T around 750–800 °C, P0.45 GPa) cooled at a rate of 15°/m.y. between 600 and 580 Ma, and followed by the emplacement of several late-kinematic granitic plutons. Final exhumation of the low-pressure, high-temperature metamorphic rocks, that are not found as pebbles in the molasse, took place in the Late Cambrian. The early and relatively fast cooling of the high-pressure and high-temperature metamorphic rocks of the southern part of the Tassendjanet terrane is at variance with the slow cooling of central Hoggar where repeated magmatic activity as young as Late Cambrian occurred [Lithos 45 (1998) 245]. 相似文献
18.
Source parameters of the ML 4.1 earthquake of November 08, 2006, southeast Beni-Suef, northern Egypt
A. Badawy A.K. Abdel-Fattah Sh. M. Ali W. Farid 《Journal of African Earth Sciences》2008,51(3):151-159
In the early morning hours on Wednesday November 08, 2006 at 04:32:10(GMT) a small earthquake of ML 4.1 has occurred at southeast Beni-Suef, approximately 160 km SEE of Cairo, northern Egypt. The quake has been felt as far as Cairo and its surroundings while no casualties were reported. The instrumental epicentre is located at 28.57°N and 31.55°E. Seismic moment is 1.76 E14 Nm, corresponding to a moment magnitude Mw 3.5. Following a Brune model, the source radius is 0.3 km with an average dislocation of 1.8 cm and a 2.4 MPa stress drop. The source mechanism from a first motion fault plane solution shows a left-lateral strike-slip mechanism with a minor dip-slip component along fault NNW striking at 161°, dipping 52° to the west and rake −5°. Trend and plunging of the maximum and minimum principle axes P/T are 125°, 28°, 21°, and 23°, respectively. A comparison with the mechanism of the October, 1999 event shows similarities in faulting type and orientation of nodal planes.Eight small earthquakes (3.0 ML < 5.0) were also recorded by the Egyptian National Seismological Network (ENSN) from the same region. We estimate the source parameters and fault mechanism solutions (FMS) for these earthquakes using displacement spectra and P-wave polarities, respectively. The obtained source parameters including seismic moments of 4.9 × 1012–5.04 × 1015 Nm, stress drops of 0.2–4.9 MPa and relative displacement of 0.1–9.1 cm. The azimuths of T-axes determined from FMS are oriented in NNE–SSW direction. This direction is consistent with the present-day stress field in Egypt and the last phase of stress field changes in the Late Pleistocene, as well as with recent GPS measurements. 相似文献
19.
In order to better constrain the interpretation and the nature of the seismic reflectors, experimental measurements at high confining pressure (up to 300 MPa) and room temperature of the compressional wave velocity (Vp) on 10 samples representative of the most common lithologies along the Aurina (Ahrntal), Tures (Tauferer Tal), and Badia (Abtei Tal) Valleys profile (Eastern Alps, Italy) have been performed. For each sample, the speed of ultrasonic waves was measured in three mutually perpendicular directions, parallel and normal to the rock foliation and lineation.The main results are:(a) Good agreement between the calculated vs. measured modal compositions of the considered rocks, indicating that they were presumably equilibrated at the estimated P–T conditions; therefore, the seismic properties are representative of the crustal level indicated by the thermobarometry.(b) Measured and calculated average Vp are in good agreement, and are typical of mid-crustal level (6.0–6.5 km/s). Only the amphibolites show Vp typical of the lower crust (7.2 km/s).(c) The seismic anisotropy of metapelites is very high (12–27%), both with orthorhombic and transverse isotropy symmetry; amphibolites are transversely isotropic with an anisotropy of 8%; orthogneisses and granitoids are isotropic or weakly anisotropic.(d) The contacts between amphibolites and all other rock types may generate good reflections, provided they are not steeply inclined. Although the metamorphic foliation remains steeply inclined, discordant buried sub-horizontal igneous contacts may be detected. 相似文献
20.
Application of hornblende thermobarometry and fluid inclusion studies to the Palaeoproterozoic (1.7 Ga) basement rocks from Maddhapara, NW Bangladesh, provide information on the pressure and temperature (P–T) conditions of crystallization, the emplacement depth and composition of magmatic fluid. The basement rocks are predominantly diorite or quartz diorite with a mineral assemblage of plagioclase, hornblende, biotite, quartz, K-feldspar, titanite, and secondary epidote and chlorite. The calculated P–T conditions of the dioritic rocks are 680–725 °C and 4.9–6.4 kbar, which probably correspond to crystallization conditions. Fluid inclusion studies suggest that low- to medium-salinity (0–6.4 wt.% NaCleq) H2O-rich fluids are trapped during the crystallization of quartz and plagioclase. The isochore range calculated for primary aqueous inclusions is consistent with the P–T condition obtained by geothermobarometry. The basement rocks likely crystallized at a depth of 17–22 km, with a minimum average exhumation rate of 12–15 m/Ma during Palaeoproterozoic to Lopingian time. Such slow exhumation indicates low relief continental shield surface during this period. 相似文献