共查询到17条相似文献，搜索用时 593 毫秒
1.
轻型海洋静力触探系统是适合于海上作业的电测式原位测试系统,它通过传感器可以同步测量锥端阻力、侧壁摩擦力及孔隙水压力等3项指标,从而推算海底土力学参数。使用轻型海洋静力触探系统在黄河水下三角洲浅水区域进行了地质勘察,勘察结果表明：该系统运行稳定,操作简单,测试结果可靠,成果可以在海底土层结构划分、地基土承载力计算和土体液化判别等方面进行应用,从而避免了常规地质钻探取芯对样品扰动造成测试结果失真的问题,该项原位测试技术可以在海洋工程或油气开发中得到广泛的应用。 相似文献
2.
3.
近年来,在天津沿海地区的工程勘察中,积累了大量的静力触探参数资料与地基土层的物理力学参数资料。利用计算机的EXCEL数据处理软件,将各地基土层的地基土物理力学参数统计平均,同时将相应土层的静力触探参数统计平均,然后对平均后的数据进行统计回归,得到静力触探参数(锥尖阻力qc与侧摩阻力fs)与地基土层物理力学参数(天然含水量ω、天然密度ρ、孔隙比e、压缩系数a及压缩模量Es)间的统计回归方程。在天津沿海地区进行工程勘察时,利用所得方程可从静力触探参数(或土体物理力学参数)方便地得到土体物理力学参数(或静力触探参数),进而可以节约外业勘察或室内试验的工作量。 相似文献
4.
5.
海洋开发已经步入全海深时代,迫切需要获取全海深海底沉积物力学特性。由于海洋工程地质环境的特殊性,尤其是深海,常规取样难度较大,并且会扰动原状土体,海底沉积物原位测试成为海底工程勘察的重要手段。介绍了静力触探测试、十字板剪切测试和全流动贯入测试等海底沉积物力学特性的原位测试方法;归纳总结了影响原位测试结果的因素主要包括水深、底质类型以及解析方法等;重点介绍了一种全海深海洋探索技术"深海着陆器";展望了全海深沉积物力学特性原位测试技术面临的机遇与挑战。 相似文献
6.
7.
8.
承受水平荷载作用的桩基,规范中常采用m法进行桩基水平承载力的计算,地基土水平地基抗力系数的比例系数m值在规范中根据地基土的状态、类别以表格给出。在地基勘察中,现在广泛采用静力触探试验。直接利用静力触探数据给出比例系数m值。将使桩基设计所用参数更加直接准确。本文利用天津地区地层大量静力触探资料与地基土状态数据,利用统计分析回归方法,总结出地基土的液性指数IL与静力触探参数锥尖阻力qc及摩阻比Rf间的关系式,针对天津的地层土体,给出利用静力触探资料查用m值的表格,为桩基的设计计算提供资料。 相似文献
9.
利用东海陆架海底输油管道路由调查获得的孔压静力触探数据和钻探资料等,采用统计分析的方法,对管道路由区5 m以浅土体的孔压静力触探曲线特征、土的分类方法鉴别作了探讨,结果表明:研究区5 m以浅黏性土的锥尖阻力(qc),侧摩阻力(fs)值较小,且随深度呈线性增加,粉质土的qc,fs值增大,但随深度线性增加规律不明显,砂类土的qc值急剧增大,但fs值变化不大;Robertson法和Eslami-Fellenius法两种土类划分方法均适用于研究区浅表层软土的土类划分,但Robertson法在判别粉质土时受到一定限制,Eslami-Fellenius法判别较为准确,应用简单。本研究可为我国在海底管线工程路由勘察中直接利用孔压静力触探(CPTU)参数划分土层和判别土类作铺垫。 相似文献
10.
海床式静力触探设备工作效率高,能够实现从垂向上对地层的连续探测,数据分辨率较好。通过对黄河口海域3个静力触探孔和1个地质钻孔的分析,将研究区20m以浅地层自上而下划分为粉土、粉质黏土、粉土夹粉砂或粉砂、粉质黏土、粉土五层,静力触探曲线对粉土层中的硬壳层和粉质黏土层中的贝壳夹层等特殊地质现象有很好的反映。对粉质黏土的静力触探参数与物理力学参数进行相关性分析,得到适合该区域的回归方程。采用基于CPT数据的液化判别法,对研究区表层粉土液化可能性进行评判,通过Seed简化法计算的周期应力比(CSR)与Olsen法计算的周期阻力比(CRR)的大小比较,得出当抗震设防烈度为7度时,研究区表层粉土不会液化,当抗震设防烈度为8度时,粉土层将发生液化,计算最大液化深度3.7m。 相似文献
11.
静力触探(CPT)是一种速度快,数据连续、再现性好、操作省力等优点的原位测试方法。随着海洋开发的迅速发展,CPT测试技术在国内外海洋工程领域的使用越来越普遍。因此,了解国外海上CPT设备和应用情况,探讨应用中的问题,对CPT测试技术在我国海上工程领域的应用具有重要意义。文章描述了国外海上静力触探(CPT)测试技术的发展现状,阐明了主要的海床CPT(Seabed CPT)设备和井下CPT(Downhole CPT)设备的特点,并对不同CPT设备在海洋工程领域的应用作了分析,这对海上CPT测试技术在我国的应用和发展具有一定的参考价值和指导作用。 相似文献
12.
Xueliang Zhao 《Marine Georesources & Geotechnology》2013,31(3):272-281
The standard penetration test (SPT) and cone penetration test (CPT) are the two most commonly used in-situ tests. In this paper, SPT-CPT correlation is investigated using statistical and regression method based on a database of in-situ tests. Two correlation equations of the SPT N-value and the CPT cone tip resistance qc are proposed. The equations are applied for the liquefaction potential evaluation. Three effect factors including the soil type, mean particle size, and fine content are investigated for SPT-CPT correlation. The simple correlation can be used for the preliminary site investigation with least data and information. The comprehensive one can give more accurate result with detailed data. These two correlation equations are useful for different purposes with different accuracies. The liquefaction evaluations using the proposed correlation method are compared with those from the Chinese code method. It is shown that the proposed correlation can be helpful for site investigation and geotechnical design in practice. 相似文献
13.
For South Korea, liquefaction potential along the western coast has not been widely assessed because South Korea is considered to be a low seismic hazard. However, recent earthquake events and historical records indicate that the seismic hazard of South Korea should not be ignored. Moreover, as artificial fills are extensively used along the western coast for development, liquefaction evaluation of the soils in this area is necessary. In this paper, we present: (1) the seismic characteristics of the study area; (2) procedures for evaluating liquefaction potential, focusing on the liquefaction potential index (LPI) approach; and (3) LPI distributions at several representative locations along the western coast of South Korea under various seismic scenarios. The liquefaction potential index represents the liquefaction potential over the upper 20 m of a boring or sounding. Using cone penetration test (CPT) and standard penetration test (SPT) data from two coastal sites, we compare and discuss CPT-based and SPT-based LPI values, particularly values computed in nonplastic, silt-rich soils. In these soils, it appears that the CPT yields lower liquefaction resistance, resulting in large LPI values. Finally, discussion and suggestions are provided for CPT- and SPT-based liquefaction assessment of low plasticity and high fines content soils. 相似文献
14.
目前海洋石油导管架平台桩基础的轴向极限承载力常用的设计方法为API RP2A(美国石油协会)和静力触探(CPT)的方法.在这两种方法的基础上,提出了用BP神经网络模型对桩的轴向极限承载力进行计算的思路,能够有效地预测桩的轴向极限承载力.根据BP神经网络算法具有较强的非线性映射能力和学习功能的特点,通过对影响单桩极限承载力因素的分析,依据静力触探资料建立了基于BP神经网络的单桩轴向极限承载力预测模型.通过利用API RP2A方法分析成果对该模型进行学习训练和预测检验,证明了预测模型性能良好、具有较高的精度和收敛速度快等特点,验证了神经网络方法的可行性,预测结果能够指导桩基础设计,缩短周期.因而具有较大的工程实用价值. 相似文献
15.
16.
海洋石油建设中的一个关键环节是对有关海域的工程地质条件作出准确评价。海上原位静力触探(CPT)是主要的原位勘察手段,与陆地CPT不同,其贯入方式主要有Seabed和Downhole两种形式。这两种CPT由于贯入方式不同,所得到的锥端阻力存在一定的差异。采用有限元方法对这两种形式的CPT锥端阻力和贯入模式进行计算分析。研究显示,CPT入土过程中,周围土体存在两种不同位移状态,即滑动状态和排挤状态。在入土初期,土体以滑动状态为主,土体中竖向应力随贯入深度的增加而递增。在入土一定深度以后,土体的排挤状态占主导地位,竖向应力变化趋于平稳。这两种位移状态的相互转化解释了Seabed CPT和Downhole CPT实测数据之间的差异。在贯入深度较大时,Seabed CPT受排挤状态控制,而Downhole CPT仍然受滑动状态的影响。 相似文献
17.
Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles. 相似文献