共查询到18条相似文献，搜索用时 156 毫秒
1.
考虑场地土层不同物理参数的综合反演,改进了水平与竖向谱比(Horizontal-to-Vertical Spectral Ratio,简称HVSR)混合全局优化反演方法,进一步通过土层的S、P波波速、厚度、泊松比、密度和S、P波品质因子等土层参数反演的敏感性分析,形成了可同时反演场地土层厚度及剪切波速的混合全局优化反演方法.以美国GVDA和日本IWTH27竖向强震动观测台阵为例,分别以理论HVSR及加速度观测记录获得的HVSR曲线为目标,反演获得了场地浅层速度结构,并与观测台阵场地钻孔揭示的土层模型进行比较,验证了发展的反演方法的合理性和适用性.本文研究表明,基于地震加速度记录的HVSR全局优化反演方法是获取场地土层速度结构的一种有效的途径. 相似文献
2.
场地土层剪切波速测试不可避免会存在误差,误差达30%左右。目前,在对剪切波速误差对土层地震反应计算影响的研究中,设计波速误差或者设计土层模型的方式偏于理想化。为更接近现实情况,本文基于实测土层模型,用蒙特卡洛方法研究剪切波速误差对土层地震反应计算结果的影响。本文搜集并建立了均匀分布在山东地区的132个场地计算模型,涵盖了山东境内分布广泛的Ⅱ类场地和Ⅲ类场地。根据蒙特卡洛随机模拟原理,对每一场地计算模型,在实测剪切波速值30%的偏差范围内随机生成100组剪切波速值,分别进行土层地震反应计算,分析反应谱值、反应谱平台值和特征周期的变化。研究表明,30%以内的随机波速误差会导致某些周期处的反应谱的变化达30%以上,其对反应谱平台值最大的影响大多在10%~50%之间,对Ⅱ类场地特征周期的最大影响大多在0~50%之间,对Ⅲ类场地特征周期的最大影响大多在20%~90%之间。 相似文献
3.
利用水平与竖向谱比（HVSR）方法反演场地速度结构是国际上迅速发展的研究领域.HVSR反演计算实质是一个土层场地模型空间搜索的全局优化问题,当模型搜索空间的复杂程度增大时,目前常用的搜索算法收敛速度慢,计算效率较低.本文实现了一种结合遗传和模拟退火方法优点的混合全局优化HVSR反演算法,通过理论模型和竖向台阵实测数据的检验,表明该算法能获得很好的反演效果,较好地解决了蒙特卡罗方法收敛速度慢,遗传算法收敛早熟和模拟退火算法搜索效率低的问题.本文在此基础上讨论了单台加速度S波记录用于场地速度结构HVSR反演的适用性,为基于单个地震台的地震观测记录反演浅层速度结构提供了一种高效且较为准确的反演方法. 相似文献
4.
基于强震动观测台钻孔数据, 统计得到了四川、 甘肃地区20 m深的浅硬土层场地平均剪切波速模型． 通过与美国加州地区的波速模型对比, 结合四川、 甘肃地区地震预报的地壳模型, 延拓剪切波速模型至40 km． 应用四分之一波长法计算了浅硬土层场地的平均场地放大系数． 利用场地放大系数, 消除13次余震中浅硬场地的台站场地响应, 反演了龙门山断层上、 下盘的介质品质因子以及13次余震的有效应力降． 通过与普通土层场地的强震动记录对比, 对浅硬土层场地的放大系数进行调整, 得到了深厚土层场地的平均放大系数． 相似文献
5.
6.
7.
以Turkey Flat标准试验场为基准场地,以Toro剪切波速模型为基础,进行Monte Carlo模拟,生成剪切波速、层厚和密度随机样本各200条,将各土层随机参数组成4个工况作为不确定分析的基础。采用常用的四分之一波长法和传递函数法计算场地放大因子,分析放大因子以及特征周期对4种工况的敏感度。结果表明:土层剪切波速、层厚和密度的随机性对2种方法计算得到场地放大因子有相同的影响;剪切波速的随机性对放大因子和特征频率的影响比其他参数大;四分之一波长法得到的放大因子和特征频率对土层各参数的敏感性弱于传递函数方法。 相似文献
8.
提出一种用三分量检波器接收到的地脉动信号的水平向与垂直向（H／V）谱进行反演来估计地下土层S波速度（VS）剖面的方法。为此，推导出了计算层状半空间中传播的面波H／V谱的理论公式，并且同时考虑了基阶及高阶振型的影响。然后提出了一种用地脉动H／V谱估计地下土层S波速度剖面的反演分析方法。假设浅部土层的VS值或厚度已知，求其余未知量。在6个不同场地上对观测的地脉动H／V谱进行了反演分析，获得了场地的浅部S波速度剖面。该结果与这些场地上已有的速度测井资料相一致，它和反演值之间的标准误差小于0．1，最大误差为0．2。 相似文献
9.
10.
11.
用平面波延拓方程进行地震数据的叠前速度反演 总被引：1，自引：1，他引：1
本文讨论地震勘探数据的叠前速度反演方法及其在海洋地震勘探数据上的反演试验.反演主要的计算步骤是:1.采用Fourier-Hankel变换把球面波分解为平面谐波;2.用平面谐波的延拓方程将上行波与下行波同时向下延拓,并计算每一层底部的反射系数和下一层的波阻抗;3.用最小二乘法从波阻抗中确定该层的声波速度.重复第2步与第3步,直到某一预定深度时结束.通过反演试验,对地震振幅比例的改变,子波变形,以及第1层速度和密度的误差对反演方法的稳定性及其精度的影响进行了分析.还通过实际海洋地震勘探数据的反演试验,对这一方法在地震勘探中的应用前景作了论述. 相似文献
12.
J. F. Borges H. G. Silva R. J. G. Torres B. Caldeira M. Bezzeghoud J. A. Furtado J. Carvalho 《Journal of Seismology》2016,20(3):875-887
During its history, several significant earthquakes have shaken the Lower Tagus Valley (Portugal). These earthquakes were destructive; some strong earthquakes were produced by large ruptures in offshore structures located southwest of the Portuguese coastline, and other moderate earthquakes were produced by local faults. In recent years, several studies have successfully obtained strong-ground motion syntheses for the Lower Tagus Valley using the finite difference method. To confirm the velocity model of this sedimentary basin obtained from geophysical and geological data, we analysed the ambient seismic noise measurements by applying the horizontal to vertical spectral ratio (HVSR) method. This study reveals the dependence of the frequency and amplitude of the low-frequency (HVSR) peaks (0.2–2 Hz) on the sediment thickness. We have obtained the depth of the Cenozoic basement along a profile transversal to the basin by the inversion of these ratios, imposing constraints from seismic reflection, boreholes, seismic sounding and gravimetric and magnetic potentials. This technique enables us to improve the existing three-dimensional model of the Lower Tagus Valley structure. The improved model will be decisive for the improvement of strong motion predictions in the earthquake hazard analysis of this highly populated basin. The methodology discussed can be applied to any other sedimentary basin. 相似文献
13.
14.
Site engineering seismic survey provides basic data for seismic effect analysis. As an important parameter of soil, shear-wave velocity is usually obtained through wave velocity testing in borehole. In this paper, the passive source surface-wave method is introduced into the site engineering seismic survey and practically applied in an engineering site of Shijingshan District. By recording the ubiquitous weak vibration on the earth surface, extract the dispersion curve from the surface-wave components using the SPAC method and obtain the shear-wave velocity structure from inversion. Over the depth of 42 m underground, it totally consists of five layers with interface depth of 3.31, 4.50, 7.23, 17.41, and 42.00 m; and shear-wave velocity of 144.0, 198.3, 339.4, 744.2, and 903.7 m/s, respectively. The inversion result is used to evaluate site classification, determine the maximum shear modulus of soil, provide basis for further seismic hazard analysis and site assessment or site zoning, etc. The result shows that the passive source surface-wave method is feasible in the site engineering seismic survey and can replace boreholes, shorten survey period, and reduce engineering cost to some extent. 相似文献
15.
通过布置于龙门山断裂带中段、龙门山山前玉皇观区域的地震观测台站阵列接收地震数据,研究该区域的地震动放大效应和地下地质结构.观测阵列共10台宽频带地震仪,分布在玉皇观河口冲积扇区域.分别采用参考场址谱比法(RSSR)和HV谱比法(HVSR)计算64个高信噪比近震数据的振幅谱比函数,结果显示在玉皇观区域具有较明显的地震动放大效应,并且局部场址效应显著.以S06场址为例,建立近地表地震地质模型,通过SH波放大效应正演模拟研究该场址的地震动放大模式.RSSR与HVSR的结果表明,两者所计算的场址放大效应主频一致,但是HVSR的放大峰值却比RSSR的放大峰值大一倍左右,表明HVSR的结果可能包含了波场在近地表低速层之下传播路径的改造作用.另外,采用27个远震P波的接收函数计算了该区域地壳上地幔S波速度结构.接收函数研究结果显示玉皇观地区的莫霍面深度为44 km,沉积盖层、结晶地壳和上地幔的S波速度分别为2.5 km·s~(-1)、3.5 km·s~(-1)和4.5 km·s~(-1).观测阵列台站之间的接收函数反演结果一致性较好,说明本研究区域范围内地形地貌等近地表结构因素的相对变化对接收函数的影响不大. 相似文献
16.
APPLICATION AND STATISTICAL ANALYSIS OF RELATIONSHIP BETWEEN SHEAR WAVE VELOCITY AND DEPTH OF SOIL-LAYERS 
下载免费PDF全文
下载免费PDF全文 The shear wave velocity is one of the important parameters in seismic engineering.The common mathematical models of relationship between shear wave velocity and depth of soil-layers are linear function model,quadratic function model,power function model,cubic function model,and quartic function model.It is generally believed that the regression formulae based on aforementioned mathematical models are mainly used for preliminary estimation of the local shear wave velocity.In order to increase the value of test data of wave speed in boreholes,the calculation formulae for the thickness of ground cover layer are derived based on the aforementioned mathematical models and their fitting parameters.The calculation formulae for the mean shear wave velocity of soil-layers are derived by integral mean value theorem.Accordingly,the calculation formulae for the equivalent shear wave velocity of soil-layers are derived.The calculation formulae for the depth of reflective waves in time-depth conversion of the reflection seismic exploration are derived.Through the statistical analysis of test data of shear wave velocity of soil layers in Changyuan County,Henan Province,regression formulae and their fitting parameters of aforementioned mathematical models are obtained.The results show that in the determination of the quality of these regression formulae and their fitting parameters,the adjusted R-square,root mean square error and residual error,the matching on the statistical range between the geometry of function of mathematical models used and the scattergram of the measured data,the application purpose and the simplicity of the regression formulae should be considered.With the aforementioned new formulae,the results show that the calculated values of equivalent shear wave velocity of soil-layers and thickness of ground cover layer meet the engineering needs.The steps for statistics and applications of the relationship between shear wave velocity and depth of soil-layers for a new area are as follows:(1) Analyze the relevant data about the site such as the drilling and wave speed test data,etc.and divide the site into seismic engineering geological units;(2) In a single seismic engineering geological unit,make statistical analysis of the data of borehole wave speed test,comprehensively identify and select mathematical models and their fitting parameters of the relationship between shear wave velocity and depth of soil-layers;(3) Substitute the selected fitting parameters into the formulae,based on their mathematical models for the thickness of ground cover layer,or the equivalent shear wave velocity of soil-layers,or the depth of reflective wave,then the thickness of ground covering layer,equivalent shear wave velocity,and depth of reflective wave are obtained. 相似文献
17.
The local geology and shallow S-wave velocity structure of a site are recognized to be key factors for the increase in the damaging potential of seismic waves. Indeed, seismic amplitudes may be amplified in frequency ranges unfavorable for building stock by the presence of soft sedimentary covers over lying hard bedrock. Hence, microzonation activities, which aim at assessing the site response as accurately as possible, have become a fundamental task for the seismic risk reduction of urbanized areas. Methods based on the measurement of seismic noise, which typically are fast, non-invasive, and low cost, have become a very attractive option in microzonation studies.Using observations derived from seismic noise recordings collected by two-dimensional arrays of seismic stations, we present a novel joint inversion scheme for surface wave curves. In particular, the Love wave, the Rayleigh wave dispersion and the HVSR curves are innovatively combined in a joint inversion procedure carried out following a global search approach (i.e., the Genetic Algorithm).The procedure is tested using a data set of seismic noise recordings collected at the Bevagna (Italy) test-site. The results of the novel inversion scheme are compared with the inversion scheme proposed by Parolai et al. (2005), where only Rayleigh wave dispersion and HVSR curves are used, and with a cross-hole survey. 相似文献
18.
针对鄂尔多斯盆地西缘黄土塬区复杂地表和复杂地下构造导致难以准确成像问题,采用浅层潜水波层析反演（DWT）速度建模技术,同时辅以中深层反射波层析成像技术,形成一套实用叠前深度偏移速度建模方法。首先生成一个基于钻井和解释信息的起始近地表速度,其次利用潜水波层析反演建立初始近地表模型,将其与常规处理获得的中深层速度模型进行匹配拼接,建立起初始的起伏地表全速度模型,然后在此基础上利用基于反射波的网格层析进行中深层速度建模,经过多轮次迭代,最终获得可靠的高精度速度模型。鄂尔多斯盆地西缘MJT工区地震资料的成像处理验证了这一套速度建模技术的有效性,地下构造成像更合理也更精确。 相似文献