首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 671 毫秒
1.
The provenance of Cenomanian to Eocene flysch deposits accreted along the northern margin of the Eastern Alps has been investigated by means of zircon fission-track (FT) geochronology and zircon morphology. The Rhenodanubian flysch and Ybbsitz klippen zone comprise several nappes representing the Main flysch and Laab basins. The Laab basin received sediments of stable European provenance, indicated by pre-Variscan, Variscan, and Permian–Triassic zircon FT ages, and was thus located in the immediate south of the European margin. The Main flysch basin was supplied mainly from the evolving Eastern Alps and was therefore situated south of the Laab basin. Zircon populations with Permian to Jurassic cooling ages in the Main flysch basin are related to increased heat fluxes during the break-up of Pangaea and are probably derived from the northwestern part of the Eastern Alps. The dominant Cretaceous zircon FT cooling ages reflect Eoalpine metamorphism in the Austroalpine realm.  相似文献   

2.
Geometrical relations between quartz C-axis fabrics, textures, microstructures and macroscopic structural elements (foliation, lineation, folds…) in mylonitic shear zones suggest that the C-axis fabric mostly reflects the late-stage deformation history. Three examples of mylonitic thrust zones are presented: the Eastern Alps, where the direction of shearing inferred from the quartz fabric results from a late deformation oblique to the overall thrusting; the Caledonides nappes and the Himalayan Main Central Thrust zone, where, through a similar reasoning, the fabrics would also reflect late strain increments though the direction of shearing deduced from quartz fabric remains parallel to the overall thrusting direction. Hence, the sense of shear and the shear strain component deduced from the orientation of C-axis girdles relative to the finite strain ellipsoid axes are not simply related nor representative of the entire deformation history.  相似文献   

3.
Eclogites in the Texel Unit (Eastern Alps; South Tyrol, Italy) represent the westernmost outcrops of the E–W striking Eoalpine High‐Pressure Belt (EHB). East of the Tauern Window, the EHB forms part of a Cretaceous intracontinental south‐dipping subduction/collision zone; however, the same nappe stack displays a northwest dip at its western end. This prominent change in dip direction gave rise to discussions on the general setting of the Eoalpine collision. Based on our own observations and literature data, we present a new tectonic model for the western end of the EHB. Due to the special situation of this area at the tip of the Southalpine indenter, originally south(east) dipping structures became overturned, and former thrusts appear as normal faults (e.g. Schneeberg fault zone) while former normal faults presently display thrust geometries (e.g. Jaufen fault). Thus, we explain the current configuration with a coherent Eoalpine subduction direction.  相似文献   

4.
Changes in deformation mechanism coupled with spatial and temporal variations in reaction rates can result in preservation of disequilibrium mineral compositions in rocks affected by synmetamorphic shearing. Thermobarometric calculations on such rocks may thus yield meaningless results. We use Garbenschiefer samples from a shear zone in the Eastern Alps to study the effects of different deformational processes on calculated pressures and temperatures in samples that experienced the same overall PTt history. We focus on plagioclase, which accommodates strain by a variety of deformation mechanisms and is a key mineral in many thermobarometers. Plagioclase that deformed largely via dislocation creep mechanisms shows concentric chemical zoning, whereas plagioclase that experienced dissolution-precipitation creep preserves complex zoning. Rim compositions in the latter domains are not necessarily the youngest compositions, nor did they typically equilibrate with other phases in the assemblage. The timing of hornblende breakdown reactions relative to changes in plagioclase deformation mechanism also affected chemical zoning. Samples that escaped shear strain while near the thermal maximum yield internally consistent thermobarometric results, whereas samples that experienced shearing near the thermal maximum yield scattered results. Some of the variability in the results likely represents real differences in the P–T conditions at which equilibration occurred during deformation. However, much of the variability represents spurious results obtained by pairing mineral compositions that were never in equilibrium with one another. Extraction of useful P–T information from samples that experienced synmetamorphic deformation requires careful documentation of the relationships between deformation mechanisms and chemical zoning in order to select appropriate mineral compositions for thermobarometric calculations.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.  相似文献   

5.
Stratabound tungsten mineralization in regional metamorphic calc-silicate rocks of probably Lower Paleozoic age is described from the polymetamorphic Austroalpine Crystalline Complex (ACC) of the Eastern Alps. Scheelite-bearing calc-silicate rocks which are often associated with marbles and tourmalinites are intercalated conformably with metaclastic rocks. Alkalipoor calc-silicate rocks with high amounts of clinozoisite/ zoisite, grossular, quartz, plagioclase, etc. are the most important host rocks for tungsten mineralization. These unusual calc-silicate rocks are products of regional metaorphism and are interpreted as reaction skarns. They have formed in the presence of a water-dominated fluid phase with very low XCO2.In the Koralpe estimated P-T conditions are 650–700 °C at 5–7 kb. The mineralogical composition and the mineral zoning of the calc-silicate rocks is controlled by the degree of the Hercynian and Eoalpine metamorphism. There are no signs of graniteelated skarn formation. Tungsten preconcentration is thought to be syngenetic/syndiagenetic. It is genetically linked to exhalative hydrothermal processes in other Lower Paleozoic terrains of the Eastern Alps.  相似文献   

6.
The so‐called Plankogel detachment is an east‐west trending, south‐dipping low‐angle structure that juxtaposes the high‐P rocks of the eclogite type locality of the eastern European Alps against amphibolite facies rocks to the south. It occurs in both the Saualpe and Koralpe Complex in eastern Austria. During Cretaceous intracontinental subduction, the footwall and the hangingwall units of the Plankogel detachment were buried to different crustal levels as inferred by pseudosection modelling and conventional thermobarometry: ~23–24 kbar and 640–690 °C for the eclogite facies units in the footwall of the detachment and ~12–14 kbar and 550–580 °C for the amphibolite facies metapelites in the hangingwall. Despite the different peak metamorphic conditions, both sides of the detachment display a common overprint at conditions of ~10 kbar and 580–650 °C. From this, we infer a two‐stage exhumation process and suggest that this two‐stage process is best interpreted tectonically in terms of slab extraction during Eoalpine subduction. The first stage of exhumation occurred due to the downward (southward) extraction of a lithospheric slab that was localized in the trace of the Plankogel detachment. The later stage, however, is attributed to more regional erosion‐ or extension‐driven processes. Since the Plankogel detachment is geometrically related to a crustal‐scale shear zone further north (the Plattengneiss shear zone), we suggest that both structures are part of the same extraction fault system along which the syn‐collisional exhumation of the Eoalpine high‐P units of the Eastern Alps occurred. The suggested model is consistent with both the mylonitic texture of the Plattengneiss shear zone and the overall ambiguous shear sense indicators present in the entire region.  相似文献   

7.
Monometamorphic metasediments of Paleozoic or Mesozoic age constituting Schneeberg and Radenthein Complex experienced coherent deformation and metamorphism during Late Cretaceous times. Both complexes are part of the Eoalpine high-pressure wedge that formed an intracontinental suture and occur between the polymetamorphosed Ötztal–Bundschuh nappe system on top and the Texel–Millstatt Complex below. During Eoalpine orogeny Schneeberg and Radenthein Complexes were south-dipping and they experienced a common tectonometamorphic history from ca. 115 Ma onwards until unroofing of the Tauern Window in Miocene times. This evolution is subdivided into four distinct tectonometamorphic phases. Deformation stage D1 is characterized by WNW-directed shearing at high temperature conditions (550–600°C) and related to the initial exhumation of the high-pressure wedge. D2 and D3 are largely coaxial and evolved during high- to medium-temperature conditions (ca. 450 to ≥550°C). These stages are related to advanced exhumation and associated with large-scale folding of the high-pressure wedge including the Ötztal-Bundschuh nappe system above and the Texel–Millstatt Complex below. For the area west of the Tauern Window, F2/F3 fold interference results in the formation of large-scale sheath-folds in the frontal part of the nappe stack (formerly called “Schlingentektonik” by previous authors). Earlier thrusts were reactivated during Late Cretaceous normal faulting at the base of the Ötztal–Bundschuh nappe system and its cover. Deformation stage D4 is of Oligo-Miocene age and accounted for tilting of individual basement blocks along large-scale strike-slip shear zones. This tilting phase resulted from indentation of the Southern Alps accompanied by the formation of the Tauern Window.  相似文献   

8.
The Helvetic nappes of western Switzerland are discussed as an example of an arcuate foreland fold- and thrust belt in which active fold-axis parallel stretching occurred. Fold-axis parallel extension is recorded by:

1. (1) Incremental strain data from pressure shadow fibres. The significance of pressure shadow fibres for the determination of the deformation history of a region is discussed. Pressure shadows are used to quantify the amount of, and to describe the distribution of fold-axis parallel extension occurring in the Helvetic nappes.

2. (2) The extension directions of conjugate systems of en échelon veins. It is shown that an analysis of the geometry of conjugate vein systems can reveal a regional deformation pattern. The relative age of the conjugate en échelon vein systems in the Helvetic deformation history can be assessed, the geometry of the conjugate sets relative to the local anisotropy plane is described, and the significance of the preferred orientation of their extension directions is discussed.

3. (3) Fold-axis parallel sections. A comparison of the regional distribution of the fold-axis parallel strain with the shape of the Helvetic nappes in fold-axis parallel sections shows that the fold-axis parallel strain cannot be related to the footwall topography of the nappes.

It is concluded that the fold-axis parallel extension in the Helvetic nappes was induced by a change of direction of overthrust shear. This change occurred late in the deformation history and was superposed on the already formed nappes. The changing direction of overthrust shear is the expression of an overall anticlockwise rotation going on in the overthrusting Alpine nappe pile, relative to the European plate, a rotation which lead to the arcuate shape of the Western Alps.  相似文献   


9.
Abstract The Hercynian granitic basement which forms the Tenda Massif in NE Corsica represents part of the leading edge of the European Plate during middle-to-late Cretaceous (Eoalpine) high P metamorphism. The metamorphism of this basement, induced by the overthrusting of a blueschist facies (schistes lustrés) nappe, was confined to a major ductile shear zone (c. 1000m thick) within which deformation increases upwards towards the overlying nappe. Metamorphism within the basement mostly records lower blueschist facies conditions (crossite + epidote) except near the base of the shear zone where the greenschist facies assemblage albite + actinolitic amphibole has developed instead of crossite. Study of the primary mafic phase breakdown reactions within hornblende granodiorite reveals the following metamorphic zonation. Zone 1: biotite to chlorite. Towards zone 2: biotite to phengite. Zone 2: Hornblende to actinolitic Ca-amphibole + albite + sphene, and biotite to actinolitic Ca-amphibole + albite + phengite + Ti-ore + epidote. Zone 3: Hornblende to crossite + low Ti-biotite + phengite + sphene, and biotite to crossite + low Ti-biotite + phengite + Ti-ore + sphene ± epidote. P-T conditions at the base of the shear zone are estimated to have been 390-490°C at 600-900 M Pa (6-9kbar) and the Corsican basement is therefore deduced to have been buried to 20-30 km during metamorphism. This relatively shallow metamorphism contrasts with some other areas in the Western Alps where the Eoalpine event apparently buried the European continental crust to depths of 80 km or more. As there is no evidence for a long history of blueschist facies metamorphism prior to the involvement of the European continent, it is deduced that the Eoalpine blueschists were produced during the collision of the Insubric plate with Europe, rather than during Tethyan intraoceanic subduction. Coherent blueschist terrains such as the schistes lustres probably record buovant feature collision and obduction tectonics rather than any preceding oceanic subduction.  相似文献   

10.
High-pressure rocks of the eclogite zone (Tauern Window, Eastern Alps) formed at 20 kb/600°C. Uplift was fast without post-burial heating. Extensive near-field and far-field deformation of the eclogite zone and its surroundings provide evidence for a tectonic uplift mechanism. Published emplacement models (buoyant rise, underplating and extension, wrench faulting) create distinct patterns of crustal deformation, and are therefore testable by structural analysis. We show that emplacement-related deformation and its kinematics are consistent with underplating and extension. Extension is two-phased. The first phase may be driven by changes in rate or direction of plate convergence. The second phase is due to large-scale underplating of continental crust.  相似文献   

11.
This study is essentially based on coupling macrostructures, microstructures and metamorphic petrology in polymetamorphic mafic rocks from the Swiss Eastern Alps (Suretta nappe, Penninic domain). Petrographic criteria are used in conjunction with structural analysis and microprobe work to define crystallization/deformation relationships and to establish a relative but precise sequence of tectono-metamorphic events. A first eclogite facies overprint and related exhumation occurred before emplacement of late Palaeozoic intrusives. During the Alpine cycle, the Suretta nappe was part of the thinned European continental margin. The Tertiary burial due to subduction and collision is responsible for D1 ductile thrusting and blueschist facies metamorphism. Late deformation phases, related to exhumation, are responsible for the development of extensional structures under greenschist facies conditions. Quantitative metamorphic petrology based on Gibbs free energy minimization (DOMINO by de Capitani) gives a constraint on the P–T  conditions during the polymetamorphic and polycyclic evolution. The first high- P metamorphic event related to pre-Alpine structures occurred at c . 700  °C and at least 2.0  GPa. These conditions are compatible with pre-Alpine high- P re-equilibration already described in several Alpine units. The Alpine high- P metamorphism occurred under blueschist facies conditions at c . 400–450  °C and 1.0  GPa. Similar high- P , low- T  conditions have already been described in the Mesozoic and Permian rock types. The two high- P events are clearly related to two different geothermal regimes and geodynamic environments.  相似文献   

12.
The Sr isotopic composition of sediment-hosted magnesites in Permian and Scythian series of Upper Austroalpine units (Eastern Alps) has been determined. The results suggest diagenetic-metasomatic magnesite formation by Mg-rich pore solutions. The depositional environment of the magnesite-bearing rocks is reflected by different isotopic compositions with initial 87Sr/86Sr ratios close to contemporaneous sea water in marine sediments (0.7071–0.7083) and higher ratios being typical for lacustrine and coastal environments influenced from the hinterland (0.7133–0.7139). Coarser grained recrystallized magnesite and magnesite veins show a distinct increase in their Sr isotopic ratios (0.7202–0.7220) which can be attributed to metamorphic fluids of Eoalpine age. The findings of these magnesite occurrences, which have been affected only by very low-grade metamorphism, are compared with similar results from spar magnesites associated with metamorphosed Paleozoic sedimentary rocks. A similar genetic model is proposed for the first magnesite mineralization in those Paleozoic strata, but with variably intense later recrystallisation during metamorphism.  相似文献   

13.
We model the development of shape preferred orientation (SPO) of a large population of two- and three-dimensional (2D and 3D) rigid clasts suspended in a linear viscous matrix deformed by superposed steady and continuously non-steady plane strain flows to investigate the sensitivity of clasts to changing boundary conditions during a single or superposed deformation events. Resultant clast SPOs are compared to one developed by an identical initial population that experienced a steady flow history of constant kinematic vorticity and reached an identical finite strain state, allowing examination of SPO sensitivity to deformation path. Rotation paths of individual triaxial inclusions are complex, even for steady plane strain flow histories. It has been suggested that the 3D nature of the system renders predictions based on 2D models inadequate for applied clast-based kinematic vorticity gauges. We demonstrate that for a large population of clasts, simplification to a 2D model does provide a good approximation to the SPO predicted by full 3D analysis for steady and non-steady plane strain deformation paths. Predictions of shape fabric development from 2D models are not only qualitatively similar to the more complex 3D analysis, but they display the same limitations of techniques based on clast SPO commonly used as a quantitative kinematic vorticity gauge. Our model results from steady, superposed, and non-steady flow histories with a significant pure shearing component at a wide range of finite strain resemble predictions for an identical initial population that experienced a single steady simple shearing deformation. We conclude that individual 2D and 3D clasts respond instantaneously to changes in boundary conditions, however, in aggregate, the SPO of a population of rigid inclusions does not reflect the late-stage kinematics of deformation, nor is it an indicator of the unique ‘mean’ kinematic vorticity experienced by a deformed rock volume.  相似文献   

14.
The Gradenbach mass movement (GMM) is an example of DGSD (deep-seated gravitational slope deformation) in crystalline rocks of the Eastern Alps (12.85°E, 47.00°N). The main body of the GMM covers an area of 1.7 km2 and its volume is about 120?×?106 m3. A reconstruction of the deformation history yields a mean displacement of?～?22 m from 1962 to 2011. In 1965/66, 1975, 2001, and 2009 high sliding velocities, exceeding several meters per year, interrupt the quasi-stationary periods of slow movement (≤0.3 m/year). Since 1999 the displacement of the main body of the GMM has been observed by GPS. Time series of extensometer readings, precipitation, snow cover water equivalent, water discharge, and hydrostatic water level observed in boreholes were re-processed and are presented in this paper. Continuous recording of seismic activity by a seismic monitoring network at the GMM began in the summer of 2006. Deformation has been monitored since 2007 by an embedded strain rosette based on fiber optics technology and a local conventional geodetic deformation network. The velocity of the GMM could be modeled to a large extent by a quantitative relation to hydro-meteorological data. During the phase of high sliding velocity in spring 2009, the seismic activity in the area increased significantly. Several types of seismic events were identified with some of them preceding the acceleration of the main body by about 6 weeks. The potential inherent in the Gradenbach Observatory data to supply early warning and hazard estimation is discussed.  相似文献   

15.
Balancing lateral orogenic float of the Eastern Alps   总被引：2，自引：0，他引：2  
Oligocene to Miocene post-collisional shortening between the Adriatic and European plates was compensated by frontal thrusting onto the Molasse foreland basin and by contemporaneous lateral wedging of the Austroalpine upper plate. Balancing of the upper plate shortening by horizontal retrodeformation of lateral escaping and extruding wedges of the Austroalpine lid enables an evaluation of the total post-collisional deformation of the hangingwall plate. Quantification of the north–south shortening and east–west extension of the upper plate is derived from displacement data of major faults that dissect the Austroalpine wedges. Indentation of the South Alpine unit corresponds to 64 km north–south shortening and a minimum of 120 km of east–west extension. Lateral wedging affected the Eastern Alps east of the Giudicarie fault. West of the Giudicarie fault, north–south shortening was compensated by 50 to 80 km of backthrusting in the Lombardian thrust system of the Southern Alps. The main structures that bound the escaping wedges to the north are the Inntal fault system (ca. 50 km sinistral offset), the Königsee–Lammertal–Traunsee (KLT) fault (10 km) and the Salzach–Ennstal–Mariazell–Puchberg (SEMP) fault system (60 km). These faults, as well as a number of minor faults with displacements less than 10 km, root in the basal detachment of the Alps. The thin-skinned nature of lateral escape-related structures north of the SEMP line is documented by industry reflection seismic lines crossing the Northern Calcareous Alps (NCA) and the frontal thrust of the Eastern Alps. Complex triangle zones with passive roof backthrusts of Middle Miocene Molasse sediments formed in front of the laterally escaping wedges of the northern Eastern Alps. The aim of this paper is a semiquantitative reconstruction of the upper plate of the Eastern Alps. Most of the data is published elsewhere.  相似文献   

16.
The late‐Neogene evolution of the European Alps was influenced by both tectonic and climatically driven erosion processes, which are difficult to disentangle. We use low‐temperature thermochronometry data from surface and borehole samples in the Aar massif–Rhône valley (Swiss central Alps) to constrain the exhumation history of the region. Multiple exhumation events are distinguished and linked to regional‐scale tectonic deformation (before 5 Ma), short‐lived climatically driven orogen contraction (between 4 and 3 Ma), and glacial valley carving since c. 1 Ma. Compared with previous studies, we clearly show the existence of two separate exhumation phases in the Late Miocene–Pliocene and better constrain the onset of glacial valley carving. The hydrothermal activity and geothermal anomalies currently observed in the borehole have been local and short‐lived, with only a minor influence on thermochronometric observations. We thus suggest that late‐stage glacial valley carving may have triggered topography‐driven fluid flow and transient hydrothermal circulation.  相似文献   

17.
Late Jurassic formations of the Northern Calcareous Alps (NCA) contain ample evidence of synsedimentary tectonics in the form of elongate basins filled with turbidites, debris flows and slumps. Clasts are derived from the Mesozoic of the NCA; they commonly measure tens of metres in diameter and occasionally form kilometre-size bodies. These sedimentologic observations and the presumed evidence of Late Jurassic high-pressure metamorphism recently led to the hypothesis of a south-dipping Jurassic subduction zone with accretionary wedge in the southern parts of the NCA. We present new 40Ar/39Ar dates from the location of the postulated high-pressure metamorphism that bracket the age of this crystallization not earlier than 114–120 Ma. The event is therefore part of the well-documented mid-Cretaceous metamorphism of the Austro-alpine domain. Thus, there is currently no evidence of Late Jurassic high-pressure metamorphism to support the subduction hypothesis. The sediment record of the Late Jurassic deformation in the NCA, including the formation of local thrust sheets, is no conclusive evidence for subduction. All these phenomena are perfectly compatible with synsedimentary strike-slip tectonics. Large strike-slip fault zones with restraining and releasing bends and associated flower structures and pull-apart basins are a perfectly viable alternative to the subduction model for the Late Jurassic history of the NCA. However, in contrast to the Eastern Alps transect, where arguments for a Jurassic subduction are missing, a glaucophane bearing Jurassic high-pressure metamorphism in the Meliatic realm of the West Carpathians is well documented. There, the high-pressure/low-temperature slices occur between the Gemeric unit and the Silica nappe system (including the Aggtelek-Rudabanya units), which corresponds in facies with the Juvavic units in the southern part of the NCA. To solve the contrasting palaeogeographic reconstructions we propose that the upper Jurassic left lateral strike-slip system proposed here for the Eastern Alps continued eastwards and caused the eastward displacement of the Silica units into the Meliatic accretionary wedge.  相似文献   

18.
Abstract

The western margin of the Tauera Window (Eastern Alps) is defined by a low angle westward dipping fault zone of potently We disp lacement. Ductile deformation of the fault rocks results in a carpet of mylonites up to 400 metres thick. Evidence from shear criteria and the excision of part of the Cretaceous-Tertiary metamorphic edifice both indicate normal displacements, and relative movement of Austroalpine nappe complex towards the west. The Sterzing-Steinach mylonite zone overprints the Alpine nappe edifice. Movements occurred on the cooling path of the Tauern metamorphism, and may be as recent as Middle Miocene.

The Kinematics and geometry of the mylonite zone constrain two likely t ectonic explanations that are both compatible with secondary thining of a thick orogenic wedge. (1) Ute the Austroalpine nappe pile due to tectonic unroofing of the Tauern window. (2) Continental escape by east-west stretching of the Alpine orogenic wedge in response to continental collision.  相似文献   

19.
A numerical modelling approach is used to validate the physical and geological reliability of the ablative subduction mechanism during Alpine convergence in order to interpret the tectonic and metamorphic evolution of an inner portion of the Alpine belt: the Austroalpine Domain. The model predictions and the natural data for the Austroalpine of the Western Alps agree very well in terms of P–T peak conditions, relative chronology of peak and exhumation events, P–T–t paths, thermal gradients and the tectonic evolution of the continental rocks. These findings suggest that a pre‐collisional evolution of this domain, with the burial of the continental rocks (induced by ablative subduction of the overriding Adria plate) and their exhumation (driven by an upwelling flow generated in a hydrated mantle wedge) could be a valid mechanism that reproduces the actual tectono‐metamorphic configuration of this part of the Alps. There is less agreement between the model predictions and the natural data for the Austroalpine of the Central‐Eastern Alps. Based on the natural data available in the literature, a critical discussion of the other proposed mechanisms is presented, and additional geological factors that should be considered within the numerical model are suggested to improve the fitting to the numerical results; these factors include variations in the continental and/or oceanic thickness, variation of the subduction rate and/or slab dip, the initial thermal state of the passive margin, the occurrence of continental collision and an oblique convergence.  相似文献   

20.
The Rodna Mountains afford the most internal structural window into the crystalline units of the Eastern Carpathians in Romania. The Rodna Mountains consist of Variscan metamorphic nappes that were restacked in the Alpine phase of Carpathian development forming the Subbucovinian and Infrabucovinian nappes. In order to evaluate age of deformation, ten samples were taken from the zone of greenschist facies mylonitic schist that marks the Alpine tectonic boundary between the Subbucovinian and Infrabucovinian nappes and 40Ar/39Ar laser single-grain ages determined for schistosity-forming muscovite. Microstructural assessment of quartz and muscovite distinguished two deformation events. Single-grain ages from the microstructurally most strongly reworked samples (four samples) give a tight clustering of ages at ca. 95 Ma. The least reworked schists have a broader clustering of ages spanning ca. 200–280 Ma with a late Permian peak and some samples showing outlier ages in the range 200–100 Ma. The relative development of the outliers, which correlates with evidence for increased microstructural reworking, is interpreted to mark progressive isotopic resetting. The ca. 95 Ma ages for the most reworked schists are estimates for the age of the Alpine nappe stacking. The ca. 200–280 Ma ages are similar to those of magmatism, metamorphism, and sedimentation thought to mark post-Variscan-pre-Alpine rifting and ocean basin formation in parts of the Alps and may be the thermal imprint of a related event in the Eastern Carpathians.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号