首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south Shmax in magnitude until it is less than Sv, at which point Sv becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension.  相似文献   

2.
Fault rocks from various segments of the Periadriatic fault system (PAF; Alps) have been directly dated using texturally controlled Rb-Sr microsampling dating applied to mylonites, and both stepwise-heating and laser-ablation 40Ar/39Ar dating applied to pseudotachylytes. The new fault ages place better constraints on tectonic models proposed for the PAF, particularly in its central sector. Along the North Giudicarie fault, Oligocene (E)SE-directed thrusting (29-32 Ma) is currently best explained as accommodation across a cogenetic restraining bend within the Oligocene dextral Tonale-Pustertal fault system. In this case, the limited jump in metamorphic grade observed across the North Giudicarie fault restricts the dextral displacement along the kinematically linked Tonale fault to ~30 km. Dextral displacement between the Tonale and Pustertal faults cannot be transferred via the Peio fault because of both Late Cretaceous fault ages (74-67 Ma) and sinistral transtensive fault kinematics. In combination with other pseudotachylyte ages (62-58 Ma), widespread Late Cretaceous-Paleocene extension is established within the Austroalpine unit, coeval with sedimentation of Gosau Group sediments. Early Miocene pseudotachylyte ages (22-16 Ma) from the Tonale, Pustertal, Jaufen and Passeier faults argue for a period of enhanced fault activity contemporaneous with lateral extrusion of the Eastern Alps. This event coincides with exhumation of the Penninic units and contemporaneous sedimentation within fault-bound basins.  相似文献   

3.
Data supporting relevant Late Cretaceous–Early Eocene sinistral displacement along the Giudicarie fault zone and a minor Neogene dextral displacement along the Periadriatic lineament are discussed. The pre-Adamello structural belt is present only in the internal Lombardy zone, located W of the Adamello massif. This belt is unknown in the Dolomites and surrounding areas located to the E of the Giudicarie lineament. Upper Cretaceous–Early Eocene thick syntectonic Flysch deposits of Lombardy and Giudicarie are well preserved along the southern and eastern border of the pre-Adamello belt (S-vergent Alpine orogen). Towards the E, in the Dolomites and in the Carnic Alps and external Dinarides, only incomplete remnants of Flysch deposits, Aptian–Albian and Turonian–Maastrichtian in age, are present. They can be considered as equivalent to those of Lombardy and Giudicarie formerly in connection to each other along the N-Giudicarie corridor. To the S, the syntectonic Flysch deposits are laterally replaced by the calcareous red pelagites of the Scaglia Rossa and by the carbonate shelf deposits of the Friuli (to the E) and Bagnolo (to the S) carbonate platforms. The different location in the southern structural accretion of the eastern and western opposite blocks (the Dolomites versus the pre-Adamello belt) can be related to the Cretaceous–Eocene convergence. In this frame, the N-Giudicarie fault has been considered as part of a former transfer zone, which produced the sinistral lateral displacement of the Southern Alps front for an amount of some 50 km. During the Late Eocene to Early Oligocene the transfer zone was mostly sealed by the Paleogene Adamello batholith. Oligocene to Neogene compressional evolution inverted the N-Giudicarie fault into a backthrust of the Austroalpine units over the South-Alpine chain.  相似文献   

4.
The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria.  相似文献   

5.
The Schlinig fault at the western border of theÖtztal nappe (Eastern Alps), previously interpreted as a west-directed thrust, actually represents a Late Cretaceous, top-SE to -ESE normal fault, as indicated by sense-of-shear criteria found within cataclasites and greenschist-facies mylonites. Normal faulting postdated and offset an earlier, Cretaceous-age, west-directed thrust at the base of theÖtztal nappe. Shape fabric and crystallographic preferred orientation in completely recrystallized quartz layers in a mylonite from the Schlinig fault record a combination of (1) top-east-southeast simple shear during Late Cretaceous normal faulting, and (2) later north-northeast-directed shortening during the Early Tertiary, also recorded by open folds on the outcrop and map scale. Offset of the basal thrust of theÖtztal nappe across the Schlinig fault indicates a normal displacement of 17 km. The fault was initiated with a dip angle of 10° to 15° (low-angle normal fault). Domino-style extension of the competent Late Triassic Hauptdolomit in the footwall was kinematically linked to normal faulting.

The Schlinig fault belongs to a system of east- to southeast-dipping normal faults which accommodated severe stretching of the Alpine orogen during the Late Cretaceous. The slip direction of extensional faults often parallels the direction of earlier thrusting (top-W to top-NW), only the slip sense is reversed and the normal faults are slightly steeper than the thrusts. In the western Austroalpine nappes, extension started at about 80 Ma and was coeval with subduction of Piemont-Ligurian oceanic lithosphere and continental fragments farther west. The extensional episode led to the formation of Austroalpine Gosau basins with fluviatile to deep-marine sediments. West-directed rollback of an east-dipping Piemont-Ligurian subduction zone is proposed to have caused this stretching in the upper plate.  相似文献   


6.
E. Carminati  G.B. Siletto   《Tectonophysics》2005,401(3-4):179-197
The internal sectors of the Orobic Alps (Northern Italy) are characterised by Alpine age regional shortening showing a transition, through time, from plastic to brittle deformation. Thrust faults cut Alpine ductile folds and are marked by cataclasites and, locally, by pseudotachylytes, suggesting that motion was accommodated by seismic frictional slip. In the Eastern Orobic Alps the thrusting initiated at depths deeper than 10 km (the emplacement depth of the Adamello pluton) and possibly continued at shallower depths. This demonstrates that thrust motion occurred between 10 km depth and the brittle-ductile transition, i.e., at mid-crustal depths. The Orobic Alps exhumed paleoseismic zone shows different geometries along strike. In the central sectors of the Orobic Alps, thrust faults, associated with pseudotachylytes, have average dips around 40° and show no pervasive veining. Much steeper thrusts (dips up to about 85°) occur in the eastern Orobic Alps. In this area, faults are not associated with pervasive veining, i.e., fluid circulation was relatively scarce. This suggests that faulting did not occur with supralithostatic fluid pressure conditions. These reverse faults are severely misoriented (far too steep) for fault reactivation in a sublithostatic fluid pressure regime. We suggest that thrust motion likely started when the faults were less steep and that the faults were progressively rotated up to the present day dips. Domino tilting is probably responsible for this subsequent fault steepening, as suggested by a decrease of the steepness of thrust faults from north to south and by systematic rotations of previous structures consistently with tilting of thrust blocks. When the faults became inclined beyond the fault lock-up angle, no further thrusting was accommodated along them. At later stages regional shortening was accommodated by newly formed lower angle shear planes (dipping around 30–40°), consistently with predictions from fault mechanics.  相似文献   

7.
Cross-line recording formed a companion experiment of the TRANSALP seismic reflection transect through the Eastern Alps, conducted by partner institutions from Austria, Germany and Italy in three field campaigns in the period fall 1998 to fall 1999. Besides of the originally expected three-dimensional control for the north–south running main transect, additional information on seismic anisotropy and alternative images of crucial parts of the main transect could be gained.Conventionally processed sections along N–S running common-midpoint (CMP) binning lines confirm and strengthen the predominance of midcrustal reflective structures of the ‘Sub-Tauern-Ramp’ beneath and south of the Tauern Window. Velocity analysis of the first arrivals exhibit about 10% higher velocities in east–west propagating P-waves, compatible with texture-dominated rock anisotropy, recorded on cross-lines at the Tauern Window. Pre-stack depth migration of cross-line recordings shows dominant south dip of the Sub-Tauern-Ramp with easterly dip components and a sub-horizontal root zone of the Sub-Dolomites-Ramp.  相似文献   

8.
The Northern Calcareous Alps (NCA) are the site of very large top-to-north convergent movements during Cretaceous–Tertiary Alpine mountain building. To determine the amount of shortening, the depth of detachment and the style of deformation, we retro-deformed an approximately 40 × 40 km area comprising the Lechtal and Allgäu Nappes. On the basis of all available geological data and processed sections of the TRANSALP reflection seismic experiment, coherent 3D models were constructed by splining lines from N–S cross-sections. Integration of 3D kinematic modeling and field data shows the following. The structure of the Lechtal Nappe is controlled by the Triassic Hauptdolomit. Four main thrusts link to a detachment at 2–6 km depth below sea level. Shortening estimates vary, from 25% (east) to 42% (west). Additional contraction is accommodated by folding. In the east the subjacent Allgäu Nappe can be traced about 10 km down-plunge, and is shortened by about one third. In the western part the downplunge width is at least 15–20 km, with restorable shortening of one third. The triple (Inntal, Lechtal, Allgäu Nappes) NCA nappe system was moved uniformly N–S to produce laterally heterogeneus shortening of 40–90 km or 50–67%. We suggest that the NCA are underlain by substantial amounts of buried Molasse sediments and/or overthrust units of Helvetic and Rheno-Danubian Flysch, indicating post-Eocene N–S shortening of at least 55 km. Restored to an initial configuration, the basin topography of the NCA reveals strong E–W thickness variations of the Triassic Wettersteinkalk and Hauptdolomit platform carbonates. Such variations may pertain to N–S trending growth faults, which were important precursors to later Jurassic extension of the Austroalpine passive margin. Such structures are unlikely to be seen in the conventional N–S cross-sections, but form an essential geometrical and mechanical element in later, convergent mountain building.  相似文献   

9.
The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km2 in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.  相似文献   

10.
The TRANSALP Group, comprising of partner institutions from Italy, Austria and Germany, acquired data on a 340 km long deep seismic reflection line crossing the Eastern Alps between Munich and Venice. Although the field work was split into four campaigns, between fall 1998 and summer 2001, the project gathered for the first time a continuous profile across the Alps using consistent field acquisition and data processing parameters. These sections span the orogen itself, at its broadest width, as well as the editor Fred Davey and the two adjacent basins. Vibroseis and explosion data, complementary in their depth penetration and resolution characteristics, were obtained along with wide-angle and teleseismic data. The profile shows a bi-vergent asymmetric structure of the crust beneath the Alpine axis which reaches a maximum thickness of 55 km, and 80–100 km long transcrustal ramps, the southward dipping ‘Sub-Tauern-Ramp’ and the northward-dipping ‘Sub-Dolomites-Ramp’. Strongly reflective patterns of these ramps can be traced towards the north to the Inn Valley and towards the south to the Valsugana thrust belt, both of which show enhanced seismicity in the brittle upper crust. The seismic sections do not reveal any direct evidence for the presence of the Periadriatic Fault system, the presumed equivalent to the Insubric Line in the Western Alps. According to our new evolutionary model, the Sub-Tauern-Ramp is linked at depth with remnants of the subducted Penninic Ocean. The ‘crocodile’-type model describes an upper/lower crustal decoupling and wedging of both the European and the Adriatic–African continents.  相似文献   

11.
In the Eastern Cordillera of Colombia, a new structural model constrained by field data, paleontologic determinations, and interpretations of seismic reflection profiles is proposed. The model implies 70 km of shortening, including reactivation of basement structures as inverse faults in both flanks of the chain. These faults propagated within the lower Cretaceous strata, inducing passively rooted and transported thrust sheets as the successive basement faults were reactivated. Two structural styles are identified in the western flank: (1) positive flower structures in a transpressive regime, which affected rocks older than upper Paleocene and were unconformably covered by post–late Paleocene sediments, and (2) compressive structures during the late Miocene–Recent Andean phase. Presently, WNW-ESE compression reactivates Late Paleocene structures, which locally affect Andean trends. In the western margin of the Eastern Cordillera, the Cambao thrust takes up most displacement, whereas the Bituima fault takes only a minor part. To the south, this relationship reverses, suggesting complementary behavior by the Bituima and Cambao faults, as well as a transfer zone. This suggestion explains the southward termination of the Guaduas syncline as a structure related to the Cambao fault, whereas the Bituima fault increases its displacement southward, generating the Girardot foldbelt that takes over the structural position of the Guaduas syncline.  相似文献   

12.
GPS-derived velocities (1993–2002) in northwestern California show that processes other than subduction are in part accountable for observed upper-plate contraction north of the Mendocino triple junction (MTJ) region. After removing the component of elastic strain accumulation due to the Cascadia subduction zone from the station velocities, two additional processes account for accumulated strain in northern California. The first is the westward convergence of the Sierra Nevada–Great Valley (SNGV) block toward the coast and the second is the north–northwest impingement of the San Andreas fault system from the south on the northern California coastal region in the vicinity of Humboldt Bay. Sierra Nevada–Great Valley block motion is northwest toward the coast, convergent with the more northerly, north–northwest San Andreas transform fault-parallel motion. In addition to the westward-converging Sierra Nevada–Great Valley block, San Andreas transform-parallel shortening also occurs in the Humboldt Bay region. Approximately 22 mm/yr of distributed Pacific–SNGV motion is observed inland of Cape Mendocino across the northern projections of the Maacama and Bartlett Springs fault zones but station velocities decrease rapidly north of Cape Mendocino. The resultant 6–10 mm/yr of San Andreas fault-parallel shortening occurs above the southern edge of the subducted Gorda plate and at the latitude of Humboldt Bay. Part of the San Andreas fault-parallel shortening may be due to the viscous coupling of the southern edge of the Gorda plate to overlying North American plate. We conclude that significant portions of the upper-plate contraction observed north of the MTJ region are not solely a result of subduction of the Gorda plate but also a consequence of impingement of the western edge of the Sierra Nevada–Great Valley block and growth of the northernmost segments of the San Andreas fault system.  相似文献   

13.
Zvi Ben-Avraham   《Tectonophysics》1978,45(4):269-288
The structural elements on the shallow (Sunda Shelf) and deep seas of east and south—east Asia are interpreted as the result of past interaction between lithospheric plates. During the Mesozoic the western Pacific Ocean and the eastern Indian Ocean were parts of the Tethys Sea and were moving to the north relative to Antarctica. A Mesozoic ridge system trending east—west produced east—west trending magnetic anomalies throughout the entire area. The ridge system was bisected by large north—south transform faults which divided the eastern Indian Ocean—western Pacific Ocean into sub-plates traveling at different speeds. The Mesozoic evolution of the Sunda Shelf and the deep seas resulted from such horizontal differential movement in a north—south direction. During Late Cretaceous—Eocene the various segments of the spreading ridge gradually submerged beneath the deep sea trenches to the north, causing a gradual change in the direction of motion of the Pacific plate. The change in motion of the Pacific plate resulted in the separation between the Pacific and the eastern Indian Ocean plates, the formation of large northeast—southwest tectonic elements on the Sunda Shelf and elsewhere in south—east Asia, the formation of the western Philippine Basin and the rapid northward motion of Australia. The only remnant of the Mesozoic ridge system exists today at the western Philippine Basin.  相似文献   

14.
The interpretation of the seismic Vibroseis and explosive TRANSALP profiles has examined the upper crustal structures according to the near-surface geological evidences and reconstructions which were extrapolated to depth. Only the southern sector of the TRANSALP transect has been discussed in details, but its relationship with the whole explored chain has been considered as well. The seismic images indicate that pre-collision and deep collision structures of the Alps are not easily recognizable. Conversely, good records of the Neo-Alpine to present architecture were provided by the seismic sections.Two general interpretation models (“Crocodile” and “Extrusion”) have been sketched by the TRANSALP Working Group [2002]. Both illustrate the continental collision producing strong mechanical interaction of the facing European and African margins, as documented by giant lithosphere wedging processes. Arguments consistent with the “Extrusion” model and with the indentation of Adriatic (Southalpine) lithosphere underneath the Tauern Window (TW) are:
– According to the previous DSS reconstructions, the Bouguer anomalies and the Receiver Functions seismological data, the European Moho descends regularly attaining a zone south of the Periadriatic Lineament (PL). The Moho boundary and its geometry appear to be rather convincing from images of the seismic profile;
– the Tauern Window intense uplift and exhumation is coherent with the strong compression regime, which acted at depth, thus originating the upward and lateral displacement of the mobile and ductile Penninic masses according to the “Extrusion” model;
– the indentation of the Penninic mobile masses within the colder and more rigid Adriatic crust cannot be easily sustained. Wedging of the Adriatic stiffened lower crust, under high stresses and into the weaker Penninic domain, can be a more suitable hypothesis. Furthermore, the intrusion of the European Penninic crustal wedge underneath the Dolomites upper crust is not supported by any significant uplifting of the Dolomites. The total average uplift of the Dolomites during the Neogene appears to be 6−7 times smaller than that recognized in the TW. Markedly the northward dip of the PL, reaching a depth of approximately 20 km, is proposed in our interpretation;
– finally, the Adriatic upper crustal evolution points to the late post-collision change in the tectonic grow-up of the Eastern Alps orogenic chain. The tectonic accretion of the northern frontal zone of the Eastern and Central Alps was interrupted from the Late Miocene (Serravallian–Tortonian) onward, as documented by the Molasse basin evolution. On the contrary, the structural nucleation along the S-vergent tectonic belt of the eastern Southern Alps (Montello–Friuli thrust belt) severely continued during the Messinian and the Plio–Pleistocene. This structural evolution can be considered to be consistent with the deep under-thrusting and wedge indentation of the Adriatic lithosphere underneath the southern side of the Eastern Alps thrust-and-fold belt.
Similarly, the significance of the magmatic activity for the construction of the Southern Alps crust and for its mechanical and geological differentiation, which qualified the evolution of the thrust-and-fold belt, is highlighted, starting with the Permian–Triassic magmatism and progressing with the Paleogene occurrences along the Periadriatic Lineament and in the Venetian Magmatic Province (Lessini–Euganei Hills).  相似文献   

15.
The TRANSALP consortium, comprising institutions from Italy, Austria and Germany, carried out deep seismic reflection measurements in the Eastern Alps between Munich and Venice in 1998, 1999 and 2001. In order to complement each other in resolution and depth range, the Vibroseis technique was combined with simultaneous explosive source measurements. Additionally, passive cross-line recording provided three-dimensional control and alternative north–south sections. Profits were obtained by the combination of the three methods in sectors or depths where one method alone was less successful.The TRANSALP sections clearly image a thin-skinned wedge of tectonic nappes at the northern Alpine front zone, unexpected graben or half-graben structures within the European basement, and, thick-skinned back-thrusting in the southern frontal zone beneath the Dolomite Mountains. A bi-vergent structure at crustal scale is directed from the Alpine axis to the external parts. The Tauern Window obviously forms the hanging wall ramp anticline above a southward dipping, deep reaching reflection pattern interpreted as a tectonic ramp along which the Penninic units of the Tauern Window have been up-thrusted.The upper crystalline crust appears generally transparent. The lower crust in the European domain is characterized by a 6–7 km thick laminated structure. On the Adriatic side the lower crust displays a much thicker or twofold reflective pattern. The crustal root at about 55 km depth is shifted around 50 km to the south with respect to the main Alpine crest.  相似文献   

16.
We describe an active right-lateral strike-slip fault zone along the southern margin of the Japan Sea, named the Southern Japan Sea Fault Zone (SJSFZ). Onshore segments of the fault zone are delineated on the basis of aerial photograph interpretations and field observations of tectonic geomorphic features, whereas the offshore parts are interpreted from single-/multichannel seismic data combined with borehole information. In an effort to evaluate late Quaternary activity along the fault zone, four active segments separated by uplifting structures are identified in this study. The east–northeast-trending SJSFZ constitutes paired arc-parallel strike-slip faults together with the Median Tectonic Line (MTL), both of which have been activated by oblique subduction of the Philippine Sea plate during the Quaternary. They act as the boundaries of three neotectonic stress domains around the eastern margin of the Eurasian plate: the near-trench Outer zone and NW–SE compressive Inner zone of southwest Japan arc, and the southern Japan Sea deformed under E–W compression from south to north.  相似文献   

17.
Many stable continental regions have subregions with poorly defined earthquake hazards. Analysis of minor structures (folds and faults) in these subregions can improve our understanding of the tectonics and earthquake hazards. Detailed structural mapping in Pottawatomie County has revealed a suite consisting of two uplifted blocks aligned along a northeast trend and surrounded by faults. The first uplift is located southwest of the second. The northwest and southeast sides of these uplifts are bounded by northeast-trending right-lateral faults. To the east, both uplifts are bounded by north-trending reverse faults, and the first uplift is bounded by a north-trending high-angle fault to the west. The structural suite occurs above a basement fault that is part of a series of north–northeast-trending faults that delineate the Humboldt Fault Zone of eastern Kansas, an integral part of the Midcontinent Rift System. The favored kinematic model is a contractional stepover (push-up) between echelon strike-slip faults. Mechanical modeling using the boundary element method supports the interpretation of the uplifts as contractional stepovers and indicates that an approximately east–northeast maximum compressive stress trajectory is responsible for the formation of the structural suite. This stress trajectory suggests potential activity during the Laramide Orogeny, which agrees with the age of kimberlite emplacement in adjacent Riley County. The current stress field in Kansas has a N85°W maximum compressive stress trajectory that could potentially produce earthquakes along the basement faults. Several epicenters of seismic events (<M2.0) are located within 10 km of the structural suite. One epicenter is coincident with the northwest boundary of the uplift. This structural suite, a contractional stepover between echelon northeast-trending right-lateral faults, is similar to that mapped in the New Madrid Seismic Zone, and both areas currently feature roughly east–west maximum compressive stress trajectory. Based on these similarities, the faults in Pottawatomie County have the potential for seismicity. The results demonstrate that mechanical analysis of minor structural features can improve our knowledge of local earthquake hazards.  相似文献   

18.
The Betic-Rif Cordilleras, formed by the interaction of NW–SE convergence between the Eurasian and African plates and the westward motion of their Internal Zones, provide a good example of an active tectonic arc. The Campo de Dalías and Campo de Níjar constitute outcropping sectors of Neogene and Quaternary rocks located in the southeastern border of the Betic Cordilleras and allow us to study the recent deformations developed in the internal border of this tectonic arc.The main active faults with related seismicity, representing a moderate seismic hazard, associated to the southeastern Betic Cordilleras boundary, include high-angle NW–SE-oriented normal faults that affect, at least, the upper part of the crust, a main detachment located at 10 km depth, and probably another detachment at 20 km as well. Seismite structures, recent fault scarps with associated colluvial wedges that deform the drainage network and the alignment of the coastline, indicate that the high-angle faults have been active at least since the Quaternary.Paleostresses determined from microfault analysis in Quaternary deposits generally show an ENE–WSW trend of extension. Present-day earthquake focal mechanisms include normal, strike-slip and reverse faulting. Normal and strike-slip focal mechanisms generally indicate ENE–WSW extension, and strike-slip and reverse focal mechanisms are related to NNW–SSE compression.The maximum horizontal compression has a consistently NNW–SSE trend. The deep activity of detachments and reverse faults determines the NNW–SSE crustal shortening related to the Eurasian–African plate convergence. At surface, however, the predominance of normal faults is probably produced by the increase in the relative weight of the vertical stress axis, which in turn may be related to relief uplift and subsequent horizontal spreading. The internal mountain front boundary of the Betic Cordilleras developed through the activity of a set of structures that is more complex than a typical external mountain front, probably as a consequence of a vertical variable stress field that acted on previously deformed rocks belonging to the Internal Zone of the cordilleras.  相似文献   

19.
We present a tectonic map of the Tauern Window and surrounding units (Eastern Alps, Austria), combined with a series of crustal-scale cross-sections parallel and perpendicular to the Alpine orogen. This compilation, largely based on literature data and completed by own investigations, reveals that the present-day structure of the Tauern Window is primarily characterized by a crustal-scale duplex, the Venediger Duplex (Venediger Nappe system), formed during the Oligocene, and overprinted by doming and lateral extrusion during the Miocene. This severe Miocene overprint was most probably triggered by the indentation of the Southalpine Units east of the Giudicarie Belt, initiating at 23–21 Ma and linked to a lithosphere-scale reorganization of the geometry of mantle slabs. A kinematic reconstruction shows that accretion of European lithosphere and oceanic domains to the Adriatic (Austroalpine) upper plate, accompanied by high-pressure overprint of some of the units of the Tauern Window, has a long history, starting in Turonian time (around 90 Ma) and culminating in Lutetian to Bartonian time (45–37 Ma).  相似文献   

20.
R.A. Klassen   《Applied Geochemistry》2009,24(8):1382-1393
As a pilot study for mapping the geochemistry of North American soils, samples were collected along two continental transects extending east–west from Virginia to California, and north–south from northern Manitoba to the US–Mexican border and subjected to geochemical and mineralogical analyses. For the northern Manitoba–North Dakota segment of the north–south transect, X-ray diffraction analysis and bivariate relations indicate that geochemical properties of soil parent materials may be interpreted in terms of minerals derived from Shield and clastic sedimentary bedrock, and carbonate sedimentary bedrock terranes. The elements Cu, Zn, Ni, Cr and Ti occur primarily in silicate minerals decomposed by aqua regia, likely phyllosilicates, that preferentially concentrate in clay-sized fractions; Cr and Ti also occur in minerals decomposed only by stronger acid. Physical glacial processes affecting the distribution and concentration of carbonate minerals are significant controls on the variation of trace metal background concentrations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号