首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The TRANSALP consortium, comprising institutions from Italy, Austria and Germany, carried out deep seismic reflection measurements in the Eastern Alps between Munich and Venice in 1998, 1999 and 2001. In order to complement each other in resolution and depth range, the Vibroseis technique was combined with simultaneous explosive source measurements. Additionally, passive cross-line recording provided three-dimensional control and alternative north–south sections. Profits were obtained by the combination of the three methods in sectors or depths where one method alone was less successful.The TRANSALP sections clearly image a thin-skinned wedge of tectonic nappes at the northern Alpine front zone, unexpected graben or half-graben structures within the European basement, and, thick-skinned back-thrusting in the southern frontal zone beneath the Dolomite Mountains. A bi-vergent structure at crustal scale is directed from the Alpine axis to the external parts. The Tauern Window obviously forms the hanging wall ramp anticline above a southward dipping, deep reaching reflection pattern interpreted as a tectonic ramp along which the Penninic units of the Tauern Window have been up-thrusted.The upper crystalline crust appears generally transparent. The lower crust in the European domain is characterized by a 6–7 km thick laminated structure. On the Adriatic side the lower crust displays a much thicker or twofold reflective pattern. The crustal root at about 55 km depth is shifted around 50 km to the south with respect to the main Alpine crest.  相似文献   

2.
Dynamite shots of the crustal-scale refraction seismic project ALP 2002 were recorded by an array of 40 seismological three-component stations on the TRANSALP profile. These observations provide a direct link between the two deep seismic projects. We report preliminary results obtained from these data. In a first approach, we verified the TRANSALP refraction seismic velocity model computing travel times for several shots and comparing them to the new observations. The results generally confirm this model. Significant first-break travel time differences in and near the Tauern Window are explained by anisotropy. Large-scale features of the model, particularly the Moho structure, seem to be continuous towards the east. Travel time residuals of wide-angle reflections indicate a slight eastward dip component of the Adriatic Moho.  相似文献   

3.
The interpretation of the seismic Vibroseis and explosive TRANSALP profiles has examined the upper crustal structures according to the near-surface geological evidences and reconstructions which were extrapolated to depth. Only the southern sector of the TRANSALP transect has been discussed in details, but its relationship with the whole explored chain has been considered as well. The seismic images indicate that pre-collision and deep collision structures of the Alps are not easily recognizable. Conversely, good records of the Neo-Alpine to present architecture were provided by the seismic sections.Two general interpretation models (“Crocodile” and “Extrusion”) have been sketched by the TRANSALP Working Group [2002]. Both illustrate the continental collision producing strong mechanical interaction of the facing European and African margins, as documented by giant lithosphere wedging processes. Arguments consistent with the “Extrusion” model and with the indentation of Adriatic (Southalpine) lithosphere underneath the Tauern Window (TW) are:
– According to the previous DSS reconstructions, the Bouguer anomalies and the Receiver Functions seismological data, the European Moho descends regularly attaining a zone south of the Periadriatic Lineament (PL). The Moho boundary and its geometry appear to be rather convincing from images of the seismic profile;
– the Tauern Window intense uplift and exhumation is coherent with the strong compression regime, which acted at depth, thus originating the upward and lateral displacement of the mobile and ductile Penninic masses according to the “Extrusion” model;
– the indentation of the Penninic mobile masses within the colder and more rigid Adriatic crust cannot be easily sustained. Wedging of the Adriatic stiffened lower crust, under high stresses and into the weaker Penninic domain, can be a more suitable hypothesis. Furthermore, the intrusion of the European Penninic crustal wedge underneath the Dolomites upper crust is not supported by any significant uplifting of the Dolomites. The total average uplift of the Dolomites during the Neogene appears to be 6−7 times smaller than that recognized in the TW. Markedly the northward dip of the PL, reaching a depth of approximately 20 km, is proposed in our interpretation;
– finally, the Adriatic upper crustal evolution points to the late post-collision change in the tectonic grow-up of the Eastern Alps orogenic chain. The tectonic accretion of the northern frontal zone of the Eastern and Central Alps was interrupted from the Late Miocene (Serravallian–Tortonian) onward, as documented by the Molasse basin evolution. On the contrary, the structural nucleation along the S-vergent tectonic belt of the eastern Southern Alps (Montello–Friuli thrust belt) severely continued during the Messinian and the Plio–Pleistocene. This structural evolution can be considered to be consistent with the deep under-thrusting and wedge indentation of the Adriatic lithosphere underneath the southern side of the Eastern Alps thrust-and-fold belt.
Similarly, the significance of the magmatic activity for the construction of the Southern Alps crust and for its mechanical and geological differentiation, which qualified the evolution of the thrust-and-fold belt, is highlighted, starting with the Permian–Triassic magmatism and progressing with the Paleogene occurrences along the Periadriatic Lineament and in the Venetian Magmatic Province (Lessini–Euganei Hills).  相似文献   

4.
A new interpretation of the Inntal–Tauern sector of the TRANSALP seismic section is presented. One of the most prominent contrasts in reflectivity in the TRANSALP seismic section is the contact between the Bajuvaric unit in the footwall and the overlying Tirolic unit and its basement across a moderately south-dipping interface. We trace this contact from the surface at the southern margin of the Inn valley to a depth of 5 km. There, the contact is deformed or cut by the Tauern Window northern margin. We define the contact between Bajuvaric and Tirolic units as Brixlegg thrust, which is older than Miocene Tauern window exhumation and has a Paleogene age. The sub-Tauern ramp connects with the Inntal fault system at the surface and roots below the Tauern window. Oblique thrust movements across this fault system in the Miocene caused exhumation of the hanging wall, where the fault has a ramp geometry, which is in the area of the TRANSALP cross section and west of it. East of the TRANSALP cross section, the fault system merges with Alpine basal thrust, which is a flat. No Miocene exhumation occurred above the flat.  相似文献   

5.
The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.  相似文献   

6.
The interior of the Tauern Window exposes underplated Penninic continental lithosphere and the overlying obducted Penninic oceanic crust within a large antiformal dome in the internal zone of the Eastern Alps. These units have been affected by a polyphase deformation history. Generally, three deformation events are distinguished. D1 is related to underplating of, and top-to-the-N nappe stacking within, the Penninic continental units of the Tauern Window. Deformation stage D2 is interpreted to reflect the subsequent continent collision between the Penninic continental units and the European foreland, D3 is related to the formation of the dome structure within the Tauern Window. During thickening of continental lithosphere and nappe stacking (D1), and subsequent intracontinental shortening (D2), these tectonic units have been ductilely deformed close to a plane strain geometry. Conditions for the plastic deformation of the main rock-forming mineral phases (quartz, feldspar, dolomite, calcite) have prevailed during all three phases of crustal deformation. Generally, two types of quartz microstructures that are related to D1 are distinguished within the Tauern Window: (a) Equilibrated and annealed fabrics without crystallographic preferred orientations (CPO) have only been observed in the central part of the southeastern Tauern Window, corresponding with amphibolite-grade metamorphic conditions. (b) In the northeastern and central part of the Tauern Window microstructures are characterized by quartz grains that show equilibrated shape fabrics, but well preserved CPO with type-I cross girdle distributions, indicating a deformation geometry close to plane strain. During D2, two types of quartz microstructures are distinguished, too: (a) Quartz grains that show equilibrated shape fabrics, but well-preserved CPO. The c-axes distributions generally are characterized by type-I cross girdles, locally by type-II cross girdles, and in places, oblique single girdle distributions. (b) A second type of quartz microstructure is characterized by highly elongated grains and fabrics typical for dislocation creep and grain-boundary migration, and strong CPO. This type is restricted to the southern sections of the western and eastern Tauern Window. The c-axis distributions show type-I cross girdles in the western part of the Tauern Window and single girdles in the southeastern part. In the western part of the Tauern Window, a continuous transition from type (b) microstructures in the south to type (a) microstructures in the north is documented. The microstructural evolution also documents that the dome formation in the southeastern and western Tauern Window has already started during D2 and has continued subsequent to the equilibration during amphibolite to greenschist facies metamorphism. D3 is restricted to distinct zones of localized deformation. D3-related quartz fabrics are characterized by the formation of ribbon grains; the c-axes show small-circle distributions around the Z-axis of the finite-strain ellipsoid. During exhumation and doming (D3), deformation occurred under continuously decreasing temperatures.  相似文献   

7.
Eclogites in the Texel Unit (Eastern Alps; South Tyrol, Italy) represent the westernmost outcrops of the E–W striking Eoalpine High‐Pressure Belt (EHB). East of the Tauern Window, the EHB forms part of a Cretaceous intracontinental south‐dipping subduction/collision zone; however, the same nappe stack displays a northwest dip at its western end. This prominent change in dip direction gave rise to discussions on the general setting of the Eoalpine collision. Based on our own observations and literature data, we present a new tectonic model for the western end of the EHB. Due to the special situation of this area at the tip of the Southalpine indenter, originally south(east) dipping structures became overturned, and former thrusts appear as normal faults (e.g. Schneeberg fault zone) while former normal faults presently display thrust geometries (e.g. Jaufen fault). Thus, we explain the current configuration with a coherent Eoalpine subduction direction.  相似文献   

8.
The major structure accommodating orogen-parallel extension in the Eastern Alps is inferred to be the Brenner Fault, which forms the western boundary of the Tauern Window. The estimated amount of extension along this fault varies from a minimum of 10–20 km to a maximum of >70 km. All investigations that have attempted to constrain this amount of extension have calculated the fault plane parallel displacement required to restore the difference in structural level between footwall and hanging wall as constrained by geobarometry. However, these calculations neglected the component of exhumation of the footwall resulting from folding and erosion. Therefore, the total amount of extensional displacement was systematically overestimated. In the present study, we project a tectonic marker surface from the footwall and hanging wall of the Brenner Fault onto a N–S-striking cross section. This marker surface, which is the base of the Patscherkofel unit in the footwall and the base of the Ötztal basement in the hanging wall, is inferred to have occupied the same structural level in the hanging wall and footwall of the Brenner Fault before its activity. Therefore, the difference in height between the marker projected from the footwall and from the hanging wall is a measure of the vertical offset across the Brenner Fault. This construction shows that the vertical offset of the marker horizon on both sides of the Brenner Fault varies strongly and continuously along strike of the Brenner Fault, attaining a maximum value of 15 km at the hinge of the folded footwall (Tauern Dome). The along-strike change of vertical offset is explained by large-scale upright folding of the footwall that did not affect the hanging wall of the Brenner Fault. Therefore, the difference in vertical offset of 10 km between the area of the Brenner Pass and the area immediately south of Innsbruck corresponds to the shortening (upright folding) component of exhumation of the footwall. The remaining 5 km of vertical offset must be attributed to extensional deformation. The Brenner Fault itself is barely folded, its dip varies between 20 and 70°, and it crosscuts the upright folds of the western Tauern Window. Given the offset of 5 km, the dip of the fault constrains the extensional displacement to be between 2 and 14 km. We conclude that the Tauern Window was exhumed primarily by folding and erosion, not by extensional unroofing.  相似文献   

9.
New 40Ar/39Ar geochronology places time constraints on several stages of the evolution of the Penninic realm in the Eastern Alps. A 186±2 Ma age for seafloor hydrothermal metamorphic biotite from the Reckner Ophiolite Complex of the Pennine–Austroalpine transition suggests that Penninic ocean spreading occurred in the Eastern Alps as early as the Toarcian (late Early Jurassic). A 57±3 Ma amphibole from the Penninic subduction–accretion Rechnitz Complex dates high-pressure metamorphism and records a snapshot in the evolution of the Penninic accretionary wedge. High-pressure amphibole, phengite, and phengite+paragonite mixtures from the Penninic Eclogite Zone of the Tauern Window document exhumation through ≤15 kbar and >500 °C at 42 Ma to 10 kbar and 400 °C at 39 Ma. The Tauern Eclogite Zone pressure–temperature path shows isothermal decompression at mantle depths and rapid cooling in the crust, suggesting rapid exhumation. Assuming exhumation rates slower or equal to high-pressure–ultrahigh-pressure terrains in the Western Alps, Tauern Eclogite Zone peak pressures were reached not long before our high-pressure amphibole age, probably at ≤45 Ma, in accordance with dates from the Western Alps. A late-stage thermal overprint, common to the entire Penninic thrust system, occurred within the Tauern Eclogite Zone rocks at 35 Ma. The high-pressure peak and switch from burial to exhumation of the Tauern Eclogite Zone is likely to date slab breakoff in the Alpine orogen. This is in contrast to the long-lasting and foreland-propagating Franciscan-style subduction–accretion processes that are recorded in the Rechnitz Complex.  相似文献   

10.
In the Austroalpine Basement to the south of the Tauern Window, distinct suites of metabasites occur with orthogneisses in pre-Early-Ordovician units. Tholeiitic and alkaline within-plate basalt-type metabasites are associated with acid meta-porphyroids in the post-Early-Ordovician Thurntaler Phyllite Group. According to their correlated trace element abundances, metabasite zircons crystallized with their host rocks. Protolith Pb–Pb zircon ages, whole-rock Ta/Yb–Th/Yb and oxygen, Sr, Nd isotope data define two principal evolution lines. An older evolution at elevated Th/Yb typical of subduction-related magmatism, started by 590-Ma N-MORB-type and 550–530 Ma volcanic arc basalt type basic suites, which mainly involved depleted mantle sources. It finished with mainly crustal-source 470–450-Ma acid magmatites. An other evolution line by tholeiitic and 430-Ma alkaline within-plate basalt-type suites in both pre- and post-Early-Ordovician units is characterized by an intraplate mantle metasomatism and enrichment trend along multicomponent sources. These magmatic evolution lines can be related to a plate tectonic scenario that involved terranes in a progressively mature Neoproterozoic to Ordovician active margin, and a subsequent Palaeo-Tethys passive margin along the north Gondwanan periphery.  相似文献   

11.
New Rb/Sr data on mineral and whole rock samples from in and around the south-east corner of the Tauern Window are presented. Pennine orthogeneisses yield an Rb/Sr whole rock age of 279±9 m.y., while orthogneiss samples from the Altkristallin Sheet near Innerkrems, Carinthia, yield an age of 381±30 m.y. by the same technique. The apparent mineral age break across the margins of the Tauern Window is investigated in an area of good structural and petrofabric control. The post-Palaeozoic history of the Eastern Alps is then discussed in the context of the available Rb/Sr data. It is argued that the bulk of the Katschberg Phyllites are of pre-Mesozoic age; that the major overthrusting movements of the Austroalpine Units were completed by 60–65 m.y.; and that the Peri-Adriatic intrusives can be little older than middle Tertiary.  相似文献   

12.
In order to evaluate rates of tectonometamorphic processes, growth rates of garnets from metamorphic rocks of the Tauern Window, Eastern Alps were measured using Rb-Sr isotopes. The garnet growth rates were determined from Rb-Sr isotopic zonation of single garnet crystals and the Rb-Sr isotopic compositions of their associated rock matrices. Garnets were analyzed from the Upper Schieferhülle (USH) and Lower Schieferhülle, (LSH) within the Tauern Window. Two garnets from the USH grew at rates of 0.67 –0.13 +0.19 mm/million years and 0.88 –0.19 +0.34 mm/million years, respectively, indicating an average growth duration of 5.4±1.7 million years. The duration of growth coupled with the amount of rotation recorded by inclusion trails in the USH garnets yields an average shear-strain rate during garnet growth of 2.7 –0.7 +1.2 ×10-14 s-1. Garnet growth in the sample from the USH occurred between 35.4±0.6 and 30±0.8 Ma. The garnet from the LSH grew at a rate of 0.23±0.015 mm/million years between 62±1.5 Ma and 30.2±1.5 Ma. Contemporaneous cessation of garnet growth in both units at 30 Ma is in accord with previous dating of the thermal peak of metamorphism in the Tauern Window. Correlation with previously published pressure-temperature paths for garnets from the USH and LSH yields approximate rates of burial, exhumation and heating during garnet growth. Assuming that theseP — T paths are applicable to the garnets in this study, the contemporaneous exhumation rates recorded by garnet in the USH and LSH were approximately 4 –2 +3 mm/year and 2±1 mm/year, respectively.  相似文献   

13.
Fortyfive new K-Ar ages and Sr isotope data on amphiboles, biotites, clinopyroxenes and whole rock samples from subvolcanic dykes south of the Tauern Window establish, that alkalibasaltic dykes were intruded 30 m.y. ago and shoshonitic volcanism occured between 30 and 24 m.y. ago. Two calc-alkaline rocks of high-potassium composition yielded ages of 40 and 26 m.y. resp., a spread which may or may not be real. Calc-alkaline dykes with medium and low potassium contain excess argon and are hence undatable. Alkalibasaltic dykes have 87Sr/86Sr ratios of 0.7056–0.7070, shoshonitic rocks 0.7075–0.7133, potassium rich calc-alkaline dykes 0.7077–0.7100. 87Sr/86Sr of all other calc-alkaline rocks scatter between 0.7074 and 0.7150. Sr data indicate that dykes studied do not represent closed Sr systems, but that Sr characteristics result from selective strontium assimilation en route to surface. Primary Sr isotopic ratios of alkalibasaltic dykes point to an origin of these rocks in enriched sub-continental upper mantle. The source region of shoshonitic and high-potassium calcalkaline rocks could have 87Sr/86Sr around 0.707, which is assigned to the input of a component rich in alkalies, LREE and LIL elements. Genetic relationships with other Tertiary magmatites of similar geotectonic position are explained in terms of plate tectonic models of the Eastern Alps.  相似文献   

14.
The understanding of the intraplate tectonics of Central Europe requires a detailed picture of how stress is transferred from the interaction of the Eurasian, Nubian and Anatolian plates to the Alpine, Carpathian, Pannonian and Dinaric regions. Recent strain distribution is controlled by the Adria horizontal push, by the Vrancea vertical slab pull and associated horizontal displacements, and by the Aegean/Anatolia extension and slab-roll back. We present a horizontal velocity field for the Alpine-Carpathian-Pannonic-Dinaric and Balkan regions resulting from a new combination of seven different GPS networks formed from permanent and campaign stations. Dedicated velocity profiles in two specific regions are studied in detail. One is the Alpine Pannonian region, with a detailed picture of the NS indentation of the Adria microplate into the Southern Alps, in NE Italy, the deformation in the Tauern Window and the eastwards kinematics of a Pannonian plate fragment. The second study region includes Transylvania, the Southern Carpathians up to the Aegean sea and Albania, where a major right lateral shear deformation exists as a consequence of the NE convergence of the Apulia platform towards the Dinarids, and the SSW motion of Macedonia, Western Bulgaria and Rumania, related to the Hellenic arc dynamics in the Eastern Mediterranean. The profiles in the Alpine–Pannonian area indicate that a velocity drop of 2.5 +/− 0.4 mm/yr associated with the Adria indentation concentrates on a segment of some 50 km south of the Periadriatic fault. The deformation becomes extensional by a similar amount just north of the Periadriatic fault, in the Tauern Window, where the updoming of the Tauern Window implies vertical motion which could well be associated with surface extension. In the EW profile, we observe a sudden velocity change of 1.5 +/− 0.2 mm/yr in 20 km, corresponding to the right lateral Lavant fault, which seems to mark the border between dominant indentation kinematics to the West and dominant extrusion kinematics to the East.Three profiles are considered in Southern and Eastern Europe: one across the lower Adriatic sea from Apulia in Italy to the southern Dinarides, which enables it to constrain the velocity drop associated with the subduction of the Adria microplate into the Dinarides to 3.2 +/− 0.5 mm/yr in 140 km. The second profile is longitudinal and constrains the velocity inversion of 7.4 +/− 1.0 mm/yr in 350 km associated with right lateral shear faults in Albania. The third profile crosses the Transylvania region with a shortening of 2.3 +/− 1.0 mm/yr in 220 km, and the Wallachian–Moesian region up to the Chalcidic peninsula in N Greece. This lower part of the profile implies an extensional stretch of the upper crust of 3.2 +/− 0.9 mm/yr in 440 km, culminating in the Hellenic arc. Strain rate maps are presented in this regional scale, showing the excellent agreement between fault plane solutions of crustal earthquakes and the eigenvectors of the GPS derived two dimensional strain rate tensor.Three profiles are considered in the Balkan and SE Carpathians: one across the lower Adriatic sea from Apulia in Italy to the southern Dinarides, which enables to constrain the velocity drop associated to the subduction of the Adria microplate into the Dinarides to 3.2 +/− 0.5 mm/yr in 140 km. The second profile is longitudinal and constrains the velocity inversion of 7.4 +/− 1.0 mm/yr in 350 km associated to right lateral shear faults in Macedonia, a highly seismic region. The third profile crosses the Transylvania with a shortening2.3 +/− 1.0 mm/yr in 220 km, and the Wallachian–Moesian region up to the Chalcidic peninsula in N Greece. This lower part of the profile implies an extensional stretch of the upper crust of 3.2 +/− 0.9 mm/yr in 440 km, culminating in the Hellenic arc.  相似文献   

15.
The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria.  相似文献   

16.
New Hornblende K-Ar and 39Ar-40Ar and mica Rb-Sr and K-Ar ages are used to place specific timemarks on a well-constrained pressure-temperature path for the late Alpine metamorphism in the Western Tauern Window. After identification of excess 40Ar, the closure behavior of Ar in hornblende is compared with that of Sr and Ar in phengite and biotite. Samples were collected in three locations, whose maximum temperatures were 570° C (Zemmgrund), 550° C (Pfitscher Joch), and 500–540° C (Landshuter Hütte).The average undisturbed age sequence found is: Phengite Rb-Sr (20 Ma)>hornblende K-Ar (18 Ma)>phengite K-Ar (15 Ma)>biotite Rb-Sr, K-Ar (13.3 Ma)>apatite FT (7 Ma). Except for the phengite Rb-Sr age, the significance of which is debatable, all ages are cooling ages. No compositional effects are seen for closure in biotite. Additionally, Rb-Sr phengite ages from shearzones possibly indicate continuous shearing from 20 to 15 Ma, with reservations regarding the validity of the initial Sr correction and possible variations of the closure temperatures. The obviously lower closure temperature (T c) for Ar in these hornblendes than for Sr in the unsheared phengites indicates that the T c sequence in the Western Tauern Window is different from those observed in other terrains. In spite of this discrepancy, valuable geological conclusions can be drawn if the application of closure temperatures is limited to this restricted area with similar T, P and : (1) All ages of samples located on equal metamorphic isotherms decrease from east to west by about 1 Ma which is the result of a westward tilting of the Tauern Window during uplift. (2) In a PT-path, the undisturbed cooling ages yield constantly decreasing uplift rates from 3.6 mm/a to 0.1 mm/a. (3) Use of recently published diffusion data for Ar in hornblende (T c=520° C) and biotite (T c=320° C) suggests an extrapolated phengite closure temperature for Sr at 550° C. This suggests that the prograde thermal metamorphism at this tectonic level of the Tauern Window lasted until some 20 Ma ago.  相似文献   

17.
Fourteen cogenetic quartz-biotite pairs from gneissic wall rocks, and 22 quartz, 16 calcite, and 8 biotite samples and 1 sample of albite from fissure-filling veins in the Western Tauern Window were analyzed for their oxygen isotope composition. The δ18O values show the following ranges: (a) quartz, +6.0 in fissure in amphibolite to +10.3 in fissures in granite gneisses; (b) biotite, +2.5 to +6.7; and (c) calcite, +7.0 to +8.9. The δ18O value of albite is +7.1. Only a small variation in the hydrogen isotope composition of biotite was detected. δD values of 7 biotites from gneisses and fissure fillings varied from −54 to −59. There is no significant difference in the hydrogen isotope composition of fissure biotite and biotite from the host rock. This indicates that a common water source of probably deep-seated origin existed, with no detectable contribution from isotopically light meteoric water. Oxygen isotope fractionations between coexisting quartz and biotite of 3.5 to 7.0‰ indicate equilibrium temperatures of 640 ° to 450 ° C, respectively, using the fractionation curve of Hoernes and Friedrichsen (1978). The highest temperatures of equilibration are for the rocks at the Alpenhauptkamm, i.e., the central part of the Tauern Window. Successively lower temperatures are found to the north and to the south of the Alpenhauptkamm along a traverse through Penninic units of the Tauern Window. The metamorphism of the host rocks and the filling of fissures has occurred at the same temperature in a given sample locality.  相似文献   

18.
We present a tectonic map of the Tauern Window and surrounding units (Eastern Alps, Austria), combined with a series of crustal-scale cross-sections parallel and perpendicular to the Alpine orogen. This compilation, largely based on literature data and completed by own investigations, reveals that the present-day structure of the Tauern Window is primarily characterized by a crustal-scale duplex, the Venediger Duplex (Venediger Nappe system), formed during the Oligocene, and overprinted by doming and lateral extrusion during the Miocene. This severe Miocene overprint was most probably triggered by the indentation of the Southalpine Units east of the Giudicarie Belt, initiating at 23–21 Ma and linked to a lithosphere-scale reorganization of the geometry of mantle slabs. A kinematic reconstruction shows that accretion of European lithosphere and oceanic domains to the Adriatic (Austroalpine) upper plate, accompanied by high-pressure overprint of some of the units of the Tauern Window, has a long history, starting in Turonian time (around 90 Ma) and culminating in Lutetian to Bartonian time (45–37 Ma).  相似文献   

19.
New heat capacity measurements and cell volume data are presented for a very magnesian glaucophane from a Tauern Window eclogite. These data are combined with estimated entropy, thermal expansion, and compressibility data to generate an enthalpy of formation for glaucophane from experimentally determined phase equilibria. The data are supported by preliminary experiments of the author and provide consistent calculations on the pressure of formation of the Tauern eclogites and on the position of the blueschist-greenschist transformation reaction as studied experimentally by Maruyama et al. (1986). The resulting thermodynamic data for glaucophane may be combined with the dataset of Holland and Powell (1985) to calculate phase relations for blueschists and eclogites. The stability of magnesian glaucophane lies in the pressure range between 8 and 32 kbars at 400° C and between 13 and 33 kbars at 600° C, and the unusual eclogite assemblage of glaucophane+kyanite from the Tauern Window is restricted to pressures above 20 kbars at high water activity.  相似文献   

20.
A representative suite of deformed, metamorphic rocks from the TRANSALP reflection seismic traverse in the Eastern Alps was studied in the laboratory with respect to elastic properties and whole-rock texture. Compressional wave (P-wave) velocities and their anisotropies were measured at various experimental conditions (dry, wet, confining pressure), and compared to the texture-related component of anisotropy. Here ‘texture’ refers to crystallographic preferred orientations (CPOs), which were determined by neutron texture goniometry. In gneisses and schists P-wave anisotropies are mainly controlled by the microcrack fabric. In marbles and amphibolites CPO contributes very significantly to anisotropy. At 200 MPa confining pressure the degree of anisotropy is between 5% and 15%, depending on rock composition and/or CPO intensity. Special emphasis was also put on discussing possible effects of fluids on seismic velocity and anisotropy. Distributions of water-filled microcracks and pores are distinctly anisotropic, with maximum contribution to bulk rock velocity mostly parallel to the foliation pole. Decreasing P-wave velocity and increasing anisotropy of immersed samples may be explained by crack-induced changes of the elastic moduli of bulk rock. The main conclusion regarding interpretation of TRANSALP data is that strong reflections in the deep Alpine crust are probably due to marble–gneiss and metabasite–gneiss contacts, although P-wave anisotropy and boundaries between zones of ‘dry’ or ‘wet’ series may contribute to reflectivity to some extent.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号