首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 437 毫秒
1.
This study concentrates on small intrusions along two important faults of the Giudicarie fault system, the Northern Giudicarie and the Meran-Mauls fault, summarised under the term tonalitic lamellae. Magnetic fabric analyses in combination with structural field data indicate dextral strike slip deformation along the NE–SW striking northern part of the Giudicarie fault system, the Meran-Mauls fault, overprinted by younger thrusting. The regional stressfield was oriented approximately NNW–SSE during Tertiary times. The distinctive change in deformation along the Meran-Mauls fault from dextral strike slip to top-SE thrusting may be caused by a rotation or bending of the fault after the intrusion of the tonalites and the formation of their horizontal magnetic foliation. Based on the assumption of a preliminary straight Periadriatic lineament bent by the NNW-wards advancement of the Southalpine indenter, the tonalitic lamellae may be interpreted as lenses sheared off from the Adamello batholith during indentation. New U/Pb data on zircon show that some of the lamellae are of Oligocene (Rupelian), others of Late Eocene (Priabonian) age. An amphibole-gabbro lens occurring on the Meran-Mauls fault provides a Middle Eocene (Bartonian) age. Among the major Periadriatic plutons, only the southern units of the Adamello batholith also intruded in the Eocene that suggests a strong correlation between the tonalitic lamellae and the Adamello batholith. The analyses of the remanent magnetisation and the Curie point determinations argue for magnetite as the main carrier of a viscous magnetisation blocked at relatively low temperatures. This indicates slow cooling of the investigated intrusions along the Giudicarie fault system down to approximately 300°C, which is in contrast to the fast cooling determined for the Adamello intrusion units currently at the surface. The new zircon fission track data also show later cooling of the tonalites along the Giudicarie fault system when compared with the Adamello batholith in the south and the Mauls lamellae in the north, indicating that this area contains magmatic bodies exhumed from a deeper structural level than in the Adamello and the Mauls region. This may be due to important top-SE thrusting and transpressive faulting in the footwall of the Northern Giudicarie fault and the Meran-Mauls fault.  相似文献   

2.
The Neogene kinematics of the Giudicarie fault (part of Periadriatic lineament, NE Italy) have been re-examined using apatite fission-track analysis. Twenty samples were collected along two geological sections; the first one crossing the Tertiary Corno Alto pluton (Adamello batholith) and the Variscan basement (Southalpine domain) adjacent to the South Giudicarie fault, the second one close to the North Giudicarie fault, in the Variscan basement of the Tonale nappe (Austroalpine system). Samples from the southern section show short tracks and ages between 14.7±1.2 Myr and 22.5±2.2 Myr along 1570 m of the profile; samples from the northern profile present long tracks and ages between 11.3±1.3 Myr and 14.7±3.4 Myr along 1225 m of the vertical profile. In the former, the presence of short tracks might indicate either a long permanence of the rocks in the apatite partial annealing zone, or a more complex thermal history; in the latter case we are dealing with rocks which experienced more rapid cooling.
  The two differing segments of the Giudicarie fault can be explained either as two completely independent tectonic features or, more likely, by hypothesizing a single fault active in its southern and northern parts at different times. Fission track data support a first exhumation of this single fault c. 15 Ma along the North Giudicarie, with a final exhumation towards the south, in the Adamello area, at c. 8–10 Ma (Mid Tortonian). This age fits with the so-called 'Giudicarie' phase, during which σ1 in the stress field was orientated N280–290°.  相似文献   

3.
Updated aeromagnetic maps of New Mexico together with current knowledge of the basement geology in the northern part of the state (Sangre de Cristo and Sandia–Manzano Mountains)—where basement rocks were exposed in Precambrian-cored uplifts—indicate that the northeast-trending Proterozoic shear zones that controlled localization of ore deposits in the Colorado mineral belt extend laterally into New Mexico. The shear zones in New Mexico coincide spatially with known epigenetic precious- and base-metal ore deposits; thus, the mineralized belts in the two states share a common inherited basement tectonic setting. Reactivation of the basement structures in Late Cretaceous–Eocene and Mid-Tertiary times provided zones of weakness for emplacement of magmas and conduits for ore-forming solutions. Ore deposits in the Colorado mineral belt are of both Late Cretaceous–Eocene and Mid-Tertiary age; those in New Mexico are predominantly Mid-Tertiary in age, but include Late Cretaceous porphyry-copper deposits in southwestern New Mexico.The mineralized belt in New Mexico, named the New Mexico structural zone, is 250-km wide. The northwest boundary is the Jemez subzone (or the approximately equivalent Globe belt), and the southeastern boundary was approximately marked by the Santa Rita belt. Three groups (subzones) of mineral deposits characterize the structural zone: (1) Mid-Tertiary porphyry molybdenite and alkaline-precious-metal deposits, in the northeast segment of the Jemez zone; (2) Mid-Tertiary epithermal precious-metal deposits in the Tijeras (intermediate) zone; and (3) Late Cretaceous porphyry-copper deposits in the Santa Rita zone. The structural zone was inferred to extend from New Mexico into adjacent Arizona. The structural zone provides favorable sites for exploration, particularly those parts of the Jemez subzone covered by Neogene volcanic and sedimentary rocks.  相似文献   

4.
This paper presents the results of a detailed structural analysis of the northern Nijar and southern Vera basins with special emphasis on the evolution of the regional stress field and the associated timing of movement of the Serrata, Gafarillos and Palomares strike-slip fault zones. These major fault zones control the Neogene deformation of the SE Internal Betic Cordilleras in Spain. Detailed stress analysis on Neogene sediments of the Vera and Nijar basins shows a strike-slip regime with NW–SE-oriented subhorizontal maximum principal stress (σ1) during Tortonian and earliest Messinian times. Under the influence of this stress field, dextral displacement along the N090E-trending Gafarillos fault zone resulted in deformation of the sediments of the southern Sorbas and northeastern Nijar basins. During the early Messinian a clock-wise rotation of the stress field occurred. Stress analysis in rocks with late–early Messinian up to Quaternary ages in the Nijar and Vera basins indicates a strike-slip regime with N–S-oriented subhorizontal maximum principal stress (σ1). Under the influence of this stress field the main activity along the N010E-striking Palomares strike-slip fault zone took place, resulting in deformation of the Neogene sediments of the southeastern Vera basin and culminating in a maximum sinistral displacement of more than 20 km. At the same time the stress field was not suitably oriented to exert a large shear component on the Gafarillos fault zone, which activity ended after the earliest Messinian. Fault and outcrop patterns of syntectonic Neogene sediments in the Vera basin show that displacement along the Palomares fault zone decreased at the end of the Middle Miocene although minor displacement phases may still have occurred during the Late Miocene and possibly even Pliocene. From the Middle Miocene onward, deformation in the Nijar basin was controlled by sinistral displacement along the N040E-trending Serrata strike-slip fault zone.  相似文献   

5.
During the Late Jurassic–Early Oligocene interval, widespread hydrothermal copper mineralization events occurred in association with the geological evolution of the southern segment of the central Andes, giving rise to four NS-trending metallogenic belts of eastward-decreasing age: Late Jurassic, Early Cretaceous, Late Paleocene–Early Eocene, and Late Eocene–Early Oligocene. The Antofagasta–Calama Lineament (ACL) consists of an important dextral strike-slip NE-trending fault system. Deformation along the ACL system is evidenced by a right-lateral displacement of the Late Paleocene–Early Eocene metallogenic belts. Furthermore, clockwise rotation of the Early Cretaceous Mantos Blancos copper deposit and the Late Paleocene Lomas Bayas porphyry copper occurred. In the Late Eocene–Early Oligocene metallogenic belt, a sigmoidal deflection and a clockwise rotation is observed in the ACL. The ACL is thought to have controlled the emplacement of Early Oligocene porphyry copper deposits (34–37 Ma; Toki, Genoveva, Quetena, and Opache), whereas it deflected the Late Eocene porphyry copper belt (41–44 Ma; Esperanza, Telégrafo, Centinela, and Polo Sur ore deposits). These observations suggest that right-lateral displacement of the ACL was active during the Early Oligocene. We propose that the described structural features need to be considered in future exploration programs within this extensively gravel-covered region of northern Chile.  相似文献   

6.
Models for the Tertiary evolution of SE Asia fall into two main types: a pure escape tectonics model with no proto-South China Sea, and subduction of proto-South China Sea oceanic crust beneath Borneo. A related problem is which, if any, of the main strike–slip faults (Mae Ping, Three Pagodas and Aliao Shan–Red River (ASRR)) cross Sundaland to the NW Borneo margin to facilitate continental extrusion? Recent results investigating strike–slip faults, rift basins, and metamorphic core complexes are reviewed and a revised tectonic model for SE Asia proposed. Key points of the new model include: (1) The ASRR shear zone was mainly active in the Eocene–Oligocene in order to link with extension in the South China Sea. The ASRR was less active during the Miocene (tens of kilometres of sinistral displacement), with minor amounts of South China Sea spreading centre extension transferred to the ASRR shear zone. (2) At least three important regions of metamorphic core complex development affected Indochina from the Oligocene–Miocene (Mogok gneiss belt; Doi Inthanon and Doi Suthep; around the ASRR shear zone). Hence, Paleogene crustal thickening, buoyancy-driven crustal collapse, and lower crustal flow are important elements of the Tertiary evolution of Indochina. (3) Subduction of a proto-South China Sea oceanic crust during the Eocene–Early Miocene is necessary to explain the geological evolution of NW Borneo and must be built into any model for the region. (4) The Eocene–Oligocene collision of NE India with Burma activated extrusion tectonics along the Three Pagodas, Mae Ping, Ranong and Klong Marui faults and right lateral motion along the Sumatran subduction zone. (5) The only strike–slip fault link to the NW Borneo margin occurred along the trend of the ASRR fault system, which passes along strike into a right lateral transform system including the Baram line.  相似文献   

7.
横切潍北-莱州湾凹陷郯庐断裂带的地震反射剖面和断裂带内的凹陷断层、沉积相和油气特征,直接或间接显示了郯庐断裂带的延伸、运动性质和活动时限。郯庐断裂带在海域和陆上的几何形态及其组合基本一致,根据切过断裂带的剖面和平面上断层的组合特征,判断其为兼具垂直位移的走滑运动断层系。走滑断裂带的活动控制着凹陷内同构造沉积以及构造样式,表明郯庐断裂带的活动时限具分段性,相当于渤海湾盆地孔店组(E1?2k)-沙四段(E2?3s4)沉积期(古新世-早始新世)-孔店组-沙二段(E2?3s2)沉积期(古新世-始新世)-孔店组-沙一段(E2?3s1)(古新世-渐新世)沉积时期,走滑拉分活动由南向北迁移; 活动方式也由古新世-早始新世的左旋走滑活动,被早始新世之后的右旋走滑活动所替代。  相似文献   

8.
合肥盆地的沉积作用与其东缘的郯庐断裂带演化有着良好的耦合关系。侏罗纪盆地发育主要受大别造山带演化控制,东部可见对同造山期郯庐断裂带左旋转换走滑的沉积响应。盆地内朱巷组的沉积是对早白垩世早期郯庐断裂再次发生陆内左行平移的响应,该时期成盆模式为一走滑—挠曲盆地。盆地内上白垩统—古近系的形成是对这期间郯庐断裂带伸展活动的响应,盆地具区域性伸展(双向伸展)的特征。盆地东部自新近纪以来的抬升、消亡与东缘反转构造的存在,指示了郯庐断裂带的逆冲活动。盆地东部的沉积记录结合近年来郯庐断裂带内部构造与同位素年代学的最新研究成果,指示该断裂带中-新生代经历了4个演化阶段:同造山期的左旋转换走滑、早白垩世早期的陆内左行平移、晚白垩世—古近纪的伸展运动和新近纪以来的逆冲活动。  相似文献   

9.
Fault rocks from various segments of the Periadriatic fault system (PAF; Alps) have been directly dated using texturally controlled Rb-Sr microsampling dating applied to mylonites, and both stepwise-heating and laser-ablation 40Ar/39Ar dating applied to pseudotachylytes. The new fault ages place better constraints on tectonic models proposed for the PAF, particularly in its central sector. Along the North Giudicarie fault, Oligocene (E)SE-directed thrusting (29-32 Ma) is currently best explained as accommodation across a cogenetic restraining bend within the Oligocene dextral Tonale-Pustertal fault system. In this case, the limited jump in metamorphic grade observed across the North Giudicarie fault restricts the dextral displacement along the kinematically linked Tonale fault to ~30 km. Dextral displacement between the Tonale and Pustertal faults cannot be transferred via the Peio fault because of both Late Cretaceous fault ages (74-67 Ma) and sinistral transtensive fault kinematics. In combination with other pseudotachylyte ages (62-58 Ma), widespread Late Cretaceous-Paleocene extension is established within the Austroalpine unit, coeval with sedimentation of Gosau Group sediments. Early Miocene pseudotachylyte ages (22-16 Ma) from the Tonale, Pustertal, Jaufen and Passeier faults argue for a period of enhanced fault activity contemporaneous with lateral extrusion of the Eastern Alps. This event coincides with exhumation of the Penninic units and contemporaneous sedimentation within fault-bound basins.  相似文献   

10.
郯庐断裂带的形成与演化:综述   总被引:81,自引:0,他引:81  
万天丰  朱鸿 《现代地质》1996,10(2):159-168
从历史的与整体的观点出发,综合了地质、地貌、地球化学与地球物理的资料,系统地研究了郯庐断裂带各阶段的形态学、运动学以及动力学机制。认为此断裂带开始形成于中、晚三叠世,其长度小于1500km,切割深度小于15~20km,此时最大左行走滑断距为430km左右。侏罗纪(208~135Ma)与中始新世-渐新世(52~23.3Ma),此断裂带表现为逆断层活动,断层面受挤压较紧闭。白垩纪-早始新世(135~52Ma),郯庐断裂呈现为略带右行走滑的正断层(走滑断距不超过100km),郯庐断裂带与其北部切割深度约为30~40km。中新世-更新世(23.3~0.73Ma)断裂带表现为带有左行走滑的正断层,走滑断距约50km,断裂带切割深度在50~80km之间。中更新世(0.73Ma以来)断裂带又变成略带右行走滑的逆断层,走滑断距不足100m。由于断裂带形成以来的剥蚀深度不大,地表的断层岩都是碎裂岩与断层泥。沿此断裂带在早白垩世构成了中国东部重要的内生金属成矿带。  相似文献   

11.
Balancing lateral orogenic float of the Eastern Alps   总被引:2,自引:0,他引:2  
Oligocene to Miocene post-collisional shortening between the Adriatic and European plates was compensated by frontal thrusting onto the Molasse foreland basin and by contemporaneous lateral wedging of the Austroalpine upper plate. Balancing of the upper plate shortening by horizontal retrodeformation of lateral escaping and extruding wedges of the Austroalpine lid enables an evaluation of the total post-collisional deformation of the hangingwall plate. Quantification of the north–south shortening and east–west extension of the upper plate is derived from displacement data of major faults that dissect the Austroalpine wedges. Indentation of the South Alpine unit corresponds to 64 km north–south shortening and a minimum of 120 km of east–west extension. Lateral wedging affected the Eastern Alps east of the Giudicarie fault. West of the Giudicarie fault, north–south shortening was compensated by 50 to 80 km of backthrusting in the Lombardian thrust system of the Southern Alps. The main structures that bound the escaping wedges to the north are the Inntal fault system (ca. 50 km sinistral offset), the Königsee–Lammertal–Traunsee (KLT) fault (10 km) and the Salzach–Ennstal–Mariazell–Puchberg (SEMP) fault system (60 km). These faults, as well as a number of minor faults with displacements less than 10 km, root in the basal detachment of the Alps. The thin-skinned nature of lateral escape-related structures north of the SEMP line is documented by industry reflection seismic lines crossing the Northern Calcareous Alps (NCA) and the frontal thrust of the Eastern Alps. Complex triangle zones with passive roof backthrusts of Middle Miocene Molasse sediments formed in front of the laterally escaping wedges of the northern Eastern Alps. The aim of this paper is a semiquantitative reconstruction of the upper plate of the Eastern Alps. Most of the data is published elsewhere.  相似文献   

12.
In the Boyal? area, northern Turkey, the tectonic units of the ?stanbul–Zonguldak Terrane and the IntraPontide suture zone are thrust over the deposits at the top of the Sakarya Terrane, known as Tarakl? Flysch. It consists of Early Maastrichtian–Middle Paleocene turbidite and mass-gravity deposits, whose source mainly corresponds to the ?stanbul–Zonguldak Terrane, and, with a lesser extent, to the IntraPontide suture zone. These deposits were sedimented in a foredeep basin developed during the convergence between Sakarya and Eurasian continental microplates. In the Late Paleocene–Early Eocene time span, the Tarakl? Flysch was deformed (D1 phase) during the closure of the foredeep basin. In the Miocene time, the strike-slip tectonics (D2 phase) related to the North-Anatolian fault produced further deformations of the Tarakl? Flysch.  相似文献   

13.
The Rhodope Metamorphic Province represents the core of an Alpine orogen affected by strong syn- and postorogenic extension. We report evidence for multiple phases of extensional unroofing from the western border of the Rila Mountains in the lower Rila valley, SW Bulgaria. The most prominent structure is the Rila-Pastra Normal Fault (RPNF), a major extensional fault and shear zone of Eocene to Early Oligocene age. The fault zone includes, from base to top, mylonites, ultramylonites and cataclasites, indicating deformation under progressively decreasing temperature, from amphibolite-facies to low-temperature brittle deformation. It strikes E–W with a top-to-the-N-to NW-directed sense of shear. Basement rocks in the hanging wall and footwall both display amphibolite-facies conditions. The foliation of the hanging-wall gneisses, however, is discordantly cut by the fault, while the foliation of the footwall gneisses is seen to curve into parallelism with the fault when approaching it. Two ductile splays of the RPNF occur in the footwall, which are subparallel to the foliation of the surrounding gneisses and merge laterally into the mylonites of the main fault zone. The concordance between the foliation in the footwall and the RPNF suggests that deformation and cooling in the footwall occurred simultaneously with extensional shearing, while the hanging-wall gneisses had already been exhumed previously. The RPNF is associated with thick deposits of an Early Oligocene, syntectonic breccia on top of its hanging wall. Integrating our results with previous studies, we distinguish the following stages of extensional faulting: (1) Late Cretaceous NW–SE extension (Gabrov Dol Detachment), exhumation of the present day hanging wall of the RPNF; (2) Eocene to Early Oligocene NW–SE to N–S extension (RPNF); (3) Miocene to Pliocene E–W extension (Western Border Fault), formation of the Djerman Graben; (4) Holocene to recent N–S to NW–SE extension (Stob Fault), reactivating the SW part of the Western Border Fault.  相似文献   

14.
The chronology of thrust motion in the Fuegian thin-skinned fold-thrust belt was established using data from the Atlantic coast of Tierra del Fuego. A set of original structural–geological maps showing the distribution of structures, unconformities and synorogenic sequences in the last tip of the Andes reveals the cratonward propagation of thrusts and sedimentary depocenters. A succession of syntectonic angular and progressive unconformities occur in the studied zone: (1) an angular unconformity between Danian and Late Paleocene sequences, (2) a series of progressive and syntectonic angular unconformities developed from the Late Early Eocene to the Late Eocene, and (3) a Lower Miocene syntectonic unconformity. Additional evidence for the time–space location of the thrust-front is provided by the presence of seismically triggered sand intrusions in Late Cretaceous, Late Paleocene and Middle Miocene sequences.The integration of data shows that faulting occurred in three main episodes: San Vicente thrusting, ca. 61–55 Ma, Río Bueno thrusting, ca. 49–34, and Punta Gruesa strike-slip event, ca. 24–16 Ma. San Vicente thrusting represents the onset of thrust propagation onto the foreland craton. The thrust-front endured a major cratonward migration through the Río Bueno thrusting, and remained steady afterward. Punta Gruesa constitutes a strike-slip event, associated with the phase of wrench deformation that influences the southernmost Andes since the Oligocene. Although the overall pattern of faulting was progressively younger cratonward, several episodes of out-of-sequence thrusting and folding occurred.Other features in the southernmost Andes can be linked to these three deformation events to broadly characterize the behavior of the Fuegian orogenic wedge in terms of critical taper models. The Fuegian Andes underwent at least three cycles between subcritical, critical and supercritical stages of behavior in terms of deformation, erosion, and sedimentation.  相似文献   

15.
More than 1400 km of two-dimensional seismic data were used to understand the geometries and structural evolution along the western margin of the Girardot Basin in the Upper Magdalena Valley. Horizons are calibrated against 50 wells and surface geological data (450 km of traverses). At the surface, low-angle dipping Miocene strata cover the central and eastern margins. The western margin is dominated by a series of en echelon synclines that expose Cretaceous–Oligocene strata. Most synclines are NNE–NE trending, whereas bounding thrusts are mainly NS oriented. Syncline margins are associated mostly with west-verging fold belts. These thrusts started deformation as early as the Eocene but were moderately to strongly reactivated during the Andean phase. The Girardot Basin fill records at least four stratigraphic sequences limited by unconformities. Several periods of structural deformation and uplifting and subsidence have affected the area. An early Tertiary deformation event is truncated by an Eocene unconformity along the western margin of the Girardot Basin. An Early Oligocene–Early Miocene folding and faulting event underlies the Miocene unconformity along the northern and eastern margin of the Girardot Basin. Finally, the Late Miocene–Pliocene Andean deformation folds and erodes the strata along the margins of the basin against the Central and Eastern Cordilleras.  相似文献   

16.
The ages obtained from planktonic foraminiferal assemblages retrieved from two exposures in the Gurnigel Flysch and from the re-examination of similar material gathered by previous researchers from the Voirons Flysch reveal only minor discrepancies with previous studies based on nannofossil biostratigraphy. In contrast, major divergences between this work and previous studies on the Voirons Flysch also based on planktonic foraminifera have been identified. They are generally related to distinct approaches in species classification and the use of different zonal schemes. Based on our data, the age of the Voirons Flysch extends from the Early Eocene (planktonic foraminiferal zone P7) to the Middle Eocene (planktonic foraminiferal zone P12). Contrasting with claims made in earlier studies, no specimen of Late Eocene or Early Oligocene age has been observed in the revised material. However, we cannot exclude a younger age (possibly Late Eocene) for the upper portion of this flysch from which we did not revise any sample. Thus, more research and sampling are needed to resolve this question. The palaeogeographic origin of the Voirons-Wägital complex as well as the sedimentation history of these flyschs need now to be re-evaluated in light of this revised biostratigraphic data.  相似文献   

17.
We present in this paper some new evidence for the change during the Quaternary in kinematics of faults cutting the eastern margin of the Tibetan Plateau. It shows that significant shortening deformation occurred during the Early Pleistocene, evidenced by eastward thrusting of Mesozoic carbonates on the Pliocene lacustrine deposits along the Minjiang upstream fault zone and by development of the transpressional ridges of basement rocks along the Anninghe river valley. The Middle Pleistocene seems to be a relaxant stage with local development of the intra-mountain basins particularly prominent along the Minjiang Upstream and along the southern segment of the Anninghe River Valley. This relaxation may have been duo to a local collapse of the thickened crust attained during the late Neogene to early Pleistocene across this marginal zone. Fault kinematics has been changed since the late Pleistocene, and was predominated by reverse sinistral strike-slip along the Minshan Uplift, reverse dextral strike-slip on the Longmenshan fault zone and pure sinistral strike-slip on the Anninghe fault. This change in fault kinematics during the Quaternary allows a better understanding of the mechanism by which the marginal ranges of the plateau has been built through episodic activities.  相似文献   

18.
Geologic mapping and U–Pb detrital zircon geochronologic studies of (meta)sedimentary rocks in the Damxung area (90 km north of Lhasa) of the southern Lhasa terrane in Tibet provide new insights into the history of deformation and clastic sedimentation prior to late Cenozoic extension. Cretaceous nonmarine clastic rocks 10 km southeast of Damxung are exposed as structural windows in the footwall of a thrust fault (the Damxung thrust) that carries Paleozoic strata in the hanging wall. To the north of Damxung in the southern part of the northern Nyainqentanglha Range (NNQTL), metaclastic rocks of previously inferred Paleozoic age are shown to range in depositional age from Late Cretaceous to Eocene. The metaclastic rocks regionally dip southward and are interpreted to have been structurally buried in the footwall of the Damxung thrust prior to being tectonized during late Cenozoic transtension. Along the northern flank of the NNQTL, Lower Eocene syncontractional redbeds were deposited in a triangle zone structural setting. All detrital zircon samples of Cretaceous–Eocene strata in the Damxung area include Early Cretaceous grains that were likely sourced from the Gangdese arc to the south. We suggest that the that newly recognized Late Cretaceous to Early Eocene (meta)clastic deposits and thrust faults represent the frontal and youngest part of a northward directed and propagating Gangdese retroarc thrust belt and foreland basin system that led to significant crustal thickening and elevation gain in southern Tibet prior to India-Asian collision.  相似文献   

19.
曹忠祥 《地质科学》2008,43(1):65-81
应用通过营口—潍坊断裂带及相关新生代盆地的地震剖面,采用专业软件分别计算了潍北凹陷、青东凹陷、莱州湾凹陷、黄河口凹陷、渤中凹陷、渤东凹陷、辽中凹陷和辽东凹陷的伸展量及构造沉降量,表明虽然同受断裂带走滑和软流圈上涌控制,但不同区段新生代伸展作用方向、主要发生时间和强度都有差别。南段是南北方向伸展,伸展作用主要发生在古新-始新世孔店组—沙河街组三段沉积时期;中段渤中—辽东湾南部地区具有多向伸展特征,近东西方向和南北方向伸展作用最为强烈,主要伸展作用发生在中-晚始新世、渐新世和新近纪,特别是以新近纪强烈伸展作用区别于其它地区;北段即辽东湾中-北部地区主要是北西—南东方向伸展,主要伸展活动发生在中始新世沙河街组三段和渐新世东营组沉积时期。文章总结了4种不同类型的沉降,指出新生代的构造活动随时间有自南向北推移和自两侧向中间迁移的规律,提出不同方向断裂带的活化和新近纪北东东向新生构造的形成是裂陷强度向中间迁移并产生4种不同沉降类型盆地的原因。  相似文献   

20.
The Malatya Basin is situated on the southern Taurus-Anatolian Platform. The southern part of the basin contains a sedimentary sequence which can be divided into four main units, each separated by an unconformity. From base to top, these are: (1) Permo-Carboniferous; (2) Upper Cretaceous–Lower Paleocene, (3) Middle-Upper Eocene and (4) Upper Miocene. The Upper Cretaceous–Tertiary sedimentary sequence resting on basement rocks is up to 700 m thick.The Permo-Carboniferous basement consist of dolomites and recrystallized limestones. The Upper Cretaceous–Lower Paleocene transgressive–regressive sequence shows a transition from terrestrial environments, via lagoonal to shallow-marine limestones to deep marine turbiditic sediments, followed upwards by shallow marine cherty limestones. The marine sediments contain planktic and benthic foraminifers indicating an upper Campanian, Maastrichtian and Danian age. The Middle-Upper Eocene is a transgressive–regressive sequence represented by terrestrial and lagoonal clastics, shallow-marine limestones and deep marine turbidites. The planktic and benthic foraminifers in the marine sediments indicate a Middle-Upper Eocene age. The upper Miocene sequence consists of a reddish-brown conglomerate–sandstone–mudstone alternation of alluvial and fluvial facies.During Late Cretaceous–Early Paleocene times, the Gündüzbey Group was deposited in the southern part of a fore-arc basin, simultaneously with volcanics belonging to the Yüksekova Group. During Middle-Late Eocene times, the Yeşilyurt Group was deposited in the northern part of the Maden Basin and the Helete volcanic arc. The Middle-Upper Eocene Malatya Basin was formed due to block faulting at the beginning of the Middle Eocene time. During the Late Paleocene–Early Eocene, and at the end of the Eocene, the study areas became continental due to the southward advance of nappe structures.The rock sequences in the southern part of the Malatya Basin may be divided into four tectonic units, from base to top: the lower allochthon, the upper allochthon, the parautochthon and autochthonous rock units.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号