共查询到20条相似文献，搜索用时 78 毫秒
1.
Geospatial blending to improve spatial mapping of precipitation with high spatial resolution by merging satellite‐based and ground‐based data 
下载免费PDF全文
下载免费PDF全文 Estimating accurate spatial distribution of precipitation is important for understanding the hydrologic cycle and various hydro‐environmental applications. Satellite‐based precipitation data have been widely used to measure the spatial distribution of precipitation over large extents, but an improvement in accuracy is still needed. In this study, three different merging techniques (Conditional Merging, Geographical Differential Analysis and Geographical Ratio Analysis) were used to merge precipitation estimations from Communication, Ocean and Meteorological Satellite (COMS) Rainfall Intensity data and ground‐based measurements. Merged products were evaluated with varying rain‐gauge network densities and accumulation times. The results confirmed that accuracy of detecting quantitative rainfall was improved as the accumulation time and network density increased. Also, the impact of spatial heterogeneity of precipitation on the merged estimates was investigated. Our merging techniques reproduced accurate spatial distribution of rainfall by adopting the advantages of both gauge and COMS estimates. The efficacy of the merging techniques was particularly pronounced when the spatial heterogeneity of hourly rainfall, quantified by variance of rainfall, was greater than 10 mm2/accumulation time2. Among the techniques analysed, Conditional Merging performed the best, especially when the gauge density was low. This study demonstrates the utility of the COMS Rainfall Intensity product, which has a shorter latency time (1 h) and higher spatio‐temporal resolution (hourly, 4 km by 4 km) than other widely used satellite precipitation products in estimating precipitation using merging techniques with ground‐based point measurements. The outcome has important implications for various hydrologic modelling approaches, especially for producing near real‐time products. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
2.
The infrared‐microwave rainfall algorithm (IMRA) was developed for retrieving spatial rainfall from infrared (IR) brightness temperatures (TBs) of satellite sensors to provide supplementary information to the rainfall field, and to decrease the traditional dependency on limited rain gauge data that are point measurements. In IMRA, a SLOPE technique (ST) was developed for discriminating rain/no‐rain pixels through IR image cloud‐top temperature gradient, and 243K as the IR threshold temperature for minimum detectable rainfall rate. IMRA also allows for the adjustment of rainfall derived from IR‐TB using microwave (MW) TBs. In this study, IMRA rainfall estimates were assessed on hourly and daily basis for different spatial scales (4, 12, 20, and 100 km) using NCEP stage IV gauge‐adjusted radar rainfall data, and daily rain gauge data. IMRA was assessed in terms of the accuracy of the rainfall estimates and the basin streamflow simulated by the hydrologic model, Sacramento soil moisture accounting (SAC‐SMA), driven by the rainfall data. The results show that the ST option of IMRA gave accurate satellite rainfall estimates for both light and heavy rainfall systems while the Hessian technique only gave accurate estimates for the convective systems. At daily time step, there was no improvement in IR‐satellite rainfall estimates adjusted with MW TBs. The basin‐scale streamflow simulated by SAC‐SMA driven by satellite rainfall data was marginally better than when SAC‐SMA was driven by rain gauge data, and was similar to the case using radar data, reflecting the potential applications of satellite rainfall in basin‐scale hydrologic modelling. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
3.
Including spatial distribution in a data‐driven rainfall‐runoff model to improve reservoir inflow forecasting in Taiwan 下载免费PDF全文
下载免费PDF全文 Multi‐step ahead inflow forecasting has a critical role to play in reservoir operation and management in Taiwan during typhoons as statutory legislation requires a minimum of 3‐h warning to be issued before any reservoir releases are made. However, the complex spatial and temporal heterogeneity of typhoon rainfall, coupled with a remote and mountainous physiographic context, makes the development of real‐time rainfall‐runoff models that can accurately predict reservoir inflow several hours ahead of time challenging. Consequently, there is an urgent, operational requirement for models that can enhance reservoir inflow prediction at forecast horizons of more than 3 h. In this paper, we develop a novel semi‐distributed, data‐driven, rainfall‐runoff model for the Shihmen catchment, north Taiwan. A suite of Adaptive Network‐based Fuzzy Inference System solutions is created using various combinations of autoregressive, spatially lumped radar and point‐based rain gauge predictors. Different levels of spatially aggregated radar‐derived rainfall data are used to generate 4, 8 and 12 sub‐catchment input drivers. In general, the semi‐distributed radar rainfall models outperform their less complex counterparts in predictions of reservoir inflow at lead times greater than 3 h. Performance is found to be optimal when spatial aggregation is restricted to four sub‐catchments, with up to 30% improvements in the performance over lumped and point‐based models being evident at 5‐h lead times. The potential benefits of applying semi‐distributed, data‐driven models in reservoir inflow modelling specifically, and hydrological modelling more generally, are thus demonstrated. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
This paper reports the results of an investigation into flood simulation by areal rainfall estimated from the combination of gauged and radar rainfalls and a rainfall–runoff model on the Anseong‐cheon basin in the southern part of Korea. The spatial and temporal characteristics and behaviour of rainfall are analysed using various approaches combining radar and rain gauges: (1) using kriging of the rain gauge alone; (2) using radar data alone; (3) using mean field bias (MFB) of both radar and rain gauges; and (4) using conditional merging technique (CM) of both radar and rain gauges. To evaluate these methods, statistics and hyetograph for rain gauges and radar rainfalls were compared using hourly radar rainfall data from the Imjin‐river, Gangwha, rainfall radar site, Korea. Then, in order to evaluate the performance of flood estimates using different rainfall estimation methods, rainfall–runoff simulation was conducted using the physics‐based distributed hydrologic model, Vflo?. The flood runoff hydrograph was used to compare the calculated hydrographs with the observed one. Results show that the rainfall field estimated by CM methods improved flood estimates, because it optimally combines rainfall fields representing actual spatial and temporal characteristics of rainfall. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
5.
The multisensor precipitation estimates (MPE) data, available in hourly temporal and 4 km × 4 km spatial resolution, are produced by the National Weather Service and mosaicked as a national product known as Stage IV. The MPE products have a significant advantage over rain gauge measurements due to their ability to capture spatial variability of rainfall. However, the advantages are limited by complications related to the indirect nature of remotely sensed precipitation estimates. Previous studies confirm that efforts are required to determine the accuracy of MPE and their associated uncertainties for future use in hydrological and climate studies. So far, various approaches and extensive research have been undertaken to develop an uncertainty model. In this paper, an ensemble generator is presented for MPE products that can be used to evaluate the uncertainty of rainfall estimates. Two different elliptical copula families, namely, Gaussian and t‐copula are used for simulations. The results indicate that using t‐copula may have significant advantages over the well‐known Gaussian copula particularly with respect to extremes. Overall, the model in which t‐copula was used for simulation successfully generated rainfall ensembles with similar characteristics to those of the ground reference measurements. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
6.
Limited availability of surface‐based rainfall observations constrains the evaluation of satellite rainfall products over many regions. Observations are also often not available at time scales to allow evaluation of satellite products at their finest resolutions. In the present study, we utilized a 3‐month rainfall data set from an experimental network of eight automatic gauges in Gilgel Abbay watershed in Ethiopia to evaluate the 1‐hourly, 8 × 8‐km Climate Prediction Center morphing technique (CMORPH) rainfall product. The watershed is situated in the Lake Tana basin which is the source of the Blue Nile River. We applied a suite of statistical metrics that included mean difference, bias, standard deviation of differences and measures of association. Our results indicate that the accuracy of the CMORPH product shows a significant variation across the basin area. Its estimates are mostly within ±10 mm h?1 of the gauge rainfall observations; however, the product does not satisfactorily capture the rainfall temporal variability and is poorly correlated (<0.27) to gauge observations. Its poor rain detection capability led to significant underestimation of the seasonal rainfall depth (total bias reaches up to ?52%) with large amounts of hit rain bias as well as missed rain and false rain biases. In the future refinement of CMORPH algorithm, more attention should be given to reducing missed rain bias over the mountains of Gilgel Abbay, whereas equal attention should be given to hit, missed rain and false rain biases over other parts of the watershed. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
7.
Pabitra Gurung 《水文科学杂志》2017,62(1):114-123
This study is about use of spatially distributed rain in physically based hydrological models. In recent years, spatially distributed radar rainfall data have become available. The distributed radar rain is used to precisely model hydrologic processes and it is more realistic than the past practice of distribution methods like Thiessen polygons. Radar provides a highly accurate spatial distribution of rainfall and greatly improves the basin average rainfall estimates. However, quantification of the exact amount of rainfall from radar observation is relatively difficult. Thus, the fundamental idea of this study is to apply hourly gauge and radar rainfall data in a distributed hydrological model to simulate hydrological parameters. Hence the comparison is made between the outcomes of the WetSpa model from radar rainfall distribution and gauge rainfall distributed by the Thiessen polygon technique. The comparative plots of the hydrograph and the results of hydrological components such as evapotranspiration, surface runoff, soil moisture, recharge and interflow, reflect the spatially distributed radar input performing well for model outflow simulation.
EDITOR D. KoutsoyiannisASSOCIATE EDITOR F. Pappenberger 相似文献
8.
Quantification of rainfall and its spatial and temporal variability is extremely important for reliable hydrological and meteorological modeling. While rain gauge measurements do not provide reasonable areal representation of rainfall, remotely sensed precipitation estimates offer much higher spatial resolution. However, uncertainties associated with remotely sensed rainfall estimates are not well quantified. This issue is important considering the fact that uncertainties in input rainfall are the main sources of error in hydrologic processes. Using an ensemble of rainfall estimates that resembles multiple realizations of possible true rainfall, one can assess uncertainties associated with remotely sensed rainfall data. In this paper, ensembles are generated by imposing rainfall error fields over remotely sensed rainfall estimates. A non-Gaussian copula-based model is introduced for simulation of rainfall error fields. The v-transformed copula is employed to describe the dependence structure of rainfall error estimates without the influence of the marginal distribution. Simulations using this model can be performed unconditionally or conditioned on ground reference measurements such that rain gauge data are honored at their locations. The presented model is implemented for simulation of rainfall ensembles across the Little Washita watershed, Oklahoma. The results indicate that the model generates rainfall fields with similar spatio-temporal characteristics and stochastic properties to those of observed rainfall data. 相似文献
9.
This paper provides a comparison of gauge and radar precipitation data sources during an extreme hydrological event. November–December 2006 was selected as a time period of intense rainfall and large river flows for the Severn Uplands, an upland catchment in the United Kingdom. A comparison between gauge and radar precipitation time‐series records for the event indicated discrepancies between data sources, particularly in areas of higher elevation. The HEC‐HMS rainfall‐runoff model was selected to assess the accuracy of the precipitation to simulate river flows for the extreme event. Gauge, radar and gauge‐corrected radar rainfall were used as model inputs. Universal cokriging was used to geostatistically interpolate gauge data with radar and elevation data as covariates. This interpolated layer was used to calculate the mean‐field bias and correct the radar composites. Results indicated that gauge‐ and gauge‐corrected radar‐driven models replicated flows adequately for the extreme event. Gauge‐corrected flow predictions produced an increase in flow prediction accuracy when compared with the raw radar, yet predictions were comparative in accuracy to those using the interpolated gauge network. Subsequent investigations suggested this was due to an adequate spatial and temporal resolution of the precipitation gauge network within the Severn Uplands. Results suggested that the six rain gauges could adequately represent precipitation variability of the Severn Uplands to predict flows at an approximately equal accuracy to that obtained by radar. Temporally, radar produced an increase in flow prediction accuracy in mountainous reaches once the gauge time step was in excessive of an hourly interval. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
10.
Evaluation and hydrologic validation of TMPA satellite precipitation product downstream of the Pearl River Basin,China 总被引：1，自引：0，他引：1 下载免费PDF全文
下载免费PDF全文 With high spatio‐temporal resolution and wide coverage, satellite‐based precipitation products can potentially fill the deficiencies of traditional in situ gauge precipitation observations and provide an alternative data source for ungauged areas. However, due to the relatively poor accuracy and high uncertainty of satellite‐based precipitation products, it remains necessary to assess the quality and applicability of the products for each investigated area. This study evaluated the accuracy and error of the latest Tropical Rainfall Measuring Mission Multi‐satellites Precipitation Analysis 3B42‐V7 satellite‐based precipitation product and validated the applicability of the product for the Beijiang and Dongjiang River Basins, downstream of the Pearl River Basin in China. The study first evaluated the accuracy, error, and bias of the 3B42‐V7 product during 1998–2006 at daily and monthly scale via comparison with in situ observations. The study further validated the applicability of the product via hydrologic simulation using the variable infiltration capacity hydrological model for three hydrological stations in the Beijiang River Basin, considering two scenarios: a streamflow simulation with gauge‐calibrated parameters (Scenario I) and a simulation after recalibration with the 3B42‐V7 product (Scenario II). The results revealed that (a) the 3B42‐V7 product produced acceptable accuracy both at the daily scale and high accuracy at the monthly scale while generally tending to overestimate precipitation; (b) the product clearly overestimated the frequency of no rainfall events at the grid cell scale and light rainfall (<1 mm/day) events at the region scale and also overestimated the amount of heavy rain (25–50 mm/day) and hard rain (≥50 mm/day) events; (c) under Scenario I, the 3B42‐V7 product performed poorly at three stations with gauge‐calibrated parameters; under Scenario II, the recalibrated model provided significantly improved performance of streamflow simulation with the 3B42‐V7 product; (d) the variable infiltration capacity model has the ability to reveal the hydrological characteristics of the karst landform in the Beijiang Basin when using the 3B42‐V7 product. 相似文献
11.
Evaluation and hydrological application of precipitation estimates derived from PERSIANN‐CDR,TRMM 3B42V7, and NCEP‐CFSR over humid regions in China 下载免费PDF全文
下载免费PDF全文 Satellite‐based and reanalysis quantitative precipitation estimates are attractive for hydrologic prediction or forecasting and reliable water resources management, especially for ungauged regions. This study evaluates three widely used global high‐resolution precipitation products [Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks‐Climate Data Record (PERSIANN‐CDR), Tropical Rainfall Measuring Mission 3B42 Version 7 (TRMM 3B42V7), and National Centers for Environment Prediction‐Climate Forecast System Reanalysis (NCEP‐CFSR)] against gauge observations with seven statistical indices over two humid regions in China. Furthermore, the study investigates whether the three precipitation products can be reliably utilized as inputs in Soil and Water Assessment Tool, a semi‐distributed hydrological model, to simulate streamflows. Results show that the precipitation estimates derived from TRMM 3B42V7 outperform the other two products with the smallest errors and bias, and highest correlation at monthly scale, which is followed by PERSIANN‐CDR and NCEP‐CFSR in this rank. However, the superiority of TRMM 3B42V7 in errors, bias, and correlations is not warranted at daily scale. PERSIANN‐CDR and 3B42V7 present encouraging potential for streamflow prediction at daily and monthly scale respectively over the two humid regions, whilst the performance of NCEP‐CFSR for hydrological applications varies from basin to basin. Simulations forced with 3B42V7 are the best among the three precipitation products in capturing daily measured streamflows, whilst PERSIANN‐CDR‐driven simulations underestimate high streamflows and high streamflow simulations driven by NCEP‐CFSR mostly are overestimated significantly. In terms of extreme events analysis, PERSIANN‐CDR often underestimates the extreme precipitation, so do extreme streamflow simulations forced with it. NCEP‐CFSR performs just the reverse, compared with PERSIANN‐CDR. The performance pattern of TRMM 3B42V7 on extremes is not certain, with coexisting underestimation and overestimation. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
12.
Intense Mediterranean precipitation can generate devastating flash floods. A better understanding of the spatial structure of intense rainfall is critical to better identify catchments that will produce strong hydrological responses. We focus on two intense Mediterranean rain events of different types that occured in 2002. Radar and rain gauge measurements are combined to have a data set with a high spatial (1 × 1 km2) and temporal (5 min) resolution. Two thresholds are determined using the quantiles of the rain rate values, corresponding to the precipitating system at large and to the intense rain cells. A method based on indicator variograms associated with the thresholds is proposed in order to automatically quantify the spatial structure at each time step during the entire rain events. Therefore, its variability within intense rain events can be investigated. The spatial structure is found to be homogeneous over periods that can be related to the dynamics of the events. Moreover, a decreasing time resolution (i.e., increasing accumulation period) of the rain rate data will stretch the spatial structure because of the advection of rain cells by the wind. These quantitative characteristics of the spatial structure of intense Mediterranean rainfall will be useful to improve our understanding of the dynamics of flash floods. 相似文献
13.
Capabilities of satellite precipitation datasets to estimate heavy precipitation rates at different temporal accumulations 下载免费PDF全文
下载免费PDF全文 The importance of satellite datasets as alternative sources of precipitation information has been argued in numerous studies. Future developments in satellite precipitation algorithms as well as utilization of satellite data in operational applications rely on a more in‐depth understanding of satellite errors and biases across different spatial and temporal scales. This paper investigates the capability of satellite precipitation data sets with respect to detecting heavy precipitation rates over different temporal accumulations. In this study, the performance of Tropical Rainfall Measuring Mission real time (TRMM‐RT), Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks and CPC MORPHing (CMORPH) is compared against radar‐based gauge‐adjusted Stage IV data. The results show that none of the high temporal resolution (3‐h) datasets are ideal for detecting heavy precipitation rates. In fact, the detection skill of all products drops as the precipitation thresholds (i.e. 75 and 90 percentiles) increase. At higher temporal accumulations (6, 12 and 24 h), the detection skill improves for all precipitation products, with CMORPH showing a better detection skill compared to all other products. On the other hand, all precipitation products exhibit high false alarm ratios above the heavy precipitation thresholds, although TRMM‐RT lead to a relatively smaller level of false alarms. These results indicate that further efforts are necessary to improve the precipitation algorithms so that they can capture heavy precipitation rates more reliably. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
14.
The temporal‐spatial resolution of input data‐induced uncertainty in a watershed‐based water quality model, Hydrologic Simulation Program‐FORTRAN (HSPF), is investigated in this study. The temporal resolution‐induced uncertainty is described using the coefficient of variation (CV). The CV is found to decrease with decreasing temporal resolution and follow a log‐normal relation with time interval for temperature data while it exhibits a power‐law relation for rainfall data. The temporal‐scale uncertainties in the temperature and rainfall data follow a general extreme value distribution and a Weibull distribution, respectively. The Nash‐Sutcliffe coefficient (NSC) is employed to represent the spatial resolution induced uncertainty. The spatial resolution uncertainty in the dissolved oxygen and nitrate‐nitrogen concentrations simulated using HSPF is observed to follow a general extreme value distribution and a log‐normal distribution, respectively. The probability density functions (PDF) provide new insights into the effect of temporal‐scale and spatial resolution of input data on uncertainties involved in watershed modelling and total maximum daily load calculations. This study exhibits non‐symmetric distributions of uncertainty in water quality modelling, which simplify weather and water quality monitoring and reducing the cost involved in flow and water quality monitoring. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
Cokriging for enhanced spatial interpolation of rainfall in two Australian catchments 总被引：1，自引：0，他引：1 下载免费PDF全文
下载免费PDF全文 Rainfall data in continuous space provide an essential input for most hydrological and water resources planning studies. Spatial distribution of rainfall is usually estimated using ground‐based point rainfall data from sparsely positioned rain‐gauge stations in a rain‐gauge network. Kriging has become a widely used interpolation method to estimate the spatial distribution of climate variables including rainfall. The objective of this study is to evaluate three geostatistical (ordinary kriging [OK], ordinary cokriging [OCK], kriging with an external drift [KED]), and two deterministic (inverse distance weighting, radial basis function) interpolation methods for enhanced spatial interpolation of monthly rainfall in the Middle Yarra River catchment and the Ovens River catchment in Victoria, Australia. Historical rainfall records from existing rain‐gauge stations of the catchments during 1980–2012 period are used for the analysis. A digital elevation model of each catchment is used as the supplementary information in addition to rainfall for the OCK and kriging with an external drift methods. The prediction performance of the adopted interpolation methods is assessed through cross‐validation. Results indicate that the geostatistical methods outperform the deterministic methods for spatial interpolation of rainfall. Results also indicate that among the geostatistical methods, the OCK method is found to be the best interpolator for estimating spatial rainfall distribution in both the catchments with the lowest prediction error between the observed and estimated monthly rainfall. Thus, this study demonstrates that the use of elevation as an auxiliary variable in addition to rainfall data in the geostatistical framework can significantly enhance the estimation of rainfall over a catchment. 相似文献
16.
Francesca Bruno Daniela Cocchi Fedele Greco Elena Scardovi 《Stochastic Environmental Research and Risk Assessment (SERRA)》2014,28(5):1235-1245
Rainfall is a phenomenon difficult to model and predict, for the strong spatial and temporal heterogeneity and the presence of many zero values. We deal with hourly rainfall data provided by rain gauges, sparsely distributed on the ground, and radar data available on a fine grid of pixels. Radar data overcome the problem of sparseness of the rain gauge network, but are not reliable for the assessment of rain amounts. In this work we investigate how to calibrate radar measurements via rain gauge data and make spatial predictions for hourly rainfall, by means of Monte Carlo Markov Chain algorithms in a Bayesian hierarchical framework. We use zero-inflated distributions for taking zero-measurements into account. Several models are compared both in terms of data fitting and predictive performances on a set of validation sites. Finally, rainfall fields are reconstructed and standard error estimates at each prediction site are shown via easy-to-read spatial maps. 相似文献
17.
The mesoscale Numerical Weather Prediction (NWP) model is gaining popularity among the hydrometeorological community in providing high‐resolution rainfall forecasts at the catchment scale. Although the performance of the model has been verified in capturing the physical processes of severe storm events, the modelling accuracy is negatively affected by significant errors in the initial conditions used to drive the model. Several meteorological investigations have shown that the assimilation of real‐time observations, especially the radar data can help improve the accuracy of the rainfall predictions given by mesoscale NWP models. The aim of this study is to investigate the effect of data assimilation for hydrological applications at the catchment scale. Radar reflectivity together with surface and upper‐air meteorological observations is assimilated into the Weather Research and Forecasting (WRF) model using the three‐dimensional variational data‐assimilation technique. Improvement of the rainfall accumulation and its temporal variation after data assimilation is examined for four storm events in the Brue catchment (135.2 km2) located in southwest England. The storm events are selected with different rainfall distributions in space and time. It is found that the rainfall improvement is most obvious for the events with one‐dimensional evenness in either space or time. The effect of data assimilation is even more significant in the innermost domain which has the finest spatial resolution. However, for the events with two‐dimensional unevenness of rainfall, i.e. the rainfall is concentrated in a small area and in a short time period, the effect of data assimilation is not ideal. WRF fails in capturing the whole process of the highly convective storm with densely concentrated rainfall in a small area and a short time period. A shortened assimilation time interval together with more efficient utilisation of the weather radar data might help improve the effectiveness of data assimilation in such cases. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
18.
It is critical to understand and quantify the temporal and spatial variability in hillslope hydrological data in order to advance hillslope hydrological studies, evaluate distributed parameter hydrological models, analyse variability in hydrological response of slopes and design efficient field data sampling networks. The spatial and temporal variability of field‐measured pore‐water pressures in three residual soil slopes in Singapore was investigated using geostatistical methods. Parameters of the semivariograms, namely the range, sill and nugget effect, revealed interesting insights into the spatial structure of the temporal situation of pore‐water pressures in the slopes. While informative, mean estimates have been shown to be inadequate for modelling purposes, indicator semivariograms together with mean prediction by kriging provide a better form of model input. Results also indicate that significant temporal and spatial variability in pore‐water pressures exists in the slope profile and thereby induces variability in hydrological response of the slope. Spatial and temporal variability in pore‐water pressure decreases with increasing soil depth. The variability decreases during wet conditions as the slope approaches near saturation and the variability increases with high matric suction development following rainfall periods. Variability in pore‐water pressures is greatest at shallow depths and near the slope crest and is strongly influenced by the combined action of microclimate, vegetation and soil properties. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
19.
Muhammad Ilyas Abro Ming Wei Asghar Ali Majidano Murad Ali Khaskheli Zain Ul Abideen 《水文科学杂志》2019,64(16):1957-1971
ABSTRACTMultisource rainfall products can be used to overcome the absence of gauged precipitation data for hydrological applications. This study aims to evaluate rainfall estimates from the Chinese S-band weather radar (CINRAD-SA), operational raingauges, multiple satellites (CMORPH, ERA-Interim, GPM, TRMM-3B42RT) and the merged satellite–gauge rainfall products, CMORPH-GC, as inputs to a calibrated probability distribution model (PDM) on the Qinhuai River Basin in Nanjing, China. The Qinhuai is a middle-sized catchment with an area of 799 km2. All sources used in this study are capable of recording rainfall at high spatial and temporal resolution (3 h). The discrepancies between satellite and radar data are analysed by statistical comparison with raingauge data. The streamflow simulation results from three flood events suggest that rainfall estimates using CMORPH-GC, TRMM-3B42RT and S-band radar are more accurate than those using the other rainfall sources. These findings indicate the potential to use satellite and radar data as alternatives to raingauge data in hydrological applications for ungauged or poorly gauged basins. 相似文献
20.
A multi‐source precipitation estimation approach to fill gaps over a radar precipitation field: a case study in the Colorado River Basin 下载免费PDF全文
下载免费PDF全文 The present work develops an approach to seamlessly blend satellite, available radar, climatological and gauge precipitation products to fill gaps in ground‐based radar precipitation field. To mix different precipitation products, the error of any of the products relative to each other should be removed. For bias correction, the study uses an ensemble‐based method that aims to estimate spatially varying multiplicative biases in SPEs using a radar precipitation product. A weighted successive correction method (SCM) is used to make the merging between error corrected satellite and radar precipitation estimates. In addition to SCM, we use a combination of SCM and Bayesian spatial model for merging the rain gauges (RGs) and climatological precipitation sources with radar and SPEs. We demonstrated the method using a satellite‐based hydro‐estimator; a radar‐based, stage‐II; a climatological product, Parameter‐elevation Regressions on Independent Slopes Model and a RG dataset for several rain events from 2006 to 2008 over an artificial gap in Oklahoma and a real radar gap in the Colorado River basin. Results show that: the SCM method in combination with the Bayesian spatial model produced a precipitation product in good agreement with independent measurements. The study implies that using the available radar pixels surrounding the gap area, RG, Parameter‐elevation Regressions on Independent Slopes Model and satellite products, a radar‐like product is achievable over radar gap areas that benefit the operational meteorology and hydrology community. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献