首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 38 毫秒
1.
The rhyolitic dome in the Rangan area has been subjected to hydrothermal alterations by two different systems, (1) A fossil magmatic–hydrothermal system with a powerful thermal engine of a deep monzodioritic magma, (2) An active hydrothermal system dominated by meteoric water. Based on mineralogical and geochemical studies, three different alteration facies have been identified (phyllic, advanced argillic and silicic) with notable differences in REE and other trace elements behaviour. In the phyllic alteration zone with assemblage minerals such as sericite, pyrite, quartz, kaolinite, LREE are relatively depleted whereas HREE are enriched. The advanced argillic zone is identified by the presence of alunite–jarosite and pyrophyllite as well as immobility of LREE and depletion in HREE. In the silicic zone, most of LREE are depleted but HREE patterns are unchanged compared to their fresh rock equivalents. All the REE fractionation ratios (La/Yb)cn, (La/Sm)cn, (Tb/Yb)cn, (Ce/Ce1)cn and (Eu/Eu1)cn are low in the phyllic altered facies. (Eu/Eu1)cn in both advanced and silicic facies is low too. In all alteration zones, high field strength elements (HFSE) (e.g. Ti, Zr, Nb) are depleted whereas transition elements (e.g. V, Cr, Co, Ni, Fe) are enriched. Geochemically speaking, trace and rare earth elements behave highly selective in different facies.  相似文献   

2.
The 1.5 km-large hydrothermal system of Balya is characterized by three alteration styles which from the outer halo towards the center are: (i) propylitic alteration with the hydrothermal mineral assemblage of calcite-daphnite-albite-epidote-quartz-pyrite; (ii) argillic/phyllic alteration with the hydrothermal mineral assemblage of sericite/muscovite-kaolinite-rutile-quartz ± pyrite; (iii) advanced argillic alteration with the hydrothermal mineral assemblage of alunite-jarosite-kaolinite-quartz-sericite ± pyrite. Hornblende andesite is the protolith of the hydrothermal alteration system. Enrichment in Si, Sb and Rb, and depletion in Na, Ca, Mg, Fe, Mn, P, Ba, Sr, and Zn distinguishes the argillic/phyllic and advanced alteration types from propylitic alteration and the unaltered hornblende andesite protolith. REE distribution patterns indicate an essentially immobile behaviour of REEs during the alteration cycle. K-Ar age data for unaltered and hydrothermally altered rocks define a synchronous age of 25.3 ± 1.2 Ma for both igneous and hydrothermal activity.  相似文献   

3.
A rhyolitic hyaloclastite from Ponza Island, Italy, was hydrothermally altered, producing four distinct alteration zones based on X-ray diffraction mineralogy and field textures: (1) nonpervasive argillic zone; (2) propylitic zone; (3) silicic zone; and (4) sericitic zone. The unaltered hyaloclastite is volcanic breccia with clasts of vesiculated obsidian in a matrix of predominantly pumice lapilli. Incomplete alteration of the hyaloclastite resulted in the nonpervasive argillic zone, characterized by smectite and disordered opal-CT. The other three zones exhibit more complete alteration of the hyaloclastite. The propylitic zone is characterized by mixed-layer illite-smectite (I-S) with 10 to 85% I, mordenite, opal-C, and authigenic K-feldspar (akspar). The silicic zone is characterized by I-S with ≥90% I, pure illite, quartz, akspar, and occasional albite. The sericitic zone consists primarily of I-S with ≥66% I, pure illite, quartz, and minor akspar and pyrite. K/Ar dates of I-S indicate hydrothermal alteration occurred at 3.38 ± 0.08 Ma.Oxygen isotope compositions of I-S systematically decrease from zones 1 to 4. In the argillic zone, smectite has δ18O values of 21.7 to 22.0‰ and I-S from the propylitic, silicic, and sericitic zones ranges from 14.5 to 16.3‰, 12.5 to 14.0‰, and 8.6 to 11.9‰, respectively. δ18O values for quartz from the silicic and sericitic zones range from 12.6 to 15.9‰. By use of isotope fractionation equations and data from authigenic quartz-hosted primary fluid inclusions, alteration temperatures ranged from 50 to 65°C for the argillic zone, 85 to 125°C for the propylitic zone, 110 to 210°C for the silicic zone, and 145 to 225°C for the sericitic zone. Fluid inclusion data and calculated δ18Owater values indicate that hydrothermal fluids were seawater dominated.Mass-transfer calculations indicate that hydrothermal alteration proceeded in a relatively open chemical system and alteration in the sericitic zone involved the most extensive loss of chemical species, especially Si. Systematic gains in Mg occur in all alteration zones as a result of I-S clay mineral formation, and systematic losses of Na, Ca, and K occur in most zones. With the exception of Ca, calculations of mass transfer associated with hydrothermal alteration on Ponza agree with chemical fluxes observed in laboratory experiments involving hydrothermal reactions of rhyolite and seawater. The anomalous Ca loss at Ponza may be due to hydrothermal formation of anhydrite and later low-temperature dissolution. On the basis of Mg enrichments derived from circulating seawater, we estimate the following minimum water/rock ratios: 9, 3, 6, and 9 for the argillic, propylitic, silicic, and sericitic zones, respectively. Hydrothermal fluid pH for the propylitic and silicic zones was neutral to slightly basic and relatively acidic for the sericitic zone as a result of condensation of carbonic and perhaps other acids.  相似文献   

4.
The Darrehzar porphyry Cu-Mo deposit is located in Southwestern Iran (～70 km southwest of Kerman City). The porphyries occur as Tertiary quartz-monzonite stocks and dikes, ranging in composition from microdiorite to diorite and granodiorite. The Darrehzar stock is highly altered, and even in the outermost part of the intrusion, it is not possible to find completely fresh rock. Surface weathering was developing ferrous Fe-rich lithologic units in leached zone and concentrated copper minerals in supergene zone. Unlike eastern areas which do not account for deep faults, the supergene zone is well developed in western areas with maximum of 118 m thickness. Hydrothermal alteration and mineralization at Darrehzar are centered on the stock and were broadly synchronous with its emplacement. Early hydrothermal alteration was dominantly potassic and propylitic, and was followed by later phyllic and argillic alteration. The hydrothermal system involved both magmatic and meteoric water and boiled extensively. Copper mineralization was accompanied by both potassic and phyllic alteration. Four main vein groups have been identified: (I) quartz?+?pyrite?±?molybdenite?±?anhydrite?±?K-feldspar?±?chalcopyrite?±?bornite?±?Cu and Fe oxidic minerals (peripheral); (II) quartz?+?chalcopyrite?+?pyrite?+?molybdenite; (III) quartz?+?pyrite?±?calcite?±?chalcopyrite?±?anhydrite (gypsum); and (IV) quartz or calcite, gypsum or ± pyrite. Based on abundance, nature, and phases number observed at room temperature, three types of fluid inclusions are typically observed in these veins: (1) vapor-rich, (2) liquid-rich, and (3) multi-phase. Early hydrothermal alteration was caused by high temperature, high salinity orthomagmatic fluid and produced a potassic assemblage. Phyllitic alteration was caused by high salinity and lower temperature orthomagmatic fluid. Magmatic and meteoric water mixture was developed in the peripheral part of the stock and caused propylitic alteration which is attributed to a liquid-rich, lower temperature.  相似文献   

5.
Porphyry Cu-Mo-Au mineralisation with associated potassic and phyllic alteration, an advanced argillic alteration cap and epithermal quartz-sulphide-gold-anhydrite veins, are telescoped within a vertical interval of 400-800 m on the northeastern margin of the Thames district, New Zealand. The geological setting is Jurassic greywacke basement overlain by Late Miocene andesitic-dacitic rocks that are extensively altered to propylitic and argillic assemblages. The porphyry Cu-Mo-Au mineralisation is hosted in a dacite porphyry stock and surrounding intrusion breccia. Relicts of a core zone of potassic K-feldspar-magnetite-biotite alteration are overprinted by phyllic quartz-sericite-pyrite or intermediate argillic chlorite-sericite alteration assemblages. Some copper occurs in quartz-magnetite-chlorite-pyrite-chalcopyrite veinlets in the core zone, but the bulk of the copper and the molybdenum are associated with the phyllic alteration as disseminated chalcopyrite and as molybdenite-sericite-carbonate veinlets. The advanced argillic cap has a quartz-alunite-dickite core, which is enveloped by an extensive pyrophyllite-diaspore-dickite-kaolinite assemblage that overlaps with the upper part of the phyllic alteration zone. Later quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins occur within and around the margins of the porphyry intrusion, and are associated with widespread illite-carbonate (argillic) alteration. Multiphase fluid inclusions in quartz stockwork veins associated with the potassic alteration trapped a highly saline (50-84 wt% NaCl equiv.) magmatic fluid at high temperatures (450 to >600 °C). These hypersaline brines were probably trapped at a pressure of about 300 bar, corresponding to a depth of 1.2 km under lithostatic conditions. This shallow depth is consistent with textures of the host dacite porphyry and reconstruction of the volcanic stratigraphy. Liquid-rich fluid inclusions in the quartz stockwork veins and quartz phenocrysts trapped a lower salinity (3-20 wt% NaCl equiv.), moderate temperature (300-400 °C) fluid that may have caused the phyllic alteration. Fluid inclusions in the quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins trapped dilute (1-3 wt% NaCl equiv.) fluids at 250 to 320 °C, at a minimum depth of 1.0 km under hydrostatic conditions. Oxygen isotopic compositions of the fluids that deposited the quartz stockwork veins fall within the 6 to 10‰ range of magmatic waters, whereas the quartz-sulphide-gold-anhydrite veins have lower '18Owater values (-0.6 to 0.5‰), reflecting a local meteoric water (-6‰) influence. A '18O versus 'D plot shows a trend from magmatic water in the quartz stockwork veins to a near meteoric water composition in kaolinite from the advanced argillic alteration. Data points for pyrophyllite and the quartz-sulphide-gold-anhydrite veins lie about midway between the magmatic and meteoric water end-member compositions. The spatial association between porphyry Cu-Mo-Au mineralisation, advanced argillic alteration and quartz-sulphide-gold-anhydrite veins suggests that they are all genetically part of the same hydrothermal system. This is consistent with K-Ar dates of 11.6-10.7 Ma for the intrusive porphyry, for alunite in the advanced argillic alteration, and for sericite selvages from quartz-gold veins in the Thames district.  相似文献   

6.
Altered and mineralised rocks at Peak Hill, are confined to a 300–500 m wide, north-south striking, steeply dipping, shear zone that is flanked by the Mingelo Volcanics along its western side, and Cotton Formation siltstones along its eastern side. This shear zone is defined by extensive zones of cataclasite and strongly foliated micaceous schists in marked contrast to the largely undeformed nature of the adjacent rocks. Advanced argillic assemblages (quartz-kaolinite-pyrite ± alunite ± illite) occur throughout the core of the Peak Hill deposit. Propylitic assemblages, including albite, quartz, interlayered chlorite-smectite, illite and ankerite, and a narrow discontinuous zone of argillic (quartz-illite-pyrite) alteration are developed in the Mingelo Volcanics along the western side of the deposit. Propylitic, argillic and advanced argillic assemblages are overprinted by an internally zoned phase of phyllosilicate alteration that grades inwards from a peripheral sericite-clay-chlorite assemblage, through phyllic assemblages (muscovite/illite-pyrite ± paragonite) to a pyrophyllite-pyrite ± diaspore ± andalusite altered core. Au-Cu mineralisation is hosted by barite-pyrite veins that cut the advanced argillic assemblage, but pre-date the phyllosilicate-dominated alteration. Native Au (lacking Ag), calaverite, Te-rich tennantite-tetrahedrite (goldfieldite), chalcopyrite, covellite and chalcocite occur in the barite-pyrite veins. No ore-bearing minerals were detected in any of the alteration assemblages. The total gold content of the Peak Hill deposit is currently 720 K ounces and this includes 100 K ounces of unmined reserves. Within the shear zone phyllosilicate minerals are developed in strain shadows and partly define the stretching lineation associated with dip-slip movement. The zonation within the phyllosilicate assemblages mimics the geometry of bends in the shear zone and minor internal structures. These textures indicate that the phyllosilicate alteration developed synchronous with movement on the shear zone. Earlier advanced argillic alteration and mineralisation are developed in rocks derived from both sides of the shear zone. Hydrothermal activity associated with the earlier advanced argillic alteration was therefore either synchronous with juxtaposition of these distinct rock units, or occurred during a later phase of movement on the shear zone. Cross-cutting fibrous textures in the auriferous barite-pyrite veins indicate that repeated fracturing of the advanced argillic altered rocks accompanied development of successive generations of auriferous veins. Concentrations of auriferous veins are localised in steeply plunging shoots that are oriented parallel to the stretching lineation in the shear zone. These features all indicate movement on the host shear zone accompanied each phase of hydrothermal activity in the Peak Hill deposit. The location, alteration zonation and distribution of mineralised veins within the deposit are intimately controlled by deformation on the host shear zone synchronous with hydrothermal activity. The development of high-sulphidation hydrothermal systems synchronous with deformation along brittle-ductile shear zones is a predictable consequence of intrusive activity during deformation in areas characterised by a high geothermal gradient. The close relationship between tectonism and hydrothermal activity indicates that these deposits are likely to be located in the vicinity of regional-scale shear zones. Deposits are likely to be aligned parallel to the regional-scale structural “grain” and restricted to areas of conspicuous deformation as is the case at Peak Hill (and Temora, NSW). Aluminous alteration zones concentrated in the vicinity of regional-scale structures in the Carolina Slate Belt may be a further example of this style of hydrothermal activity. Received: 30 September 1996 / Accepted: 28 August 1997  相似文献   

7.
Agua Rica (27°26′S–66°16′O) is a world class Cu–Au–Mo deposit located in Catamarca, Argentina. In the E–W 6969400 section examined, the Seca Norte and the Trampeadero porphyries that have intruded the metasedimentary rock are cut by interfingered igneous and hydrothermal heterolithic and monolithic breccias, and sandy dikes. Relic biotite and K-feldspar of the early potassic alteration (370° to > 550 °C) with Cu (Mo–Au) mineralization are locally preserved and encapsulated in a widespread, white mica + quartz + rutile or anatase halo (phyllic alteration) with pyrite + covellite that suggests fluids with temperatures ≤ 360 °C and high f(S2). The Trampeadero porphyry and the surrounding metasedimentary rock with phyllic alteration have molybdenite in stringers and B-type quartz veinlets and the highest Mo grades (> 1000 ppm).Multistage advanced argillic alteration overprinted the earlier stages. Early andalusite ± pyrite ± quartz is preserved in the roots of the argillic halo rimmed by an alumina–silica material and white micas. This alteration assemblage is considered to have been formed at temperatures ≥ 375 °C from condensed magmatic vapor. At higher levels, pyrophyllite replaces muscovite and illite in clasts of hydrothermal breccias in the center and east sector of the study section, suggesting temperatures of 280 to 360 °C. Clasts of vuggy silica in the uppermost levels of the central breccia, indicates that at lower temperatures (< 250 °C), fluids reached very low pH (pH < 2). In this early stage of the advanced argillic alteration, hydrothermal fluids seem to have not precipitated sulfides or sulfosalts.Hydrothermal brecciation was concurrent with fluid exsolution (↑? V), which precipitated intermediate-temperature advanced argillic alunite (svanbergite + woodhouseite) ± diaspore ± zunyite as breccia cement along with abundant covellite + pyrite + enargite ± native sulfur ± kuramite at intermediate depths and in lateral transitional zones to unbrecciated rocks. This mineral assemblage indicates temperatures near 300 °C, oxidized and silica-undersaturated hydrothermal fluids with high sulfur fugacity to prevent gold precipitation. Multiple generations of pyrite, emplectite, colusite, Pb- and Bi-bearing sulfosalts, and native sulfur with Au and Ag, accompanied by alunite introduction in the upper level breccias, probably occurred at lower temperatures, but still high sulfur and oxygen activity. An independent Zn and Pb (as galena) mineralization stage locally coincides with Au–Ag and sulfosalts, and advanced at depth, controlled by fractures and overprinting much of the previous mineralization. A later paragenesis of veinlets of alunite + woodhouseite + svanvergite + pyrite ± enargite that cut the phyllic halo suggests temperatures ~ 250 °C and without woodhouseite + svanvergite, temperatures ~ 200 °C. Kaolinite occurs in the phyllic halo as a late mineral in clots and in veinlets thus, in this zone, the fluid had cooled enough for its formation.  相似文献   

8.
Visible near infrared and shortwave infrared (VNIR-SWIR, 350 to 2500 nm) reflectance spectra obtained from an analytical spectral device (ASD) have been used to define alteration zones adjacent to porphyry copper deposits (PCDs), in the central part of Kerman magmatic arc, SE Iran. The spectral analysis identified sericite, illite, halloysite, montmorillonite, dickite, kaolinite, pyrophyllite, biotite, chlorite, epidote, calcite, jarosite, and iron oxyhydroxides (e.g. hematite, goethite) of hydrothermal and supergene origin. Identified alteration zones are classified into six principal types namely phyllic, phyllic/propylitic, propylitic, potassic, argillic and advanced argillic. The iron oxide minerals in the oxidized zone were also identified using spectral analysis. Results of spectral analyses of samples are consistent with mineralogical data obtained from X-ray diffraction (XRD) and petrographic studies. Spectroscopic studies by ASD demonstrate that this tool is very useful for semi-quantitative and cost effective identification of different types of alteration mineral assemblages. Furthermore, it can provide a valuable tool for evaluating aerial distribution of alteration minerals while coupled with remote sensing data analysis.  相似文献   

9.
The Haenam volcanic field was formed in the southern part of the Korean peninsula by the climactic igneous activity of the Late Cretaceous. The volcanic field hosts more than nine hydrothermal clay deposits and two epithermal Au–Ag deposits. This study focuses on the relationship between hydrothermal clay alteration and epithermal Au–Ag mineralization based on the geology, alteration mineralogy, geochronology, and mineralization characteristics.These clay and epithermal Au–Ag deposits are interpreted to have formed by the same hydrothermal event which produced two distinct types of mineral systems: 1) Au-dominant epithermal Au–Ag deposit and 2) clay-dominant hydrothermal clay deposit. The two types of mineral systems show a close genetic relationship as suggested by their temporal and spatial relationships. The Seongsan hydrothermal system progressively evolved from a low-intermediate sulfidation epithermal system with Au–Ag mineralization and phyllic alteration to an acid–sulfate high-sulfidation system with Au–Ag mineralization and/or barren advanced argillic/argillic alteration. The Seongsan system evolved during post volcanic hydrothermal activity for at least 10 Ma in the Campanian stage of the late Cretaceous.The Seongsan hydrothermal system shows the rare and unique occurrence of superimposed high to low (intermediate) sulfidation episodes, which persisted for about 10 Ma.  相似文献   

10.
The Rosia Poieni deposit is the largest porphyry copper deposit in the Apuseni Mountains, Romania. Hydrothermal alteration and mineralization are related to the Middle Miocene emplacement of a subvolcanic body, the Fundoaia microdiorite. Zonation of the alteration associated with the porphyry copper deposit is recognized from the deep and central part of the porphyritic intrusion towards shallower and outer portions. Four alteration types have been distinguished: potassic, phyllic, advanced argillic, and propylitic. Potassic alteration affects mainly the Fundoaia subvolcanic body. The andesitic host rocks are altered only in the immediate contact zone with the Fundoaia intrusion. Mg-biotite and K-feldspar are the main alteration minerals of the potassic assemblage, accompanied by ubiquitous quartz; chlorite, and anhydrite are also present. Magnetite, pyrite, chalcopyrite and minor bornite, are associated with this alteration. Phyllic alteration has overprinted the margin of the potassic zone, and formed peripheral to it. It is characterized by the replacement of almost all early minerals by abundant quartz, phengite, illite, variable amounts of illite-smectite mixed-layer minerals, minor smectite, and kaolinite. Pyrite is abundant and represents the main sulfide in this alteration zone. Advanced argillic alteration affects the upper part of the volcanic structure. The mineral assemblage comprises alunite, kaolinite, dickite, pyrophyllite, diaspore, aluminium-phosphate-sulphate minerals (woodhouseite-svanbergite series), zunyite, minamyite, pyrite, and enargite (luzonite). Alunite forms well-developed crystals. Veins with enargite (luzonite) and pyrite in a gangue of quartz, pyrophyllite and diaspore, are present within and around the subvolcanic intrusion. This alteration type is partially controlled by fractures. A zonal distribution of alteration minerals is observed from the centre of fractures outwards with: (1) vuggy quartz; (2) quartz + alunite; (3) quartz + kaolinite ± alunite and, in the deeper part of the argillic zone, quartz + pyrophyllite + diaspore; (4) illite + illite-smectite mixed-layer minerals ± kaolinite ± alunite, and e) chlorite + albite + epidote. Propylitic alteration is present distal to all other alteration types and consists of chlorite, epidote, albite, and carbonates. Mineral parageneses, mineral stability fields, and alteration mineral geothermometers indicate that the different alteration assemblages are the result of changes in both fluid composition and temperature of the system. The alteration minerals reflect cooling of the hydrothermal system from >400 °C (biotite), to 300–200 °C (chlorite and illite in veinlets) and to lower temperatures of kaolinite, illite-smectite mixed layers, and smectite crystallization. Hydrothermal alteration started with an extensive potassic zone in the central part of the system that passed laterally to the propylitic zone. It was followed by phyllic overprint of the early-altered rocks. Nearly barren advanced argillic alteration subsequently superimposed the upper levels of the porphyry copper alteration zones. The close spatial association between porphyry mineralization and advanced argillic alteration suggests that they are genetically part of the same magmatic-hydrothermal system that includes a porphyry intrusion at depth and an epithermal environment of the advanced argillic type near the surface.Editorial handling: B. Lehmann  相似文献   

11.
文章基于ASTER和Landsat-8OLI两种多光谱遥感数据,采用高光谱遥感技术混合调谐滤波(MTMF)、多光谱遥感技术相对吸收深度(RBD)、波段比值(BR)等方法提取了西藏多龙矿集区地堡那木岗斑岩型铜金矿床地表的蚀变矿物组合。其结果表明,基于ASTER数据的MTMF技术可将Al—OH矿物划分为白云母+高岭石/蒙脱石和地开石+蒙脱石+累托石两种组合,进一步可细分出斑岩型矿床多光谱遥感地表蚀变矿物组合并呈现出良好的分带特征:地堡那木岗铜金矿床自内而外依次为白云母+高岭石/蒙脱石→地开石+蒙脱石+累托石→Mg—OH类矿物组合,分别对应于前人野外调查所勘测到的的绢英岩化带+泥化带→泥化带→青磐岩化带,Fe3+矿物叠加于绢英岩化带、泥化带及其两带的叠合部位。所提取的多光谱遥感蚀变矿物组合分带特征对该区斑岩型铜金矿床的勘查工作提供了重要的遥感线索,对定位找矿靶区具有指导意义。  相似文献   

12.
El Atshan mining area, central Eastern Desert, represents one of the uranium occurrences related to alkaline volcanic rocks in Egypt. Based on the plot of total alkali elements versus silica, these rocks are classified as trachytes. The U and Eu anomalies appear to be derived from trachyte exposed to a long period of alteration and rock–fluid interaction. The trachyte has been subjected to two phases of alteration. The pronounced chemical changes include the mobility of Si, Na, Fe, U, Zn and REE and the immobility of Mg, Th, Hf, Ta and Sc. The late stage hydrothermal solutions caused the breakdown of the feldspars by losing sodium, potassium and partially silica and eventually formation of argillic alteration products, dissolution of iron-bearing sulphides, formation of iron-oxy hydroxides and corrosion of primary uranium minerals forming uranyl oxide hydrates. The acidic water percolating through the fractured trachyte rock leached not only available major or trace elements, but also REE. Eu originally incorporated in feldspars as Eu+2 has been oxidized to Eu+3 and subsequently leached away leaving a negative anomaly in the host rock. The leached U and Eu were then transported most probably as carbonate complexes. The second phase of alteration occurred at the near surface profile when the late stage hydrothermal fluids cool to the temperature of meteoric water and may have mixed with it, the pH of the fluids would shift to more alkaline values and at these conditions U and Eu were precipitated into the fracture system mainly by being adsorbed on the clay minerals and probably coprecipitated with iron oxy-hydroxides.  相似文献   

13.
岗岔—克莫金矿区位于西秦岭北缘夏河—合作成矿带,具浅成低温热液型矿床特征,初步显示深部可能具有斑岩成矿系统存在。利用短波红外光谱矿物分析技术对岗岔—克莫金矿区蚀变岩特征的研究表明,矿区内发育的蚀变矿物主要有白云母、伊利石、蒙脱石、高岭石、地开石、绿泥石、绿帘石和次生石英等。近矿蚀变类型主要为绢英岩化。矿区内以下家门沟口为中心向外依次发育了中心带(绢英岩化带)、过渡带(泥化带)和外围带(青磐岩化带)。此外,伊利石结晶度以下家门沟口为中心向外具有明显的降低趋势。研究结果指示下家门沟口可能是矿区的热液活动中心。  相似文献   

14.
The Daraloo field is located in the southeast of Iran (Kerman province). It is associated with Oligomiocene diorite/granodiorite to quartz monzonite stocks. Copper mineralization is basically relevant to potassic and phyllic alteration zones. Petrographic and geologic studies imply that mineralization is restricted to two major parts locating in the center and east of district. The larger central mineralization has a northwest–southeast trend perpendicular to the smaller one. Hydrothermal ore fluid formation occurred in relatively deep levels thereafter faulting and fracturing provided appropriate conduits to ascend fluids through shallower depths. Early hydrothermal alteration produced a confined potassic assemblage in the central and eastern parts of the stock. Two main fluid inclusion groups in relationship with alteration ore fluids have been identified. They are liquid-rich inclusions containing solid phases, with high temperatures (257°C to 554°C) and high salinities (31 to 67 wt.% NaCl equiv.), and vapor-rich inclusions with high temperatures and low salinities without any solid phases. These magmatic source fluids are responsible for boiling and also potassic and phyllic alteration zone. They also resulted in the formation of quartz groups I and II veins and chalcopyrite deposition. Propylitic alteration is attributed to a Ca-rich meteoric fluid. Inclusions originated from this fluid are liquid-rich having low temperatures (161°C to 269°C) and low salinities (1 to 13 wt.% NaCl). Mixing descending meteoric water with magmatic fluids reduces considerably the salinity of magmatic fluid. Mixing is also the impetus of leaching copper from potassic to the phyllic zone. It is possible to conclude that all these procedures are controlled by the main faults of district having NW–SE trend. Two fundamental events affecting the mineralization are cooling ore-bearing fluids and magnetite (±pyrite) emplacement. The latter one is formed in potassic and phyllic alteration zone in which copper-bearing fluids have interaction with magnetite minerals and so chalcopyrite minerals have been formed nearby magnetites. Temperature and pressure of hydrothermal fluid differentiation could be applied as a predictive tool to discriminate between barren and productive copper porphyry deposits. A simple comparison of temperature and pressure variations between Daraloo deposit and other copper porphyry deposits located in the same belt of Iran (Sahand-Bazman belt) illuminates that Daraloo system has high range of pressure implying deeper exsolution of hydrothermal fluid. On the other hand, economic mineralization has direct relationship with temperature range of orthomagmatic fluids so that if a deposit has a wide range of high temperature fluids, it could be inferred as a barren deposit. In conclusion, it could be inferred that Daraloo district can be categorized as a sub-economic porphyry deposit. On the other hand, restricted formation of chalcopyrite and the other copper-bearing minerals besides large amounts of magnetite and pyrite can approve obviously the low grade of mineralization in Daraloo district.  相似文献   

15.
排山楼地区变质作用的主要因素为热量(约600℃)、化学活动流体和压力(地压应力和挤压应力).地壳震动是造成本区造山作用的原因.这种现象与板块构造理论相吻合.矿物分异作用序列为:首先,受火成侵入活动的影响,产生片麻岩、糜棱岩、花岗岩;然后,经历地压和挤压的作用;最后,发生各种类型蚀变作用,包括绢云母化、硅化、碳酸岩化、方解石化、绿泥石化、脱氧作用等.排山楼金矿成矿模式可概述如下:a)成矿作用为热液蚀变型,矿床赋存在太古宙变质岩大型韧性剪切带中;b)矿体产于裂隙中;c)矿体形态与岩脉和细脉形态一致;d)围岩经历了强烈的蚀变作用;e)黄铁矿是最重要的富金矿物,热液流体来源于侵入体,在流经破碎带和裂隙带后,在围岩中沉积黄铁矿.主要岩石类型有花岗岩、角闪岩、片岩、片麻岩和糜棱岩.区内广泛发育青盘岩化、泥化和绢云母化蚀变作用.主要蚀变矿物有石英、黄铁矿、白云母、绢云母、绿帘石、黑云母、微斜长石、方解石、角闪石、云母和锆石.矿体主要赋存在花岗岩和片麻岩中.主要蚀变作用为绢云母化、黑云母化、硅化和方解石化.蚀变过程中,铁氧化物(铁帽、云母)覆于贫硫酸盐矿石表面.蚀变类型有青盘岩化(黏土)、泥化和绢云母化.通常,氧化铁与黏土矿物的混合影响卫星影像中光谱的反射.利用遥感技术方法,适于这类矿床的进一步预测研究.  相似文献   

16.
金厂金矿18号矿体围岩蚀变发育顺序从早到晚为:钾化、硅化、绿泥石化、绢云母化、碳酸盐化、高蛉土化,从内往外依次发育青磐岩化带、绢英岩化带和钾化带.矿化出现在泥化和绢英岩化叠加处,以及泥化和青磐岩化叠加处.通过短波红外光谱测试技术,识别出本矿区有26种蚀交矿物,其中白云母含量与金矿体呈正相关,说明绢云母化与金矿化关系密切;青磐岩化带蚀变矿物组合为绿泥石+绿帘石+伊利石±埃洛石±蒙脱石±石英;钾化带蚀变矿物组合为钾长石+高岭石+埃洛石±蒙脱石±石英;绢英岩化带蚀变矿物组合为绢云母+埃洛石±蒙脱石±高岭石±石英.  相似文献   

17.
The Cenozoic Urumieh–Dokhtar Magmatic Belt (UDMB) of Iran is a major host to porphyry Cu ± Mo ± Au deposits (PCDs). Most known PCDs in the UDMB occur in the southern section of the belt, also known as the Kerman Copper Belt (KCB). Three major clusters of PCDs are distinguished in the KCB and include the Miduk, Sarcheshmeh and Daraloo clusters. The Daraloo and Sarmeshk deposits occur in a northwest–southeast-trending fault zone that is characterized by the presence of a narrow zone of alteration–mineralization that contains a series of Oligocene granitoids and Miocene porphyritic tonalite–granodiorite plutons that cut Eocene andesitic lava flows and pyroclastic rocks. Here we use various techniques, including different ratio images, minimum noise fraction, pixel purity index, and matched filter processing to process ASTER data (14 bands) and generate maps that portray the distribution of hydrothermal minerals (e.g., sericite, kaolinite, chlorite, epidote and carbonate) related to PCD alteration zones. In order to validate the ASTER data, follow-up ground proofing and related mineralogical work was done which, in all cases, proved to be positive. The results of this work have identified the regional distribution of hypogene alteration zones (i.e., phyllic, argillic, propylitic and silicic), in addition to areas of secondary Fe-oxide formation, which are coincident with known sites of PCDs. The regional distribution and extent of the alteration zones identified also highlighted the role of regional structures in focusing the mineralizing/altering fluids. These results demonstrate very convincingly that ASTER imagery that uses the appropriate techniques is reliable and robust in mapping out the extent of hydrothermal alteration and lithological units, and can be used for targeting hydrothermal ore deposits, particularly porphyry copper deposits where the alteration footprint is sizeable.  相似文献   

18.
Miduk hypogene and supergene porphyry Cu–Mo mineralization occurs within the Miocene porphyritic quartz–diorite and host Eocene plagioclase–hornblende phyric andesitic pyroclastic and flow sequence. Both the host rocks were extensively altered by hydrothermal fluids to dominantly potassic, phyllic, and argillic with interstitial to distal propylitic types.  相似文献   

19.
The Um Ghannam area lies within the core of Hafafit Complex, South Eastern Desert. This area is occupied mainly by granitic gneiss (orthogneiss). However, the granitic gneiss is extruded by swarm metarhyolite dykes and quartz veins. The studied metarhyolite dyke is classified into two distinctive zones. However, the intense degree of hydrothermal alteration can partition this dyke into weakly and extremely altered zones. According to the extraordinary diversity in color, this dyke is distinguished into gray to dark gray (weakly altered) and greenish (extremely altered) metarhyolite. Petrographical, mineralogical, and geochemical characteristics of the two distinctive zones are detected in a representative sample. Petrographically, the weakly altered zone is mainly represented by chloritization of primary biotite, garnet, and epidote, and argillitization of primary plagioclase. Although the extremely altered zone contains intensely altered remnants of the original rock, the extremely altered zone is distinguished by intense oxidation products (carbonate minerals and quartz, with significant amounts of secondary Cr-muscovite and hematite). The mineralogical studies are imposed on the millimeter and the micrometer scale in this important hydrogeothermal system. Except for Ca and Mg, most of the major elements are depleted at the extremely altered zone. However, the extremely altered zone is enriched in trace elements (Cr, Mn, Co, and Ni). The major elements of the extremely altered zone reflect the significant alterations (desilication, muscovitization, and carbonatization). These alteration processes have taken place in the hydrogeothermal system in the extremely altered zone. The geothermal fluid is responsible for these hydrothermal alterations. High fO2 and high temperature are characteristic features of this fluid. Then, the high-field-strength elements such as Zr, Ti, and P are depleted as a significant hydrothermal alteration. Also, nuclear elements with the anion of (CO3)2? can travel as molecular complexes (carbonates), as long as the chemical and structural conditions are suitable for the movement of these elements from the metarhyolite dyke to redeposit and accumulate in another geologic formation. The rare earth elements La and Ce, as well as Yb and Lu, are partially mobilized during intensity alterations. The rare earth elements (REEs) are depleted in abundance with enrichment of CO2 from the weakly altered zone to the extremely altered zone. The REE budget is decreased from the weakly altered zone to the extremely altered zone as 121.17 to (27.38???16.52), respectively. The significant depletion of ∑REEs is controlled by dissolution of monazite. Monazite breakdown and even apatite formation can be caused by alkaline fluid. This fluid is related to event and thermal stage. However, the negative anomaly of Eu can be noticed in all studied samples. Then, Eu anomaly may be formed from plagioclase fractionation. The weakly altered metarhyolite zone and orthogneiss have lower HREE/LREE (0.07–0.11), respectively, relative to the extremely altered metarhyolite zone (0.17???0.2). Even all studied samples at two significant zones are characterized by the enrichment of ∑LREEs relative to ∑HREEs.  相似文献   

20.
贵州水银洞金矿构造蚀变体稀土元素地球化学特征   总被引：3，自引：0，他引：3  
水银洞金矿构造蚀变体(SBT)为产出于茅口租(P2m)和龙潭组(P3l)之间不整合面上的一套强硅化灰岩、灰岩角砾岩、硅化粘土岩组合.呆用ICP-MS测定钻孔岩芯中构造蚀变体样品稀土元素组成,对比研究SBT围岩、区域岩浆岩及现代海底热水系统流体稀土元素组成.结果显示,SBT的轻重稀土分馏明显[LREE/HREE=4.92～17.51,(La/Yb)N=5.94～38.37],曲线右倾型;轻稀土分异明显,曲线右倾程度大;重稀土分异不明显,曲线平坦;负Eu(0.61～0.94)、Ce(0.52～1.07)异常明显;SBT及围岩均具有明显W型稀土元素四分组效应,而不同于区域岩浆岩和现代海底热水系统流体,表明热液流体来源以壳源为主.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号