首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 937 毫秒
1.
大陆岩石圈在张裂和分离时的变形模式   总被引：4，自引：0，他引：4  
通过对南海南北共轭边缘地壳剖面的对比研究,发现大陆岩石圈的物理性质是分层的：上、中地壳呈脆性,下地壳表现出塑性,而岩石圈上地幔则仍呈脆性。因此,在它受张性应力场作用时,其变形和破裂分离方式也是分层进行的：上、中地壳能发生犁式断裂,产生的断块沿断面转动在地表产生一系列半地堑,并使地壳厚度减薄;如拉张应力继续作用时,上、中地壳将沿犁式断裂被拉开,从而形成上、下板块边缘,并彼此分开。下地壳则发生塑性变形,使地壳厚度减薄,并最终将其拉断。岩石圈上地幔亦可产生陡倾断裂,形成的断块沿断面转动亦使其厚度减薄,并最终沿陡倾断裂被拉断。这就是我们称之为岩石圈变形和破裂分 离时的分层变形及分层破裂分离模式。  相似文献   

2.
南海东北部陆缘构造演化信息丰富,对于理解南海的演化过程至关重要。本文收集了南海东北部的深反射地震和海底广角地震成果剖面,提取地壳和下地壳高速层的厚度结果,并结合水深、重磁异常和岩石圈的流变学等地质地球物理资料,对南海东北部的地壳减薄特征、吕宋-琉球转换板块边界的性质和下地壳高速层的分布及成因进行了分析和讨论。南海东北部的地壳减薄在横向和垂向上都存在不均匀性,以下地壳减薄为主,在台西南盆地存在极端减薄地壳;南海北缘的白云凹陷、西沙海槽和西缘的中建南盆地也存在类似的极端减薄地壳,且都与刚性地块共轭或邻近,推测刚性地块的存在导致地壳初始破裂时下地壳流动和地幔上隆是局部出现地壳极端减薄的主要原因。吕宋-琉球转换板块边界两侧在海底地形、新生代反射和重磁异常等方面均存在差异,与中生代岛弧引起的高磁异常大角度相交,其可能是中生代古特提斯构造域向太平洋构造域转换的边界断裂。下地壳高速层在南海东北部广泛发育,结合其分布特征和波速比Vp/Vs的分布区间,认为其是多期次岩浆底侵形成的铁镁质基性岩。  相似文献   

3.
对跨南海西南次海盆及两侧陆缘的一条1050km长的、包括海底地震(OBS)、长排列多道地震和重磁在内的综合地球物理探测剖面(CFT)进行了构造成像和研究。在多道地震成像基础上建立了CFT剖面初始速度模型, 进而通过初至波层析成像方法反演了CFT剖面的速度结构模型, 在重力异常资料的约束下建立了CFT剖面的综合地壳结构模型。讨论了沿CFT剖面出现的下地壳高速体、龙门海山的低密度物质等地质问题。结果表明, 下地壳高速层在北部陆坡、西南海盆和南部南沙地块均有分布, 厚度在0~4km之间, 可能与陆缘下地壳物质和地幔物质熔融混合, 以及深海盆海底扩张期间构造拉伸导致地幔蛇纹岩化有关。  相似文献   

4.
The South China Sea is the largest marginal basin of SE Asia, yet its mechanism of formation is still debated. A 1000-km long wide-angle refraction seismic profile was recently acquired along the conjugate margins of the SW sub-basin of the South China Sea, over the longest extended continental crust. A joint reflection and refraction seismic travel time inversion is performed to derive a 2-D velocity model of the crustal structure and upper mantle. Based on this new tomographic model, northern and southern margins are genetically linked since they share common structural characteristics. Most of the continental crust deforms in a brittle manner. Two scales of deformation are imaged and correlate well with seismic reflection observations. Small-scale normal faults (grabens, horsts and rotated faults blocks) are often associated with a tilt of the velocity isocontours affecting the upper crust. The mid-crust shows high lateral velocity variation defining low velocity bodies bounded by large-scale normal faults recognized in seismic reflection profiles. Major sedimentary basins are located above low velocity bodies interpreted as hanging-wall blocks. Along the northern margin, spacing between these velocity bodies decreases from 90 to 45 km as the total crust thins toward the Continent–Ocean Transition. The Continent–Ocean Transitions are narrow and slightly asymmetric – 60 km on the northern side and no more than 30 km on the southern side – indicating little space for significant hyper-stretched crust. Although we have no direct indication for mantle exhumation, shallow high velocities are observed at the Continent–Ocean Transition. The Moho interface remains rather flat over the extended domain, and remains undisturbed by the large-scale normal faults. The main décollement is thus within the ductile lower crust.  相似文献   

5.
TAIGER project deep-penetration seismic reflection profiles acquired in the northeastern South China Sea (SCS) provide a detailed view of the crustal structure of a very wide rifted continental margin. These profiles document a failed rift zone proximal to the shelf, a zone of thicker crust 150 km from the shelf, and gradually thinning crust toward the COB, spanning a total distance of 250–300 km. Such an expanse of extended continental crust is not unique but it is uncommon for continental margins. We use the high-quality images from this data set to identify the styles of upper and lower crustal structure and how they have thinned in response to extension and, in turn, what rheological variations are predicted that allow for protracted crustal extension. Upper crustal thinning is greatest at the failed rift (βuc ≈ 7.5) but is limited farther seaward (βuc ≈ 1–2). We interpret that the lower crust has discordantly thinned from an original 15–17 km to possibly less than 2–3 km thick beneath the central thick crust zone and more distal areas. This extreme lower crustal thinning indicates that it acted as a weak layer allowing decoupling between the upper crust and the mantle lithosphere. The observed upper crustal thickness variations and implied rheology (lower crustal flow) are consistent with large-scale boudinage of continental crust during protracted extension.  相似文献   

6.
As an interoceanic arc, the Kyushu-Palau Ridge（KPR） is an exceptional place to study the subduction process and related magmatism through its interior velocity structure. However, the crustal structure and its nature of the KPR,especially the southern part with limited seismic data, are still in mystery. In order to unveil the crustal structure of the southern part of the KPR, this study uses deep reflection/refraction seismic data recorded by 24 ocean bottom seismometers to reconstruct a detail...  相似文献   

7.
In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s−1 being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.  相似文献   

8.
The interpretation of 2D and 3D seismic reflection data complemented with gravity data allows the crustal architecture of the deepwater west Niger Delta passive margin to be defined. The data show that the area is underlain by oceanic crust that is characterised by a thickness of 5–7 km and by internal reflectivity consisting of both dipping and sub-horizontal reflectors. Some of the dipping reflections can be traced up to the top of the basement where they offset it across a series of minor to major thrust faults. Other internal reflections are attributed to extensional shear zones and possibly due to intrusions in the lower crust. The Moho can be correlated as a discrete reflection over >70% of the study area. It is generally smooth, but localised relief of up to 1 km is observed. The southeastern part of the study area is dominated by a zone of SW–NE striking basement thrusts.  相似文献   

9.
The Ulleung Basin (Tsushima Basin) in the southwestern East Sea (Japan Sea) is floored by a crust whose affinity is not known whether oceanic or thinned continental. This ambiguity resulted in unconstrained mechanisms of basin evolution. The present work attempts to define the nature of the crust of the Ulleung Basin and its tectonic evolution using seismic wide-angle reflection and refraction data recorded on ocean bottom seismometers (OBSs). Although the thickness of (10 km) of the crust is greater than typical oceanic crust, tau-p analysis of OBS data and forward modeling by 2-D ray tracing suggest that it is oceanic in character: (1) the crust consists of laterally consistent upper and lower layers that are typical of oceanic layers 2 and 3 in seismic velocity and gradient distribution and (2) layer 2C, the transition between layer 2 and layer 3 in oceanic crust, is manifested by a continuous velocity increase from 5.7 to 6.3 km/s over the thickness interval of about 1 km between the upper and lower layers. Therefore it is not likely that the Ulleung Basin was formed by the crustal extension of the southwestern Japan Arc where crustal structure is typically continental. Instead, the thickness of the crust and its velocity structure suggest that the Ulleung Basin was formed by seafloor spreading in a region of hotter than normal mantle surrounding a distant mantle plume, not directly above the core of the plume. It seems that the mantle plume was located in northeast China. This suggestion is consistent with geochemical data that indicate the influence of a mantle plume on the production of volcanic rocks in and around the Ulleung Basin. Thus we propose that the opening models of the southwestern East Sea should incorporate seafloor spreading and the influence of a mantle plume rather than the extension of the crust of the Japan Arc.  相似文献   

10.
A 700 km wide-angle reflection/refraction profile carried out in the central North Atlantic west of Ireland crossed the Erris Trough, Rockall Trough and Rockall Bank, and terminated in the western Hatton-Rockall Basin. The results reveal the presence of a number of sedimentary basins separated by basement highs. The Rockall Trough, with a sedimentary pile up to 5 km thick, is underlain by thinned continental crust 8–10 km thick. Some major fault block structures are identified, especially on the eastern margin of the Rockall Trough and in the adjacent Erris Trough. The Hatton-Rockall Basin is underlain by westward-thinning continental crust 22–10 km thick. Sedimentary strata are up to 5 km thick. The strata in the Rockall Trough and Hatton-Rockall Basin probably range in age from Late Palaeozoic to Cenozoic. However, the basins have different sedimentation histories and differ in structural style. The geometry of the crust and sediments suggests that the Rockall Trough originated by pure shear crustal stretching, associated with rift deposits and Cenozoic thermal sag strata. In contrast, the development of the Erris Trough, located on unthinned continental crust, was facilitated by shallow, brittle extension with little deep crustal attenuation. A two-layered crust occurs throughout the region. The lower crustal velocity in the Hatton-Rockall Basin is higher than that in the Rockall Trough. The velocity structure shows no indication of crustal underplating by upper mantle material in the region.  相似文献   

11.
A new high-resolution velocity model of the southern Kyushu-Palau Ridge(KPR) was derived from an activesource wide-angle seismic reflection/refraction profile. The result shows that the KPR crust can be divided into the upper crust with the P-wave velocity less than 6.1 m/s, and lower crust with P-wave velocity between 6.1 km/s and 7.2 km/s. The crustal thickness of the KPR reaches 12.0 km in the center, which gradually decreases to 5.0–6.0 km at sides. The velocity structure of the KPR is simil...  相似文献   

12.
McIntosh  K.  Akbar  F.  Calderon  C.  Stoffa  P.  Operto  S.  Christeson  G.  Nakamura  Y.  Shipley  T.  Flueh  E.  Stavenhagen  A.  Leandro  G. 《Marine Geophysical Researches》2000,21(5):451-474
In March and April 1995 a cooperative German, Costa Rican, and United States research team recorded onshore-offshore seismic data sets along the Pacific margin of Costa Rica using the R/V Ewing. Off the Nicoya Peninsula we used a linear array of ocean bottom seismometers and hydrophones (OBS/H) with onshore seismometers extending across much of the isthmus. In the central area we deployed an OBS/H areal array consisting of 30 instruments over a 9 km by 35-km area and had land stations on the Nicoya Peninsula adjacent to this marine array and also extending northeast on the main Costa Rican landmass. Our goal in these experiments was to determine the crustal velocity structure along different portions of this convergent margin and to use the dense instrument deployments to create migrated reflection images of the plate boundary zone and the subducting Cocos Plate. Our specific goal in the central area was to determine whether a subducted seamount is present at the location of the 1990, M 7 earthquake off the Nicoya Peninsula and can thus be linked to its nucleation. Subsequently we have processed the data to improve reflection signals, used the data to calculate crustal velocity models, and developed several wide-aperture migration techniques, based on a Kirchhoff algorithm, to produce reflection images. Along the northern transect we used the ocean bottom data to construct a detailed crustal velocity model, but reflections from the plate boundary and top and bottom of the subducting Cocos plate are difficult to identify and have so far produced poor images. In contrast, the land stations along this same transect recorded clear reflections from the top of the subducting plate or plate boundary, within the seismogenic zone, and we have constructed a clear image from this reflector beneath the Nicoya shelf. Data from the 3-D seismic experiment suffer from high-amplitude, coherent noise (arrivals other than reflections), and we have tried many techniques to enhance the signal to noise ratio of reflected arrivals. Due to the noise, an apparent lack of strong reflections from the plate boundary zone, and probable structural complexity, the resulting 3-D images only poorly resolve the top of the subducting Cocos Plate. The images are not able to provide compelling evidence of whether there is a subducting seamount at the 1990 earthquake hypocenter. Our results do show that OBS surveys are capable of creating images of the plate boundary zone and the subducting plate well into the seismogenic zone if coherent reflections are recorded at 1.8 km instrument spacing (2-D) and 5 km inline by 1 km crossline spacing for 3-D acquisition. However, due to typical high amplitude coherent noise, imaging results may be poorer than expected, especially in unfavorable geologic settings such as our 3-D survey area. More effective noise reduction in acquisition, possibly with the use of vertical hydrophone arrays, and in processing, with advanced multiple removal and possibly depth filtering, is required to achieve the desired detailed images of the seismogenic plate boundary zone.  相似文献   

13.
During summer of 2009, multi-channel marine seismic reflection data and wide-angle refraction data were acquired as part of the joint NSF and Taiwanese-funded TAIGER program with the goal of understanding the dynamics of arc-continent collision in Taiwan. One of the principle difficulties of crustal-scale imaging with marine reflection data such as these is the prevalent multiple contamination that obscures many of the deep crustal targets. Without effective treatment of multiples, many of the objectives of the TAIGER active source program may not be achieved. We present three profiles, one from each acquisition leg, that demonstrate the effectiveness of 2D surface-related multiple elimination (SRME) and radon filtering in attenuating much of this unwanted energy in broad ranges of water depths, seafloor topographies and lithologies. Two profiles from south of Taiwan image 3–4 km of sedimentary strata overlying moderately extended continental crust along the Eurasia continental shelf and a 5–6 km thick sedimentary section overlying thin crust consisting of faulted blocks and volcanic bodies along the continental slope. Our multiple attenuation efforts also reveal a seaward-dipping normal fault that penetrates into the upper mantle and separates thick crust of the continental shelf from thin crust of the continental slope. A profile from east of Taiwan reveals thin ocean crust of the Philippine Sea plate subducting beneath the Ryukyu trench that may be traced beneath the accretionary prism and Ryukyu forearc. These profiles demonstrate the success of our imaging strategy in the range of imaging environments spanned by the TAIGER marine reflection seismic data.  相似文献   

14.
A review is presented of current interpretation techniques in marine refraction seismology with particular emphasis on those features which are most useful in structural studies using ocean bottom seismometers. Travel time analysis techniques are discussed for both refraction and variable angle reflection profiles and are compared with systematic travel time inversion methods. Amplitude and waveform analysis techniques allow a more detailed velocity depth profile to be determined, and are illustrated for both surface and bottom receivers. The study of anisotropy and lateral variations in crustal structure may be usefully combined using delay time function methods but a detailed structural model also requires velocity-depth information. Signal processing techniques which are particularly useful for shear wave and long range propagation studies are also metioned. Structural studies using OBS' should lead to detailed knowledge of the oceanic crust and the P wave velocity distribution in the upper mantle.  相似文献   

15.
Interpretation of deep seismic reflection data across the Gascoyne Margin reveals six distinct seismic facies units related to the tectono-magmatic breakup history. On the outer Exmouth Plateau four large scale units are identified: (1) an extensively block-faulted upper crust; (2) a middle-crustal unit of discontinuous, undulatory reflectors; (3) a reflection-free deep crustal unit; and (4) a lower-crustal band of low-frequency, high-amplitude reflectors. Two additional units are found near the continent-ocean boundary (COB); (5) seaward-dipping reflectors (SDR); and (6) landward-dipping reflectors in the lower crust below the SDR. The lower-crustal high-reflectivity band, located near the top of a high-velocity unit (Vp > 7 kms–1), is interpreted as magmatic underplating. There is a spatial correlation between the underplated area and the presence of extensive upper-crustal block-faulting and intrusive rocks in the shallow crust. The undulatory middle-crustal reflector unit is also only identified in the outer plateau area, and is interpreted as a zone in which the upper-crustal faults terminate. The inner parts of the margin consist of a deep basin showing little upper-crustal faulting and no evidence of middle crustal deformation or underplating. Theoretical modeling of the effect of rifting and magmatic underplating on crustal strength profiles suggests that the brittle-ductile transition may migrate at least 5 km upwards during several million years after the underplating event. Based on the seismic interpretation and crustal strength modeling we propose that the seismic structure of the outer Exmouth Plateau is severely modified by a transient change in the crustal rheological structure associated with magmatic underplating.  相似文献   

16.
南海北部地球物理特征及地壳结构   总被引：2，自引：0，他引：2  
为了研究南海地壳结构，中国和日本合作在南海北部首次进行了以炸药为震源的综合地球物理调查。经初步分析其地壳结构主要特征为：南海北部地壳分为沉积层、上地壳层、中地壳层及下地壳层。大陆架及上陆坡地壳厚度大、稳定。下陆坡地壳厚度除中地壳外，其他壳层厚度减薄且不稳定。深海盆地壳分３层，厚度虽薄但相对稳定，其底部缺失７．３ｋｍ·ｓ－１的高速层。测区内地壳总厚度：陆壳２６—３０ｋｍ，过渡壳１３—２２ｋｍ，洋壳为８ｋｍ。  相似文献   

17.
A combined ocean bottom seismometer, multichannel seismic reflection and gravity study has been carried out along the spreading direction of the Knipovich Ridge over a topographic high that defines a segment center. The youngest parts of the crust in the immediate vicinity of the ridge reveal fractured Oceanic Layer 2 and thermally expanded and possibly serpentinized Oceanic Layer 3. The mature part of the crust has normal thickness and seismic velocities with no significant crustal thickness and seismic velocity variations. Mature Oceanic Layer 2 is in addition broken into several rotated fault blocks. Comparison with a profile acquired ~40 km north of the segment center reveals significant differences. Along this profile, reported earlier, periods of slower spreading led to generation of thin crust with a high P-wave velocity (Vp), composed of a mixture of gabbro and serpentinized mantle, while periods of faster spreading led to generation of more normal gabbroic crust. For the profile across the segment center no clear relation exists between spreading rate and crustal thickness and seismic velocity. In this study we have found that higher magmatism may lead to generation of oceanic crust with normal thickness even at ultra-slow spreading rates.  相似文献   

18.
The sedimentary structure in the Gulf of Cadiz has been extensively studied by oil exploration companies. However, up to now little is known about its deep crustal structure. Moreover, the total thickness of the sedimentary layers remains unknown in large areas. The purpose of this paper is the crustal-scale interpretation of deep seismic near-vertical reflection and refraction/wide-angle reflection data obtained during the IAM (Iberian Atlantic Margins) project, carried out in 1993. Our results indicate that a continental type crust is underlying the entire Gulf of Cadiz, with progressive thinning from east to west. The sedimentary cover shows a great thickness, reaching 8 km in the center of the Gulf. Three main sedimentary units can be recognized: Jurassic-Cretaceous calcareous rocks, continuation of Algarve outcrops; the Allochthonous Units of Guadalquivir/Gulf of Cadiz, the offshore continuation of the inland Carmona nappe; and sub-horizontal post-Miocene marine sediments. The crystalline crust is divided into three main layers: the upper crust is characterized by P-wave velocity values of 5.7–6.1 km/s; the middle crust shows values of 6.3–6.4 km/s; the lower crust has a mean vertical velocity gradient of 0.02 km/s/km, with velocities between 6.9 to 7.1 km/s. The total crustal thickness varies from 27 km for the eastern part of the studied area, to 20 km for the westernmost part. The crustal thinning is more pronounced in a N-S direction than in an E-W direction. No major structures related with a defined Iberia-Africa plate boundary could be found. This revised version was published online in November 2006 with corrections to the Cover Date.  相似文献   

19.
Bathmetric highs on the old crust proximal to ridge-transform intersections (RTIs), termed intersection highs, are common but poorly understood features at offsets of fast to intermediate rate spreading centers. We have combined new reflection seismic, photographic, and geochemical data with previously published Seabeam, SeaMARC I, and SeaMARC II data to address the nature of the intersection highs at the Clipperton Fracture Zone. The Clipperton Intersection Highs are both topped by a carapace of young lavas at least 100 m thick. These lavas, which were erupted on the intersection highs, are chemically similar to their adjacent ridge segments and different from the surrounding older crust. At least some of the erupted magma traveled directly from the adjacent ridge at a shallow crustal level. Ridge-related magma covers and intrudes at least the upper 500 m of the transform tectonized crust at the RTI. We suspect that additional magma enters the intersection highs from directly below, without passing through the ridge. The young oceanic crust near the western Clipperton RTI is not thin by regional comparison. The 1.4 m.y. old crust near the eastern Clipperton RTI thickens approaching the transform offset. If the thermal effects of the proximal ridge were negligible, the eastern intersection high crust would appear to be in isostatic equilibrium. We believe that thermal effects are significant, and that the intersection high region stands anomalously shallow for its crustal thickness. This is attributable to increased temperature in the mantle below the ridge-proximal crust. Although ridge magma is injected into the proximal old crust, plate boundary reorganization is not taking place. Intersection high formation has been an ongoing process at both of the Clipperton RTIs for at least the past 1 m.y., during which time the plate boundary configuration has not changed appreciably. We envision a constant interplay between the intruding ridge magma and the disrupting transform fault motion. In addition, we envision a nearly constant input of magma from below the high, as an extension of the magma supply to the ridge from the mantle. Because the proximal ridge profoundly affects the juxtaposed crust at the RTI, sea floor fabric along the aseismic extensions of this fast-slipping transform fault is primarily a record of processes at work at the RTI rather than a record of transform tectonism.  相似文献   

20.
We interpret seven two-dimensional deep-penetration and long-offset multi-channel seismic profiles in the northernmost South China Sea area, which were collected by R/V Marcus G. Langseth during the TAIwan GEodynamics Research (TAIGER) project in 2009. To constrain the crustal characteristics, magnetic inversion and forward magnetic modeling were also performed. The seismic results clearly show tilted faulting blocks in the upper crust and most of the fault plane connects downward to a quasi-horizontal detachment as its bottom in the south of the Luzon-Ryukyu transform plate boundary. North of the plate boundary, a small-scale failed rifted basin (minimum 5 km in crustal thickness) with negative magnetization probably indicates an extended continental origin. Significant lower crustal material (LCM) was imaged under a crustal fracture area which indicated a continent and ocean transition origin. The thickest LCM (up to 6.5 km) is located at magnetic isochron C15 that is probably caused by the magma supply composite of a Miocene syn-rift volcanic event and Pliocene Dongsha volcanic activity for submarine volcanoes and sills in the surrounding area. The LCM also caused Miocene crustal blocks to be uplifted reversely as 17 km crustal thickness especially in the area of magnetic isochron C15 and C16. In addition, the wide fault blocks and LCM co-existed on the magnetic striped area (i.e. C15–C17) in the south of the Luzon-Ryukyu transform plate boundary. Magnetic forward modeling suggests that the whole thick crustal thickness (>12 km thick) needs to be magnetized in striped way as oceanic crust. However, the result also shows that the misfit between observed and synthetic magnetic anomaly is about 40 nT, north of isochron C16. The interval velocity derived from pre-stack time migration suggests that the crust is composed of basaltic intrusive upper crust and lower crustal material. The crustal nature should refer to a transition between continent and ocean. Thus, the magnetic reversals may be produced in two possible ways: basaltic magma injected along the crustal weak zone across magnetic reversal epoch and because some undiscovered ancient piece of oceanic crust existed. The crustal structure discrimination still needs to be confirmed by future studies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号