共查询到20条相似文献，搜索用时 62 毫秒
1.
2.
基于目前国内海洋仪器的现状,为了对国产温盐深剖面仪(Conductivity-Temperature-Depth profiler,CTD)的性能和实际使用情况有个量化的结果,在我国南海东北部海域对国内较为成熟且具备产品化条件的两型国产CTD开展第三方独立检验与验证。比测过程中,采用同架捆绑,同步下放的方法进行测量。数据处理时,采用一种简便的移相相关法,对国产CTD的压力(P)、温度(T)、电导率(C)、盐度(S)与标准CTD进行对比分析。试验结果表明两者数据曲线趋势一致,线形基本吻合,参试的国产CTD基本上达到自身产品标称精度,但低于标准CTD精度。本次比测结果有利于促进技术成果的完善与固化,有利于进一步提高设备的可靠性、稳定性和批量一致性,为国产海洋环境监测设备的规模化应用和推广提供数据支撑。 相似文献
3.
《海洋技术学报》2021,40(2)
海水声速剖面的准确获取对于利用多波束声呐系统进行水深测量至关重要,而传统的声速剖面获取方式都需要停船进行测量,导致海上调查作业效率较低。为了解决该问题,本文首先介绍了温盐深剖面测量仪(CTD)和抛弃式温盐深剖面测量仪(XCTD)间接测量声速剖面的原理,然后对"海洋地质六号"调查船在同一站位及时间利用CTD、XCTD和AML PLUS SV声速剖面仪测量得到的声速剖面进行了一个对比分析。研究结果表明,三者测量得到的声速剖面在相同水深处声速互差引起的水深差值最大为0.130 9 m。在多波束水深测量过程中,可考虑使用CTD和XCTD间接测量获得的声速剖面代替声速剖面仪直接测得的声速剖面,通过合理布设CTD站位以及使用XCTD来提高海上多波束水深调查的作业效率。 相似文献
4.
CTD是测量海水温度、电导率和压力的仪器,在海洋科学考察、海洋资源调查开发、海洋环境监测预报和海洋军事研究中应用广泛。SZC15-4型多参数CTD是国产SZC15系列CTD最新型号,用于测量海水的温度、电导率、深度和叶绿素浓度,适用于近岸海洋调查。文中介绍了SZC15-4型多参数CTD剖面仪的性能、工作原理、系统组成和工作流程。并通过海上试验,与SBE19CTD在相同环境条件、相同采样速率下作比测,通过对实验数据做相关运算得出SZC15-4型CTD与SBE19在温度、盐度相关性优于0.999 9,表明两种仪器具有很高的相关特性。 相似文献
5.
在深远海海域开展多波束水深测量时,受海上苛刻作业条件等多种影响,获取全深度声速剖面往往比较困难。首先联合WOA2018温盐模型和多个站位CTD、XCTD实测温盐剖面资料开展了全深度声速剖面重构,进而使用三组来源不同的全深度声速剖面开展了多波束测深声速改正对比分析。从试验结果看,这几组声速剖面对多波束测深精度的影响基本一致。特别是当假定CTD站位采用XCTD设备并由此推算深度大于1099m的温盐及声速剖面时,多波束测深的声速改正结果也能满足海底地形成果的质量要求。 相似文献
6.
随着国产投弃式温深仪(XBT)性能的提高,其使用范围和规模也逐步扩大,受某专项办的委托,厦门大学在南海东北部开展了"海洋监测设备适用性检验规范及海上试验研究(国家863计划)"项目,针对海洋技术领域研发的技术较为成熟、具备产品化条件的XBT开展检验与验证,对国产XBT的性能和实际使用情况进行分析和总结。试验中,在不同站点进行温盐深仪(CTD)现场测量,以此数据为真值对国产和进口XBT精度做评估。在较高速度走航测量时,则以进口XBT数据为参照,对国产XBT进行评估。试验结果表明,国产XBT整体上表现良好,成功率大概为80%,有些型号的国产XBT精度与进口XBT精度接近,但国产XBT无效剖面较多。同时也发现,进口XBT的精度无法满足预期比测的要求,不能准确计算出国产XBT精度,但结果仍然具有参考价值。本次试验可以为国产XBT的规模化应用和推广提供数据支持,也可为其他型号XBT/XCTD/CTD等仪器的比测提供借鉴。 相似文献
7.
针对平台和试验条件对声学多普勒流速剖面测量仪（Acoustic Doppler Current Profiler,ADCP）海上比测试验的影响,本文开展了基于坐底平台和浮平台的ADCP海上比测试验。本文统计了不同测量时间段、不同剖面深度比测ADCP所测流速、流向数据的相关系数和均方根误差,完成了基于坐底平台、浮平台开展ADCP海上比测试验总体效果分析,并研究分析了采样时间、海况等试验条件对浮平台试验结果的影响。研究结果表明：浮平台相较于坐底平台更适合开展ADCP海上比测试验,采样时间段不同、海况等级不同都会影响海上比测试验结果。本文研究成果可为进一步优化海上比测试验结果提供方向,为规范国产ADCP的检验验证手段提供理论基础和实践依据。 相似文献
8.
船载拖曳式多参数剖面测量系统是测量温度、深度、浊度、溶解氧、p H和叶绿素等多种海洋环境要素,提供海洋环境信息的重要观测设备。通过对2011年8月在渤海开展的CZT1-2型船载拖曳式多参数剖面测量系统比测试验,研究了该国产设备在渤海海区的适用效果。结果表明,传感器定点比测试验中,温度、盐度等数据的相关系数较好,而硝酸盐、磷酸盐、亚硝酸盐、硅酸盐和氨氮等营养盐的相对误差较大。在海试试验中,船载拖曳式多参数剖面测量系统经过了8 h试验,完成了预期的试验项目,拖体系统(含传感器)和甲板单元工作正常,具有良好的可靠性和环境适应性。本次海上比测试验为船载拖曳式多参数剖面测量系统进行改善、优化提供依据,为其产业化打下坚实的基础,并对海上试验提出了相应的改进建议。 相似文献
9.
海洋科学的发展离不开精确的数据,然而各种海洋观测仪器在复杂的海洋环境中作业难免产生测量误差,导致观测数据需要进行实时(或延时)质量控制。中国Argo计划在搭载多个航次布放剖面浮标的同时,对航次中获取的船载CTD(conductivity, temperature, and depth)仪观测资料、自动剖面浮标观测资料以及实验室高精度盐度计测量数据进行了实时比对。分析结果显示,利用实验室高精度盐度计对现场观测数据尤其是船载CTD仪观测资料进行质量控制,于温盐数据(特别是深层)的实时/延时校正非常重要;如某航次未经标定的船载CTD仪所测1000dbar以深范围内海水盐度,与实验室高精度盐度计的差值达到±0.1左右,远远落后于国内海洋调查规范对盐度准确度±0.02的一级测量要求,该具体实例更加突显了船载CTD仪在航次前后送往权威部门进行检测的必要性和重要性,从而确保每个航次获取的CTD资料的质量。建议有条件的情况下,在进行深海大洋船载CTD仪观测时要进行现场实验室高精度盐度计的质量控制工作及比对试验,以提高我国深海大洋观测数据的质量。 相似文献
10.
针对国产走航式声学海流剖面仪的应用性能进行评价,为用户及生产厂家提供借鉴。首先,就国产走航式声学海流剖面仪的实际数据,从不同角度和层面,全面分析和考察了其测量数据的各项性能,有针对性地绘制了各类图件,并通过数据质量、数据有效性、测流精度、测流深度等各方面的分析比对,对国产走航式声学海流剖面仪做出定性评价。其次,通过与国外同类仪器的以往应用情况进行对比分析,发现在船只转向和往复航行、加速和减速航行、高速航行时,国产走航式声学海流剖面仪表现更佳。最后,基于应用中的不足给出相关建议。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
16.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
20.