共查询到20条相似文献，搜索用时 125 毫秒
1.
使用位于松辽盆地内部的NECESSArray台阵连续两年背景噪声数据,通过波形互相关和多重滤波方法提取到2~14 s较短周期的Rayleigh波群速度和相速度频散曲线,基于快速行进（FMM）面波成像方法得到群速度和相速度成像结果,并采用最小二乘迭代线性方法反演获得了松辽盆地深至12 km的三维S波速度结构.本文成像结果显示：松辽盆地内部S波速度分布的横向不均匀性与该区域的构造单元呈现出良好的空间对应关系.从地表至下方的6 km深度,盆地北部比南部表现出更加强烈的低速异常,这一特征可能与盆地南北的沉积构造差异有关.中央坳陷区低速异常的边界与嫩江断裂走向相互平行,表明盆地基底断裂对盆地形成演化具有一定的控制作用.在垂直速度结构剖面中,2.9 km·s-1的S波速度等值线与地震反射剖面显示的盆地基底深度大致对应.基于S波速度模型和盆地基底速度（2.9 km·s-1）,我们获得精细的松辽盆地沉积层厚度模型,结果表明松辽盆地的沉积层厚度分布呈现出中间厚、四周薄的特征,中央坳陷区的沉积层厚度范围大约在3~6 km. 相似文献
2.
THE INVERSION OF S-WAVE VELOCITY STRUCTURE IN NINGXIA AND ITS ADJACENT AREA USING BACKGROUND NOISE IMAGING TECHNOLOGY 
下载免费PDF全文
下载免费PDF全文 In this paper, we use seismic waveform data of 90 seismic stations in Ningxia and its adjacent areas recorded between January 2012 and December 2013 to obtain the Rayleigh surface wave group velocity dispersion of the study area according to the noise imaging method and the 3-D S-wave velocity structure of the crust and upper mantle in Ningxia and its adjacent regions. The results show that within the depth range of 10~40km in Yinchuan graben and Liupanshan fault belt there exists a slow anomaly body, and with the increase of the depth this slow anomaly becomes an abnormal slow zone surrounding Lanzhou Basin between the massif arcuate structure of northeastern margin of Tibet Plateau and Alxa block. The 3-D S-wave velocity structure of the crust and upper mantle of the study area presents obvious lateral inhomogeneity. These results have important significance for the study of the dynamics of active tectonic zones and mechanism of strong earthquakes in Ningxia and its adjacent areas. 相似文献
3.
S波速度结构能够反映地球介质的物性差异,是地壳内低速区结构特征判别的重要依据.本文尝试利用空间自相关法(SPAC法)从地震台站微动信号的垂直分量中提取瑞利波相速度频散曲线,通过对频散曲线的反演获得地下介质的S波速度结构.以国家数字测震台网8个宽频带地震台站的实测微动数据为例,采用SPAC方法获得了首都圈地区北京附近约30 km 深度范围内的一维S波速度结构.结果表明,该区结晶基底埋深较浅约2 km;分别在5~8 km 和12~16 km 深处发育S波低速层;8 km 和 20 km 处是S波速度差异较大的速度分界面.这一结果与以往地震学及人工地震探测结果较为吻合,表明SPAC法估算地壳S波速度结构是可行、有效的. 相似文献
4.
The average layered structure of the intracratonic Paraná Basin, SE Brazil, is investigated with surface-wave group velocities
from a small regional earthquake recorded by two broadband stations. Rayleigh and Love waves in the period range 1–4.2 s are
used to infer average properties down to about 4 km. Genetic algorithm techniques are used to find the best fitting 1-D S-wave
model. The inverted 1-D models show fair correlation with the average properties of the propagation paths as expected from
geology and borehole information. However, different S-wave velocity models are obtained for the different inversion parameterizations.
Since lateral heterogeneities are expected along the paths, several synthetic tests are performed with heterogeneous propagation
paths. For approximately homogenous path (i.e., little lateral variation), the main features of the average synthetic model
can be retrieved for different model parameterizations. For strong lateral variations, however, the average dispersion curve
can produce very different 1-D inverted models depending on the parameterization. Also, the 1-D inverted models may differ
significantly from the average properties of the inhomogeneous path, and wrong depths to interfaces may be inferred. For real
data inversions, it is then suggested that various different parameterizations should be tested. If the resulting models show
consistent features, this probably indicates homogeneity in the propagation path. But, if very different and unstable features
are obtained in the 1-D inversions, then strong lateral variation may be present in the propagation path, and the average
1-D model may not represent average properties along the path. 相似文献
5.
6.
中国东北地区是中国唯一的深震孕育区,获取该区的壳幔结构,对于研究板块俯冲、深震以及火山活动等有重要的科学意义.本文利用该区159个固定台站2011年1月至2012年6月和27个流动台站2011年1月至2011年6月间的垂向波形连续记录,计算了台站间的预估格林函数,并采用基于连续小波变换的时频分析方法,测量了双台路径上瑞雷波的群速度和相速度频散曲线.通过质量控制和筛选,最终得到了2204条路径上周期5~40 s的群/相速度频散曲线.检测板测试表明,反演结果可以达到2°×2°的分辨.利用Ditmar & Yanovskaya反演方法,我们得到了研究区（105°E-135°E,39°N-52°N）周期8~30 s的瑞雷波的群速度和相速度分布图.不同周期的群/相速度分布图,反映了不同深度S波速度的横向变化情况.研究结果显示：中国东北地区的地壳上地幔S波速度结构存在横向非均匀性.短周期（如8 s）的群/相速度分布与地表地质构造具有明显的相关性,具体来说,山区显示为高速,沉积盆地显示为低速;随着周期的增大（如15 s,22 s）,地形的控制作用相对减弱;较长周期（如30 s）的群/相速度分布与地壳厚度密切相关. 相似文献
7.
Feasibility of waveform inversion of Rayleigh waves for shallow shear-wave velocity using a genetic algorithm 总被引：1，自引：0，他引：1
Chong Zeng Jianghai Xia Richard D. MillerGeorgios P. Tsoflias 《Journal of Applied Geophysics》2011,75(4):648-655
Conventional surface wave inversion for shallow shear (S)-wave velocity relies on the generation of dispersion curves of Rayleigh waves. This constrains the method to only laterally homogeneous (or very smooth laterally heterogeneous) earth models. Waveform inversion directly fits waveforms on seismograms, hence, does not have such a limitation. Waveforms of Rayleigh waves are highly related to S-wave velocities. By inverting the waveforms of Rayleigh waves on a near-surface seismogram, shallow S-wave velocities can be estimated for earth models with strong lateral heterogeneity. We employ genetic algorithm (GA) to perform waveform inversion of Rayleigh waves for S-wave velocities. The forward problem is solved by finite-difference modeling in the time domain. The model space is updated by generating offspring models using GA. Final solutions can be found through an iterative waveform-fitting scheme. Inversions based on synthetic records show that the S-wave velocities can be recovered successfully with errors no more than 10% for several typical near-surface earth models. For layered earth models, the proposed method can generate one-dimensional S-wave velocity profiles without the knowledge of initial models. For earth models containing lateral heterogeneity in which case conventional dispersion-curve-based inversion methods are challenging, it is feasible to produce high-resolution S-wave velocity sections by GA waveform inversion with appropriate priori information. The synthetic tests indicate that the GA waveform inversion of Rayleigh waves has the great potential for shallow S-wave velocity imaging with the existence of strong lateral heterogeneity. 相似文献
8.
Ambient seismic noise or microtremor observations used in spatial auto-correlation (SPAC) array methods consist of a wide frequency range of surface waves from the frequency of about 0.1 Hz to several tens of Hz. The wavelengths (and hence depth sensitivity of such surface waves) allow determination of the site S-wave velocity model from a depth of 1 or 2 m down to a maximum of several kilometres; it is a passive seismic method using only ambient noise as the energy source. Application usually uses a 2D seismic array with a small number of seismometers (generally between 2 and 15) to estimate the phase velocity dispersion curve and hence the S-wave velocity depth profile for the site. A large number of methods have been proposed and used to estimate the dispersion curve; SPAC is the one of the oldest and the most commonly used methods due to its versatility and minimal instrumentation requirements. We show that direct fitting of observed and model SPAC spectra generally gives a superior bandwidth of useable data than does the more common approach of inversion after the intermediate step of constructing an observed dispersion curve. Current case histories demonstrate the method with a range of array types including two-station arrays, L-shaped multi-station arrays, triangular and circular arrays. Array sizes from a few metres to several-km in diameter have been successfully deployed in sites ranging from downtown urban settings to rural and remote desert sites. A fundamental requirement of the method is the ability to average wave propagation over a range of azimuths; this can be achieved with either or both of the wave sources being widely distributed in azimuth, and the use of a 2D array sampling the wave field over a range of azimuths. Several variants of the method extend its applicability to under-sampled data from sparse arrays, the complexity of multiple-mode propagation of energy, and the problem of precise estimation where array geometry departs from an ideal regular array. We find that sparse nested triangular arrays are generally sufficient, and the use of high-density circular arrays is unlikely to be cost-effective in routine applications. We recommend that passive seismic arrays should be the method of first choice when characterizing average S-wave velocity to a depth of 30 m (Vs30) and deeper, with active seismic methods such as multichannel analysis of surface waves (MASW) being a complementary method for use if and when conditions so require. The use of computer inversion methodology allows estimation of not only the S-wave velocity profile but also parameter uncertainties in terms of layer thickness and velocity. The coupling of SPAC methods with horizontal/vertical particle motion spectral ratio analysis generally allows use of lower frequency data, with consequent resolution of deeper layers than is possible with SPAC alone. Considering its non-invasive methodology, logistical flexibility, simplicity, applicability, and stability, the SPAC method and its various modified extensions will play an increasingly important role in site effect evaluation. The paper summarizes the fundamental theory of the SPAC method, reviews recent developments, and offers recommendations for future blind studies. 相似文献
9.
THREE-DIMENSIONAL S-WAVE VELOCITY DISTRIBUTION BASED ON AMBIENT NOISE ANALYSIS IN EASTERN NORTH 下载免费PDF全文
下载免费PDF全文 We apply ambient noise tomography to continuous vertical component broadband seismic data between January 1, 2010 and December 31, 2011from the regional networks of 190 stations deployed by China Earthquake Administration in Hebei, Shanxi and Inner Mengolia. Ambient noise cross-correlations were performed to produce the Green's functions of each station-pair. Firstly, we used the multiple-filter analysis method to extract surface wave group and phase velocity dispersion curves from inter-station paths at periods from 7 to 40s. Then the study area was discretized into a 0.2°×0.2° grid to obtain the group and phase velocity distributions using O'ccam inversion method. After that, three dimensional (3-D) S-wave velocity structures from the surface down to 50km are inverted from group and phase velocities dispersion results. the results of S wave velocity distribution maps generally demonstrate good correlations with surface geological and tectonic features, and they also clearly revealed the lateral velocity variation in the crust. In the mid-upper crust, the basins are clearly resolved with low S wave velocity due to its thick sedimentary layer, and the Taihang and Yanshan uplifts show relative higher S wave velocity distribution. With the increase of depth (>30km), the S wave velocity distribution presents a contrary characteristic compared to that of the shallow layer, and the S wave velocity beneath the Taihang and Yanshan uplifts are much lower than basin areas, which is possibly correlated with the thickness of the crust. 3-D S wave velocity shows a low-velocity zone at~10~20km depth observed beneath the Tanshan-Hejian-Xintai-Cixian belt and Bohai Bay. the low-velocity zone at~20~30km depth beneath the Datong area may be associated with the thermal material in the crust-mantle. Our S wave velocity distribution maps clearly show that Taihang Mountains is not only the boundary of topography and tectonic zone, but also the transition zone of high and low S wave velocity. 相似文献
10.
Yinhe Luo Jianghai Xia Jiangping Liu Yixian Xu Qingsheng Liu 《Journal of Applied Geophysics》2008,64(3-4):115-124
Multichannel Analysis of Surface Waves utilizes a multichannel recording system to estimate near-surface shear (S)-wave velocities from high-frequency Rayleigh waves. A pseudo-2D S-wave velocity (vS) section is constructed by aligning 1D models at the midpoint of each receiver spread and using a spatial interpolation scheme. The horizontal resolution of the section is therefore most influenced by the receiver spread length and the source interval. The receiver spread length sets the theoretical lower limit and any vS structure with its lateral dimension smaller than this length will not be properly resolved in the final vS section. A source interval smaller than the spread length will not improve the horizontal resolution because spatial smearing has already been introduced by the receiver spread.In this paper, we first analyze the horizontal resolution of a pair of synthetic traces. Resolution analysis shows that (1) a pair of traces with a smaller receiver spacing achieves higher horizontal resolution of inverted S-wave velocities but results in a larger relative error; (2) the relative error of the phase velocity at a high frequency is smaller than at a low frequency; and (3) a relative error of the inverted S-wave velocity is affected by the signal-to-noise ratio of data. These results provide us with a guideline to balance the trade-off between receiver spacing (horizontal resolution) and accuracy of the inverted S-wave velocity. We then present a scheme to generate a pseudo-2D S-wave velocity section with high horizontal resolution using multichannel records by inverting high-frequency surface-wave dispersion curves calculated through cross-correlation combined with a phase-shift scanning method. This method chooses only a pair of consecutive traces within a shot gather to calculate a dispersion curve. We finally invert surface-wave dispersion curves of synthetic and real-world data. Inversion results of both synthetic and real-world data demonstrate that inverting high-frequency surface-wave dispersion curves – by a pair of traces through cross-correlation with phase-shift scanning method and with the damped least-square method and the singular-value decomposition technique – can feasibly achieve a reliable pseudo-2D S-wave velocity section with relatively high horizontal resolution. 相似文献
11.
Lihua Fang Jianping Wu Zhifeng Ding Weilai Wang Giuliano Francesco Panza 《地震科学（英文版）》2010,23(5):477-486
We collected continuous noise waveform data from January 2007 to February 2008 recorded by 190 broadband and 10 very broadband stations of the North China Seismic Array.The study region is divided into grid with interval 0.25°×0.25°,and group velocity distribution maps between 4 s and 30 s are obtained using ambient noise tomography method.The lateral resolution is estimated to be 20-50 km for most of the study area.We construct a 3-D S wave velocity model by inverting the pure path dispersion curve at each grid using a genetic algorithm with smoothing constraint.The crustal structure observed in the model includes sedimentary basins such as North China basin,Yanqing-Huailai basin and Datong basin.A well-defined low velocity zone is observed in the Beijing-Tianjin-Tangshan region in 22-30 km depth range,which may be related to the upwelling of hot mantle material.The high velocity zone near Datong,Shuozhou and Qingshuihe within the depth range of 1-23 km reveals stable characteristics of Ordos block.The Taihangshan front fault extends to 12 km depth at least. 相似文献
12.
利用青藏高原东北缘地区固定和流动地震台网2007年8月到2012年1月期间记录的远震波形,运用小波变换频时分析方法分别测定了1216和653条周期从15到140 s的台站间基阶Rayleigh相速度和群速度频散曲线.通过对上述频散进行反演,重构了青藏高原东北缘分辨率高达0.5°×0.5°的2-D相速度和群速度分布图.然后通过对所提取到的每个格网点Rayleigh波相速度和群速度频散进行联合反演,得到了研究区下方一维S波速度结构.最后通过线性插值,得到了青藏高原东北缘下方地壳上地幔三维S波结构.结果表明,印度板块向北俯冲已经达到班公-怒江缝合带附近;在柴达木盆地北部祁连山下面我们发现了亚洲板块,且其没有表现出明显的向南俯冲的迹象;在两大板块中间,我们观测到延伸到250 km深度的低速异常,该低速异常可能是地幔物质底辟上涌现象造成的. 相似文献
13.
Using short-period (1–18 s) surface wave data recorded by 23 stations of the Yunnan Digital Seismic Network of China we determined
phase velocities of the fundamental Rayleigh wave along 209 paths by the two-station narrowband filtering and cross-correlation
method, followed by an inversion for phase velocity distributions at various periods using the Ditmar-Yanovskaya method. We
then obtained a 3-D S-wave velocity structure of the middle and upper crust in the Yunnan region using the genetic algorithm.
The results show strong lateral variation of phase velocity in the region. The short-period phase velocity variation is closely
related to thickness variation of sedimentary layer in the shallow crust. Within the depth range of 26–30 km, the S-wave velocity
in the Sichuan-Yunnan rhombic block is lower than in the surrounding areas. Most large earthquakes of M > 6.0 in Yunnan occurred
in the transition zones between low and high velocities. 相似文献
14.
15.
2019年8月2日河北省唐山市路南区某矿井区发生ML2.4巷道塌陷,基于塌陷周边台站观测到的短周期瑞雷波,提取面波基阶群速度频散曲线,并利用迭代反演方法得到研究区域地下10 km深度范围内的一维剪切波速度结构,用于精定位分析。速度分析结果表明,研究区域浅表剪切波速度约为2.46 km/s;深度为2 km时,塌陷周边存在小范围的低速区,速度约为2.57 km/s;深度约为4 km时,剪切波速度达3.47 km/s;深度为5～9 km时,唐山东部沉积盆地内存在1个剪切波低速层。精定位分析结果表明,增加浅层速度模型有助于提高深度较小的地震定位精度;塌陷周边的低速区向下延伸近20 km,为地震多发区。 相似文献
16.
Rayleigh-wave phase velocities have been utilized to determine shear (S)-wave velocities in near-surface geophysics since early 1980s. One of the key steps is to calculate theoretical dispersion curves of an earth model. When the S-wave velocity of the surface layer is higher than some of the layers below, however, the Rayleigh-wave phase velocity in a high-frequency range calculated by existing algorithms approaches the lowest S-wave velocity among the layers above the half-space, rather than a value related to the S-wave velocity of the surface layer. According to our numerical modeling results based on wave equation, trends of the Rayleigh-wave dispersive energy approach about a 91% of the S-wave velocity of the surface layer at a high-frequency range when its wavelength is much shorter than the thickness of the surface layer, which cannot be fitted by a dispersion curve calculated by existing algorithms. We propose a method to calculate Rayleigh-wave phase velocities of models with a high-velocity surface layer by considering its penetration depth. We build a substituted model that only contains the layer with the lowest S-wave velocity among the layers above the half-space and the layers above it. We use the substituted model to replace the original model to calculate phase velocities when the Rayleigh-wave wavelength is not long enough to penetrate the lowest S-wave velocity layer. Several synthetic models are used to verify fitness between the dispersion curve calculated by our proposed method and the trend of the highest dispersive energy. Examples of inversion also demonstrate high accuracy of using our method as the forward calculation method during the inversions. 相似文献
17.
利用我国地震台站记录的瑞利波观测资料，通过适配滤波频时分析技术进行数据处理，获得了穿越我国东南及陆缘地区的瑞利波频散.使用随机反演理论取得了东南大陆及陆缘地带4°×4°网格的纯路径频散数据.在网格反演的基础上使用Harkrider的面波反演程序求得了该区剪切波的三维速度结构.结果表明：1.华南大陆Moho界面埋深为30-40km，并由西向东逐渐减薄，在陆缘与浅海地域为25-28km，具有明显的分区特征.2.上地幔低速层埋深为60-0km，变化幅度较大，这与深部断裂分布及深层过程有关，但NS向剖面上各界面的起伏变化均比EW向剖面平缓.3.东南陆缘是东亚大陆的海陆过渡带，在深部表现为Moho界面埋深和地壳平均速度降低的地带，地幔深部界面的起伏形态充分表明，深浅介质结构和物质耦合的不均匀性. 相似文献
18.
利用南海地区28个陆地地震台站和2个布设于太平岛和东沙岛的新增海岛地震台站2011—2016年间的连续地震背景噪声波形数据,使用互相关方法计算得到了台站间的互相关函数,并提取出Rayleigh面波群速度和相速度频散曲线.采用快速行进和子空间方法反演获得了南海及周边地区12～40s周期的Rayleigh面波群速度和相速度图像,并联合反演得到了研究区深至60km的三维S波速度结构.考虑到南海数千米厚海水层对于面波频散反演的严重影响,本文在反演模型中加入了水层,显著提高了反演结果的可靠性.成像结果表明:南海及周边地区地壳上地幔顶部S波速度结构存在显著的横向不均匀性,并与这一区域的主要构造单元具有较好的空间对应关系.在5～10km深度,莺歌海—宋红盆地区的低速异常特征可能与盆地较厚的沉积层有关.在5～15km深度,海域高速异常区与海盆空间位置具有高度一致性,推测与海盆区地壳厚度相对陆缘区明显偏薄有关.当深度从20km增加至30km,海盆区的高速特征扩展至了陆缘地区,反映了地壳厚度从海盆至陆缘逐渐增厚的趋势,与OBS(海底地震仪)深地震剖面给出的地壳精细结构结果一致.至35～60km深度,海盆的高速异常特征依然明显,且速度值随深度增加整体呈现上升的趋势,推测南海海盆区的岩石圈厚度应该大于60km. 相似文献
19.
云南地区地处青藏高原东南缘,一直是地球科学研究的热点地区.目前,一些热点问题,如云南地区是否存在中下地壳低速流及其空间分布,仍有一定的争议.通过建立云南地区精细的地壳上地幔速度与各向异性结构,可为深入认识上述问题提供重要信息.本文利用天然地震波形记录,采用双台法提取了12~60 s周期的Rayleigh和Love波相速度频散,并进一步反演获得了云南地区10~100 km的三维地壳上地幔SV和SH波速度及径向各向异性结构.结果表明：S波速度与径向各向异性结构在横向和垂向均存在显著变化.在20~30 km深度,存在两个低速条带,且条带内呈现出正径向各向异性（VSH>VSV）特征,暗示了中下地壳低速物质的水平向运动.在80~100 km深度,云南西南和东南部显示为低速异常和正径向各向异性特征,暗示了软流圈物质的水平流动.在云南北部的丽江、攀枝花和昭通地区,岩石圈地幔中则存在明显的负径向各向异性（VSH<VSV）,可能反映了地幔物质的上涌痕迹.历史强震多发生在地壳低速区域或高低速过渡带,且地震附近的径向各向异性为负或者较弱.一些地震震源下方存在低速层,地壳低速层可能会促进强震发生. 相似文献
20.
面波多道分析方法(MASW)通过分析高频瑞雷波确定浅地表剪切波速度.在过去的20年中,由于该方法具有非侵入性、无损、高效及价格低的特点,越来越受到浅地表地球物理和地质工程学界的重视,视为未来最有希望的技术之一.这篇综述论文将介绍中国地质大学(武汉)浅地表地球物理团队近年来在研究高频面波的传播理论和应用中取得的部分成果.非几何波是一种仅存在于浅地表介质,尤其是未固结的沉积物中的独特的地震波.它的存在对快速而准确地获得表层S波速度有一定价值.我们的研究表明非几何波是一种具有频散特性的泄漏波.泄漏波的存在可能导致将其误认为瑞雷波的基阶或高阶能量,从而造成模式误判.这种模式误判会导致错误的反演结果.我们通过求取高基阶分离后的瑞雷波格林函数证明虚震源法瑞雷波勘探的可行性.这个结果将极大地降低野外瑞雷波勘探成本.勒夫波多道分析方法(MALW)中未知参数比瑞雷波的少,这使得勒夫波的频散曲线比瑞雷波的简单.因此,勒夫波反演更稳定,非唯一性更低.勒夫波数据生成的能量图像通常比瑞雷波的清晰,并具有更高的分辨率,从而可以更容易地拾取精确的勒夫波的相速度.利用雅克比矩阵分析波长与探测深度的关系表明对相同波长的基阶模式而言,瑞雷波的探测深度是勒夫波的1.3~1.4倍;而两种波的相同波长的高阶模式波的探测深度相同.我们也尝试了时间域勒夫波反演.按照勒夫波分辨率将地球模型剖分成了不同尺寸的块体,利用反卷积消除了地震子波对勒夫波波形的影响,通过更新每个块体的S波速度来拟合勒夫波波形,从而获得地下S波速度模型.该方法不基于水平层状模型假设,适用于任意二维介质模型. 相似文献