共查询到19条相似文献，搜索用时 171 毫秒
1.
利用从现场取得的原状土样,通过室内动三轴试验对循环荷载作用下的变形、孔压和强度特性进行研究。试验研究主要考虑了周围固结压力、循环剪切应力比、荷载频率和循环次数等因素的影响。研究表明,在循环荷载作用下,孔隙水压力和轴向应变均是一个波动上升的过程。当循环应力比增大时,动孔隙水压力变化幅值显著增加,而残余孔压也较大。同时,孔隙水压力值也随着周围压力的增大而明显增大。当作用荷载频率比较大时,需要更多的循环次数才能达到小频率作用荷载能达到的孔隙水压力值。但是,随着循环荷载作用次数的增加,频率对孔隙水压力的影响有减小的趋势。 相似文献
2.
采用大型动三轴试验仪进行重塑高岭土试样的循环三轴试验,试样直径为300 mm,高度为600 mm。圆柱体试样中心放置了一块竖向排水板,在循环加载试验进行时和结束后都可进行径向排水。试验结果验证了径向排水可以有效地消散循环荷载引起的孔隙水压力。通过结合径向固结理论与不排水循环加载土体模型,提出了一个循环荷载作用下径向固结模型,用来描述在允许径向排水的情况下软黏土在循环荷载作用下的孔压累积特性。模型中考虑了应力历史和孔隙水压力消散对孔隙水压力生成的影响,并用大型循环三轴试验结果进行验证。研究发现,当施加较大循环荷载时,径向排水减缓了孔隙水压力累积到临界值的速率,因而土体在破坏前可以经历更多次的循环荷载;当施加中等循环荷载时,径向排水可有效阻止孔隙水压力增长至临界值。除此之外,还研究了加载间歇期对孔压累积特性的影响,结果显示3组循环加载结束后,累积孔隙水压力开始减小,表明之后更多的循环加载并不会引起孔隙水压力的累积增长。 相似文献
3.
4.
在波浪循环荷载作用下饱和软黏土地基出现孔隙水压力升高,并导致不排水强度弱化,严重影响防波堤的承载性能。考虑静偏应力影响,基于最大孔隙水压力发展模型和正常固结软黏土不排水强度公式,推导出软黏土不排水强度随循环荷载作用次数和应力水平变化的动态折减规律。结合软黏土不排水强度动态折减规律和M-C屈服准则,在有限元软件ABAQUS上实现软黏土不排水强度循环弱化分析的数值开发和动力运算过程。运用该动力有限元方法对天津港防波堤地基软黏土的动、静三轴试验进行数值模拟运算。结果表明,最大孔隙水压力发展曲线以及循环荷载作用后不排水强度的数值预测结果与动三轴试验结果吻合良好。另外,动力有限元方法（DFEM）能够表示土体强度在循环荷载作用下的具体弱化过程。 相似文献
5.
在波浪循环荷载作用下饱和软黏土地基出现孔隙水压力升高,并导致不排水强度弱化,严重影响防波堤的承载性能。考虑静偏应力影响,基于最大孔隙水压力发展模型和正常固结软黏土不排水强度公式,推导出软黏土不排水强度随循环荷载作用次数和应力水平变化的动态折减规律。结合软黏土不排水强度动态折减规律和M-C屈服准则,在有限元软件ABAQUS上实现软黏土不排水强度循环弱化分析的数值开发和动力运算过程。运用该动力有限元方法对天津港防波堤地基软黏土的动、静三轴试验进行数值模拟运算。结果表明,最大孔隙水压力发展曲线以及循环荷载作用后不排水强度的数值预测结果与动三轴试验结果吻合良好。另外,动力有限元方法(DFEM)能够表示土体强度在循环荷载作用下的具体弱化过程。 相似文献
6.
7.
饱和软粘土在不排水循环荷载作用下孔隙水压力模型的建立 总被引：3，自引：0，他引：3
通过应力控制式循环三轴试验,研究了饱和软粘土在不排水循环荷载作用下的性状。在考虑影响循环 特性因素的基础上,建立了一种适合上海地区饱和软粘土孔隙水压力的增长模型。 相似文献
8.
9.
本文对重力式平台地基在风暴期间由波浪荷载引起的循环位移和孔隙水压力发展以及在随后的孔隙水压力消散过程中产生的固结变形进行了计算,并针对计算方法的合理性展开了一些讨论。 相似文献
10.
盾构穿越饱和砂土地层中的运营地铁时,在地铁列车振动荷载的作用下开挖面前方土体中会产生超孔隙水压力,影响开挖面稳定,通过动三轴试验对不同类型砂土在地铁列车振动荷载的作用下的超孔隙水压力增长规律进行了研究。研究表明,随着地铁列车振动荷载振幅的增大,超孔隙水压力逐渐增大,当振幅不大于10 kPa时,超孔隙水压力的增加并不明显;开挖面支护力减小,会使振动荷载对超孔隙水压力的影响增强,而且这种影响对土体竖向应力卸荷比土体水平应力卸荷更为敏感;在饱和松散细砂地层中,地铁列车振动荷载对超孔隙水压力的影响最为显著;地铁列车振动荷载引起的开挖面超孔隙水压力绝对数值不大,但能使泥水盾构泥膜承受的压力差至少减小约33%。 相似文献
11.
基于各向同性弹塑性损伤和Prevost模型的基本理论,把弹塑性等向硬化、运动硬化和各向同性损伤结合起来,推导了循环荷载作用下不排水饱和软黏土的弹塑性动力损伤本构模型。由循环累积塑性偏应变建立损伤演化方程,以描述循环加载对软黏土结构的破坏作用,并通过对循环三轴试验的模拟验证了模型的有效性。结果表明,提出的模型能较好地描述饱和软黏土在循环荷载作用下的变形、孔压变化及模量损伤过程。 相似文献
12.
A simple critical-state-based double-yield-surface model for clay behavior under complex loading 总被引：9，自引：4，他引：5
The critical state concept has been widely used in soil mechanics. The purpose of this study is to apply this concept in the framework of multi-mechanism elastoplasticity. The developed model has two yield surfaces: one for shear sliding and one for compression. In this model, the location of the critical state line is explicitly considered and related to the actual material density to control the peak strength and the phase transformation characteristics. The stress reversal technique is incorporated into the model for describing clay behavior under complex loading including changes of stress direction. The determination of the model parameters is discussed; it requires only one drained or undrained triaxial test up to failure with an initial isotropic consolidation stage. The model is used to simulate drained and undrained tests under monotonic loading with different over-consolidation ratios on various remolded and natural clays, including true triaxial tests with different Lode’s angles. Drained and undrained tests under cyclic loadings are also simulated by using the set of parameters determined from monotonic tests. The comparison between experimental results and numerical simulations demonstrate a good predictive ability of this new simple model. 相似文献
13.
Modelling cyclic behaviour of granular soils under both drained and undrained conditions with a good performance is still a challenge. This study presents a new way of modelling the cyclic behaviour of granular materials using deep learning. To capture the continuous cyclic behaviour in time dimension, the long short-term memory (LSTM) neural network is adopted, which is characterised by the prediction of sequential data, meaning that it provides a novel means of predicting the continuous behaviour of soils under various loading paths. Synthetic datasets of cyclic loading under drained and undrained conditions generated by an advanced soil constitutive model are first employed to explore an appropriate framework for the LSTM-based model. Then the LSTM-based model is used to estimate the cyclic behaviour of real sands, ie, the Toyoura sand under the undrained condition and the Fontainebleau sand under both undrained and drained conditions. The estimates are compared with actual experimental results, which indicates that the LSTM-based model can simultaneously simulate the cyclic behaviour of sand under both drained and undrained conditions, ie, (a) the cyclic mobility mechanism, the degradation of effective stress and large deformation under the undrained condition, and (b) shear strain accumulation and densification under the drained condition. 相似文献
14.
A new elastoplastic model called loading memory surface based on the critical state concept and the multi‐surface framework is proposed for geomaterials. The model uses a hypoelastic formulation and two plastic mechanisms. The formulations of the model are made in three‐dimensional stress–strain space and work under both monotonic and cyclic loadings. A newly introduced formalism makes it possible to obtain the cyclic response directly from the monotonic loading one. This formalism gives a three‐dimensional generalization of the well‐known Masing rule. The model has been validated against test results of Hostun sand under several conditions: monotonic and cyclic, drained and undrained, tests in compression and in extension, and at different confining pressures and different densities. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
15.
Foundation soils are often under non-proportional cyclic loadings. The deformation behaviour and the mechanism of non-coaxiality under continuous pure principal stress rotation for clays are not clearly investigated up to now. In order to study the effect of pure principal stress rotation, a series of cyclic undrained tests on Shanghai soft clay subjected to cyclic rotation of principal stress directions keeping the deviatoric stress constant under the pure rotation condition were conducted using hollow cylinder apparatus. Based on this, the evolutions of excess pore pressure and strains during cyclic loading were investigated, together with the effects of the intermediate principal stress parameter and the deviatoric stress level on stress–strain stiffness and non-coaxiality. The result can provide an experimental basis for constitutive modelling of clays describing the behaviour under non-proportional loadings. 相似文献
16.
17.
For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. It is the purpose of these two companion papers to provide such database collected for a fine sand. Part II concentrates on the undrained triaxial tests with strain cycles, where a large range of strain amplitudes has been studied. Furthermore, oedometric and isotropic compression tests as well as drained triaxial tests with un- and reloading cycles are discussed. A combined monotonic and cyclic loading has been also studied in undrained triaxial tests. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain. 相似文献
18.
A large number of constitutive models for geomaterials, such as soils and rocks, have been proposed over the last three decades. Those models have been implemented into computer codes and have been successfully used to solve practical engineering problems particularly under monotonic loading conditions. Compared with the models for monotonic loadings, more improvements for cyclic models are necessary in order to obtain more accurate predictions for the dynamic behavior of geomaterials, e.g., the behavior during earthquakes. A cyclic elastoplastic model has been developed in this study for sandy soils; it is based on the kinematical hardening rule with a yield function that includes the changes in the stress ratio and the mean effective stress considering the degradation of the yield surface. From a simulation with the present model, it has been found that strong non-associativity leads to a large decrease in the mean effective stress during cyclic deformations under undrained conditions, while the model with the associated flow rule does not. This result is quite important because the mean effective stress becomes almost zero at the state of full liquefaction. Compared with the experimental results, the model can accurately reproduce the cyclic behavior of soil. 相似文献
19.
Jean-Herv Prvost 《国际地质力学数值与分析法杂志》1977,1(2):195-216
The proposed general analytical model describes the anisotropic, elasto-plastic, path-dependent, stress-strain-strength properties of inviscid saturated clays under undrained loading conditions. The model combines properties of isotropic and kinematic plasticity by introducing the concept of a field of plastic moduli which is defined in stress space by the relative configuration of yield surfaces. For any loading (or unloading) history, the instantaneous configuration is determined by calculating the translation and contraction (or expansion) of each yield surface. The stress-strain behaviour of clays can thus be determined for complex loading paths and in particular for cyclic loadings. The stress-strain relationships are provided for use in finite element analyses. The model parameters required to characterize the behaviour of any given clay can be derived entirely from conventional triaxial or simple shear soil test results. The model's extreme versatility is demonstrated by using it to formulate the behaviour of the Drammen clay under both monotonic and cyclic loading conditions. The parameters are determined by using solely the results from monotonic and cyclic strain-controlled simple shear experimental tests, and the model's accuracy is evaluated by applying it to predict the results of other tests such as (1) cyclic stress-controlled simple shear tests, (2) monotonic triaxial loading compression and unloading extension tests, and (3) cyclic stress- and strain-controlled triaxial tests on, this same clay. The theoretical predictions are found to agree extremely well with the experimental test results. 相似文献