首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
A seismic hazard assessment study of continental Ecuador is presented in this paper. The study begins with a revision of the available information on seismic events and the elaboration of a seismic catalog homogenized to magnitude Mw. Different seismic source definitions are revised and a new area-source model, based on geological and seismic data, is proposed. The available ground motion prediction equations for crustal and subduction sources are analyzed and selected for the tectonic environments observed in Ecuador. A probabilistic seismic hazard assessment approach is carried out to evaluate the exceedance probability of several levels of peak ground acceleration PGA and spectral accelerations SA (T) for periods (T) of 0.1, 0.2, 0.5, 1 and 2s. The resulting hazard maps for continental Ecuador are presented, together with the uniform hazard spectra of four province capital cities. Hazard disaggregation is carried out for target motions defined by the PGA values and SA (1s) expected for return periods of 475 and 2475 years, providing estimates for short-period and long-period controlling earthquakes.  相似文献   

2.
以武汉城市圈为研究对象,利用空间平滑方法建立了区域的两个地震活动性模型,计算了50年超越概率10%的基岩峰值加速度分布图,与地震动参数区划图的对比表明,其结果能合理反映区域的地震危险性水平.在弱震活动区,基于空间平滑法的地震危险性概率计算能给出可靠的地震动参数.  相似文献   

3.
巴基斯坦沿海地区地震危险性分析   总被引:1,自引:0,他引:1       下载免费PDF全文
通过确定性和概率性方法,对发展迅速的巴基斯坦沿海地区进行了地震危险性评估.根据该地区的地震构造和地质条件,确定了5个地震区域的11个断层作为该地区的潜在震源,计算了每个潜在震源的最大可能震级.根据与之相关震源的最大可信震级,计算了7个沿海城市的峰值加速度(PGA).瓜达尔(Gwadar)和奥尔马腊(Ormara)的峰值加速度分别为0.21和0.25 g,处于地震危险性水平较高的地区;杜尔伯德(Turbat)和卡拉奇(Karachi)位于地震危险性水平较低的地区,峰值加速度小于0.1 g.同时,分别绘制了50年和100年超越概率为10%的PGA区划图,区划图的分区间隔为0.05 g.   相似文献   

4.
Southwest Turkey, along Mediterranean coast, is prone to large earthquakes resulting from subduction of the African plate under the Eurasian plate and shallow crustal faults. Maximum observed magnitude of subduction earthquakes is Mw = 6.5 whereas that of crustal earthquakes is Mw = 6.6. Crustal earthquakes are sourced from faults which are related with Isparta Angle and Cyprus Arc tectonic structures. The primary goal of this study is to assess seismic hazard for Antalya area (SW Turkey) using a probabilistic approach. A new earthquake catalog for Antalya area, with unified moment magnitude scale, was prepared in the scope of the study. Seismicity of the area has been evaluated by the Gutenberg-Richter recurrence relationship. For hazard computation, CRISIS2007 software was used following the standard Cornell-McGuire methodology. Attenuation model developed by Youngs et al. Seismol Res Lett 68(1):58–73, (1997) was used for deep subduction earthquakes and Chiou and Youngs Earthq Spectra 24(1):173–215, (2008) model was used for shallow crustal earthquakes. A seismic hazard map was developed for peak ground acceleration and for rock ground with a hazard level of a 10% probability of exceedance in 50 years. Results of the study show that peak ground acceleration values on bedrock change between 0.215 and 0.23 g in the center of Antalya.  相似文献   

5.
The region of Blida is characterized by a relatively high seismic activity, pointed especially during the past two centuries. Indeed, it experienced a significant number of destructive earthquakes such as the earthquakes of March 2, 1825 and January 2, 1867, with intensity of X and IX, respectively. This study aims to investigate potential seismic hazard in Blida city and its surrounding regions. For this purpose, a typical seismic catalog was compiled using historical macroseismic events that occurred over a period of a few hundred years, and the recent instrumental seismicity dating back to 1900. The parametric-historic procedure introduced by Kijko and Graham (1998, 1999) was applied to assess seismic hazard in the study region. It is adapted to deal with incomplete catalogs and does not use any subjective delineation of active seismic zones. Because of the lack of recorded strong motion data, three ground prediction models have been considered, as they seem the most adapted to the seismicity of the study region. Results are presented as peak ground acceleration (PGA) seismic hazard maps, showing expected peak accelerations with 10% probability of exceedance in 50-year period. As the most significant result, hot spot regions with high PGA values are mapped. For example, a PGA of 0.44 g has been found in a small geographical area centered on Blida city.  相似文献   

6.
A proper assessment of seismic hazard is of considerable importance in order to achieve suitable building construction criteria. This paper presents probabilistic seismic hazard assessment in and around Pakistan (23° N–39° N; 59° E–80° E) in terms of peak ground acceleration (PGA). Ground motion is calculated in terms of PGA for a return period of 475 years using a seismogenic-free zone method of Gumbel’s first asymptotic distribution of extreme values and Monte Carlo simulation. Appropriate attenuation relations of universal and local types have been used in this study. The results show that for many parts of Pakistan, the expected seismic hazard is relatively comparable with the level specified in the existing PGA maps.  相似文献   

7.
软土地基深开挖对场地设计地震动的影响   总被引:16,自引:3,他引:13  
本文根据南京河西地区所处的地震地质环境、地震活动环境及基岩地震动衰减规律,在场址区地震危险性分析基础上确定该地区的基岩地震动参数,并选取河西地区某个典型工程场地,根据场地上的静、动力性能参数的测试结果,进行场地上层地震反应分析,研究软土地基条件下地基深开挖场地的地震动效应及其对场地设计地震动参数的影响.文中给出了设计基准期为50年及100年时对应不同抗震设防水准的设计地震动参数,该结果对河西地区其它高层建筑的抗震设计也有一定的参考价值.  相似文献   

8.
石树中  沈建文 《地震学报》2012,34(1):105-110
指出作为截面抗震验算标准的“小震”混淆了两种明显不同的概念:其一是对应于50年超越概率63%的地震动参数(以下简称“多遇小震”);其二是50年超越概率10%的地震动参数经过折算得到的参数(以下简称“折算小震”).上述混淆导致抗震设计中实际上执行着不同的标准.文中讨论了中、小地震动参数之间关系的复杂性,包括从地震危险性分...  相似文献   

9.
The proposed site of the Diamer Bhasha Dam in northern Pakistan is situated in an active tectonic zone with intensive seismicity, which makes it necessary for seismic hazard analysis(SHA). Deterministic and probabilistic approaches have been used for SHA of the dam site. The Main Mantle Thrust(MMT), Main Karakaram Thrust(MKT), Raikot-Sassi Fault(RKSF) and Kohistan Fault(KF) have been considered as major seismic sources, all of which can create maximum ground shaking with maximum potential earthquake(MPE). Deterministically estimated MPE for magnitudes of 7.8, 7.7, 7.6, and 7.1 can be produced from MMT, MKT, RKSF and KF, respectively. The corresponding peak ground accelerations(PGA) of 0.07, 0.11, 0.13 and 0.05 g can also be generated from these earthquakes, respectively. The deterministic analysis predicts a so-called floating earthquake as a MPE of magnitude = 7.1 as close as 10 km away from the site. The corresponding PGA was computed as 0.38 g for a maximum design earthquake at the project site. However, the probabilistic analysis revealed that the PGA with 50% probability of exceedance in 100 years is 0.18 g. Thus, this PGA value related to the operational basis earthquake(OBE) is suggested for the design of this project with shear wave velocity(V_(s30)) equal to 760 m/s under dense soil and soft rock conditions.  相似文献   

10.
IntroductionAccordingtoEarthquakeResistanceandDisasterReductionLawforthePeoplesRepublicofChina,twomethodsareadoptedforseismicdesignoftheconstructionprojectsinChina.Forkeyprojectsandtheprojectseasytocauseserioussecondarydisasters,seismicsafetyevaluationsmustbecarriedout.Andbasedontheresults,seismicfortificationstandardsaredeterminedtomakeseismicdesign.Forgeneralindustrialandcivilbuildings,seismicdesignsarecarriedoutaccordingtotheseismicfortificationstandardsstipulatedbyseismiczonationmap(Ch…  相似文献   

11.
大中小震与抗震设防标准   总被引:5,自引:1,他引:4       下载免费PDF全文
沈建文  石树中 《地震学报》2004,26(5):533-538
讨论二级抗震设计与超越概率标准、概率法与综合概率法给出的3个水平的地震动的关系. 通过危险性分析的实际例子,讨论了50年超越概率2%、10%和63%的地震动,即大震、中震和小震的相对大小关系,并提出抗震设防标准的确定方法.   相似文献   

12.
根据《兰州轨道交通1号线一期工程地震安全性评价报告》所给出的100年超越概率63%、10%和2%的场地基岩地震加速度时程,利用有限差分软件进行地下隧道硐室的地震反应分析。在模型底部施加基岩地震动,设置监测点监测衬砌结构的弯矩、轴力及剪力随时间的变化过程,得到100年超越概率63%、10%及2%工况下的隧道结构地震响应。结果表明:隧道衬砌结构最大弯矩位于拱顶处,最大轴力位于拱顶和拱底处,最大剪力位于上侧壁或下侧壁处;隧道结构内力随着超越概率的降低而增大;以超越概率63%的结构最大内力为基准值,在超越概率10%和2%时,弯矩分别增大1.2和1.7倍,轴力分别增大1.3和1.5倍,剪力分别增大1.5和2.9倍,增幅最大。这可能预示着隧道结构在强地震动作用下会发生剪切破坏。  相似文献   

13.
工程场地的设计地震动参数,目前多用概率地震危险性分析的方法给出。场地的地震基本烈度以设计基准期T=50年、加速度超越概率P=0.1的标准确定。本文根据广东省数地地震危险性分析结果结合我国常见的砖混结构的地震动参数的优化决策,认为上述标准宜取为T=50年、P=0.05—0.1。  相似文献   

14.
基于中国地震动参数区划图、华北平原地震带和汾渭地震带地震活动性参数、华北地区地震动参数衰减关系,计算北京地区50年、70年、100年不同超越概率水准下基岩峰值加速度.并分析不同年限各超越概率水准下的峰值加速度与该年限超越概率10%的峰值加速度比值,发现各计算格点的比值普遍偏小,按照当前抗震设防标准,所考虑的地震作用偏于保守且安全.  相似文献   

15.
Izmir, the third largest city and one of the major economic centers in Turkey, has more than three million residents and one-half million buildings. The city, located in a seismically active region in western Anatolia, was a subject of the 1997 RADIUS (Risk Assessment Tools for Diagnosis of Urban Areas against Seismic Disaster) project. In this paper, the seismic hazard of Izmir is investigated through probabilistic seismic hazard assessment. First, the seismic setting of Izmir is presented. Considering the statistics of earthquakes that took place in the region during the period 1900–2005, a simple seismic hazard model is used to facilitate the assessment. To account for modeling uncertainties associated with the values of seismicity parameters, a logic tree procedure is employed in carrying out the seismic hazard computations. The resulting weighted average seismic hazard, presented in terms of peak ground acceleration and associated probability of exceedence, could be considered the “best estimate” of seismic hazard for Izmir. Accordingly, for a return period of 475 years, for rock sites, a PGA value of 0.34 g is calculated. This PGA hazard estimate is close to the current code-recommended design acceleration level for Izmir.  相似文献   

16.
In this paper, a new probabilistic seismic hazard assessment (PSHA) is presented for Peninsular India. The PSHA has been performed using three different recurrence models: a classical seismic zonation model, a fault model, and a grid model. The development of a grid model based on a non-parameterized recurrence model using an adaptation of the Kernel-based method that has not been applied to this region before. The results obtained from the three models have been combined in a logic tree structure in order to investigate the impact of different weights of the models. Three suitable attenuation relations have been considered in terms of spectral acceleration for the stable continental crust as well as for the active crust within the Gujarat region. While Peninsular India has experienced large earthquakes, e.g., Latur and Jabalpur, it represents in general a stable continental region with little earthquake activity, as also confirmed in our hazard results. On the other hand, our study demonstrates that both the Gujarat and the Koyna regions are exposed to a high seismic hazard. The peak ground acceleration for 10 % exceedance in 50 years observed in Koyna is 0.4 g and in the Kutch region of Gujarat up to 0.3 g. With respect to spectral acceleration at 1 Hz, estimated ground motion amplitudes are higher in Gujarat than in the Koyna region due to the higher frequency of occurrence of larger earthquakes. We discuss the higher PGA levels for Koyna compared Gujarat and do not accept them uncritically.  相似文献   

17.
The seismic risk analysis results of 79 cities in Xinjiang are presented, and the bedrock peak ground accelerations under three seismic levels and their ratios are discussed. Then, the relationship between earthquake environments and the seismic risk analysis results of different exceeding probabilities are researched. The results show that minor and major earthquake motion parameters calculated from moderate earthquakes do not have a consistent probability and the ratio of bedrock peak accelerations under different exceedance probabilities are closely correlated with earthquake environments.  相似文献   

18.
In many countries such as Spain earthquake databases still mainly comprise macroseismic data from felt effects. The full exploit of this information is of basic importance for seismic risk assessment and emergency planning, given the strict link between macroseismic intensity and damage. A probabilistic procedure specifically developed to handle macroseismic data, mostly relying on site information and seismogenic-source free, has been applied to evaluate seismic hazard in SE-Spain (Alicante-Murcia region). Present seismicity is moderate-low with largest magnitudes slightly over Mw5.0. The historical record includes very destructive earthquakes, maximum EMS98 intensities reaching IX–X and X in the nineteenth century (e.g., Torrevieja 1829 earthquake). Very recently, two events in the area on 11 May 2011 (Mw4.5, Mw5.2) killed nine people, injured 300, and produced important damage in the city of Lorca. Regional hazard maps for the area together with specific hazard curves at selected localities are obtained. Results are compared with the maximum observed intensities in the period 1300–2012, and with the values in the seismic hazard map from the Spanish Building Code in force. In general, the maximum felt intensity values are closer to the hazard values calculated for 2 % probability of exceedance in 50 years, using felt and expected intensity. The intensity-based probabilistic hazard maps obtained through the applied approach reduce the inherent smoothing of those based on standard probabilistic seismic hazard assessment approaches for the region, allowing identifying possible over- or sub-estimates of site hazard values, providing very valuable information for risk reduction strategies or for future updates of the building code hazard maps.  相似文献   

19.
The Son-Narmada-Tapti lineament and its surroundings of Central India (CI) is the second most important tectonic regime following the converging margin along Himalayas-Myanmar-Andaman of the Indian sub-continent, which attracted several geoscientists to assess its seismic hazard potential. Our study area, a part of CI, is bounded between latitudes 18°–26°N and longitudes 73°–83°E, representing a stable part of Peninsular India. Past damaging moderate magnitude earthquakes as well as continuing microseismicity in the area provided enough data for seismological study. Our estimates based on regional Gutenberg–Richter relationship showed lower b values (i.e., between 0.68 and 0.76) from the average for the study area. The Probabilistic Seismic Hazard Analysis carried out over the area with a radius of ~300 km encircling Bhopal yielded a conspicuous relationship between earthquake return period (T) and peak ground acceleration (PGA). Analyses of T and PGA shows that PGA value at bedrock varies from 0.08 to 0.15 g for 10 % (T = 475 years) and 2 % (T = 2,475 years) probabilities exceeding 50 years, respectively. We establish the empirical relationships $ {\text{ZPA}}_{(T = 475)} = 0.1146\;[V_{\text{s}} (30)]^{ - 0.2924}, $ and $ {\text{ZPA}}_{(T = 2475)} = 0.2053\;[V_{\text{s}} (30)]^{ - 0.2426} $ between zero period acceleration (ZPA) and shear wave velocity up to a depth of 30 m [V s (30)] for the two different return periods. These demonstrate that the ZPA values decrease with increasing shear wave velocity, suggesting a diagnostic indicator for designing the structures at a specific site of interest. The predictive designed response spectra generated at a site for periods up to 4.0 s at 10 and 2 % probability of exceedance of ground motion for 50 years can be used for designing duration dependent structures of variable vertical dimension. We infer that this concept of assimilating uniform hazard response spectra and predictive design at 10 and 2 % probability of exceedance in 50 years at 5 % damping at bedrocks of different categories may offer potential inputs for designing earthquake resistant structures of variable dimensions for the CI region under the National Earthquake Hazard Reduction Program for India.  相似文献   

20.
A method to combine probabilistic seismic hazard analysis and stochastic earthquake motion models is presented. A set of parameters characterizing stochastic earthquake motion models is determined on a consistent probabilistic basis. The method proposed herein consists of two steps. First, the ground motion intensity is determined in the context of the conventional hazard curve technique. Next, other ground motion parameters such as duration, predominant frequency and spectral shape parameters are determined as conditional means corresponding to the annual probability of exceedance for the ground motion intensity. Some example applications are presented.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号