共查询到20条相似文献，搜索用时 15 毫秒
1.
The bipole-dipole resistivity technique, which uses a single current source (bipole) to map variations in (apparent) resistivity has been much criticized in the past. A series of 3D models are used to show that the use of two distinct current bipoles in the same location but with different orientations, combined with analysis in the form of a previously defined tensor apparent resistivity, can greatly improve many aspects of bipole-dipole mapping. The model study shows that, for measurement stations more than a few bipole lengths from the current source, the apparent resistivity tensor behaves, to a close approximation, as though the current bipoles are idealized dipoles, and hence is independent of the orientation of the individual current sources used. Any pair of current bipoles (in the same location but with different orientations) can therefore be used to determine the tensor resistivity properties. The invariants of the apparent resistivity tensor have considerable advantages over the normal scalar apparent resistivities. Modelling shows that although the electric field vector corresponding to a single current bipole can be highly perturbed by a local inhomogeneity for some considerable distance beyond the inhomogeneity itself, the tensor invariants are virtually unperturbed beyond the extent of the inhomogeneity. Hence false anomalies, which are a characteristic of apparent resistivity measured using only single current bipole models, are almost completely eliminated by the use of tensor invariants. Of the possible tensor invariants, the invariant given by the square root of the determinant gives the best representation of a buried 3D body. Resistivity anomalies are localized, and occur only over the causative body. Even with complex models involving several buried bodies, the tensor invariants clearly delineate the extent of each body. Outside the bounds of perturbing bodies, the tensor data can be analysed by conventional techniques, for example, to determine layered structure. 相似文献
2.
本文针对多辐射场源地空瞬变电磁法理论,建立了相应的多分量全域视电阻率定义方法.分析了利用磁场强度进行多辐射场源地空系统全域视电阻率定义的优点,针对磁场强度的各个分量,提出了各自的全域视电阻率算法,实现了多分量、全时域、全空域视电阻率计算,并分析了偏移距对全域视电阻率的影响.通过调整源的相对位置及电流方向等参数,多辐射源瞬变电磁地空系统不仅可以加强不同分量信号强度,削弱随机干扰,还可更好地分辨地下异常体的位置.通过对所设计模型的处理,证实了多辐射场源地空系统多分量全域视电阻率算法的有效性,也验证了多辐射场源地空系统的优势. 相似文献
3.
Conventional electrical prospecting can be extended to the search for deep-seated hydrocarbon deposits, by using the steel casings of drill-holes as vertical line sources. These sources produce at depth a density of current higher than the density created by point sources located at the ground surface. Several tests have shown that the contrast of conductivity between resistive hydrocarbon deposits and the surrounding salt water produces relevant anomalies on a resistivity map obtained with vertical line sources, especially where there exists a superficial masking effect caused by a highly resistive layer. In a survey carried out in the USSR, combined measurements were performed, both with line source and with surface point sources. The detected residual resistivity anomaly roughly delineates the contours of the known hydrocarbon deposit. 相似文献
4.
直流电阻率法被广泛应用在工程和环境及水文地球物理、野外采矿、地热探测等领域.地下岩石常具有层理面和裂缝等具有方向依赖性的结构,岩石电导率常常呈现各向异性特征,因此研究复杂直流电阻率各向异性问题的高精度正演算法具有迫切的理论和学术需求.本文利用面向目标的自适应有限元算法和非结构化网格相结合的方式,解决了带地形任意复杂直流电阻率各向异性问题的高精度正演这一难题.有别于前人的研究成果,本文提出了一种特别的二次虚拟场算法实现带源的任意起伏地形问题模拟;另外,本文第一次基于电流密度连续性条件构建适合直流电阻率各向异性问题的后验误差估计算法,有效地驱动面向目标有限元网格自适应加密过程.最后,通过三组电阻率各向异性模型验证本文提出算法的正确性和适应性,测试结果表明：对于任意复杂直流电阻率各向异性问题,本文提出的算法具有精度高、适应性强等特点;另外,我们还发现电流密度连续性条件可用于设计直流电阻率问题的有效后验误差估计算法. 相似文献
5.
直流电阻率法以其对含水构造响应敏感且适应性强的特点,是隧道施工期超前地质预报的常用方法.针对目前定点源三极观测方式易受到测线附近旁侧异常干扰与聚焦观测方式探测距离过短无法三维成像的问题,提出了一种基于多同性源阵列电阻率的隧道超前探测新方法,利用环形布置的多同性源供电压制隧道掌子面后方的异常体的干扰,同时增强掌子面前方远处异常体的敏感度,阵列电极测量可为含水构造的三维反演成像提供三维数据.首先,开展了含水构造超前探测的数值正演模拟,发现多同性源方法的视电阻率纵向微分曲线极小值以及与横轴的交点位置可对异常体位置进行定性判断,探讨了多同性源方法对后方及侧向异常干扰的响应特征及识别方法.其次,将电阻率光滑约束与轨迹光滑策略引入蚁群反演算法,提出了一种最小二乘方法与改进蚁群算法相结合的混合反演算法,反演数值算例表明混合反演算法能够实现含水构造的三维成像,较好地反演出不同距离的含水构造位置,并使其边界较为清晰.为了验证多同性源探测方法的探测效果开展了物理模型试验,多同性源阵列电阻率法能较好的反映含水构造的存在,与实际含水构造的位置较为相符. 相似文献
6.
在坑道超前探测方法中,直流电阻率法原理和操作简单,应用前景广阔,其中侧向聚焦电阻率法应用在测井中已经成为一种常用方法.本文研究了三维坑道直流聚焦法电极组合,首先计算分析了两个同性点电源的电流分布规律,指出由于电流的相互排斥作用,电流密度在这两个点电源的中垂线下一定深度处产生最大值,这个深度与这两个点源之间的距离成正比.基于上述原理,设计出三种电极组合：四点电源、五点电源和九点电源布极方式.其次,用三维有限单元数值模拟的方法计算了上述三种电极系的空间电位分布,得出九点电源方式对电流聚束效果较好,而且当主电极电流小于屏蔽电极电流时效果最好. 相似文献
7.
APPARENT RESISTIVITY TEMPORAL VARIATION CHARAC-TERISTICS AFFECTED BY THE FIXED DISTURBANCE SOURCE ON SURFACE OF MEASURING AREA 
下载免费PDF全文
下载免费PDF全文 Current leakage,metallic conductor,and local anomalous resistivity body are main disturbance sources which affect the successive observation of apparent resistivity in stations,besides the observing system failure.We construct a finite element model using a 3-layered horizontal medium to discuss the dynamic characteristics of disturbances caused by metal conductor and local anomalous resistivity body in the measuring filed.The numerical results show that low resistivity source which is located in areas where the sensitivity coefficient is positive will cause decline on apparent resistivity observation.While low resistivity source will cause increase when it is located in areas where the sensitivity coefficient is negative.Disturbance caused by high resistivity source is opposite to the one from low resistivity source.The general dynamic feature of disturbance is that the disturbance amplitude increases as the resistivity of shallow layer decreases,while the amplitude declines when the shallow layer's resistivity increases.For the measuring direction which has normal annual variation form,low resistivity source which is located in area where the sensitivity coefficient is positive will increase the annual variation amplitude,while it will reduce annual amplitude when it is in a negative sensitivity coefficient area.Annual amplitude changes caused by high resistivity source are opposite to the changes caused by low resistivity source.For the measuring direction which has abnormal annual variation form,dynamic annual feature is opposite to the one in direction of normal annual variation form.If the dynamic feature is opposite to the annual variation and disturbance amplitude is also greater than annual amplitude,the annual variation will change direction.Disturbance amplitude from metallic conductor is affected by the resistivity and cross-section area,the lower of the resistivity and the larger of the cross-section area,the greater of the disturbance amplitude. 相似文献
8.
井地电阻率成像法利用井套管作电流源向井下供入大功率直流电流,在地表测量由地下介质的电性变化形成的电位分布,通过反演可得到地下介质的电阻率分布.针对大斜度井和水平井开展井地三维电阻率数值模拟和反演研究,对油田注水及压裂效果监测具有重要意义.基于井地电阻率成像法原理,采用有限差分法和不完全切勒斯基共轭梯度法进行了三维正演模拟,研究了大斜度井和水平井的井地电位响应特征.提出了采用层状约束阻尼最小二乘法由浅到深地进行大斜度井和水平井的多层联合反演,并对实际水平井井地电位各个层段数据进行了三维反演.模拟结果表明,倾斜线源和水平线源会对地面电位响应产生明显影响,在反演中需要考虑线源形态.实际水平井井地电位反演成像表明,考虑倾斜线源或者水平线源的联合反演得到了准确的水平井三维注水层成像图,得出注水层的真电阻率分布,能够判断注水运移方向. 相似文献
9.
本文以三层电剖面模型计算出由于电剖面参数变化而引起的视电阻率变化,进而说明因地下水位变化所引起的视电阻率变化是可能估计的。根据这个结果能够确定出由于地下水干扰所引起的视电阻率异常幅度,这将有利于视电阻率变化与地震关系的定性、定量分析研究。实际工作表明,视电阻率变化很复杂,许多因素都会使视电阻率发生变化,但水的影响很重要,因此,研究这个问题有重要意义。 相似文献
10.
R. H. MERKEL 《Geophysical Prospecting》1971,19(4):626-639
Boundary-value problems in steady-state current flow were solved numerically for one and two layers over a half-space. Solutions were obtained for layers of various resistivities where one of the current sources was placed below the surface and the second kept at some finite distance from the drill hole. When a fixed surface dipole receiving pair was used, it was found that as the buried source approached a conductive region, quite good determinations of the depth to the conductor could be made, hence reducing the possibility of extended drilling in “dry” holes resulting from poor surface data and/or interpretation. Numerous models were generated to find the optimum positioning of the two current electrodes for different field situations of this type. It was also found that by placing a current source in the conductive region, better resolution of the lateral extent of a possible ore zone could be obtained, due both to the more rapid convergence of the apparent resistivity to the resistivity of the conductor, and the fact that a smaller separation in the receiving dipole could be used. Numerous analog models were constructed to verify the digital results. Surface and down-hole resistivity field data are compared to show the strength of this technique in delineating structure. 相似文献
11.
A solution based on Tabarovskii's coupled pair of surface integral equations is given for the potential of a direct current flowing in an electrically anisotropic body and within the enclosing isotropic surroundings. The sources of the secondary potential exterior and interior to the body are fictitious surface charge distributions. The equations are solved numerically using point matching with pulse functions as subsectional basis functions. The model used in the applications is a long prism, excited by long line current electrodes aligned parallel to the strike. The strike length is set at a length sufficient to guarantee 2D behaviour of the model. Comparisons of computation results indicate that for the models, electrode arrays and numerical procedures applied, the solutions based on fictitious surface sources converge faster and behave more regularly than those based on real surface charges. When compared with previously published integral equation solutions, the present solution seems to be relatively efficient, even in the case of purely isotropic models. The model experiments also showed that at moderate resistivity contrasts, the anomaly shapes are strongly dependent on the directions of the principal axes of the body resistivity. However, when the external resistivity is more than 100 times that of the geometric mean of the principal resistivities in the body, with the principal resistivities differing from each other by at most one order of magnitude, the contribution of the anisotropy to the anomaly diminishes as a result of electrical saturation. 相似文献
12.
针对任意各向异性地层,利用极向型和环向型标量位函数,导出相应的直流电视电阻率和磁电阻率的磁场响应关系.计算了各向异性地层的直流电视电阻率和磁电阻率响应特征,重点分析了电阻率测深方法与磁电阻率探测方法对地下各向异性介质的探测能力.文中采用状态矩阵的分析方法,首先采用极向型和环向型标量位构造了各向异性层状介质电场与磁场的通解,利用各层界面电场、磁场的连续性及地面激励源的耦合条件,推导了不同层之间电磁场的状态矩阵,建立了空间电场与磁场的递归计算关系.其次,针对递归计算中指数项数值计算的不稳定性,借用状态矩阵的性质,导出了将不稳定指数计算项转化为稳定的指数项的转换关系.针对横向各向同性(TI)介质中极向位与环向位解耦的特点,导出了电磁场的直接积分解.最后,采用解析解验证了算法的正确性,给出了多层各向异性地层模型的视电阻率和磁场响应曲线,分析了直流电法探测裂缝性地层、估计裂缝分布性状的可能性. 相似文献
13.
George F. Risk T. Grant Caldwell Hugh M. Bibby 《Journal of Volcanology and Geothermal Research》2003,127(1-2):33-54
Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary. 相似文献
14.
The controlled source extremely low frequency (CSELF) electromagnetic method is characterized by extremely long and powerful sources and a huge measurement range. Its electromagnetic field can therefore be affected by the ionosphere and displacement current. Research on 3D forward modeling and inversion of CSELF electromagnetic data is currently in its infancy. This paper makes exploratory attempts to firstly calculate the 1D extremely low frequency electromagnetic field under ionosphere-air-earth coupling circumstances, and secondly analyze the propagation characteristics of the background electromagnetic field. The 3D staggered-grid finite difference scheme for solving for the secondary electric field is adopted and incorporated with the 1D modeling algorithm to complete 3D forward modeling. Considering that surveys can be carried out in the near field and transition zone for lower frequencies, the 3D Limited-memory Broyden-Fletcher-Goldfarb-Shanno (LBFGS) inversion of CSELF electromagnetic data is presented (in which the sources, or primary fields, are included), with the aim of directly inverting the impedance data, regardless of where it is acquired. Derivation of the objective functional gradient is the core component in the inversion. Synthetic tests indicate that the well-chosen approximation to the Hessian can significantly speed up the inversion. The model responses corresponding to the coexistence of conductive and resistive blocks show that the off-diagonal components of tensor impedance are much more sensitive to the resistivity variation than the diagonal components. In comparison with conventional scalar inversion, tensor inversion is superior in the recoveries of electric anomalies and background resistivity. 相似文献
15.
地铁建设对江宁地电台地电阻率观测造成较大影响,通过分析观测数据,比较了地表、井下观测受地铁等因素的干扰情况,并探讨了用影响系数来研究地表、井下观测的地表浅层干扰抑制能力,得到以下初步结果:①地铁试运行期间的干扰影响大于正式运营;②井下观测对供电电流更加敏感;③井下观测能够减轻地铁等的干扰,其地表浅层干扰抑制能力优于地表观测,可作为地电观测的重点发展方向之一。 相似文献
16.
常规电测井一般通过测量供电电极的电流和测量电极之间的电位差来计算围岩的视电阻率并划分地层界面,而忽略了对电流参数的利用。本文基于欧姆定律,通过供电电极电流的变化定性分析其周围岩矿石电阻的变化,进而用电流强度变化曲线识别地层属性。理论分析和试验结果表明,供电电极电流大小取决于电极的接触电阻,而视电阻率大小取决两个测量电极之间或供电与测量电极之间介质的电阻率总和,因此,电流比视电阻率对地层的灵敏度要高一些。绘制电流强度测井曲线可以准确划分地层层位,确定地层厚度,且不增加成本。 相似文献
17.
Harold M. Moorey 《Pure and Applied Geophysics》1958,40(1):164-171
Summary The formula for apparent resistivity can be interpreted in terms of two quantities more easily identified with the physical process involved: the distribution of current flow in the earth, as it affects the current density along a line between the potential electrodes, and the true resistivity along this line. The analysis permits a qualitative prediction of resistivity sounding and profiling data over a variety of structures. Examples are given for faults, layers, and a dipping dike. 相似文献
18.
在广西龙滩库区布置2条北北西-南东东向大地电磁探测剖面进行了32个测点的观测,观测频段为320 Hz~1000 s.对2条剖面上测量和计算得到的各种电磁参数、深部电性结构图像以及库区地质构造、岩性和水域分布等进行分析研究.结果显示库区发育的6条断裂在电性上表现为不同程度的电性差异边界,其中拉浪-达良断裂和拉色-辉马断裂为库区主要断裂带.库区深部电性结构总体表现为纵向上自地表到20 km深度呈现高-低-高的波浪起伏的三层结构,横向上呈明显的高低电阻块状组合样式.龙滩库区4个地震丛集区的震源都位于高、低电阻接触带附近,其中3个地震丛集区的震源位于低阻特性的石炭系地层的下部,为岩溶水体诱发地震;发生最大震级的地震丛集区的震源位于上宽下窄似"铆钉状"的高阻体下部,推测是因水库蓄水后水体压力增大和库水渗透作用下在聚集高变形能的脆性高电阻体内部发生的地震. 相似文献
19.
Two-dimensional joint inversion of radiomagnetotelluric and direct current resistivity data 总被引：2，自引：0，他引：2
An algorithm for the two-dimensional (2D) joint inversion of radiomagnetotelluric and direct current resistivity data was developed. This algorithm can be used for the 2D inversion of apparent resistivity data sets collected by multi-electrode direct current resistivity systems for various classical electrode arrays (Wenner, Schlumberger, dipole-diplole, pole-dipole) and radiomagnetotelluric measurements jointly. We use a finite difference technique to solve the Helmoltz and Poisson equations for radiomagnetotelluric and direct current resistivity methods respectively. A regularized inversion with a smoothness constrained stabilizer was employed to invert both data sets. The radiomagnetotelluric method is not particularly sensitive when attempting to resolve near-surface resistivity blocks because it uses a limited range of frequencies. On the other hand, the direct current resistivity method can resolve these near-surface blocks with relatively greater accuracy. Initially, individual and joint inversions of synthetic radiomagnetotelluric and direct current resistivity data were compared and we demonstrated that the joint inversion result based on this synthetic data simulates the real model more accurately than the inversion results of each individual method. The developed 2D joint inversion algorithm was also applied on a field data set observed across an active fault located close to the city of Kerpen in Germany. The location and depth of this fault were successfully determined by the 2D joint inversion of the radiomagnetotelluric and direct current resistivity data. This inversion result from the field data further validated the synthetic data inversion results. 相似文献
20.
It is proposed that the Straightforward Inversion Scheme (SIS) developed by the authors for 1D inversion of resistivity sounding and magneto-telluric sounding data can also be used in similar fashion for time-domain induced polarization sounding data. The necessary formulations based on dynamic dipole theory are presented. It is shown that by using induced polarization potential, measured at the instant when steady state current is switched off, an equation can be developed for apparent ‘chargeability–resistivity’ which is similar to the one for apparent resistivity. The two data sets of apparent resistivity and apparent chargeability–resistivity can be inverted in a combined manner, using SIS for a common uniform thickness layer earth model to estimate the respective subsurface distributions of resistivity and chargeability–resistivity. The quotient of the two profiles will give the sought after chargeability profile. A brief outline of SIS is provided for completeness. Three theoretical models are included to confirm the efficacy of SIS software by inverting only the synthetic resistivity sounding data. Then one synthetic data set based on a geological model and three field data sets (combination of resistivity and IP soundings) from diverse geological and geographical regions are included as validation of the proposal. It is hoped that the proposed scheme would complement the resistivity interpretation with special reference to shaly sand formations. 相似文献