首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 171 毫秒
1.
F. 《Earth》2005,70(3-4):167-202
Sand-rich submarine fans are radial or curved in plan view depending on the slope of the basin floor. They occur isolated or in coalescing systems. The fans' average lateral extent measures close to 25 km and their thickness usually less than 300 m. The thickness of outer fan sequences averages around 120 m and that of middle fan successions around 160 m. Rarely reported inner fan sequences have a maximum thickness of 80 m.

The formation of sand-rich fans is closely related to tectonic activity. Their sediment is coarse-grained and compositionally immature as indicated by significant feldspar content due to close provenance and rapid transport by short rivers with a steep gradient controlled by tectonism. Tectonic activity also provides for narrow shelves making the fans relatively insensitive to sealevel changes. Formation of sand-rich fans typically occurs in restricted continental basins. The tectonic settings are highly variable. Sand-rich fans typically receive their sediment through submarine canyons which intercept sand from longshore drift and/or are fed more or less directly by regional rivers.

The type of ancient fan system (radial, curved, isolated, coalescing) may be identified through paleocurrent map plots, facies map sketches, recognition of lateral thickness variations and sediment influx centers, as well as lateral bed correlations defining the minimum fan extent.

Important in distinguishing different environments of ancient fans are detailed measured sections, their comparison and correlation. Channelized inner fan and middle fan deposits may be distinguished from the unchannelized outer fan successions through bed correlation tests which reflect their different stratigraphic architectures and bedding patterns. Bedding in outer fan deposits (lobes) is relatively simple, parallel, and regular. The lateral bed continuity is relatively high. Channel fills, especially those of middle fan distributary channels, display a complicated bedding pattern with vertical and lateral random distribution of channel fills, axial erosion, and bed convergence towards the channel margins. Channel fills exhibit only linear bed continuity. Thus, the probability in carrying out local to regional scale lateral bed correlations is almost exclusively limited to outer fan deposits.

The measured sections will help further distinguish fan environments by revealing: (1) different facies associations in outer fan sequences (mainly B, C and D) and middle fan successions (mainly A, B, C, D, and channel margin facies); (2) greater average bed and layer thicknesses in middle fan as opposed to outer fan successions (“bed” and “layer” as used herein); (3) more frequent amalgamation surfaces in channel fills than in unchannelized outer fan deposits; (4) more frequent tabular amalgamation surfaces in outer fan sections; (5) more frequent nontabular amalgamation surfaces in channel fills; and (6) more frequent dish structures in middle fan than outer fan successions.

Rarely exposed fan valley fills may be identified by coarse conglomerates. Moreover, in proximity to fan valley fills, relatively mud-rich sediments may be observed that derive from the depositional system of the basin slope.  相似文献   


2.
Two Palaeogene fluvial fan systems linked to the south‐Pyrenean margin are recognized in the eastern Ebro Basin: the Cardona–Súria and Solsona–Sanaüja fans. These had radii of 40 and 35 km and were 800 and 600 km2 in area respectively. During the Priabonian to the Middle Rupelian, the fluvial fans built into a hydrologically closed foreland basin, and shallow lacustrine systems persisted in the basin centre. In the studied area, both fans are part of the same upward‐coarsening megasequence (up to 800 m thick), driven by hinterland drainage expansion and foreland propagation of Pyrenean thrusts. Fourteen sedimentary facies have been grouped into seven facies associations corresponding to medial fluvial fan, channelized terminal lobe, non‐channelized terminal lobe, mudflat, deltaic, evaporitic playa‐lake and carbonate‐rich, shallow lacustrine environments. Lateral correlations define two styles of alluvial‐lacustrine transition. During low lake‐level stages, terminal lobes developed, whereas during lake highstands, fluvial‐dominated deltas and interdistributary bays were formed. Terminal lobe deposits are characterized by extensive (100–600 m wide) sheet‐like fine sandstone beds formed by sub‐aqueous, quasi‐steady, hyperpycnal turbidity currents. Sedimentary structures and trace fossils indicate rapid desiccation and sub‐aerial exposure of the lobe deposits. These deposits are arranged in coarsening–fining sequences (metres to tens of metres in thickness) controlled by a combination of tectonics, climatic oscillations and autocyclic sedimentary processes. The presence of anomalously deeply incised distributary channels associated with distal terminal lobe or mudflat deposits indicates rapid lake‐level falls. Deltaic deposits form progradational coarsening‐upward sequences (several metres thick) characterized by channel and friction‐dominated mouth‐bar facies overlying white‐grey offshore lacustrine facies. Deltaic bar deposits are less extensive (50–300 m wide) than the terminal lobes and were also deposited by hyperpycnal currents, although they lack evidence of emergence. Sandy deltaic deposits accumulated locally at the mouths of main feeder distal fan streams and were separated by muddy interdistributary bays; whereas the terminal lobe sheets expand from a series of mid‐fan intersection points and coalesced to form a more continuous sandy fan fringe.  相似文献   

3.
Sandy lobe deposits on submarine fans are sensitive recorders of the types of sediment gravity flows supplied to a basin and are economically important as hydrocarbon reservoirs. This study investigates the causes of variability in 20 lobes in small late Pleistocene submarine fans off East Corsica. These lobes were imaged using ultra‐high resolution boomer seismic profiles (<1 m vertical resolution) and sediment type was ground truthed using piston cores published in previous studies. Repeated crossings of the same depositional bodies were used to measure spatial changes in their dimensions and architecture. Most lobes increase abruptly down‐slope to a peak thickness of 8 to 42 m, beyond which they show a progressive, typically more gradual, decrease in thickness until they thin to below seismic resolution or pass into draping facies of the basin plain. Lobe areas range from 3 to 70 km2 and total lengths from 2 to 14 km, with the locus of maximum sediment accumulation from 3 to 28 km from the shelf‐break. Based on their location, dimensions, internal architecture and nature of the feeder channel, the lobes are divided into two end‐member types. The first are small depositional bodies located in proximal settings, clustered near the toe‐of‐slope and fed by slope gullies or erosive channels lacking or with poorly developed levées (referred to as ‘proximal isolated lobes’). The second are larger architecturally more complex depositional bodies deposited in more distal settings, outboard more stable and longer‐lived levéed fan valleys (referred to as ‘composite mid‐fan lobes’). Hybrid lobe types are also observed. At least three hierarchical levels of compensation stacking are recognized. Individual beds and bed‐sets stack to form lobe‐elements; lobe‐elements stack to form composite lobes; and composite lobes stack to form lobe complexes. Differences in the size, shape and architectural complexity of lobe deposits reflect several inter‐related factors including: (i) flow properties (volume, duration, grain‐size, concentration and velocity); (ii) the number and frequency of flows, and their degree of variation through time; (iii) gradient change and sea floor morphology at the mouth of the feeder conduit; (iv) lobe lifespan prior to avulsion or abandonment; and (v) feeder channel geometry and stability. In general, lobes outboard stable fan valleys that are connected to shelf‐incised canyons are wider, longer and thicker, accumulate in more basinal locations and are architecturally more complex.  相似文献   

4.
在海外选区研究阶段,盆地勘探程度极低,资料贫乏,导致常规深水沉积分析工作很难开展。而陆坡形态与陆坡迁移轨迹富含丰富的地质信息,可借助二者的组合对深水沉积进行宏观分析。以二维地震资料为基础,应用陆坡形态-迁移轨迹组合法寻找大型富砂深水扇的有利发育区。A盆地发育上升型、平直型、下降型三种陆坡迁移轨迹类型,其中平直-下降型迁移轨迹对应的陆坡进积距离更大,更有利于发育大型深水扇沉积;同时A盆地发育上凸型、下凹型、直线型和坡坪型四种陆坡类型,上凸型与下凹型陆坡的坡度更缓,宽度更大,更有利于重力流的砂泥分异,从而形成富砂深水扇沉积。将同一时期的大型、富砂深水扇的有利分布区相叠合,重叠区域即为该时期大型富砂深水扇的有利发育区,主要位于盆地东部拐角带与盆地西部。同时应用组合法还可建立盆地漂移期的沉积演化模式,分析漂移期沉积演化历史。  相似文献   

5.
A complete transect of a fossil carbonate ramp slope has been reconstructed using outcrop data from the Lower-Middle Eocene Anotz Formation in the western Pyrenees. The Anotz Formation contains four calciclastic (mostly bioclastic) members encased within hemipelagic marl/limestone alternations, each calciclastic member representing a submarine fan system. Individual fans are composed of a gullied upper slope, a leveed feeder channel, a channelized lobe area, an unconfined lobe zone and a peripheral lobe fringe that grades downcurrent into basinal deposits. Quantitative data on the dimensions and degree of lateral continuity and vertical connectivity of the Anotz calciclastic fan elements are presented. These data provide information for a better understanding of the intrinsic nature of calciclastic submarine fans and to model their reservoir potential. The long-term evolution of the Anotz carbonate slope was generally progradational, as evidenced by the four discrete episodes of calciclastic-fan development. The location of the fans was controlled by the synsedimentary tectonic activity of the Pamplona fault, which created a slope valley along which the reworked shallow-water calciclastic sediments were funnelled. In addition, episodic basinward tilting of the shallow-water carbonate ramp, linked to the development of the South Pyrenean foreland basin, switched on and off the process of calciclastic resedimentation and determined the growth or abandonment of the fan systems.  相似文献   

6.
The Maesan fan-delta-fed slope system in the Miocene Pohang Basin occurs between two Gilbert-type fan deltas. Detailed analysis of sedimentary facies and bed geometry reveals that the sequence is represented by 13 sedimentary facies. These facies can be organized into three facies associations, representing distinct depositional environments: alluvial fan (facies association I), steep-faced slope (facies association II), and basin plain (facies association III). Subaerial debris flows and dense, inertia-dominated currents were transformed into subaqueous sediment gravity flows in steep-faced slope environments. Further downslope, these flows were channelized and formed lobate conglomerate and sandstone bodies at the terminal edge of the channels (or chutes). Interchannel and interlobe areas were dominated by homogeneous mudstone and muddy sandstone, deposited by suspension settling of fine-grained materials. Part of the steep-faced slope deposits experienced large-scale slides and slumps. The chutes/channels, lobes and splays on the steep-faced slope of the Maesan system are similar to those in modern subaqueous coarse-grained fan-delta systems.  相似文献   

7.
The late Pleistocene and Holocene stratigraphy of Navy Fan is mapped in detail from more than 100 cores. Thirteen 14C dates of plant detritus and of organic-rich mud beds show that a marked change in sediment supply from sandy to muddy turbidites occurred between 9000 and 12,000 years ago. They also confirm the correlation of several individual depositional units. The sediment dispersal pattern is primarily controlled by basin configuration and fan morphology, particularly the geometry of distributary channels, which show abrupt 60° bends related to the Pleistocene history of lobe progradation. The Holocene turbidity currents are depositing on, and modifying only slightly, a relict Pleistocene morphology. The uppermost turbidite is a thin sand to mud bed on the upper-fan valley levées and on parts of the mid-fan. Most of its sediment volume is in a mud bed on the lower fan and basin plain downslope from a sharp bend in the mid-fan distributary system. Little sediment occurs farther downstream within this distributary system. It appears that most of the turbidity current overtopped the levée at the channel bend, a process referred to as flow stripping. The muddy upper part of the flow continued straight down to the basin plain. The residual more sandy base of the flow in the distributary channel was not thick enough to maintain itself as gradient decreased and the channel opened out on to the mid-fan lobe. Flow stripping may occur in any turbidity current that is thick relative to channel depth and that flows in a channel with sharp bends. Where thick sandy currents are stripped, levée and mid-fan erosion may occur, but the residual current in the channel will lose much of its power and deposit rapidly. In thick muddy currents, progressive overflow of mud will cause less declaration of the residual channelised current. Thus both size and sand-to-mud ratio of turbidity currents feeding a fan are important factors controlling morphologic features and depositional areas on fans. The size-frequency variation for different types of turbidity currents is estimated from the literature and related to the evolution of fan morphology.  相似文献   

8.
陆架边缘三角洲研究进展及实例分析   总被引：2，自引：1，他引：1  
自上世纪90年代以来,发育在大陆架边缘的一种特殊类型的三角洲（shelf-edge delta）,因其厚度大,分布面积广,储层物性好,常常与陆坡深水扇体伴生,成藏条件好等特点而引起了广泛关注,成为当前国际沉积学界研究的热点和油气勘探新领域。陆架边缘三角洲一般形成于相对海平面下降或低位时期,主要受控于物源供给、可容纳空间和气候变化,并受到陆坡构造活动影响;也可发育在高位时期,受到波浪与潮汐的影响。前人提出了利用陆架边缘迁移轨迹预测深水沉积和基于陆架斜坡发育模式预测深水沉积的模型,即强烈抬升的陆架边缘迁移轨迹、强烈加积的陆架斜坡发育模式,对应的深水区物质传输体系为泥质;水平—轻微下降的陆架边缘迁移轨迹、强烈前积的陆架斜坡发育模式,预示着大量砂体被搬运至深水区;轻微抬升的陆架边缘迁移轨迹、加积与前积的陆架斜坡发育模式,暗示深水沉积砂体发育介于上述二者陆架边缘迁移与深水扇预测模式之间。陆架边缘三角洲—深水扇规模砂体毗邻优质烃源岩,具备多种类型的油气运移通道,成藏条件良好,是油气勘探的有利领域。实例分析表明:渐新世珠海组沉积时期构造相对稳定,在古珠江充足的供源条件下,南海北坡珠江口盆地鹤山凹陷发育陆架边缘三角洲并伴随陆架不断向海迁移而不断进积,S型前积体不断向海迁移,并在晚期发育下切谷及大型盆底扇沉积。鹤山凹陷珠海组沉积时期发育水平—轻微下降的陆架边缘迁移轨迹,对应于强烈前积的陆架斜坡发育模式,在珠海组沉积晚期发育较大规模叠合连片深水扇富砂沉积体系,是研究区极好的潜在油气勘探目标。  相似文献   

9.
J. R. INESON 《Sedimentology》1989,36(5):793-819
The Cretaceous of west James Ross Island, Antarctica represents the proximal fill of a late Mesozoic back-arc basin that was probably initiated by oblique extension during the early development of the Weddell Sea. The succession records sedimentation in two contrasting depositional systems: a laterally persistent slope apron flanking the faulted basin margin interrupted both spatially and temporally by coarse-grained submarine fans. Slope apron deposits are dominated by thinly interbedded turbiditic sandstones and mudstones (mudstone association), interspersed with non-channelized chaotic boulder beds, intraformational slump sheets and isolated exotic blocks representing a spectrum of mass-flow processes from debris flow to submarine gliding. Localized sand-rich sequences (sandstone-breccia association) represent sandy debris lobes at the mouths of active slope chutes. The submarine fan sediments (conglomerate association) are typified by coarse conglomerates and pebbly sandstones, interpreted as the deposits of high-density turbidity currents and non-cohesive debris flows. Three assemblages are recognized and are suggested to represent components of the inner channelled zone of coarse-grained submarine fans, from major fan channels through ephemeral, marginal channels or terraces to levee or interchannel environments. The occurrence of both slope apron and submarine fan depositional systems during the Early and Mid-Cretaceous is attributed to localized input of coarse arc-derived sediment along a tectonically active basin margin. Periods of extensive fan development were probably linked to regional tectonic uplift and rejuvenation of the arc source region; cyclicity within individual fan sequences is attributed to migration or switching of fan channels or canyons. Slope apron sedimentation was controlled largely by intrabasinal tectonics. Local unconformities and packets of amalgamated slide sheets and debris flow deposits probably reflect episodic movement on basin margin faults. Differential subsidence across the basin margin anchored the basin slope for at least 20 Myr and precluded basinward progradation of shallow marine environments.  相似文献   

10.
Based on an unusual data set comprises bathymetric data, backscatter imagery, seismic-reflection and Chirp profiles, and sediment cores, the Late Quaternary lobe at the mouth of the youngest turbidite channel off the western Nile deep-sea fan was investigated. The large-scale construction of the lobe through time and space is mainly controlled by 1) a pre-existing topography inherited from the downslope movement of Messinian evaporites, and 2) the type and nature of gravity flows delivered to the basin floor. The margins of the lobe are defined by high-backscatter acoustic facies that contrasts strongly with the low-backscatter facies from the surrounding abyssal-plain deposits. Within the lobe, low-backscatter facies characterise the main channel-levee systems and lobate bodies immediately beyond the end of the channels. Cores reveal that the high-backscatter facies corresponds to a series of extensive but thin debris-flow deposits with a fingered margin. These debrites comprise a muddy-sand matrix and dispersed clasts with diameter of 5 to 10 cm. The lower backscatter facies at channel mouths corresponds to alternations of thin sandy turbidites and muddy hemipelagites. Extensive thin debris flows therefore traversed surprisingly low gradients to reach the distal fringes of the lobe complex but are never found in the lobate bodies just beyond the channel mouths. Although the Nile deep-sea fan is considered as a silt/mud-rich accumulation, sand-prone deposits exist within the lobe. This sand/mud segregation results either from the presence of channelized features in the lobe and/or from the hydrodynamic process of particle transport by debris flows and turbulent flows.  相似文献   

11.
The main sediment depocenter along the Oman margin is the Al Batha turbidite system that develops in the Gulf of Oman basin. It is directly connected to the wadi Al Batha, and forms a typical sand and mud rich point source system that acts as regional sediment conduit and feeds a ~ 1000 km2 sandy lobe.The Al Batha lobe depositional architecture has been investigated in detail using very high-resolution seismic, multibeam echosounder data and sediment cores. Several scales of depositional architecture can be observed. The Al Batha lobe is composed of several depositional units, made of stacked elementary sediment bodies (thinner than 5 m) that are each related to a single flow event. The lobe is connected to the feeder system through a channel-lobe transition zone (CLTZ) that extends on more than 25 km. The lobe can be divided into proximal, middle and distal lobe areas. The proximal lobe is an area of erosion and by-pass with small axial feeder channels that rapidly splay into several small distributaries. They disappear in the mid-lobe area where deposits consist of vertically stacked tabular to lens-shaped sediment bodies, with a lateral continuity that can exceed 10 km. The distal lobe fringe shows a classical facies transition towards thin-bedded basin plain deposits.Sub-surface deposits consist of sandy turbidites and hyperpycnites, interbedded with fine-grained deposits (thin turbidites, hyperpycnites, or hemipelagites). Although these distal deposits are mainly related to flow transformations and concentration evolution, they highlight the importance of flooding of the wadi Al Batha on the sediment transfer to the deep basin. The thick sandy hyperpycnites recovered in such a distal area are also possibly related to the initial properties of gravity flows, in relation to the flooding characteristics of mountainous desert streams.Finally, the Al Batha lobe depositional architecture is typical of sand-rich lobes found within “small”, sand and mud rich turbidite systems fed by mountainous “dirty” rivers. Turbidite sedimentation in the Al Batha system appears to be primarily controlled by the strong climatic and geomorphic forcing parameters (i.e. semi-arid environment with ephemeral, mountainous rivers subjected to flash-flooding).  相似文献   

12.
《Sedimentary Geology》1999,123(1-2):81-102
In strike-slip basins, proximal stratal patterns are a function of displacement on basin-bounding faults. In order to better understand factors that control changes in sedimentary facies and stratal patterns of the northeastern part of the Jinan Basin (Cretaceous), a strike-slip basin, we made a detailed analysis of sedimentary facies, depositional architecture and paleoflows. The sedimentary successions can be grouped into five facies associations representing five depositional environments: (1) facies association FA I (alluvial fan); (2) FA II (small-scale Gilbert-type delta); (3) FA III (large-scale, steep delta slope); (4) FA IV (base of large-scale, steep delta slope and prodelta); and (5) FA V (lacustrine plain). The successions are divided into two distinct sedimentary fills on the basis of facies associations, depositional architecture and paleocurrents: (1) marginal fill and (2) longitudinal fill. The marginal fill (ca. 3.2 km thick) is present along the strike-slip basin-bounding fault. The lower part of the marginal fill (ca. 1.3 km thick) consists of alluvial-fan deposits (FA I) along the bounding fault which are transitional northward to small-scale Gilbert-type delta (FA II) and lacustrine plain (FA V) deposits. The upper part of the marginal fill (ca. 1.9 km thick) contains large-scale, steep delta slope (FA III) and base of delta slope/prodelta (FA IV) deposits accompanied with a northward change in facies associations. In the marginal fill, the successive alluvial fan, small-scale Gilbert-type delta and large-scale, steep delta/prodelta deposits are overlapped (shingled) northeastward. The longitudinal fill (ca. 2 km thick) is characterized by eastward overlapped stacks of large-scale, steep delta slope (FA III) and base of delta slope/prodelta (FA IV) deposits with a westward progradation. The longitudinal fill was overstepped by the marginal fill. The northeastward shingled geometry of the marginal fill was most likely caused by sinistral strike-slip displacements on the basin-bounding fault. The slightly oblique (northward) progradation of the marginal fill was due to the northward basin-floor tilting. In the marginal fill, the progressive changes in facies and depositional architecture from the lower alluvial fan/small-scale Gilbert-type delta to the upper large-scale, steep delta/prodelta are suggestive of increase in basin subsidence along the strike-slip basin margin that was closely related to the variation in displacement on the basin-bounding fault. The sinistral strike-slip movements on the bounding fault also caused the eastward overlapping of the longitudinal fill.  相似文献   

13.
Abstract The Kyokpori Formation (Cretaceous), south‐west Korea, represents a small‐scale lacustrine strike‐slip basin and consists of an ≈ 290 m thick siliciclastic succession with abundant volcaniclasts. The succession can be organized into eight facies associations representing distinctive depositional environments: (I) subaqueous talus; (II) delta plain; (III) steep‐gradient large‐scale delta slope; (IV) base of delta slope to prodelta; (V) small‐scale nested Gilbert‐type delta; (VI) small‐scale delta‐lobe system; (VII) subaqueous fan; and (VIII) basin plain. Facies associations I, III and IV together constitute a large‐scale steep‐sloped delta system. Correlation of the sedimentary succession indicates that the formation comprises two depositional sequences: the lower coarsening‐ to fining‐upward succession (up to 215 m thick) and the upper fining‐upward succession (up to 75 m thick). Based on facies distribution, architecture and correlation of depositional sequences, three stages of basin evolution are reconstructed. Stage 1 is represented by thick coarse‐grained deposits in the lower succession that form subaqueous breccia talus and steep‐sloped gravelly delta systems along the northern and southern basin margins, respectively, and a sandy subaqueous fan system inside the basin, abutting against a basement high. This asymmetric facies distribution suggests a half‐graben structure for the basin, and the thick accumulation of coarse‐grained deposits most likely reflects rapid subsidence of the basin floor during the transtensional opening of the basin. Stage 2 is marked by sandy black shale deposits in the upper part of the lower succession. The black shale is readily correlated across the basin margins, indicating a basinwide transgression probably resulting from large‐scale dip slip suppressing the lateral slip component on basin‐bounding faults. Stage 3 is characterized by gravelly delta‐lobe deposits in the upper succession that are smaller in dimension and located more basinward than the deposits of marginal systems of the lower succession. This lakeward shift of depocentre suggests a loss of accommodation in the basin margins and quiescence of fault movements. This basin evolution model suggests that the rate of dip‐slip displacement on basin‐margin faults can be regarded as the prime control for determining stacking patterns of such basin fills. The resultant basinwide fining‐upward sequences deviate from the coarsening‐upward cycles of other transtensional basins and reveal the variety of stratigraphic architecture in strike‐slip basins controlled by the changes in relative sense and magnitude of fault movements at the basin margins.  相似文献   

14.
Evolving turbidite systems on a deforming basin floor, Tabernas, SE Spain   总被引：2，自引：0，他引：2  
The Tabernas‐Sorbas basin was a narrow, east‐west trending, marine trough of Late Miocene age. Sediment gravity flow deposits dominate the basin fill and provide a record of changing bathymetry in response to tectonically induced sea bed deformation. A reanalysis of the western end of the basin in the vicinity of Tabernas establishes an upward evolution involving: (1) sand‐starved marls that were incised by axial channels recording a period of bypass, during which sand deposition took place in a depocentre further to the east; (2) punctuated infilling of the incisions, locally by high‐sinuosity embedded channels. Channel filling is related to a gradient reduction, which presaged collapse of the axial slope as the depocentre began to migrate westwards into the Tabernas area; (3) draping of the earlier incision fills by laterally extensive sheet turbidites, which were initially contained in structurally controlled depressions. These ‘deeps’ opened up as active faults propagated through the former axial slope. Flow containment is inferred on account of the unusual structure of the sheet sandstone beds, complex palaeoflow relationships and thick mudstone caps; (4) fault‐controlled topography was subsequently healed, and further sheet turbidites showing evidence of longer range containment and progressive slope onlap were emplaced. These record mixed supply from both seismically trigged ‘axial’ failures and a reactivated, fault‐controlled slope building out from the northern margin of the basin. Flows traversing the trough floor were strongly reflected off slopes marking the southern limit of the basin. The studied succession is capped by (5) the Gordo megabed event, a large, probably seismically triggered, failure which blanketed the basin floor, demonstrating an enlarged but still contained basin now devoid of significant intrabasinal fault topography. Tectonics played a key role in driving the evolution of the turbidite systems in this basin. Deformation of the basin floor had an important impact on gradients, slope stability, bathymetry and the ability of flows to bypass along the trough axis. Westward migration of the depocentre into the Tabernas area led to a change from incision and bypass to conduit backfilling to flow containment, as fault‐induced subsidence generated a ‘sump’, which trapped flows moving along the basin axis.  相似文献   

15.
以珠江口盆地白云凹陷钻井、测井、地震和古生物资料为基础,结合前人研究成果,系统的分析了白云凹陷晚渐新统到早中新统沉积相发育特征及凹陷沉积充填演化过程。研究结果表明,珠海组下部发育大型陆架边缘三角洲沉积,地震反射特征表明该三角洲发育三期;钻遇水下分支河道、支流间湾、河口坝及远砂坝微相,沉积物以富砂为特征,发育冲刷-充填构造、递变层理及较粗的水平潜穴等多种构造;珠海组上部为浅海相,沉积物以海相砂泥岩互层为主,此时期陆架坡折带位于白云凹陷南坡;珠江组沉积时期,海平面升降旋回频繁,陆架坡折带迁至凹陷北坡。随着古珠江流域扩大,沉积物输入量增加,在珠江组下部发育了深水扇,沉积物以细-粗砂岩为主,夹少量粉砂岩及深海泥岩,发育颗粒流、液化流、浊流及碎屑流等四种主要的重力流,钻遇内扇水道,中扇废弃水道及水道间漫溢沉积,外扇深海泥沉积;珠江组上部为半深海相,沉积物以深海泥岩为主。   相似文献   

16.
The Salvan‐Dorénaz Basin formed during the Late Palaeozoic within the Aiguilles‐Rouges crystalline basement (Western Alps) as an asymmetric, intramontane graben elongated in a NE–SW direction and bounded by active faults. At least 1700 m of fluvial, alluvial fan and volcanic deposits provide evidence for a strong tectonic influence on deposition with long‐term, average subsidence rates of > 0·2 mm yr?1. The early basin fill was associated with coarse‐grained alluvial fans that were dominated by braided channels (unit I). These issued from the south‐western margin of the basin. The fans then retreated to a marginal position and were overlain by muddy floodplain deposits of an anastomosed fluvial system (unit II) that drained towards the NE. Deposition of thick muds resulted from a reduction in the axial fluvial gradient caused by accelerated tectonic subsidence. Overlying sand‐rich meandering river deposits (unit III) document a reversal in the drainage direction from the NE to the SW caused by synsedimentary tectonism, reflecting large‐scale topographic reorganization in this part of the Variscides with subsidence now preferentially in the W and SW and uplift in the E and NE. Coarse‐grained alluvial fan deposits (unit IV) repeatedly prograded into, and retreated from, the basin as documented by coarsening‐upward cycles tens of metres thick reflecting smaller scale tectonic cycles. Volcanism was active throughout the evolution of the basin, and U/Pb isotopic dating of the volcanic deposits restricts the time of basin development to the Late Carboniferous (308–295 Ma). 40Ar/39Ar ages of detrital white mica indicate rapid tectonic movements and exhumation of the nearby basement. In unit I, youngest ages are close to that of the host sediment, but the age spectrum is wide. In unit II, high subsidence and/or sedimentation rates coincide with very narrow age spectra, indicating small, homogeneous catchment areas. In unit III, age spectra became wider again and indicate growing catchment areas.  相似文献   

17.
Exceptional exposures of Permian basin floor fans (fans 3, 4) and a slope fan (fan 5) in the Tanqua Karoo foreland basin of South Africa have enabled an investigation of the relation between the pinch-out geometries and fan architecture. The pinch-out geometry of fan 3 is characterized by the down dip transition from thin to medium bedded sheet deposits to pinch-out fingers, which are overlain by younger prograding sheet deposits. This geometry reflects the progradational stacking pattern of the fan. In contrast, the fan 4 pinch-out fingers consist of stacked channel fills in the same conduit. This pinch-out configuration relates to the dominant aggradational style observed on the mid and distal parts of fan 4. Fan 5 represents a slope fan comprising an axial channel conduit, which branches down slope into three distributary channels. The distal fan is characterized by larger channel fills, which may represent bypass channels to other basin floor fans. The very thick-bedded nature of the youngest channel fill unit suggests early bypass followed by retrogradation as indicated by the presence of thinner bedded heterolithic channel fill deposits along the axial conduit. Although some of the massive pinch-out channels exhibit basal scour, their depositional morphology suggests that they mainly originated due to the infill of subtle topographic depressions by low concentration turbidity currents. Instead of describing these features as channel fills, the use of the term pinch-out fingers is preferred.  相似文献   

18.
ABSTRACT Three transitional submarine fan environments are recognized in the late Precambrian, 3-2 km thick Kongsfjord Formation in NE Finnmark, North Norway, namely: (1) middle to outer fan; (2) fan lateral margin, and (3) fan to upper basin-slope deposits. Middle to outer fan deposits have a high proportion of sandstones, typically showing Bouma T bede with T a in the thicker beds. Deposition was mainly from sheet flows with rare shallow channels. Middle to outer fan deposits are an association of sandstone packets less than 10 m thick but commonly only a few metres thick, interpreted as channels or lobes. Interchannel and fan fringe deposits occur as discrete packets of beds between the thicker bedded and coarser grained channel or lobe deposits. Fan lateral margin deposits are recognized on the basis of their stratigraphic position adjacent to inner/middle fan deposits. They are characterized by: (a) a relatively high proportion of fine-grained sandstone/siltstone turbidites compared to other major fan environments; (b) relatively small channels oriented at various angles to the regional basin slope; (c) lobes associated with channels, and (d) abundant clastic dykes and other soft-sediment deformation. Fan lateral margin deposits are distinguished from the outer fan/basin plain successions on account of the very high proportion of siltstone turbidites comparable with middle fan inter-channel deposits. Fan to upper basin-slope deposits occur at the top of the formation as an alternation of sandstone turbidites, most of which are laterally discontinuous, and very thin-bedded upper basin-slope siltstones with slide deposits.  相似文献   

19.
The Anvil Spring Canyon fan of the Panamint Range piedmont in central Death Valley was built entirely by water-flow processes, as revealed by an analysis of widespread 2- to 12-m-high stratigraphic cuts spanning the 9·7 km radial length of this 2·5–5·0° sloping fan. Two facies deposited from fan sheetfloods dominate the fan from apex to toe. The main one (60–95% of cuts) consists of sandy, granular, fine to medium pebble gravel that regularly and sharply alternates with cobbly coarse to very coarse pebble gravel in planar couplets 5–25 cm thick oriented parallel to the fan surface. The other facies (0–25% of cuts) comprises 10- to 60-cm-thick, wedge-planar and wedge-trough beds of pebbly sand and sandy pebble gravel in backsets sloping 3–28°. Both facies are interpreted as resulting from rare, sediment-charged flash floods from the catchment, and were deposited by supercritical standing waves of expanding sheetfloods on the fan. Standing waves were repeatedly initiated, enlarged, migrated, and then terminated either by gradually rejoining the flood or by more violent breakage and washout. The frequent autocyclic growth and destruction of standing waves during an individual sheetflood resulted in the deposition of multiple coarse and fine couplet and backset sequences 50–250 cm thick across the active depositional lobe of the fan. Erosional intensity during washout of the standing wave determined whether early-phase backset-bed deposits or washout-phase sheetflood couplet deposits were selectively preserved in a given cycle. Two minor facies are also found in the Anvil fan. Pebble–cobble gravel lags (0–20% of cuts) are present above erosional scours into the sheetflood couplet and backset deposits. They consist of coarse gravel concentrated through fine-fraction winnowing of the host sheetflood facies by sediment-deficient water flows. This reworking occurred during recessional flood stage or from non-catastrophic discharge during the long intervals between major flash floods. This facies is common at the surface, giving rise to a ‘braided-stream’ appearance. However, it is stratigraphically limited, present as thin, continuous to discontinuous beds or lenses that bound 50- to 250-cm-thick sheetflood sequences. The other minor facies of the Anvil fan consists of clast-supported and imbricated, thickly stratified, pebbly, cobbly, boulder gravel present in narrow, radially aligned ribbons nested within sheetflood deposits. This facies is interpreted as representing deposition in the incised channel of the fan, a subenvironment characterized by greater flow competence resulting from maintained depth from channel-wall confinement, and by more frequent water flows and winnowing events caused by its direct connection with the catchment feeder channel.  相似文献   

20.
Several Holocene turbidites can be correlated across much of Navy Fan through more than 100 sediment core localities. The uppermost muddy turbidite unit is mapped throughout the northern half of the fan; its volume, grain-size distribution and the maximum height of deposition on the basin slopes are known. These parameters can be related to the precise channel morphology and mesotopography revealed by deep-tow surveys. Thus there is sufficient information to estimate detailed flow characteristics for this turbidity current as it moved from fan valley to distal basin plain. On the upper fan, the gradient and the increasing downstream width of the channel and only limited flow overspill suggest that the flow had a Froude number close to 1.0. The sediment associated with the channel indicates friction velocities of about 0.06 m s?1 and flow velocities of about 0.75 m s?1. Using this flow velocity and channel dimensions, sediment concentration (～2×10?3) and discharge are estimated, and from a knowledge of the total volume of sediment deposited, the flow duration is estimated to be from 2 to 9 days. It is shown that the estimates of Froude number, drag coefficient, and sediment concentration are not likely to vary by more than a factor of 2. On the mid-fan, the flow was much thicker than the height of the surface relief of the fan and it spread rapidly. The cross-flow slope, determined from the horizontal extent of turbidite sediment, is used to estimate flow velocity, which is confirmed by consideration of both sediment grain size and rate of deposition. This again allows sediment concentration and discharge to be estimated. The requirements of flow continuity, entrainment of water during flow expansion, and observed sediment deposition provide checks on all these estimates, and provide an integrated picture of the evolution of the flow. The flow characteristics of this muddy turbidity current are well constrained compared to those for more sand-rich late Pleistocene and early Holocene turbidity currents on the fan.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号