首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
程雪苹  林机  韩平 《海洋学报》2010,32(10):6752-6756
将直接微扰方法应用于含微扰的三维非线性Schrdinger方程,获得了该方程的包括零阶和一阶修正的近似解析解.借助得到的解析解,分析了微扰对孤子参数的影响.  相似文献   

2.
宋婷婷  何捷  林理彬  陈军 《海洋学报》2010,32(9):6480-6486
本文利用第一性原理方法研究了金红石相和单斜相VO2晶体的电子结构和热力学性质.在计算中采用局域密度近似结合Hubbard U模型(LDA+U)描述电子的局域强关联效应,同时也利用微扰密度泛函方法计算了两种相结构的声子谱.计算结果表明V原子3d电子轨道中x2-y2轨道能级分裂决定了VO2晶体在不同相结构下的金属和绝缘体特性.零温状态方程计算揭示了在68 GPa时可以发生从单斜结构  相似文献   

3.
为提高Kriging近似模型在船舶结构性能多维度响应预测方面的适用性,对常规Kriging近似模型进行分区间泛化改进:一是对设计样本点的各个维度(分量)进行划区,并在每一个分区间内采用最优拉丁超立方(OLhd)取样;二是引入比例系数w1组合高斯与指数型相关函数提高模型对数据的泛化能力,从而在每个划分的区间内建立泛化的Kriging近似模型。通过SCH测试函数,验证了构造的分区间泛化Kriging模型有效性。结合参数化建模和改进Kriging近似模型对某过渡肘板和舱口角隅边界进行形状优化,优化第一阶段由改进的近似模型通过多岛遗传算法得到全局初步的最优解,第二阶段在初步解的基础上缩小优化变量范围,由少量的FEM计算即可在小范围内搜寻到精确的最优设计变量。结果表明:分区间泛化Kriging近似模型在预测多维度响应时较常规Kriging模型预测精度更高;分阶段的形状优化流程在保证极小误差和缩小计算成本的情况下能够得到理想的应力分布和重量优化结果,有助于船舶结构的轻量化研究。  相似文献   

4.
在非传统近似(即,包含地转水平分量在内的完整地转效应)条件下,用 WKB(Wentzel-Kramers-Brillouin)方法得到了密度连续分层海洋内波的一类 WKB近似解.为了检验所得到的 WKB 近似解的有效性,对WKB解各垂向速度模态与基于三点中心差分格式及QR算法的数值计算结果进行了详细比对,结果表明,当浮...  相似文献   

5.
应变Si电子电导有效质量模型   总被引:1,自引:0,他引:1  
采用K \5P微扰法建立了应变Si导带能谷由纵、横向有效质量表征的E-k关系,并在此基础上,研究分析了(001),(101),(111)晶面应变Si电子的电导有效质量与应力、能谷分裂能及晶向的关系.结果表明,弛豫Si1-xGex材料(001)面生长的应变Si沿[100],[010]晶向的电子电导有效质量和弛豫Si1-xGex材料(101)面生长的应变  相似文献   

6.
在遥感研究中,微分散射截面是1个重要的参数.针对相对折射率趋近于1的均匀球形粒子,在Born近似条件下求解出粒子的散射振幅函数和微分散射截面,通过与Mie散射理论结果的比较,对Born近似的适用范围进行了讨论,提出相对折射率处于[1.01,1.09]之间的散射粒子近似解适用的范围.  相似文献   

7.
柏江湘  米贤武  李德俊 《海洋学报》2010,32(9):6205-6212
用一种全量子理论方法研究了波导、光学微盘腔与三能级量子点耦合系统的动力学过程,求出其耦合后的透射模和反射模的解析解. 由于微腔表面粗糙引起反向散射,在微腔内形成两简并回音壁耦合共振模,其耦合率为β;量子点的两激发态分别以耦合率g1,g2与回音壁耦合共振模产生耦合. 在实数空间里,得出透射光谱和反射光谱的数值解,这些三能级模型结果比二能级模型结果更接近真实光学微盘腔系统,能更好地显示耦合系统的动力学特性.  相似文献   

8.
给出有限深水斯托克斯波的一种新的近似解法,得到了与经典三阶斯托克斯波不同弥散关系。并与Skejelbreia和Tadjbakhshd&Keller的经典斯托克斯波的结果进行比较,发现在Kd较小处,差别比较明显。指出,它对精确确定斯托克斯波解,特别是确定高阶斯托克斯波的表达形式有重要的应用价值。  相似文献   

9.
薛敬宏  金铭  乔晓林 《海洋技术学报》2006,25(1):115-118,123
声相关海流剖面仪(ACCP)适合深海测速,能够测得相对海底的绝对速度。文章在前人工作基础上,以声纳方程为基础,构造海底混响回波仿真模型,并对基于K irchhoff近似和利用微扰法的R ay le igh-R ice近似相结合的散射模型赋予新的物理意义,并将其应用到声相关测速仿真研究过程中,使仿真更加接近于海洋的实际环境。文章利用H ilbert变换进行包络检波来减小测速误差,并且根据接收信噪比得到了不同航速时能够达到最大底跟踪的距离,这与参考文献给出的结果是一致的。  相似文献   

10.
陈东猛 《海洋学报》2010,32(9):6399-6404
应用计及五阶近邻的力常数模型,研究了单轴应力下的石墨烯和芳香烃分子三明治型贴层的石墨烯中拉曼谱的G峰劈裂.计算结果表明对称性的降低解除了G峰对应的在Γ点的面内的纵波光学模声子和横波光学模声子能量简并,从而G峰劈裂为G+和G- 两个峰.在单轴应力作用下,C—C键的伸长致使力常数减小,软化了面内的光学模声子,导致两个G峰都红移;芳香烃分子对石墨烯产生的沿分子长短边方向不同的应力作用,使得G峰对应的两支光学模声子的频率一支发生蓝移,而另一支发生红移.这  相似文献   

11.
Using a proper approximation scheme to the centrifugal term, we study any l-wave continuum states of the Schrõdinger equation for the modified Morse potential. The normalised analytical radial wave functions are presented, and a corresponding calculation formula of phase shifts is derived. It is shown that the energy levels of the continuum states reduce to those of the bound states at the poles of the scattering amplitude. Some numerical results are calculated to show the accuracy of our results.  相似文献   

12.
A numerical model describing the propagation and run-up process of nearshore tsunamis in the vicinity of shorelines is developed based on an approximate Riemann solver. The governing equations of the model are the nonlinear shallow-water equations. The governing equations are discretized explicitly by using a finite volume method. The nonlinear terms in the momentum equations are solved with the Harten-Lax-van Leer-Contact (HLLC) approximate Riemann solver. The developed model is first applied to prediction of water motions in a parabolic basin, and propagation and subsequent run-up process of nearshore tsunamis around a circular island. Computed results are then compared with available analytical solutions and laboratory measurements. Very reasonable agreements are observed.  相似文献   

13.
针对多波束常梯度声线跟踪计算耗时和声速剖面简化导致计算精度下降的问题,在对多波束常梯度声线跟踪理论进行分析的基础上,提出了一种基于时间分解的常梯度声线跟踪方法。将波束在层内的传播时间分解为与波束入射角无关的固定项和有关的变化项,固定项对于每个声速剖面仅需计算一次,对变化项采用麦克劳林公式展开得到其一阶近似,简化了层内传播时间和水平位移的计算;同时仅对变化项应用简化的声速剖面,降低剩余传播时间计算误差。实验结果证明当波束角小于50°、层间距小于50 m或上下层声速差小于20 m/s时,近似模型与常梯度算法精度相当,时间分解法在声速剖面层间距增大时能显著提高声线跟踪的精度。  相似文献   

14.
In this paper, the generalised two-dimensional differential transform method (DTM) of solving the time-fractional coupled KdV equations is proposed. The fractional derivative is described in the Caputo sense. The presented method is a numerical method based on the generalised Taylor series expansion which constructs an analytical solution in the form of a polynomial. An illustrative example shows that the generalised two-dimensional DTM is effective for the coupled equations.  相似文献   

15.
缓波型立管由于设计参数较多且优化目标之间相互影响,设计结果具有很大的不确定性。随着代理模型和智能优化算法的发展,针对缓波型立管的优化可以提出更好的解决方案。以提高力学性能和经济效益为优化目标,采用基于Kriging插值模型和NSGA-II算法的多目标优化策略,对考虑顶部浮体影响的深水缓波型立管进行动力响应分析,并开展线型—截面双目标优化集成设计和线型—浮筒三目标优化集成设计。将处于不同几何尺度的设计变量进行集成,旨在各目标存在相互竞争的情况下,与截面、浮筒设计形成有效互动以提高线型设计的总体性能。结果表明,Pareto最优解集可提供多个选择方案,以满足工程实际需要。将所选最优方案与初始设计进行对比,并以疲劳性能和成本估算作为优化的校核指标,取得了理想的优化效果。  相似文献   

16.
This study aims to develop a robust, accurate and computationally efficient hydrodynamic and sediment transport model for dam break flows. The two dimensional shallow water equations are resolved based on the finite volume method with an unstructured quadtree mesh. The sediment transport and bed evolution modules are coupled with hydrodynamic module to predict simultaneously the hydrodynamics, sediment concentrations and morphological changes. The interface flux is computed by the HLL approximate Riemann solver with second order accuracy. The effects of pressure and gravity are included in source term in this model, which can simplify the computation and eliminate numerical imbalance between source and flux terms. For dam break flows occurring in complicated geometries, the quadtree rectangular mesh is used to refine the interesting area and important part. The model is first verified against results from laboratory experiments, existing numerical models and real life case. It is then used to simulate dam break flows over a mobile bed to investigate the bed evolution. The results are compared with experimental data and field data with good agreement. The method is simple, efficient, and conservative. It shows promise for handling hydrodynamic simulation and sediment transport for a wide range of dam break flows.  相似文献   

17.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明:土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。  相似文献   

18.
19.
20.
A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria ( 〉 99% ), but also between polar marine bacteria and bacteria from other aquatic environments ( ≥ 98.8% ), including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号