首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Microthermometric analyses of fluid inclusions on a suite of hydrothermally altered gabbros recovered just south of the eastern intersection of the Kane Fracture Zone and the Mid-Atlantic Ridge, record the highest homogenization temperatures yet reported for mid-ocean ridge hydrothermal systems. Fluid salinities in the high temperature inclusions are more than ten times that of seawater. Multiple generations of fluid inclusions entrapped along healed microfractures exhibit three distinct temperature-compositional groups. We interpret these populations as having been trapped during three separate fracturing events.The earliest episode of brittle failure in the gabbros is represented by coplanar, conjugate vapor-dominated and brine-dominated fluid inclusion arrays in primary apatite. Vapor-dominated inclusions exhibit apparent homogenization temperatures of 400°C and contain equivalent salinities of 1–2 wt.% NaCl. These inclusions are interspersed with liquid-dominated, sulfide-bearing inclusions containing salinities of 50 wt.% NaCl equivalent. These high salinity inclusions remain unhomogenized at temperatures greater than 700°C.Compositional and phase relationships of the fluid inclusions may be accounted for by two-phase separation of a fluid under 1000–1200 bars pressure. These pressures require that fluid entrapment occurred under a significant lithostatic component and indicate a minimum entrapmentdepth of 2 km below the axial valley floor. This depth corresponds to a minimum tectonic uplift of 3 km, in order to emplace the samples at the 3100 m recovery depth. The microfracture networks within magmatic apatites represent fluid flow paths for either highly modified, deeply penetrating seawater or a late stage magmatic aqueous fluid. The inclusions may have formed close to the brittle-ductile transition zone adjacent to an active magma chamber.Following collapse of the high temperature front, lower temperature fluids of definite seawater origin circulated through the open fracture networks, pervasively altering portions of the gabbros. This stage is represented by low-to-moderate (1–7 wt.% NaCl equivalent) salinity inclusions in plagioclase, apatite, epidote, and augite, which homogenize at temperatures of approximately 200–300°C and 400°C. Formation of hydrous mineral assemblages, under greenschist to lower amphibolite facies conditions, resulted in sealing of the vein system and may have resulted in modification of seawater salinities by as much as a factor of two. During or following these later stages of hydrothermal activity the gabbros were emplaced high on the axial walls by differential uplift attending formation of the flanking mountains.  相似文献   

2.
The deep well MV5A, drilled in the western part of the Larderello geothermal field, crossed a 20-cm-thick hydraulic fracture breccia unit at a depth of 1090 m below ground level (b.g.l.). This breccia occurs in a fine-grained Triassic metasandstone and consists of angular to subangular clasts of up to some centimeters in size. Pervasive alteration has affected the breccia clasts and wall rock around the breccia, with the formation of Mg–Fe chlorite. After such alteration, hydrothermal circulation caused the precipitation of two generations of calcite cement. Then, ankerite partially replaced these two calcite generations. Ankerite also precipitated in late veinlets with chlorite. Late hydrothermal activity led to the crystallization of albite, quartz and finally, anhydrite. The calcite contains vapor-rich inclusions and two populations of liquid-rich (L1 and L2) inclusions. L1 inclusions are characterized by homogenization temperatures between 304 and 361°C and salinities from 7.4 to 11.6 wt.% NaCl equivalent; L2 inclusions revealed homogenization temperatures in the range of 189–245°C and salinities from 2.6 to 6.3 wt.% NaCl equivalent. The fluids contained in L2 inclusions were probably trapped coevally with some vapor-rich inclusions under boiling conditions after the L1 inclusions formed. Some of the abundant vapor-rich inclusions in calcite may also represent early, low-temperature inclusions affected by decrepitation and/or stretching and/or leaking during L1 trapping. The liquid-rich (L) inclusions trapped at later stages in ankerite, albite and anhydrite display, respectively, homogenization temperature ranges of 189–198°C, 132–145°C, and 139–171°C, and salinities ranging from 1.6 to 1.7 wt.% NaCl equivalent, 1.4 to 2.1 wt.% NaCl equivalent and 3.7 to 6.2 wt.% NaCl equivalent. The inclusions studied record the evolution, over time, of the fluids flowing in the breccia level: L1 inclusions capture high-temperature fluid (about 300 to 350°C) of high salinity (around 10 wt.% NaCl equivalent) at above-hydrostatic pressures (up to about 150 bar). The L2 inclusions in calcite and liquid-rich inclusions in ankerite and albite represent subsequent hydrothermal fluid evolution toward lower temperatures (about 250 to 130°C), pressures (45 to a few bar) and salinities (6.3 to 1.4 wt.% NaCl equivalent). During this stage, boiling processes and infiltration of meteoric waters probably occurred. Finally, moderately saline fluids (around 5 wt.% NaCl equivalent) at a temperature (about 160°C) close to that of present-day in-hole measurements was trapped in the anhydrite inclusions. The liquids trapped in liquid-rich inclusions circulated at 41,000 years (maximum age of calcite) or later. This age represents an upper limit for the development of vapor-dominated condition, in this part of the geothermal system. The fluids circulating at the breccia level were probably meteoric and/or connate waters. These fluids may have interacted with the anhydrite and carbonate bearing formations present in the Larderello area. The occurrence of the hot and saline fluids, trapped in L1 inclusions at above-hydrostatic pressure, suggests that similar fluids but with higher pressure (≥167 bar) and temperature (≥360°C) may have been responsible for rock fracturing.  相似文献   

3.
Fluid inclusion studies have been used to derive a model for fluid evolution in the Hohi geothermal area, Japan. Six types of fluid inclusions are found in quartz obtained from the drill core of DW-5 hole. They are: (I) primary liquid-rich with evidence of boiling; (II) primary liquid-rich without evidence of boiling; (III) primary vapor-rich (assumed to have been formed by boiling); (IV) secondary liquid-rich with evidence of boiling; (V) secondary liquid-rich without evidence of boiling; (VI) secondary vapor-rich (assumed to have been formed by boiling). Homogenization temperatures (Th) range between 196 and 347°C and the final melting point of ice (Tm) between −0.2 and −4.3°C. The CO2 content was estimated semiquantitatively to be between 0 and 0.39 wt. % based on the bubble behavior on crushing. NaCl equivalent solid solute salinity of fluid inclusions was determined as being between 0 and 6.8 wt. % after minor correction for CO2 content.Fluid inclusions in quartz provide a record of geothermal activity of early boiling and later cooling. The CO2 contents and homogenization temperatures of fluid inclusions with evidence of boiling generally increase with depth; these changes, and NaCl equivalent solid solute salinity of the fluid can be explained by an adiabatic boiling model for a CO2-bearing low-salinity fluid. Some high-salinity inclusions without CO2 are presumed to have formed by a local boiling process due to a temperature increase or a pressure decrease. The liquid-rich primary and secondary inclusions without evidence of boiling formed during the cooling process. The salinity and CO2 content of these inclusions are lower than those in the boiling fluid at the early stage, probably as a result of admixture with groundwater.  相似文献   

4.
The Platanares geothermal area in western Honduras consists of more than 100 hot springs that issue from numerous hot-spring groups along the banks or within the streambed of the Quebrada de Agua Caliente (brook of hot water). Evaluation of this geothermal area included drilling a 650-m deep PLTG-1 drill hole which penetrated a surface mantling of stream terrace deposits, about 550 m of Tertiary andesitic lava flows, and Cretaceous to lower Tertiary sedimentary rocks in the lower 90 m of the drill core.Fractures and cavities in the drill core are partly to completely filled by hydrothermal minerals that include quartz, kaolinite, mixed-layer illite-smectite, barite, fluorite, chlorite, calcite, laumontite, biotite, hematite, marcasite, pyrite, arsenopyrite, stibnite, and sphalerite; the most common open-space fillings are calcite and quartz. Biotite from 138.9-m depth, dated at 37.41 Ma by replicate 40Ar/39 Ar analyses using a continuous laser system, is the earliest hydrothermal mineral deposited in the PLTG-1 drill core. This mid-Tertiary age indicates that at least some of the hydrothermal alteration encountered in the PLTG-1 drill core occured in the distant past and is unrelated to the present geothermal system. Furthermore, homogenization temperatures (Th) and melting-point temperatures (Tm) for fluid inclusions in two of the later-formed hydrothermal minerals, calcite and barite, suggest that the temperatures and concentration of dissolved solids of the fluids present at the time these fluid inclusions formed were very different from the present temperatures and fluid chemistry measured in the drill hole.Liquid-rich secondary fluid inclusions in barite and caicite from drill hole PLTG-1 have Th values that range from about 20°C less than the present measured temperature curve at 590.1-m depth to as much as 90°C higher than the temperature curve at 46.75-m depth. Many of the barite Th measurements (ranging between 114° and 265°C) plot above the reference surface boiling-point curve for pure water assuming hydrostatic conditions; however, the absence of evidence for boiling in the fluid inclusions indicates that at the time the minerals formed, the ground surface must have been at least 80 m higher than at present and underwent stream erosion to the current elevation. Near-surface mixed-layer illite-smectite is closely associated with barite and appears to have formed at about the same temperature range (about 120° to 200°C) as the fluid-inclusion Thvalues for barite. Fluid-inclusion Th values for calcite range between about 136° and 213°C. Several of the calcite Th values are significantly lower than the present measured temperature curve. The melting-point temperatures (Tm) of fluid-inclusion ice yield calculated salinities, ranging from near zero to as much as 5.4 wt. % NaCl equivalent, which suggest that much of the barite and calcite precipitated from fluids of significantly greater salinity than the present low salinity Platanares hot-spring water or water produced from the drill hole.  相似文献   

5.
Silica chimneys were discovered in 1985 at 86°W in the rift valley of the Galapagos Spreading Center at 2600 m depth (“Cauliflower Garden”). The inactive chimneys lack any sulfides and consist almost entirely of amorphous silica (up to 96 wt.% SiO2, opal-A); Fe and Mn oxides are minor constituents. Oxygen isotope data show that formation of the silica chimneys took place at temperatures between 32°C (+29.9‰ δ18O) and 42°C (+27.8‰ δ18O).Th/Udating reveals a maximum age of 1440 ± 300y. Amorphous silica solubility relations indicate that the silica chimneys were formed by conductive cooling of pure hydrothermal fluids or by conductive cooling of a fluid/seawater mixture. Assuming equilibrium with quartz at 500 bars, initial fluid temperatures of more than 175°C (i.e., a concentration of > 182 ppm SiO2) were required to achieve sufficient supersaturation for the deposition of amorphous silica at 40°C and 260 bars. If the silica chimneys originate from the same or a similar fluid as higher-temperature ( < 300°C) sulfide-silica precipitates found nearby (i.e., 2.5 km away), then subsurface deposition of sulfides may have occurred.  相似文献   

6.
To test the possible effect of different fluid compositions on some standard geothermometry techniques, experiments were conducted in which a rhyolite from the Presidio Bolson area of West Texas was interacted with fluids of two different compositions (0.1 M NaCl and 0.01 M NaHCO3). The temperature range was 100–500°C, pressure was 1000 bars, water/rock mass ratios were 6:1 and 5:1, and the duration of the experiments ranged from 12 to 130 days.Results showed that the quartz geothermometer worked well in the experimental system up to temperatures of 400°C. The results were not affected by differences in the major anionic species.The Na-K geothermometer gave temperatures an average of 76°C lower than the experimental temperatures, regardless of fluid type. The experimental data from this study agree well with previous experimental work in feldsparquartz systems.The Na-K-Ca geothermometer did not work well for experiments using 0.01 M NaHCO3 but did work well for experiments using 0.1 M NaCl. Benjamin et al. (1983) concluded that the Na-K-Ca geothermometer is based on alteration reactions rather than feldspar exchange; however, no evidence for alteration reactions was observed in this study.  相似文献   

7.
Measurements of the temperature and composition of effluent from vents on the sea floor can be used to deduce the in-situ density of this fluid, which is required for calculations of flow in the chimneys and through their porous walls. This density is, however, not directly relevant when calculating the buoyancy flux in the plume above a smoker. It is the asymptotic buoyancy flux, following extensive dilution with seawater, which is required when estimating the height of rise of plumes in a stably stratified ocean, and when calculating the criterion for reversal of buoyancy due to non-linear mixing effects. The results of mixing calculations show that the effluent from hydrothermal vents on the sea floor will exhibit reversing buoyancy if the ejected fluid has a temperature of 300°C and a salinity greater than 8 wt.% NaCl. If the temperature of the effluent is 200°C the salinity required for reversing buoyancy falls to 5.5 wt.% NaCl. Measurements of temperature and salinities of sea-floor hydrothermal fluid suggest that fluids with the characteristics required to form reversing plumes are ejected at the sea floor. The possibility that reversing plumes may be found has important implications for the formation of massive sulfide deposits.  相似文献   

8.
A dacitic magma (64.5 wt.% SiO2), a mixture of phenocryst-rich rhyodacite and an aphyric mafic magma, was erupted during the recent 1991–1995 Mount Unzen eruptive cycle. The experimental and analytical results of this study reveal additional details about conditions in the premixing and postmixing magmas, and the nature of the mixing process. The preeruption rhyodacitic magma was at a temperature of 790±20°C according to Fe–Ti oxide phenocryst cores, and at a depth of 6 to 7 km (160 MPa) according to Al-in-hornblende geobarometry. The mafic magma that mixed with the rhyodacite is found as andesitic (54 to 62 wt.% SiO2) enclaves in the erupted magma and was essentially aphyric when intruded. Phase equilibria indicate that an aphyric andesite at 160 MPa is >1030°C (H2O-saturated) and possibly as high as 1130°C (2 wt.% H2O). The composition of the rhyodacite which was mixed with the andesite is estimated to lie between 67 and 69 wt.% SiO2. Using these compositions and temperatures, the temperature of the Unzen magma after mixing is estimated to be at least 850° to 870°C. The groundmass Fe–Ti oxide microphenocrysts and those in pargasite-bearing reaction zones around biotite phenocrysts both give 890±20°C temperatures; the oxide–oxide contacts give temperatures of 910±20°C. The 900±30°C postmixing temperatures are consistent with phase-equilibria experiments which show that the magma was not above 930°C at 160 MPa. Our Fe–Ti oxide reequilibration experiments suggest that the mixing of the two magmas began within a few weeks of the eruption, which is a shorter time than is calculated using available diffusion data. There is also evidence that some mixing took place much closer to the time of extrusion based on the presence of unrimmed biotite phenocrysts in the magma.  相似文献   

9.
Results of drilling, logging, and testing of three exploration core holes, combined with results of geologic and hydrogeochemical investigations, have been used to present a reservoir model of the Platanares geothermal system, Honduras. Geothermal fluids circulate at depths ≥ 1.5 km in a region of active tectonism devoid of Quaternary volcanism. Large, artesian water entries of 160 to 165°C geothermal fluid in two core holes at 625 to 644 m and 460 to 635 m depth have maximum flow rates of roughly 355 and 560 l/min, respectively, which are equivalent to power outputs of about 3.1 and 5.1 MW(thermal). Dilute, alkali-chloride reservoir fluids (TDS ≤ 1200 mg/kg) are produced from fractured Miocene andesite and Cretaceous to Eocene redbeds that are hydrothermally altered. Fracture permeabillity in producing horizons is locally greater than 1500 and bulk porosity is ≤ 6%. A simple, fracture-dominated, volume-impedance model assuming turbulent flow indicates that the calculated reservoir storage capacity of each flowing hole is approximately 9.7 × 106 l/(kg cm−2), Tritium data indicate a mean residence time of 450 yr for water in the reservoir. Multiplying the natural fluid discharge rate by the mean residence time gives an estimated water volume of the Platanares system of ≥ 0.78 km3. Downward continuation of a 139°C/km “conductive” gradient at a depth of 400 m in a third core hole implies that the depth to a 225°C source reservoir (predicted from chemical geothermometers) is at least 1.5 km. Uranium-thorium disequilibrium ages on calcite veins at the surface and in the core holes indicate that the present Platanares hydrothermal system has been active for the last 0.25 m.y.  相似文献   

10.
The Sierra La Primavera, a late Pleistocene rhyolitic caldera complex in Jalisco, México, contains fumaroles and large-discharge 65°C hot springs that are associated with faults related to caldera collapse and to later magma insurgence. The nearly-neutral, sodium bicarbonate, hot springs occur at low elevations at the margins of the complex, whereas the water-rich fumaroles are high and central.The Comisión Federal de Electricidad de México (CFE) has recently drilled two deep holes at the center of the Sierra (PR-1 and Pr-2) and one deep hole at the western margin. Temperatures as high as 285°C were encountered at 1160 m in PR-1, which produced fluids with 820 to 865 mg/kg chloride after flashing to one atmosphere. Nearby, PR-2 encountered temperatures to 307°C at 2000 m and yielded fluids with chloride contents fluctuating between 1100 and 1560 mg/kg after flashing. Neither of the high-temperature wells produced steam in commercial quantities. The well at the western margin of the Sierra produced fluids similar to those from the hot springs. The temperature reached a maximum of 100°C near the surface and decreased to 80°C at 2000 m.Various geothermometers (quartz conductive, Na/K, Na-K-Ca, δ18O(SO4-H2O) and D/H (steam-water) all yield temperatures of 170 ± 20°C when applied to the hot spring waters, suggesting that these spring waters flow from a large shallow reservoir at this temperature. Because the hot springs are much less saline than the fluids recovered in PR-1 and PR-2, the mixed fluid in the shallow reservoir can contain no more than 10–20% deep fluid. This requires that most of the heat is transferred by steam. There is probably a thin vapor-dominated zone in the central part of the Sierra, through which steam and gases are transferred to the overlying shallow reservoir. Fluids from this reservoir cool from 170°C to 65°C by conduction during the 5–7 km of lateral flow to the hot springs.  相似文献   

11.
The thermal history of outcropping Devonian sediments of the northern Appalachian Basin, New York, has been investigated using fission track analysis of detrital apatites from 57 sandstone samples. Based on lengths and apparent age measurements using fission tracks in apatite it is concluded that Lower Devonian sediments presently at the surface in the Catskill region were cooled rapidly from temperatures higher than about 110°C during Early Cretaceous times (120–140 Ma ago). In the western part of New York (Wellsville-Buffalo) data from late Devonian sediments are consistent with cooling at the same time as that identified for the Catskill region but from lower temperatures, in the range of approximately 80–110°C, the maximum temperature these sediments experienced since deposition. For a pre-uplift paleogeothermal gradient of 25–35°C/km, the confined track length data indicates uplift and erosion of 2–3 km for western New York and greater than 3–4 km for the Catskill region, a differential uplift pattern which is consistent with the historical stratigraphic data from the region. This conclusion is at variance with earlier interpretations put forth by others.Rapid broad scale uplift and erosion of the scale identified imply that large volumes of sediment could have been supplied from the northern Appalachian Basin during the Early Cretaceous. This timing for the dominant post-Devonian cooling phase in the basin is not accounted for by recent models of the tectonic evolution of the Appalachian Orogen but is compatible with the change from carbonate to siliciclastic deposition in the Atlantic coastal plain. It is suggested that this style of broad regional uplift without significant deformation is characteristic of a tectonic regime associated with, and subsequent to, continental rifting.Apatite fission track analysis is shown to be a basic tool in providing fundamental limits for thermal history assessment in regional tectonic problems.  相似文献   

12.
Thermal springs associated with normal faults in Utah have been analyzed for major cations and anions, and oxygen and hydrogen isotopes. Springs with measured temperatures averaging greater than 40°C are characterized by Na + K- and SO4 + Cl-rich waters containing 103 to 104 mg/l of dissolved solids. Lower temperature springs, averaging less than 40°C, are more enriched in Ca + Mg relative to Na + K. Chemical variations monitored through time in selected thermal springs are probably produced by mixing with non-thermal waters. During the summer months at times of maximum flow, selected hot springs exhibit their highest temperatures and maximum enrichments in most chemical constituents.Cation ratios and silica concentrations remain relatively constant through time for selected Utah thermal springs assuring the applicability of the geothermometer calculations regardless of the time of year. Geothermometer calculations utilizing either the quartz (no steam loss), chalcedony or Mg-corrected Na/K/Ca methods indicate that most thermal springs in Utah associated with normal faults have subsurface temperatures in the range of 25 to less than 120°C. This temperature range suggests fluid circulation is restricted to depths less than about three kilometers assuming an average thermal gradient of about 40°C/km.Thermodynamic calculations suggest that most thermal springs are oversaturated with respect to calcite, quartz, pyrophyllite, (Fe, Mg)-montmorillonite, microcline and hematite, and undersaturated with respect to anhydrite, gypsum, fluorite and anorthite. Chalcedony and cristobalite appear to be the only phases consistently at or near saturation in most waters. Theoretical evaluation of mixing on mineral saturation trends indicates that anhydrite and calcite become increasingly more undersaturated as cold, dilute groundwater mixes with a hot (150°C), NaCl-rich fluid. The evolution of these thermal waters issuing from faults appears to be one involving the dissolution of silicates such as feldspars and micas by CO2-enriched groundwaters that become more reactive with increasing temperature and/or time. Solution compositions plotted on mineral equilibrium diagrams trend from product phases such as kaolinite or montmorillonite toward reactant phases dominated by alkali feldspars.Isotopic compositions indicate that these springs are of local surface origin, either meteoric (low TDS, < 5000 mg/l) or connate ground water (high TDS, > 5000 mg/l). Deviations from the meteoric water line are the result of rock-water isotopic exchange, mixing or evaporation. Fluid source regions and residence times of selected thermal spring systems (Red Hill, Thermo) have been evaluated through the use of a σ D-contour map of central and western Utah. Ages for waters in these areas range from about 13 years to over 500 years. These estimates are comparable to those made for low-temperature hydrothermal systems in Iceland.  相似文献   

13.
The 29.5 Ma Wah Wah Springs Formation which erupted from the Indian Peak Caldera has an estimated volume of > 3900 km3 making it one of the largest ignimbrites on earth. The magma was calc-alkaline, dacitic (68 wt. % SiO2) and phenocryst-rich (38 vol.%). Phenocrysts include plagioclase (An 47), magnesio-hornblende, Mg-biotite, quartz, Fe-Ti oxides, diopsidic-augite, and rare Ca-poor pyroxene, in order of decreasing abundance. Apatite, zircon and pyrrhotite occurs as inclusions within phenocrysts. Atmospheric glass losses (1040 km3) account for bulk-rock compositions that have SiO2 contents ranging from 63 to 67 wt.%. Glass compositions are high-silica rhyolite.Phenocrysts equilibrated at temperatures ranging from about 790 to 850°C and oxygen fugacities approximately 2.6 log units above the QFM buffer. Confining pressure estimates using the aluminum-in-hornblende geobarometer calibrated for calc-alkaline volcanic rocks suggest a mean pressure of 230±50 MPa corresponding to 7.5±1.5 km depth. These estimates are consistent with caldera formation accompanying emplacement.Crystal compositions for phenocrysts and mineral inclusions within phenocrysts are remarkably homogeneous throughout the outflow tuff, although minor zoning does occur. Given the dacitic composition of the magma, the weakly zoned phenocryst population cannot be modeled to produce the observed high-silica glass (melt) indicating open-system behavior for the magma. The high-silica rhyolite glass is interpreted to be an artifact of efficient magma mixing accompanying addition of highly evolved magma, or melt to intermediate composition magma. Mixing was followed by magma hybridization. Additional support for this hybridization model includes: (1) physically and chemically distinct populations of augite; (2) minor but unbiquitous resorbed plagioclase, biotite and hornblende phenocrysts; and (3) reverse zoning in some of the plagioclase euhedra within pumice lapilli.  相似文献   

14.
The Blackfoot Reservoir region in southeastern Idaho is recognized as a potential geothermal area because of the presence of several young rhyolite domes (50,000 years old), Quaternary basalt flows, and warm springs. North- to northwest-trending high-angle normal faults of Tertiary to Holocene age appear to be the dominant structural control of spring activity. Surface spring-water temperatures average 14°C except for a group of springs west of the Reservoir Mountains which average 33°C. Chemical geothermometers applied to fifty water samples give temperatures less than 75°C except for eight springs along the Corral Creek drainage. The springs along Corral Creek have Na-K-Ca temperatures that average 354°C, a direct result of high potassium concentrations in the water. A correction for carbon dioxide applied to the Na-K-Ca geothermometer lowers the estimated temperatures of the anomalous springs to near the measured surface temperatures, and Na-K-Ca-Mg temperatures for the anomalous springs are near 100°C. Mixing model calculations suggest that hot water with a temperature of approximately 120°C may be mixing with cooler, more dilute water in the springs from the Corral Creek drainage, a temperature supported by Na-K-Ca-Mg temperatures and mineral saturation temperatures.Stability relations of low-temperature phases in the system indicate that the large concentrations of potassium in the eight anomalous springs are derived from reactions with the potassium-bearing minerals muscovite and K-feldspar. Carbon dioxide and hydrogen sulfide gases may be derived through the oxidation of organic matter accompanied by the reduction of sulfate. Concentrations of major and minor elements, and gases found in springs of the Blackfoot Reservoir region are due to water-rock reactions at temperatures less than 100°C.Based on spring geochemistry, a geothermal reservoir of 100°C up to 120°C may exist at shallow (less than 2 km) depths in the Blackfoot Reservoir region.  相似文献   

15.
The Platanares geothermal area, Departamento de Copán, Honduras, is located within a graben that is complexly faulted. The graben is bounded on the north by a highland composed of Paleozoic (?) metamorphic rocks in contact with Cretaceous - Tertiary redbeds of unknown thickness. These are unconformably overlain by Tertiary andesitic lavas, rhyolitic ignimbrites, and associated sedimentary rocks. The volcanic rocks are mostly older than 14 Ma, and thus are too old to represent the surface expression of an active crustal magma body. Thermal fluids that discharge in the area are heated during deep circulation of meteoric water along faults in a region of somewhat elevated heat flow. Geothermometry based upon the chemical composition of thermal fluids from hot springs and from geothermal gradient coreholes suggests that the reservoir equilibrated at temperatures as high as 225 to 240°C, within the Cretaceous redbed sequence. Three continuously cored geothermal gradient holes have been drilled; fluids of about 165°C have been produced from two drilled along a NW-trending fault zone, from depths of 250 to 680 m. A conductive thermal gradient of 139°C/km, at a depth of 400 m, was determined from the third well, drilled 0.6 km west of that fault zone. These data indicate that the Platanares geothermal area holds considerable promise for electrical generation by moderate- to hightemperature geothermal fluids.  相似文献   

16.
Shallow submarine hydrothermal activity has been observed in the Bahía Concepción bay, located at the Gulf coast of the Baja California Peninsula, along faults probably related to the extensional tectonics of the Gulf of California region. Diffuse and focused venting of hydrothermal water and gas occurs in the intertidal and shallow subtidal areas down to 15 m along a NW–SE-trending onshore–offshore fault. Temperatures in the fluid discharge area vary from 50 °C at the sea bottom up to 87 °C at a depth of 10 cm in the sediments.Chemical analyses revealed that thermal water is enriched in Ca, As, Hg, Mn, Ba, HCO3, Li, Sr, B, I, Cs, Fe and Si, and it has lower concentrations of Cl, Na, SO4 and Br than seawater. The chemical characteristics of the water samples indicate the occurrence of mixing between seawater and a thermal end-member. Stable isotopic oxygen and hydrogen composition of thermal samples plot close to the Local Meteoric Water Line on a mixing trend between a thermal end-member and seawater. The composition of the thermal end-member was calculated from the chemistry of the submarine samples data by assuming a negligible amount of Mg for the thermal end-member. The results of the mixing model based on the chemical and isotopic composition indicate a maximum of 40% of the thermal end-member in the submarine vent fluid.Chemical geothermometers (Na/Li, Na–K–Ca and Si) were applied to the thermal end-member concentration and indicate a reservoir temperature of approximately 200 °C. The application of K–Mg and Na/Li geothermometers for vent fluids points to a shallow equilibrium temperature of about 120 °C.Results were integrated in a hydrogeological conceptual model that describes formation of thermal fluids by infiltration and subsequent heating of meteoric water. Vent fluid is generated by further mixing with seawater.  相似文献   

17.
A study of emplacement temperatures was carried out for the largest of the 22 November 1994 nuée ardente deposits at Merapi Volcano, based mainly on the response of plastic and woody materials subjected to the hot pyroclastic current and the deposits, and to some extent on eyewitness observations. The study emphasizes the Turgo–Kaliurang area in the distal part of the area affected by the nuée ardente, where nearly 100 casualties occurred. The term nuée ardente as used here includes channeled block-and-ash flows, and associated ash-clouds of surge and fallout origins. The emplacement temperature of the 8 m thick channeled block-and-ash deposit was relatively high, 550°C, based mainly on eyewitness reports of visual thermal radiance. Emplacement temperatures for ash-cloud deposits a few cm thick were deduced from polymer objects collected at Turgo and Kaliurang. Most polymers do not display a sharp melting range, but polyethylene terephthalate used in water bottles melts between 245 and 265°C, and parts of the bottles that had been deformed during fabrication molding turn a milky color at 200°C. The experimental evidence suggests that deposits in the Turgo area briefly achieved a maximum temperature near 300°C, whereas those near Kaliurang were <200°C. Maximum ash deposit temperatures occurred in fallout with a local source in the channeled block-and-ash flow of the Boyong river valley; the surge deposit was cooler (180°C) due to entrainment of cool air and soils, and tree singe-zone temperatures were around 100°C.  相似文献   

18.
The thermal evolution of continental crust during active collision is modeled through numerical solutions of the two-dimensional heat conduction equation for a rapidly moving medium. The boundary conditions used in the modeling are derived from geological and geophysical observations from the active collision zone in the South Island of New Zealand. The problem domain over which the solutions are obtained consists of a 40 km horizontal by 25 km vertical spatial plane with a vertical discontinuity at 10 km from the western boundary. To the east of this discontinuity, vertical uplift rates of up to 10 mm/a occur over a timespan of up to 4 Ma. Temperature distributions are calculated at 10 ka intervals over the 4 Ma duration. A two-dimensional high-temperature region is established upon initiation of uplift of the eastern block due to the advective component carrying heat upwards more rapidly than it can be dissipated laterally from the problem domain. Temperatures within the upper 5 km are greater than 400°C after 2.25 Ma with geothermal gradients of up to 200°C/km attained within the upper 3 km. At times greater than 2.5 Ma, the vertical temperature distribution changes little while the anomalously high temperatures spread laterally into the stationary crust.Using rheological equations to describe the brittle behaviour of a water-saturated upper crust and the ductile behaviour of a quartz-dominated lower crust, together with the thermal distribution of the conduction models, the mechanical evolution of a collision zone is investigated. In addition to high crustal temperatures and associated high heat flow, rapid uplift produces a weakening of the crust by raising of the depth of transition from brittle to ductile behaviour. Within the zone of most rapid uplift, the brittle-ductile transition rises from 13 km to less than 5 km after 1.5 Ma of uplift. Further uplift reduces the brittle layer to 3 km thickness and causes lateral spreading of the low-strength zone. The reductions in crustal strength caused by the thermal weakening produce a high-strain zone within the region of maximum uplift which is incapable of sustaining large differential stresses. This causes horizontal and vertical stress transfer and results in shallow seismicity increases in the adjacent crust as well as in intermediate depth seismicity within the high-strength upper mantle.Because the thermal and mechanical anomalies discussed are a function of rapid uplift, all regions of active continental collision may be expected to exhibit similar behaviour. Some mechanical and thermal characteristics of the Himalayan collision zone are briefly examined in light of the numerical modeling.  相似文献   

19.
Underground temperature measurements in two shallow boreholes have been carried out by the Japanese Antarctic Research Expedition at Syowa Station, East Antarctica from April, 1981 to January, 1985. Two quartz thermometers were installed in the first borehole at depths of 2 and 5 m and three were in the second one at depths of 1, 4 and 6.8 m. The mean underground temperatures in the first borehole were −8.181 and −8.843°C at depths of 2 and 5 m, and in the second one −8.242 and −8.220°C at depths of 4 and 6.8 m. As the mean air temperature at Syowa Station was −10.8°C, the underground temperature in the 2 −6.8 m depth range is about two degrees higher than the air temperature. The thermal diffusivities of the observation area are determined by the same principle of the Ångström method, using long-term underground temperature records. The thermal diffusivity around Syowa Station is established to be about two times larger than those of ordinary igneous and metamorphic rocks measured in the laboratory. The thermal conductivity of the drilled cores and surrounding outcropping rocks are also measured by the transient method with temperature conditions at +23°C and −20°C. The thermal conductivities measured in various samples at −20°C are about 7% larger than those at +23°C. Thes tendency is consistent with the results of holocrystalline rock experiments.  相似文献   

20.
Methods used previously to remove compositional modifications from volcanic gas analyses for Mount Etna and Erta'Ale lava lake have bean employed to estimate the gas phase composition at Nyiragongo lava lake, based on samples obtained in 1959. H2O data were not reported in 11 of the 13 original analyses. The restoration methods have been used to estimate the H2O contents of the samples and to correct the analyses for atmospheric contamination, loss of sulfur and for pre- and pest-collection oxidation of H2S, S2, and H2. The estimated gas compositions are relatively CO2-rich, low in total sulfur and reduced. They contain approximately 35–50% CO2 45–55% H2O, 1–2% SO2, 1–2% H2., 2–3% CO, 1.5–2.5% H2S, 0.5% S2 and 0.1% COS over,he collection temperature range 102° to 960° C. The oxygen fugacities of the gases are consistently about half an order of magnitude below quartz-magnetite-fayalite. The low total sulfur content and resulting low atomic S/C of the Nyiragongo gases appear to be related to the relatively low fO2 of the crystallizing lava. At temperatures above 800°C and pressures of 1–1.5 k bar, the Nyiragongo gas compositions resemble those observed in primary fluid inclusions believed to have formed at similar temperatures and pressures in nephelines of intrusive alkaline rocks. Cooling to 300°C, with fO2 buffered by the rock, results in gas compositions very rich in CH4 (50–70%) and resembling secondary fluid inclusions formed at 200–500°C in alkaline rocks. Below 600°C the gases become supersaturated in carbon as graphite. These inferences are corroborated by several reports of hydrocarbons in plutonic alkaline rocks, and by the presence of CH4-rich waters in Lake Kivu — a lake on the flanks of Nyiragongo volcano.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号