首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
  相似文献   

2.
Facies models for regressive, tide‐influenced deltaic systems are under‐represented in the literature compared with their fluvial‐dominated and wave‐dominated counterparts. Here, a facies model is presented of the mixed, tide‐influenced and wave‐influenced deltaic strata of the Sego Sandstone, which was deposited in the Western Interior Seaway of North America during the Late Cretaceous. Previous work on the Sego Sandstone has focused on the medial to distal parts of the outcrop belt where tides and waves interact. This study focuses on the proximal outcrop belt, in which fluvial and tidal processes interact. Five facies associations are recognized. Bioturbated mudstones (Facies Association 1) were deposited in an offshore environment and are gradationally overlain by hummocky cross‐stratified sandstones (Facies Association 2) deposited in a wave‐dominated lower shoreface environment. These facies associations are erosionally overlain by tide‐dominated cross‐bedded sandstones (Facies Association 4) interbedded with ripple cross‐laminated heterolithic sandstones (Facies Association 3) and channelized mudstones (Facies Association 5). Palaeocurrent directions derived from cross‐bedding indicate bidirectional currents which are flood‐dominated in the lower part of the studied interval and become increasingly ebb‐directed/fluvial‐directed upward. At the top of the succession, ebb‐dominated/fluvial‐dominated, high relief, narrow channel forms are present, which are interpreted as distributary channels. When distributary channels are abandoned they effectively become estuaries with landward sediment transport and fining trends. These estuaries have sandstones of Facies Association 4 at their mouth and fine landward through heterolithic sandstones of Facies Association 3 to channelized mudstones of Facies Association 5. Therefore, the complex distribution of relatively mud‐rich and sand‐rich deposits in the tide‐dominated part of the lower Sego Sandstone is attributed to the avulsion history of active fluvial distributaries, in response to a subtly expressed allogenic change in sediment supply and relative sea‐level controls and autocyclic delta lobe abandonment.  相似文献   

3.
Tide‐dominated deltas have an inherently complex distribution of heterogeneities on several different scales and are less well‐understood than their wave‐dominated and river‐dominated counterparts. Depositional models of these environments are based on a small set of ancient examples and are, therefore, immature. The Early Jurassic Gule Horn Formation is particularly well‐exposed in extensive sea cliffs from which a 32 km long, 250 m high virtual outcrop model has been acquired using helicopter‐mounted light detection and ranging (LiDAR). This dataset, combined with a set of sedimentological logs, facilitates interpretation and measurement of depositional elements and tracing of stratigraphic surfaces over seismic‐scale distances. The aim of this article is to use this dataset to increase the understanding of depositional elements and lithologies in proximal, unconfined, tide‐dominated deltas from the delta plain to prodelta. Deposition occurred in a structurally controlled embayment, and immature sediments indicate proximity to the sediment source. The succession is tide dominated but contains evidence for strong fluvial influence and minor wave influence. Wave influence is more pronounced in transgressive intervals. Nine architectural elements have been identified, and their internal architecture and stratigraphical distribution has been investigated. The distal parts comprise prodelta, delta front and unconfined tidal bar deposits. The medial part is characterized by relatively narrow, amalgamated channel fills with fluid mud‐rich bases and sandier deposits upward, interpreted as distributary channels filled by tidal bars deposited near the turbidity maximum. The proximal parts of the studied system are dominated by sandy distributary channel and heterolithic tidal‐flat deposits. The sandbodies of the proximal tidal channels are several kilometres wide and wider than exposures in all cases. Parasequence boundaries are easily defined in the prodelta to delta‐front environments, but are difficult to trace into the more proximal deposits. This article illustrates the proximal to distal organization of facies in unconfined tide‐dominated deltas and shows how such environments react to relative sea‐level rise.  相似文献   

4.
The Kaskapau Formation spans Late Cenomanian to Middle Turonian time and was deposited on a low‐gradient, shallow, storm‐dominated muddy ramp. Dense well log control, coupled with exposure on both proximal and distal margins of the basin allows mapping of sedimentary facies over about 35 000 km2. The studied portion of the Kaskapau Formation is a mudstone‐dominated wedge that thins from 700 m in the proximal foredeep to 50 m near the forebulge about 300 km distant. Regional flooding surfaces permit mapping of 28 allomembers, each of which represent an average of ca 125 kyr. More than 200 km from shore, calcareous silty claystone predominates, whereas 100 to 200 km offshore, mudstone and siltstone predominate. From about 30 to 100 km offshore, centimetre‐bedded very fine sandstone and mudstone record along‐shelf (SSE)‐directed storm‐generated geostrophic flows. Five to thirty kilometres from shore, decimetre‐bedded hummocky cross‐stratified fine sandstone and mudstone record strongly oscillatory, wave‐dominated flows whereas some gutter casts indicate shore‐oblique, apparently mostly unidirectional geostrophic flows. Nearshore facies are dominated by swaley cross‐stratified or intensely bioturbated clean fine sandstone, interpreted as recording, respectively, areas strongly and weakly affected by discharge from distributary mouths. Shoreface sandstones grade locally into river‐mouth conglomerates and sandstones, including conglomerate channel‐fills up to 15 m thick. Locally, brackish lagoonal shelly mudstones are present on the extreme western margin of the basin. There is no evidence for clinoform stratification, which indicates that the Kaskapau sea floor had extremely low relief, lacked a shelf‐slope break, and was probably nowhere more than a few tens of metres deep. The absence of clinoforms probably indicates a long‐term balance between rates of accommodation and sediment supply. Mud is interpreted to have been transported >250 km offshore in a sea‐bed nepheloid layer, repeatedly re‐suspended by storms. Fine‐grained sediment accumulated up to a ‘mud accommodation envelope’, perhaps only 20 to 40 m deep. Continuous re‐working of the sea floor by storms ensured that excess sediment was redistributed away from areas that had filled to the ‘accommodation envelope’, being deposited in areas of higher accommodation further down the transport path. The facies distributions and stratal geometry of the Kaskapau shelf strongly suggest that sedimentary facies, especially grain‐size, were related to distance from shore, not to water depth. As a result, the ‘100 to >300 m’ depth interpreted from calcareous claystone facies for the more central parts of the Interior Seaway, might be a significant overestimate.  相似文献   

5.
Analysis of Neogene cores from the Eastern Venezuela Basin along 65 km of a west–east trending shoreline allows characterization of the sedimentological and ichnological signatures of wave, river and tidal processes. The area displays deltas prograding northward from the Guyana Shield. Twenty‐three facies are defined and grouped into four categories (wave‐influenced, river‐influenced, tide‐influenced and basinal). Wave‐dominated deltaic deposits occur mostly in the Tácata Field. The delta plain was characterized by tide‐influenced distributary channels separated by interdistributary bays. Fluvial discharge in the delta front and prodelta was repeatedly interrupted by storm‐wave reworking and suspended sediment fallout. Delta‐front and prodelta deposits contain some ichnotaxa that typically do not occur in brackish water (for example, Chondrites and Phycosiphon). Amalgamated storm deposits are unburrowed or contain vertical Ophiomorpha. Lateral (especially on the updrift side) to the river mouths, waves caused nearly continuous accretion of the associated strandplains. These deposits are the most intensely bioturbated, and are dominated by the estenohaline echinoid‐generated ichnogenus Scolicia. River‐dominated deltaic deposits are present in the Santa Bárbara, Mulata, Carito and El Furrial Fields. Low‐sinuosity rivers characterized the alluvial plain, whereas the subaerial delta plain was occupied by higher‐sinuosity rivers. The subaqueous delta plain includes distributary channels and tide‐influenced interdistributary bays. Further seaward, successions are characterized by terminal distributary‐channel and distributary mouth‐bar deposits, as well as by delta‐front and prodelta deposits showing evidence of sediment gravity‐flow and fluid‐mud emplacement. Delta‐front and prodelta deposits are unbioturbated to sparsely bioturbated, suggesting extreme stress, mostly as a result of high fluvial discharge and generation of sediment gravity flows. Tidal influence is restricted to interdistributary bays, lagoons and some distributary channels. From an ichnological perspective, and in order of decreasing stress levels, four main depositional settings are identified: river‐dominated deltas, tide‐influenced delta plains, wave‐dominated deltas and wave‐dominated strandplain–offshore complexes.  相似文献   

6.
The Westphalian (Upper Carboniferous) Coal Measures of the Durham coalfield in NE England were deposited in lower and upper delta plain environments. Distributary channels crossed the plain and were separated by shallow, interdistributary lakes and bays. Detailed observation of three-dimensional (3-D) opencast (surface) mine exposures, in collaboration with subsurface borehole analysis, has revealed the existence of five varieties of channel deposits and two associated overbank facies within the Durham Coal Measures. Major distributary channels were the major avenues of sediment transport across the Coal Measures plain, were variably sinuous, mostly 1–2 km wide and deposited elongate belts of sand mostly up to 5 km wide. Proximal, major crevasse splay channels formed by the breaching of major channel banks during flood events, were straight, sand-filled and up to 400 m wide. Minor distributary channels formed by the sustained operation of such crevasses, varied from straight to highly sinuous, and deposited ‘shoestring’ sand/mud belts up to a few hundred metres wide. Minor crevasse channels, generally straight and up to 50 m wide, were formed through bank breaching of minor, and in a few cases major, distributaries. Distal feeder channels formed down-palaeocurrent extensions of minor distributaries which supplied interdistributary minor delta subsystems, were generally straight and up to 200 m wide. Of the two types of channel overbank (levee) deposits recognized, one, comprising thinly interbedded fine-grained sandstone and siltstone/claystone, is mostly, though not exclusively, associated with major distributary channels. The other, consisting of ‘massive’ siltstones with regularly spaced, thin claystone bands, is uniquely developed at the margins of minor distributary channels. The lower part of the Westphalian A succession in the northern Pennines records a change in the depositional environment upwards from a lower to upper delta plain. Through this transition, major channel deposits show evidence of having evolved from being of dominantly low sinuosity to being more variable in morphology. Channel sedimentation was profoundly influenced by regular, possibly seasonal, variations in flow stage and sediment load.  相似文献   

7.
The Barataria barrier coast formed between two major distributaries of the Mississippi River delta: the Plaquemines deltaic headland to the east and the Lafourche deltaic headland to the west. Rapid relative sea‐level rise (1·03 cm year?1) and other erosional processes within Barataria Bay have led to substantial increases in the area of open water (> 775 km2 since 1956) and the attendant bay tidal prism. Historically, the increase in tidal discharge at inlets has produced larger channel cross‐sections and prograding ebb‐tidal deltas. For example, the ebb delta at Barataria Pass has built seaward > 2·2 km since the 1880s. Shoreline erosion and an increasing bay tidal prism also facilitated the formation of new inlets. Four major lithofacies characterize the Barataria coast ebb‐tidal deltas and associated sedimentary environments. These include a proximal delta facies composed of massive to laminated, fine grey‐brown to pale yellow sand and a distal delta facies consisting of thinly laminated, grey to pale yellow sand and silty sand with mud layers. The higher energy proximal delta deposits contain a greater percentage of sand (75–100%) compared with the distal delta sediments (60–80%). Associated sedimentary units include a nearshore facies consisting of horizontally laminated, fine to very fine grey sand with mud layers and an offshore facies that is composed of grey to dark grey, laminated sandy silt to silty clay. All facies coarsen upwards except the offshore facies, which fines upwards. An evolutionary model is presented for the stratigraphic development of the ebb‐tidal deltas in a regime of increasing tidal energy resulting from coastal land loss and tidal prism growth. Ebb‐tidal delta facies prograde over nearshore sediments, which interfinger with offshore facies. The seaward decrease in tidal current velocity of the ebb discharge produces a gradational contact between proximal and distal tidal delta facies. As the tidal discharge increases and the inlet grows in dimensions, the proximal and distal tidal delta facies prograde seawards. Owing to the relatively low gradient of the inner continental shelf, the ebb‐tidal delta lithosome is presently no more than 5 m thick and is generally only 2–3 m in thickness. The ebb delta sediment is sourced from deepening of the inlet and the associated channels and from the longshore sediment transport system. The final stage in the model envisages erosion and segmentation of the barrier chain, leading to a decrease in tidal discharge through the former major inlets. This process ultimately results in fine‐grained sedimentation seaward of the inlets and the encasement of the ebb‐tidal delta lithosome in mud. The ebb‐tidal deltas along the Barataria coast are distinguished from most other ebb deltas along sand‐rich coasts by their muddy content and lack of large‐scale stratification produced by channel cut‐and‐fills and bar migration.  相似文献   

8.
Two Palaeogene fluvial fan systems linked to the south‐Pyrenean margin are recognized in the eastern Ebro Basin: the Cardona–Súria and Solsona–Sanaüja fans. These had radii of 40 and 35 km and were 800 and 600 km2 in area respectively. During the Priabonian to the Middle Rupelian, the fluvial fans built into a hydrologically closed foreland basin, and shallow lacustrine systems persisted in the basin centre. In the studied area, both fans are part of the same upward‐coarsening megasequence (up to 800 m thick), driven by hinterland drainage expansion and foreland propagation of Pyrenean thrusts. Fourteen sedimentary facies have been grouped into seven facies associations corresponding to medial fluvial fan, channelized terminal lobe, non‐channelized terminal lobe, mudflat, deltaic, evaporitic playa‐lake and carbonate‐rich, shallow lacustrine environments. Lateral correlations define two styles of alluvial‐lacustrine transition. During low lake‐level stages, terminal lobes developed, whereas during lake highstands, fluvial‐dominated deltas and interdistributary bays were formed. Terminal lobe deposits are characterized by extensive (100–600 m wide) sheet‐like fine sandstone beds formed by sub‐aqueous, quasi‐steady, hyperpycnal turbidity currents. Sedimentary structures and trace fossils indicate rapid desiccation and sub‐aerial exposure of the lobe deposits. These deposits are arranged in coarsening–fining sequences (metres to tens of metres in thickness) controlled by a combination of tectonics, climatic oscillations and autocyclic sedimentary processes. The presence of anomalously deeply incised distributary channels associated with distal terminal lobe or mudflat deposits indicates rapid lake‐level falls. Deltaic deposits form progradational coarsening‐upward sequences (several metres thick) characterized by channel and friction‐dominated mouth‐bar facies overlying white‐grey offshore lacustrine facies. Deltaic bar deposits are less extensive (50–300 m wide) than the terminal lobes and were also deposited by hyperpycnal currents, although they lack evidence of emergence. Sandy deltaic deposits accumulated locally at the mouths of main feeder distal fan streams and were separated by muddy interdistributary bays; whereas the terminal lobe sheets expand from a series of mid‐fan intersection points and coalesced to form a more continuous sandy fan fringe.  相似文献   

9.
In the Fuyu Reservoir of Songliao Basin, there occur a series of well-developed peculiar shallow lake delta facies, which can be divided to such three ones as the upper delta plain subfacies, the lower delta plain subfacies, and the delta front subfacies. Among them the upper delta plain subfacies mainly grows proximal distributary channels; the lower delta plain subfacies mainly grows distal ones. The entire Fuyu Reservoir has mainly developed 7 kinds of distributary channel patterns： proximal/ distal meandering type distributary channels, proximal/distal low-sinuosity type distributary channels, proximal/distal straight type distributary channels, and subaqueous distributary channels. Among these patterns, the proximal and distal meandering type distributary channels have bigger thickness of point bar and better sorting and low content of mud; moreover, they are the major reservoirs and occur in the bottom of Quan-4th member. The sandbars of the subaqueous distributary channels have higher mud content, and serve as the poorer reservoirs, and mainly occur in the top of Quan-4th member.  相似文献   

10.
The Middle Devonian Gauja Formation in the Devonian Baltic Basin preserves tide‐influenced delta plain and delta front deposits associated with a large southward prograding delta complex. The outcrops extend over 250 km from southern Estonia to southern Lithuania. The succession can be divided into 10 facies associations recording distributary channel belts that became progressively more tide influenced when traced southwards towards the palaeo‐shoreline, separated by muddy intra‐channel areas where deposition was characterized by crevasse splays, delta plain lakes, abandoned channel deposits and tidal gullies. Tidal currents influenced deposition over the entire delta plain, extending up to 250 km from the contemporary shoreline. Tidal facies on the upper delta plain differ from those on the lower delta plain and delta front. In the former case, deposition from river currents was only occasionally interrupted by tidal currents, e.g. during spring tides, resulting in mica and mudstone drapes, and distinctive graded cross‐stratification. The lower delta plain was dominated by tidal facies and tidal currents regularly influenced deposition. There was a change from progradation to aggradation from the lower to the upper part of the Gauja Formation coupled with a vertical decrease in tidal influence and a decrease in coarse‐grained sediment input. The Gauja Formation contrasts with established models for tide‐influenced deltas as the active delta plain was not restricted by topography. The shape of the delta plain, the predominant southward (basinward)‐directed palaeocurrents, and the thick sandstone succession, show that although tidal currents strongly influenced deposition at bed scale, rivers still controlled the overall morphology of the delta and the larger‐scale bedforms. In addition, there are no signs of wave influence, indicating very low wave energy in the basin. The widespread tidal influence in the Devonian Baltic Basin is explained by changes in the wider basin geometry and by local bathymetrical differences in the basin during progradation and aggradation of the delta plain, with changes in tidal efficiency accompanying the change in basin geometry produced by shoreline progradation.  相似文献   

11.
The Mackenzie Delta is a large fine‐grained delta deposited in a cold arctic setting. The delta has been constructed upon a flooding surface developed on a previous shelf‐phase delta. There are three principal depositional zones: the subaerial delta plain, the distributary channel mouth region and the subaqeous delta. The subaerial delta plain is characterized by an anastomosing system of high‐sinuosity channels and extensive thermokarst lake development. This region is greatly influenced by the annual cycle of seasonal processes including winter freezing of sediments and channels, ice‐jamming and flooding in the early spring and declining river stage during the summer and autumn. Deposition occurs on channel levees and in thermokarst lakes during flood events and is commonly rhythmic in nature with discrete annual beds being distinguishable. In the channel mouth environment, deposition is dominated by landward accretion and aggradation of mouth bars during river‐ and storm surge‐induced flood events. The subaqeous delta is characterized by a shallow water platform and a gentle offshore slope. Sediment bypassing of the shallow‐water platform is efficient as a result of the presence of incised submarine channels and the predominance of suspension transport of fine‐grained sediments. Facies of the shallow platform include silty sand with climbing ripple lamination. Offshore facies are dominated by seaward‐fining fine sand to silt tempestites. Sea‐ice scouring and sediment deformation are common beyond 10 m water depth where bioturbated muds are the predominant facies. The low angle profile of the shallow‐water platform is interpreted to be the combined response of a fine‐grained delta to (1) storm sediment dispersal; (2) autoretreat as a result of the increasing subaerial and subaqeous area of deposition as the delta progrades out of its glacial valley; (3) limited water depth above the underlying flooding surface; and (4) efficient nearshore bypassing of sediment through subice channels at the peak of spring discharge. Several indicators of the cold climate can be used as criteria for the interpretation of ancient successions, including thermokarst lake development, submarine channel scours, freeze–thaw deformation and ice‐scour deformation structures. Permafrost inhibits compaction subsidence and, together with the shallow‐water setting, also limits autocyclic lobe switching. The cold climate can thus influence stratal architecture by favouring the development of regional‐scale clinoform sets rather than multiple, smaller scale lobes separated by autocyclic flooding surfaces.  相似文献   

12.
Climbing dune‐scale cross‐statification is described from Late Ordovician paraglacial successions of the Murzuq Basin (SW Libya). This depositional facies is comprised of medium‐grained to coarse‐grained sandstones that typically involve 0·3 to 1 m high, 3 to 5 m in wavelength, asymmetrical laminations. Most often stoss‐depositional structures have been generated, with preservation of the topographies of formative bedforms. Climbing‐dune cross‐stratification related to the migration of lower‐flow regime dune trains is thus identified. Related architecture and facies sequences are described from two case studies: (i) erosion‐based sandstone sheets; and (ii) a deeply incised channel. The former characterized the distal outwash plain and the fluvial/subaqueous transition of related deltaic wedges, while the latter formed in an ice‐proximal segment of the outwash plain. In erosion‐based sand sheets, climbing‐dune cross‐stratification results from unconfined mouth‐bar deposition related to expanding, sediment‐laden flows entering a water body. Within incised channels, climbing‐dune cross‐stratification formed over eddy‐related side bars reflecting deposition under recirculating flow conditions generated at channel bends. Associated facies sequences record glacier outburst floods that occurred during early stages of deglaciation and were temporally and spatially linked with subglacial drainage events involving tunnel valleys. The primary control on the formation of climbing‐dune cross‐stratification is a combination between high‐magnitude flows and sediment supply limitations, which lead to the generation of sediment‐charged stream flows characterized by a significant, relatively coarse‐grained, sand‐sized suspension‐load concentration, with a virtual absence of very coarse to gravelly bedload. The high rate of coarse‐grained sand fallout in sediment‐laden flows following flow expansion throughout mouth bars or in eddy‐related side bars resulted in high rates of transfer of sands from suspension to the bed, net deposition on bedform stoss‐sides and generation of widespread climbing‐dune cross‐stratification. The later structure has no equivalent in the glacial record, either in the ancient or in the Quaternary literature, but analogues are recognized in some flood‐dominated depositional systems of foreland basins.  相似文献   

13.
Despite a globally growing seismic and outcrop analogue data set, the detailed (centimetre to decametre) internal stratal make up of deep‐marine basin‐floor ‘channelized‐lobe’ strata remain poorly known. An ancient analogue for modern, mixed‐sediment, passive margin, deep‐marine basin‐floor fans is the well‐preserved Neoproterozoic Upper and Middle Kaza groups in the southern Canadian Cordillera. This succession is a few kilometres thick and comprises six sedimentary facies representing deposition from different kinds of sediment‐gravity flows. Representative lateral and vertical assemblages of one or more of these facies comprise six stratal elements, including: isolated scours, avulsion splays, feeder channels, distributary channels, terminal splays, and distal and off‐axis fine‐grained turbidite units. The internal characteristics of the various stratal elements do not differ from more distal to more proximal settings, but the relative abundance of the various stratal elements does. The difference in relative abundance of stratal elements in the kilometre‐scale stratigraphy of the Kaza Group results in a systematic upward change in architecture. The systematic arrangement of the stratal elements within the interpreted larger bodies, or lobes, and then lobes within the basin‐floor fan, suggests a hierarchical organization. In this article a hierarchy is proposed that is based on avulsion but, also importantly, the location of avulsion. The proposed avulsion‐based hierarchical scheme will be a useful tool to bridge the scalar gap between outcrop and seismic studies by providing a single stratigraphic framework and terminology for basin‐floor stratal elements.  相似文献   

14.
Despite a low tidal range and relatively low wave conditions, the Mackenzie Delta is not prograding seaward but rather is undergoing transgressive shoreface erosion and drowning of distributary channel mouths. In the Olivier Islands region of the Mackenzie Delta the resultant morphology consists of a network of primary and secondary channels separated by vegetated islands. New ground is formed through channel infilling and landward-directed bar accretion. This sedimentation is characterized by seven sedimentary facies: (1) hard, cohesive silty clay at the base of primary channels which may be related to earlier, offshore deposition; (2) ripple laminated sand beds, believed to be channel-fill deposits; (3) ripple laminated sand and silt, interpreted as flood-stage subaqueous bar deposits; (4) ripple laminated or wavy bedded sand, silt and clay, representing the abandonment phase of channel-fill deposits and lateral subaqueous bar deposition from suspension settling; (5) a well sorted very fine sand bed, presumed to result from a single storm event; (6) parallel or wavy beds of rooted silt, sand and clay, interpreted as lower energy emergent bar deposits; and (7) parallel or wavy beds of rooted silt and clay, believed to represent present-day subaerial bar aggradation. The distribution of sedimentary facies can be interpreted in terms of the morphological evolution of the study area. Initial bar deposition of facies 3 and channel deposition of facies 2 was followed by lateral and upstream bar sedimentation of facies 3 and 4 which culminated with the deposition of the storm bed of facies 5. Facies 6 and 7 signify bar stabilization and abandonment. Patterned ground formed by thermal contraction and preserved in sediments as small, v-shaped sand wedges provides the most direct sedimentological indicator of the arctic climate. However, winter ice and permafrost also govern the stratigraphic development of interchannel and channel-mouth deposits. Ice cover confines flow at primary channel mouths, promoting the bypassing of sediments across the delta front during peak discharge in the spring. Permafrost minimizes consolidation subsidence and accommodation in the nearshore, further enhancing sediment bypass. Storms limit the seaward extent of bar development and promote a distinctive pattern of upstream and lateral island growth. The effects of these controls are reflected in the vertical distribution of facies in the Olivier Islands. The sedimentary succession differs markedly from that of a low-latitude delta.  相似文献   

15.
Lower Palaeozoic fluvial systems tend to be more sand-prone than those of later eras and the nature of coastal environments less certain. Field studies are presented that characterize the fluvial to marine transition over a distance of 80 km, in the Lower Cambrian of the Cotentin Peninsula, northern France. The sedimentary rocks are divided into six facies associations which represent deposition in proximal fluvial, distal fluvial, delta plain, delta front, pro-delta and offshore carbonate bank environments. The basin fill is sandstone-dominated and subdivided into three stratigraphic intervals. A 200 to 300 m thick basal interval contains very coarse-grained fluvial sandstones deposited during a relative sea level lowstand. An overlying interval, 250 to 1500 m thick, is a facies mosaic. Fluvial strata in the north-west pass laterally south-east into deltaic and shallow marine pro-delta sediments. The delta front deposits show repetitively stacked, upward-coarsening parasequences, 8 to 10 m thick, which reflect the repeated progradation of lobate, fluvially-dominated deltas onto a shallow marine shelf. The deltas formed following marine transgression and accumulated during a period of gradually rising relative sea level. An upper unit, 130 m thick, containing offshore stromatolitic and oolitic limestones, caps the study interval and represents deposition during a relative sea level highstand. The fluvial and delta distributary channel sandstones of the middle unit contain <1% mudstone. The cohesionless substrate determined that deltaic distributaries were predominantly braided in character and subject to common bifurcations which resulted in an ordered diminution of channel size and competence in a seaward direction. Terminal distributary channels show evidence of migratory levées and mouth-bars and consistently delivered fine to medium-grained sand to the delta front. The study highlights an example of pre-vegetation deltaic sedimentation that was hydraulically organized and predictable, despite being fed by braided fluvial systems with high levels of peak discharge.  相似文献   

16.
利用渤海湾盆地冀中坳陷饶阳凹陷留西油田留18断块内岩心、录井、测井、三维地震以及生产动态资料,应用层次分析的方法,对远源浅水辫状河三角洲前缘进行了相带划分,对砂体构型进行了解剖,明确了各相带内沉积构型样式的特征,建立了远源浅水辫状河三角洲前缘精细的沉积构型模式。研究表明: (1)研究区水体整体较浅,远源浅水辫状河三角洲前缘亚相广泛发育,并进一步分为前缘近端、前缘中端和前缘远端3个相带,不同相带在砂体厚度、岩性组合特征和砂体横向连通性等方面存在差异。(2)前缘远端水下分流河道水动力较弱,所携带沉积物较少,形成横向连通性较差的小规模河口坝,河口坝之间的厚层泥质披覆夹层为主要的夹层类型。(3)前缘中端分流河道水动力强度中等,形成串珠状或分叉树枝状的河口坝,单一河口坝由2~4期前积增生体构成,前积倾角约2.2°,增生体间的泥质披覆夹层为主要的夹层类型。(4)前缘近端分流河道水流强度较大,下切作用较强,所携带沉积物较多;下伏河口坝互相叠置切割,形成连片分布的复合体;单个河口坝由多个前积增生体构成,前积倾角约3.5°,增生体内的漫溢夹层及增生体间的泥质披覆夹层为主要夹层类型。  相似文献   

17.
Westphalian B (Duckmantian) alluvial Coal Measures along the Northumberland coast, NE England, comprise coal-capped coarsening-upward crevasse-splay sequences of shale, siltstone and sandstone, interbedded with a number of major distributary channel sandbodies, including the Table Rocks Sandstone. Lithofacies, architectural analysis and outcrop geometries divide the Table Rocks Sandstone into flaggy sandstone, massive sandstone, heterolithic, and mudstone facies associations, each comprising up to 7 lithofacies types. The three sandy facies associations are characterised by lenticular bed geometries on different scales producing a hierarchy of lensoid packages and associated bounding surfaces, all showing typical offset stacking patterns: (1) lenses, represent individual lenticular cross-bed sets, bounded by 1st order surfaces; (2) packages of lenses, called lens clusters are bounded by 2nd order surfaces, and are the basic architectural building block of the sandy facies associations; and (3) vertically stacked lens clusters called amalgamated lens clusters, bounded by 3rd order surfaces. The Table Rocks sandbody has a laterally extensive, irregular, lobate subsurface plan geometry, it displays a radial palaeocurrent pattern with 180° dispersion, and it forms part of a 14-m thick coarsening-upward regressive sequence. It is interpreted as a composite, lobate crevasse-splay delta system that prograded into a shallow interdistributary fresh to brackish water lake up to 14 m deep. The shallow lake water, fluvial input, and extensive development of traction structures such as cross-bedding and ripple cross-lamination suggests a friction-dominated delta, in which the four facies associations can be interpreted in terms of discrete elements of the mouth bar environment. The flaggy sandstone facies association represents the main, axial part of the mouth bar system, the erosively based massive sandstone facies association major subaqeous distributary channels, the lithologically more variable heterolithic facies association the medial mouth bar, and the mudstone facies association the distal mouth bar fringe and prodelta. Within this environmental setting amalgamated lens clusters are interpreted as small, discrete mouth bar sand lobes, whose offset, imbricate stacking pattern reflects channel spacing and bifurcation, the rate of channel shifting, or shallow depths and lack of accommodation space. Thus, lens clusters are interpreted as discrete growth elements of the mouth bar sand lobes, and lenses as individual bedforms making up these growth elements. Because of the high rate of channel shifting, lack of extensive erosion of the mouth bar lobes, and deposition of low discharge fines, the lobes retained much of their original depositional geometry, thereby providing advantageous gradients for offset deposition and stacking of adjacent sand lobes. Although the delta complex was maintained by frequent crevassing from the feeder channel, and by subsidence due to contemporaneous compaction and/or local tectonism, it was deeply incised on two occasions by subaqeous channels in response to high magnitude floods or falling lake level.  相似文献   

18.
The Grès de Champsaur turbidite system, deposited in a distal setting in the Alpine Foreland Basin of south‐eastern France, exhibits a repeated upsection alternation in sand body geometry between incised channels and sheet sands. The channels form symmetric lenticular erosional features, of width 900–1000 m (measured between the lateral limits of incision) and depth 65–115 m, and can be traced axially for up to 5 km. In each case, the channel fill is capped by a laterally persistent sandy sheet‐form interval, which lies upon a fine‐grained substrate beyond the channel margins. No intrachannel elements have been traced into the substrate sequence, suggesting that, before infill, the channels acted as open sea‐floor conduits of essentially the same dimensions as the preserved channel deposits. The channels are vertically stacked, although axial erosion juxtaposes younger channel axis deposits against the fill of older channels and their channel‐capping sheet sandstones to produce an apparently well‐connected composite sandstone body geometry. The predominant channel‐fill facies comprises coarse‐grained, amalgamated sandstones, which are commonly parallel‐ or cross‐stratified. Subsidiary facies of finer grained sandstone–mudstone couplets and clast‐bearing muddy debrites are commonly preserved as erosional remnants, suggesting a complex channel history of aggradation and erosion. The repeated cycles of channel incision, infill and transition to sheet sandstone development indicate repetitive incision and healing of the palaeo‐sea floor. A model is proposed that links incision to the development of relatively steep axial gradients (parallel to the mean dispersal direction) and the return to sheet‐form deposition to the re‐establishment of lower axial gradients, with the repetitive switch between incisional channels and sheet sandstones driven by changes in sediment input rate against a background of ongoing sea‐floor tilting.  相似文献   

19.
 利用松辽盆地新立-新北地区井间距约200 m的1800余口探井及开发井资料,在岩性观察和测井相识别的基础上,编制嫩江组三段I砂组砂岩等厚图和连井剖面图。对砂体进行半定量统计分析发现,目的层段为浅水三角洲前缘沉积,水下分流河道砂体是最主要的骨架砂体类型,在平面上延伸20 km以上,向三角洲前缘末端演化出3种类型:水下曲流河道砂体,呈长豆荚状,宽600~900 m,延伸8~10 km分叉;水下分汊河道砂体,呈短豆荚状,分叉呈“人”字形或菱形,宽500~900 m,延伸2~3 km分叉;水下网结河道砂体,分叉呈网状展布,宽300~500 m,直线延伸0.5~1 km分叉。  相似文献   

20.
松辽盆地中央坳陷南部下白垩统泉头组四段沉积相   总被引：7，自引：0，他引：7  
松辽盆地中央坳陷南部下白垩统泉头组四段沉积时期,松辽盆地地形平缓,基底沉降缓慢,在湖平面整体扩张及浅水背景下河流入湖成三角洲沉积。通过岩心观察、相标志与测井相研究,该区储层主要为岩屑长石砂岩和长石岩屑砂岩,识别出三角洲平原、三角洲前缘、前角洲3种亚相,以及分支河道、天然堤、决口扇、分支河道间湾、水下分支河道、水下决口扇、河口坝、远沙坝、水下分支河道间湾9种微相三角洲平原、三角洲前缘广泛发育,前三角洲不发育。三角洲平原分支河道通过填积和频繁的分叉改道,向湖盆中心方向长距离推进,在三角前缘的浅水区域发育了大量水下分支河道,分支河道与水下分支河道砂体相互切割、叠加,形成了平均宽度200~600 m、平均厚度3~8 m的道单砂体,（水下）分支河道砂体构成了油气富集的主要储集体。该区沉积相的精细研究,为进一步调整开发井网奠定了基础。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号