共查询到19条相似文献，搜索用时 203 毫秒
1.
考虑随机波浪载荷的导管架平台结构优化设计 总被引：1，自引：0，他引：1
研究海洋平台适应恶劣海况的设计理论，应用ANSYS软件对位于渤海湾的CII导管架海洋平台进行动力分析，得到CII平台基本动力学参数和在随机波浪载荷作用下的动力响应。CII平台是以管件为主的空间框架结构，将管件外径作为固定约束，以其壁厚作为设计变量，考虑刚度、强度和稳定性等约束条件，以结构的总重量为优化目标，对平台进行构件尺寸的优化设计，计算结果表明目标函数值比原设计减小4．33％，经济效益明显。此研究方法对近海导管架海洋平台的结构设计具有实际参考价值。 相似文献
2.
常规耐压结构拓扑优化设计研究主要集中于静水压条件下的设计相关载荷拓扑优化理论及方法。但是,在深海环境下,耐压结构可能面临内爆所产生的冲击载荷,其载荷呈现高频率的周期性变化。为研究载荷变化对耐压结构优化设计的影响,在BILE模型的基础上,结合修正的SIMP插值模型,开展不同频率、设计相关动载荷作用下的水下耐压结构拓扑优化理论及方法研究。设计相关动载荷的难点在于不仅载荷的作用位置和方向在优化过程中发生变化,且其大小也随优化过程进行而发生变化,这是与常规设计相关静载荷本质的不同。通过经典的拱形结构优化算例验证BILE模型在动力学拓扑优化中的可行性,进而研究设计相关动载荷作用下的水下耐压结构的最佳拓扑形式。研究表明,在低频时,圆环型耐压结构无明显变化,但多球交接耐压结构在交接处会出现明显材料聚集;高频时,两者均发生明显变化,得到耐压结构新形式。关于设计相关动载荷作用下的水下耐压结构拓扑优化研究,将对新型水下耐压结构的探索具有一定的工程应用价值。 相似文献
3.
4.
5.
极端荷载作用下海洋导管架平台体系可靠度分析 总被引：4，自引：1，他引：4
采用非线性倒塌分析方法，考虑桩－土－结构的非线性相互作用，研究了导管架平台在极端荷载作用下承载能力的计算模型，分析了平台结构体系在极端荷载作用下的全倒塌全过程，在此基础上，结合蒙特卡洛法，提出了海洋导管架平台结构的体系可靠度计算方法。最后对工程实例－涠11－4C海洋平台的结构进行了体系可靠性分析，并对比分析了不同的荷载效应计算公式对计算经的影响，研究表明计算经满足工程设计要求，便于工程应用。 相似文献
6.
单点系泊海洋导管架平台结构体系可靠性分析 总被引：4，自引：1，他引：3
采用非线性逐步倒塌分析方法,考虑桩-土-结构的非线性相互作用,研究了单点系泊海洋导管架平台在极端荷载作用下的承载能力计算模型,在此基础上结合蒙特卡洛随机抽样法,提出了单点系泊海洋导管架平台结构体系可靠度计算方法。最后对工程实例BZ28-1SPM单点系?白海洋导管架平台结构在20年设计基准期和50年重现期进行了体系可靠性分析：研究结果表明：用50年重现期的环境荷载参数来进行BZ28-1SPM单点系泊海洋导管架平台结构的设计是合理的;在环境荷载中起主导作用的是由波浪引起的系泊力;在海洋平台结构的设计及对已服役平台结构的评估中运用体系可靠度理论,可以为海洋平台结构的设计、维护和评估提供理论依据。 相似文献
7.
针对海洋环境中的半潜式平台多方面不确定性,基于半潜式平台结构整体强度分析方法,考虑多种波浪荷载作用的结构响应,采用非线性逐步垮塌分析方法,研究平台在不同控制工况下的极限承载力模型,建立相应的功能函数.根据结构体系可靠度理论和失效模式之间的关系,采用串联体系的可靠度计算方法.最后,对一座具体半潜式平台在100年重现期波浪荷载作用下进行了体系可靠性计算.计算结果表明平台整体可靠度水平由波浪引起的主要结构响应形式决定.通过计算,验证可靠度计算方法具有高效性和可行性,可以为大型深水浮式平台结构的设计、维护和评估提供理论依据. 相似文献
8.
通过海洋平台桩-土非线性弹簧模型的研究,结合桩基荷载-位移数据计算程序的编制,为工程实际应用提供简便可靠的方法。对某自升式钻井平台在完好状态和受损状态下的极限承载能力作了对比研究,通过逐级增加载荷的方法,基于精确计算模型对平台结构进行非线性分析,具体依据载荷类型、载荷作用力方向等,得到12种计算工况,研究老龄平台在受损状态下对强度储备的影响,并评估其安全状况。考虑外界荷载的随机性和不确定性,基于极限承载能力分析,采用等效荷载法,运用JC法进行平台体系可靠性计算,分析完好平台与老龄平台的结构体系可靠性,并作对比研究。 相似文献
9.
在海洋平台摇摆墙体系基础上,提出在海洋平台和摇摆墙之间刚性连接杆的铰接点处安装粘弹性转角阻尼器的减振措施,对海洋平台进行进一步减振控制。对粘弹性转角位移阻尼器的刚度和阻尼参数进行了优化分析,可知阻尼器的阻尼与刚度在结构减振中起到了十分重要的作用,且存在特定范围内的优化值。以JZ20-2北高点井口平台为例,利用ANSYS进行地震荷载作用和实测挤压冰荷载下的仿真分析,研究了粘弹性转角阻尼器在海洋平台和摇摆墙之间刚性连接杆铰接点处的不同安装方式,对比分析减振效果。结果表明,在该体系刚性连接杆的铰接点处安装粘弹性转角阻尼器能显著降低结构的振动反应,连接杆右侧安装粘弹性转角阻尼器的方式为减振效果最佳方式。 相似文献
10.
油气爆炸作用下海洋平台抗冲结构研究 总被引：1，自引：1，他引：0
海洋平台在服役期间,常会遭受到油气泄露而爆炸引起的冲击破坏.结合歧口QK18-2海洋平台结构,利用非线性瞬态动力学计算软件MSC.Dytran对气体爆炸造成海洋平台结构的损伤机理进行数值仿真研究.在此基础上,详细研究舱室在爆炸载荷下的动态响应,将舱室和爆炸区之间的围壁结构采用增加板厚和改变支撑结构形式、尺寸等四种不同的方式进行比较研究,得出支撑结构对于平台抗冲击的重要性,从而提出有效可行的抗冲结构形式. 相似文献
11.
Offshore jacket platform is widely used as production or oil recovering platform in the shallow sea, and is also applied to the offshore wind turbine supporting structure in the recent years. The jacket structures are normally designed to be conservative and bulky according to various design codes. In this work, a structural optimization design method for jacket platform structure has been developed based on topology optimization theory. The topology optimization method is applicable at an early design stage, which can determine the initial structure and force transmission path. The whole design space is chosen as design variables, and the goal is to maximize the structural stiffness. A set of constraints based on multi-criteria design assessment is applied according to standard requirements, which includes stress, deformation, vibration and design variable constraints. The optimization results are compared with the original platform for static performance, dynamic performance and Ultimate Carrying Capacity (UCC). Results show that the optimized structure show a 13.7% reduction in the global mass, 46.31% reduction in the maximum equivalent stress, and large ultimate carrying capacity ability under the same environmental loads. It is demonstrated that the proposed topology optimization method is capable of effectively determining the optimal design of jacket platform structures. 相似文献
12.
1.IntroductionLoad and Resistance Factor Design(LRFD)isthe commonly adoptedreliability-based designfor-mat for structural design(CNE,1990;AAHTO,1994;OMTC,1983;CMC,1984).Code calibra-tionforthe LRFDformat is a processto determinethetarget reliability by de… 相似文献
13.
A new method for platform design, named parametric platform design method (PPDM), is presented in this paper in order to improve the mobile platform design efficiency. In this method, an integrated parametric system that fully considers the characteristics of the platform is developed, which significantly optimizes the design process with the top–bottom design concept. In the parametric system, the main geometric dimensions are taken as parameters, while the topology between the structure members, the function requirements and the safety requirements are converted into geometric constraints. By geometric constraint solving (GCS), a set of parameters that satisfy all the given constraints are determined, and then the design scheme is obtained by several core algorithms, such as parametric tank subdivision, 3D stability calculation, parametric structure design, FEM preprocessing, etc. The parametric method greatly increases the changeability and the reusability of the platform model, and concurrent design is well supported. As the model is driven by parameters, PPDM is an excellent method for optimization design. As a result, PPDM has incomparable advantages on the design efficiency over traditional methods. 相似文献
14.
The concrete-steel platform structure is rather complicated because it involves such materials as concrete, reinforcing bars, steel, and so on. K the traditional dimension optimization method is employed, the optimal design of the platform will meet many handicaps, even it cannot be implemented at all. The multilevel optimal design approach is an efficient tool for the solution of large-scale engineering structures. In this paper, this approach is applied to the optimal design of a concrete-steel platform, which is formulated as a system level optimal design problem and a set of uncoupled substructure level optimal design problems. The process of optimization is a process of iteration between system level and substructure level until the objective function converges. An illustrative example indicates that this method is effective in the optimal design of concrete-steel platforms. 相似文献
15.
16.
传统的卡箍设计方法是通过建立海洋平台有限元模型并在强度分析基础上提取受损单元处完好时的最大载荷,将此载荷作为卡箍设计的初始条件。而卡箍实际承担的是平台安装上卡箍之后载荷重新分担下相应受损处承受的载荷,一般会比初始设计载荷大。着重研究载荷重新分担对膨胀式自应力灌浆卡箍防滑设计和防撬设计的影响,针对渤海湾中主要承受冰载荷作用的一个典型平台结构,提出了在线单元平台有限元模型上近似模拟卡箍的方法,提取载荷重新分担下的卡箍设计载荷进行了分析。结果表明载荷重新分担对卡箍防滑设计影响较小,但对防撬设计有着显著影响,并对此提出了在螺栓设计时增加螺栓预紧力安全系数的应对措施。 相似文献
17.
Zhang Lianying Hu Yunchang Li Xiangjing Doctor Lecturer Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin Professor Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin Master Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin 《中国海洋工程》1998,(1)
In this paper,the problem of reliability-based optimal design of simple offshore platform isstudied,and a nonlinear fatigue damage model based on damage mechanics and genetic algorithms areused in the fatigue reliability optimum design of the structure under stochastic wave load.The fatigue dam-age model and the yield failure reliability analyzing model are used in the paper.The reliability of the mod-els and the effectiveness of genetic algorithm are shown by the results of optimum design. 相似文献
18.
船体支柱的布局影响到船舶功能性舱室的布置及相应的结构设计,而目前支柱布局多依赖母型船或者工程师设计经验,缺少基于数学优化的技术支撑。变密度的拓扑优化方法可将属于离散变量优化的支柱布局问题转化为连续变量优化问题。通过悬臂梁—支柱结构的算例,验证了该方法用于解决支柱布局优化问题的可行性。针对某型VLCC的支柱—大跨度甲板结构的支柱布局优化问题,根据布置限制条件设定了支柱优化设计域,选择了两种不同的优化目标函数进行支柱的布局优化设计,最后对优化结果进行了对比分析。结果表明,本方法具有较好的可行性,无需过多设计经验即可优化得到结构性能较好的支柱布局方案,可为此类的支柱布局优化设计提供技术支撑。 相似文献
19.
Reliability-Based Design for Jacket Platform Under Extreme Loads 总被引：7，自引：0，他引：7
In this paper, reliability analysis for the offshore jacket platform with the interaction of structure- pile- soil under extreme environmental loads is carried out. The inherent uncertainties of the environmental load, foundation soil, platform itself, and calculating models are evaluated. The action of extreme loads on the offshore platform is modeled as a function of extreme wave height. The system capacity of the whole platform is determined by nonlinear pushover analysis, and the relevant probability property is obtained by the simulation method. The reliability model for the whole jacket platform is described as the relationship between the load and resistance based on the offshore design codes. The reliability of whole platform is calculated by the analytical method and the importance sampling method on the basis of a case study for a tripod jacket platform. 相似文献