首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 109 毫秒
1.
《Geodinamica Acta》2013,26(3-4):299-316
Western Anatolia (Turkey) is a region of widespread active N-S continental extension that forms the eastern part of the Aegean extensional province. The extension in the region is expressed by two distinct/different structural styles, separated by a short-term gap: (1) rapid exhumation of metamorphic core complexes along presently low-angle ductile-brittle normal faults commenced by the latest Oligocene-Early Miocene period, and; (2) late stretching of crust and, consequent graben evolution along Plio-Quaternary high-angle normal faults, cross-cutting the pre-existing low-angle normal faults. However, current understanding of the processes (tectonic quiescence vs N-S continental compression) operating during the short-time interval is incomplete. This paper therefore reports the results of recent field mapping and structural analysis from the NE of Küçük Menderes Graben—Kiraz Basin—that shed lights on the processes operating during this short-time interval. The data includes the thrusting of metamorphic rocks of the Menderes Massif over the Mio-Pliocene sediments along WNW-ESE-trending high-angle reverse fault and the development of compressional fabrics in the metamorphic rocks of the Menderes Massif. There, the metamorphic rocks display evidence for four distinct phases of deformation: (1) southfacing top-N ductile fabrics developed at relatively high-grade metamorphic conditions, possibly during the Eocene main Menderes metamorphism (amphibolite facies) associated with top-N thrust tectonics (D1); (2) top-S and top-N ductile gentle-moderatley south-dipping extensional fabrics formed at relatively lower-grade metamorphic (possibly greenschist facies) conditions associated with the exhumation of Menderes Massif along presently low-angle normal fault plane that accompanied the first phase of extension (D2); (3) moderately north-dipping top-S ductile-brittle fabrics, present configuration of which suggest a thrust-related compression (D3); and (4) south-facing approximately E-W-trending brittle high-angle normal faults (D4) that form the youngest structures in the region. It is interpreted that D4 faults are time equivalent of graben-bounding major high-angle normal faults and they correspond to the second phase of extension in western Anatolia. The presence of thrust-related D3 compressional fabrics suggests N-S compression during the time interval between the two phases of extension (D2 and D4). The results of the present study therefore support the episodic, two-stage extension model in western Anatolia and confirm that a short-time, intervening N-S compression separated the two distinct phases.  相似文献   

2.
The Ribeira Belt (Brazil) is a Neoproterozoic collisional-related feature that was located in a south-central position in West Gondwana. We present quantitative data on finite strain, flow vorticity and deformation temperatures for the Curitiba Terrane, a major segment of the southern Ribeira Belt. Six deformation phases (D1-D6) related with crustal thickening and exhumation were recognized. D1 and D2-related microstructures are preserved exclusively within porphyroblasts, in part grown during stages of high-pressure (∼9–12 kbar) isobaric heating after crustal thickening. D3 phase was active from peak metamorphism attained in contrasting crustal levels (810–400 °C), to the early stage of exhumation (500–400 °C), as indicated by petrological, microstructural and quartz c-axis fabric evidence. Kinematic vorticity results indicate that the SL3 mylonitic fabric resulted from a simple shear-dominated deformation related with westward thrusting. North-verging overturned D4 folds with E-W-trending subhorizontal axes derived from a pure shear-dominated deformation. Regional D5 open folds with subvertical axes and NNE-SSW-trending traces were produced by indentation tectonics. D6 phase comprises retrograde orogen-parallel transcurrent shear zones related with scape tectonics. Geochronological data indicate that D3-D6 phases occurred between 584 and 580 Ma, suggesting a fast exhumation rate of ∼8 mm/year for the deepest rocks from the southern Ribeira Belt.  相似文献   

3.
In Kameng Valley of Arunachal Pradesh, the crystalline rocks of Se La Group of Higher Himalaya are thrust over the Lesser Himalayan rocks of Dirang Formation, Bomdila Group along the Main Central Thrust and exhibit well preserved structures on macro- to microscopic scales. Detailed analysis of structures reveals that the rocks of the area have suffered four phases of deformation D1, D2, D3 and D4. These structures have been grouped into (i) early structures (ii) structures related to progressive ductile thrusting and (iii) late structures. The early structures which developed before thrusting formed during D1 and D2 phases of deformation, synchronous to F1 and F2 phases of folding respectively. The structures related to progressive ductile shearing developed during D3 phase of deformation, when the emplacement of the crystalline rocks took place over the rocks of Dirang Formation along the Main Central Thrust. Different asymmetric structures/kinematic indicators developed during this ductile/brittle-ductile regime suggest top-to-SSW sense of movement of the crystalline rocks of the area. D4 is attributed to brittle deformation. Based on satellite data two new thrusts, i.e. Tawang and Se La thrusts have been identified parallel to Main Central Thrust, which are suggestive of imbricate thrusting. Strain analysis from the quartz grains of the gneissic rocks reveals constriction type of strain ellipsoid where k value is higher near the MCT, gradually decreases towards the north. Further, the dynamic analysis carried out on the mesoscopic ductile and brittle-ductile shear zones suggest a NNE-SSW horizontal compression corresponding to the direction of northward movement of Indian Plate.  相似文献   

4.
The NE to ENE trending Mesozoic Xingcheng-Taili ductile shear zone of the northeastern North China Craton was shaped by three phases of deformation. Deformation phase D1 is characterized by a steep, generally E–W striking gneissosity. It was then overprinted by deformation phase D2 with NE-sinistral shear with K-feldspar porphyroclasts forming a subhorizontal low-angle stretching lineation on a steep foliation. During deformation phase D3, lateral motion accommodated by ENE sinistral strike-slip shear zones dominated. Associated fabrics developed at upper greenschist metamorphic facies conditions and show the deformation characteristics of middle- to shallow crustal levels. In some parts, the older structures have been in turn overprinted by late-stage sinistral D3 shearing. Finite strain and kinematic vorticity in all deformed granitic rocks indicate a prolate ellipsoid (L-S tectonites) near plane strain. Simple shear-dominated general shear during D3 deformation is probably of general significance. The quartz c-axis textures indicate prism-gliding with a dominant rhomb <a> slip and basal <a> slip system formed mainly at low-middle temperatures. Mineral deformation behavior, quartz c-axis textures, quartz grain size and the Kruhl thermometer demonstrate that the ductile shear zone developed under greenschist facies metamorphic conditions at deformation temperatures ranging from 400 to 500 °C. Dislocation creep is the main deformation mechanism at a shallow crustal level. Fractal analysis showed that the boundaries of recrystallized quartz grains had statistically self-similarities. Differential stresses deduced from dynamically recrystallized quartz grain size are at around 20–39 MPa, and strain rates in the order of 10−12 to 10−14 s−1. This indicates deformation of granitic rocks in the Xingcheng-Taili ductile shear zone at low strain rates, which is consistent with most other ductile shear zones. Hornblende-plagioclase thermometer and white mica barometer indicate metamorphic conditions of medium pressures at around ca. 3–5 kbar and temperatures of 400–500 °C within greenschist facies conditions. The main D3 deformation of the ENE-trending sinistral strike-slip ductile shearing is related to the roll-back of the subducting Pacific plate beneath the North China Craton.  相似文献   

5.
《Geodinamica Acta》2001,14(6):345-360
In the southeastern Ötztal basement remnants of eo-Alpine high-pressure metamorphism as well as deformation related to the emplacement of these eclogites are preserved. The eo-Alpine age of the two main ductile deformation phases is constrained by Ar-Ar and Rb-Sr mica cooling ages of about 80 Ma, providing a lower, and by deformed Permo-Mesozoic rocks, providing an upper time limit. While high-pressure minerals (M1) are aligned along structures of the first deformation phase (D1), subsequently grown amphibolite facies minerals (M2) are late- to post-kinematic with respect to the third phase (D3). D1 is characterized by non-coaxial deformation producing an E-W oriented stretching lineation, the younger phases D2 and D3 by folding, where the older set of folds strikes N-S, the younger one E-W. These results imply a basic change of tectonic movement direction during the eo-Alpine event. Structural and petrological evidences favour a two-stage exhumation model, where tectonic exhumation (D1, D2 and D3) is correlated with the first stage, statically overprinted under amphibolite facies conditions (M2). As there is no evidence of significant deformation after this stage, erosion and surface uplift most probably represent the relevant processes for the last part of the exhumation path. During this stage the high-pressure rocks were exhumed from amphibolite facies conditions to the surface.  相似文献   

6.
The metasedimentary rocks of the area around Mangpu constitute a portion of the hinge zone of the northern limb of the major synform of Lower Darjeeling Himalaya. The rocks display evidences of multiple deformation and at least three major phases of deformation have been recognized. The time relations between the phases of deformation (D1, D2, D3) and metamorphic crystallization reveal a single major prograde metamorphic event that initiated with the D1 deformation and finally outlasted it. The earlier phase of this metamorphism is essentially regional syn-tectonic lowgrade (greenschist facies) which may be designated (M1, early). This was followed by regional static metamorphism (M1, late) in the post-tectonic phase between D1 and D2 deformations (upper green schist and amphibolite facies). This M1 metamorphism is superposed by later retrogressive metamorphism (M2) during the D2 and D3 deformations (lower greenschist facies). Within the study area four isograds have been delineated by the first appearance of index minerals in the pelitic schists and gneiss which display Barrovian type of metamorphism.  相似文献   

7.
A suite of rocks from Borra Carbonate Granulite Complex (BCGC) in the Eastern Ghats granulite belt displays superposed structures and overprinted mineral assemblages that reveal multiple episodes of tectonothermal reworking of the complex under granulite facies condition. Five distinct episodes of deformation (D1, D2, D3, D4 and D5) and four phases of metamorphism (M1, M2, M3 and M4) are recorded. The signature of the earliest tectonothermal event, D1 is a gneissic foliation (S1) denned by segregation of peak granulite facies mineral assemblages corresponding to prograde M1 metamorphism. M2 metamorphic overprint represents an episode of near-isobaric cooling of the complex under a static condition. D2 represents an episode of ductile deformation manifested by isoclinal folding (F2) and associated extensional structures, within a broad framework of coaxial bulk deformation. The present study reveals that D2 took place subsequent to M2 - Subsequent deformation, D3, produced F3 folds and also deformations of boudins formed during D2. M3, which is synchronous with F3, represents a near isothermal decompression of the BCGC. This was followed by a weak structural readjustment (D4), producing E-W cross folds. The latter was not, however, associated with any recognizable petrological reworking. In the terminal events, deformation (D5) and mineral reactions (M4) were localized along narrow intersecting shear zones. The latter acted as channelways for carbonic and still later hydrous fluid infiltration. The available thermobarometric data from BCGC and other areas of the Eastern Ghats belt reveal that reworking during M2 and M3 ensued in a thermally perturbed regime. The high thermal regime might also have persisted during carbonic fluid infiltration related to terminal reworking (M4).  相似文献   

8.
Three important phases of deformation (D1-D3) affect the Precambrian metamorphic rocks of the Strathgordon region, S.W. Tasmania. Textural analysis has related phengite development to the deformation events in quartz + phengite phyllites. Phengite chemistry suggests a prograde metamorphic history at about 4 kb from 400°C at D1 to 450°C at D2. The significant feature of this work is that a sharp break in conditions, shown by a marked change in the composition of the phengites, occurs from D2 to D3, the latter taking place at about 250°C and at a pressure <4 kb. A pronounced hiatus in the deformation history is indicated for the D2/D3 interval. During D3 water was introduced.  相似文献   

9.
Five deformational “episodes” (D1-D5) during which folds and associated cleavages formed, and a later period of faulting dominated by strike-slip movements, comprise the structural sequence in the Nambucca slate belt. D1 structures are most widespread and involved greatest strain; D2-D4 structures have affected progressively smaller areas and indicate progressively smaller strains. Strong compressive stresses during D1 produced horizontal shortening and vertical extension, and the D2-D4 structures result from adjustments to this initial strain. Regional metamorphism accompanied D1, and D1 strain is greatest in the more highly metamorphosed rocks. Some granitic bodies were probably emplaced at this time, but most plutons rose only after folding had ceased. Orogenesis, as indicated by folding and regional metamorphism lasted less than 10 m.y., but faulting continued for at least another 30 m.y.The slate belt accumulated close to a consuming plate margin, but deformation commenced only after subduction ceased, with compressive stresses generated by coupling across the former plate boundary. The development of a wrench regime during D5, and its continued existence during a long period of faulting, suggests either that the consuming plate boundary was replaced by a transform fault, or that subduction stepped oceanward and underthrusting was obliquely directed.  相似文献   

10.
The Maximum Effective Moment (MEM) criterion predicts that the initial orientation of ductile shear zones and shear bands is ~55° relative to the maximum principal stress axis (σ1) and that the kinematic vorticity number (Wk) is ~0.94. These preferred orientations should be reflected in the pattern of quartz -fabrics in shear zones and shear bands. Common quartz -fabrics in plane strain can be divided into low-temperature (L) and high-temperature (H) fabrics, with each group showing three patterns. A steady flow with a constant value of Wk≈0.94 gives rise to L-1 and H-1 patterns, which are commonly characterized by a single axis girdle normal to the shear zone and a single -point maximum parallel to the shear zone.Once the conjugate set develops, L-1 and H-1 have opening angles of ~70° and ~110°, respectively. L-2 and H-2 are asymmetric patterns associated with variable deformation partitioning and vorticity values of 0< Wk<0.94. In contrast, L-3 and H-3 are symmetric patterns associated with 100% deformation partitioning and Wk=0. The opening angle in quartz -fabrics is implicitly linked to the temperature during deformation. The opening angle is ~70° at low temperature and ~110° at high temperature. However, a linear correction between the opening angle and the temperature cannot be established. During deformation partitioning, synthetic shear bands form earlier than antithetic bands and are more easily developed. This may result in opening angles of <70° for low-temperature fabrics and of >110° for high-temperature fabrics. The following criteria can be used to recognize reworked shear zones that have experienced multiple orogenic phases and changes in the stress state: 1) the initial Wk is larger or smaller than ~0.94; 2) the change in Wk is abrupt, rather than progressive; 3) inconsistent shear senses are inferred for the different phases of deformation; and 4) a negative value of Wk is found in reworked shear zones.  相似文献   

11.
《Gondwana Research》2011,19(4):611-631
The Trans-North China Orogen separates the North China Craton into two small continental blocks: the Eastern and Western Blocks. As one of the largest exposure in the central part of the orogen, the Hengshan–Wutai–Fuping Complexes consist of four lithotectonic units: the Wutai, Hengshan and Fuping Complexes and the Hutuo Group. The Hengshan Complex contains high pressure mafic granulites and retrograded eclogites. Structural analysis indicates that most of the rocks in these complexes underwent three distinct episodes of folding (D1 to D3) and two stages of ductile thrust shearing (STZ1 between D1 and D2 and STZ2 after D3). The D1 deformation formed penetrative axial planar foliations (S1), mineral stretching lineations (L1), and rarely-preserved small isoclinal folds (F1) in the Hengshan and Fuping Complexes. In the Wutai Complex, however, large-scale F1 recumbent folds with SW-vergence are displayed by sedimentary compositional layers. Penetrative transposition resulted in stacking of thrust sheets which are separated by ductile shear zones (STZ1). The kinematic indicators of STZ1 in the Hengshan and Wutai Complexes show top-to-the-S230°W thrusting likely related to northeastward, oblique pre-collisional subduction. D1 resulted in crustal thickening with resultant prograde peak metamorphism. The Hutuo Group did not undergo the D1 deformation, either because sedimentation was coeval with the D1 deformation or because it was at a high structural level and was not influenced directly by the early deformation. The D2 deformation produced NW-verging asymmetric and recumbent folds. The D2 deformation is interpreted to have resulted from collision between the Eastern and Western Blocks of the North China Craton. In the Hutuo Group and the Fuping Complex, the development of ESE-verging asymmetric tight folds is associated with D2. The structural pattern resulting from superimposition of D1 and D2 is a composite synform in the Hengshan–Wutai–Fuping Complexes. All four lithotectonic units were superposed during the later D3 deformation. The D3 deformation developed NW-trending open upright folds. Ongoing collision led to development of transpressional ductile shearing (STZ2), forming the transpressional Zhujiafang dextral ductile shear zone between the northern Hengshan Complex and the southern Hengshan Complex, and generating the sinistral Longquanguan ductile shear zone between the Fuping Complex and the Wutai Complex, respectively. The STZ1 and D2 deformation were possibly responsible for fast syn-collisional exhumation of the high pressure mafic granulites and retrograded eclogites. The structural patterns and elucidation of the deformation history of the Hengshan–Wutai–Fuping Complexes places important constraints on the tectonic model suggesting that an oceanic lithosphere between the Eastern and Western Blocks underwent northeastward-directed oblique subduction beneath the western margin of the Eastern Block, and that the final closure of this ocean led to collision between the two blocks to form the coherent basement of the North China Craton.  相似文献   

12.
The Luning–Fencemaker fold-thrust belt (LFTB) of central Nevada reflects major Mesozoic shortening in the western US Cordillera, and involved contractional deformation in Triassic and lower Jurassic back-arc basinal strata. Structural analyses in the Santa Rosa Range, in the northern LFTB, provide new insight into the evolution of this belt. Four phases of deformation are recognized in the Santa Rosa Range. D1 involved tight to isoclinal folding, cleavage development under low-grade metamorphic conditions, and reverse faulting. This deformation phase reflects NW–SE shortening of 55–70% in the Early and/or Middle Jurassic. D2 structures are similar in orientation to D1 but involved much less overall strain and are well developed only to the southeast. D2 appears to be related to thrusting along the eastern margin of the LFTB in the Middle and/or Late Jurassic. D3 deformation reflects very minor shortening (<5%) in a subvertical direction, and is tentatively interpreted to reflect stresses generated during initial intrusion of mid-Cretaceous plutons in the area. D4 deformation demonstrably occurred synchronously with emplacement of Cretaceous granitoids dated at 102 Ma (U–Pb zircon) based on syntectonic relations between D4 structures and thermal metamorphism associated with intrusion, and an upgrade in D4 strain in the thermally softened metamorphic aureoles of the intrusions. This last phase of deformation reflects minor regional NE–SW shortening, coupled with localized strain associated with pluton emplacement.Formation of the LFTB structural province was accomplished during the D1 and D2 phases of deformation, and most shortening occurred during the D1 event. This Jurassic deformation led to structural closure of the back-arc basin by top-to-the-SE tectonic transport and development of a largely ductile fold-thrust belt. Subsequent deformation (D3 and D4) is >50 m.y. younger and unrelated to development of the LFTB. The younger deformation reflects a combination of minor regional shortening, interpreted to be related to the Cretaceous Sevier orogeny, plus localized shortening related to emplacement of Cretaceous intrusions.  相似文献   

13.
The Paleoproterozoic Liaohe assemblage and associated Liaoji granitoids represent the youngest basement in the Eastern Block of the North China Craton. Various structural elements and metamorphic reaction relations indicate that the Liaohe assemblage has experienced three distinct deformational events (D1 to D3) and four episodes of metamorphism (M1 to M4). The earliest greenschist facies event (M1) is recognized in undeformed or weakly deformed domains wrapped by the S1 schistosity, suggesting that M1 occurred before D1. The D1 deformation produced small, mostly meter-scale, isoclinal and recumbent folds (F1), an associated penetrative axial planar schistosity (S1), a mineral stretching lineation (L1) and regional-scale ductile shear zones. Concurrent with D1 was M2 metamorphism, which occurred before D2 and produced low- to medium-pressure amphibolite facies assemblages. Regionally divergent motion senses reflected by the asymmetric F1 folds and other sense-of-shear indicators, together with the radial distribution of the L1 lineation surrounding the Liaoji granitoids, imply that D1 represents an extensional event. The D2 deformation produced open to tight F2 folds of varying scales, S2 axial crenulation cleavages and ENE-NE-striking thrust faults, involving broadly NW–SE compression. Following D2 was M3 metamorphism that led to the formation of sillimanite and cordierite in low-pressure type rocks and kyanite in medium-pressure rocks. The last deformational event (D3) formed NW-WNW-trending folds (F3), axial planar kink bands, spaced cleavages (S3), and strike–slip and thrust faults, which deflect the earlier D1 and D2 structures. D3 occurred at a shallow crustal level and was associated with, or followed by, a greenschist facies retrograde metamorphic event (M4).The Liaohe assemblage and associated Liaoji granitoids are considered to have formed in a Paleoproterozoic rift, the late spreading of which led to the occurrence of the early extensional deformation (D1) and the M1 and M2 metamorphism, and the final closing of which was associated with the D2 and D3 phases of deformation and M3 and M4 metamorphism.  相似文献   

14.
Quartz c axis fabrics and microstructures have been investigated within a suite of quartzites collected from the Loch Eriboll area of the Moine Thrust zone and are used to interpret the detailed processes involved in fabric evolution. The intensity of quartz c axis fabrics is directly proportional to the calculated strain magnitude. A correlation is also established between the pattern of c axis fabrics and the calculated strain symmetry.Two kinematic domains are recognized within one of the studied thrust sheets which outcrops immediately beneath the Moine Thrust. Within the upper and central levels of the thrust sheet coaxial deformation is indicated by conjugate, mutually interfering shear bands, globular low strain detrital quartz grains whose c axes are aligned sub-parallel to the principal finite shortening direction (Z) and quartz c axis fabrics which are symmetric (both in terms of skeletal outline and intensity distribution) with respect to mylonitic foliation and lineation. Non-coaxial deformation is indicated within the more intensely deformed and recrystallized quartzites located near the base of the thrust sheet by single sets of shear bands and c axis fabrics which are asymmetric with respect to foliation and lineation.Tectonic models offering possible explanations for the presence of kinematic (strain path) domains within thrust sheets are considered.  相似文献   

15.
Polyphase deformation chronologies established within the mid-crustal portions of orogenic belts have classically been attributed to regional-scale ‘events’ which generate distinct structural sequences that can be directly correlated across large tracts of the orogenic belt. However, concepts of progressive deformation in which minor structures may be continually generated, amplified and redeformed within a unifying kinematic framework suggest that regional correlation of minor structures is both misguided and misleading. Detailed structural analysis of lower amphibolite facies Dalradian metasediments in north-west Ireland does, however, demonstrate that a coherent and meaningful deformation chronology can be established within the framework of individual fold nappes. Protracted deformation has resulted in the generation of a series of overprinting, secondary structures (D4–D9), which are kinematically linked to the continued structural evolution and south-east directed translation of the crustal-scale (D3) Ballybofey (fold) Nappe. Secondary (D4) crenulation axes initiated at an oblique angle to the direction of nappe transport both rotate and amplify into larger scale folds, which are subparallel to transport and demonstrate successive stages of diachronous folding. Continued nappe-related deformation induces southwards verging contractional (D5) folds, which are particularly well developed and focused into reactivated ductile (D3) thrust zones generated during the initial stages of nappe translation. Subsequent to thickening-induced ductile extension and collapse of the nappe, a return to contractional tectonics is marked by major episodes of broad, open buckle folding developed orthogonal to both the overturned limb (D7) and upper limb (D8) of the nappe. Detailed structural analysis and investigation of secondary folds and overprinting fabrics provides a valuable insight into the protracted kinematic evolution of major fold nappes.  相似文献   

16.
The Caprauna-Armetta Unit (CAU) is a Briançonnais cover nappe emplaced on the external margin of the Ligurian Briançonnais Zone. A structural analysis of the nappe indicates that there are four superposed deformations (D1-D4). D1 produced large recumbent isoclinal folds associated with a strong axial-plane cleavage and a SW-trending lineation. These folds can be related to a SW-directed overthrust shear. D2 produced open to moderately tight folds with subvertical axial planes, overturned towards the northeast. D3 and D4 are represented by large wavelength open folds affecting only the large-scale setting of the nappe.A finite strain map of the nappe has been compiled using data from an oolitic limestone layer. The measured strains appears to be essentially the product of the D1 phase. The measured ellipsoids are generally triaxial. The trend of the finite strain X axes is towards the southwest. Prolate ellipsoids with very high Rxz ratios occur on the inverted limbs and sometimes near the hinge zones of the anticlinal F1 folds. Oblate ellipsoids are prevalent on the normal limbs. This pattern of finite strain resulted from deformation in a ductile shear zone generated within the tectonic units trailed at the base of the huge Helminthoid Flysch Nappe during its motion towards the foreland.  相似文献   

17.
The NW–SE Irtysh Shear Zone is a major tectonic boundary in the Central Asian Orogenic Belt (CAOB), which supposedly records the amalgamation history between the peri-Siberian orogenic system and the Kazakhstan/south Mongolia orogenic system. However, the tectonic evolution of the Irtysh Shear Zone is not fully understood. Here we present new structural and geochronological data, which together with other constraints on the timing of deformation suggests that the Irtysh Shear Zone was subjected to three phases of deformation in the late Paleozoic. D1 is locally recognized as folded foliations in low strain areas and as an internal fabric within garnet porphyroblasts. D2 is represented by a shallowly dipping fabric and related ∼ NW–SE stretching lineations oriented sub-parallel to the strike of the orogen. D2 foliations are folded by ∼ NW–SE folds (F3) that are bounded by a series of mylonite zones with evidence for sinistral/reverse kinematics. These fold and shear structures are kinematically compatible, and thus interpreted to result from a transpressional deformation phase (D3). Two samples of mica schists yielded youngest detrital zircon peaks at ∼322 Ma, placing a maximum constraint on the timing of D1–D3 deformation. A ∼ NE–SW granitic dyke swarm (∼252 Ma) crosscuts D3 fold structures and mylonitic fabrics in the central part of the shear zone, but is displaced by a mylonite zone that represents the southern boundary of the Irtysh Shear Zone. This observation indicates that the major phase of D3 transpressional deformation took place prior to ∼252 Ma, although later phases of reactivation in the Mesozoic and Cenozoic are likely. The late Paleozoic deformation (D1–D3 at ∼322–252 Ma) overlaps in time with the collision between the Chinese Altai and the intra-oceanic arc system of the East Junggar. We therefore interpret that three episodes of late Paleozoic deformation represent orogenic thickening (D1), collapse (D2), and transpressional deformation (D3) during the convergence between the Chinese Altai and the East Junggar. On a larger scale, late Paleozoic sinistral shearing (D3), together with dextral shearing farther south, accommodated the eastward migration of internal segments of the western CAOB, possibly associated with the amalgamation of multiple arc systems and continental blocks during the late Paleozoic.  相似文献   

18.
In the Sambagawa schist, southwest Japan, while ductile deformation pervasively occurred at D1 phase during exhumation, low-angle normal faulting was locally intensive at D2 phase under the conditions of frictional–viscous transition of quartz (c. 300 °C) during further exhumation into the upper crustal level. Accordingly, the formation of D2 shear bands was overprinted on type I crossed girdle quartz c-axis fabrics and microstructures formed by intracrystalline plasticity at D1 phase in some quartz schists. The quartz c-axis fabrics became weak and finally random with increasing shear, accompanied by the decreasing degree of undulation of recrystallized quartz grain boundaries, which resulted from the increasing portion of straight grain boundaries coinciding with the interfaces between newly precipitated quartz and mica. We interpreted these facts as caused by increasing activity of pressure solution: the quartz grains were dissolved mostly at platy quartz–mica interface, and precipitated with random orientation and pinned by mica, thus having led to the obliteration of existing quartz c-axis fabrics. In the sheared quartz schist, the strength became reduced by the enhanced pressure solution creep not only due to the reduction of diffusion path length caused by increasing number of shear bands, but also to enhanced dissolution at the interphase boundaries.  相似文献   

19.
Abstract The mid-Tertiary blueschists, eclogites and eclogitic gneisses of northern New Caledonia are the products of four phases of regional metamorphism and deformation (D1–D4). Omphacite, lawsonite and Mn-rich garnet isogradic surfaces were developed during the second deformation (D2) under prograde pressure and temperature conditions. Subsequent deformations (D3–D4) folded these D2 isogradic surfaces. However, within the P-retrograde, T-prograde metamorphic environment of the D4 phase, omphacite altered to albite and chlorite; as a result, a late-stage sub-horizontal isogradic surface developed for omphacite-out where this mineral preserved as relics within syn-D4 albite porphyroblasts. Other minerals that crystallized for the first time (epidote) or had rim additions (almandine phengite) during D4, also form nearly horizontal isogradic surfaces. Porphyroblastic garnet and albite contain inclusion trails, which allow their microstructural development and crystallization of the matrix to be traced from D2 to D4. Late syn-D4 the temperature increased markedly in association with an extensive exothermic decarbonation, even though the rocks were in a state of pressure retrogression. This caused considerable neocrystallization, recrystallization and growth of mattix and porphyroblasts such that, although S2 foliation crenulated by D3 and D4 is readily observable, almost all signs of stored strain due to D3 and D4 have been removed, and the deeper schists and eclogitic gneisses superficially appear to have undergone a drastic annealing recrystallization, post-dating deformation.  相似文献   

20.
The amphibolite facies Puolankajärvi Formation (PjF) occupies the western margin of the Early Proterozoic Kainuu Schist Belt (KSB) of northern Finland. The lower and middle parts of the PjF consist of turbiditic psammites and pelites and tempestitic semipelites. This report concentrates on the pelitic lithologies which include quartz–two-mica–plagioclase schists with variable amounts of garnet, staurolite, andalusite and biotite porphyroblasts as well as sillimanite and cordierite segregations. The KSB forms a major north–south-trending synclinorium between two Archaean blocks. It contains both autochthonous and allochthonous units and is cut by faults and shear zones. The PjF lies on the western side of the KSB and is probably allochthonous. The formation has undergone six major deformation phases (D1, D2, D3a, D3b, D4 and D5). During D3a-D5 the maximum principal stress (σ1) changed in a clockwise direction from south-west to north-east. Between D2 and D3 the intermediate principal stress (σ2) changed from horizontal to vertical and the interval between D2 and D3 marks a transition from thrust to strike-slip tectonics. Relict structures in the porphyroblasts indicate the following mineral growth–deformation evolution in the PjF. (1) Throughout the PjF there was a successive crystallization of garnet (syn-D1), poryphyroblastic biotite (inter-D3/4) and staurolite (inter-D3/4) during the pre-D4 stage. (2) A syn-D4-inter-D4/5 crystallization of kyanite, sillimanite (fibrolite), porphyroblastic tourmaline, magnetite, rutile, cordierite and muscovite–biotite–plagioclase pseudomorphs after staurolite was most localized at and near D4 shear zones. (3) A syn- to post-D5 generation of andalusite, ilmenohematite and sheet silicates after staurolite and after cordierite occurred near D5 faults. The evolution outlined here permits the relative dating of the PjF parageneses, which is used in the second part of the study (Tuisku & Laajoki, 1990), and, together with the knowledge of the pressure–temperature conditions during various growth events, makes it possible to compile pressure–temperature–deformation paths for the PjF.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号