首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The essential difference in the formation of conjugate shear zones in brittle and ductile deformation is that the intersection angle between brittle conjugate faults in the contractional quadrants is acute(usually ~60°) whereas the angle between conjugate ductile shear zones is obtuse(usually 110°). The Mohr-Coulomb failure criterion, an experimentally validated empirical relationship, is commonly applied for interpreting the stress directions based on the orientation of the brittle shear fractures. However, the Mohr-Coulomb failure criterion fails to explain the formation of the low-angle normal fault, high-angle reverse fault, and the conjugate strike-slip fault with an obtuse angle in the σ1 direction. Although it is ten years since the Maximum-Effective-Moment(MEM) criterion was first proposed, and increasingly solid evidence in support of it has been obtained from both observed examples in nature and laboratory experiments, it is not yet a commonly accepted model to use to interpret these antiMohr-Coulomb features that are widely observed in the natural world. The deformational behavior of rock depends on its intrinsic mechanical properties and external factors such as applied stresses, strain rates, and temperature conditions related to crustal depths. The occurrence of conjugate shear features with obtuse angles of ~110° in the contractional direction on different scales and at different crustal levels are consistent with the prediction of the MEM criterion, therefore ~110° is a reliable indicator for deformation localization that occurred at medium-low strain rates at any crustal levels. Since the strain–rate is variable through time in nature, brittle, ductile, and plastic features may appear within the same rock.  相似文献   

2.
1 Introduction A high-level generalization of structures in the earth crust has been given by Ramsay (1980): low-angle thrusts in the brittle upper crust and high-angle reverse shear zones in the ductile middle-lower crust are formed in contractional regimes; high-angle normal faults in the brittle upper crust and low-angle normal shear zones in the ductile middle- lower crust are formed in extensional regimes. The formation of low-angle thrusts and high-angle normal faults in brittle domains …  相似文献   

3.
Transpressional deformation has played an important role in the late Neoproterozoic evolution of the ArabianNubian Shield including the Central Eastern Desert of Egypt. The Ghadir Shear Belt is a 35 km-long, NW-oriented brittleductile shear zone that underwent overall sinistral transpression during the Late Neoproterozoic. Within this shear belt, strain is highly partitioned into shortening, oblique, extensional and strike-slip structures at multiple scales. Moreover, strain partitioning is heterogeneous along-strike giving rise to three distinct structural domains. In the East Ghadir and Ambaut shear belts, the strain is pure-shear dominated whereas the narrow sectors parallel to the shear walls in the West Ghadir Shear Zone are simple-shear dominated. These domains are comparable to splay-dominated and thrust-dominated strike-slip shear zones. The kinematic transition along the Ghadir shear belt is consistent with separate strike-slip and thrustsense shear zones. The earlier fabric(S1), is locally recognized in low strain areas and SW-ward thrusts. S2 is associated with a shallowly plunging stretching lineation(L2), and defines ～NW-SE major upright macroscopic folds in the East Ghadir shear belt. F2 folds are superimposed by ～NNW–SSE tight-minor and major F3 folds that are kinematically compatible with sinistral transpressional deformation along the West Ghadir Shear Zone and may represent strain partitioning during deformation. F2 and F3 folds are superimposed by ENE–WSW gentle F4 folds in the Ambaut shear belt. The sub-parallelism of F3 and F4 fold axes with the shear zones may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation in fold zones. Dextral ENEstriking shear zones were subsequently active at ca. 595 Ma, coeval with sinistral shearing along NW-to NNW-striking shear zones. The occurrence of upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the Ghadir shear belt. Oblique convergence may have been provoked by the buckling of the Hafafit gneiss-cored domes and relative rotations between its segments. Upright folds, fold with vertical axes and sinistral strike-slip shear zones developed in response to strain partitioning. The West Ghadir Shear Zone contains thrusts and strikeslip shear zones that resulted from lateral escape tectonics associated with lateral imbrication and transpression in response to oblique squeezing of the Arabian-Nubian Shield during agglutination of East and West Gondwana.  相似文献   

4.
Quantitative X‐ray maps of composition from a chlorite, K‐white mica, albite, quartz and garnet bearing thin section from a Sambagawa blueschist facies metapelite were combined with a multi‐equilibrium calculation method to calculate a P–T‐Fe3+/Fe2+‐deformation map at the millimetre scale. The studied sample was chosen because elongated chlorite crystallization tails (pressure shadows) rimmed by phengite are present, which is an appropriate assemblage for the quantification of the P–T evolution. Chlorite temperature and Fe3+ content maps were calculated by successive iterations for each pixel analysis of Fe3+ until convergence of the four chlorite‐quartz‐H2O equilibria that can be written using the Fe‐ and Mg‐amesite, clinchlore, daphnite and sudoite chlorite end‐members. The calculated map of Fe2+/Fe3+ in chlorite is in good qualitative agreement with the in situ mapping of this ratio using XANES (X‐ray absorption near edge structure) techniques. The temperature map indicates that high temperature chlorite zones with low Fe3+ contents alternate with lower temperature zones and higher Fe3+ contents in the crystallization tail. Late fractures perpendicular to the elongation axis of the tail are filled by very low temperature chlorite (<250 °C) showing Fe3+/Fetotal up to 0.4. Groups of chlorite and mica pixels were then identified based on compositional and structural criteria, and a P–T‐deformation map was calculated using representative analyses of these groups. The calculated P–T‐deformation map suggests that in contrast to chlorite, the composition of most mica did not change significantly during exhumation. Mica reequilibrated in late EW shear bands only. EW shearing was already active at 0.1 GPa, 500 °C, which corresponds to the peak temperature (and probably pressure) conditions, at reduced redox conditions. The intensity of deformation probably decreased with decrease in temperature to ～350–400 °C. At this temperature, a second main deformation event corresponding to a further EW stretching occurred and was still active below 250 °C and more oxidizing conditions. These results indicate that the scale at which P–T data can be obtained is now close to the scale of observation of structural geologists. A close link between deformation and mineral reaction is therefore possible at the microscopic scale, which provides information about the relationship between deformation and mineral reactivity, the modalities of deformation with time and the P–T conditions at which it occurred.  相似文献   

5.
Field studies in the Palaeoproterozoïc Daléma basin, Kédougou-Kéniéba Inlier, reveal that the main tectonic feature comprises alternating large shear zones relatively well-separated by weakly deformed surrounding rock domains. Analysis of the various structures in relation to this major D2 phase of Eburnean deformation indicates partitioning of sinistral transpressive deformation between domains of dominant transcurrent and dominant compressive deformation. Foliation is mostly oblique to subvertical and trending 0–30° N, but locally is subhorizontal in some thrust-motion shear zones. Foliation planes of shear zones contain a superimposed subhorizontal stretching lineation which in places cross-cuts a steeply plunging stretching lineation which is clearly expressed in the metasedimentary rocks of weakly deformed surrounding domains. In the weakly deformed domains, the subhorizontal lineation is absent, whereas the oblique to subvertical lineation is more fully developed. Finite strain analyses of samples from surrounding both weakly deformed and shearing domains, using finite strain ratio and the Fry method, indicate flattened ellipsoid fabrics. However, the orientation of the long axis (X) of the finite strain ellipsoid is horizontal in the shear zones and oblique within the weakly deformed domains. Exceptionally, samples from some thrust zones indicate a finite strain ellipsoid in triaxial constriction fabrics with a subhorizontal long axis (X). In addition, the analysis of the strain orientation starting from semi-ductile and brittle structures indicates that a WNE–ESE (130° N to 110° N) orientation of strain shortening axis occurred during the Eburnean D2 deformation.  相似文献   

6.
塑性力学的滑移线理论、Watterson零伸长度理论和最大有效力矩准则均获得共轭变形带的夹角为109.4°。该值与黄金规则相容,然而,滑移线理论的预测值面对伸长方向,与实际不符。零伸长度理论所预测的109.4°,不能解释实际观察到的平面共轭剪切带。根据最大有效力矩准则理论,预测韧性变形域共轭变形带面对主压应力方向或瞬时最小伸长度方向的夹角为109.4°。迄今获得的全部野外观测值和岩石力学实验结果均位于该预测值的±20°范围内,证明最大有效力矩准则的有效性。最大有效力矩准则可解释或求解:1)折劈理的形成,2)大型低角度正断层和高角度逆冲断层的形成,3)地震反射剖面中的鳄鱼嘴构造,4)变质结晶基底的基本构造型式——菱网状韧性剪切带,5)拆离褶皱的形成,6)古主应力和相关的运动学涡度。  相似文献   

7.

Granulite facies rocks on Else Platform in the northern Prince Charles Mountains, east Antarctica, consist of metasedimentary gneiss extensively intruded by granitic rocks. The dominant rock type is a layered garnetbiotite‐bearing gneiss intercalated with minor garnet‐cordierite‐sillimanite gneiss and calc‐silicate. Voluminous megacrystic granite intruded early during a mid‐Proterozoic (ca 1000 Ma) granulite event, M1, widely recognized in east Antarctica. Peak metamorphic conditions for M1 are in the range of 650–750 MPa at ～800°C and were associated with the development of a gneissic foliation, S1 and steep east‐plunging lineation, L1. Strain partitioning during progressive non‐coaxial deformation formed large D2 granulite facies south‐dipping thrusts, with a steep, east‐plunging lineation. In areas of lower D2 strain, large‐scale upright, steep east‐plunging fold structures formed synchronously with the D2 high‐strain zones. Voluminous garnet‐bearing leucogneiss intruded at 940 ±20 Ma and was deformed in the D2 high‐strain zones. Textural relationships in pelitic rocks show that peak‐M2 assemblages formed during increasing temperatures via reactions such as biotite + sillimanite + quartz ± plagioclase = spinel + cordierite + ilmenite + K‐feldspar + melt. In biotite‐absent rocks, re‐equilibration of deformed M1 garnet‐sillimanite‐ilmenite assemblages occurred through decompressive reactions of the form, garnet + sillimanite + ilmenite = cordierite + spinel + quartz. Pressure/temperature estimates indicate that peak‐M2 conditions were 500–600 MPa and 700±50°C. At about 500 Ma, north‐trending granitic dykes intruded and were deformed during D3‐M3 at probable upper amphibolite facies conditions. Cooling from peak D3‐M3 conditions was associated with the formation of narrow greenschist facies shear zones, and the intrusion of pegmatite. Cross‐cutting all features are abundant north‐south trending alkaline mafic dykes that were emplaced over the interval ca 310–145 Ma, reflecting prolonged intrusive activity. Some of the dykes are associated with steeply dipping faults that may be related to basin formation during Permian times and later extension, synchronous with the formation of the Lambert Graben in the Cretaceous.  相似文献   

8.
A variety of unusual early post‐depositional deformation structures exist in grainstone and flat‐pebble conglomerate beds of Upper Cambrian strata, western Colorado, including slide scarps, thrusted beds, irregular blocks and internally deformed beds. Thrusted beds up to tens of centimetres thick record thrust movement of a part of a bed onto itself along a moderate to steeply inclined (15° to 40°) ramp, locally producing hanging wall lenses with fault‐bend geometries. Thrust plane orientations are widely distributed, and in some cases nearly oppositely oriented in close proximity, indicating that they did not form as failures acted upon by gravity forces. Irregular bedded to internally deformed blocks are isolated on generally flat upper bedding surfaces. These features represent parts of beds that detached, moved up onto and some distances across, the laterally adjacent undisturbed bed surfaces. Deformation of thin intervals of mud on the ocean floor by moving blocks rules out the possibility of storm‐induced deformation, because the mud was not eroded by high shear stresses that would accompany the extremely large forces required to produce and move the blocks. Finally, internally deformed beds are characterized by large blocks, fitted fabrics of highly irregular fragments and contorted lamination, which represent heterogeneous deformation, such as brecciation and liquefaction. The deformation structures were produced by earthquakes linked to the reactivation of Mesoproterozoic, crustal‐scale shear zones in the central Rockies during the Late Cambrian. Analysis of the deformation structures indicates very large body forces and calculated earthquake‐generated ground motion velocities of ca 1·6 m sec?1. These correspond to moment magnitudes of ca 7·0 or more and a Mercalli Intensity of X+. These are the only known magnitude estimates of Phanerozoic (other than Quaternary) large‐intensity earthquakes for the Rocky Mountain region, and they are as large as, or larger than, previous estimates of Proterozoic earthquakes along these major shear zones of the central Rockies.  相似文献   

9.
秦岭商丹构造带内发育的晚三叠世沙沟街韧性剪切带蕴含大量地质信息,很好地记录了秦岭印支期碰撞造山过程。为了探究该剪切带的运动学特征及其动力学背景,在野外观测、显微构造分析的基础上,对其中发育的糜棱岩进行了磁组构和运动学涡度研究。岩石磁学和磁组构分析结果显示:样品的平均磁化率Km值总体较高,载磁矿物主要为磁铁矿等铁磁性矿物;磁化率各向异性度PJ值较大,表明构造变形较为强烈;形态参数T值多大于0,反映磁化率椭球体以扁球体为主;磁线、面理优势产状与野外观测到的矿物线、面理较为一致。结合磁组构、边界断层以及C面理产状,认为沙沟街韧性剪切带具有左行走滑挤压的运动学特征。运动学涡度Wk值及其分布特征表明,沙沟街剪切带中纯剪切作用所占的比重总体大于简单剪切作用,并且剪切带的核部应位于北界断层附近。综合分析认为,沙沟街韧性剪切带的运动学特征反映了总体斜向汇聚背景下的局部走滑挤压,与商丹带西段发育的同期韧性剪切带具有完全反向的运动学指向,这可能与碰撞导致的侧向挤出构造有关  相似文献   

10.
《Journal of Structural Geology》2001,23(6-7):1043-1065
Transpressive deformation was distributed heterogeneously within the Central Maine belt shear zone system, which formed in response to Early Devonian oblique convergence during the Acadian orogeny in the northern Appalachians. ‘Straight’ belts are characterized by tight folds, S>L fabrics and sub-parallel form lines, and asymmetric structures that together indicate dextral–SE-side-up kinematics. In contrast, intervening zones between ‘straight’ belts are characterized by open folds and L≫S fabrics. Within both types of zone, metasedimentary rocks have fabrics defined by the same minerals at the same metamorphic grade, including a penetrative, moderately to steeply NE-plunging mineral lineation. Thus, we interpret accumulation of plastic deformation and regional metamorphic (re-) crystallization to have been synchronous across the Central Maine belt shear zone system. Discordance between inclusion trails in regionally developed porphyroblasts of garnet and staurolite and matrix fabrics in ‘straight’ belt rocks records shortening by tightening of folds and greater reorientation of matrix fabrics with respect to porphyroblasts. Kinematic partitioning of flow was responsible for the contrasting states of finite deformation recorded in the Central Maine belt shear zone system. Perturbations in the flow were caused by serially developed thrust-ramp anticlines in the stratigraphic succession immediately above the Avalon-like basement, at which décollement of the shear zone system was initially rooted. General shear deformation at the ramps involved strain softening with an enhanced component of noncoaxial flow. In contrast, deformation during extrusion in the intervening zones involved strain hardening with a greater component of coaxial flow. Part of the thickening stratigraphic succession exceeded Tsolidus, reflected by the occurrence of migmatites and granites. The latter were partly sourced from the underlying Avalon-like basement that was involved in the deformation and melting.  相似文献   

11.
Although calcite tectonites are widespread in nature their use to quantify flow vorticity is limited. We use new (micro-)structural, petrofabric and vorticity data to analyse the kinematics of flow in outcrop-scale calcite mylonite zones. These zones are genetically related to a crustal-scale NE-directed ductile thrust (Basal Thrust) that emplaced the Blueschist over the Basal unit during the exhumation of the Attico-Cycladic Massif. Calcite microstructures reveal that the last stage of deformation occurred at temperatures 200–300 °C achieved by mild heating, which is possibly related with the reburial of the Basal Thrust's footwall. Vorticity analyses were based on the degree of asymmetry of calcite c-axis fabrics as well as on the assumption that the orientation of the long axes of calcite neoblasts within an oblique foliation delineates the direction of instantaneous stretching axis. Both methodological approaches provide consistent estimates with a simple shear component between 55% and 82% (Wn = 0.76–0.96). The use of the stress axis (σ1) orientation recorded by twin-c-axis-pairs to quantify vorticity generally gives significantly lower simple shear component. Comparison of our vorticity estimates with previous estimates inferred from quartz fabrics and rigid porphyroclasts reveals that exhumation-related deformation in the nappe pile was steady state.  相似文献   

12.
Metre to tens‐of‐metre wide, steeply dipping, greenschist facies shear zones that cut blueschists and eclogites of the Combin and Zermatt–Saas Zones at Täschalp and in adjacent areas of the western Alps were sites of extensive recrystallization driven by fluid flow and deformation. Rb–Sr data imply that these shear zones formed at 42–37 Ma with a systematic younging of structures northward toward, and into, the hangingwall of the Mischabel Structure. Shearing commenced at 400–475 °C and 400–500 MPa and continued as pressures and temperatures fell to 300–350 °C and 300–350 MPa. Individual shear zones were active for 2–3 Myr with later lower grade stages of shearing concentrated into narrow zones. Fluids that infiltrated the shear zones were water rich (XH2O > 0.9). Alteration zones around albite veins and at the margins of serpentinite bodies are penecontemporaneous with these shear zones and formed at approximately the same conditions. The eclogites were exhumed from c. 64 km at 44 Ma to 14–16 km at 42–41 Ma implying exhumation rates of 2–5 cm yr?1. Rapid exhumation was probably achieved by extension aided by buoyancy, following subduction of continental crust, and rapid erosion. The shear zones form part of a regional‐scale extensional system responsible for a significant portion of the exhumation of the subducted oceanic crust.  相似文献   

13.
The wedge‐shaped Moornambool Metamorphic Complex is bounded by the Coongee Fault to the east and the Moyston Fault to the west. This complex was juxtaposed between stable Delamerian crust to the west and the eastward migrating deformation that occurred in the western Lachlan Fold Belt during the Ordovician and Silurian. The complex comprises Cambrian turbidites and mafic volcanics and is subdivided into a lower greenschist eastern zone and a higher grade amphibolite facies western zone, with sub‐greenschist rocks occurring on either side of the complex. The boundary between the two zones is defined by steeply dipping L‐S tectonites of the Mt Ararat ductile high‐strain zone. Deformation reflects marked structural thickening that produced garnet‐bearing amphibolites followed by exhumation via ductile shearing and brittle faulting. Pressure‐temperature estimates on garnet‐bearing amphibolites in the western zone suggest metamorphic pressures of ～0.7–0.8 GPa and temperatures of ～540–590°C. Metamorphic grade variations suggest that between 15 and 20 km of vertical offset occurs across the east‐dipping Moyston Fault. Bounding fault structures show evidence for early ductile deformation followed by later brittle deformation/reactivation. Ductile deformation within the complex is initially marked by early bedding‐parallel cleavages. Later deformation produced tight to isoclinal D2 folds and steeply dipping ductile high‐strain zones. The S2 foliation is the dominant fabric in the complex and is shallowly west‐dipping to flat‐lying in the western zone and steeply west‐dipping in the eastern zone. Peak metamorphism is pre‐ to syn‐D2. Later ductile deformation reoriented the S2 foliation, produced S3 crenulation cleavages across both zones and localised S4 fabrics. The transition to brittle deformation is defined by the development of east‐ and west‐dipping reverse faults that produce a neutral vergence and not the predominant east‐vergent transport observed throughout the rest of the western Lachlan Fold Belt. Later north‐dipping thrusts overprint these fault structures. The majority of fault transport along ductile and brittle structures occurred prior to the intrusion of the Early Devonian Ararat Granodiorite. Late west‐ and east‐dipping faults represent the final stages of major brittle deformation: these are post plutonism.  相似文献   

14.
Kilometer-scale, shallowly dipping, NW-striking top-to-the NE reverse and dextral strike-slip shear zones occur in metamorphic rocks of north Golpaygan. These metamorphic rocks are exposed at the NE margin of the central part of the Sanandaj–Sirjan zone in the hinterland of the Zagros orogen. NW-striking top-to-the NE normal shear zones were also found in a small part of the study area. Structural evidence of three deformation stages were found. Pre-mylonitization metamorphic mineral growth happened during D1. The main mylonitization event was during the D2 deformational event, following coaxial refolding, synchronous to retrograde metamorphism of amphibolite to greenschist facies in the Late Cretaceous–Paleocene, and before D3 folding and related mylonitization. We documented the systematic changes in the orientations of D2 linear fabrics especially stretching lineations and superimposition relations of structures. It is concluded that the dextral strike-slip and dip-slip shear zones were coeval kinematic domains of partitioned dextral transpression. The shallowly dipping reverse and strike-slip shear zones are compatible with partitioning in a very inclined transpressional model. Fabric relations reflect that the top-to-the NE normal shear zones were not produced during deformation partitioning of inclined dextral transpression. The Late Cretaceous–Paleocene strain partitioning was followed by later N–S shortening and NE-extension in the north Golpaygan area.  相似文献   

15.
The Karakoram Shear Zone (KSZ) is a northwest-southeast trending dextral ductile shear zone that has mylonitized the Tangste and Darbuk granitoids of the southern margin of the Asian plate. Kinematic vorticity (Wk) has been estimated in 6 mylonitized Tangste granite samples, using Porphyroclast Hyperbolic Distribution (PHD) and Shear Band (SB) Analyses methods on well-developed quartz and feldspar porphyroclasts, and synthetic and antithetic shear bands respectively to visualize the overall deformation of the KSZ. The PHD and SB analyses yield Wk values ranging from Wk=0.29 to 0.43 and 0.45 to 0.93, respectively, thus indicating distinct pure and simple shear dominant regimes during different stages of the evolution of the KSZ. Strain has essentially been pure shear when southern edge of the Asian plate was initially juxtaposed against the Indian plate around 70 Ma, and changed to simple shear, possibly during the reactivation of this shear zone during 21-13 Ma to produce the shear bands.  相似文献   

16.
The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric diagrams and the oblique foliation of recrystallized calcite grains correspond to a top-to-E shearing. Mineral deformation behaviors, twin morphology, C-axis EBSD fabrics, and quartz grain size-frequency diagrams demonstrate that the ductile shear zone was developed under conditions of greenschist facies, with the range of deformation temperatures from 200 to 300°C. These subgrains of host grains and surrounding recrystallized grains, strong undulose extinction, and slightly curved grain boundaries are probably results of intracrystalline deformation and dynamic recrystallization implying that the deformation took place within the dislocation-creep regime at shallow crustal levels. The calculated paleo-strain rates are between 10~(–7.87)s~(–1) and 10~(–11.49)s~(–1) with differential stresses of 32.63–63.94 MPa lying at the higher bound of typical strain rates in shear zones at crustal levels, and may indicate a relatively rapid deformation. The S-L-calcite tectonites have undergone a component of uplift which led to subhorizontal lifting in an already non-coaxial compressional deformation regime with a bulk pure shear-dominated general shear. This E-W large-scale dextral strike-slip movement is a consequence of the eastward extrusion of the Xing'an-Mongolian Orogenic Belt, and results from far-field forces associated with Late Triassic convergence domains after the final closure of the Paleo-Asian Ocean.  相似文献   

17.
Alpine deformation in the Grimsel granodiorite (Aar massif, Central Alps) at greenschist facies conditions (6.5 ± 1 kbar for 450°C ± 25°C) is characterized by the development of a network of centimetre to decametre localized shear zones that surround lenses of undeformed granodiorite. Localization of deformation is assumed to be the result of a first stage of extreme localization on brittle precursors (nucleation stage) followed by a transition to ductile deformation and lateral propagation into the weakly deformed granodiorite (widening stage). A paradox of this model is that the development of the ductile shear zone is accompanied by the crystallization of large amounts of phyllosilicates (white mica and chlorite) that maintains a weak rheology in the localized shear zone relative to the host rock so that deformation is localized and prevents shear zone widening. We suggest that chemical processes, and more particularly, the metamorphic reactions and metasomatism occurring during re‐equilibration of the metastable magmatic assemblage induced shear zone widening at these P–T–X conditions. These processes (reactions and mass transfer) were driven by the chemical potential gradients that developed between the thermodynamically metastable magmatic assemblage at the edge of the shear zone and the stable white mica and chlorite rich ultramylonite formed during the first stage of shear zone due to localized fluid infiltration metasomatism. P–T and chemical potential projections and sections show that the process of equilibration of the wall rocks (μ–μ path) occurs via the reactions: kf + cz + ab + bio + MgO + H2O = mu + q + CaO + Na2O and cz + ab + bio + MgO + H2O = chl + mu + q + CaO + Na2O. Computed phase diagram and mass balance calculations predict that these reactions induce relative losses of CaO and Na2O of ～100% and ～40% respectively, coupled with hydration and a gain of ～140% for MgO. Intermediate rocks within the strain gradient (ultramylonite, mylonite and orthogneiss) reflect various degrees of re‐equilibration and metasomatism. The softening reaction involved may have reduced the strength at the edge of the shear zone and therefore promoted shear zone widening. Chemical potential phase diagram sections also indicate that the re‐equilibration process has a strong influence on equilibrium mineral compositions. For instance, the decrease in Si‐content of phengite from 3.29 to 3.14 p.f.u, when white mica is in equilibrium with the chlorite‐bearing assemblage, may be misinterpreted as the result of decompression during shear zone development while it is due only to syn‐deformation metasomatism at the peak metamorphic condition. The results of this study suggest that it is critical to consider chemical processes in the formation of shear zones particularly when deformation affects metastable assemblages and mass transfer are involved.  相似文献   

18.
3D finite strain analyses and kinematic vorticity measurements were carried out on the Loghon Anticline within the HP‐LT Sanandaj–Sirjan metamorphic belt (Neyriz area, SW Iran). Rƒ/φ and Fry methods were used on the strain markers (e.g. deformed fossils) to interpret geometric relationships between the fold axis, strain ellipsoid axes and shear zone boundaries. The results indicate the predominance of prolate strain in the anticline. Quantitative kinematic analyses show that the Wk parameter is 0. 67 ± 0. 06 (i.e. pure‐shear dominated non‐coaxial flow). This study quantitatively supports the establishment of a dextral transpressive system, which is responsible for the development of the large‐scale right‐lateral shear zones that strike sub‐parallel to the major folds. Flexural shear combined with regional dextral‐shear is suggested to be the most common mechanism of folding in this area. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

19.
The Superior lobe of the Laurentide ice sheet, during its last advance into northwestern Wisconsin, may have moved and transported sediment primarily through deep, widespread shear of its bed to high strains (>100). To study the kinematics of this deformation, we measured the anisotropy of magnetic susceptibility of 3750 intact samples of its basal till—the Douglas member of the Miller Creek formation—collected from eight profiles at 0.2 m depth increments. A benchmark for interpretations was provided by results of ring-shear experiments conducted on the Douglas Till, which provided fabric characteristics for the case of horizontal simple shear. Orientations of maximum susceptibility (k1) were controlled by preferred orientations of silt-sized magnetite grains and were similar to sand-grain orientations measured in thin sections. Strengths of fabrics formed by orientations of k1 indicate that most of the till sampled was deformed but to variable strains. Deformation averaged over the 20 km spanned by the study approximated horizontal simple shear. However, large differences in k1 fabric azimuths (>45°) over lateral distances of meters to tens of meters indicate highly heterogeneous bed deformation, perhaps focused in anastomosing zones with associated divergent and convergent till shear. This interpretation is supported by orientations of principal susceptibilities that imply, in many cases, either that shear planes were steeply dipping, particularly transverse to the shearing direction, or that there were major components of pure shear. Variations in k1 fabric azimuth with depth indicate that most of the till thickness did not shear simultaneously; rather, till accumulated at the bed as shear direction changed in response to temporally shifting zones of shallow deformation (<1 m). This heterogeneous, temporally variable deformation of the bed differs from many applications of the bed-deformation model but is consistent with subglacial measurements at modern glaciers.  相似文献   

20.
Massif type anorthosites at Bolangir, eastern India are emplaced at the vicinity of the proto-Indian craton—Eastern Ghats Granulite belt contact. Micro- and meso-structural evidences indicate that the emplacement of the anorthosite pluton and the adjoining granitoids was syn-tectonic with respect to the D3 deformation phase (950–1,000 Ma) in the host gneiss. Anisotropy of magnetic susceptibility confirms that magnetic fabrics within anorthosite were dominantly developed during D3 deformation. Emplacement of felsic melts in the N-S trending dilatant shear zones in the granitoids, Fe-Ti-Zr-REE rich melt bands along N-S trending shear zones and localized N-S magnetic foliation in anorthosite near the Fe-Ti-Zr-REE rich melt bands indicate change in the stress field from NNW-SSE (D3) to E-W (D4). Available geochronological and paleogeographic data coupled with the structural analyses of the intrusive and the host gneiss indicate that the emplacement of massif type anorthosite in the EGP is not related to the accretion of Eastern Ghats Granulite Belt over proto-Indian continent during late Neoproterozoic.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号