共查询到20条相似文献,搜索用时 31 毫秒
1.
2.
Jianxiu Wang Yansheng Deng Linbo Wu Xiaotian Liu Yao Yin Na Xu 《Arabian Journal of Geosciences》2018,11(18):565
In order to evaluate sandy soil liquefaction, Rock Engineering Systems (RES) was utilized to establish the estimation model of sandy soil liquefaction. Aiming at unascertained factors in the analysis of sandy soil liquefaction evaluation, earthquake magnitude, maximum ground acceleration, the value of standard penetration test, specific penetration resistance, relative density, mean particle size, and water table were selected as influencing factors of sandy soil liquefaction. The interaction matrix was utilized to describe the interaction among the factors. Expert semi-quantitative (ESQ) method was employed to code the interaction matrix. The interaction strength and dominance were analyzed by cause and effect diagram. Finally, the estimation model-based RES was proposed, and the results were in line with actual situation well. In addition, the improved estimation model-based RES was also presented and discussed, which was more convenient with the same prediction accuracy rate. 相似文献
3.
We show that both the mass and composition of dark matter (DM) particles strongly influence the formation of low mass DM halos. Comparison of theoretical predictions with observations allows us to select the more promising DM models. More details can be found in our paper arXiv:1404.3362. 相似文献
4.
Hashiguchi下加载面本构模型是国际上具有较大影响力的超固结土本构模型之一。因此,选取该模型进行理论和构建方法分析,并与UH模型进行对比。对比结果表明,Hashiguchi下加载面模型通过定义单一的数学公式来拟合超固结土内变量的变化规律,从而得到了超固结土应力−应变关系的公式;而统一硬化(unified hardening,简称UH)模型掌握了超固结土体的强度特性,因而能够更准确、合理地描述超固结土的应力−应变关系。相较于Hashiguchi下加载面本构模型,UH模型在理论上更为先进。同时,两个模型的试验预测与试验数据的对比也验证了UH模型在数值计算上的正确性与优越性。 相似文献
5.
基于硬化土模型的小应变本构模型研究 总被引:3,自引:0,他引:3
大量的工程现场监测结果表明,城市中强支护隧道施工过程中其周围大部分土体仍处于小应变状态,小应变情况下土体具有显著的高模量和非线性特性。土体小应变刚度特征和应力路径相关性是准确分析土与隧道相互作用的重要因素。虽然采用双刚度的硬化土模型(hardening soil model)能够基本反映应力路径的影响,但其卸载再加载模量并没有与应力-应变水平相关,不能模拟小应变情况下土体模量的高度非线性。为此,结合小应变刚度理论对硬化土模型的卸载再加载模量进行了改进,使之与应力-应变水平相关,并且考虑了土体卸载抗剪强度指标的变化以及侧向卸荷应力路径下不同的模量。通过与土体的应力路径试验结果进行对比,证明了模型的合理性。 相似文献
6.
基于Burgers模型的岩石非定常蠕变模型 总被引:1,自引:0,他引:1
伯格斯(Burgers)模型适合用来描述岩石第三期以前的蠕变曲线。为了描述整个蠕变过程,可以考虑力学参数的时间效应,用非定常黏壶替换Burgers模型中的定常黏壶,给出一种非定常Burgers模型,并推导出它的蠕变柔量,实验数据拟合表明该模型能较好地反映岩石的试验曲线 相似文献
7.
为提高新安江模型的汇流计算精度并减少经验因素对参数率定的影响,将新安江产流模型与改进的BP汇流模型相耦合,建立XBK(XAJ-BP-KNN)模型。该模型以前期模拟流量和新安江产流模型计算的产流量作为BP网络的输入,出口断面流量作为网络输出,拟合汇流的非线性关系,代替新安江模型的分水源、线性水库及河道马斯京根法的汇流计算;采用相似原理和K-最近邻算法,基于历史样本的模拟误差及相应影响要素对网络输出进行误差修正,实现了无前期实测流量的连续模拟;模型使用SCE-UA算法与遗传早停止LM算法相结合的全局优化方法进行参数优选。在呈村流域的验证表明XBK模型的模拟精度高于新安江模型,全局优化方法能找到最优参数,降低了模型的使用难度。 相似文献
8.
Digital elevation models (DEMs) used in geospatial analysis like the simulation of geophysical flows, such as floods, landslides, and block and ash flows, differ in resolution, acquisition time and generation methodology, which results in varied representation of topographic features. This study investigates the effects of DEMs on the output of a granular flow model, TITAN2D by comparing the output using different DEMs to that obtained with a “true” representation of the terrain, which is considered to be that obtained by using TOPSAR 5 m data. Seven DEMs at four resolutions from four sources were used for Mammoth Mountain, California, a cumulodome volcano. TITAN2D was run for seven different locations of an eruption of a potential dome and two different collapse volumes. The resulting outputs were subsequently compared with TOPSAR 5 m output, and qualitative and statistical inferences were drawn. DEMs with different resolutions and sources generated different outputs that led to different flow maps. For moderate and smaller scale flows ( $\mathcal{O}(10^4)$ m3 – $\mathcal{O}(10^5) \,\text{m}^3$ ), different representations can affect the computation of accurate footprint of the flow and fine DEM resolution is critical for correct characterization of these flows. 相似文献
9.
10.
11.
基于线框架模型的三维地质断层结构模型及其构建技术 总被引:1,自引:0,他引:1
基于地质断层构造的特点,文中提出了一种适合三维断层模拟的数据模型——线框架模型,并基于该数据模型详细描述三维断层结构模型的构建方法,实现了从层面结构的地质模型向块体结构的地质模型进行自动转换的关键算法。线框架模型以方向线框架来表达地质模型的骨架,以方向TIN网来表达地质模型的血肉,具备地质断层结构模型所要表达的各种几何元素与拓扑关系。基于线框架模型的三维地质断层构模技术将地质界面之间的交切在地质界面三角网形成之前就进行处理,将面与面之间的切割操作简化为线与线之间的操作,这种方法不仅能有效地减轻断层地质体构模的复杂程度,而且可以将线与线之间的交线作为地质界面三角网构建时的约束边,从而有效地保证了地质界面之间交切关系的正确性。 相似文献
12.
13.
14.
常规剑桥模型和修正剑桥模型是以正常固结和弱超固结土的三轴试验现象为基础建立起来的,且试样的初始应力状态为各向等压的球应力状态,将模型应用于K0固结状态的原状土必然引起不可忽略的系统误差。基于原状土K0固结线与等倾线之间的关系,在常规剑桥模型的基础上推导并得到了基于K0线的原状土剑桥模型和修正剑桥模型。在主应力空间中,该模型以K0固结线而不是以等倾线为轴线,因而能反映原状土的结构性和各向异性。既有试验数据的验证表明,与常规剑桥模型和修正剑桥模型相比,该模型能更合理的描述原状土的屈服和强度特性。 相似文献
15.
Burgers模型只能描述岩石蠕变的前两个阶段,为了描述蠕变全过程,考虑蠕变参数的时间效应及损伤带来的影响,采用非定常黏性元件取代Burgers模型中串联的定常黏性元件,使其能描述加速蠕变阶段。根据损伤变量的变化特征,假定了一个函数,经过Lemaitre应变等效原理,代入Kelvin模型可得到能描述蠕变衰减阶段的模型。试验数据拟合结果显示,改进的Burgers模型能很好地描述加速蠕变阶段,模型拟合曲线与试验曲线基本吻合,相关系数高,参数取值也在合理范围内;非定常Burgers模型更适合描述不同应力下的岩石蠕变特征曲线。 相似文献
16.
17.
A 480-square-mile region within Will County, in northeastern Illinois, was used as a test region for the development of a methodology to map the sensitivity of aquifers to contamination. An aquifer sensitivity model was developed using a geographic information system (GIS) to overlay and combine several data layers. The components used for our model are: (1) depth to sand and gravel or bedrock, (2) thickness of the uppermost sand and gravel aquifer, (3) glacial drift thickness, and (4) bedrock geology. The model is an improvement over many previous aquifer sensitivity models because it combines specific information on depth to the uppermost aquifer with information on the thickness of the uppermost sand and gravel aquifer. This county-wide model results in an aquifer sensitivity map that can be a useful tool for making land-use planning decisions regarding aquifer protection and management of groundwater resources. 相似文献
18.
In subsurface flow modeling, compositional simulation is often required to model complex recovery processes, such as gas/CO 2 injection. However, compositional simulation on fine-scale geological models is still computationally expensive and even prohibitive. Most existing upscaling techniques focus on black-oil models. In this paper, we present a general framework to upscale two-phase multicomponent flow in compositional simulation. Unlike previous studies, our approach explicitly considers the upscaling of flow and thermodynamics. In the flow part, we introduce a new set of upscaled flow functions that account for the effects of compressibility. This is often ignored in the upscaling of black-oil models. In the upscaling of thermodynamics, we show that the oil and gas phases within a coarse block are not at chemical equilibrium. This non-equilibrium behavior is modeled by upscaled thermodynamic functions, which measure the difference between component fugacities among the oil and gas phases. We apply the approach to various gas injection problems with different compositional features, permeability heterogeneity, and coarsening ratios. It is shown that the proposed method accurately reproduces the averaged fine-scale solutions, such as component overall compositions, gas saturation, and density solutions in the compositional flow. 相似文献
19.
C.C. Harris 《International Journal of Mineral Processing》1976,3(1):9-25
The fraction of solid tracer retained in a laboratory flotation machine is measured as a function of time, simulating semi-batch testing. Observed departures from ideal mixing in which the ratio mean retention time/mean residence time exceeds unity can be accounted for by a recycle model of pulp circulation around the impeller region.Solutions of the system differential equations are recast into forms allowing calculation of the system parameters from the retention time ratio and an initial value, both obtained from tracer experiment data. The effect of changing the parameter values on the model response is discussed. Some special cases, applications, and alternative models are mentioned, and an example is provided.The effects of experimental error on estimated parameter values, and relationships between tracer concentration in the exit stream and the fraction retained formulations, are discussed in appendices. 相似文献
20.
针对干旱地区平原绿洲水土资源利用的特点,建立了以农区土壤水为中心的干旱区平原绿洲散耗型水文模型。散耗型模型考虑了水在不同介质和不同形态之间的交换或转化,并重点考虑人类活动如引水灌溉、地下水的开采等对水平衡的影响。模型把研究区划分为河段、泉井、水库湖泊、农区和非农区五类水均衡模块,水均衡模块之间通过地表渠系、地下水侧渗进行水量交换。应用模型可以对研究区农区、非农区各自的蒸发量、农区向非农区地下水迁移量等干旱区主要水分散耗项进行分析。 相似文献