首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
In this paper, we present a sedimentary and structural analysis that together with maps, sections and new Ar/Ar data enable to describe the tectono-sedimentary evolution of the Mauléon hyper-extended rift basin exposed in the W-Pyrenees. Hyper-extension processes that ultimately resulted in exhuming mantle rocks are the result of the subsequent development of two diachronous detachment systems related to two evolutional stages of rifting. An initial Late Aptian Early Albian crustal thinning phase is first recorded by the development of a crustal necking zone controlled by the north-vergent Southern Mauléon Detachment system. During a subsequent exhumation phase, active faulting migrates to the north with the emplacement of the Northern Mauléon detachment system that exhumed north section thinned continental crust and mantle rocks. This diachronous crustal thinning and exhumation processes are also recorded by the diachronous deposition of syn-tectonic sedimentary tracts above the two supra-detachment sub-basins. Syn-tectonic sedimentary tracts record the progressive exhumation of footwall rocks along detachment systems. Tectonic migration from the southern to the northern Mauléon Detachment system is recorded by the coeval deposition of “sag” deposits above the necking zone basin and of syn-tectonic tracts above exhumed rocks north section. Located on a hanging-wall situation related to the Mauléon hyper-extension structures, the Arzacq Basin also records a major crustal thinning phase as shown by its subsidence evolution so as by deep seismic images. The absence of major top-basement structures and its overall sag morphology suggest that crustal thinning processes occurred by decoupled extension of lower crustal levels contrasting with the Southern Mauléon Detachment system. Reconciling observations from the Mauléon and Arzacq Basins, we finally propose in this paper that they were the result of one and the same asymmetric crustal thinning and exhumation processes, where extension is accommodated into the upper crust in the Mauléon Basin (lower plate basin) and relayed in ductile lower crust below the Arzacq Basin (upper plate basin).  相似文献   

2.
We investigate the factors that control the shortening distribution and its evolution through time in orogenic belts using numerical models. We present self‐consistent high‐resolution numerical models that simulate the inversion of a rift to generate an upper crustal antiformal stack, a wide outer pro‐wedge fold‐and‐thrust belt, characterised by a two‐phase evolution with early symmetric inversion followed by formation of an asymmetric doubly‐vergent orogen. We show that a weak viscous salt décollement promotes gravitational collapse of the cover. When combined with efficient erosion of the orogenic core and sedimentation in adjacent forelands, it ensures the thick‐skinned pro‐wedge taper remains subcritical, promoting formation of an upper crustal antiformal stack. Rift inheritance promotes a two‐phase shortening distribution evolution regardless of the shallow structure and other factors. Comparison to the Pyrenees strongly suggests that this combination of factors led to a very similar evolution and structural style.  相似文献   

3.
In the interior of the Iberian Peninsula, the main geomorphic features, mountain ranges and basins, seems to be arranged in several directions whose origin can be related to the N–S plate convergence which occurred along the Cantabro–Pyrenean border during the Eocene–Lower Miocene time span. The Iberian Variscan basement accommodated part of this plate convergence in three E–W trending crustal folds as well as in the reactivation of two left-lateral NNE–SSW strike-slip belts. The rest of the convergence was assumed through the inversion of the Iberian Mesozoic Rift to form the Iberian Chain. This inversion gave rise to a process of oblique crustal shortening involving the development of two right lateral NW–SE shear zones. Crustal folds, strike-slip corridors and one inverted rift compose a tectonic mechanism of pure shear in which the shortening is solved vertically by the development of mountain ranges and related sedimentary basins. This model can be expanded to NW Africa, up to the Atlasic System, where N–S plate convergence seems also to be accommodated in several basement uplifts, Anti-Atlas and Meseta, and through the inversion of two Mesozoic rifts, High and Middle Atlas. In this tectonic situation, the microcontinent Iberia used to be firmly attached to Africa during most part of the Tertiary, in such a way that N–S compressive stresses could be transmitted from the collision of the Pyrenean boundary. This tectonic scenario implies that most part of the Tertiary Eurasia–Africa convergence was not accommodated along the Iberia–Africa interface, but in the Pyrenean plateboundary. A broad zone of distributed deformation resulted from the transmission of compressive stresses from the collision at the Pyrenean border. This distributed, intraplate deformation, can be easily related to the topographic pattern of the Africa–Eurasia interface at the longitude of the Iberian Peninsula.Shortening in the Rif–Betics external zones – and their related topographic features – must be conversely related to more “local” driven mechanisms, the westward displacement of the “exotic” Alboran domain, other than N–S convergence. The remaining NNW–SSE to NW–SE, latest Miocene up to Present convergence is also being accommodated in this zone straddling Iberia and Morocco, at the same time as a new ill-defined plate boundary that is being developed between Europe and Africa.  相似文献   

4.
We present results from a 484 km wide-angle seismic profile acquired in the northwest part of the South China Sea (SCS) during OBS2006 cruise. The line that runs along a previously acquired multi-channel seismic line (SO49-18) crosses the continental slope of the northern margin, the Northwest Subbasin (NWSB) of the South China Sea, the Zhongsha Massif and partly the oceanic basin of the South China Sea. Seismic sections recorded on 13 ocean-bottom seismometers were used to identify refracted phases from the crustal layer and also reflected phases from the crust-mantle boundary (Moho). Inversion of the traveltimes using a simple start model reveals crustal images in the study area. The velocity model shows that crustal thickness below the continental slope is between 14 and 23 km. The continental part of the line is characterized by gentle landward mantle uplift and an abrupt oceanward one. The velocities in the lower crust do not exceed 6.9 km/s. With the new data we can exclude a high-velocity lower crustal body (velocities above 7.0 km/s) at the location of the line. We conclude that this part of the South China Sea margin developed by a magma-poor rifting. Both, the NWSB and the Southwest Sub-basin (SWSB) reveal velocities typical for oceanic crust with crustal thickness between 5 and 7 km. The Zhongsha Massif in between is extremely stretched with only 6–10 km continental crust left. Crustal velocity is below 6.5 km/s; possibly indicating the absence of the lower crust. Multi-channel seismic profile shows that the Yitongansha Uplift in the slope area and the Zhongsha Massif are only mildly deformed. We considered them as rigid continent blocks which acted as rift shoulders of the main rift subsequently resulting in the formation of the Northwest Sub-basin. The extension was mainly accommodated by a ductile lower crustal flows, which might have been extremely attenuated and flow into the oceanic basin during the spreading stage. We compared the crustal structures along the northern margin and found an east-west thicken trend of the crust below the continent slope. This might be contributed by the east-west sea-floor spreading along the continental margin.  相似文献   

5.
The extensional architecture of the Northern Carnarvon Basin can be explained in terms of changes in lithospheric rheology during multiphase extension and lower crustal flow. Low‐angle detachments, while playing a minor role, are not considered to have been the primary mechanism for extension as suggested in previous models. Early extension (Cambrian‐Ordovician) in the Northern Carnarvon Basin is characterised by low‐angle detachment structures of limited regional extent. These structures have a spatial association with a Proterozoic mobile belt on the margin of the Pilbara Craton. Thermo‐mechanical conditions in the mobile belt may have predisposed the highly deformed crust to thin‐skinned extension and detachment development. Permo‐Carboniferous extension generated an extensive wide rift basin, suggesting ductile rheologies associated with intermediate lithospheric temperatures and crustal thickness. Thick Upper Permian to Upper Triassic post‐rift sequences and marked thinning of the lower crust occurred in association with only a small amount of extension in the upper crust. This observation can be reconciled by considering outward lower crustal flow, from beneath the basin towards the basin margin, following extension. Strong mid‐crustal reflectors, which occur over large areas of the Northern Carnarvon Basin, probably represent a boundary between flow and non‐flow regimes rather than detachment fault surfaces as in previous models. Crustal thinning and thermal decay following Permo‐Carboniferous extension contributed to the increased strength and brittle behaviour of the lithosphere. Consequently, Late Triassic to Early Cretaceous extension resulted in the development of far more localised narrow rift systems on the margins of the preceding wide rift basin. Diapiric intrusions are associated with the narrow rift basin development, resulting from either remobilisation of ductile lower crustal rock or the initial formation of sea‐floor spreading centres.  相似文献   

6.
The evolution of the European Cenozoic Rift System (ECRIS) and the Alpine orogen is discussed on the base of a set of palaeotectonic maps and two retro-deformed lithospheric transects which extend across the Western and Central Alps and the Massif Central and the Rhenish Massif, respectively.During the Paleocene, compressional stresses exerted on continental Europe by the evolving Alps and Pyrenees caused lithospheric buckling and basin inversion up to 1700 km to the north of the Alpine and Pyrenean deformation fronts. This deformation was accompanied by the injection of melilite dykes, reflecting a plume-related increase in the temperature of the asthenosphere beneath the European foreland. At the Paleocene–Eocene transition, compressional stresses relaxed in the Alpine foreland, whereas collisional interaction of the Pyrenees with their foreland persisted. In the Alps, major Eocene north-directed lithospheric shortening was followed by mid-Eocene slab- and thrust-loaded subsidence of the Dauphinois and Helvetic shelves. During the late Eocene, north-directed compressional intraplate stresses originating in the Alpine and Pyrenean collision zones built up and activated ECRIS.At the Eocene–Oligocene transition, the subducted Central Alpine slab was detached, whereas the West-Alpine slab remained attached to the lithosphere. Subsequently, the Alpine orogenic wedge converged northwestward with its foreland. The Oligocene main rifting phase of ECRIS was controlled by north-directed compressional stresses originating in the Pyrenean and Alpine collision zones.Following early Miocene termination of crustal shortening in the Pyrenees and opening of the oceanic Provençal Basin, the evolution of ECRIS was exclusively controlled by west- and northwest-directed compressional stresses emanating from the Alps during imbrication of their external massifs. Whereas the grabens of the Massif Central and the Rhône Valley became inactive during the early Miocene, the Rhine Rift System remained active until the present. Lithospheric folding controlled mid-Miocene and Pliocene uplift of the Vosges-Black Forest Arch. Progressive uplift of the Rhenish Massif and Massif Central is mainly attributed to plume-related thermal thinning of the mantle-lithosphere.ECRIS evolved by passive rifting in response to the build-up of Pyrenean and Alpine collision-related compressional intraplate stresses. Mantle-plume-type upwelling of the asthenosphere caused thermal weakening of the foreland lithosphere, rendering it prone to deformation.  相似文献   

7.
Metamorphic core complexes are usually thought to be associated with regional crustal extension and crustal thinning, where deep crustal material is exhumed along gently dipping normal shear zones oblique to the regional extension direction. We present a new mechanism whereby metamorphic core complexes can be exhumed along crustal‐scale strike‐slip fault systems that accommodated crustal shortening. The Qazaz metamorphic dome in Saudi Arabia was exhumed along a gently dipping jog in a crustal‐scale vertical strike‐slip fault zone that caused more than 25 km of exhumation of lower crustal rocks by 30 km of lateral motion. Subsequently, the complex was transected by a branch of the strike‐slip fault zone, and the segments were separated by another 30 km of lateral motion. Strike‐slip core complexes like the Qazaz Dome may be common and may have an important local effect on crustal strength.  相似文献   

8.
The lithospheric strike‐slip Altyn Tagh Fault has accommodated hundreds of kilometres of displacement between the Qaidam and Tarim blocks since its Eocene reactivation. However, the way the deformation is accommodated in the Qilian Shan and further east remains uncertain. Based on 360 km of north‐eastward migration of the relatively rigid Qaidam block along the Altyn Tagh Fault and 3D isovolumetric balancing of the crustal deformation within the Altyn Tagh Fault–Qilian Shan system, we demonstrate that 250 ± 28 km (43.8–49.4%) of N20E directed crustal shortening and an additional ~250–370 km of eastward motion of the Qilian Shan crust must be accounted for by strike‐slip faulting in the Qilian Shan and crustal thickening in the Qinling area, as well as by extension in the adjoining North China block graben systems.  相似文献   

9.
The evolution and deep structure of the Songliao and Zeya-Bureya basins can be divided into the rift, platform (subsidence), and neotectonic phases. The rift phase (Middle Jurassic-Early Cretaceous) climaxed at the formation of a basin-wide near N-S-oriented rift system, which was followed (Late Cretaceous) by the deposition of the deep-water organic-rich lacustrine source facies with the maximum thickness identified in the Songliao basin (up to 1100 m). The neotectonic phase was marked by the pronounced differences in the basin’s development caused by the formation of a series of E-W-trending transverse structures, which eventually separated the basins, changed the drainage pattern, and blocked the rivers draining southwards from the Zeya-Bureya to the Songliao basin. The differences in the deep structure of the basins are also strongly pronounced. High heat flow values of more than 70 mW/m2 are typical of the Songliao basin, and its mantle heat flow component is higher than the crustal one, as compared to the Zeya-Bureya basin (below 50 mW/m2). The crustal thickness of the Zeya-Bureya basin is higher than that of the Songliao basin (38–42 km and 29–34 km) with a lithospheric thickness of 110–140 km and 50–75 km, respectively. The only exception is the southern Zeya-Bureya basin, which has an electrical structure similar to that of the Songliao basin. These differences have important implications for the evaluation of the hydrocarbon potential of the rift basins. It was suggested that the evaluation of the hydrocarbon potential of the sedimentary basins or parts of these basins should account for two factors: (1) the influence of the lithospheric motions and the related collisional processes and (2) the anomalies in the deep lithospheric structures (the high heat flow and the reduced crustal and lithospheric thickness). The results of this study indicate that the southern part of the Zeya-Bureya basin (in particular, the Lermontovka, Dmitrievka, Mikhailovka, Ekaterinoslavka, and Arkhara troughs) is interpreted to have a fairly high hydrocarbon potential.  相似文献   

10.
李志强  杨波  韩自军  黄振  吴庆勋 《地球科学》2022,47(5):1652-1668
基于Advanced McKenzie地球动力学模型和Easy%RoDL化学动力学模型,建立了南黄海中-新生代（K13-Q）裂谷盆地的构造-热演化史,结合盆地深部壳幔结构、梳理周缘中-新生代板块汇聚与离散过程,讨论了该盆地低地热状态成因、成盆机制和烃源岩热演化.盆地地壳伸展系数约为1.22,岩石圈地幔伸展系数约为1.06;由裂陷期（K13-E2）至今,最高热流值仅由约76 mW/m2降低至约66 mW/m2,最高地温梯度仅由约37 ℃/km降低至约30 ℃/km,首次揭示低地热状态贯穿整个裂谷盆地发育阶段.低岩石圈地幔伸展系数、深部非镜像莫霍面分布、盆地发育阶段仅处于弧后远场拉张应力环境,均指示成盆过程中深部伸展上涌强度低,是导致其持续低地热状态的根本原因,深部热应力不是其主要成盆动力来源;依据高地壳伸展系数和控盆拆离断层演化,认为印支-燕山期先存逆冲断裂复活形成壳间拆离体系,并以简单剪切变形方式控制裂谷盆地发育,是其根本成盆机制;南、北部坳陷烃源岩主排烃期为三垛组二段沉积时期,自渐新世构造反转后热演化终止,古埋深和古地温场条件共同控制现今南、北部坳陷相同深度烃源岩热成熟度差异.   相似文献   

11.

The Cobar Basin in central western New South Wales is a mineral‐rich Early Devonian basin typical of those that characterize the Siluro‐Devonian history of the Lachlan Orogen of southeastern Australia. One hundred and seventy kilometres of seismic profiling in three lines across the basin have shown it to be asymmetrical in shape with an east‐dipping western margin that is steeper than the moderately west‐dipping eastern margin. Maximum basin thickness is around 6 km, but there are significant thickness changes, especially from south to north, which reflect the effect of synsedimentary faulting. Seismic profiling suggests that the basin deformed by thin‐skinned tectonics; postulated strike‐slip effects were not visible on the sections. The seismic profiling has, for the first time, imaged the western synrift basin margin which is generally not exposed. Strain variations during deformation along this edge were taken up by the formation of a major jog ('dog‐leg') which has propagated into the basin as a tear fault. Intrabasinal tears, as well as thrusts, which link into one or more detachments, provide potential pathways for mineralizing fluids during basin inversion.  相似文献   

12.
The northern Fossa Magna (NFM) basin is a Miocene rift system produced in the final stages of the opening of the Sea of Japan. It divides the major structure of Japan into two regions, with north-trending geological structures to the NE of the basin and EW trending structures to the west of the basin. The Itoigawa-Shizuoka Tectonic Line (ISTL) bounds the western part of the northern Fossa Magna and forms an active fault system that displays one of the largest slip rates (4–9 mm/year) in the Japanese islands. Deep seismic reflection and refraction/wide-angle reflection profiling were undertaken in 2002 across the northern part of ISTL in order to delineate structures in the crust, and the deep geometry of the active fault systems. The seismic images are interpreted based on the pattern of reflectors, the surface geology and velocities derived from refraction analysis. The 68-km-long seismic section suggests that the Miocene NFM basin was formed by an east dipping normal fault with a shallow flat segment to 6 km depth and a deeper ramp penetrating to 15 km depth. This low-angle normal fault originated as a comparatively shallow brittle/ductile detachment in a high thermal regime present in the Miocene. The NFM basin was filled by a thick (>6 km) accumulation of sediments. Shortening since the late Neogene is accommodated along NS to NE–SE trending thrust faults that previously accommodated extension and produce fault-related folds on their hanging wall. Based on our balanced geologic cross-section, the total amount of Miocene extension is ca. 42 km and the total amount of late Neogene to Quaternary shortening is ca. 23 km.  相似文献   

13.
The common observation of sedimentary basin inversion in orogenic forelands implies that rifts constitute weak areas of the continental lithosphere. When compressed, the rifts respond with uplift of the deepest parts and erosion of sediments therein. Simultaneously, syn-compressional marginal troughs are formed flanking the inversion zone.Since rifting and subsequent post-rift thermal re-equilibration are processes expected to alter the long-term mechanical state of the lithosphere, the phenomenon of basin inversion is non-trivial from a rheological point of view. Stochastic modelling of the long-term thermal structure beneath sedimentary basins indicates that the crustal part of a rift is warmer, and hence weaker, than the surrounding crustal blocks. In contrast, the mantle part is cold and strong beneath the basin centre.In this paper, it is investigated whether the rifting-induced strength alterations constitute a sufficient condition for a thermally equilibrated rift to invert by compression. Numerical experiments with two-dimensional dynamic thermo-mechanical models are performed. In particular, the focus is on rifting-related mechanical instabilities that reduce the load bearing capacity of the lithosphere. In the experiments, strain-softening behaviour is introduced in the non-associated plasticity model representing brittle yielding. The result is self-consistent large-scale fault formation.The models predict that the rifting-related necking instability induces differential crustal thinning increasing the post-rift crustal weakness. Strain softening and the associated fault formation amplifies the necking instability and introduces zones of structural weakness exposed for compressional re-activation.Under these circumstances, basin inversion follows as a natural consequence of rift compression.  相似文献   

14.
Seismic Features of the Crust-Upper Mantle Beneath Karamay-Kuqa, Xinjiang   总被引：2，自引：0，他引：2  
1. IntoductionSponsored by the National 305 Program, China, a teleseismic experiment was performed jointly by the Chinese Academy of Geological Sciences and the French Scientific Research Center in Tian Shan area from June 1997 to February 1998. The array was mostly deployed along the main road, starting from Karamay in the north to Kuqa in the south. Geologically, the 700 km-long profile covers the Junggar basin, the Tian Shan Mts., the Bo-A Fault and the Korla Fault, ending in nort…  相似文献   

15.
The Buchan Rift, in northeastern Victoria, is a north–south-trending basin, which formed in response to east–west crustal extension in the Early Devonian. The rift is filled mostly with Lower Devonian volcanic and volcaniclastic rock of the Snowy River Volcanics. Although the structure and geometry of the Buchan Rift and its major bounding faults are well mapped at the surface, a discrepancy exists between the surface distribution of the thickest rift fill and its expected potential field response. To investigate this variation, two new detailed land-based gravity surveys, which span the rift and surrounding basement rocks in an east–west orientation, have been acquired and integrated with pre-existing government data. Qualitative interpretation of the observed magnetic data suggests the highly magnetic rocks of the Snowy River Volcanics have a wider extent at depth than can be mapped at the surface. Forward modelling of both land-based gravity data and aeromagnetic data supports this interpretation. With the Snowy River Volcanics largely confined within the Buchan Rift, resolved geometries also allow for the interpretation of rift boundaries that are wider at depth. These geometries are unusual. Unlike typical basin inversions that involve reactivation of rift-dipping faults, the bounding faults of the Buchan Rift dip away from the rift axis and thus appear unrelated to the preceding rifting episode. Limited inversion of previous extensional rift faults to deform the rift-fill sequences (e.g. Buchan Synclinorium) appears to have been followed by the initiation of new reverse faults in outboard positions, possibly because the relatively strong igneous rift fill began to act as a rigid basement ramp during continued E–W crustal shortening in the Middle Devonian Tabberabberan Orogeny. Overthrusting of the rift margins by older sediments and granite intrusions of the adjacent Tabberabbera and Kuark zones narrowed the exposed rift width at surface. This scenario may help explain the steep-sided geometries and geophysical expressions of other rift basins in the Tasmanides and elsewhere, particularly where relatively mechanically strong basin fill is known or suspected.  相似文献   

16.
The Tafilalt is one of a number of generally unexplored sub‐basins in the eastern Anti‐Atlas of Morocco, all of which probably underwent a similar tectono‐stratigraphic evolution during the Palaeozoic Era. Analysis of over 1000 km of 2‐D seismic reflection profiles, with the interpretation of ten regional seismic sections and five isopach and isobath maps, suggests a multi‐phase deformation history for the Palaeozoic‐aged Tafilalt sub‐basins. Extensional phases were probably initiated in the Cambrian, followed by uniform thermal subsidence up to at least the end of the Silurian. Major extension and subsidence did not begin prior to Middle/Upper Devonian times. Extensional movements on the major faults bounding the basin to the north and to the south took place in synchronisation with Upper Devonian sedimentation, which provides the thickest part of the sedimentary sequence in the basin. The onset of the compressional phase in Carboniferous times is indicated by reflectors in the Carboniferous sequence progressively onlapping onto the Upper Devonian sequence. This period of compression developed folds and faults in the Upper Palaeozoic‐aged strata, producing a structural style characteristic of thin‐skinned fold and thrust belts. The Late Palaeozoic units are detached over a regional décollement with a northward tectonic vergence. The folds have been formed by the process of fault‐propagation folding related to the thrust imbricates that ramp up‐section from the décollement. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

17.
From surface and subsurface data, line-length and area balancing were used to construct four balanced and restored sections of the Pyrenees. In the Mesozoic cover, a thin-skinned tectonic model is used. In the basement an anticlinal stack geometry is applied for the foreland part of the thrust nappes. We present and discuss three possible models for the deep structures of the belt: a thin-skinned tectonic model, a thick-skinned tectonic model and an inhomogeneous strain model. The thrusts steepen downwards and the displacements die out in ductile deformation deep in the section. Therefore, we use the inhomogeneous strain model and we equal-area balance the surface of the continental crust.Hanging-wall sequence diagrams are constructed taking into account (1) the strong N-S thickness variations of the Mesozoic cover related to the Cretaceous drift of Spain and (2) the related crustal thinning of the North Pyrenean Zone superimposed upon a previous late Hercynian rise of the lower crust.The Moho step at the vertical of the North Pyrenean Fault results from the thinning of the North Pyrenean Zone. The thickening of both the Axial Zone and the North Pyrenean Zone during the Eocene compressional event preserved the step geometry.Calculated values of the minimum shortening range from 55 km in the western part of the belt to 80 km in the eastern part. Most of the shortening occurs south of the North Pyrenean Fault in the eastern part (Axial Zone) and north of the North Pyrenean Fault in the western part (Labourd thrust).  相似文献   

18.
The Cotiella Nappe includes one of the most important Mesozoic basins of the southern Pyrenees, which was subsequently inverted during the Tertiary compression. The Late Cretaceous Cotiella Basin is here interpreted as the western sector of the Cretaceous Cotiella-Bóixols basin (100᎜ km wide), located in the central part of the southern Pyrenees. The present-day complex structure of the Cotiella Nappe is the result of the inversion process, linked to the emplacement of basement thrust sheets of the Axial zone. In its western sector, the Cotiella Nappe consists of several superimposed thrust sheets, with complex geometry, becoming simpler towards the east, with a single thrust surface and smaller displacements. The Cotiella-Bóixols basin underwent strong subsidence during the Early Cretaceous at its eastern sector, and its depocentre migrated westward during the Late Cretaceous. The reconstruction of the sedimentary basin to the pre-compressional stage shows that during the Mesozoic the Cotiella-Bóixols basin was located to the south of a basement high, which later became the Pyrenean Axial Zone. From a balanced cross section, it can be inferred that the Cotiella, north-verging extensional system was connected with the north-Pyrenean rift by means of a 10-km deep horizontal detachment. The compressional Tertiary detachment within the upper crust was shallower than the extensional detachment, and individualised four basement thrust sheets, which form the Axial Zone antiform.  相似文献   

19.
乌鲁木齐山前坳陷逆断裂-褶皱带及其形成机制   总被引：66，自引：9，他引：57  
乌鲁木齐山前坳陷位于天山新生代再生造山带北侧,南以准噶尔南缘断裂与天山相隔,内部发育了几排逆断裂 背斜带,每一排构造带又由多个逆断裂 背斜组成。最南的齐古逆断裂 背斜带形成于中生代末,其北的玛纳斯逆断裂背斜带包含霍尔果斯、玛纳斯和吐谷鲁逆断裂背斜,形成于上新世末、早更新世初,受上、下２ 个滑脱面和断坡的控制,形成上、下２ 个背斜。再向北的独山子逆断裂背斜带由独山子、哈拉安德和安集海逆断裂背斜组成,形成于早、中更新世之间,主逆断裂向下在８ ～９ ｋｍ 深处的侏罗系中变为近水平滑脱面。此外,在独山子和吐谷鲁背斜的西北和东北还分别发育有正在形成之中的西湖和呼图壁隆起。研究了这些逆断裂 背斜带的地表和深部的构造特征、二维和三维几何学及运动学后指出,它们是在天山向准噶尔盆地扩展过程中发育于近水平滑脱面和不同断坡上的断展褶皱,独山子和安集海逆断裂 背斜的水平缩短量分别为２ ９００ ,１ ３５０ ｍ ,缩短速率分别为３９７ ,１８７ ｍ ｍ／ ａ。霍尔果斯、玛纳斯、吐谷鲁逆断裂 背斜的水平缩短量分别为５ ９００ ,６ ５００ ,６ ０００ ｍ ,相应的缩短速率分别为２０２,２２３ ,２０６ ｍ ｍ／ａ,准噶尔南缘断裂和乌鲁木齐山前坳陷第四纪?  相似文献   

20.
中国东部及邻区早白垩世裂陷盆地构造演化阶段   总被引：60，自引：0，他引：60  
张岳桥  赵越  董树文  杨农 《地学前缘》2004,11(3):123-133
早白垩世是中国东部及邻区强烈的伸展裂陷和岩石圈减薄时期。根据裂陷盆地几何形态特征和展布型式 ,将早白垩世裂陷盆地分为泛裂陷型 (燕山—松辽断陷盆地群、蒙古断陷盆地群等 )、狭窄型 (沂沭裂谷系、伊兰—伊通裂谷带 )和菱形状型 (胶莱盆地、三江盆地、鸡西盆地等 ) 3种类型。通过综合分析和对比不同类型裂陷盆地沉积序列和构造演化历史 ,结合郯庐断裂带和秦岭—大别造山带白垩纪构造演化历史的研究成果 ,区分了中国东部早白垩世 2个显著不同的引张裂陷阶段和一个构造挤压反转阶段。早白垩世早期引张裂陷阶段 ( 1 4 0～ 1 2 0Ma)形成了宽广展布的燕山—松辽断陷盆地系和蒙古断陷盆地系 ,沿郯庐断裂带发生右旋走滑活动 ,控制了断裂带西侧南华北伸展走滑盆地和东侧胶莱、三江等和沿敦—密断裂带走滑拉分盆地的发育 ;早白垩世中期引张裂陷阶段 ( 1 2 0～ 1 0 0Ma) ,沿郯庐断裂带中、北段发生裂谷作用 ,形成沂沭裂谷系和伊兰—伊通裂谷带 ;早白垩世晚期 ( 1 0 0～ 90Ma)在区域NW SE向挤压应力场作用下 ,所有早白垩世裂陷盆地发生不同程度的构造反转 ,沿郯庐断裂发生强烈的左旋走滑运动。最后指出 ,太平洋古板块向东亚大陆边缘俯冲诱发的大陆岩石圈底侵作用、拆沉作用、地幔底辟和对流 ,以及来自西部块体  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号