共查询到20条相似文献，搜索用时 93 毫秒
1.
潮流、波浪综合作用下河口二维悬沙数学模型 总被引：44，自引：2，他引：44
本文根据河口水流动力特性和泥沙变化规律，把波浪运动概化为具有时均意义的波浪流分布场，将“波流幅射应力”、“波流摩阻力”以及“波流挟沙力”三个要素归纳到水流运动方程和悬沙输送方程中去，构成潮流、波浪综合作用下河口二维悬沙数学模型计算系统。通过对珠江口黄茅海悬沙冲淤过程的实际算例，表明该系统模拟河口悬沙在潮流和波浪综合作用下的分布特性和冲淤趋势方面，具有良好的应用前景。 相似文献
2.
3.
含强水流高阶Boussinesq水波方程 总被引：13，自引：3，他引：10
采用摄动法并利用已建立的纯波情况下高阶Boussinesq方程,建立了可以考虑强水流与波浪相互作用的高阶Boussinesq方程.水流速度与波浪群速具有相同量级,且随时间和空间的变化尺度远大于波浪周期和波长.方程色散性近似到[4/4]阶Pade展开,对浅水情况方程可以是完全非线性的,可适用于波流相互作用的强非线性问题.通过将水流存在时波长和波幅的结果与一阶斯托克斯波结果对比,讨论了具有不同近似程度的3种含波流相互作用的Boussinesq方程的适用性. 相似文献
4.
海岸湿地是近海地区重要的生态系统,由于潮流、波浪尤其是非连续水流与植被的相互作用,导致该海域的水动力环境复杂多变。本文发展了一个深度平均二维波流耦合数学模型,模拟湿地海域波浪和波生沿岸流的运动特性。水动力模型中植物拖曳力作为源项放入动量方程中,在波浪作用量平衡方程增加波能耗散项用于解释水生植物对波浪产生的阻力作用。在动态耦合模型中,波浪模型为潮流模型提供波浪辐射应力、波高、波浪周期等数据信息,潮流模型为波浪模型提供计算的水位和流速,可以达到双向动态耦合。本文发展的波流耦合模型通过三个实验室试验数据加以验证,计算结果和实验数据吻合较好,在波浪、波生流和植物迭加条件下,所建模型能够有效地模拟波浪、沿岸流等不同现象。 相似文献
5.
6.
根据投弃式波流测量传感器的功能及应用特点,提出了其浮标体的结构设计要求,并依此给出了所设计浮标体的主体结构。文中描述了所设计的投弃式波流测量传感器浮标体各部分的结构功能,论证了该浮标体在投弃式波流测量方面的结构优势。共研究了所设计的3种不同投弃式波流测量传感器浮标体结构,包括两种采用柔性浮力叶片的浮标体和一种采用刚性浮力叶片的浮标体。根据柔顺机构学理论分别建立了其中两种柔性浮标体的伪刚体模型。对比了刚性浮标体和两种柔性浮标体的伪刚体模型在波浪海流作用下的姿态特点,分析了各浮标体在波高测量时的误差原因,得出了其中C型柔性浮标体具有更好的随波浪和海流运动响应的结论。为更深入地进行投弃式波浪测量传感器浮标体运动学和动力学的相关研究提供了模型基础。 相似文献
7.
根据海岸河口地区潮流、波浪、泥沙的运动特点及其相互作用机制,考虑了波浪场产生的"波浪辐射应力"和"波流挟沙力"动力要素对潮流场和泥沙运动的影响,在泥沙扩散方程中考虑了紊动水流作用,采用有限元加权集中质量法,建立了考虑波浪作用的潮流泥沙数学模型,并利用锦州港港区的潮流及泥沙资料对模型进行了验证。验证结果表明,潮位吻合良好,流速、流向、含沙量分布基本相似。在此基础上,模拟了工程建设前后,港区附近潮流场和泥沙淤积的变化,分析了泥沙骤淤现象。模拟结果表明,该数学模型能够适用于海岸河口地区潮流、泥沙的模拟,为波浪作用下潮流场和泥沙淤积的预测提供一种新的模拟方法,具有良好的应用前景。 相似文献
8.
基于细长体水动力模型比较了Truss Spar平台在波流联合作用下运动响应预报的三种方法。分别采用波流耦合、速度叠加及力叠加计算Truss Spar平台在波流联合作用下的水动力载荷,根据流场水质点运动规律和Truss Spar外部形状特点,分段高效计算水动力载荷。利用Runge-Kutta-Fehlberg方法求解刚体非线性运动方程得Truss Spar在波流场中的运动响应。研究结果表明力叠加法所预报的Truss Spar纵荡和纵摇运动明显大于其他两种方法的相应运动响应预报结果,而波流耦合法与速度叠加法所预报的纵荡与纵摇运动响应幅值相当,三种方法所预报的垂荡运动响应的大小取决于具体波流参数。 相似文献
9.
结合椭圆型缓坡方程模拟近岸波流场 总被引：6，自引：3，他引：6
波浪向近岸传播的过程中,由波浪破碎效应所产生的近岸波流场是近岸海域关键的水动力学因素之一.结合近岸波浪场的椭圆型缓坡方程和近岸波流场数学模型对近岸波浪场及由斜向入射波浪破碎后所形成的近岸波流场进行了数值模拟.计算中考虑到波浪向近岸传播中由于波浪的折射、绕射、反射等效应使局部复杂区域波向不易确定,采用结合椭圆型缓坡方程所给出的波浪辐射应力公式来计算波浪产生的辐射应力,在此基础上耦合椭圆型缓坡方程和近岸波流场数学模型对近岸波流场进行数值模拟,从而使模型综合考虑了波浪的折射、绕射、反射等效应且避免了对波向角的直接求解,可以应用于相对较复杂区域的近岸波流场模拟. 相似文献
10.
为了研究波流共同荷载作用下开挖基槽附近海床动态响应和液化破坏情况，提出一个二维耦合计算模型，采用雷诺时均纳维-斯托克斯（RANS）方程描述波浪运动情况，通过设定侧边界条件实现稳定流场。海床部分通过求解Biot固结方程，得到波流荷载下海床中的应力和位移情况。将模型计算结果与水槽试验数据和解析解进行比较，验证了波流模型和海床模型的有效性。在此模型基础上，分析得到了开挖之后海床新的应力和固结状态。同时，通过参数分析得到了波流耦合情况下波浪形态的变化，以及海流对海床液化情况和孔压情况的影响。最后，通过线性回归计算得到最大液化深度与流速的拟合关系曲线。计算结果可用于判断基槽开挖后不规则海床的液化情况，对相关研究和实际工程具有一定参考意义。 相似文献
11.
Chandralata Raghukumar G. Sheelu P. A. Loka Bharathi Shanta Nair C. Mohandass 《Marine Georesources & Geotechnology》2001,19(1):1-16
In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance. 相似文献
12.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
13.
Derek V. Ellis 《Marine Georesources & Geotechnology》2001,19(1):51-63
This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested. 相似文献
14.
G. Parthiban 《Marine Georesources & Geotechnology》2000,18(3):223-235
Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement. 相似文献
15.
海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。 相似文献
16.
Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification
An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm. 相似文献
17.
The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
19.
20.