首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Clay mineral assemblages in alluvial mudrocks are important for paleoclimatic interpretation and for understanding burial diagenetic cementation in sandstones, but it is commonly difficult to unravel the relative importance of source weathering, pedogenesis and diagenesis in their origin. The clay mineral assemblages in fluvial overbank mudrocks from the Lower Cretaceous Chaswood Formation in central Nova Scotia, investigated by X-ray diffraction analysis of the < 2 µm fraction of 45 samples, include kaolinite, illite, vermiculite, and mixed layer kaolinite/expandable clay and mica/vermiculite. The assemblages vary with depositional facies. Wetland organic-rich mudrocks have large amounts of amorphous material and kaolinite is the dominant clay mineral. In the eastern part of the basin, where overbank mudrocks were episodically uplifted by syn-sedimentary strike-slip faulting, cumulate ultisol and alfisol paleosols are common. In the ultisols, hematite is enriched and kaolinite increases at the expense of illite in the B horizon. Alfisols contain more illite and vermiculite and the B horizon is enriched in goethite. In the western part of the basin, where thin sandstones with abundant diagenetic kaolinite cement are interbedded with the mudrocks, the distinctive clay mineral assemblage of mica/vermiculite mixed layer, vermiculite with 15.5 Å peak, and kaolinite/expandable mixed layer clay with a 17.7 Å peak is interpreted to result from bacterially-mediated oxidation of organic matter below the paleo-water table during early burial diagenesis. Deeper burial diagenesis may lead to slightly higher kaolinite crystallinity. Volcanic ash appears to alter to kaolinite/expandable mixed layer clay with a 7.9 Å peak. Comparison with the continuously subsiding and rapidly accumulated Wessex Formation of southern England, formed at a similar paleolatitude, shows the strong role of pedogenic processes and early diagenesis by meteoric water in development of clay mineral assemblages in the locally tectonically uplifted Chaswood Formation.  相似文献   

2.
沉降法与激光法粒度分析的主要差异是黏土粒径,这个差异将直接影响到黏土、粉砂含量和沉积物类型。本文对激光法黏土粒径和含量及沉积物类型进行系统校正。南海东部水深〉2 000 m海域沉降法得出的砂、粉砂、黏土含量分别为3.66%、42.43%、53.91%,激光法砂、粉砂、黏土含量分别为9.26%、61.11%、29.64%...  相似文献   

3.
Plagioclases and K-feldspars in the sandstones and mudrocks of the Cretaceous non-marine Gyeongsang Basin, Korea, were partially to completely albitized. The preservation of fresh plagioclase grains in early micrite-cemented sandstones suggests the diagenetic origin of albite. Albitization textures in mudrocks were examined using backscattered electron images. In contrast to completely albitized plagioclase grains in sandstones, those in mudrocks are mostly partially albitized. It suggests that mudrocks can be more useful for a provenance study than sandstones by preserving detrital minerals better. K-feldspar is unaltered to partially albitized in both sandstones and mudrocks. In mudrocks albitization starts preferentially along microfractures, cleavages and grain margins. Albitization along grain margins seems to be a characteristic feature in mudrocks where development of microfractures in silt-sized feldspar grains by physical compaction is limited by clayey matrix as well as by overpressure. The extent of albitization in mudrocks is mainly controlled by composition of the detrital plagioclase. Mudrocks containing calcic plagioclase grains tend to be more extensively albitized than those containing sodic varieties.  相似文献   

4.
The qualities of a laser diffraction grain size analyser, the Coulter LS-100 (range claimed by the manufacturer: 0·4–900 μm in a single measurement), are evaluated on sediments of fluvial and lacustrine origin. Accuracy and resolution of measurement on standard latex spheres are excellent. Reproducibility of the results on natural sediments appears to be satisfactory, but the method underestimates the fraction of clay particles with an efficiency of detection (36–70%) proportional to the clay content determined from pipette analysis. This efficiency is somewhat higher than those reported from other instruments of the same generation. Comparison of the Coulter LS-100 with other sizing techniques shows good agreement with the sieving method but some differences appear with the electroresistance particle technique: median and mean size values measured by the Coulter Counter TA1 are systematically lower than those obtained by the Coulter LS-100. Analyses show good correlation with those of a Malvern Laser particle analyser but a discrepancy appears with very fine silt and clay sized sediments. The Coulter LS-100 detects a higher clay content than that measured with the Malvern Laser Sizer 2600. Except when precise measurements of clay content are needed, the Coulter LS-100 produces precise and accurate results in size ranges required for geological and environmental studies.  相似文献   

5.
The spatial distribution of clay minerals in sandstones, which may both enhance or degrade reservoir quality, is poorly understood. To address this, clay mineral distribution patterns and host‐sediment properties (grain size, sorting, clay fraction abundance and bioturbation intensity) have, for the first time, been determined and mapped at an unprecedentedly high‐resolution in a modern estuarine setting (Ravenglass Estuary, UK). Results show that the estuary sediment is dominated by illite with subordinate chlorite and kaolinite, although the rivers supply sediment with less illite and significantly more chlorite than found in the estuary. Fluvial‐supplied sediment has been locally diluted by sediment derived from glaciogenic drift deposits on the margins of the estuary. Detailed clay mineral maps and statistical analyses reveal that the estuary has a heterogeneous distribution of illite, chlorite and kaolinite. Chlorite is relatively most abundant on the northern foreshore and backshore and is concentrated in coarse‐grained inner estuary dunes and tidal bars. Illite is relatively most abundant (as well as being most crystalline and most Fe–Mg‐rich) in fine‐grained inner estuary and central basin mud and mixed flats. Kaolinite has the highest abundance in fluvial sediment and is relatively homogenous in tidally‐influenced environments. Clay mineral distribution patterns in the Ravenglass Estuary have been strongly influenced by sediment supply (residence time) and subsequently modified by hydrodynamic processes. There is no relationship between macro‐faunal bioturbation intensity and the abundance of chlorite, illite or kaolinite. Based on this modern‐analogue study, outer estuarine sediments are likely to be heavily quartz cemented in deeply‐buried (burial temperatures exceeding 80 to 100°C) sandstone reservoirs due to a paucity of clay grade material (<0·5%) to form complete grain coats. In contrast, chlorite‐enriched tidal bars and dunes in the inner estuary, with their well‐developed detrital clay coats, are likely to have quartz cement inhibiting authigenic clay coats in deeply‐buried sandstones.  相似文献   

6.
Grain‐size data from different climatic zones across the Chinese Loess Plateau show that the loess generally contains an ultrafine component, which has a consistent modal grain size of ca 0·37 μm and a variable proportion of 4 to 10%. The variation of the ultrafine component through a loess section is characterized by a high proportion and fine grain size in palaeosols, and by a low proportion and coarse grain size in loess layers. Its proportional content in a stratum roughly increases from north‐west to south‐east across the Loess Plateau. Quantitative X‐ray diffraction analysis indicates that the ultrafine component is composed mainly of clay minerals (ca 70%), which are mostly illite (ca 80%), and with significant amounts of kaolinite (ca 8%) and chlorite (ca 2%). The temporal and spatial variations of the ultrafine component, and the degree of illite crystallinity, suggest that this component in aeolian sediments is linked closely to the process of pedogenesis. Weakly altered loess on the north‐western margin of the Loess Plateau contains considerable amounts of detrital clay minerals derived from the aeolian source areas. Results from a loess section with a basal age of 7·6 Ma in the central Loess Plateau show that the ultrafine component increased from 7·6 to 5 Ma, and progressively decreased thereafter. This trend was punctuated by two abrupt changes at 2·6 and 0·6 Ma. These variations reflect to a considerable extent the history of pedogenesis during the Late Cenozoic.  相似文献   

7.
Bianchi  Hall  McCave  & Joseph 《Sedimentology》1999,46(6):1001-1014
The weight percentage and mean size of the 10–63 μm terrigenous silt fraction (termed 'sortable silt') of fine-grained marine sediments have recently been argued to be proxies for near-bottom palaeocurrent intensity. This paper details the accuracy and precision of the Sedigraph 5100 and the Coulter Multisizer IIe in determining the weight percentage and mean size of the sortable silt at abundances characteristic of deep-ocean sediments. Three sortable silt standards and a fine silt/clay diluent were generated from natural deep-sea sediment of the Iceland Basin. These were used to produce silty clays with standard additions of sortable silt ranging from 1% to 20% of the total by weight. Accuracy was measured relative to the size of the pure spike measured by each instrument. At sortable silt abundance >5%, the Sedigraph and the Coulter Multisizer estimate both weight percentage and mean grain size precisely and accurately, while below 5%, instrumental noise degrades their performance. On the basis of the Sedigraph results, a series of percentage errors is defined, which may be applied to sortable silt mean size and weight percentage estimates used in palaeoceanographic near-bottom current reconstruction. It is suggested that, ideally, palaeocurrent reconstructions should be based on Sedigraph determinations of the 0–63 μm grain size distribution, yielding both mean and abundance, or on Coulter Multisizer determinations of the sortable silt grain size mean. The Coulter Multisizer may prove especially useful in regions of very depleted (<5%) sortable silt component.  相似文献   

8.
文章以滇东南浅水湖泊异龙湖作为研究对象,通过对湖泊不同位置的40个表层沉积物样品进行粒度测试,结合流域自然地理要素和人类活动特征,分析了异龙湖表层沉积物粒度空间分布特征,并探讨了其影响因素。结果表明,异龙湖表层沉积物沉积类型主要有粘土质粉砂、粉砂质粘土以及砂-粉砂-粘土3种,其中以粘土质粉砂类型为主,其次为粉砂质粘土。粉砂(4~63μm)为异龙湖表层沉积物优势粒径成分,其含量介于57.08%~82.41%,其次为粘土(小于4μm),介于11.22%~35.58%,砂组分(大于63μm)含量最低,含量介于0.16%~25.80%。异龙湖表层沉积物具有明显的空间分布特征,其中粉砂类似同心圆的空间分布特征,其含量由湖区的中间地带分别向西北、西南、东南3个方向递增;而粘土含量则呈现出相反的趋势。由于受断层影响,异龙湖表层沉积物各粒度组分形成了西北、东南两个相对对称的区域;西北湖区沉积物粒度分布特征同时受自然环境与人类活动的影响,沉积物类型主要有粘土质粉砂和粉砂质粘土,其中以粘土质粉砂为主;而东南深水湖区由于受人为干扰因素较弱,可以视为认识自然状态下物质搬运过程、探讨水动力特征以及研究自然湖泊沉积和气候变化的理想场所。  相似文献   

9.
The Early Palaeoproterozoic Brockman Supersequence comprises banded iron formation (BIF), bedded chert, limestone, mudrock, sandstone, breccia, tuffaceous mudstone, ashfall tuff and, in sections not reported here, basalt and rhyolite. Density current rhythms are preserved in sandstones, mudrocks, tuffaceous mudstones and limestones. Relics of similar rhythms in BIF imply that its precursor sediments were also deposited by density currents. Hemipelagic deposits are siliciclastic or mixed siliciclastic–volcaniclastic mudstones. Bedded chert, chert nodules and the chert matrix of BIF preserve evidence for formation by diagenetic replacement. For bedded chert (and chert nodules), silica replacement occurred before compaction close to or at the sediment–water interface, indicating that it is siliceous hardground. The chert matrix of BIF formed during compaction but before burial metamorphism. Original sediments were resedimented from two sources: (1) limestone, mudrock, sandstone, breccia and tuffaceous mudstone from a shelf; and (2) BIF from within the basin realm. Shelf sediments were resedimented to basin-floor fans during third-order lowstands. The precursor sediments to BIF are interpreted to have been granular hydrothermal muds, composed of iron-rich smectite and particles of iron oxyhydroxide and siderite that were deposited on the flanks of submarine volcanoes and resedimented by density currents. Resedimentation occurred by either bottom currents or gravity-driven turbidity currents, and the resulting sediment bodies may have been contourite drifts. The concept that BIF records high-frequency alternating precipitation from ambient sea water of iron minerals and silica is negated by this study. Instead, it is postulated that the precursor sediments to BIF originated in much the same way as modern Red Sea hydrothermal iron oxide deposits, implying that at least the particles of iron oxyhydroxide originated from the oxidation of vent fluids by sea water. Several orders of cyclicity in basin filling establish a relationship between rising to high sea levels, episodic sea-floor hydrothermal activity and BIF that is reminiscent of the link between eustacy and spreading-ridge pulses.  相似文献   

10.
苏新  宋成兵  方念乔 《地学前缘》2005,12(1):234-242
文中对国际大洋钻探204航次在太平洋水合物海岭8 个站位BSR深度以上气体水合物稳定带的沉积物进行了粒度分析和对比研究。结果表明,该稳定带内沉积物总体粒径变化特征为:粉砂质量分数在60%~75%之间,为气体水合物稳定带内沉积组分的主体组分。粘土质量分数一般小于35%,砂质量分数小于5%。该结果获得的粒径变化范围,与204 航次中沉积学研究所确定的粘土质粉砂、粉砂质粘土夹含砂质粉砂、含砂质粘土岩性特征一致。各站位沉积粒径变化和代表气体水合物存在的岩心红外照相IR异常低温记录之间的初步对比说明,气体水合物主要富集在沉积组分较粗,相当于粉砂或者砂级质量分数较高的粒度层。统计学的相关性研究结果定量地揭示了各个站位沉积物粒径变粗与气体水合物的存在有不同的相关关系。归纳起来发现,不同构造部位沉积物中气体水合物赋存层段的粒径范围不同。坡后盆地由于当地总体沉积物颗粒细,气体水合物赋存在极细粉砂粒级(8~26μm)的沉积物中。水合物海岭南峰顶部附近站位气体水合物主要赋存在粗粉砂和细砂(50~148μm)之间。  相似文献   

11.
Sediment data from the Bahamian Santaren carbonate drift reveal the variability of trans‐Atlantic Saharan dust transport back to about 100 ka bp (Marine Isotope Stage 5·3) and demonstrate that carbonate drifts are a valuable pelagic archive of aeolian dust flux. Carbonate drift bodies are common around tropical carbonate platforms; they represent large‐scale accumulations of ocean‐current transported material, which originates from the adjacent shallow‐water carbonate factory as well as from pelagic production, i.e. periplatform ooze. Subordinately, there is a clay‐size to silt‐size non‐carbonate fraction, which typically amounts to less than 10% of the sediment volume and originates from aeolian and fluvial input. Sedimentation rates in the 5·42 m long core GeoHH‐M95‐524 recovered 25 km west of Great Bahama Bank in the Santaren Channel ranges from 1·5 to 24·5 cm ka?1 with lowest values during the last glacial lowstand and highest values following platform re‐flooding around 8 ka bp . These sedimentation rates imply that carbonate drifts have not only the potential to resolve long‐term environmental changes on orbital timescales, but also millennial to centennial fluctuations during interglacials. The sediment core has been investigated with the aim of characterizing the lithogenic dust fraction. Laboratory analyses included X‐ray fluorescence core scanning, determination of carbonate content and grain‐size analyses (of bulk and terrigenous fraction), as well as visual inspections of the lithogenic residue; the age model is based on oxygen isotopes and radiocarbon ages. Data show that the input of aeolian dust in the periplatform ooze as indicated by Ti/Al and Fe/Al element ratios abruptly increases at 57 ka bp , stays elevated during glacial times, and reaches a Holocene minimum around 6·5 ka bp , contemporary to the African Humid Period. Subsequently, there is a gradual increase in dust flux which almost reaches glacial levels during the last centuries. Grain‐size data show that the majority of dust particles fall into the fine silt range (below 10 μm); however, there is a pronounced coarse dust fraction in the size range up to 63 μm and individual ‘giant’ dust particles are up to 515 μm in size. Total dust flux and the relative amounts of fine and coarse dust are decoupled. The time‐variable composition of the grain‐size spectrum is interpreted to reflect different dust transport mechanisms: fine dust particles are delivered by the trade winds and the geostrophic winds of the Saharan Air Layer, whereas coarse dust particles travel with convective storm systems. This mode of transport ensures continuous re‐suspension of large particles and results in a prolonged transport. In this context, grain‐size data from the terrigenous fraction of carbonate drifts provide a measure for past coarse dust transport, and consequently for the frequency of convective storm systems over the dust source areas and the tropical Atlantic.  相似文献   

12.
 Geochemical characteristics of six trace metals – Cu, Co, Ni, Zn, Cd and Cr – in the bulk sediment and sand, silt and clay fractions of a tropical estuary on the southwest coast of India have been studied and discussed. In bulk sediment, the trace metal concentration is controlled mainly by the textural composition of the sample. Mud, sandy mud and sandy silt register higher concentrations of trace metals than that in sand-dominant sediments. The granulometric partitioning studies also re-affirmed the role of particle size in enriching the trace metals. The silt and clay fractions exhibit 7–8 times the enrichment of Cu and Cd compared to that in sand. The enrichment factors of Zn, Cr, Ni and Co in the silt and clay fractions, compared to that in sand, are 5–6, 4–5, 2–5 and 2–3 times, respectively. The trace metals in the sand fraction, particularly Ni and Cr, exhibit strong positive correlation with the heavy mineral content of the samples. It clearly indicates a heavy mineral pathway to the trace metals in the sand fraction. Cu and Co in silt and clay fractions exhibit a marked decrease towards the high saline zones of the estuary. This is attributed to the desorption of Cu and Co from particulate phases during estuarine mixing. Contrary to Cu and Co, the content of Zn in the clay fraction shows a marginal increase towards the estuarine mouth. This could be explained by the influx of Zn-rich contaminant discharges from Zn-smelting industries located slightly north of the estuarine mouth. The released Zn will effectively be held in the lattices of the clay mineral montmorillonite, which also exhibits a marked increase towards the estuarine mouth. The anomalously high values of Cd in some places of the Central Vembanad estuary is attributed to the local pollution. Received: 10 July 1995 · Accepted: 3 June 1996  相似文献   

13.
 This paper deals with the problem of increased heavy metal constituents in agricultural soils due to the expanded use of fertilizers and elevated atmospheric deposition. It discusses the extent of contamination in soil and establishes an environmental monitoring program in the chosen area of concern in the southern coastal region of Texas. Grain size, pH, and metals (Cu, Cd, Zn, Pb, Ni, Ba, As, Cr, Mn, and Fe) were determined in soils of the middle Rio Grande basin. The soils were mainly of sand texture and alkaline in character. Fine sand constituted the major proportion of the soil, and clay and silt ranged from 8–30% of the soil. Correlations of metal concentrations to grain size and iron contents were performed. Metals, except Cd and Pb, gave positive to negative relationships with decreases in grain size. Silt gave no relationship with metal content while clay and silt had a positive relationship. All these metals had a positive correlation with iron in the soil. The results indicate metals are associated with coarse sand, clay, and iron hydroxides surfaces of the soil. The comparison of metal content in soil of the middle Rio Grande basin with metals from other areas of the world suggests that it is relatively uncontaminated. Received: 14 December 1998 · Accepted: 19 Jaunuary 1999  相似文献   

14.
The relationship between composition and physical parameters such as specific surface area, cationic exchange capacity and plasticity is studied with the aim of developing regression models that would permit the prediction of clay properties. These models could be useful for mineralogists and industrial applications. Nineteen representative clay samples were collected from Jebel Ressas in north-eastern Tunisia. Mineralogical data show that clay samples cover a very large variety of minerals. The main clay mineral is illite (50–60 wt%), secondary minerals including quartz, calcite and minor amounts of Na-feldspar. This study reveals that the average amount of silica (SiO2) and alumina (Al2O3) are 51.9 and 19.6 wt%, respectively. The contents of lime (CaO) and iron (Fe2O3) vary between 4 and 8 wt% whereas the amount of alkalis (Na2O + K2O) is on average 4.1 wt%. The grain size data indicates a significant amount of silt fraction, and the fraction <2 µm varies between 23 and 35 wt%. Values for plasticity index range from 16 to 28 wt%. The cation exchange capacity and the specific surface values are 34.1–45.7 meq/100 g of air-dried clay and 302–374 m2/g, respectively. Lastly, regression models are used to correlate the properties with the mineralogical and chemical compositions. The significance and the validity of models were confirmed by statistical analysis and verification experiments. The regression models can be used to select the clay properties (plasticity index, cation exchange capacity and specific surface) in relation with clay minerals proportions and the finer fraction amounts.  相似文献   

15.
The Upper Cretaceous (Campanian–Maastrichtian) Taveiro and Aveiro Formations belong to the northern sector of the Lusitanian basin (Portuguese western margin). The Taveiro Formation was deposited in alluvial fans, including mud flow beds, lakes and sinuous rivers. The Aveiro Formation was deposited in a flat region with low hydrodynamics channels, with the formation of a barrier island-tidal system. The reconstruction of this sedimentary basin may be difficult due to its complex architecture. This work aims a methodology to be used in the reconstruction of Cretaceous sedimentary environments of the Lusitanian basin, through the establishment of geochemical patterns of different size fractions of those deposits. Chemical analysis was performed by instrumental neutron activation analysis (INAA), and the mineralogical composition obtained by X-ray diffractometry (XRD). The whole rock and different size fractions (? ≥ 125 μm, 63–125 μm, 20–63 μm, 2–20 μm and ? < 2 μm) of selected samples were studied aiming the rare earth elements (REE) and other trace elements distribution and its correlation with the grain size and mineralogy.The results obtained for the studied Cretaceous sediments showed that REE patterns and other trace elements distribution in the different size fractions may be used as a tool to differentiate deposits within and between sedimentary formations. Within the Taveiro Formation, REE are concentrated in the silt fractions (20–63 μm and 2–20 μm) of the Reveles deposit, and in the clay size fraction of S. Pedro deposit, which is richer in kaolinite. The 1st transition elements, particularly Zn, are correlated with the presence of smectite in the clay fraction of Reveles deposit. In the sand and silt size fractions (>2 μm) of samples from Taveiro Formation correlations were found between: Ga and 1st transition elements, and phyllosilicates; Cs and mica; and Rb and Ba, and K–feldspars.The Bustos deposit (Aveiro Formation) samples are very fine-grained and with a high proportion of the fine silt fraction where REE are concentrated, especially the heavy ones. Incorporation of MREE, Co and U in carbonates of the coarser fraction appears to occur. The abundances of the 1st transition elements, Ga and As, are correlated with phyllosilicates.Significant differences were found in the trace elements patterns of the various analysed size fractions of the Lusitanian basin of Cretaceous sediments, between and even within formations, which can be used as a methodological approach for a fine paleogeographic reconstruction.  相似文献   

16.
Both sediment recycling and first-cycle input influence the composition of clastic material in sedimentary systems. This paper examines conceptually the roles played by these processes in governing the composition of clastic sediment on a regional scale by outlining the expected effects on sediment composition of protracted sediment recycling and of continuous first-cycle input on a maturing continental block. Generally speaking, long-term recycling tends to enrich sediments in the most chemically and mechanically stable components: quartz in the sand and silt size fractions, and illite among the clay minerals. Sandstones trend towards pure quartz arenites, and mudrocks become more potassic and aluminous. The average grain size of clastic sediment decreases by a combination of progressive attrition of sand grains and ongoing breakdown of primary silicate minerals to finer-grained clay minerals and oxides. Sandstones derived by continuous first-cycle input from an evolving continental crustal source also become increasingly rich in quartz, but in addition become more feldspathic as the proportion of granitic material in the upper continental crust increases during crustal stabilization. Associated mudrocks also become richer in potassium and aluminum, but will have higher K2O/Al2O3 ratios than recycled muds. The average grain size of the sediment may increase with time as the proportion of sand-prone granitic source rocks increases at the expense of more mud-prone volcanic sources. In general, except in instances where chemical weathering is extreme, first-cycle sediments lack the compositional maturity of recycled detritus, and are characterized by the presence of a variety of primary silicate minerals. Sedimentary systems are not usually completely dominated by either recycling or first-cycle detritus. Generally, however, sedimentary systems associated with the earliest phases of formation and accretion of continental crust are characterized by first-cycle input from igneous and metamorphic rocks, whereas those associated with more mature cratons tend to be dominated by recycled sedimentary material.  相似文献   

17.
 The geochemical and mineralogical characteristics of bulk samples and various size fractions of sulfide-bearing fine-grained sediments in the Petalax area, western Finland, were studied with ICP-AES (aqua regia digestion and "total" digestion) and X-ray diffraction. The sediments, which are dominated by particles <0.06 mm (clay and silt size), are composed of phyllosilicates (micas, kaolinite, chlorite, vermiculite), quartz, feldspars, amphiboles, organic matter, and secondary S minerals. The chemical analyses show that Na, Ca, and Sr are enriched in the silt and sand fractions, that Zr is enriched in the silt fraction, and that the concentrations of all other studied metals (Al, Ba, Co, Cr, Cu, Fe, K, La, Mg, Mn, Nb, Ni, Sc, Th, Ti, V, Y, and Zn) increase from the sand to the clay fraction. Sodium, Ca, and Sr occur largely in poorly dissolved feldspars, which explains the distribution of these metals in the sediments. The increase in the concentrations of most metals in the clay fraction is interpreted to be the result mainly of an increase in phyllosilicates in this size fraction. A geochemical comparison between the sulfide-bearing fine-grained sediments and glacial till shows that the former are enriched in several potentially toxic metals. It is therefore argued that the hydrological and ecological problems associated with the sulfide-bearing sediments are related not only to the production of acidity in oxidized layers, but also to mobilization and dispersion of toxic metals. Strategies to minimize damage of freshwater systems in areas covered with sulfide-bearing fine-grained sediments are suggested. Received: 20 February 1997 · Accepted: 25 August 1997  相似文献   

18.
Whole rock major, trace and rare earth element (REE) compositions of Paleogene to Neogene sedimentary rocks of the NW shelf succession (Province 1) of Bangladesh contain a record of interaction of the India and Asian plates, Himalayan tectonism, and climatic development. Analyses of 66 sandstones and mudrocks from the Tertiary succession of Bangladesh were made to examine provenance, source weathering, and the influence of paleoclimate and tectonism. The sediments display linear geochemical trends due to quartz dilution, and varying quartz–clay ratios produced by hydrodynamic sorting. Chondrite-normalized REE patterns for both sandstones and mudrocks from different groups are similar to upper continental crust, with moderate to high LREE enrichment (lithotypes within formations average LaN/YbN 5.31–11.41) and marked negative Eu anomalies (Eu/Eu* 0.51–0.69). Based on geochemical criteria the succession can be divided into three parts (Jaintia; Barail–Surma; and Dupi Tila). Very high silica contents in Jaintia Tura sandstones and high Chemical Index of Alteration (CIA) indices in Kopili mudrocks (Fe-shales) suggest derivation from a deeply weathered and stable cratonic source (India). The Tura sandstones are interpreted as first-cycle quartz arenites, produced while the Indian plate drifted across equatorial regions during the Paleocene–Eocene Thermal maximum (PETM). The Barail–Surma and Dupi Tila sediments were derived from a felsic orogen (the Himalaya). The Barail–Surma sediments were mainly derived from the Trans Himalayan Batholith and associated granitoids, with significant contribution from the Lesser Himalaya. Mafic input is also evident, probably from intraoceanic arc material within the Himalaya. Barail mudrocks have uniformly high CIA values (92–95), suggesting intense steady-state weathering of their proto-Himalayan source, and warm and humid climate. In contrast, CIA values of Surma mudrocks range from 66 to 93 (average 84), suggesting non-steady state weathering related to active uplift in the Himalaya. The Dupi Tila sediments were derived from a more felsic Lesser Himalaya source, with significant contribution from the Trans-Himalaya and very little or no ophiolitic or arc material. Dupi Tila mudrocks have CIA ratios of 62–99 (average 72), also indicating non-steady state weathering in the rising Himalayan source. Geochemical compositions of the NW shelf sediments are comparable to coeval successions in the Surma basin (Province 2) of Bangladesh and the Siwaliks (India), indicating similar source. Evolution of the Indian monsoon and associated high precipitation caused intense chemical weathering of the Surma and Dupi Tila source, despite rapid uplift. The Surma Group thus bears the signature of evolution of the Asian monsoon in the Bengal basin at 21 Ma, simultaneous with the development of the East Asian monsoon. This supports proposals that both monsoon systems developed at the same time.  相似文献   

19.
Classically, the grain size of soil and sediment samples is determined by the sieve method for the coarse fractions and by the pipette method, based on the ‘Stokes’ sedimentation rates, for the fine fractions. Results from the two methods are compared with results from laser diffraction size analysis, which is based on the forward scattering of monochromatic coherent light. From a point of view of laboratory efficiency, the laser sizing technique is far superior. Accuracy and reproducibility are shown by measurements on certified materials. It appears that laser grain size measurements of certified materials correspond very well with the certificated measurements. Tests were also done on a set of randomly selected sediments of fluvial, aeolian and lacustrine origin. Except for the (<2 μm) clay fraction, there is a coarsening of the mean diameter of one to two size classes (0.25 ?), caused by the non-sphericity of the particles. The platy form of the clay particles induces considerable differences (eight size classes) between pipette and laser measurements: the <2 μm grain size, defined by the pipette method corresponds with a grain size of 8 μm defined by the Laser Particle Sizer for the studied sediments. Using a higher grain size level for the clay fraction, when laser analysis is applied, enables workers in the geological and environmental field to compare classical pipette analysis with a laser sizing technique.  相似文献   

20.
苏州澄湖湖底硬粘土粒度特征及成因初探   总被引：4，自引：0，他引：4  
澄湖是太湖平原上的一个浅水湖泊,湖底十分平坦,主要由硬粘土组成,同时发育有NW—SE横穿澄湖的古河道和泥沼洼地。在接近湖泊中心部位的古河道中打钻获得了4 m长的岩芯,并进行了详细的粒度分析。结果表明,该岩芯下部的硬粘土主要由细粉砂、中粉砂和粘土组成,分别占26.7%~38.1%,26.9%~34.3%和19.7%~26.2%,可命名为粘土质粉砂;众数粒径为10~50 μm,平均占57.9%;平均粒径为6.3~6.9。将其与上部的湖泊沉积、镇江下蜀黄土和中国北方各地黄土的粒度比较表明,苏州澄湖湖底的硬粘土原本也是风尘沉积。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号