共查询到20条相似文献，搜索用时 31 毫秒
1.
Techniques to measure grain-size distributions of loamy sediments: a comparative study of ten instruments for wet analysis 总被引：2，自引：0，他引：2
DIRK GOOSSENS 《Sedimentology》2008,55(1):65-96
Ten instruments for measuring the grain‐size distribution of loamy sediments in water were tested in a comparative study. Instruments tested were: the Malvern Mastersizer S, the Coulter LS 200, the Fritsch Analysette 22 (version C), the Horiba Partica LA‐950, the Sedigraph 5100, the Atterberg cylinder, the Coulter Multisizer 3, the CIS‐100, the EyeTech and the image analysis software Histolab. The first four instruments use laser diffraction. The Sedigraph and Atterberg cylinder are based on sedimentation. The Coulter Multisizer 3 uses impedance measurements and the last three instruments use optical techniques. Grain‐size analyses were carried out on four sediments with median grain diameters of approximately 35, 30, 12 and 9 μm, respectively, and with no particles >90 μm. The laser diffraction instruments produced the best results for the various criteria considered in this study, followed by the Coulter Multisizer 3 (electrical sensing zone technique), the sedimentation techniques and the optical methods. However, the study also showed that there is no such thing as an ‘ideal’ method because techniques may score differently according to the criterion tested. An appropriate evaluation thus requires that various criteria be considered. Issues to be taken into account are: type of sediment, quantity of sediment available, speed of measurement, complexity of the measurement protocol, processing of the data, reproducibility of the results and the specific aims of the study undertaken. 相似文献
2.
Laser vs. settling velocity differences in silt grainsize measurements: estimation of palaeocurrent vigour 总被引：1，自引：1，他引：1
The use of grain‐size distribution of muds for the reconstruction of past deep ocean currents is becoming established and applied in the palaeoceanographic community. The methods are also applicable to shallow marine and tidal flat muds with similar inferences concerning the energy of wave and current sorting being drawn. Fine sediment grain‐size distributions can be obtained using a variety of instruments based on fundamentally different theoretical principles. These machines may give varying, sometimes misleading, results giving divergent interpretations of flow speed history. The new evidence presented here, combined with earlier work, suggests that of the three most commonly used analytical methods for fine silts with clays, settling velocity (Sedigraph) should be the method and instrument of choice, with electrical resistance pulse counters (e.g. Coulter Counter) as a suitable alternative. The data also show that laser particle sizers should be avoided for palaeocurrent reconstructions because the measured size of platey minerals can be dominated by their large projected area. This causes them to be recorded as the same size as larger equant grains although they have much smaller settling velocity and were deposited in aggregates. This produces results with a weaker relationship to the dynamics of deposition. The central problem is thus that some coarse clay/fine silt is recorded as medium to coarse silt, the key size in the ‘sortable silt’ mean size method of inferring changes in flow speed. For coarse silts (e.g. loess) the laser gives more satisfactory results. 相似文献
3.
In muddy sediments, the distinction between sortable silt and aggregated silty clay is important for the understanding of fine particle dynamics because both have different hydraulic properties. The Wadden Sea of the southern North Sea is severely depleted in fine-grained sediments mainly due to high energy levels along the diked coastline. As a result, muddy sediments are restricted to a narrow belt along the diked mainland shore. In the present study, the mechanism by which this mud is deposited and how floc deposition and break-up are reflected in the size distribution, has been investigated. For this purpose, surficial sediments from four intertidal nearshore transects were monitored and repeatedly sampled in the course of two years. High-resolution grain-size analyses were performed by an automated settling tube and a Sedigraph particle analyser for the sand and mud fractions, respectively.The grain size frequency distributions of the fine fractions demonstrate that the Wadden Sea muds are composed of two subpopulations, a well-sorted coarse silt and an unsorted silty clay population. A depletion of grain size around 8 μm (7 phi) demarcates the grain-size boundary between the two populations, suggesting that the finer mud population (< 8 μm) is deposited in the form of flocs and aggregates which are hydraulically equivalent to the local sands and coarser silts. Floc break-up and reconstitution in response to seasonally changing energy regimes lead to apparent seasonal sedimentation patterns in the back-barrier tidal basins. Furthermore, in the course of sample preparation, the flocs and aggregates are broken down into their constituent particles. This mechanical artefact in the size distributions produces an artificial seasonal fining/coarsening pattern. It was found that the comparison of clay/silt and < 8 μm/63 − 8 μm particle ratios are good indicators of floc behaviour. Higher ratios are found in mixed flats which are relatively protected from wave action, thereby promoting deposition of flocs. In addition, progressive size sorting and mixing processes along the transects are recognized in the frequency distributions of sands. The skewness pattern shows a landward decrease in positive values, which is exactly opposite to previously reported patterns, suggesting progressive winnowing of fine particles caused by increased wave action over the last decade. This effect of climate change further promotes depletion of fine-grained sediments in the basin. 相似文献
4.
Evaluation of a wide range laser diffraction grain size analyser for use with sediments 总被引：4，自引：1，他引：4
The qualities of a laser diffraction grain size analyser, the Coulter LS-100 (range claimed by the manufacturer: 0·4–900 μm in a single measurement), are evaluated on sediments of fluvial and lacustrine origin. Accuracy and resolution of measurement on standard latex spheres are excellent. Reproducibility of the results on natural sediments appears to be satisfactory, but the method underestimates the fraction of clay particles with an efficiency of detection (36–70%) proportional to the clay content determined from pipette analysis. This efficiency is somewhat higher than those reported from other instruments of the same generation. Comparison of the Coulter LS-100 with other sizing techniques shows good agreement with the sieving method but some differences appear with the electroresistance particle technique: median and mean size values measured by the Coulter Counter TA1 are systematically lower than those obtained by the Coulter LS-100. Analyses show good correlation with those of a Malvern Laser particle analyser but a discrepancy appears with very fine silt and clay sized sediments. The Coulter LS-100 detects a higher clay content than that measured with the Malvern Laser Sizer 2600. Except when precise measurements of clay content are needed, the Coulter LS-100 produces precise and accurate results in size ranges required for geological and environmental studies. 相似文献
5.
汕头近岸海域表层沉积物粒度特征及其输运趋势 总被引：1，自引：0，他引：1
对汕头近岸海域70个站位表层沉积物作了粒度分析和粒度参数计算,以探讨沉积物粒度分布特征。分析结果显示,研究区表层沉积物可划分为9种底质类型,以黏土质粉砂（YT）、砂质粉砂（ST）和砂-粉砂-黏土（S-T-Y）为主;砾、砂、粉砂和黏土的平均含量分别为1.4％,29.2％,51.0％,18.4％。平均粒径在0.12~7.30 之间变化,平均值为5.53 ;分选系数、偏态和峰态值的变化范围分别为0.50~2.94,-0.65~0.30和0.63~2.67,对应的平均值为1.82,-0.02和1.11。根据粒度分析结果,结合系统聚类方法和因子分析方法将研究区分为四类沉积区,分别代表不同的沉积环境,并应用GSTA模型分析了沉积物净输运趋势。结果显示,在汕头港水深＜10 m的海区,径流来沙和海域来沙有在榕江入海口和近岸汇聚的趋势;水深＞10 m的海区,沉积物呈现出明显的沿海岸线东北向输运的特征;在柘林湾,沉积物主要表现为弱的由海岸/海岛向海湾输运的特征。粒径趋势模型所揭示的这种沉积物输运格局与研究区的物源和水动力状况较好吻合,可为研究区港口建设和航道管理的决策提供参考资料。 相似文献
6.
This paper examines the surface sediments collected from Dongping Lake in China for speciation and distribution of toxic heavy metals (Cu, Pb, Ni, Cd) in different grain size fractions, and for the factors that need to be considered in potential hazard of metals to the environment. Four grain size fractions (<63, 63–78, 78–163 and 163–280 μm), divided in wet condition, and bulk samples less than 280 μm in diameter were analyzed for their distribution, density and appearance. A three-stage extraction procedure following the BCR protocol was used to chemically fractionate metals into “acid soluble”, “reducible”, “oxidizable” and “residual” fractions. Correlation analysis was used to analyze the datasets. The results showed that <63 μm grain size part constitutes the major proportion of the sediments, but its density is the smallest among the four grain size fractions. In general, the metal content curve against grain size presents “S” distribution, and the highest concentrations do not exist in <63 μm grain size. Appearance observation indicates that the adsorbed substance increases gradually along with the decreasing grain size. The dominant speciation of elements and the extent of pollution are responsible for the metal distribution in different grain size sediments. While studying bioavailability and mobilization of metals, it is advisable to take metal speciation, grain size distribution and density into consideration. 相似文献
7.
Laser diffraction is now widely used for particle size distribution analysis of sediments and soils. The technique can be very precise, and offers advantages of speed and cost over many other methods when used to analyse mixtures of sand, silt and clay. This study presents the results of an experimental investigation that examined the sensitivity of the Beckman-Coulter LS230 instrument to mixtures of different grain populations and differences in particle shape. The instrument was found to have high sensitivity to coarse particles in a finer matrix (detection threshold 1–2%), but much lower sensitivity to finer particles in a coarser mixture (detection threshold 12–17%). Experiments using near-spherical ballotini showed that laser analysis provides very similar values to dry sieving for the mean, median and mode, but for a range of natural sand samples values for the mean, median and mode were offset by 8–21%, with an average of ca 15%, compared with sieving. Analysis using a Beckman-Coulter RapidVUE instrument, which provides both size and shape information, provided support for the hypothesis that the differences between laser analysis and sieving are partly attributable to the effects of particle shape. However, an additional factor is the way in which the laser software interprets the optical diffraction data. The software predicts a high degree of log-normality in the size distribution, such that highly skewed, truncated or bimodal samples are poorly represented. Experiments using sieved fractions of ballotini indicated that, even with near-perfectly spherical particles, the particle size distribution predicted by the laser software includes a relatively large percentage of particles outside the sieve class limits. 相似文献
8.
9.
文章以滇东南浅水湖泊异龙湖作为研究对象,通过对湖泊不同位置的40个表层沉积物样品进行粒度测试,结合流域自然地理要素和人类活动特征,分析了异龙湖表层沉积物粒度空间分布特征,并探讨了其影响因素。结果表明,异龙湖表层沉积物沉积类型主要有粘土质粉砂、粉砂质粘土以及砂-粉砂-粘土3种,其中以粘土质粉砂类型为主,其次为粉砂质粘土。粉砂(4~63μm)为异龙湖表层沉积物优势粒径成分,其含量介于57.08%~82.41%,其次为粘土(小于4μm),介于11.22%~35.58%,砂组分(大于63μm)含量最低,含量介于0.16%~25.80%。异龙湖表层沉积物具有明显的空间分布特征,其中粉砂类似同心圆的空间分布特征,其含量由湖区的中间地带分别向西北、西南、东南3个方向递增;而粘土含量则呈现出相反的趋势。由于受断层影响,异龙湖表层沉积物各粒度组分形成了西北、东南两个相对对称的区域;西北湖区沉积物粒度分布特征同时受自然环境与人类活动的影响,沉积物类型主要有粘土质粉砂和粉砂质粘土,其中以粘土质粉砂为主;而东南深水湖区由于受人为干扰因素较弱,可以视为认识自然状态下物质搬运过程、探讨水动力特征以及研究自然湖泊沉积和气候变化的理想场所。 相似文献
10.
本研究通过对长江口现代潮滩6个柱状样沉积物的粒度精细分析,试图提取研究区潮滩沉积相识别的粒度敏感指标,并通过对长江三角洲南部平原一个全新世钻孔(SL67孔)潮滩沉积物的粒度研究,检验现代沉积粒度敏感指标在全新世钻孔潮滩沉积相识别中的应用。研究显示,长江口现代高潮滩和中潮滩的黏性颗粒(8μm)和粗粉砂(32~63μm)含量差异显著,可以成为区分高潮滩和中潮滩的敏感组分;在开敞型的中、低潮滩之间,砂(63μm)和细粉砂含量(8~32μm)也差异明显。长江口现代潮滩沉积物的粒度频率曲线及众数值也可以有效协助区分高潮滩、中潮滩和低潮滩沉积物。利用上述粒度敏感组分和众数指标检验SL67孔全新世早中期在海平面波动控制下的潮滩演替过程,并揭示了7.5 cal ka BP前后的一次海平面加速上升事件。 相似文献
11.
对大型湖泊盆地沉积物粒度组成进行研究,有助于解读全球致密油气和页岩油气勘探开发与其记录的古气候信息。
文章对青海湖沉积物粒度时空分布进行了详细的研究,通过采集覆盖大部分湖区的27根近现代沉积岩芯,并对湖心的三根
典型沉积岩芯进行了137Cs测定获取沉积岩芯的年龄;基于磁化率地层年龄模式,建立了整个湖区沉积岩芯的年代框架。粒
度分析结果显示,青海湖岩芯沉积物的粒度分布呈多峰,以细颗粒沉积为主,其中粉砂含量60%~70%,粘粒组分为10%~
35%,砂粒组分低于20%。青海湖沉积物的粒度变化在空间上相对较复杂,中值粒径呈现明显的砂岛附近、西部和西南湖
区高,其他湖区低的特征。在时间上,大体上自1960年到2017年呈现变粗的趋势,砂粒组分增多,粘粒组分减少。这些粒
度的时空变化可能是受风砂活动、流域土壤侵蚀、河流径流变化、湖平面变化和人类活动共同作用而成。 相似文献
12.
对大型湖泊盆地沉积物粒度组成进行研究，有助于解读全球致密油气和页岩油气勘探开发与其记录的古气候信息。
文章对青海湖沉积物粒度时空分布进行了详细的研究，通过采集覆盖大部分湖区的27根近现代沉积岩芯，并对湖心的三根
典型沉积岩芯进行了137Cs测定获取沉积岩芯的年龄；基于磁化率地层年龄模式，建立了整个湖区沉积岩芯的年代框架。粒
度分析结果显示，青海湖岩芯沉积物的粒度分布呈多峰，以细颗粒沉积为主，其中粉砂含量60%~70%，粘粒组分为10%~
35%，砂粒组分低于20%。青海湖沉积物的粒度变化在空间上相对较复杂，中值粒径呈现明显的砂岛附近、西部和西南湖
区高，其他湖区低的特征。在时间上，大体上自1960年到2017年呈现变粗的趋势，砂粒组分增多，粘粒组分减少。这些粒
度的时空变化可能是受风砂活动、流域土壤侵蚀、河流径流变化、湖平面变化和人类活动共同作用而成。 相似文献
13.
Charles E. Weaver 《Sedimentary Geology》1980,27(4):301-313
Fine-grained sediments and rocks containing a high percentage of phyllosilicate minerals have never been satisfactorily classified. Rocks names are poorly defined. The definition of many terms such as clay, clay mineral and shale are logically inconsistent. The major problems are caused by the assumption that there is a fixed relation between grain size and mineralogy and that structure is a basic parameter.Shallow-buried recent and ancient marine sediments with a high content of phyllosilicates commonly contain 60–80% clay and 20–40% silt. Phyllosilicates are present in approximately the same amounts as the clay-size material. Many fine-grained sediments that have been deeply buried commonly contain 30–40% clay; the phyllosilicate mineral content is in the range of 60–80%.In most fine-grained sediments, as deposited, the majority of the material is in the clay size. With burial and diagenesis, much of the clay-sized material grows to silt size. Thus, claystones are converted to siltstones.The term physil, an abbreviated form of phyllosilicate, is proposed to describe all sheet silicate minerals regardless of grain size. Physilites are rocks with a high content of physils. A simple classification is proposed in which size, mineralogy and structure are treated as independent variables. 相似文献
14.
Oxygen bulk diffusion measurements and TEM characterization of a natural ultramylonite: implications for fluid transport in mica-bearing rocks 总被引：1，自引：0，他引：1
Oxygen bulk diffusion rates were experimentally determined in a natural ultramylonite sample ( c . 5 μ m grain size; 15–20% biotite, 20% quartz, 60–65% feldspars, and minor Fe-oxides) from the Gerrish Island shear zone, SE Maine, USA. The diffusion experiments were performed at 250–550 °C and 100 MPa water pressure. Oxygen bulk diffusion rates were determined both parallel and perpendicular to the strong foliation of the sample. The Arrhenius parameters for transport parallel to the foliation are: D bulk0 =2.0×10−11 m2 s−1 and Q =30±6 kJ mol−1 . The bulk diffusivity perpendicular to the foliation is about a factor of 3.5 less than that parallel to the foliation with the same activation energy. The values of bulk diffusivity and activation energy obtained are consistent with ionic diffusion through a static aqueous fluid, suggesting that an interconnected fluid exists in the ultramylonite even under hydrostatic conditions. The microstructure of the ultramylonite was characterized using transmission electron microscopy (TEM). The nature and distribution of the interconnected fluid cannot be completely resolved from the TEM analysis; however, the low percentage of three-grain channels and open grain/interphase boundaries suggests that the fluid resides as a thin film on the grain surfaces. The results of this study have direct applications in many important geological settings and provide valuable insights into the observed rapid diffusion rates, strong lithological control and pervasive nature of fluid transport in mica-bearing rocks. 相似文献
15.
Geochemical, mineralogical and sedimentological studies on the Taklimakan Desert sands 总被引：7，自引：0，他引：7
Major-element composition, mineral composition and grain-size distribution have been studied for Quaternary aeolian sediments from the Taklimakan Desert, north-western China, together with the variation of chemical and mineralogical compositions of different grain-size fractions. Aeolian sediments from the Taklimakan Desert have higher ratios of feldspar/quartz and calcite/quartz, finer grain size, poorer roundness of quartz and feldspar grains and lower abundances of frosted quartz, than found in aeolian sediments from other deserts such as the Saudi Arabian Desert. In spite of these immature mineralogical and sedimentological features, the aeolian sediments from the Taklimakan Desert show low regional variations in major-element and mineral compositions and are homogenized. These observations confirm that two processes, glacial activity within surrounding mountains and aeolian activity at the Tarim Basin, are important in the homogenization of the Taklimakan Desert sands. Taklimakan Desert sediments are constantly and effectively supplied from basement rocks in the surrounding mountains by glacial erosion. The supplied sediments are further homogenized by aeolian activity in the desert and are partly blown away, serving as the source of Chinese aeolian loess. Compositional differences are observed between loess (mainly 10–40 μm particles) and the <45 μm fraction of the Taklimakan Desert sediments, as well as between loess and whole rock of the Taklimakan Desert sediments. These observations provide constraints for precise modelling of loess formation, and for assessment of the chemical composition of the upper continental crust based on the chemical composition of aeolian loess. 相似文献
16.
Aeolian deposits can provide a sensitive record of climatic change. Two abrupt changes in grain size and accumulation rate have been identified at c . 2.4–2.6 Ma and 1.1–1.2 Ma in the loess–palaeosol–red clay sequences from the Loess Plateau of China. These changes are apparent in two major stepwise increases in grain size and accumulation rate following two abrupt prominent change events of grain size, implying a two-step reorganization that was probably connected with two abrupt environmental change events. The correlation among different sections suggests that regional rather than local environmental processes are responsible for these changes. These changes likely record abrupt fluctuations in winter monsoon and the provenance of sediments associated with renewed Plio-Pleistocene uplift of the Tibetan plateau, and its role on climate and detrital sediment yield. 相似文献
17.
To evaluate the magnitude of variation in grain size distribution in the Krishna river, bed sediments and suspended sediments collected along the length of the river have been studied. There are both temporal and seasonal variation in the grain size distribution of suspended sediments. The statistical parameters show the change along the river in a non-linear fashion which may be due to human interference and due to different types of sediments contributed by tributaries to the Krishna river. The suspended sediments are mostly fine silt (4 to 16m), poorly sorted, showing coarse to fine skewed and are platyto leptokurtic. The bed sediments are mostly medium sand (350m) showing moderate to well sorted, coarse to fine skewed and are platy- to leptokurtic. The CM diagram of Krishna river bed sediments suggests that deposition takes place by (1) rolling (2) rolling and suspension and (3) graded suspension. The suspended sediments represent deposits of uniform suspension. 相似文献
18.
热带东太平洋8001柱状样晚第四纪以来放射虫标志种Buccinospharea invaginata和Collosphaera tuberosa的研究发现, 它们的初现面(FAD) 出现于柱深22cm和45cm处, 年龄分别为0.21Ma和0.42Ma.它们的初现面年龄与SPECMAP氧同位素记录结合为该柱建立了地层框架.该柱放射虫丰度、生源蛋白石和有机碳含量、粒度的分析显示, 大约在氧同位素11、9~8.4、5~3和1期, 高的放射虫总丰度、第四纪常见种丰度和始新世-渐新世种丰度大致对应于高的中值粒径和平均粒径, 以及大约氧同位素5期以来增加的有机碳含量, 表明此期间贸易风增强, 搬运的陆源颗粒增大, 北赤道洋流加强, 导致上升流增强, 表层水生产力提高, 同时, 南极底层流的活动也加强.大约在氧同位素10、8.3~6和2期, 低的放射虫总丰度、第四纪常见种丰度和始新世-渐新世种丰度大致对应于减小的中值粒径和平均粒径, 反映此期间贸易风减弱, 搬运的陆源颗粒减小, 北赤道洋流减弱, 导致上升流消失, 表层水生产力降低, 同时, 南极底层流的活动也减弱. 相似文献
19.
20.
E. Molinaroli S. Guerzoni G. De Falco A. Sarretta A. Cucco S. Como S. Simeone A. Perilli P. Magni 《Sedimentary Geology》2009,219(1-4):196-207
A comparison was made of shallow water sediments from the Lagoon of Venice (LV) and the Lagoon of Cabras (LC), comparing depositional environments and exploring the relationships between hydrodynamics and sedimentological parameters. The two water bodies are very different in size (LV: 360 km2; LC: 22 km2), and the sediments predominantly consist of silty-clay (LV: Mz ≈ 26 μm; LC: Mz ≈ 6 μm). However, there are large differences between the two lagoons with respect to sand (LV: mean 19%; LC: mean ~ 3%) and clay (LV: mean 20%; LC: mean 45%) contents. The Lagoon of Venice (mean depth ~ 1 m) can be considered a tidal basin, whereas the Lagoon of Cabras (mean depth ~ 2 m) has the character of a coastal lake in which wind is the main hydrodynamic forcing factor. A comparison of sediment grain-size distributions with water circulation patterns in different parts of the lagoons highlighted some interesting differences. Grain-size analyses of samples reveal a deficiency of particles around 8 μm in the LC, which is interpreted as reflecting the transition between cohesive flocs/aggregates and non-cohesive coarser silt particles, while the transition limit in the LV is ~ 20 μm. Thus, particles are cohesive below 8 μm in the LC and below ~ 20 μm in the LV. This is probably because of the differences in the clay/silt ratio, which is much lower in the LV (~ 0.3) than in LC (~ 1), conferring a “silt-dominated network structure” on most of the LV sediments.The hydrographical data used were root mean square velocity (RMSV) and water residence time (WRT), computed under the main forcing conditions. The results show a general correlation between RMSV and sortable silt in the LC, and between RMSV and coarser sediments (63–105 μm) in the LV. Some significant differences between the lagoons were detected in the degree of correlation between WRT and grain size. Root mean square velocity (~ 7 cm s− 1 in the LV and ~ 3 cm s− 1 in the LC) was a greater forcing factor in the LC than in the LV. Conversely, WRT, which is on average ~ 16 days in the LV and ~ 19 days in the LC, has more influence in the LV. This study highlights the usefulness of comparing environments with different hydrodynamic energies, e.g., tidal and/or wind-driven currents, to elucidate and thereby improve our understanding of the processes governing the spatial distribution of sedimentological features, the transport mechanisms of sediments, and the relationship between them. The results demonstrate that the approach outlined in this study has the potential to provide a universal hydro-sedimentological classification scheme. 相似文献