共查询到20条相似文献，搜索用时 218 毫秒
1.
利用压力资料预测油（气）水界面方法的修正 总被引：2，自引：0，他引：2
文章在充分研究了原有压力法计算油(气)水界面海拔公式中存在的缺陷后,指出应引入含水饱和度参数对公式进行修正。修正后的公式所计算的油(气)水界面海拔值与实际值更接近,而且还能得出不同的含水饱和度界面海拔值。这由两个实际气藏的应用得到验证。 相似文献
2.
3.
《Geomechanics and Geoengineering》2013,8(3):221-236
This paper presents a new point-to-face contact algorithm for contacts between two polyhedrons with planar boundaries. A new discrete numerical method called three-dimensional discontinuous deformation analysis (3-D DDA) is used and formulations of normal contact submatrices based on the proposed algorithm are derived. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. This approach does not need to use an iterative algorithm in each time step to obtain the contact plane, unlike the ‘Common-Plane’ method applied in the existing 3-D DDA. In the present 3-D DDA method, block contact constraints are enforced using the penalty method. This approach is quite simple, but may lead to inaccuracies that may be large for small values of the penalty number. The penalty method also creates block contact overlap, which violates the physical constraints of the problem. These limitations are overcome by using the augmented Lagrangian method that is used for normal contacts in this research. This point-to-face contact model has been programmed and some illustrative examples are provided to demonstrate the new contact rule between two blocks. A comparison between results obtained by using the augmented Lagrangian method and the penalty method is presented as well. 相似文献
4.
传统的离散元类数值方法存在处理角-角接触时接触力方向不确定、三维情形时接触计算极其复杂等问题。Munjiza提出的基于势的接触力计算方法很好地解决了这一问题,但同时存在势的物理意义不明确,计算出的接触力与物理直观不符、相同嵌入量计算的接触力大小不一致等问题。在已有研究的基础上,提出了一种基于统一标定的势接触力计算方法,该方法重新定义了势函数,即三角形单元内一点的势与该点到3条边的最短距离成正比。采用这种势函数定义可以对嵌入量进行统一表征。在相同的嵌入量下,计算的接触力大小是一致的,同时保留基于势的接触力计算方法所有优点。新定义的势函数,解决了原有势函数所存在的重大缺陷,只要重叠区域不变,计算的总接触力是不变的,接触力计算具有局部特性,而与划分的三角形单元的整体形状和大小无关,即新的接触力计算方法,具有更好的网格鲁棒性。该方法使得基于势的接触力计算方法建立在坚实的物理基础之上,意义重大。 相似文献
5.
The discontinuous deformation analysis (DDA) is a discontinuum‐based method, which employs a penalty method to represent the contact between blocks. The penalty method is easy to be implemented in the program, but the contact constraint is only approximately satisfied. Penetrations between contacting blocks are unavoidable even if the penalty value is very large. To improve the contact precision in the DDA, an augmented Lagrangian method is introduced, which can make use of advantages of both the Lagrangian multiplier method and the penalty method. This paper provides a detailed implementation of the augmented Lagrangian method in the DDA program and compares it with the standard DDA on the computational efficiency and contact precision. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
6.
Traditional approaches in contact mechanics demand complicated search algorithms at the interface between the contacting bodies. Recently, a new contact method based on the concept of a third medium has been developed, which overcomes the drawbacks of conventional contact mechanics techniques. This new scheme is based on a space filling mesh, in which the contacting bodies can move and interact. The ability and accuracy of this method in predicting displacements, as well as the contact forces, is validated by solving selected numerical examples. The potential merits of this method for analysing geotechnical problems by the finite element method are addressed. 相似文献
7.
数值流形法（NMM）在接触处理过程包括：接触方式判断,包括点-点和点-线接触;开-闭迭代,确定块体系统的约束状态;以及接触传递,将有效的接触对传递到下一个时步。过程稍显繁琐和耗时,且与真实的物理接触状态有异。由Munjiza所提出的NBS（no binary search）接触检测算法,将单元映射到规则格子中,以链表结构将其有效地连接在一起,只在单元所在格子以及周围格子内部进行接触判断,接触检测效率大为提高,计算量仅随单元数线性增长,内存需求也很低。在计算接触力时以所定义的势为媒介,用重叠面积来衡量接触力的大小,属于分布式接触力,更接近于实际,避免了原NMM接触处理过程的繁琐。因此,将其作为一种平行的接触处理方法引入到NMM中,并以算例验证,证实了算法的可行性。 相似文献
8.
9.
A spatial hashing method was introduced to accelerate the contact detection process in the numerical manifold method. All objects (blocks) in the work space are hashed to a one dimensional hash table based on a spatial grid, then only blocks within the same place in the hash table need to do contact detection. The proposed method has a time complexity of O(n). Experiments show that the spatial hashing contact detection has a significant improvement in performance. 相似文献
10.
A smoothed particle hydrodynamics (SPH) framework for three-dimensional dynamic soil-multibody interaction modeling is presented, where both soils and rigid bodies are discretized using SPH particles. In the framework, soils are modeled using the Drucker-Prager model, while rigid bodies are considered with a multibody dynamics solver. A hybrid contact method suitable for three-dimensional simulations is developed to model the soil-body and body-body frictionless and frictional contacts, where contact forces are calculated based on ideal plastic collision and the unit normal/tangential vectors of the actual surface. Owing to its simplicity in contact detection and accuracy in contact force calculation, the hybrid contact method can be easily incorporated into SPH. Furthermore, graphics processing unit (GPU) parallelization is utilized to improve efficiency. The presented numerical framework and the hybrid contact method are validated using several examples. Numerical results are compared with analytical solutions and results from the literature. Furthermore, two three-dimensional simulations involving dynamic soil-multibody interaction are included to demonstrate the application. 相似文献
11.
油气水界面追溯法——研究烃类流体运聚成藏史的一种重要方法 总被引：19，自引：0，他引：19
通过对塔里木盆地多个油气藏的油气水界面演化史与成藏期的综合分析 ,认为油气水界面追溯法是研究烃类流体运聚成藏期与成藏演化史的一种十分有效的方法。其确定成藏期、恢复成藏演化史的基本原理是 ,规则油气藏形成时其油气水界面通常为一水平的界面 ,以后因构造变动等影响 ,油气水界面可能发生变迁 ,直至构造稳定期其油气水界面又重新演变为水平的界面。因此 ,可以通过对油气藏油气水界面演变史的分析 ,研究油气藏的形成演化历史。具体做法是 ,首先编制大比例尺圈闭发育史剖面图 (或平面图 ) ,然后计算现今油气藏的油气水界面在各地质历史时期的古埋深 ,并标于相应时期的剖面图 (或平面图 )上 ,则现今油气水界面埋深最早形成水平直线或水平界面的时间 ,即是油气藏的形成时间。其后的油气水界面变迁则纪录了油气藏形成以后调整、改造乃至破坏的历史 相似文献
12.
任意形状块体的接触模拟是发展三维不连续变形分析方法（3D-DDA）的关键问题。提出了三维离散块体单元的 边-边接触模型,并给出了边-边接触进入面的判定方法和嵌入准则。基于矢量分析和罚函数法,推导了接触子矩阵的表达式,算例分析结果表明了该模型的有效性。 相似文献
13.
双曲线接触面本构模型能比较真实地模拟堆石材料与混凝土面板间的接触关系,扩展Lagrange乘子法能比较精确地计算接触面间接触状态。在吸取Clough双曲线接触面本构关系应用于无厚度的Goodman单元和有厚度的Desai薄层单元的成功经验的基础上,将Clough双曲线接触面模型引入扩展Lagrange乘子法进行摩擦接触问题的求解。介绍了基于扩展Lagrange乘子法的序列二次规划法（SQP）提法,详细推导了在扩展Lagrange算法的非线性接触计算中引入Clough双曲线接触面本构关系的数值列式和实施步骤。数值算例和工程实例的计算结果证明该方法是成功的,能够比较真实地模拟堆石-混凝土墙（混凝土面板）之间的接触状态。 相似文献
14.
Generalized contact model for polyhedra in three‐dimensional discontinuous deformation analysis 
下载免费PDF全文
下载免费PDF全文 We present a generalized contact computation model for arbitrarily shaped polyhedra to simplify the contact analysis in discontinuous deformation analysis. A list of generalized contact constraints can be established for contacting polyhedra during contact detection. Each contact constraint contains information for 2 contact points, unique contact plane, and related contact modes (open, locked, or sliding). Computational aspects of the generalized contact model include identification of contact positions and contact modes, uniform penalty formulation of generalized contact constraint, and uniform updating of contact modes and contact planes in the open‐close iteration. Compared with previous strategies, the generalized contact computation model has a simpler data structure and fewer memory requirements. Meanwhile, it simplifies the penalty formulation and facilitates the open‐close iteration check while producing enough accuracy. Illustrative examples show the ability of the method to handle the full range of polyhedral shapes. 相似文献
15.
胶结颗粒接触力学特性测试装置研制 总被引：5，自引：2，他引：3
为验证天然结构性砂土离散元模拟中接触模型及其参数的合理性,设计了一套用于理想胶结颗粒成型及实现不同加载条件下接触力学特性测试装置。通过胶结颗粒成型装置在两大小相同的铝棒间形成具有特定几何尺寸的胶结物,随后,采用一系列辅助加载装置实现简单及复杂加载条件下胶结颗粒接触力学特性的测试。试验结果表明：该装置可用于胶结颗粒在不同加载条件下接触力学特性的测试,实测胶结颗粒接触力学响应与天然砂土离散元中接触模型基本相符,且其抗剪和抗扭强度均随着法向压力的增大而增大,在三维应力空间中胶结颗粒强度包线呈椭圆抛物面状。 相似文献
16.
In this paper, a new disk-based DDA formulation is presented. In the original disk-based DDA, disks are considered to be rigid and the penalty method is used to enforce disk contact constraints. In order to improve the accuracy of the disk-based DDA, new formulations of stiffness and force matrices for non-rigid disks using a new efficient contact model are presented in this paper. Blocks are considered deformable without need to do more computations for contact detection. In the proposed contact model, disk–disk and disk–boundary contacts are transformed into the form of point-to-line contacts and normal spring, shear spring and frictional force sub-matrices are derived by vector analysis. The penalty method is quite simple to implement, but has some major disadvantages. In the presented contact model, not only the simplicity of the penalty method is retained but also the limitations are overcome by using the augmented Lagrangian method. Moreover, unlike the contact model used in the original disk-based DDA, reference line can be obtained directly by using only coordinates of disk centers and their radii, and no more computations are needed. The validity and capability of the new disk-based DDA formulation are demonstrated by several illustrative examples. 相似文献
17.
通过定义距离势函数,提出一种适用于空间任意凸多面体单元的三维距离势函数离散单元法。该方法采用归一化的计算方式,将势函数表征为接触体间的距离函数,并基于此建立接触力计算方程,明确了势函数的物理意义,使接触力计算更加合理,无需对各种可能的接触形式进行差异化处理。新方法克服了原有势函数物理意义不明、接触力计算受单元形式影响等重要缺陷,并突破了四面体单元的限制,可采用空间任意凸多面体单元。通过若干算例说明新方法的正确性和有效性。数值模拟结果表明新方法能够很好处理空间任意多面体单元复杂接触变换过程,准确处理复杂非连续介质的运动过程。 相似文献
18.
19.
建立了求解自然裂纹和水力裂纹扩展的扩展有限元法,对裂纹附近区域的节点采用广义形函数,并采用线增函数消除混合单元,以提高裂纹附近的精度。引入水力劈裂的非耦合模型,即假设裂纹中的水压力为均布力;用砂浆法（线段-线段接触法）结合增广型拉格朗日乘子法处理受压裂纹段的接触条件。并通过算例分析了以下内容：计算了受压裂纹和裂纹面分布均布水压力的水力裂纹的应力强度因子,并与解析解进行了比较,结果表明,提出的方法具有很高的精度;模拟了水力裂纹对自然裂纹面的影响,并分析了自然裂纹面上的接触力和接触状态。 相似文献
20.
提出了利用Lagrangian乘子网格来模拟顺层边坡层间结构面接触行为的方法,并推导了考虑接触约束的Lagrangian控制方程的弱形式及其有限元离散方程。Lagrangian乘子网格容许界面出现较大的切向滑移,较好地解决了接触问题中的高度非线性和响应不平滑性。应用以上方法对沪－蓉－西高速公路某顺层岩质高边坡进行了数值模拟分析,得到了临滑状态下的位移场、应力应变场、结构面上的接触状态、层间滑移距离以及接触摩擦力的分布规律。数值模拟结果表明,顺层岩质边坡的破坏是一个渐进的过程,由最初的层间错动,发展为顺层蠕滑,最后在坡底剪出而破坏;其破坏型式由最初的顺层滑动逐步向溃曲破坏转化。 相似文献