共查询到18条相似文献，搜索用时 539 毫秒
1.
适用于饱和砂土循环动力分析边界面塑性模型的显式积分算法 总被引：1，自引：0，他引：1
基于适用于饱和砂土循环动力分析的边界面模型,利用修正广义Mises方法将其推广至三维应力空间中,引入与状态相关的剪胀函数,采用历史最大加载面硬化准则,以反映饱和砂土排水条件下刚度变化、剪胀剪缩等特性。结合子增量步显式积分算法的思想,建立了适用于饱和砂土循环动力分析边界面模型的显式积分算法流程。借助有限元软件子程序接口,将该算法流程开发到有限元软件中,通过建立土体单元数值模型,对Toyoura砂在单调荷载和循环荷载下的三轴试验工况进行模拟。结果表明,利用子增量步显式积分算法对模型进行积分,能够准确有效地模拟砂土的应力-应变曲线、以及砂土在单调和循环荷载作用下均展现的剪胀剪缩现象,验证了显式积分算法的有效性。通过设置不同的增量步长,验证了子增量步显式积分算法对于较小应变增量步的高度稳定性和收敛性。 相似文献
2.
《岩土力学》2017,(12):3436-3444
保持经典弹塑性本构模型切面算法简单高效的框架,并将其进行扩展,使之适用于边界面类模型的隐式数值计算;通过在算法中引入了确定最大容许步长概念,提出了基于自适应子步迭代的改进切面算法。以一个新改进的结构性黏土边界面模型为例,应用切面算法对其进行了数值实现,并对上海黏土室内试验进行了模拟,验证了切面算法的有效性。然后,通过应用上海黏土参数对在不同固结度下的不排水三轴剪切试验、不排水单剪试验以及不排水三轴循环加载试验和一维压缩试验进行数值计算,初步确定了切面算法的最大容许步长。最后,应用改进切面算法模拟了大步长情况下的不排水单剪试验,验证了所提出的改进算法的计算精度和稳定性。 相似文献
3.
4.
基于Wheeler土体各向异性旋转硬化法则,结合边界面理论,构造一个能够反映土体初始各向异性及加载后应力诱发各向异性的边界面本构模型,并借助ABAQUS软件提供的UMAT子程序接口,采用隐式积分算法--图形返回算法实现。通过对正常固结状态下（OCR=1）高岭土试样三轴不排水剪切试验进行模拟,并将模拟结果与ABAQUS自带的修正剑桥模型模拟结果进行了比较分析,表明本模型的模拟结果能够反映土体在偏压加载过程中产生的各向异性现象。在此基础上,采用本模型对中等超固结（OCR=4）高岭土试样三轴不排水剪切试验进行模拟,并再次与ABAQUS自带的修正剑桥模型模拟结果进行比较,表明本模型能够较好地反映中等超固结土在小应变情况下的非线性特性。相比于经典弹塑性模型,如修正剑桥模型,本模型的模拟结果更符合中等超固结土的变形特性。 相似文献
5.
考虑循环载荷下饱和黏土软化的损伤边界面模型研究 总被引：1，自引：0，他引：1
研究表明,循环载荷作用下饱和黏土将发生软化,其机制主要有两个：一是孔压的积累;二是土体原有结构的不断损伤和新结构的不断重塑。针对上述机制,基于广义各向同性硬化准则建立了考虑饱和黏土循环软化的损伤单面模型。该模型在有效应力空间中引入损伤变量,表征土体结构的损伤和重塑程度,在连续的循环加载下,损伤不断累积,边界面则随着损伤的累积不断收缩,以模拟饱和黏土刚度和强度的软化;以应力反向点作为边界面的广义各向同性硬化中心和映射法则的映射中心,灵活地选择塑性模量的插值公式以模拟塑性变形和孔压的累积以及应力-应变的滞回特性。应用该模型对不排水循环三轴试验进行模拟,并且考查了循环周次、循环应力水平和固结历史对饱和黏土循环软化特性的影响,并与相关试验比较,验证了模型的有效性。 相似文献
6.
现有的饱和软黏土循环荷载累积孔压显式模型未能反映路基土体单元在土体自重作用下主应力轴的偏转现象。在确定饱和软黏土固结时间的基础上,在固结压力分别为100、150、200 kPa下,对软黏土进行主应力轴偏转角为15°、30°、45°的不排水循环加载试验,得到了固结围压、主应力轴旋转角及动应力比对循环累积孔压影响的规律。基于第一次循环加载累积孔压变化规律和修正动偏应力水平,建立了能考虑恒定主应力轴偏转角循环加载下累积孔压显式模型,并利用恒定主应力轴偏转角循环加载试验结果验证了模型的合理性。建立的循环荷载下饱和软黏土累积孔压显式模型参数易于确定,参数具有明确的物理意义且能考虑主应力轴的恒定偏转现象。 相似文献
7.
适用于砂土循环加载分析的边界面塑性模型 总被引：1，自引：0，他引：1
基于临界状态土力学框架,建立了一个适用于砂土排水循环加载的边界面塑性模型。采用了考虑虚拟峰值应力比的偏应变硬化准则,初始加载阶段应力点位于边界面上,反向加载阶段以历史最大屈服面作为边界面,同时实现了对密砂软化现象的模拟和对历史所受最大应力的记忆。边界面采用修正的椭圆形,引入考虑密度与应力水平的状态相关剪胀函数,采用非相关联流动法则和以应力反向点作为映射中心的径向映射准则。模型仅有10个参数,通过常规三轴试验即可确定,并且使用一套参数可以模拟不同围压、密度的单调和循环加载情况。分别对饱和砂土的单调、循环排水三轴试验进行模拟,结果表明,该模型能够合理地反映饱和砂土排水条件下的应力-应变特性。 相似文献
8.
循环荷载下饱和软黏土的动骨干曲线模型研究 总被引：2，自引：1，他引：1
通过饱和软黏土室内不排水动三轴试验,研究了循环周次和动应力幅值对土体动力特性的影响。结果表明,在循环荷载作用下,随着循环周次的增加,土体均存在不同程度的刚度软化现象。根据动应力幅值大小的不同,循环荷载作用下饱和软黏土的动应变发展形态可分为3种类型:稳定型、破坏型和临界型。根据动应力-应变关系曲线特点,提出了含动应力幅值、固结围压和循环周次等影响因素的动骨干曲线模型。该模型所得的拟合值与试验值比较吻合。与传统骨干曲线模型相比,该模型能够体现土体在循环荷载作用下的刚度软化特性,更加切合实际。 相似文献
9.
天然土体的初始各向异性通常可对其后继循环特性产生显著影响。现有考虑循环载荷作用的土体弹塑性模型,往往采用类似修正剑桥模型的椭圆形屈服面,已有研究表明,该椭圆形屈服面因其拉伸弹性区域偏大,针对天然K0固结状态的土体,其计算精度较差。基于新近提出的广义各向同性硬化准则,在边界面方程中引入初始各向异性张量,并采用空间滑动面破坏准则（SMP）的变换应力法,建立了能考虑饱和黏土初始各向异性的循环边界面塑性模型。分别针对等压和偏压固结的饱和黏土静、动三轴试验进行模拟,结果表明,该模型能合理反映土体的初始各向异性及其后继循环动力特性。 相似文献
10.
主应力旋转将加速孔压和塑性应变的累积,影响土体的力学特性。为研究主应力轴循环旋转对 固结饱和粉质黏土孔压和变形的影响,利用GDS-HCA试验系统开展了不同应力路径的 固结饱和粉质黏土不排水循环三轴试验和循环扭剪试验,研究了主应力轴循环旋转对 固结饱和粉质黏土累积塑性应变、孔压等动力特性的影响。结果表明：动剪应力幅值、心形应力路径所包围的面积、循环偏应力幅值等均随循环剪应力比和循环动应力比的增大而增大。试样未发生破坏时, 固结饱和粉质黏土的孔压比随着振动荷载作用次数的增加而增大;当试样发生破坏时,孔隙压力迅速消散,孔压比急剧下降。循环扭剪试验时试件产生的轴向累积塑性应变始终大于循环三轴试验产生的累积塑性应变,说明主应力轴循环旋转会加速试件轴向应变的累积。试件的累积塑性应变随循环剪应力比和循环动应力比的增大而增大。循环动应力比越大时,主应力轴旋转造成的轴向累积塑性应变差异越显著。在Monismith幂次函数模型的基础上,建立了主应力轴循环旋转条件时K0固结饱和粉质黏土累积塑性应变方程,并对模型的可靠性进行了分析和验证。 相似文献
11.
The cyclic behaviours of embedded offshore structures under different cyclic loading levels are related to the cyclic shakedown and degradation of the surrounding soils. In the present study, a damage-dependent bounding-surface model based on a newly proposed hardening rule was developed to predict the cyclic shakedown and degradation of saturated clay and the effect of the initial anisotropic stress state. By extending the Masing’s rule to the bounding-surface plasticity theory, the stress reversal point is taken as the generalised homological centre of the bounding surface. With movement of the generalised homological centre, at lower stress amplitudes, the cyclic process ends at a steady state, and cyclic shakedown is reached. At higher stress amplitudes, a damage parameter related to the accumulated deviatoric plastic strain is incorporated into the form of the bounding surface, which is hence able to contract to model degradations in stiffness and strength. To take into account the effects of initial anisotropic conditions on the cyclic behaviour of soils, an initial anisotropic tensor is introduced in the bounding surface. The developed model is validated through undrained isotropic and anisotropic cyclic triaxial tests in normally consolidated and overconsolidated saturated clay under both one-way and two-way loadings. Both cyclic shakedown and degradation are well reproduced by the model, as is the anisotropy effect induced by the initial anisotropic consolidation process. 相似文献
12.
In this paper, a simple bounding surface plasticity model is used to reproduce the yielding and stress–strain behavior of the structured soft clay found at Shanghai of China. A series of undrained triaxial tests and drained stress probe tests under isotropic and anisotropic consolidation modes were performed on undisturbed samples of Shanghai soft clay to study the yielding characteristics. The degradation of the clay structure is modeled with an internal variable that allows the size of the bounding surface to decay with accumulated plastic strain. An anisotropic tensor and rotational hardening law are introduced to reflect the initial anisotropy and the evolution of anisotropy. Combined with the isotropic hardening rule, the rotational hardening rule and the degradation law are incorporated into the bounding surface formulation with an associated flow rule. Validity of the model is verified by the undrained isotropic and anisotropic triaxial test and drained stress probe test results for Shanghai soft clay. The effects of stress anisotropy and loss of structure are well captured by the model. 相似文献
13.
In dynamic geotechnical problems, soils are often subjected to a combination of sustained static and fast cyclic loading. Under such loading conditions, saturated and normally consolidated clays generally experience a build-up of excess pore water pressure along with a degradation of stiffness and strength. If the strength of the soil falls below the static stress demand, a self-driven failure is triggered. In this paper, a constitutive model is presented for the analysis of such problems, based on a general multisurface plasticity framework. The hardening behavior, the initial arrangement of the surfaces, and the nonassociated volumetric flow rule are defined to capture important aspects of cyclic clay behavior. This includes nonlinear hysteretic stress-strain behavior, the effect of anisotropic consolidation, and the generation of excess pore water pressure during undrained cyclic loading along with a degradation of stiffness and strength. The model requires nine independent parameters, which can be derived from standard laboratory tests. A customized experimental program has been performed to validate the model performance. The model predictions show a good agreement with test results from monotonic and cyclic undrained triaxial tests, in particular with respect to the strain-softening response and the number of loading cycles to failure. A procedure for a general stress-space implicit numerical implementation for undrained, total stress-based finite element analyses is presented, including the derivation of the consistent tangent operator. Finally, a simulation of the seismic response of a submarine slope is shown to illustrate a possible application of the presented model. 相似文献
14.
Two integration algorithms, namely the implicit return mapping and explicit sub-stepping schemes, are adopted in the anisotropic bounding surface plasticity model for cyclic behaviours of saturated clay and are implemented into finite element code. The model is a representative of a series of bounding surface models that have typical characteristics, including isotropic and kinematic hardening rules and a rotational bounding surface to capture complex but important cyclic behaviours of soils, such as cyclic shakedown and degradation. However, there is no explicit current yield surface in the model to which the conventional implicit algorithm returns the stress state back or the sub-stepping integration corrects the drift of the stress state. Hence, necessary modifications have been made for both of the integration schemes. First, the image stress point is mapped or corrected to the bounding surface instead of mapping back or correcting the stress state to the yield surface. Second, the unloading–loading criterion is checked to determine the image stress point rather than checking the yield criterion after giving the trial stress state in a conventional way. Comparative studies on the accuracy, stability and efficiency of the two integration schemes are conducted not only at the element level but also in solving boundary value problems of monotonic and cyclic bearing behaviours of rigid footings on saturated clay. For smaller strain increments, there is no significant difference in the accuracy between the two integration schemes, but the explicit integration shows a higher efficiency and accuracy. For relatively larger increments, the implicit return mapping algorithm presents good accuracy and more robustness, while the sub-stepping algorithm shows deteriorating accuracy and suffers the convergence problem. With the tolerance used in the present model, the bearing capacity of the rigid footing predicted by the return mapping algorithm is closer to the available analytical and numerical solutions, while the bearing capacity predicted by the sub-stepping algorithm shows a marginal increase. 相似文献
15.
This paper presents a two-surface plasticity model for describing some important features of saturated clay under cyclic loading conditions, such as closed hysteresis loops, cyclic shakedown and degradation, and different stress–strain relations for two-way loading. The model, namely ACC-2-C, is based on the elastoplastic model ACC-2 (an adapted Modified Cam Clay model with two yield surfaces) developed by Hong et al. (Acta Geotech 11(4):871–885, 2015). The small-strain nonlinearity concept is adopted to achieve the nonlinear characteristics of clay during unloading–loading stage. The new hardening law related to accumulated deviatoric plastic strain is proposed for the inner surface to describe the cyclic shakedown and degradation. Following the advantages of the ACC-2 model, the constitutive equations are simply formulated based on the consistency condition for the inner yield surface. The model is conveniently implemented in a finite element code using a stress integration scheme similar to the Modified Cam Clay model. The simulation results are highly consistent with experimental data from drained and undrained isotropic cyclic triaxial tests in normally consolidated saturated clay under both one-way and two-way loadings.
相似文献16.
原状和重塑海洋粘土经历动载后的静强度衰减 总被引：5，自引：0，他引：5
根据海洋粉质粘土原状和重塑土样的动三轴试验结果, 比较和分析了两种土样应力、应变、孔隙水压力和不排水抗剪强度行为, 得到了土样的静不排水抗剪强度衰减与波浪荷载作用下土样产生的动应变以及平均累积孔压之间的关系。 并将波浪荷载作用使土样内孔压升高, 有效应力降低, 形成拟超固结现象的理论, 应用到土样不排水抗剪强度衰减与平均累积孔压之间关系的分析;同时与重塑土样的超固结静态剪切试验结果进行比较, 得到了土样在波浪荷载作用后的归一化不排水抗剪强度与拟超固结比之间的关系式。 建议以少量原状土样, 配合大量重塑土样的动三轴试验结果, 实现对实际海洋粘土地基在波浪荷载作用后的静不排水抗剪强度衰化规律的评估。 相似文献
17.
Rakesh J. Pillai I. Bushra R. G. Robinson 《Geotechnical and Geological Engineering》2013,31(2):801-808
Clays treated with lower cement contents often exhibit behaviour similar to stiff clays with planar failure surface under triaxial compression. In the present work the behaviour of a marine clay treated with 5 % cement, subjected to undrained triaxial compression tests is studied. The pre-consolidation pressure of the cemented clay due to the cementation bonding is observed to be very high. It is attempted to model the behaviour of cement treated clay using a bounding surface plasticity formulation as the plastic behaviour of the cemented clays within the yield surface has to be considered. The effect of cementation is included in the model as the pre-consolidation pressure obtained from consolidation tests. The tensile strength due to cementation bonds is included in the equation of the bounding surface. Simulations of the undrained triaxial compression tests on cemented clays are carried out and the results are validated with the experimental results. 相似文献
18.
随着海洋工程建设的快速发展,海洋环境中的地基稳定性逐渐成为学者和工程师关注的热点问题,建立一个简化的饱和黏土循环加载模型对于长期循环荷载下海上构筑物的设计具有重要意义。针对饱和黏土的循环弱化特性,在Hardin-Drnevich等效非线性模型的基础上,建立了考虑循环弱化的饱和黏土简化非线性模型来描述循环加载下饱和黏土的应力-应变关系,模型中引入了由循环加载期间产生的累积塑性变形控制的强度和模量衰减比公式。通过参数分析,说明了形状参数 与n以及残余衰减比与衰减系数等参数的意义和作用。通过对文献中单向循环试验和双向循环试验结果的模拟,验证了该简化模型可以较好地描述循环加载时饱和黏土应力应变滞回圈的演变规律以及循环加载后饱和黏土的强度和刚度弱化现象。简化模型大大提高了计算效率,与传统的土体弹塑性模型相比更加便于工程应用。 相似文献