首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Huangshannan magmatic Ni-Cu sulfide deposit is one of a group of Permian magmatic Ni-Cu deposits located in the southern Central Asian Orogenic belt in the Eastern Tianshan, northwest China. It is characterized by elevated Ni tenor (concentrations in recalculated 100% sulfide) in sulfide within ultramafic rocks (9–19 wt%), with values much higher than other deposits in the region. Sulfides of the Huangshannan deposit are composed of pentlandite, chalcopyrite, and pyrrhotite and the host rock is relatively fresh, indicating that the high-Ni tenor is a primary magmatic feature rather than formed by alteration processes. It is shown that sulfides with high-Ni tenor can be generated by sulfide-olivine equilibrium at an oxygen fugacity of QFM +0.5, for magmas containing 450 ppm Ni and 20% olivine. Ores with >10 wt% sulfur have relatively low PGE and Ni tenors compared to other ores, R factor (mass ratio of silicate to sulfide liquid) modeling of Ni indicates that they formed at moderate R values (150–600). Based on this constraint on R values, ores with <10 wt% sulfides in the Huangshannan deposit can be segregated from a similar parental magma with 0.05 ppb Os, 0.023 ppb Ir, and 0.5 ppb Pd at R values between 600 and 3000. This, coupled with the supra-cotectic proportions of sulfide liquid to cumulus silicates in the Huangshannan ores imply mechanical transport and deposition of sulfide liquid in a magma pathway or conduit, in which sulfides must have interacted with large volumes of silicate magma. Platinum and Pd depletion relative to other platinum group elements (PGEs) are observed in fresh and sulfide-rich samples (S > 4.5 wt%). As sulfide-rich samples are also depleted in Cu, and as interstitial sulfides in those samples are physically interconnected at a scale of several cms, the low Pt and Pd anomalies are attributed to solid Pt and Pd phases crystallization and retention with the monosulfide solid solution (MSS) and Cu-rich sulfide liquid percolation during MSS fractionation. This finding indicates that Pt anomalies in sulfide-rich rocks from magmatic Ni-Cu deposits in the Eastern Tianshan are the result of sulfide fractionation rather than a hydrothermal effect. 187Os/188Os(278Ma) values of the lherzolite samples vary from 0.27 to 0.37 and γOs(278Ma) values vary from 110 to 189, indicating significant magma interaction with crustal sulfides, rich in radiogenic Os. Well constrained γOs values and δ34S values (−0.4 to 0.8‰) indicate that crustal contamination occurred at depth before the arrival of the magma in the Huangshannan chamber. Regionally, deposits with high-Ni tenor have not been reported other than the Huangshannan deposit; however, many intrusions with high-Ni contents in olivine are present in NW China, such as the Erhongwa, Poyi and Poshi intrusions. Those intrusions are capable of forming high-Ni tenor sulfides due to olivine-sulfide-silicate equilibrium and relative high-Ni content in parent magma, making them attractive exploration targets.  相似文献   

2.
Partitioning of platinum-group elements (PGE) between sulfide liquid and monosulfide solid solution (mss) has been investigated by crystallizingmss from Fe–Ni–Cu sulfide liquid at 1,000–1,040° C, using bulk compositions and PGE contents typical of magmatic sulfides associated with mafic and ultramafic systems. Products were analyzedin situ for PGE and Au using SIMS. Sulfide liquid compositions were more Ni- and Cu-rich than coexistingmss. Liquid/mss partition coefficients are: Os-0.23±0.04, Ir-0.28±0.11, Ru-0.24±0.05, Rh-0.33±0.06, Pt-4.8±0.7, Pd-4.8±1.9, Au-11.4. Partitioning of PGE is independent of PGE concentration and Ni content in the composition range investigated. Additionally, Henry's law appears to be obeyed up to minor-element contents in the sulfide liquid andmss. Osmium, Ir, Ru, and Rh are compatible elements in the anhydrous Fe–Ni–Cu–S system, whereas Pt, Pd and Au are incompatible elements. These affinities correspond to the partitions of PGE between massive and Cu-rich magmatic sulfides. However, the detailed precious-metal compositions of the Cu-rich sulfides of mafic rock systems, disseminated ores of komatiites and Cu-rich assemblage of droplet ore from the Noril'sk-Talnakh deposits are not consistent with those expected for pristine fractionated sulfide liquids.  相似文献   

3.
LORAND  J P. 《Journal of Petrology》1989,30(4):987-1015
Pyroxenite layers in the orogenic spinel lherzolite massifsof Ari?ge are porphyroclastic textured and range in compositionfrom spinel websterite to garnet clinopyroxenite. Each pyroxenitetype forms individual layers or occurs as part of compositelayers in which the Opx/Cpx and Sp/Gt ratios decrease from marginsto core. They are interpreted as crystalline segregations separatedby flow crystallization from continental tholeiites en routeto the surface. The primary magmatic phases consist of Al-richpyroxenes, together with a minor amount of spinel, which startedto crystallize at 1400?C and 20–22 kb pressure; the pyroxeneshave locally survived plastic strains and subsolidus rccrystallizationsand now occur in the form of clinopyroxene and orthopyroxenemegacrysts displaying unmixing features. Although the differentiated silicate liquid was fully expelledduring the flow crystallization process, the layered pyroxeniteshave concentrated the highly incompatible elements S and Cuand locally display significant chalcophile platinum-group elementenrichment (Pd, Pt). Cu and S behave coherently over the wholerange of pyroxenite composition; their highest concentrationsare found in the thinnest websterite layers or at the marginof composite layers. Microscopic investigation of 214 polishedthin sections shows these elements to be present as accessoryCu-Fe-Ni sulfides interstitial among the silicate phase or formingdiscrete bodies included in the relic pyroxene megacrysts. Allthese features indicate the presence of a sulfide liquid, immisciblewith the silicate magma, during the crystallization of the layeredpyroxenites. Sulfide liquid immiscibility probably occurredin response to thermal contrast between the pyroxenites andthe cooler surrounding peridotites. It is proposed that the megacryst-hosted sulfide inclusionswere trapped as linear arrays arranged on host megacryst growthplanes. Due to the slow cooling and complex unmixing historyof the megacrysts, these arrays have been transformed into coarse,isolated sulfide inclusions by subsolidus migration and spheroidizationprocesses. They started to crystallize at T = 1200?C as monosulfidesolid solution (MSS), probably coexisting with a minor amountof Ni- and Cu-rich sulfide liquid down to r=900?C. The reconstructionof the bulk chemistry of each individual inclusion reveals significantbetween-inclusion variations of Cu/Ni+ Fe and Ni/Fe ratios,which would result from strain-induced immobilization of theseliquids. On cooling, the high-temperature MSS has decomposedbelow 230?C into Ni-rich pyrrhotite, nickeliferous pentlandite,chalcopyrite and minor pyrite. The post-magmatic history ofthe interstitial sulfide grains was not unlike that of the inclusions,except at near-surface temperatures where the primary sulfidesresulting from unmixing of MSS have been partly altered intosecondary sulfides by serpentinizing aqueous fluids. In spite of these post-magmatic alterations, the inclusionsand the interstitial sulfide phases are remarkably homogeneousas regards their bulk Ni/Cu ratio, which is close to 3. Thisvalue is characteristic of sulfide separated from primary ratherthan partially differentiated tholeiitic melts. It is thus concludedthat the continental tholeiite parent to the layered pyroxeniteswas saturated with sulfides when it left its mantle source regioaIn this aspect, it would not be different from MORBs which containsimilar sulfide compositions. In both cases, sulfide fractionationcannot be ignored in models for chalcophile trace element fractionationduring initial evolution of these magmas.  相似文献   

4.
Understanding the geochemical behavior of chalcophile elements in magmatic processes is hindered by the limited partition coefficients between sulfide phases and silicate melt, in particular at conditions relevant to partial melting of the hydrated, metasomatized upper mantle. In this study, the partitioning of elements Co, Ni, Cu, Zn, As, Mo, Ag, and Pb between sulfide liquid, monosulfide solid solution (MSS), and hydrous mantle melt has been investigated at 1200 °C/1.5 GPa and oxygen fugacity ranging from FMQ−2 to FMQ+1 in a piston-cylinder apparatus. The determined partition coefficients between sulfide liquid and hydrous mantle melt are: 750–1500 for Cu; 600–1200 for Ni; 35–42 for Co; 35–53 for Pb; and 1–2 for Zn, As, and Mo. The partition coefficients between MSS and hydrous mantle melt are: 380–500 for Cu; 520–750 for Ni; ∼50 for Co; <0.5 for Zn; 0.3–6 for Pb; 0.1–2 for As; 1–2 for Mo; and >34 for Ag. The variation of the data is primarily due to differences in oxygen fugacity. These partitioning data in conjunction with previous data are applied to partial melting of the upper mantle and the formation of magmatic-hydrothermal Cu–Au deposits and magmatic sulfide deposits.I show that the metasomatized arc mantle may no longer contain sulfide after >10–14% melt extraction but is still capable of producing the Cu concentrations in the primitive arc basalts, and that the comparable Cu concentrations in primitive arc basalts and in MORB do not necessarily imply similar oxidation states in their source regions.Previous models proposed for producing Cu- and/or Au-rich magmas have been reassessed, with the conclusions summarized as follows. (1) Partial melting of the oxidized (fO2 > FMQ), metasomatized arc mantle with sulfide exhaustion at degrees >10–14% may not generate Cu-rich, primitive arc basalts. (2) Partial melting of sulfide-bearing cumulates in the root of thickened lower continental crust or lithospheric mantle does not typically generate Cu- and/or Au-rich magmas, but they do have equivalent potential as normal arc magmas in forming magmatic-hydrothermal Cu–Au deposits in terms of their Cu–Au contents. (3) It is not clear whether partial melting of subducting metabasalts generates Cu-rich adakitic magmas, however adakitic magmas may extract Cu and Au via interaction with mantle peridotite. Furthermore, partial melting of sulfide-bearing cumulates in the deep oceanic crust may be able to generate Cu- and Au-rich magmas. (4) The stabilization of MSS during partial melting may explain the genetic link between Au-Cu mineralization and the metasomatized lithospheric mantle.The chalcophile element tonnage, ratio, and distribution in magmatic sulfide deposits depend on a series of factors. This study reveals that oxygen fugacity also plays an important role in controlling Cu and Ni tonnage and Cu/Ni ratio in magmatic sulfide deposits. Cobalt, Zn, As, Sn, Sb, Mo, Ag, Pb, and Bi concentrations and their ratios in sulfide, due to their different partitioning behavior between sulfide liquid and MSS, can be useful indices for the distribution of platinum-group elements and Au in magmatic sulfide deposits.  相似文献   

5.
Small bodies of pyrrhotite, chalcopyrite, minor pentlandite, and magnetite occur at the peripheries of podiform bodies of chromite in ultramafic ophiolitic rocks at Tsangli, Eretria, central Greece. Banding of magnetite and sulfide within the bodies is reminiscent of magmatic banding. A magmatic origin has been proposed for similar sulfide masses in the Troodos ophiolite (Panayiotou, 1980). The compositions of the host rocks, chromite, and of the sulfides have been investigated. On average, the sulfide mineralization, recalculated to metal content in 100% sulfide, contains 0.55% Ni, 5.15% Cu, 0.29% Co, 9 ppb Pd, 179 ppb Pt, 16 ppb Rh, 112 ppb Ru, 31 ppb Ir, 58 ppb Os, and 212 ppb Au. These metal contents, particularly the high Cu/(Cu+Ni) ratio of 0.78 and the Pt/(Pd+Pt) ratio of 0.95, are inconsistent with the sulfides having reached equilibrium with their Ni rich host rocks at magmatic temperatures and accordingly it is concluded that they are not of magmatic origin. The average 34S value of the sulfide bodies is +2 while that of a sample of pyrite from country-rock schist is –15.6. These values are inconclusive as to the origin of the sulfur. It is suggested that the sulfides have been precipitated by hydrothermal fluids, possibly those responsible for the serpentinization of the host rocks. The source of the metals may have been the host rocks themselves.  相似文献   

6.
Experiments were performed in the system O–S–Fe–Ni designed to extend our understanding of the chemistry of sulfide liquids. Results indicate that adding nickel to Fe-rich sulfide liquids in equilibrium with silicate liquids extends their stability field to much higher oxygen fugacities and lower sulfur fugacities. Increasing Ni/Fe at a given temperature and sulfur and oxygen fugacity is accompanied by a significant decrease in the oxygen content of the sulfide liquid. Results of these experiments are combined with data from the literature to calibrate an associated regular solution model for O–S–Fe–Ni liquids. This model represents a complete refit of the associated regular solution model of Kress (Contrib Mineral Petrol 139:316–325, 2000). The resulting model is combined with the olivine solution model of Hirschmann (Am Mineral 76:1232–1248, 1991) to explore the effect of variations in oxygen and sulfur fugacities on the distribution of Fe and Ni between olivine and sulfide liquid. Predicted olivine–sulfide distribution trends parallel those observed by Gaetani and Grove (Geochim Cosmochim Acta 61:1829–1846, 1997), Gaetani and Grove (Earth Planet Sci Lett 169:147–163, 1999), Brenan and Caciagli (Geochim Cosmochim Acta 64:307–320, 2000) and Brenan (Geochim Cosmochim Acta 67:2663–2681, 2003), but are systematically offset toward lower predicted Ni in the sulfide. Nevertheless our results are consistent with the assertion that low K D os values in magmatic ore deposits such as the J-M Reef reflect high iron contents in the sulfides combined with relatively high oxygen fugacities.
Victor KressEmail:
  相似文献   

7.
Petrographic, SEM, and EPMA analyses are used to study the micro-textures and mineralogical composition of samples collected by a TV-grab from the 26°S SMAR (southern Mid-Atlantic Ridge) hydrothermal field. The investigated samples include the outermost chimney walls and sulfide debris. Isocubanite-chalcopyrite intergrowths are the major Cu-Fe sulfide phase in the chimney wall samples. These intergrowths include normal chalcopyrite, anomalous chalcopyrite (Cu-poor, Zn- and Fe-rich), normal isocubanite with Cu/Fe < 0.50, and Cu-rich isocubanite with Cu/Fe > 0.50. Anomalous chalcopyrite and Cu-rich isocubanite represent the intermediate phases between stoichiometric chalcopyrite and isocubanite in the Cu-Fe-S system. Anomalous chalcopyrite occurs as cores or thin rims bordering isocubanite, which associated with sphalerite. While Cu-rich isocubanite commonly associates pyrite. Based on textural relationships and microanalytical data of both phases, we interpret the abundant anomalous chalcopyrite and Cu-rich isocubanite as metastable or as high-temperature (~300 °C) rapidly precipitated hydrothermal sulfides. This interpretation advocates the SMAR 26°S hydrothermal field as an immature and short-living system.  相似文献   

8.
徐九华  谢玉玲 《岩石学报》2007,23(1):117-124
Mantle xenoliths are common in the Cenozoic basalts of the Changbaishan District,Jilin Province,China.Sulfide assemblages in mantle minerals can be divided into three types:isolated sulfide grains,sulfide-meh inclusions and filling sulfides in fractures.Sulfide-meh inclusions occur as single-phase sulfides,sulfide-silicate melt,and CO_2-sulfide-silicate melt inclusions. Isolated sulfide grains are mainly composed of pyrrhotite,but cubanite was found occasionally.Sulfide-meh inclusions are mainly composed of pontlandite and MSS,with small amounts of chalcopyrite and talnakhite.The calculated distribution coefficient K_(D3)for lherzolite are similar to that of mean experimental value.The bulk sulfides in lherzolite were in equilibrium with the enclosing minerals, indicating immiscible sulfide melts captured in partial melting of upper mantle.Sulfide in fractures has higher Ni/Fe and(Fe Ni)/S than those of sulfide melt inclusions.They might represent later metasomatizing fluids in the mantle.Ni/Fe and(Fe Ni)/S increase from isolated grains,sulfide inclusions to sulfides in fractures.These changes were not only affected by temperature and pressure,hut by geochemistry of Ni,Fe and Cu,and sulfur fugacity as well.  相似文献   

9.
The ～200-km-long intensely deformed Singhbhum Shear Zone (SSZ) in eastern India hosts India’s largest U and Cu deposits and related Fe mineralization. The SSZ separates an Archaean cratonic nucleus to the south from a Mesoproterozoic fold belt in the North and has a complex geologic history that obscures the origin of the contained iron-oxide-rich mineral deposits. This study investigates aspects of the history of mineralization in the SSZ by utilizing new petrographic and electron microprobe observations of pyrite textures and zoning in the Turamdih U–Cu(–Fe) deposit. Mineralization at Turamdih is hosted in intensively deformed quartz–chlorite schist. Sulfides and oxides include, in inferred order of development: (a) magmatic Fe(–Ti–Cr) oxide and Fe–Cu(–Ni) sulfide minerals inferred to be magmatic (?) in origin; followed by (b) uranium, Fe-oxide, and Fe–Cu(–Co) sulfide minerals that predate most or all ductile deformation, and are inferred to be of hydrothermal origin; and (c) Fe–Cu sulfides that were generated during and postdating ductile deformation. These features are associated with the formation of three compositionally and texturally distinct pyrites. Pyrite (type-A), typically in globular–semiglobular composite inclusions of pyrite plus chalcopyrite in magnetite, is characterized by very high Ni content (up to 30,700 ppm) and low Co to Ni ratios (0.01–0.61). The textural and compositional characteristics of associated chalcopyrite and rare pyrrhotite suggest that this pyrite could be linked to the magmatic event via selective replacement of magmatic pyrrhotite. Alternatively, this pyrite and associated sulfide inclusions might be cogenetic with hydrothermal Fe-oxide. Type-B pyrite that forms elongate grains and irregular relics and cores of pyrite with high Co contents (up to 23,630 ppm) and high Co to Ni ratios (7.2–140.9) are interpreted to be related to hydrothermal mineralization predating ductile deformation. A third generation of pyrite (type C) with low Co, low Ni, and moderate Co to Ni ratios (0.19–13.93) formed during and postdating the ductile deformation stage overgrowing, replacing, and surrounding type-B pyrite. The textural evolution of pyrite parallels the tectonometamorphic evolution of the shear zone demonstrating grain elongation during progressive ductile deformation and prograde metamorphism, annealing at the peak metamorphic condition, porphyroblastic growth at the retrograde path and cataclasis following porphyroblastic growth. Compositional characteristics of hydrothermal pyrite and available geological information suggest that the U–Cu(–Fe) deposit at Turamdih might be a variant of the Fe oxide (–Cu–U–rare earth elements) family of deposits.  相似文献   

10.
J. P. Lorand 《Lithos》1989,23(4):281-298
The orogenic-type spinel peridotite massifs of Lherz and Freychinède (Northeastern Pyrenees, Ariège, France) were tectonically emplaced along the North Pyrenean fault. They have been cross-cut by Cretaceous alkali basalts, a few kilometres below the Moho. These magmas crystallized at about 1.0–1.5 GPa as veins of amphibole-rich pyroxenites, containing garnet, and also occasionally as phlogopite hornblendites. In spite of the low volume of trapped silicate liquid, the veins contain up to 1900 ppm S, up to 140 ppm Cu and up to 10 ppb Pd. Under the microscope, the sulfides occur as isolated inclusions within magmatic phases (orthopyroxene, clinopyroxene, amphibole, garnet, spinel, ilmenite), irrespective of parting, cleavage or exsolution planes, or as interstitial grains among the major phases, showing signs of textural equilibration. The sulfide inclusions are interpreted as resulting from entrapment of an immiscible sulfide liquid during magmatic crystallization of the veins. However, a detailed comparison with sulfide inclusions from Cpx- and Al-augite megacrysts entrained in continental basalts shows that post-trapping structural and compositional rearrangements have probaly occurred, in response to cooling, deformation and recrystallization of the veins in the lithospheric mantle.

Except in the thinnest veins where subsolidus re-equilibration of the Ni partitioning has occurred between the veins and their host peridotites, the sulfide inclusions are predominantly composed of slightly nickeliferous pyrrhotite, coexisting with subordinate amounts of pentlandite and chalcopyrite. Bulk chemistry recomputed from modal proportions and microprobe analyses of each individual sulfide in 500 inclusions is as follows: 54% Fe, 5.5% Ni, 2.0% Cu and 38.0% S. A calculation combining this composition and the experimentally determined distribution coefficients for Ni and Cu between sulfide melt and silicate melt leads to < 200 ppm Ni and > 85 ppm Cu in the silicate melt at the time at which the sulfide liquid became immiscible. It is concluded that the alkalic basaltic magma parent to the amphibole-rich veins reached sulfide saturation at depth of 30–40 km, i.e. after some differentiation occurred in the uppermost lithospheric mantle.  相似文献   


11.
Petrological, geochemical, and Nd isotopic analyses have been carried out on rock samples from the Rainbow vent field to assess the evolution of the hydrothermal system. The Rainbow vent field is an ultramafic-hosted hydrothermal system located on the Mid-Atlantic Ridge characterized by vigorous high-temperature venting (∼365°C) and unique chemical composition of fluids: high chlorinity, low pH and very high Fe, and rare earth element (REE) contents (Douville et al., Chemical Geology 184:37–48, 2002). Serpentinization has occurred under a low-temperature (<270°C) retrograde regime, later overprinted by a higher temperature sulfide mineralization event. Retrograde serpentinization reactions alone cannot reproduce the reported heat and specific chemical features of Rainbow hydrothermal fluids. The following units were identified within the deposit: (1) nonmineralized serpentinite, (2) mineralized serpentinite—stockwork, (3) steatite, (4) semimassive sulfides, and (5) massive sulfides, which include Cu-rich massive sulfides (up to 28wt% Cu) and Zn-rich massive sulfide chimneys (up to 5wt% Zn). Sulfide mineralization has produced significant changes in the sulfide-bearing rocks including enrichment in transition metals (Cu, Zn, Fe, and Co) and light REE, increase in the Co/Ni ratios comparable to those of mafic Cu-rich volcanic-hosted massive sulfide deposits and different 143Nd/144Nd isotope ratios. Vent fluid chemistry data are indicative of acidic, reducing, and high temperature conditions at the subseafloor reaction zone where fluids undergo phase separation most likely under subcritical conditions (boiling). An explanation for the high chlorinity is not straightforward unless mixing with high salinity brine or direct contribution from a magmatic Cl-rich aqueous fluid is considered. This study adds new data, which, combined with the current knowledge of the Rainbow vent field, brings compelling evidence for the presence, at depth, of a magmatic body, most likely gabbroic, which provides heat and metals to the system. Co/Ni ratios proved to be good tools used to discriminate between rock units, degree of sulfide mineralization, and positioning within the hydrothermal system. Deeper units have Co/Ni <1 and subsurface and surface units have Co/Ni >1.  相似文献   

12.
Nickeliferous sulfides in xenoliths,olivine megacrysts and basaltic glass   总被引：2，自引：0，他引：2  
The composition of olivine and nickeliferous sulfide inclusions from a selection of mafic and ultramafre rocks, xenoliths and megacrysts, including picritic basalts from Kilauea Volcano, Hawaii, kimberlite from Fayette County, Pennsylvania, and megacrysts from Mount Shasta, California are compared with the mean experimental value of the distribution coefficient for Ni/Fe exchange (KD3=32). Only nine of the forty five olivipe/bulk-sulfide pairs investigated have compositions consistent with equilibration at high temperature, yielding calculated KD3 values in the range 22 to 41. The remaining pairs have calculated KD3 values which range from 0 to 19. Bulk-sulfides in disequilibrated assem-blages are consistently depleted in nickel and within both indivudual associations and individual petrographic sections they exhibit a wide variation in NiS content. The bulk copper contents of olivine-and groundmass-hosted sulfides from Kilauea Volcano range from 0.5 to 43 at%, and samples from the Kilauea Iki lava lake are more Fe-and Cu-rich and generally have lower KD3 values than those from the eruption itself. As with magmatic Ni–Cu sulfide deposits, most nickeliferous sulfide inclusions in mantle-related rocks and xenoliths and in volcanic rocks do not have pristine early-magmatic bulk compositions, and it would seem to be premature to attribute these sulfides solely to either a mantle or an early-magnatic origin.  相似文献   

13.
捕虏体麻粒岩是了解下地壳形成和演化的重要样品。汉诺坝新生代玄武岩中的二辉麻粒岩捕虏体样品中富含各种硫化物相,主要类型有:①孤立产出的球状出溶硫化物;②矿物颗粒之间或颗粒内的粗晶硫化物;③次生硫化物包裹体群;④裂隙充填硫化物。电子探针分析表明,硫化物的矿物成分均为贫镍磁黄铁矿,(Ni+Co+Cu)/Fe(原子比)远小于0.2;(Fe+Cu+Co+Ni)/S(原子比)比地幔岩的磁黄铁矿小,多小于0.875,反映了一种S过饱和环境。各种产状的磁黄铁矿中Au、Ag都有一定的含量,其平均值分别为0.19%～0.22%(Au)、0.01%～0.02%(Ag),反映下地壳的麻粒岩化与金矿化的成因联系。磁黄铁矿的Ni、Co、Cu含量与S正相关,说明微量重金属元素与S具有同源的关系,由于地幔去气伴随S而进入下地壳。  相似文献   

14.
The Prominent Hill deposit is a world-class iron oxide copper–gold (IOCG) deposit in South Australia, characterized by a high Cu/S ratio of the dominant Cu-(Fe) sulfides hosted by hematite breccias. It contains a total resource of 278 Mt of ore at 0.98% Cu and 0.75 g/t Au. Prominent Hill is one of several IOCG deposits and numerous prospects in the Olympic IOCG province that are temporally associated with the 1603–1575 Ma Gawler Range Volcanics, a large igneous province including co-magmatic granitoid intrusions of the Hiltaba Suite. Globally, IOCG deposits share many similar features in terms of their geological environment and mineral association. However, it is not yet clear whether sulfur and copper originate from the same source rocks and which hydrothermal redox processes created the characteristic iron oxide enrichment. Highly variable sulfur isotope compositions of sulfides and sulfates in IOCG deposits have previously been interpreted in terms of diverse sulfur sources that may include contributions from magmatic, sedimentary, seawater or evaporitic sulfur. In order to test these alternatives, we performed a detailed sulfur isotope study of Cu-(Fe) sulfides from Prominent Hill and IOCG prospects nearby. The Prominent Hill deposit shows a wide range in δ34SV-CDT between − 33.5‰ and 29.9‰ for Cu-(Fe) sulfides, and a narrower range of 4.3‰ to 15.8‰ for barite. Iron sulfides (pyrite, pyrrhotite) show a narrow range in sulfur isotope composition, whereas Cu-bearing sulfides show a much wider range, and more negative δ34SV-CDT values on average. We propose a two-stage sulfide mineralization model for the IOCG system in the Prominent Hill area, in which all hydrothermal sulfur is ultimately derived from a magmatic source that had a composition of 4.4 ± 2‰. The diversity in sulfur isotope composition can be produced by different fluid evolution pathways along reducing or oxidizing trajectories. A reduced sulfur evolution pathway is responsible for stage I mineralization, when intrusion-derived magmatic-hydrothermal fluids produced early pyrite and minor chalcopyrite at Prominent Hill, and iron ± copper sulfides in regional magnetite skarns and in some pervasively altered volcanic rocks of the Gawler Range Volcanics. Shallow-venting magmatic-hydrothermal fluids and subaerial volcanic gases that became completely oxidized by reaction with atmospheric oxygen produced sulfate and sulfuric acid with a sulfur isotope composition equal to their magmatic source. This highly oxidized ore fluid probably consisted dominantly of water from the hydrosphere, but contained magmatic solute components, notably sulfate, acidity and Cu. Sulfate reduction produced hydrothermal Cu sulfides with a wide range in sulfur isotope compositions from very negative to moderately positive values. Partial reaction of the Cu-rich stage II fluid with earlier stage I sulfides resulted in mixing of sulfur derived from sulfate reduction and from sulfides deposited during stage I. Modeling of the sulfur isotope fractionation processes in response to reducing and oxidizing pathways demonstrates that the entire spectrum of sulfur isotope data from stage I and stage II mineralization can be explained with a single, ultimately magmatic sulfur source. Such a magmatic sulfur source is also adequate to explain the complete spectrum of sulfur isotope data of other IOCG prospects and deposits in the Olympic province, including Olympic Dam. The results of our study challenge the conventional model that suggests the requirement of multiple and compositionally diverse sulfur sources in hematite-breccia hosted IOCG style mineralization.  相似文献   

15.
The Wengeqi complex in Guyang County, Inner Mongolia, is one of several Pd–Pt-mineralized Paleozoic mafic–ultramafic complexes along the north-central margin of the North China. The complex comprises pyroxenites, biotite pyroxenites, amphibole pyroxenites, gabbros, and amphibolites. Zircons extracted from a pyroxenite yield a U–Pb SHRIMP age of 399?±?4?Ma. Several 2–6-m wide syngenetic websterite dikes contain 1–3?ppm Pd?+?Pd and are dominated by pyrite–chalcopyrite–pyrrhotite–magnetite–(pentlandite) assemblages with minor sperrylite, sudburyite, and kotuskite. Textural relationships indicate that pyrite has replaced magmatic chalcopyrite and that magnetite has replaced magmatic pyrrhotite. The mineralization is enriched in Pd–Pt–Cu > Au >> Rh–Ir–Os–Ni > Ru, similar to other occurrences of hydrothermally modified magmatic mineralization, but very different from the much less fractionated compositions of magmatic PGE mineralization. Textural, mineralogical, and geochemical relationships are consistent with alteration of an original magmatic Fe–Ni–Cu sulfide assemblage by a S-rich oxidizing high-temperature (deuteric) hydrothermal fluid.  相似文献   

16.
Zusammenfassung Ausgeprägte Wechselbeziehungen existieren zwischen zahlreichen Erzen und den sie umhüllenden Gesteinen. Zum Beispiel sind sulfidische Eisen-Nickel-Kupfeterze fast ausschließlich an basische Gesteine gebunden, wie Norite, während Molybdänsulfidlagerstätten, oder auch Blei-Zink-Vererzungen, in sauren Gesteinen, etwa Graniten und Monzoniten, anzutreffen sind. Experimentelle Untersuchungen an entsprechenden silikatisch-sulfidischen Stoff-systemen zeigen in augenfälliger Weise eine weitgehende Unmischbarkeit im Schmelzfluß. Die Löslichkeit von Sulfiden in Silikatschmelzen ist gering selbst bei niedriger Sauerstoffugazität und nimmt mit steigender f02 noch weiter ab. Zufuhr von Schwefel zu einer homogenen Schmelze noritischer Zusammensetzung, mit kleinen Nickel- und Kupfergehalten, führt zur Bildung einer sulfidisch-oxidischen Schmelze, die mit der Silikatschmelze koexistiert. Die Silikatschmelze puffert die Zusammensetzung der sulfidisch-oxidischen Schmelze, welche bei der Abkühlung zu einem Gemisch aus Magnetit und monosulfidischen Mischkristallen, (Fe, Ni, Cu) 1–x S, kristallisiert. Bei weiterer Temperaturerniedrigung zerfällt die Mischkristallphase zu Pyrrhotin, Kupferkies und Pentlandit, gemäß der charakteristischen Erzparagenese vom Typus Sudbury. Bereiche von miteinander unmischbaren Schmelzen existieren auch in Systemen, welche granitische oder monzonitische und auch sulfidische Komponenten beinhalten. Reaktionen zwischen Schwefeldampf und silikatischen Mineralien führen zur Bildung von Sulfiden und Oxiden, welche gewöhnlich in metamorphen Gesteinen zu beobachten sind.
Pronounced correlations exist between many ores and the rock types in which they occur. For instance, iron-nickel-copper sulfide ores are almost exclusively located in mafic rocks, such as norites and molybdenum sulfide deposits and vein-type lead-zinc sulfide deposits occur in silicic rocks, such as granites and monzonites. Experimental investigations of pertinent systems containing sulfide as well as silicate components have demonstrated the presence of wide fields of liquid immiscibility. The solubilities of sulfides in liquid silicates are low (<1000 ppm) even at low oxygen fugacities and diminish further with increase in f02. Addition of sulfur to homogeneous noritic-type liquid which contains small amounts of nickel and copper produces a sulfide-oxide liquid which coexists with the silicate liquid. The silicate liquid buffers the composition of the sulfide-oxide liquid. The latter crystallizes on cooling to a mixture of magnetite and a (Fe, Ni, Cu)1–x S solid solution wich in turn decomposes to the pyrrhotite, chalcopyrite, pentlandite assemblages characteristic of Sudbury-type deposits. Liquid immiscibility fields containing coexisting silicate and sulfide-oxide liquids exist also in systems containing granitic or monzonitic as well as the sulfide components. Reactions between sulfur vapor and silicate minerals produce sulfides and oxides commonly observed in metamorphosed rocks.
  相似文献   

17.
Concentrations of platinum group elements (PGE), Ag, As, Au, Bi, Cd, Co, Mo, Pb, Re, Sb, Se, Sn, Te, and Zn, have been determined in base metal sulfide (BMS) minerals from the western branch (402 Trough orebodies) of the Creighton Ni–Cu–PGE sulfide deposit, Sudbury, Canada. The sulfide assemblage is dominated by pyrrhotite, with minor pentlandite, chalcopyrite, and pyrite, and they represent monosulfide solid solution (MSS) cumulates. The aim of this study was to establish the distribution of the PGE among the BMS and platinum group minerals (PGM) in order to understand better the petrogenesis of the deposit. Mass balance calculations show that the BMS host all of the Co and Se, a significant proportion (40–90%) of Os, Pd, Ru, Cd, Sn, and Zn, but very little (<35%) of the Ag, Au, Bi, Ir, Mo, Pb, Pt, Rh, Re, Sb, and Te. Osmium and Ru are concentrated in equal proportions in pyrrhotite, pentlandite, and pyrite. Cobalt and Pd (∼1 ppm) are concentrated in pentlandite. Silver, Cd, Sn, Zn, and in rare cases Au and Te, are concentrated in chalcopyrite. Selenium is present in equal proportions in all three BMS. Iridium, Rh, and Pt are present in euhedrally zoned PGE sulfarsenides, which comprise irarsite (IrAsS), hollingworthite (RhAsS), PGE-Ni-rich cobaltite (CoAsS), and subordinate sperrylite (PtAs2), all of which are hosted predominantly in pyrrhotite and pentlandite. Silver, Au, Bi, Mo, Pb, Re, Sb, and Te are found predominantly in discrete accessory minerals such as electrum (Au–Ag alloy), hessite (Ag2Te), michenerite (PdBiTe), and rhenium sulfides. The enrichment of Os, Ru, Ni, and Co in pyrrhotite, pentlandite, and pyrite and Ag, Au, Cd, Sn, Te, and Zn in chalcopyrite can be explained by fractional crystallization of MSS from a sulfide liquid followed by exsolution of the sulfides. The early crystallization of the PGE sulfarsenides from the sulfide melt depleted the MSS in Ir and Rh. The bulk of Pd in pentlandite cannot be explained by sulfide fractionation alone because Pd should have partitioned into the residual Cu-rich liquid and be in chalcopyrite or in PGM around chalcopyrite. The variation of Pd among different pentlandite textures provides evidence that Pd diffuses into pentlandite during its exsolution from MSS. The source of Pd was from the small quantity of Pd that partitioned originally into the MSS and a larger quantity of Pd in the nearby Cu-rich portion (intermediate solid solution and/or Pd-bearing PGM). The source of Pd became depleted during the diffusion process, thus later-forming pentlandite (rims of coarse-granular, veinlets, and exsolution flames) contains less Pd than early-forming pentlandite (cores of coarse-granular).  相似文献   

18.
We have performed six experiments in which we equilibrated monosulfide solid solution (mss) with sulfide melt in evacuated silica capsules containing solid buffers to fix oxygen and sulfur fugacity, at temperatures of 950°C, 1000°C and 1050°C at bulk concentrations of ∼50 ppm for each of the PGE and Au, 5% Ni, and 7% Cu. Concentrations of O, S, Fe, Ni and Cu were determined by electron microprobe, whereas precious metal concentrations were determined by laser-ablation inductively-coupled mass spectrometry. Partition coefficients of all elements studied show minimal dependences on oxygen fugacity from the IW to the QFM buffers when sulfur fugacity is fixed at the Pt-PtS buffer. Cu, Pt, Pd and Au are strongly incompatible and Ru remains moderately to strongly compatible under all conditions studied. At all oxygen fugacities, at the Pt-PtS sulfur buffer, Ir and Rh remain highly compatible in mss. In the single run at both low oxygen and low sulfur fugacity Ir and Rh were found to be strongly incompatible in mss. At QFM and Pt-PtS the partition coefficient for Ni shows weak temperature dependence, ranging from 0.66 at 1050°C to 0.94 at 950°C. At lower oxygen and sulfur fugacity Ni showed much more incompatible behavior. Comparison with the compositions of sulfide ores from the Lindsley deposit of Sudbury suggests that the sulfide magma evolved under conditions close to the QFM and Pt-PtS buffers. The compatible behavior observed for Ni, Ir and Rh at Lindsley and most other magmatic sulfide deposits hosted by mafic rocks requires equilibration of mss and sulfide liquid at moderately high sulfur fugacity and low temperatures near to the solidus of the sulfide magma. We argue that this constraint requires that the sulfide magma must have evolved by equilibrium crystallization, rather than fractional segregation of mss as is commonly supposed.  相似文献   

19.
The Eagle Ni–Cu–(PGE) deposit is hosted in mafic–ultramafic intrusive rocks associated with the Marquette–Baraga dike swarm in northern Michigan. Sulfide mineralization formed in association with picritic magmatism in a dynamic magma conduit during the early stages in the development of the ~1.1?Ga Midcontinent Rift System. Four main types of sulfide mineralization have been recognized within the Eagle deposit: (1) disseminated sulfides in olivine-rich rocks; (2) rocks with semi-massive sulfides located both above and below the massive sulfide zone; (3) massive sulfides; and (4) sulfide veins in sedimentary country rocks. The disseminated, massive and lower semi-massive sulfide zones are typically composed of pyrrhotite, pentlandite and chalcopyrite, whereas the upper semi-massive sulfide ore zone also contains pyrrhotite, pentlandite, and chalcopyrite, but has higher cubanite content. Three distinct types of sulfide mineralization are present in the massive sulfide zone: IPGE-rich, PPGE-rich, and PGE-unfractioned. The lower and upper semi-massive sulfide zones have different PGE compositions. Samples from the lower semi-massive sulfide zone are characterized by unfractionated PGE patterns, whereas those from the upper semi-massive sulfide zone show moderate depletion in IPGE and moderate enrichment in PPGE. The mantle-normalized PGE patterns of unfractionated massive and lower semi-massive sulfides are subparallel to those of the disseminated sulfides. The results of numerical modeling using PGE concentrations recalculated to 100% sulfide (i.e., PGE tenors) and partition coefficients of PGE between sulfide liquid and magma indicate that the disseminated and unfractionated massive sulfide mineralization formed by the accumulation of primary sulfide liquids with similar R factors between 200 and 300. In contrast, the modeled R factor for the lower semi-massive sulfide zone is <100. The fractionated sulfide zones such as those of the IPGE-rich and PPGE-rich massive sulfides and the upper semi-massive sulfide zone can be explained by fractional crystallization of monosulfide solid solution from sulfide liquids. The results of numerical modeling indicate that the sulfide minerals in the upper semi-massive sulfide zone are the products of crystallization of fractionated sulfide liquids derived from a primary sulfide liquid with an R factor similar to that for the disseminated sulfide mineralization. Interestingly, the modeled parental sulfide liquid for the IPGE-rich and PPGE-rich massive sulfide zones has a higher R factor (~400) than that for the unfractionated massive sulfide mineralization. Except one sample which has unusually high IPGE and PPGE contents, all other samples from the Cu-rich sulfide veins in the footwall of the intrusion are highly depleted in IPGE and enriched in PPGE. These signatures are generally consistent with highly fractionated sulfide liquids expelled from crystallizing sulfide liquid. Collectively, our data suggest that at least four primary sulfide liquids with different R factors (<100, 200–300, ~400) were involved in the formation of the Eagle magmatic sulfide deposit. We envision that the immiscible sulfide liquids were transported from depth by multiple pulses of magma passing through the Eagle conduit system. The sulfide liquids were deposited in the widened part of the conduit system due to the decreasing velocity of magma flow. The presence of abundant olivine in some of the sulfide ore zones indicates that the ascending magma also carried olivine crystals. Sulfide saturation was attained in the parental magma due in large part to the assimilation of country rock sulfur at depth.  相似文献   

20.
The Kabanga deposit constitutes one of the most significant Ni sulfide discoveries of the last two decades (indicated mineral resource 23 Mt of ore at 2.64% Ni, inferred resource 28.5 Mt at 2.7% Ni, November 2008). The sulfides are hosted by predominantly harzburgitic and orthopyroxenitic intrusions that crystallized from magnesian basaltic and picritic magmas. However, compared with other sulfide ores that segregated from such magmas (e.g., Jinchuan, Pechenga, Raglan), most Kabanga sulfides have low Ni (<1–3%), Cu (∼0.1–0.4%), and PGE contents (≪1 ppm), high Ni/Cu (5–15), and low Ni/Co (10–15) and Pd/Ir (2–20). Sulfides with higher metal contents (up to ∼5% Ni, 0.8% Cu, 10 ppm PGE) are found in only one unit from Kabanga North. The observed metal contents are consistent with segregation of magmatic sulfides from fertile to strongly metal-depleted magmas, at intermediate to very low mass ratios of silicate to sulfide liquid (R factors) of approximately 10–400. Sulfide saturation was triggered prior to final emplacement, by assimilation of up to 50% of the total sulfur in the intrusions from sulfide-bearing metasedimentary country rocks. Immiscible sulfide liquid was entrained by the magma and ultimately precipitated in dynamic magma conduits that formed tubular and sill-like mafic–ultramafic bodies characterized by abundant magmatic breccias, highly irregular layering, and frequent compositional reversals. The unusually large degree of crustal contamination and the low R factors render Kabanga an end-member in the spectrum of magmatic Ni sulfide ores.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号