共查询到20条相似文献，搜索用时 31 毫秒
1.
In this paper, a numerical model is developed for the fully coupled hydro‐mechanical analysis of deformable, progressively fracturing porous media interacting with the flow of two immiscible, compressible wetting and non‐wetting pore fluids, in which the coupling between various processes is taken into account. The governing equations involving the coupled solid skeleton deformation and two‐phase fluid flow in partially saturated porous media including cohesive cracks are derived within the framework of the generalized Biot theory. The fluid flow within the crack is simulated using the Darcy law in which the permeability variation with porosity because of the cracking of the solid skeleton is accounted. The cohesive crack model is integrated into the numerical modeling by means of which the nonlinear fracture processes occurring along the fracture process zone are simulated. The solid phase displacement, the wetting phase pressure and the capillary pressure are taken as the primary variables of the three‐phase formulation. The other variables are incorporated into the model via the experimentally determined functions, which specify the relationship between the hydraulic properties of the fracturing porous medium, that is saturation, permeability and capillary pressure. The spatial discretization is implemented by employing the extended finite element method, and the time domain discretization is performed using the generalized Newmark scheme to derive the final system of fully coupled nonlinear equations of the hydro‐mechanical problem. It is illustrated that by allowing for the interaction between various processes, that is the solid skeleton deformation, the wetting and the non‐wetting pore fluid flow and the cohesive crack propagation, the effect of the presence of the geomechanical discontinuity can be completely captured. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
2.
In this paper, a fully coupled thermo-hydro-mechanical model is presented for two-phase fluid flow and heat transfer in fractured/fracturing porous media using the extended finite element method. In the fractured porous medium, the traction, heat, and mass transfer between the fracture space and the surrounding media are coupled. The wetting and nonwetting fluid phases are water and gas, which are assumed to be immiscible, and no phase-change is considered. The system of coupled equations consists of the linear momentum balance of solid phase, wetting and nonwetting fluid continuities, and thermal energy conservation. The main variables used to solve the system of equations are solid phase displacement, wetting fluid pressure, capillary pressure, and temperature. The fracture is assumed to impose the strong discontinuity in the displacement field and weak discontinuities in the fluid pressure, capillary pressure, and temperature fields. The mode I fracture propagation is employed using a cohesive fracture model. Finally, several numerical examples are solved to illustrate the capability of the proposed computational algorithm. It is shown that the effect of thermal expansion on the effective stress can influence the rate of fracture propagation and the injection pressure in hydraulic fracturing process. Moreover, the effect of thermal loading is investigated properly on fracture opening and fluids flow in unsaturated porous media, and the convective heat transfer within the fracture is captured successfully. It is shown how the proposed computational model is capable of modeling the fully coupled thermal fracture propagation in unsaturated porous media. 相似文献
3.
储层流固耦合的数学模型和非线性有限元方程 总被引：2，自引：0，他引：2
根据饱和多孔介质固体骨架的平衡方程和多孔介质中流体的连续性方程,建立了储层流固耦合数学模型。模型中引入了Jaumann应力速率公式描述多孔介质固体骨架的大变形效应,并考虑了地应力、初始孔隙压力、初始流体密度和初始孔隙度对耦合模型的影响。基于与微分方程等价的加权余量公式,在空间域采用有限元离散,对时间域进行隐式差分格式离散,导出了以单元节点位移和单元节点孔隙压力为未知量的储层流固耦合的非线性有限元增量方程。该模型在石油工程中有广泛的应用,为储层流固耦合的数值模拟奠定了理论基础。 相似文献
4.
多孔介质中的流动问题,与孔隙介质的特性,含水量状态以及含水量的变化历史密切相关。基于毛细循环滞回理论模型,考虑含水量变化历史对土水特征关系的影响,在开发的U-DYSAC2有限元程序中进行了相应的数值实施。在试验给定的初边值条件下进行了非饱和渗流模拟分析,并将模拟结果与实测数据比较,表明在压力边界条件反复变化下,考虑滞回效应能获得更接近实测的结果,证实该模型在模拟各种循环变化条件下非饱和土渗流初边值问题的适用性与必要性。对入渗重分布反复变化条件下非饱和土柱流动的数值模拟表明,考虑滞回与不考虑滞回条件下,含水量、孔隙水压力和湿峰的迁移的预测在入渗后的重分布过程差异较大。考虑滞回效应时,土柱上部的脱湿速率、下部的吸湿速率比不考虑滞回时要低。从而证实了非饱和多孔介质中的土水状态依赖于含水量变化,而且强烈依赖于土体的水力路径变化。因此,循环边界条件变化下,毛细滞回效应在非饱和渗流模拟中的影响显著,必须加以考虑。 相似文献
5.
Nadia Laredj Hanifi Missoum Karim Bendani Mustapha Maliki 《Arabian Journal of Geosciences》2011,5(5):935-942
Knowledge of transport processes of heat and moisture in soils of arid zones is vital to understanding the environmental and economic impacts of many activities: agriculture, waste disposal, geoenvironmental practices and earth sciences. Through extensive review and study on the different aspects of coupled transfer processes in swelling porous media, a general mathematical model for coupled heat, moisture, air flow and deformation problems in clayey soils is proposed in a consistent and unified manner. The model is characterized by the presence of a deformable solid matrix filled with two fluid phases (liquid water and air). In the proposed model, both pore water and air transfers are assumed to be governed by the generalized Darcy’s law. Fully coupled, non-linear partial differential equations are established and then solved by using a Galerkin weighted residual approach in space domain and an implicit integrating scheme in time domain. The obtained model has been finally validated by means of some case tests for the prediction of the thermo-hydro-mechanical behaviour of unsaturated swelling soils. The calculated relative errors between experimental and numerical results are 3% for temperature and 7% for stresses. Consequently, the developed numerical model predicts satisfactory results, compared to experimental test measures. The model is applicable to two-dimensional problems with various initial and boundary conditions; non-linear soil parameters can be easily included in this model. 相似文献
6.
库水位下降时的岸坡非稳定渗流问题研究 总被引：5，自引：1，他引：4
水位下降时岸坡的渗流是涉及土体由饱和向非饱和状态过渡的水-气二相流过程,目前相关研究成果大都假设孔隙气压力为0,忽略孔隙气的影响。根据水、空气的质量守恒定律和达西定律,结合多相流理论建立水-气二相流模型,采用高效的积分有限差分法求解,通过变换主要变量,实现饱和（单相）与非饱和（二相）的相互转变,并给出各种边界条件下合理的数学处理方法。通过Muskat渗流问题,验证了上述模型的正确性;并对某土质岸坡水位下降时的非稳定渗流问题进行分析,结果表明,岸坡的基质吸力小于浸润线以上的负孔隙水压力,在浸润线以上的很大区域为毛细管水饱和带,其土体饱和且基质吸力为0,这对边坡稳定十分不利,精确分析水位下降的边坡稳定问题时,孔隙气压力变化的影响值得研究。 相似文献
7.
Air sparging (AS) is an in situ soil/groundwater remediation technology, which involves the injection of pressurized air/oxygen through an air sparging well below the zone of contamination. Characterizing the mechanisms governing movement of air through saturated porous media is critical for the design of an effective cleanup treatment system. In this research, micromechanical investigation was performed to understand the physics of air migration and subsequent spatial distribution of air at pore scale during air sparging. The void space in the porous medium was first characterized by pore network consisting of connected pore bodies and bonds. The biconical abscissa asymmetric concentric bond was used to describe the connection between two adjacent pore bodies. Then a rule‐based dynamic two‐phase flow model was developed and applied to the pore network model. A forward integration of time was performed using the Euler scheme. For each time step, the effective viscosity of the fluid was calculated based on fractions of two phases in each bond, and capillary pressures across the menisci was considered to compute the pressure field. The developed dynamic model was used to study the rate‐dependent drainage during air sparging. The effect of the capillary number and geometrical properties of the network on the dynamic flow properties of two‐phase flow including residual saturation, spatial distribution of air and water, dynamic phase transitions, and relative permeability‐capillary pressure curves were systematically investigated. Results showed that all the above information for describing the air water two‐phase flow are not intrinsic properties of the porous medium but are affected by the two‐phase flow dynamics and spatial distribution of each phase, providing new insight to air sparging. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
8.
有效应力参数的合理确定是非饱和土有效应力研究的重要内容。然而,现有的有效应力参数未能较好地考虑孔隙水的微观赋存形态对有效应力的影响。为此,分析了孔隙水的微观赋存形态,明确了孔隙水可分为收缩膜、吸附水和毛细水,建立了非饱和粉土的扩展三相孔隙介质模型,即孔隙气、毛细水和广义土骨架。基于该模型,采用分相平衡分析法,推导了非饱... 相似文献
9.
在Wheeler本构模型框架的基础上,提出了一个水力与力学耦合的本构模型。该模型中的土-水特征曲线采用毛细滞回内变量模型,能够更好地描述水力历史变化下毛细滞回现象对非饱和多孔介质变形的影响,同时也可描述非饱和多孔介质变形对渗流的影响。非饱和土的强度不仅与吸力有关,而且受到饱和度的影响。相同的吸力下,土样经过吸湿和脱湿路径的饱和度不同,因此,非饱和土的强度也不同。此模型以体积含水率的塑性变化和体变的塑性变化为硬化参数,不仅能描述基质吸力对非饱和土的强化作用,而且考虑了饱和度对强度及变形的影响。试验结果与模型预测基本吻合,证明该模型能够模拟非饱和土的主要特性。为了简化,此模型是在各向同性荷载下推得的,有待于推广到一般的应力状态 相似文献
10.
This paper presents a fully coupled finite element formulation for partially saturated soil as a triphasic porous material, which has been developed for the simulation of shield tunnelling with heading face support using compressed air. While for many numerical simulations in geotechnics use of a two‐phase soil model is sufficient, the simulation of compressed air support demands the use of a three‐phase model with the consideration of air as a separate phase. A multiphase model for soft soils is developed, in which the individual constituents of the soil—the soil skeleton, the fluid and the gaseous phase—and their interactions are considered. The triphasic model is formulated within the framework of the theory of porous media, based upon balance equations and constitutive relations for the soil constituents and their mixture. An elasto‐plastic, cam–clay type model is extended to partially saturated soil conditions by incorporating capillary pressure according to the Barcelona basic model. The hydraulic properties of the soil are described via DARCY 's law and the soil–water characteristic curve after VAN GENUCHTEN . Water is modelled as an incompressible and air as a compressible phase. The model is validated by means of selected benchmark problems. The applicability of the model to geotechnical problems is demonstrated by results from the simulation of a compressed air intervention in shield tunnelling. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
11.
通过建立二维物理模型,研究非饱和层状非均质多孔介质中轻非水相液体LNAPLs(Light Non-a-queous Phase Liquids)的入渗机制与变化特征,建立LNAPLs运移与分布的锋面扩展模型,探讨入渗阶段油流锋面扩展速率的变化规律。结果发现:模型中砂土的渗透系数、孔隙度及油的相对渗透系数对LNAPLs运移的锋面扩展速率影响较大,而油的饱和度与压头变化对其影响较小。当LNAPLs由中砂进入细砂与细砂倾斜透镜体时,砂的渗透系数、孔隙度及油的相对渗透系数减小,这种介质结构面的突变改变了LNAPLs锋面扩展速率,其在中砂中锋面扩展速率快而在细砂与细砂倾斜透镜体中锋面扩展速率慢。此外,当LNAPLs进入干湿界面后,由于毛细作用的增强与含水量的加大,其横向比垂向运移的平均锋面扩展速率大。 相似文献
12.
Unsaturated soils are three‐phase porous media consisting of a solid skeleton, pore liquid, and pore gas. The coupled mathematical equations representing the dynamics of unsaturated soils can be derived based on the theory of mixtures. Solution of these fully coupled governing equations for unsaturated soils requires tremendous computational resources because three individual phases and interactions between them have to be taken into account. The fully coupled equations governing the dynamics of unsaturated soils are first presented and then two finite element formulations of the governing equations are presented and implemented within a finite element framework. The finite element implementation of all the terms in the governing equations results in the complete formulation and is solved for the first time in this paper. A computationally efficient reduced formulation is obtained by neglecting the relative accelerations and velocities of liquid and gas in the governing equations to investigate the effects of fluid flow in the overall behavior. These two formulations are used to simulate the behavior of an unsaturated silty soil embankment subjected to base shaking and compared with the results from another commonly used partially reduced formulation that neglects the relative accelerations, but takes into account the relative velocities. The stress–strain response of the solid skeleton is modeled as both elastic and elastoplastic in all three analyses. In the elastic analyses no permanent deformations are predicted and the displacements of the partially reduced formulation are in between those of the reduced and complete formulations. The frequency of vibration of the complete formulation in the elastic analysis is closer to the predominant frequency of the base motion and smaller than the frequencies of vibration of the other two analyses. Proper consideration of damping due to fluid flows in the complete formulation is the likely reason for this difference. Permanent deformations are predicted by all three formulations for the elastoplastic analyses. The complete formulation, however, predicts reductions in pore fluid pressures following strong shaking resulting in somewhat smaller displacements than the reduced formulation. The results from complete and reduced formulations are otherwise comparable for elastoplastic analyses. For the elastoplastic analysis, the partially reduced formulation leads to stiffer response than the other two formulations. The likely reason for this stiffer response in the elastoplastic analysis is the interpolation scheme (linear displacement and linear pore fluid pressures) used in the finite element implementation of the partially reduced formulation. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
13.
考虑气相影响的降雨入渗过程分析研究 总被引：4，自引：1，他引：3
降雨入渗过程是水在下渗的过程中驱替空气的水-气二相流过程,对这一过程的精确模拟一直是渗流计算的难点,目前的处理方法通常是忽略孔隙气压力变化的影响。根据多相流理论,结合质量守恒定律和达西定律,建立了水-气二相流模型,模型的求解采用积分有限差分法和Newton-Raphson迭代方法,通过变换主要变量来表达相态的变化,实现了水相、气相边界条件及降雨入渗边界的精确模拟。利用上述模型对一土柱试验进行模拟,从而验证了模型的正确性,研究了一均质土层的降雨入渗过程,得到了孔隙水压力、孔隙气压力和毛细压力及含水率的变化过程。根据入渗率与地表孔隙气压力的变化关系,验证了孔隙气压力的增大对入渗水流产生阻滞作用。在求解非稳定渗流问题中,考虑空气压力变化的影响是值得研究的。 相似文献
14.
One‐dimensional dynamics of saturated incompressible porous media: analytical solutions and influence of inertia terms 
下载免费PDF全文
下载免费PDF全文 The complexity of formulations for the hydromechanical coupled mechanics of porous media is typically minimised by simplifying assumptions such as neglecting the effect of inertia terms. For example, three formulations commonly employed to model practical problems are classified as fully dynamic, simplified dynamic and quasi‐static. Thus, depending on the porous media conditions, each formulation will have advantages and limitations. This paper presents a comprehensive analysis of these limitations when solving one‐dimensional fully saturated porous media problems in addition to a new solution that considers a more general loading situation. A phase diagram is developed to assist on the selection of which formulation is more appropriate and convenient regarding particular cases of porosity and hydraulic conductivity values. Non‐dimensional formulations are proposed to achieve this goal. Results using the analytical solutions are compared against numerical values obtained with the finite element method, and the effect of porosity is investigated. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
15.
Extreme waves caused by tsunamis and storm surges can lead to soil failures in the near‐shore region, which may have severe impact on coastal environments and communities. Multiphase flows in deformable porous media involve several coupled processes and multiple time scales, which are challenging for numerical simulations. The objective of this study is to investigate the roles of the various processes and their interactions in multiphase flows in unsaturated soils under external wave loading, via theoretical time‐scale analysis and numerical simulations. A coupled geomechanics–multiphase flow model based on conservation laws is used. Theoretical analysis based on coupled and decoupled models demonstrates that transient and steady‐state responses are governed by pore pressure diffusion and saturation front propagation, respectively, and that the two processes are essentially decoupled. Numerical simulations suggest that the compressibility of the pore fluids and the deformation of the soil skeleton are important when the transient responses of the media are of concern, while the steady‐state responses are not sensitive to these factors. The responses obtained from the fully coupled numerical simulations are explained by a simplified time‐scale analysis based on coupled and decoupled models. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
16.
Alexander H.D. Cheng 《国际地质力学数值与分析法杂志》2020,44(4):455-483
This paper extends the Biot theory of poroelasticity from the saturated to unsaturated case. The Biot phenomenological model uses parameters that are easily observable, such as the deformation of porous frame, total stress, pore pressure, and fluid specific discharge. Such model is preferred for engineering applications. At this macroscopic level, the extension of Biot theory from saturated to unsaturated is straightforward. The constitutive constants, however, are combined properties of solid, pore space, and fluids. In the unsaturated case, the constants are functions of the degree of saturation. Their measurements and tabulation over a range of saturation is generally not feasible for practical applications. In this work, a Biot-Willis type analysis is performed for the unsaturated case to provide a theory that the bulk material constants can be evaluated using laboratory measurable micromechanical constants under saturated condition, plus a capillary pressure curve (saturation versus suction pressure) typically available for unsaturated porous medium, without the need of measurement at each state of saturation. In particular, it is demonstrated that the surface energy contained in the meniscus interface manifests as a “capillary modulus,” given by the negative inverse slope of the capillary pressure curve. A rigorous analysis based on the thermodynamic variational energy approach is also conducted to lend theoretical support to the phenomenological approach. The presented model can bring a closure to the practical engineering modeling of the deformation of partially saturated porous medium that lacks the information of material constants over the range of saturation. 相似文献
17.
A FEM model for analysis of fully coupled multiphase flow, thermal transport and stress/deformation in geological porous media was developed based on the momentum, mass and energy conservation laws of the continuum mechanics and the averaging approach of the mixture theory over a three phase (solid–liquid–gas) system. Six processes (i.e. stress–strain, water flow, gas flow, vapor flow, heat transport and porosity evolution processes) and their coupling effects are considered, which not only makes the problem well-defined, but renders the governing PDEs closed, complete, compact and compatible. Displacements, pore water pressure, pore gas pressure, pore vapor pressure, temperature and porosity are selected as basic unknowns. The physical phenomena such as phase transition, gas solubility in liquid, thermo-osmosis, moisture transfer and moisture swelling are modeled. As a result, the relative humidity and other related variables in porous media can be evaluated on a sounder physical basis. A three dimensional computer code, THYME3D, was developed, with eight degrees of freedom at each node. The laboratory CEA Mock-up test and the field scale FEBEX benchmark test on bentonite performance assessment for underground nuclear waste repositories were used to validate the numerical model and the software. The coupled THM behaviors of the bentonite barriers were satisfactorily simulated, and the effects and impacts of the governing equations, constitutive relations and property parameters on the coupled THM processes were understood in terms of more straightforward interpretation of physical processes at microscopic scale of the porous media. The work developed enables further in-depth research on fully coupled THM or THMC processes in porous media. 相似文献
18.
The clay-core rockfill dam is a multibody contact system in which the hydromechanical response of the clay core plays a crucial role. This complex problem is highly challenging to model numerically. We present a numerical approach that considers the multibody contact, consolidation, and strong geometric and material nonlinearities for the modeling of clay-core rockfill dams. Within the framework of the dual mortar finite element method, the presented approach considers the contact bodies as independent porous media continuums. The nonlinear contact conditions are derived based on the effective contact traction on contact interfaces and pore pressure continuity. The weak forms are obtained by introducing Lagrange multipliers as additional unknowns, which are then condensed through an extended general transformation. The presented method is first validated with a patch test considering the contact between two porous media. Then, a three-dimensional analysis of the Rumei clay-core rockfill dam is performed. The main numerical analysis concerns are the two observation galleries planned for construction inside the clay core. The galleries consist of dozens of tunnel-like concrete blocks, giving rise to complex concrete-concrete and concrete-clay contacts. The discontinuous separation and sliding between concrete blocks are investigated. For the concrete-concrete contact, both hard and soft joint approaches are evaluated and compared. The pore pressure results of the concrete structures are also analyzed. 相似文献
19.
介绍了三峡花岗岩体裂隙毛管压力-饱和度试验。试验采用互不溶混驱替法。试验结果表明,在渗流基本特征方面,裂隙非饱和渗流毛管压力-饱和度关系曲线与空隙介质水分特征曲线具有相似性,如毛管压力-饱和度关系曲线的滞后现象;湿润流体(水)的排泄曲线具有进气压和束缚水饱和度;非湿润流体的吸湿曲线具有残余饱和度。这种相似性表明,孔隙介质非饱和渗流的研究成果可用于裂隙非饱和渗流,孔隙介质水分特征曲线的解析模型,可用于研究裂隙毛管压力-饱和度关系曲线和拟合毛管压力-饱和度排泄曲线的试验数据。 相似文献
20.
This article presents a micromechanical approach to the problem of unsaturated water flow in heterogeneous porous media in
transient conditions. The numerical formulation is based on the two-scale model obtained previously by periodic homogenization.
It allows for a coupled solution of the non-linear flow equations at macroscopic and microscopic scales and takes into account
the macroscopic anisotropy of the medium and the local non-equilibrium of the capillary pressure. The model was applied to
simulate two-dimensional water infiltration at constant flux into an initially dry medium containing inclusions of square
and rectangular shapes. The numerical results showed the influence of the inclusion–matrix conductivity ratio and the local
geometry on the macroscopic behavior. The influence of the conductivity ratio manifested itself by the acceleration or retardation
of the onset of the macroscopic water flux at the outlet, while the local geometry (anisotropy) significantly affected the
macroscopic spatial distribution of the water flux. Such type of approach can be extended to simulate coupled phenomena (for
example hydro-mechanical problems) with evolving local geometry. 相似文献