共查询到20条相似文献，搜索用时 375 毫秒
1.
Propeller modelling in CFD simulations is a key issue for the correct prediction of hull-propeller interactions, manoeuvring characteristics and the flow field in the stern region of a marine vehicle. From this point of view, actuator disk approaches have proved their reliability and computational efficiency; for these reasons, they are commonly used for the analysis of propulsive performance of a ship. Nevertheless, these models often neglect peculiar physical phenomena which characterise the operating propeller in off-design condition, namely the in-plane loads that are of paramount importance when considering non-standard or unusual propeller/rudder arrangements. In order to emphasize the importance of these components (in particular the propeller lateral force) and the need of a detailed propeller model for the correct prediction of the manoeuvring qualities of a ship, the turning circle manoeuvre of a self-propelled fully appended twin screw tanker-like ship model with a single rudder is simulated by the unsteady RANS solver χnavis developed at CNR-INSEAN; several propeller models able to include the effect of the strong oblique flow component encountered during a manoeuvre have been considered and compared. It is emphasized that, despite these models account for very complex and fundamental physical effects, which would be lost by a traditional actuator disk approach, the increase in computational resources is almost negligible. The accuracy of these models is assessed by comparison with experimental data from free running tests. The main features of the flow field, with particular attention to the vortical structures detached from the hull are presented as well. 相似文献
2.
This paper is the continuation of the work described in [14], dedicated to the presentation of the results of propeller performance in behind-hull during straight ahead motion obtained by a novel experimental set-up for the measurements of single blade loads. In the present case, the study shows and discusses the single blade and propeller loads developed during steady turning conditions, that were simulated by means of free running, self propelled maneuvering tests for a twin screw configuration. Maneuvering conditions are critical for the ship propulsion system, because the performance of the propeller and the side effects related to its functioning (propeller–hull induced pressure and vibrations, noise) are completely different with respect to the design condition in straight ahead motion. Thrust and torque and generation of in-plane loads (force and moments), developed by the blade during the period, evolve differently for the two propellers, due to different propeller–wake interactions. The understanding and the accurate quantification of propeller loads, in these realistic operative scenarios, are pivotal to design low emission and comfortable ships, fulfilling the requirements of safety and continuity of operations at sea. The analysis is carried out revisiting the investigation in [14] for three different speeds (FN = 0.26, 0.34 and 0.40) and a large set of rudder angles that span moderate and tight maneuvers. 相似文献
3.
Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions. 相似文献
4.
Flow characteristics of the hull wake behind a container ship model were investigated under different loading conditions (design and ballast loadings) by employing the particle image velocimetry (PIV) technique. Measurements were made at four transverse locations and two longitudinal planes for three Reynolds numbers (Re) (=U0Lpp/ν, where U0 is the freestream velocity, Lpp is the length between two perpendiculars of the ship model and ν is the kinematic viscosity) of 5.08×105, 7.60×105, and 1.01×106. It was observed that symmetric, large-scale, longitudinal counter-rotating vortices (with respect to centerline) of nearly the same strength were formed in the near wake. For the ballast-loading condition, the vortices appear at propeller plane below the propeller-boss. The vortex center exhibits a significant upward shift near the propeller-boss as the Reynolds number increase, and as the flow moves downstream. Under the design-loading condition, the vortices first appear at a further downstream location than that for the ballast-loading condition above the propeller-boss. This difference in the flow structure can significantly change the inflow conditions to the propeller blades, such as the streamwise mean velocity profiles and turbulence intensity distributions at the propeller plane. In particular, under the ballast-loading condition, asymmetric inflow may weaken the propulsion and cavitation performance of the marine propeller. 相似文献
5.
During the past 30 years there has been a steady growth in the size and number of ships that use the Strait of Istanbul (Bosporus) which is one of the most hazardous, crowded, difficult and potentially dangerous waterways in the world. There have been over 200 accidents over the past decade resulting in loss of life and serious damage to the environment. This paper presents the results of a real-time ship manoeuvring simulation study investigating the manoeuvring performance of large tankers in the Bosporus. The study was conducted with a ship manoeuvring simulator which is capable of subjecting a given hull form to any combination of environmental conditions, i.e. wind, current and wave drift forces. The results indicate that when realistic environmental conditions are taken into account the size of ships which can navigate safely in compliance with the traffic separation lanes is limited. 相似文献
6.
Michio Ueno 《Ocean Engineering》2010,37(10):879-890
A submersible surface ship (SSS) is based on a novel concept that the SSS goes on surface like conventional ships in moderate seas but goes underwater in rough seas to the depth sufficient to avoid wave effects. The SSS has a wing system that produces downward lift to go underwater with preserving the residual buoyancy for its safety. The SSS is expected to be able to keep both safety and punctuality even if it encounters unexpected bad weather.The motion of the SSS is studied. The equations of motion are formulated and the procedures for estimating hydrodynamic derivatives are presented. The hydrodynamic derivatives are estimated for a SSS having a configuration, a hull with a pair of main wings and a pair of horizontal tail wings. Using these estimated hydrodynamic derivatives, calculation of the SSS motion is carried out.The calculation results show some specific aspects of the SSS especially for effects of the elevator of main wings and horizontal tail wings, aileron of main wings, rudder and propeller revolution. It is confirmed that the existence of static roll restoring moment and having large hull comparing with wing area play important roles in the motion of the SSS. 相似文献
7.
This paper presents a Recursive Neural Network (RNN) manoeuvring simulation model for surface ships. Inputs to the simulation are the orders of rudder angle and ship’s speed and also the recursive outputs velocities of sway and yaw. This model is used to test the capabilities of artificial neural networks in manoeuvring simulation of ships. Two manoeuvres are simulated: tactical circles and zigzags. The results between both simulations are compared in order to analyse the accuracy of the RNN. The simulations are performed for the Mariner hull. The data generated to train the network are obtained from a manoeuvrability model performing the simulation of different manoeuvring tests. The RNN proved to be a robust and accurate tool for manoeuvring simulation. 相似文献
8.
Marine propellers usually operate in a spatially nonuniform wake and then the propeller exciting forces are produced. These exciting forces will cause serious hull vibration and noise radiation. So, there are many researches on the exciting forces of propellers. However, the effects of the shaft and blade elasticity are ignored in most studies. Therefore, firstly, considered the effects of the shaft and blade elasticity, a fluid–structure interaction dynamic model of the fluid-propeller-shaft system is established by coupled BEM and FEM. Then, based on this model, the characteristics of axial exciting force and theirs transmission mechanism to the hull via the shaft are studied. The research results show that first, there are two kinds of vibration modes for blade bending vibration: global mode and local mode. The elastic coupling effect between the blade and the shafting only affects the global mode, but hardly affects the local mode of the blade. Secondly, during the transmission of axial exciting force to the hull through the blades and shafting, only the global mode of the blades can amplify it, while the local mode cannot. These studies could provide a guideline for the optimal design of the propeller-shaft system to make the exciting force transmitted to the ship hull via the shafting be the smallest. 相似文献
9.
The paper deals with the self-propulsion problem, i.e. the solution of the flow around the hull that advances at uniform speed due to the action of its own propeller. A coupled BEM/RANS approach, previously proposed for a simpler case with only rudder and propeller, has been extensively analysed to highlight the strength and the weakness of the method. The proposed analyses consider the influence of different turbulence modelling, the role of the interpolating algorithm for the inclusion of body forces into the RANS domain, a mesh and simulation time step sensitivity study and the influence of the extrapolation procedure for the definition of the effective wake to the propeller in the light of the lightest and the most affordable computational setup for daily accurate calculations. At first, the well-known Kriso Container Ship (KCS) test case is considered. This ship has been widely investigated in the context of different research projects and a large amount of data (both measurements and numerical calculations) is available to validate the solution approach and to highlight the benefits, as well as the weaknesses, of the proposed coupled BEM/RANS approach versus established but computationally demanding calculations based only on RANS simulations. Once the approach has been developed and validated via the KCS test case, calculations have been repeated in the case of completely different ships, in order to evaluate its general applicability and to test the robustness and the reliability of the proposed procedure. 相似文献
10.
Traditionally, propeller design has been focused on all activities necessary to obtain a propeller featuring a high efficiency, avoiding erosive cavitation for given operating conditions and having adequate structural strength. In recent years, more and more challenging requirements have been imposed, such as the reduction of radiated noise and pressures pulses, requiring more precise analyses and methods in the optimization of the propeller performance. On the other hand, the evaluation of the propeller strength still relies on simplified methods, which basically consider the blade as a cantilever beam subjected to characteristic static forces. Since the loads acting on a blade are variable in the blade revolution and in different operating conditions throughout the ship life, a procedure to account for the influence of fatigue phenomena is proposed. The fatigue assessment could reduce the safety factor in the propeller scantling rules and allow improving the quality of propeller design (e.g. obtaining higher efficiency, margin on cavitation phenomena, less noise). 相似文献
11.
System identification provides an effective way to predict the ship manoeuvrability. In this paper several measures are proposed to diminish the parameter drift in the parametric identification of ship manoeuvring models. The drift of linear hydrodynamic coefficients can be accounted for from the point of view of dynamic cancellation, while the drift of nonlinear hydrodynamic coefficients is explained from the point of view of regression analysis. To diminish the parameter drift, reconstruction of the samples and modification of the mathematical model of ship manoeuvring motion are carried out. Difference method and the method of additional excitation are proposed to reconstruct the samples. Using correlation analysis, the structure of a manoeuvring model is simplified. Combined with the measures proposed, support vector machines based identification is employed to determine the hydrodynamic coefficients in a modified Abkowitz model. Experimental data from the free-running model tests of a KVLCC2 ship are analyzed and the hydrodynamic coefficients are identified. Based on the regressive model, simulation of manoeuvres is conducted. Comparison between the simulation results and the experimental results demonstrates the validity of the proposed measures. 相似文献
12.
Many disastrous oil spill accidents from damaged vessels become worse especially when the early treatment is not prompt enough. To properly handle this type of accidents and prevent further disasters, International Maritime Organization establishes and imposes various rules and regulations. Better understanding of the propulsive performance of damaged vessels is important for containing the oil spill while the vessels are being towed or self-propelled. In the present study, both experimental and computational methods were used to investigate the flow phenomena around the hull and the hydrodynamic performances of a VLCC in various damaged conditions. From the resistance and self-propulsion test results, it is found that higher power is required to propel the ship especially with the bow trim. Wake measurement data provide physical insight into the factors to be considered for the propeller operation in damaged conditions. 相似文献
13.
The purpose of this paper is to optimise the hydroelastic performance of a composite marine propeller to reduce vibration and dynamic stress. A hydroelasticity method based on the finite element method (FEM) coupled with computational fluid dynamics (CFD) is used to simulate the composite marine propeller in a non-uniform wake. Composite blades can be considered as a cantilever-like laminated structure experiencing an unsteady hydrodynamic load and centrifugal force. The objective of the improved design is to minimise the vibratory hub loads. The ply angle and stacking sequence are considered as the design variables. The nonlinear periodic transient responses and vibration hub loads of the composite blade are obtained by solving coupled equations using the Newton–Raphson numerical procedure. Compared to the starting design of the propeller, the optimum solution results in a 49.6–70.6% reduction of the 7/rev hub loads. 相似文献
14.
The present investigation focuses on the effects of the stern appendages and the propulsion system on the hydro-loads generated by the propeller during off-design conditions, with particular emphasis on the in-plane components. Recent experimental investigations carried out by free running model tests [7], [8] and CFD analysis [5] for a modern twin screw model, highlighted that maneuvers at small drift angles and yaw rates might be as critical as the tighter ones due to complex propeller-wake interactions. Therefore, design criteria should take into account also these operative conditions, in order to reduce the effects of propeller-wake interaction phenomena that degrade the overall propulsive efficiency, induce shaft/hull structural vibration and increase noise emission. In the present study we analyze the effects of geometric and propulsive modifications with respect to the twin screw configuration studied in [5]. In particular, the effect of the centreline skeg, propeller direction of rotation and control strategies of the propulsion plant on the propeller bearing loads have been investigated from the analysis of the nominal wake in maneuvring conditions, computed by unsteady RANSE simulations coupled with a propeller model based on Blade Element Theory. The considered test cases were turning circle maneuvers with different rudder angles at FN = 0.265. 相似文献
15.
Resistance and propulsion characteristics of various commercial ships based on CFD results 总被引：2，自引：0，他引：2
This paper uses computational tools to examine the speed performance of various types of commercial ships including resistance and propulsion characteristics. Eight commercial ships built in the last decade were selected for the study. They include four large-sized container carriers, one bulk carrier, one VLCC, and two LNG carriers. The Reynolds averaged Navier-Stokes equation has been utilized, and the computations were executed under the same conditions of the model tests to predict the speed performance, i.e., resistance and self-propulsion. The self-propulsion point was obtained from load-varying tests. The speed performance was predicted based on the model-ship performance analysis method of the revised ITTC’78 method. The limiting streamlines on the hull, wave characteristics around the model ship, and the wake characteristics on the propeller plane were also investigated. After completing the computations, a series of model tests were conducted to evaluate the accuracy of the computational predictions. The predictions clearly reveal the differences in the resistance and propulsion characteristics regarding the various types of commercial ships, and may be applicable to hull-form design. 相似文献
16.
系泊船非线性波浪力时域计算:二维模型 总被引：7，自引：1，他引：6
为找到具有工程实用价值的港口系泊船波浪力的时域计算方法,建立了在港口中存在系泊船时非线性波浪力时域计算的垂直二维耦合模型:用Boussinesq方程计算船的两侧的外域,用欧拉方程计算船底面下的内域,两域在交界面处的连接条件是流量连续和压力相等.将复平面内的边界元方法应用于所研究问题,对耦合模型进行了验证.进行了相关模型实验,实验结果与数值计算结果比较表明这两种数值计算模型都具有满意的精度,但耦合模型的计算效率要远远高于边界元方法的计算效率.本耦合模型的数学处理简单,可适用于工程计算. 相似文献
17.
Computations of self-propulsion free to sink and trim and of motions in head waves of the KRISO Container Ship (KCS) model 总被引：2，自引：0，他引：2
Two computations of the KCS model with motions are presented. Self-propulsion in model scale free to sink and trim are studied with the rotating discretized propeller from the Hamburg Model Basin (HSVA) at Fr = 0.26. This case is particularly complex to simulate due to the close proximity of the propeller to the rudder. The second case involves pitch and heave in regular head waves. Computations were performed with CFDShip-Iowa version 4.5, a RANS/DES CFD code designed for ship hydrodynamics. The self-propulsion computations were carried out following the procedure described in Carrica et al. [1], in which a speed controller is used to find the propeller rotational speed that results in the specified ship velocity. The rate of revolutions n, sinkage, trim, thrust and torque coefficients KT, KQ and resistance coefficient CT(SP) are thus obtained. Comparisons between CFD and EFD show that the rate of revolutions n, thrust and torque coefficients KT and KQ have higher prediction accuracies than sinkage and trim. For the simulation of pitch and heave in head waves, the geometry includes KCS hull and rudder under three conditions with two Froude numbers and three wave length and amplitude combinations. 0th and 1st harmonic amplitudes and 1st harmonic phase are computed for total resistance coefficient CT, heave motion z and pitch angle θ. Comparisons between CFD and EFD show that pitch and heave are much better predicted than the resistance. In both cases comparisons with simulations by other authors presented at the G2010 CFD Workshop [2] using different CFD methodologies are included. 相似文献
18.
A two-frame particle image velocimetry (PIV) technique is used to investigate the wake characteristics behind a marine propeller with 4 blades at high Reynolds number. For each of 9 different blade phases from 0° to 80°, 150 instantaneous velocity fields are measured. They are ensemble averaged to study the spatial evolution of the propeller wake in the region ranging from the trailing edge to one propeller diameter (D) downstream location. The phase-averaged mean velocity shows that the trailing vorticity is related to radial velocity jump, and the viscous wake is affected by boundary layers developed on the blade surfaces and centrifugal force. Both Galilean decomposition method and vortex identification method using swirling strength calculation are very useful for the study of vortex behaviors in the propeller wake region. The slipstream contraction occurs in the near-wake region up to about X/D=0.53 downstream. Thereafter, unstable oscillation occurs because of the reduction of interaction between the tip vortex and the wake sheet behind the maximum contraction point. 相似文献
19.
This paper describes how simplified auxiliary models—metamodels—can be used to create benchmarks for validating ship manoeuvring simulation models. A metamodel represents ship performance for a limited range of parameters, such as rudder angles and surge velocity. In contrast to traditional system identification methods, metamodels are identified from multiple trial recordings, each containing data on the ship’s inherent dynamics (similar for all trials) and random disturbances such as environmental effects and slightly different loading conditions. Thus, metamodels can be used to obtain these essential data, where simple averaging is not possible. In addition, metamodels are used to represent a ship’s behaviour and not to obtain physical insights into ship dynamics. The experimental trials used for the identification of metamodels can be found in in-service recorded data. After the metamodel is identified, it is used to simulate trials without substantial deviations from the ship state parameters used for the identification. Subsequently, the predictions of the metamodels are compared with the predictions of a tested manoeuvring simulation model. We present two case studies to demonstrate the application of metamodels for moderate turning motions of two ships. 相似文献
20.
During ice-breaking navigation, a massive amount of crushed ice blocks with different sizes is accumulated under the hull of an ice-going ship. This ice slides into the flow field in the forward side of the podded propulsor, affecting the surrounding flow field and aggravating the non-uniformity of the propeller wake. A pulsating load is formed on the propeller, which affects the hydrodynamic performance of the podded propulsor. To study the changes in the propeller hydrodynamic performance during the ice podded propulsor interaction, the overlapping grid technique is used to simulate the unsteady hydrodynamic performance of the podded propulsor at different propeller rotation angles and different ice block sizes. Hence, the hydrodynamic blade behavior during propeller rotation under the interaction between the ice and podded propulsor is discussed. The unsteady propeller loads and surrounding flow fields obtained for ice blocks with different sizes interacting with the podded propulsor are analyzed in detail. The variation in the hydrodynamic performance during the circular motion of a propeller and the influence of ice size variation on the propeller thrust and torque are determined. The calculation results have certain reference significance for experiment-based research, theoretical calculations and numerical simulation concerning ice podded propulsor interaction. 相似文献