共查询到20条相似文献，搜索用时 62 毫秒
1.
Joonmo Choung 《Ocean Engineering》2009,36(15-16):1158-1163
In order to verify the validity and applicability of the porous plasticity model for the simulation of non-local plastic fractures, punch tests are carried out for round steel plates of JIS G3131 SPHC. Incremental tensile coupon tests for the material are also conducted to obtain the plastic mechanical properties. Material parameters required for the porous plasticity model are identified through parametric numerical simulations of the coupon tests. It is proved that that force vs. indentation curves from punch test simulations using the porous plasticity model with the identified material parameters show good agreement with punch test results. It is also verified that simulated fracture shapes in the punch specimens are almost similar to the experimental ones in which fracture occurs along the circumferential edge of indenter where the hydrostatic stress develops highly. 相似文献
2.
When studying the low-cycle fatigue crack initiation life of notched plates, the effects of fatigue short crack and accumulative plastic damage in the vicinity of the notch should be considered. The low-cycle fatigue crack initiation life of notched plates has been revised in the analysis process by considering the short crack initiation and expansion of notch stress concentration area. By determining the accumulative plastic deformation in the vicinity of a notch under low-cycle fatigue loads, a predictive model of low-cycle fatigue crack initiation life was presented for notched plates, and the relative influence factors were quantitatively analyzed. A comparison study verified that the results obtained from the presented calculation model correlate quite well with those from the existing experiments. Some important conclusions were drawn from the study on considering the effects of short crack and accumulative plastic damage. The presented method may be used for predicting the low-cycle fatigue crack initiation life of ship plate. 相似文献
3.
This paper first reviews the physical meanings and the expressions of two representative strain rate models: CSM (Cowper–Symonds model) and JCM (Johnson–Cook model). Since it is known that the CSM and JCM are suitable for low-intermediate and intermediate-high rate ranges, many studies regarding marine accidents such as ship-to-ship collisions, ship-to-rock groundings, and explosions in FPSO have employed the former in particular. A formula to predict the material constant of the CSM is introduced from a literature survey. The validity of the formula is proved by comparing with strain rate test results of high strength marine structural steels of DH-36. Numerical simulations with two different material constitutive equations, the classical metal plasticity model based on the von Mises yield function and the micromechanical porous plasticity model based on the Gurson yield function, have been carried out for stiffened plates under impact loading. It is concluded that the porous plasticity model with the porosity fracture criterion can quantitatively predict plastic deformation process and final fracture under impact loading if the material constants are properly chosen. 相似文献
4.
The effects of different lateral confinement stress on the fatigue behavior of and cumulative damage to plain concrete are investigated experimentally. Eighty 100 mm x 100 mm x 100 mm specimens of ordinary strength concrete are tested under constant- or variable-amplitude fatigue loading and lateral confinement pressure in two orthogonal directions. A fatigue equation is developed by modifying the classical Aas-Jakobsen S-N equation for taking into account the effect of the confined stress on fatigue strength of plain concrete. The results of variable-amplitude fatigue tests indicate that the linear damage theory proposed by Palmgren and Miner is unreasonable in the biaxial stress state. A nonlinear cumulative damage model that could model the effects of the magnitude and sequence of variable-amplitude fatigue loading and lateral confinement pressure is proposed on the basis of the evolution laws of the residual strains in the longitudinal direction during fatigue tests. The residual fatigue life predic 相似文献
5.
Tian-Shun Hou Wei Wang Ya-Sheng Luo Jin-Qian Dang Xiu-Juan Yang 《Marine Georesources & Geotechnology》2013,31(3):264-276
To reveal the influence of material composition on mechanical properties of light-weight soil, stress-strain -volumetric strain characteristics and Poisson's ratio of mixed soil were researched by consolidated drained shear tests. The results show that light-weight soil is a kind of structural soil, so its mechanical properties are affected by mixed ratio and confining pressure, and mixed soil possesses structural yield stress. When confining pressure is less than the structural yield stress, strain softening occurs; when confining pressure is more than the structural yield stress, strain hardening is observed. There are two kinds of volume change behavior: shear contraction and shear dilatancy. Shear dilatancy usually leads to strain softening, but there isn't an assured causal relationship between them. Poisson's ratio of mixed soil is a variational state parameter with the change of stress state, it decreases with increased confining pressure, and it increases with increased stress level. When axial strain is near 5%, Poisson’ ratio is gradually close to a steady value. The main range of Poisson's ratio is 0.25～0.50 when confining pressure changes from 50 to 300 kPa. When unconfined compressive strength of mixed soil is less than 328 kPa, its stress-strain-volumetric strain characteristics can be predicted very well by Duncan-Chang model (E-B model). However, when the range of unconfined compressive strength is [328 kPa, 566 kPa], the model can't predict stress-strain characteristics accurately when confining pressure is under 200 kPa, and it also can't predict the strong shear dilatancy phenomenon of mixed soil under low confining pressure. 相似文献
6.
The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results;besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen. 相似文献
7.
电化学修复技术是提升既有钢筋混凝土结构耐久性重要方法,能有效除去有害氯离子,延长结构使用寿命。采用电化学修复技术对钢筋混凝土结构进行耐久性修复时,作为阴极的钢筋会发生析氢反应,当钢筋表面的氢浓度达到临界值时,钢筋的塑性会降低,并发展成裂纹,导致钢筋出现氢脆现象。开展了不同电化学参数的电化学修复试验,并采用物理方法和力学方法进行了氢致塑性降低的影响分析。结果表明氢致塑性降低与电流密度、应力水平均相关;当清楚工程构件的受力状态时,可采用合适的电流密度对构件进行电化学修复,控制塑性损失程度在工程的可接受范围内,以达到钢筋氢脆控制的目的。 相似文献
8.
Each year in the world, there is significant amount of dredged slurries generated during geotechnical jobs. In the slurry storage process, the rheological behavior is a key factor affecting the motion of dredged slurries. To gain better understanding on this behavior, experiments on dredged slurries with different liquid limits are conducted using rotary viscometer. It has been found that, as water content increases, slurry property can change from Bingham plastic fluids to Newtonian fluids. In log–log coordinates, their corresponding yield stress and plastic viscosity are in linear relationship with their water contents and the intersection of these two lines can be treated as the turning point which is 4.7 times the liquid limit. The yield stress and plastic viscosity of different dredged slurries can be normalized efficiently using normalized water content. So, in this paper, a new quantitative prediction method for yield stress and plastic viscosity is proposed, which is effective for use in alkined modes of motion, is proposed. 相似文献
9.
为了研究波流共同荷载作用下开挖基槽附近海床动态响应和液化破坏情况，提出一个二维耦合计算模型，采用雷诺时均纳维-斯托克斯（RANS）方程描述波浪运动情况，通过设定侧边界条件实现稳定流场。海床部分通过求解Biot固结方程，得到波流荷载下海床中的应力和位移情况。将模型计算结果与水槽试验数据和解析解进行比较，验证了波流模型和海床模型的有效性。在此模型基础上，分析得到了开挖之后海床新的应力和固结状态。同时，通过参数分析得到了波流耦合情况下波浪形态的变化，以及海流对海床液化情况和孔压情况的影响。最后，通过线性回归计算得到最大液化深度与流速的拟合关系曲线。计算结果可用于判断基槽开挖后不规则海床的液化情况，对相关研究和实际工程具有一定参考意义。 相似文献
10.
11.
An elastoplastic damage constitutive model to simulate nonlinear behavior of concrete is presented. Similar to traditional plastic theory, the irreversible deformation is modeled in effective stress space. In order to better describe different stiffness degradation mechanisms of concrete under tensile and compressive loading conditions, two damage variables, i.e., tension and compression are introduced, to quantitatively evaluate the degree of deterioration of concrete structure. The rate dependent behavior is taken into account, and this model is derived firmly in the framework of irreversible thermodynamics. Fully implicit backward-Euler algorithm is suggested to perform constitutive integration. Numerical results of the model accord well with the test results for specimens under uniaxial tension and compression, biaxial loading and triaxial loading. Failure processes of double-edge-notched (DEN) specimen are also simulated to further validate the proposed model. 相似文献
12.
Zhang Lianying Hu Yunchang Li Xiangjing Doctor Lecturer Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin Professor Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin Master Dept. of Ocean Engineering Naval Architecture Tianjin University Tianjin 《中国海洋工程》1998,(1)
In this paper,the problem of reliability-based optimal design of simple offshore platform isstudied,and a nonlinear fatigue damage model based on damage mechanics and genetic algorithms areused in the fatigue reliability optimum design of the structure under stochastic wave load.The fatigue dam-age model and the yield failure reliability analyzing model are used in the paper.The reliability of the mod-els and the effectiveness of genetic algorithm are shown by the results of optimum design. 相似文献
13.
缩头竹节虫Maldane sarsi Malmgren, 1865隶属竹节虫科Maldanidae Malmgren, 1867,广泛分布于世界各大海域中,是海洋底栖生态调查中的常见多毛类物种。根据中国科学院海洋研究所的馆藏标本,对采集于中国海及楚科奇海的缩头竹节虫的关键分类学特征进行了分析和对比,并对该种进行了重新描述。该种可以根据以下特征鉴定:具有头板和尾板;头脊高呈拱形隆起;头缘膜两侧具有深缺刻,其他部分光滑,背部的头缘膜向前伸展形成袋状结构;体前部棕褐色的色素点有或无;尾板具有缘膜,两侧具深裂,尾板缘膜的背侧光滑,腹侧光滑或形成钝锯齿形的浅裂叶。 相似文献
14.
Reservoirs where tectonic fractures significantly impact fluid flow are widespread. Industrial-level shale gas production has been established from the Lower Cambrian Niutitang Formation in the Cen'gong block, South China; the practice of exploration and development of shale gas in the Cen'gong block shows that the abundance of gas in different layers and wells is closely related to the degree of development of fractures. In this study, the data obtained from outcrop, cores, and logs were used to determine the developmental characteristics of such tectonic fractures. By doing an analysis of structural evolution, acoustic emission, burial history, logging evaluation, seismic inversion, and rock mechanics tests, 3-D heterogeneous geomechanical models were established by using a finite element method (FEM) stress analysis approach to simulate paleotectonic stress fields during the Late Hercynian—Early Indo-Chinese and Middle-Late Yanshanian periods. The effects of faulting, folding, and variations of mechanical parameters on the development of fractures could then be identified. A fracture density calculation model was established to determine the quantitative development of fractures in different stages and layers. Favorable areas for shale gas exploration were determined by examining the relationship between fracture density and gas content of three wells. The simulation results indicate the magnitude of minimum principal stress during the Late Hercynian — Early Indo-Chinese period within the Cen'gong block is −100 ∼ −110 MPa with a direction of SE-NW (140°–320°), and the magnitude of the maximum principal stress during the Middle-Late Yanshanian period within the Cen'gong block is 150–170 MPa with a direction of NNW-SSE (345°–165°). During the Late Hercynian — Early Indo-Chinese period, the mechanical parameters and faults play an important role in the development of fractures, and fractures at the downthrown side of the fault are more developed than those at the uplifted side; folding plays an important role in the development of fractures in the Middle-Late Yanshanian period, and faulting is a secondary control. This 3-D heterogeneous geomechanical modelling method and fracture density calculation modelling are not only significant for prediction of shale fractures in complex structural areas, but also have a practical significance for the prediction of other reservoir fractures. 相似文献
15.
海水海砂混凝土双K断裂参数的确定 总被引：1，自引：1，他引：0
采用尺寸为515 mm×100 mm×100 mm初始缝高比从0.1变化至0.8的三点弯曲梁试件,利用试验测得起裂荷载Pini、最大荷载Pmax及对应的裂缝口张开位移CMODc等参数,研究了缝高比a0/h对海水海砂混凝土双K断裂参数的影响。并以相同配合比的淡水河砂梁作为对照组,进一步研究了海砂海水混凝土双K断裂参数与普通混凝土之间的关系。结果发现海水海砂混凝土断裂参数在a0/h=0.25～0.7范围内时可以认为是一常数;海水海砂混凝土梁断裂参数比相同配合比情况下的淡水河砂梁大且对边界影响更加敏感。 相似文献
16.
Li Runpei Chen Weigang Gu Yongning
Professor Shanghai Jiao Tong University Shanghai Assistant Shanghai Jiao Tong University Shanghai 《中国海洋工程》1996,(1)
In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained. 相似文献
17.
The undrained shear strength normalized by the yield consolidation pressure, su/pc', is presented for four coastal sites: Busan/Gwangyang and Incheon/Gunsan, having the characteristics of high and low plasticity, respectively. The field vane shear strengths, su(FVT), were compared with unconfined compressive strength, qu/2 which has been used as a representative testing method in Korea. Many researchers have suggested that the undrained shear strength normalized by the yield consolidation pressure, su/pc', depends on Ip. However, the undrained shear strength normalized by the yield consolidation pressure, su/pc' is in the range of 0.25–0.35, independently of the plasticity index, Ip except for su/pc' using qu/2 values in the case of soils having a low plasticity, such as Incheon and Gunsan intermediate soils. Bjerrum's correction factor has been commonly applied to evaluate mobilized undrained shear strength using the field vane test in Korea. However, the corrected undrained shear strengths using Bjerrum's correction factor, including Morris and Williams' method, were considerably underestimated for Korean marine clay when compared with the qu/2 values that have been used as the mobilized undrained shear strength for practical design in Korea. 相似文献
18.
AbstractHollow cylinder torsional shear tests on loose isotropically and anisotropically consolidated calcareous sand were conducted to investigate the cyclic behavior under three different linear stress paths, including horizontal line, oblique line, and vertical line stress paths, in a coordinate system of the normal stress difference and the horizontal shear stress. The dominant strain components of the isotropically consolidated specimens are affected by the stress paths. With increasing consolidation stress ratio, axial strain gradually becomes the dominant strain component under the three different stress paths. The cyclic strength of the isotropically consolidated specimens under the three different stress paths are almost the same, while for the anisotropically consolidated specimens, the cyclic strengths are strongly affected by the stress paths. These results indicate that conventional cyclic triaxial tests may overestimate cyclic strength in some cases. Irrespective of the stress paths and cyclic stress ratios, the terminal residual excess pore pressure ratio decreases with increasing consolidation stress ratio. Moreover, an empirical equation is proposed to describe the relationship between the normalized shear work and the normalized residual excess pore pressure ratio. The comparative study reveals that the relationship proposed for silica sand is not suitable for the dynamic analyses of calcareous sand. 相似文献
19.
A high-quality experimental study including a large number of tests which correspond to full-scale coastal boundary layer flows is conducted using an oscillating water tunnel for flow generations and a Particle Image Velocimetry system for velocity measurements. Tests are performed for sinusoidal, Stokes and forward-leaning waves over three fixed bottom roughness configurations, i.e. smooth, “sandpaper” and ceramic-marble bottoms. The experimental results suggest that the logarithmic profile can accurately represent the boundary layer flows in the very near-bottom region, so the log-profile fitting analysis can give highly accurate determinations of the theoretical bottom location and the bottom roughness. The first-harmonic velocities of both sinusoidal and nonlinear waves, as well as the second-harmonic velocities of nonlinear waves, exhibit similar patterns of vertical variation. Two dimensionless characteristic boundary layer thicknesses, the elevation of 1% velocity deficit and the elevation of maximum amplitude, are found to have power-law dependencies on the relative roughness for rough bottom tests. A weak boundary layer streaming embedded in nonlinear waves and a small but meaningful third-harmonic velocity embedded in sinusoidal waves are observed. They can be only explained by the effect of a time-varying turbulent eddy viscosity. The measured period-averaged vertical velocities suggest the presence of Prandtl's secondary flows of the second kind in the test channel. Among the three methods to infer bottom shear stress from velocity measurements, the Reynolds stress method underestimates shear stress due to missed turbulent eddies, and the momentum integral method also significantly underestimates bottom shear stress for rough bottom tests due to secondary flows, so only the log-profile fitting method is considered to yield the correct estimate. The obtained bottom shear stresses are analyzed to give the maximum and the first three harmonics, and the results are used to validate some existing theoretical models. 相似文献
20.
Myint Win Bo Victor Choa Jian Chu Arul Arulrajah 《Marine Georesources & Geotechnology》2017,35(6):847-856
The compressibility characteristics of Singapore marine clay in reconstituted and undisturbed states were studied using oedometer, constant rate of strain, Rowe cell, and isotropic consolidation tests. The intrinsic compression curve of the reconstituted clay was found to be similar to that proposed earlier with some minor deviations at low vertical stresses of less than 100?kPa. The field and laboratory compression behaviors were found to be similar, hence the laboratory curve could be used as a reference for interpreting the field behavior. Factors affecting the measurements of compression index and yield stress were discussed. As the coefficient of lateral earth pressure at the top upper clay was close to 1, the compression curves of vertically and horizontally trimmed samples were almost similar. The yield stress was mainly controlled by the strain rate; i.e., the higher strain rate resulted in the higher yield stress. Constrained modulus as derived from cone penetration tests and flat dilatometer tests were also examined and compared with laboratory test results. The in situ tests showed the decrease in constrained modulus with depth and generally the dilatometer test was found to register a higher modulus value. 相似文献