共查询到20条相似文献，搜索用时 671 毫秒
1.
Structure of the footwall of a listric fault system revealed by 3D seismic data from the Niger Delta
We use three‐dimensional (3D) seismic reflection data to analyse the architecture of the footwall of a listric fault, in a gravitationally driven extensional system, in the north‐western Niger Delta. In contrast to conventional listric normal fault models with a single master listric fault plane the level of detachment switches from a deeper to shallower level. The footwall evolves through the generation of new master detachment faults and detachments, which transfers hanging wall rocks into the footwall. New detachments form by branching off pre‐existing detachment levels, cutting‐up through stratigraphy to the next mechanical weakness, separating discrete sections of extended strata. As a consequence a deeper, older array of seaward‐dipping, tilted extensional fault blocks is now located in the footwall beneath the master listric detachment fault. The structural complexity located below the master detachment fault highlights extensional episodes on separate detachment faults that are not captured in conventional listric models. We speculate that changes in the level of the detachment are caused by mechanical weaknesses controlled by lithology, pore pressure and episodes of sediment loading related to deltaic progradation. 相似文献
2.
The Emme Delta is a small glacilacustrine delta, which developed on the southern flank of the Wesergebirge Mountains in NW Germany. Shallow shear‐wave seismic surveys allow a detailed assessment of the structural style of the delta body. Two different fault systems are developed within the delta, both showing syn‐sedimentary activity. The faults have planar to slightly listric geometries and show vertical offsets in a range of 2–15 m. They form small graben and half‐graben systems, which locally show roll‐over structures. The fill of the half‐grabens has a wedge‐shaped geometry, with the greatest sediment thickness close to the fault. The fault system in the upper portion of the Emme Delta is restricted to the delta body and probably gravity induced. In the lower portion of the delta, normal faults occur that originate in the underlying Jurassic basement rocks and penetrate into the delta deposits. The grid of seismic lines shows that the normal faults are trending E–W. This fits to a late Triassic–early Jurassic deformation phase in the Central European Basin System. We hypothese that these faults were reactivated during the Pleistocene by the advancing ice‐sheet, water and sediment loading. Based on the seismic data set, an overall model for the reactivation of the basement fault was developed. The advancing ice‐sheet caused far field extension, which might have reactivated pre‐existing normal faults. Later, the fault activity was enhanced due to sediment and water loading. In addition, high pore pressure due to lake formation might have supported the slip processes along the faults. After glacial unloading and lake drainage, the fault activity stopped. 相似文献
3.
《Basin Research》2018,30(4):688-707
Investigations of syn‐sedimentary growth faults in the Last Chance delta (Ferron Sandstone, Utah, USA) show that fault‐bounded half‐grabens arrested high amounts of sand in the mouth bar and/or distributary channel areas. Fault‐controlled morphology causes changes in routing of the delta top to delta front drainage towards the long axis of half‐grabens. Faulting was spatially and temporally non‐systematic, and polyphase, with 3D cusp/listric fault geometries instigated by linkage of variously oriented segments. Hanging wall rollover folds consisting of wedge‐shaped syn‐kinematic sand attest to rapid <1‐m slip increments on faults followed by mild erosion along crests of fault blocks and sedimentary infill of adjacent accommodation. Triangle‐zones in prodelta to delta front muds are located underneath steeper faults and interconnected rotated fault‐flats. Their geometry is that of antiformal stack duplexes, in an arrangement of low‐angle‐to‐bedding normal faults at the base, replaced by folded thrusts upwards. These faults show a brittle, frictional flow deformation mechanism ascribed to early compaction of mud. For syn‐kinematic sand, there is a change from general granular/hydroplastic flow in shear zones to later brittle failure and cataclasis, a transition instigated by precipitation of calcite cement. Extensional faulting in the Last Chance delta was likely controlled by gravity driven collapse towards the delta slope and prodelta, as is commonly observed in collapsing deltas. The trigger and driving mechanism is envisioned as localized loads from sand deposited within distributary channels/mouth bars and fault‐controlled basins along the delta top. A regional tilt and especially displacement of compacted mud below sand bodies towards less compacted muds also contributed to the faulting. 相似文献
4.
Andrés Mora Tatiana Gaona† Jonas Kley‡ Diana Montoya† Mauricio Parra Luis Ignacio Quiroz§ German Reyes† Manfred R. Strecker 《Basin Research》2009,21(1):111-137
Lower Cretaceous early syn‐rift facies along the eastern flank of the Eastern Cordillera of Colombia, their provenance, and structural context, reveal the complex interactions between Cretaceous extension, spatio‐temporal trends in associated sedimentation, and subsequent inversion of the Cretaceous Guatiquía paleo‐rift. South of 4°30′N lat, early syn‐rift alluvial sequences in former extensional footwall areas were contemporaneous with fan‐delta deposits in shallow marine environments in adjacent hanging‐wall areas. In general, footwall erosion was more pronounced in the southern part of the paleorift. In contrast, early syn‐rift sequences in former footwall areas in the northern rift sectors mainly comprise shallow marine supratidal sabkha to intertidal strata, whereas hanging‐wall units display rapid transitions to open‐sea shales. In comparison with the southern paleo‐rift sector, fan‐delta deposits in the north are scarce, and provenance suggests negligible footwall erosion. The southern graben segment had longer, and less numerous normal faults, whereas the northern graben segment was characterized by shorter, rectilinear faults. To the east, the graben system was bounded by major basin‐margin faults with protracted activity and greater throw as compared with intrabasinal faults to the west. Intrabasinal structures grew through segment linkage and probably interacted kinematically with basin‐margin faults. Basin‐margin faults constitute a coherent fault system that was conditioned by pre‐existing basement fabrics. Structural mapping, analysis of present‐day topography, and balanced cross sections indicate that positive inversion of extensional structures was focused along basin‐bounding faults, whereas intrabasinal faults remained unaffected and were passively transported by motion along the basin‐bounding faults. Thus, zones of maximum subsidence in extension accommodated maximum elevation in contraction, and former topographic highs remained as elevated areas. This documents the role of basin‐bounding faults as multiphased, long‐lived features conditioned by basement discontinuities. Inversion of basin‐bounding faults was more efficient in the southern than in the northern graben segment, possibly documenting the inheritance and pivotal role of fault‐displacement gradients. Our observations highlight similarities between inversion features in orogenic belts and intra‐plate basins, emphasizing the importance of the observed phenomena as predictive tools in the spatiotemporal analysis of inversion histories in orogens, as well as in hydrocarbon and mineral deposits exploration. 相似文献
5.
The Corinth-Patras rift as the initial stage of continental fragmentation behind an active island arc (Greece) 总被引：1，自引：0，他引：1
Abstract During the migration of the back arc extension from central to western Greece the Corinth and Patras grabens are being formed. Orthogonal opening of these graben zones is accomplished by WNW listric normal faults and NNE transfer faults which produce an along-axis fragmentation. The listric faults show an increase in the dip of the fault plane westwards as well as a decrease in the maximum extension rate from 50% to the east in the Corinth graben, to 10% to the west in the Patras graben. Similarly, towards the west, Plio-Quaternary deposits become thinner whereas Pliocene sediments thin-out indicating a westward rift propagation.
As the back arc extension migrates westwards it is interacting or is being superimposed above another orthogonal fault system consisting of NNW and ENE normal faults. These faults have been formed during general uplift behind the orogenic front which has been migrating from western Greece to the Ionian islands. The ENE-trending Rio graben which belongs to his orthogonal system connects the Patras graben to the Corinth graben and has subsequently been active as a transfer fault between them.
Plio-Quaternary geodynamic processes in central continental Greece are quite similar to those earlier processes observed in the central Aegean region which reflect the initial stage of continental break-up behind a migrating orogenic front. 相似文献
As the back arc extension migrates westwards it is interacting or is being superimposed above another orthogonal fault system consisting of NNW and ENE normal faults. These faults have been formed during general uplift behind the orogenic front which has been migrating from western Greece to the Ionian islands. The ENE-trending Rio graben which belongs to his orthogonal system connects the Patras graben to the Corinth graben and has subsequently been active as a transfer fault between them.
Plio-Quaternary geodynamic processes in central continental Greece are quite similar to those earlier processes observed in the central Aegean region which reflect the initial stage of continental break-up behind a migrating orogenic front. 相似文献
6.
Field exposures of Lower Cretaceous strata in the Oliete sub-basin (eastern Spain) allow identification of syn-rift features such as listric and planar normal faults, rotated fault blocks, fault-related folds, sharp thickness variations and wedge-shaped sedimentary geometries, as well as intra-rift angular unconformities defined by the erosive truncation of rotated fault blocks and the onlap of upper units. The combined use of both stratigraphic and extensional tectonic features at the outcrop scale has allowed us to characterise different syn-sedimentary tectonic events and their correlation between the footwall and the hangingwall block of the major extensional Gargallo fault. Such events have been interpreted as induced by the major Gargallo fault activity, and they are the basis for proposing a polyphase evolutionary model for this master fault. Data indicate that the deformation tends not to be concentrated on the major fault; instead, it is distributed over a wide area. We interpret that both the interlayered detachment levels in the pre-rift (especially the Late Triassic Keuper Facies) and syn-rift series, together with the rheology of the sedimentary pile, play an important role in transmitting deformation from master faults to hangingwall and footwall blocks. 相似文献
7.
In this work, we explore by means of analogue models how different basin-bounding fault geometries and thickness of a viscous layer within the otherwise brittle pre-rift sequence influence the deformation and sedimentary patterns of basins related to extension. The experimental device consists of a rigid wooden basement in the footwall to simulate a listric fault. The hangingwall consists of a sequence of pre-rift deposits, including the shallow interlayered viscous layer, and a syn-rift sequence deposited at constant intervals during extension. Two different geometries exist of listric normal faults, dip at 30 and 60° at surface. This imposes different geometries in the hangingwall anticlines and their associated sedimentary basins. A strong contrast exists between models with and without a viscous layer. With a viscous décollement, areas near the main basement fault show a wide normal drag and the hangingwall basin is gently synclinal, with dips in the fault side progressively shallowing upwards. A secondary roll-over structure appears in some of the models. Other structures are: (1) reverse faults dipping steeply towards the main fault, (2) antithetic faults in the footwall, appearing only in models with the 30° dipping fault and silicone-level thicknesses of 1 and 1.5 cm and (3) listric normal faults linked to the termination of the detachment level opposite to the main fault, with significant thickness changes in the syn-tectonic units. The experiments demonstrate the importance of detachment level in conditioning the geometry of extensional sedimentary basins and the possibility of syncline basin geometries associated with a main basement fault. Comparison with several basins with half-graben geometries containing a mid-level décollement supports the experimental results and constrains their interpretation. 相似文献
8.
Structural evolution of a gravitationally detached normal fault array: analysis of 3D seismic data from the Ceduna Sub‐Basin,Great Australian Bight 
下载免费PDF全文
下载免费PDF全文 The growth, interaction and controls on normal fault systems developed within stacked delta systems at extensional delta‐top settings have not been extensively examined. We aim to analyse the kinematic, spatial and temporal growth of a Cretaceous aged, thin‐skinned, listric fault system in order to further the understanding of how gravity‐driven fault segments and fault systems develop and interact at an extensional delta‐top setting. Furthermore, we aim to explore the influence of a pre‐existing structural framework on the development of gravity‐driven normal faults through the examination of two overlapping, spatially and temporally distinct delta systems. To do this, we use three‐dimensional (3D) seismic reflection data from the central Ceduna Sub‐basin, offshore southern Australia. The seismic reflection data images a Cenomanian‐Santonian fault system, and a post‐Santonian fault system, which are dip‐linked through an intervening Turonian‐early Campanian section. Both of these fault systems contain four hard‐linked strike assemblages oriented NW–SE (127–307), each composed of 13 major fault segments. The Cenomanian‐Santonian fault system detaches at the base of a shale interval of late Albian age, and is characterised by kilometre‐scale growth faults in the Cenomanian‐Sanontian interval. The post‐Santonian fault system nucleated in vertical isolation from the Cenomanian‐Santonian fault system. This is evident through displacement minima observed at Turonian‐early Campanian levels, which is indicative of vertical segmentation and eventual hard dip‐linkage. Our analysis constrains fault growth into four major evolutionary stages: (1) early Cenomanian nucleation and growth of fault segments, resulting from gravitational instability, and with faults detaching on the lower Albian interval; (2) Santonian cessation of growth for the majority of faults; (3) erosional truncation of fault upper tips coincident with the continental breakup of Australia and Antarctica (ca. 83 Ma); (4) Campanian‐Maastrichtian reactivation of the underlying Cenomanian‐Santonian fault system, inducing the nucleation, growth and consequential dip‐linkage of the post‐Santonian fault system with the underlying fault system. Our results highlight the along‐strike linkage of fault segments and the interaction through dip‐linkage and fault reactivation, between two overlapping, spatially and temporally independent delta systems of Cenomanian and late Santonian‐Maastrichtian age in the frontier Ceduna Sub‐Basin. This study has implications regarding the growth of normal fault assemblages, through vertical and lateral segment linkage, for other stacked delta systems (such as the Gulf of Mexico) where upper delta systems develop over a pre‐existing structural framework. 相似文献
9.
《Basin Research》2018,30(5):1042-1073
The Late Triassic outcrops on southern Edgeøya, East Svalbard, allow a multiscale study of syn‐sedimentary listric growth faults located in the prodelta region of a regional prograding system. At least three hierarchical orders of growth faults have been recognized, each showing different deformation mechanisms, styles and stratigraphic locations of the associated detachment interval. The faults, characterized by mutually influencing deformation envelopes over space‐time, generally show SW‐ to SE‐dipping directions, indicating a counter‐regional trend with respect to the inferred W‐NW directed progradation of the associated delta system. The down‐dip movement is accommodated by polyphase deformation, with the different fault architectural elements recording a time‐dependent transition from fluidal‐hydroplastic to ductile‐brittle deformation, which is also conceptually scale‐dependent, from the smaller‐ (3rd order) to the larger‐scale (1st order) end‐member faults respectively. A shift from distributed strain to strain localization towards the fault cores is observed at the meso to microscale (<1 mm), and in the variation in petrophysical parameters of the litho‐structural facies across and along the fault envelope, with bulk porosity, density, pore size and microcrack intensity varying accordingly to deformation and reworking intensity of inherited structural fabrics. The second‐ and third‐order listric fault nucleation points appear to be located above blind fault tip‐related monoclines involving cemented organic shales. Close to planar, through‐going, first‐order faults cut across this boundary, eventually connecting with other favourable lower‐hierarchy fault to create seismic‐scale fault zones similar to those imaged in the nearby offshore areas. The inferred large‐scale driving mechanisms for the first‐order faults are related to the combined effect of tectonic reactivation of deeper Palaeozoic structures in a far field stress regime due to the Uralide orogeny, and differential compaction associated with increased sand sedimentary input in a fine‐grained, water‐saturated, low‐accommodation, prodeltaic depositional environment. In synergy to this large‐scale picture, small‐scale causative factors favouring second‐ and third‐order faulting seem to be related to mechanical‐rheological instabilities related to localized shallow diagenesis and liquidization fronts. 相似文献
10.
秦岭北麓断裂带晚第四纪活动的地貌表现 总被引：3，自引：0，他引：3
本区地貌特征反映秦岭北麓断裂带的活动特点是：①第四纪以来主要发生垂直运动，其活动性质与程度有差异性、阶段性。第一、二级阶地的形态和年代资料表征秦岭北麓断裂带晚更新世和全新世垂直位错幅度和平均速率。②河流阶地在上升盘出口处高度大，而向上游逐渐减小，反映第四纪以来，秦岭断块山地继续发生由北向南的掀斜运动。③被断层切割的冲洪积扇体的结构和堆积层的产状特征，反映出山麓带多发育铲形断层。 相似文献
11.
Reflection seismic data show that the late Cenozoic Safford Basin in the Basin and Range of south-eastern Arizona, is a 4.5-km-deep, NW-trending, SW-dipping half graben composed of middle Miocene to upper Pliocene sediments, separated by a late Miocene sequence boundary into lower and upper basin-fill sequences. Extension during lower basin-fill deposition was accommodated along an E-dipping range-bounding fault comprising a secondary breakaway zone along the north-east flank of the Pinaleño Mountains core complex. This fault was a listric detachment fault, active throughout the mid-Tertiary and late Cenozoic, or a younger fault splay that cut or merged with the detachment fault. Most extension in the basin was accommodated by slip on the range-bounding fault, although episodic movement along antithetic faults temporarily created a symmetric graben. Upper-plate movement over bends in the range-bounding fault created rollover structures in the basin fill and affected deposition within the half graben. Rapid periods of subsidence relative to sedimentation during lower basin-fill deposition created thick, laterally extensive lacustrine or alluvial plain deposits, and restricted proximal alluvian-fan deposits to the basin margins. A period of rapid extension and subsidence relative to sediment influx, or steepening of the upper segment of the range-bounding fault at the start of upper basin-fill deposition resulted in a large downwarp over a major fault bend. Sedimentation was restricted to this downwarp until filled. Episodic subsidence during upper basin-fill deposition caused widespread interbedding of lacustrine and fluvial deposits. Northeastward tilting along the south-western flank of the basin and north-eastward migration of the depocentre during later periods of upper basin-fill deposition suggest decreased extension rates relative to late-stage core complex uplift. 相似文献
12.
The Central Graben in the Danish North Sea sector consists of a series of N–S to NW–SE trending, eastward‐tilted half‐grabens, bound to the east by the Coffee Soil Fault zone. This fault zone has a complex Jurassic history that encompasses at least two fault populations; N–S to NNW–SSE striking faults active in the Late Aalenian–Early Oxfordian, and NNW–SSE to WNW–ESE striking faults forming in Late Kimmeridgian time (sensu gallico), following a short period of tectonic quiescence. Sediment transport across the Coffee Soil Fault zone was controlled by fault array evolution, and in particular the development of relay ramps that formed potential entry points for antecedent drainage systems from the Ringkøbing–Fyn High east of the rift. Fault and isochore trends of the Upper Kimmeridgian–Lower Volgian succession in the northeast Danish Central Graben show that accommodation space was initially generated close to several minor, isolated or overlapping faults. Subsidence became focused along a few master faults in the Early Volgian through progressive linkage of selected faults. Seismic time isochore geometries, seismic facies, amplitude trends and well ties indicate the presence of coarse clastic lithologies locally along the fault zone. The deposits probably represent submarine mass flow deposits supplied from footwall degradation and possibly also from the graben hinterland via a relay ramp. The latter source appears to have been cut off as the relay ramp was breached and the footwall block are uplifted. Fault growth and linkage processes thus controlled the spatial and temporal trends of accommodation space generation and sediment supply to the rift basin. 相似文献
13.
Abstract Analogue models are a powerful tool for investigating progressive deformation in extensional fault systems. This paper presents exciting new insights into the progressive evolution of hanging wall structures in listric extensional terranes. Analogue models, scaled to simulate deformation in a sedimentary sequence, were constructed for simple listric and ramp/flat listric extensional detachments. For each detachment geometry homogeneous sand, sand/mica and sand/clay models were used to simulate respectively, deformation of isotropic sediments, of anisotropic sediments and of sedimentary sequences with competency contrasts. Roll-over anticlines with geometrically necessary crestal collapse graben structures are characteristic of the steepening-upwards segments of listric extensional fault systems in all of our models. With progressive deformation, crestal collapse grabens show hanging wall nucleation of new faults. Variations in graben size, amount of fault rotation and throw, are dependent on detachment curvature and amount of extension. Individual faults and associated fault blocks may significantly change shape during extension. Complex and apparently conjugate fault arrays are the result of superposition of successive crestal collapse grabens. Ramp/flat listric extensional fault systems are characterized by a roll-over anticline and a crestal collapse graben system associated with each steepening-upwards segment of the detachment and a ramp zone consisting of a hanging wall syncline and a complex deformation zone with local reverse faults. The roll-over anticlines and crestal collapse graben are similar in geometry to those formed in simple listric extensional systems. The models demonstrate that the geometry of the detachments exerts a fundamental control on the evolution of hanging wall structures. Analysis of particle displacement paths for these experiments provides new insights into the mechanical development of roll-over anticlines. Two general models for deformation above simple listric and ramp/flat listric extensional detachments have been erected. 相似文献
14.
《Basin Research》2018,30(2):237-248
The Neogene section in the northern Taranaki Basin, offshore New Zealand, displays an interaction among prograding clinoforms, listric growth faults formed at the base of slope and mass transport deposits that fill the growth fault depocentres. This study focuses on one of these systems, the Karewa Fault and mass transport deposit (MTD), in order to understand the genetic relationship between the fault and the MTD in its hangingwall depocentre, i.e. did the MTD fill existing accommodation space? Did the MTD trigger growth fault displacement? Or is there some other relationship? Most mass transport deposits are elongate in the transport direction and exhibit a length:width aspect ratio of more than 1. However, the 90 km2 Karewa Fault MTD is at least three times wider than it is long, which is atypical for MTDs reported in the literature, where ~80% have a length:width ratio >1. The transport direction of the MTD is to the WNW, as indicated by the location and internal structure of the compressional toe and the headwall scarp region of the Karewa Fault. The structural and sequence geometries on seismic reflection data indicate the MTD formed during the late stage of growth fault activity, and locally truncates the upper part of the Karewa Fault. The MTD is inferred to have originated by local destabilization of the sediment package overlying the Karewa Fault related to the escape of overpressured fluids along the fault. The resulting MTD was translated locally by only a few kilometres. This unusual cause for an MTD also resulted in its atypical length–width–thickness aspect ratios. 相似文献
15.
ABSTRACT
Panamint Valley, in eastern California, is an extensional basin currently bounded by active, dextral-normal oblique-slip faults. There is considerable debate over the tectonic and topographic evolution of the valley. The least-studied structure, the Ash Hill fault, runs for some 50 km along the valley's western edge, and active strands of the fault continue south into the neighbouring Slate Range. Vertical displacement on the fault is valley-side up, creating topography that conflicts with the gross morphology of the valley itself. We use this topography, along with kinematic and geological markers, to constrain the Quaternary slip rate and orientation of the Ash Hill fault. The fault offsets all but the active channel deposits in the valley, and slickenlines indicate a strike-slip to dip-slip ratio of 3.5:1. An offset volcanic unit dated at 4 Ma provides a minimum slip rate of 0.3±0.1 mm yr−1 , and a long-term strike-slip to dip-slip ratio of 5.2:1. Slip on the fault has warped a palaeolake shoreline within the valley. Simple elastic dislocation modelling of the vertical deformation of the shoreline suggests total fault slip of ≈60 m, valley-side up. The shoreline probably dates to 120–150 ka, implying a late Quaternary slip rate of 0.4–0.5 mm yr−1 . We suggest two possible mechanisms for the apparently anomalous slip behaviour of the Ash Hill fault. The fault may be a listric structure related to the proposed low-angle fault underlying Panamint Valley. Alternatively, the Ash Hill fault is a high-angle fault, implying that the valley is currently bounded by high-angle dextral-slip faults. Lack of detailed subsurface information precludes any knowledge of the true relationships between the presently active faults. 相似文献
Panamint Valley, in eastern California, is an extensional basin currently bounded by active, dextral-normal oblique-slip faults. There is considerable debate over the tectonic and topographic evolution of the valley. The least-studied structure, the Ash Hill fault, runs for some 50 km along the valley's western edge, and active strands of the fault continue south into the neighbouring Slate Range. Vertical displacement on the fault is valley-side up, creating topography that conflicts with the gross morphology of the valley itself. We use this topography, along with kinematic and geological markers, to constrain the Quaternary slip rate and orientation of the Ash Hill fault. The fault offsets all but the active channel deposits in the valley, and slickenlines indicate a strike-slip to dip-slip ratio of 3.5:1. An offset volcanic unit dated at 4 Ma provides a minimum slip rate of 0.3±0.1 mm yr
16.
Tectono‐sedimentary development of early syn‐rift deposits: the Abura Graben,Suez Rift,Egypt 下载免费PDF全文
下载免费PDF全文 The thickness and distribution of early syn‐rift deposits record the evolution of structures accommodating the earliest phases of continental extension. However, our understanding of the detailed tectono‐sedimentary evolution of these deposits is poor, because in the subsurface, they are often deeply buried and below seismic resolution and sparsely sampled by borehole data. Furthermore, early syn‐rift deposits are typically poorly exposed in the field, being buried beneath thick, late syn‐rift and post‐rift deposits. To improve our understanding of the tectono‐sedimentary development of early syn‐rift strata during the initial stages of rifting, we examined quasi‐3D exposures in the Abura Graben, Suez Rift, Egypt. During the earliest stage of extension, forced folding above blind normal fault segments, rather than half‐graben formation adjacent to surface‐breaking faults, controlled rift physiography, accommodation development and the stratigraphic architecture of non‐marine, early syn‐rift deposits. Fluvial systems incised into underlying pre‐rift deposits and were structurally focused in the axis of the embryonic depocentre, which, at this time, was characterized by a fold‐bound syncline rather than a fault‐bound half graben. During this earliest phase of extension, sediment was sourced from the rift shoulder some 3 km to the NE of the depocentre, rather than from the crests of the flanking, intra‐basin extensional forced folds. Fault‐driven subsidence, perhaps augmented by a eustatic sea‐level rise, resulted in basin deepening and the deposition of a series of fluvial‐dominated mouth bars, which, like the preceding fluvial systems, were structurally pinned within the axis of the growing depocentre, which was still bound by extensional forced folds rather than faults. The extensional forced folds were eventually locally breached by surface‐breaking faults, resulting in the establishment of a half graben, basin deepening and the deposition of shallow marine sandstone and fan‐delta conglomerates. Because growth folding and faulting were coeval along‐strike, syn‐rift stratal units deposited at this time show a highly variable along‐strike stratigraphic architecture, locally thinning towards the growth fold but, only a few kilometres along‐strike, thickening towards the surface‐breaking fault. Despite displaying the classic early syn‐rift stratigraphic motif recording net upward‐deepening, extensional forced folding rather than surface faulting played a key role in controlling basin physiography, accommodation development, and syn‐rift stratal architecture and facies development during the early stages of extension. This structural and stratigraphic observations required to make this interpretation are relatively subtle and may go unrecognized in low‐resolution subsurface data sets. 相似文献
17.
The Middle Devonian Kvamshesten Basin in western Norway is a late-orogenic basin situated in the hangingwall of the regional extensional Nordfjord–Sogn Detachment Zone. The basin is folded into a syncline with the axis subparallel to the ductile lineations in the detachment zone. The structural and stratigraphic development of the Kvamshesten Basin indicates that the basin history is more complex than hitherto recognized. The parallelism stated by previous workers between mylonitic lineation below the basin and intrabasinal fold axes is only partly reflected in the configuration of sedimentary units and in the time-relations between deposits on opposing basin margins. The basin shows a pronounced asymmetry in the organization and timing of sedimentary facies units. The present northern basin margin was characterized by bypass or erosion at the earliest stage of basin formation, but was subsequently onlapped and eventually overlain by fanglomerates and sandstones organized in well-defined coarsening-upwards successions. The oldest and thickest depositional units are situated along the present southern basin margin. This as well as onlap relations towards basement at low stratigraphic level indicates a significant component of southwards tilt of the basin floor during the earliest stages of deposition. The inferred south-eastwards tilt was most likely produced by north-westwards extension during early stages of basin formation. Synsedimentary intrabasinal faults show that at high stratigraphic levels, the basin was extending in an E–W as well as a N–S direction. Thus, the basin records an anticlockwise rotation of the syndepositional strain field. In addition, our observations indicate that shortening normal to the extension direction cannot have been both syndepositional and continuous, as suggested by previous authors. Through most of its history, the basin was controlled by a listric, ramp-flat low-angle fault that developed into a scoop shape or was flanked by transfer faults. The basin-controlling fault was rooted in the extensional mylonite zone. Sedimentation was accompanied by formation of a NE- to N-trending extensional rollover fold pair, evidenced by thickness variations in the marginal fan complexes, onlap relations towards basement and the fanning wedge geometry displayed by the Devonian strata. Further E–W extension was accompanied by N–S shortening, resulting in extension-parallel folds and thrusts that mainly post-date the preserved basin stratigraphy. During shortening, conjugate extensional faults were rotated to steeper dips on the flanks of a basin-wide syncline and re-activated as strike-slip faults. The present scoop-shaped, low-angle Dalsfjord fault cross-cut the folded basin and juxtaposed it against the extensional mylonites in the footwall of the Nordfjord–Sogn detachment. Much of this juxtaposition may post-date sedimentation in the preserved parts of the basin. Basinal asymmetry as well as variations in this asymmetry on a regional scale may be explained by the Kvamshesten and other Devonian basins in western Norway developing in a strain regime affected by large-scale sinistral strike-slip subparallel to the Caledonian orogen. 相似文献
18.
The influence of valley aggradation and listric normal faulting on styles of river avulsion: A case study of the Brazos River, Texas, USA 总被引：1，自引：1，他引：0
The Holocene avulsion history of the lower Brazos alluvial valley of east Texas, USA, was studied using 10 drill cores, 26 radiocarbon dates, aerial photos, and a digital elevation model. This study shows that two long-term processes, aggradation and localized valley tilting (along a normal listric fault), are responsible for generating two styles of avulsion. The first process precedes avulsion-by-progradation, while the second process precedes avulsion-by-annexation. As valley aggradation migrated updip over the last 7.5 ka, three regional backstepping avulsions occurred along the lower 140 km of the valley and each generated sizable deposits. A pattern emerges of landward stepping progradational avulsions tracking the locus of valley aggradation and of valley aggradation migrating inland even after the rate of sea level rise diminishes. At the same time, several local nodal avulsions occurred between 50 and 55 km updip of the current highstand shoreline but generated no observable deposits. Geomorphic evidence indicates that, since the late Pleistocene, active movement along a previously undocumented normal listric fault has occurred at the location of the nodal avulsion. These two long-term processes do not operate mutually exclusive of each other to promote avulsions; rather, they operate concurrently. Only aggradation promotes avulsions that affect floodplain alluviation, although the total volume of these deposits comprises a small portion of the valley fill. 相似文献
19.
Aleksandra Smyrak-Sikora Per Terje Osmundsen Alvar Braathen Kei Ogata Ingrid Anell Mark J. Mulrooney Valentin Zuchuat 《Basin Research》2020,32(5):949-978
World-class examples of fault-controlled growth basins with associated syn-kinematic sedimentary fill are developed in Upper Triassic prodelta to delta-front deposits exposed at Kvalpynten, SW Edgeøya in East Svalbard. They are interpreted to have interacted with north-westerly progradation of a regional delta system. The syn-kinematic successions consist of 4 to 5 coarsening-upward units spanning from offshore mudstones to subtidal heterolithic bars and compound tidal dunes, which were blanketed by regional, post-kinematic sandstone sheets deposited as laterally continuous, subaqueous tidal dune fields. The rate of growth faulting is reflected in the distribution of accommodation, which governs sedimentary architecture and stacking patterns within the coarsening-upward units. Fully compartmentalized basins (12, 200–800 m wide and c. 150 m high grabens and half grabens) are characterized by syn-kinematic sedimentary infill. These grabens and half-grabens are separated by 60–150 m high horsts composed of pro-delta to distal delta-front mudstones. Grabens host tabular tidal dunes (sandwaves), whereas half-grabens bound by listric faults (mainly south-dipping) consist of wedge-shaped, rotated strata with erosive boundaries proximal to the uplifted fault block crests. Heterolithic tidal bars (sand ridges) occur in narrow half-grabens, showing migration oblique to the faults, up the dipslope. Structureless sandstone wedges and localized subaqueous slumps that formed in response to collapse of the block crests were only documented in half-grabens. Late-kinematic deposition during the final stages of faulting occurred in partly compartmentalized basins, filled with variably thick sets of continuous sandstone belts (compound tidal dunes). 相似文献