首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 306 毫秒
1.
The Omitiomire copper deposit is a relatively recent discovery in the Pan-African Damara Belt of central Namibia. The deposit is situated in Mesoproterozoic gneisses and amphibolites of the Ekuja Dome overlain by amphibolite-grade metaturbidites of the Southern Zone accretionary prism that formed during northward subduction of the Kalahari Craton below the Congo Craton between ca. 580–520 Ma. Copper mineralisation is confined to an anastomosing system of shallowly-dipping, retrograde mylonitic shear zones within the Ekuja Dome. The shear zones are centred around a lithologically heterogeneous amphibolite-gneiss sequence. Mylonitisation and copper mineralisation are closely associated with the retrogression of particularly amphibolites and the partial or complete replacement of amphibolites by biotite–epidote and biotite–chlorite–epidote schists that host the chalcocite-dominated mineralisation.Deformation and mineralisation in the heterogeneous shear-zone system can be shown to describe a progression. Initial strain localization is confined to lithological (amphibolite-gneiss) contacts and associated quartz veining and fluid flow are preferentially developed around the margins of competent amphibolite units. Fluid infiltration and the retrogression of amphibolites to biotite–epidote schists leads to strain localization into the marginal schists that envelop amphibolites. Further veining and fluid flow are localised into the central parts of amphibolite units leading to the pervasive retrogression to biotite–epidote schists that dominate the central parts of the shear-zone system. Earlier quartz-vein generations appear as isoclinally folded and dismembered ribbons or boudins in mineralised schists. The clearly syntectonic introduction of the copper mineralisation is underlined by the intergrowth of chalcocite with the retrograde assemblages and chalcocite forming part of the mylonitic shear-zone fabric.3D modelling of drillhole data combined with limited surface exposure delineates a shallow east dipping, gently undulating ore body parallel to the regional gneissosity of the Ekuja Dome. The ore body comprises several mineralised lenses varying in thickness from 10 m to > 100 m. Prominent ore shoots are gently doubly plunging to the N and S and parallel to the regionally developed L > S fabric in the gneisses. Kinematic indicators in the mineralised shear zone system point to a top-to-the S sense of shear, parallel to the regional L fabric and parallel to the southverging transport recorded in the structurally overlying prism metasediments.The regional setting of the Omitiomire deposit, kinematics, and retrograde, but high-temperature overprint of original mineral assemblages in the mineralised shear zones indicate deformation and fluid flow during the expulsion of the basement gneisses during N-ward direction subduction of the Kalahari Craton below the Congo Craton. Lithological, geochronological, structural and P–T data suggest numerous similarities and, indeed, correlations between the Omitiomire-style copper mineralisation of the Damara Belt with the large copper deposits hosted by basement gneisses in the Domes Region of the Lufilian Arc in Zambia.  相似文献   

2.
The Macraes deposit (> 10 Moz resource) is a Cretaceous orogenic system hosted in the Hyde-Macraes Shear Zone (HMSZ) which was mineralised under lower greenschist facies during later stages of lower greenschist facies metamorphism of host metasedimentary schists. Gold is encapsulated primarily in sulphides that have replaced silicates in ductile shears that are focussed in micaceous rocks. The shears anastomose around structurally competent lenses, and were enhanced by hydrothermal graphite deposition and alteration of albite to muscovite. In contrast, scheelite with minor auriferous sulphides occurs in multigenerational quartz veins that filled fractures in competent lithologies. Hence, scheelite was deposited coevally with gold, from the same hydrothermal fluid, but in different structural settings from most gold at all scales from millimetres to hundreds of metres. Consequentially, there is weak correlation between Au and W at all scales in the deposit. Multigenerational gold and scheelite mineralisation occurred during progressive deformation in the shear zone in two contrasting structural and mineralogical styles in syn-deformationally weakening gold-bearing micaceous shears, and in syn-deformationally hardened competent rocks that became silicified and veined with quartz and scheelite. Hydrothermal fluid flow in the gold-bearing shears occurred at the grain boundary, microshear, and microfracture scales, and was slow (< 1 m/year), continuous, and pervasive. In contrast, vein formation in more competent lithologies was episodic, locally rapid (> hundreds of m/year), and was controlled by fracture permeability. The Au and W enrichment in the Macraes deposit resulted from regional scale metal mobility, driven by coeval recrystallisation in higher-grade (upper greenschist to amphibolite facies) metamorphism that persisted structurally below the Macraes deposit for at least 10 Ma after mineralisation ceased.  相似文献   

3.
The Niassa Gold Belt, in northernmost Mozambique, is hosted in the Txitonga Group, a Neoproterozoic rift sequence overlying Paleoproterozoic crust of the Congo–Tanzania Craton and deformed during the Pan-African Orogeny. The Txitonga Group is made up of greenschist-facies greywacke and schist and is characterized by bimodal, mainly mafic, magmatism. A zircon U–Pb age for a felsic volcanite dates deposition of the sequence at 714 ± 17 Ma. Gold is mined artisanally from alluvial deposits and primary chalcopyrite-pyrite-bearing quartz veins containing up to 19 ppm Au have been analyzed. In the Cagurué and M’Papa gold fields, dominantly N–S trending quartz veins, hosted in metagabbro and schist, are regarded as tension gashes related to regional strike-slip NE–SW-trending Pan-African shear zones. These gold deposits have been classified as mesozonal and metamorphic in origin. Re–Os isotopic data on sulfides suggest two periods of gold deposition for the Cagurué Gold Field. A coarse-crystalline pyrite–chalcopyrite assemblage yields an imprecise Pan-African age of 483 ± 72 Ma, dating deposition of the quartz veins. Remobilization of early-formed sulfides, particularly chalcopyrite, took place at 112 ± 14 Ma, during Lower Cretaceous Gondwana dispersal. The ～483 Ma assemblage yields a chondritic initial 187Os/188Os ratio of 0.123 ± 0.058. This implies a juvenile source for the ore fluids, possibly involving the hosting Neoproterozoic metagabbro. The Niassa Gold Belt is situated at the eastern end of a SW–NE trending continental-scale lineament defined by the Mwembeshi Shear Zone and the southern end of a NW–SE trending lineament defined by the Rukwa Shear Zone. We offer a review of gold deposits in Zambia and Tanzania associated with these polyphase lineaments and speculate on their interrelation.  相似文献   

4.
The Loulo–Gounkoto complex in the Kédougou–Kéniéba Inlier hosts three multi-million ounce orogenic gold deposits, situated along the Senegal–Mali Shear Zone. This west Malian gold belt represents the largest West African orogenic gold district outside Ghana. The Gounkoto deposit is hosted to the south of the Gara and Yalea gold mines in the Kofi Series metasedimentary rocks. The ore body is structurally controlled and is characterised by sodic and phyllic alteration, As- and Fe-rich ore assemblages, with abundant magnetite, and overall enrichment in Fe–As–Cu–Au–Ag–W–Ni–Co–REE + minor Te–Pb–Se–Cd. Fluid inclusion analysis indicates that the deposit formed at P–T conditions of approximately 1.4 kbar and 340 °C and that two end member fluids were involved in mineralisation: (1) a moderate temperature (315–340 °C), low salinity (< 10 wt.% NaCl equiv.), low density (≤ 1 g·cm− 3), H2O–CO2–NaCl–H2S ± N2–CH4 fluid; (2) a high temperature (up to 445 °C), hypersaline (~ 40 wt.% NaCl equiv.), high density (~ 1.3 g·cm− 3), H2O–CO2–NaCl ± FeCl2 fluid. Partial mixing of these fluids within the Jog Zone at Gounkoto enhanced phase separation in the aqueo-carbonic fluid and acted as a precipitation mechanism for Au. These findings demonstrate the widespread, if heterogeneously distributed, nature of fluid mixing as an ore forming process in the Loulo–Gounkoto complex, operating over at least a 30 km strike length of the shear zone. Stable isotope analyses of ore components at Gounkoto indicate a dominant metamorphic source for H2O, H2S and CO2, and by extension Au. It thus can be reasoned that both the aqueo-carbonic and the hypersaline fluid at Gounkoto are of metamorphic origin and that the high levels of salinity in the brine are likely derived from evaporite dissolution.  相似文献   

5.
Almora Nappe in Uttarakhand, India, is a Lesser Himalayan representative of the Himalayan Metamorphic Belt that was tectonically transported over the Main Central Thrust (MCT) from Higher Himalaya. The Basal Shear zone of Almora Nappe shows complicated structural pattern of polyphase deformation and metamorphism. The rocks exposed along the northern and southern margins of this nappe are highly mylonitized while the degree of mylonitization decreases towards the central part where the rocks eventually grade into unmylonitized metamorphics.Mylonitized rocks near the roof of the Basal Shear zone show dynamic metamorphism (M2) reaching upto greenschist facies (～450 °C/4 kbar). In the central part of nappe the unmylonitized schists and gneisses are affected by regional metamorphism (M1) reaching upper amphibolite facies (～4.0–7.9 kbar and ～500–709 °C). Four zones of regional metamorphism progressing from chlorite–biotite to sillimanite–K-feldspar zone demarcated by specific reaction isograds have been identified. These metamorphic zones show a repetition suggesting that the zones are involved in tight F2 – folding which has affected the metamorphics. South of the Almora town, the regionally metamorphosed rocks have been intruded by Almora Granite (560 ± 20 Ma) resulting in contact metamorphism. The contact metamorphic signatures overprint the regional S2 foliation. It is inferred that the dominant regional metamorphism in Almora Nappe is highly likely to be of pre-Himalayan (Precambrian!) age.  相似文献   

6.
The Pala region, in southwestern Chad, belongs to the northern part of the Central African Pan-African Fold Belt. It is made up of greenschist-facies schists and is characterized by bimodal, mainly mafic, magmatism. This schist unit named Goueigoudoum Series is intruded by pre- to post-tectonic plutonic rocks dated between 737 and 570 Ma and dykes of quartz. Gold is mined artisanally from alluvial deposits and primary chalcopyrite–pyrite-bearing quartz veins, brecciated and silicified zones and shear zones. The majority of the mineralized shear zones and some quartz veins generally trend N–S to NNE–SSW or NW–SE and are interpreted as extensional shear fractures related to regional NE–SW-trending sinistral strike–slip shear zones. The geological context of the Pala region clearly indicates hydrothermal fluids formed along active continental margins during collisional orogenesis, and subsequent associated fluid migration typically occurred during strike–slip events. Although the origin of fluids may be varied (magmatic, metamorphic or meteoric fluids, Proterozoic seawater, or sedimentary basin formation waters), the distribution of the mineralizations along the granitoid intrusions suggests that magmatism played a major role in the dynamics of the mineralizing fluids.  相似文献   

7.
We report for the first time the evidence for prograde high-pressure (HP) metamorphism preceding a peak ultrahigh-temperature (UHT) event in the northernmost part of the Madurai Block in southern India. Mg–Al-rich Grt–Ged rocks from Komateri in Karur district contain poikiloblastic garnet with numerous multi-phase inclusions. Although most of the inclusion assemblages are composed of gedrite, quartz, and secondary biotite, rare staurolite + sapphirine and spinel + quartz are also present. The XMg (=Mg/[Fe+Mg]) of staurolite (0.45–0.49) is almost consistent with that reported previously from Namakkal district in the Palghat–Cauvery Shear Zone system (XMg = 0.51–0.52), north of the Madurai Block. The HP event was followed by peak UHT metamorphism at T = 880–1040 °C and P = 9.8–12.5 kbar as indicated by thermobarometric computations in the Grt–Ged rock and associated mafic granulite. Symplectic intergrowth of spinel (XMg = 0.50–0.59, ZnO < 1.7 wt.%) and quartz, a diagnostic indicator of UHT metamorphism, probably formed by decompression at UHT conditions. The rocks subsequently underwent retrograde metamorphism at T = 720–760 °C and P = 4.2–5.1 kbar. The P–T conditions and clockwise exhumation trajectory of the Komateri rocks, comparable to similar features recorded from the Palghat–Cauvery Shear Zone system, suggest that the Madurai Block and the Palghat–Cauvery Shear Zone system underwent similar HP and UHT metamorphic history probably related to the continent–continent collision during the final stage of amalgamation of Gondwana supercontinent.  相似文献   

8.
High-grade fault-hosted manganese deposits at the Woodie Woodie Mine, East Pilbara, are predominantly hydrothermal in origin with a late supergene overprint. The dominant manganese minerals are pyrolusite, braunite, and cryptomelane. The ore bodies are located on, or near the unconformities between the Neoarchean Carawine Dolomite and the Paleoproterozoic Pinjian Chert breccia (weathering product of Carawine Dolomite), and sedimentary units of the overlying ca 1300–1100 Ma Manganese Group. Stratabound manganese is typically located above or adjacent to steep fault-hosted manganese. The ore bodies range in size from 0.2 to 5.5 Mt with an average of 0.5 Mt. Historically, over 35 Mt of manganese has been mined at Woodie Woodie, and current ore resources are 29.94 Mt at 39.94% Mn, 6.96% Fe (resource and reserves statement, June 2011, Consolidated Minerals Pty Ltd).Manganese mineralization at Woodie Woodie is related to northwest–southeast directed extension and basin formation during the Mesoproterozoic. Basin architecture is generally well preserved and major manganese occurrences are localised along growth faults which down-throw the Pinjian Chert Breccia into local extensional basins. Manganese ore bodies are typically located on steep 2nd and 3rd order structures that extend off the major growth faults. Mineralized structures display a dominant northeast-trend reflecting the direction of maximum dilation during northwest–southeast extension.A paragenetic sequence is identified for the manganese ore at Woodie Woodie, with early hydrothermal braunite–pyrolusite–cryptomelane–todorokite–hausmannite, overprinted by late supergene oxides. Preliminary fluid inclusion studies in quartz crystals intergrown with pyrolusite and cryptomelane indicate that primary and pseudosecondary inclusions display a range of salinities from 1 to 18 eq. wt.% NaCl and trapping temperatures estimated to be from 220º to 290º at 1 kbar pressure.A lead–manganese oxide (coronadite) is common in manganese ores at Woodie Woodie, and Pb-isotope studies of 40 lead-rich ore samples from 16 pits indicate mineralization occurred within an age range of 955–1100 Ma. A mixed source is suggested for the lead, but was predominantly basalts and/or volcanogenic sedimentary units (e.g., Jeerinah Formation) of the ca 2700 Ma Fortescue Group. The typically high Mn:Fe ratios and enrichment in elements such as Pb, As, Cu, Mo, Zn are consistent with a dominantly hydrothermal origin for the manganese at Woodie Woodie. Supergene manganese is distinguished from hypogene manganese by a marked enrichment in REE in the supergene manganese.An early structural framework, established during Neoarchean rifting, provides a major structural control on manganese ore distribution. The Woodie Woodie mine corridor is located in a zone of oblique strike-slip extension on major northwest-trending transform faults and north-trending oblique normal faults. A major transform structure at the southern end of the Woodie Woodie mine corridor (Jewel-Southwest Fault Zone) likely acted as a major fluid conduit for manganese-bearing hydrothermal fluids and this would account for the concentration of significant manganese ore occurrences to the north and south of this structure.  相似文献   

9.
The Yindongpo gold deposit is located in the Weishancheng Au–Ag-dominated polymetallic ore belt in Tongbai Mountains, central China. The ore bodies are stratabound within carbonaceous quartz–sericite schists of the Neoproterozoic Waitoushan Group. The ore-forming process can be divided into three stages, represented by early barren quartz veins, middle polymetallic sulfide veinlets and late quartz–carbonate stockworks, with most ore minerals, such as pyrite, galena, native gold and electrum being formed in the middle stage. The average δ18Owater values changed from 9.7‰ in the early stage, through 4.9‰ in the middle stage, to − 5.9‰ in the late stage, with the δD values ranging between − 65‰ and − 84‰. The δ13CCO2 values of ore fluids are between − 3.7‰ and + 6.7‰, with an average of 1.1‰. The H–O–C isotope systematics indicate that the ore fluids forming the Yindongpo gold deposit were probably initially sourced from a process of metamorphic devolatilization, and with time gradually mixed with meteoric water. The δ34S values range from − 0.3‰ to + 5.2‰, with peaks ranging from + 1‰ to + 4‰. Fourteen sulfide samples yield 206Pb/204Pb values of 16.990–17.216, 207Pb/204Pb of 15.419–15.612 and208Pb/204Pb of 38.251–38.861. Both S and Pb isotope ratios are similar to those of the main lithologies of the Waitoushan Group, but differ from other lithologic units and granitic batholiths in the Tongbai area, which suggest that the ore metals and fluids originated from the Waitoushan Group. The available K–Ar and 40Ar/39Ar ages indicate that the ore-forming process mainly took place in the period of 176–140 Ma, during the transition from collisional compression to extension and after the closure of the oceanic seaway in the Qinling Orogen. The Yindongpo gold deposit is interpreted as a stratabound orogenic-style gold system formed during the transition phase from collisional compression to extension.The ore metals in the Waitoushan Group were extracted, transported and then accumulated in the carbonaceous sericite schist layer. The carbonaceous sericite schist layer, especially at the junction of collapsed anticline axis and fault structures, became the most favorable locus for the ore bodies.  相似文献   

10.
The Mercara Shear Zone is sandwiched between the Western Dharwar Craton and the Coorg Block in the Southern Granulite Terrain of India, and is marked by steep gravity gradients interpreted to suggest the presence of underplated high-density material in the lower crust. Here we present geological, petrological and geochemical data, together with zircon U–Pb ages and Lu–Hf isotopes from a suite of metaigneous (TTG-related gneisses, charnockite, metagabbro, mafic granulite) and metasedimentary (quartz mica schist, khondalite, garnet biotite gneiss, kyanite–sillimanite bearing metapelite) rocks from this zone. Geochemical data on the magmatic suite suggests formation through subduction-related arc magmatism, whereas the metasediments represent volcano-sedimentary trench sequences. Phase equilibrium modeling of mafic granulites from the Mercara Shear Zone suggests P–T range of 10–12 kbar at 700 °C to 900 °C. The zircon data yield weighted mean 207Pb/206Pb ages of 3229 ± 80 Ma for metagabbro, 3168 ± 25 Ma for the charnockite, and 3181 ± 20 Ma for the mafic granulite. Ages ranging from 3248 ± 28 Ma to 3506 ± 26 Ma were obtained from zircons in the kyanite/sillimanite bearing metapelite, 3335 ± 44 Ma from khondalite, 3135 ± 14 Ma from garnet biotite gneiss, 3145 ± 17 Ma to 3292 ± 57 Ma from quartz mica schist and 3153 ± 15 Ma to 3252 ± 36 from TTG gneiss. The tightly defined ages of 3.1 to 3.2 Ga from igneous zircons in the magmatic suite suggest prominent Mesoarchean convergent margin magmatism. The timing of high grade metamorphism as constrained from metamorphic overgrowths in zircons is ca. 3.0 Ga which might mark the collisional event between the Western Dharwar Craton and the Coorg Block. Hf isotope features suggest magma derivation mostly from juvenile sources and the Lu–Hf model ages indicate that the crust building might have also involved partial recycling of basement rocks as old as ca. 3.8 Ga. Our study defines the Mercara Shear Zone as a terrane boundary, and possible Mesoarchean suture along which the Coorg Block was accreted to the Western Dharwar Craton. The accretion of these continental fragments might have coincided with the birth of the oldest supercontinent “Ur”.  相似文献   

11.
Abra is a blind, sedimentary rock-hosted polymetallic Fe–Pb–Zn–Ba–Cu ± Au ± Ag ± Bi ± W deposit, discovered in 1981, located within the easterly trending Jillawarra rift sub-basin of the Mesoproterozoic Edmund Basin, Capricorn Orogen, Western Australia. The Edmund Basin contains a 4–10 km thick succession of siltstone, sandstone, dolomitic siltstone, and stromatolitic dolomite. The age of the Edmund Group is between 1.66 and 1.46 Ga. The Abra polymetallic deposit is hosted in siltstone, dolostone, sandstone and conglomerate of the Irregully and Kiangi Creek Formations, but the mineralised zones do not extend above an erosion surface marking the change from fluvial to marine facies in the lower part of the Kiangi Creek Formation. The Abra deposit is characterised by a funnel-shaped brecciated zone, interpreted as a feeder pipe, overlain by stratiform–stratabound mineralisation. The stratiform–stratabound mineralisation includes a Red Zone and an underlying Black Zone. The Red Zone is characterised by banded jaspilite, hematite, galena, pyrite, quartz, barite, and siderite. The jaspilite and hematite cause the predominant red colouration. The Black Zone consists of veins and rhythmically banded sulphides, laminated and/or brecciated hematite, magnetite, Fe-rich carbonate and scheelite. In both zones, laminations and bands of sulphide minerals, Fe oxides, barite and quartz commonly exhibit colloform textures. The feeder pipe (Stringer Zone) merges with Black Zone and consists of a stockwork of Fe-carbonate-quartz, barite, pyrite, magnetite and chalcopyrite, exhibiting fluidised and/or jigsaw textures.The Abra mineral system is characterised by several overprinting phases of hydrothermal activity, from several stages of brecciation and fluidisation, barite and sulphide veining to barren low-temperature chalcedonic (epithermal regime) veining. Hydrothermal alteration minerals include multi-stage quartz, chlorite, prehnite, Fe-rich carbonate and albite. Albite (Na metasomatism) is an early alteration phase, whereas Fe-rich carbonate is a late phase. Fluid inclusion studies indicate that the ore fluids had temperatures ranging from 162 to 250 °C, with salinities ranging from 5.8 to about 20 wt.% NaCl. In the course of our studies, microthermometric and Raman microprobe analyses were performed on fluid inclusions in carbonate, quartz and barite grains. Fluid inclusions in quartz show homogenisation temperatures ranging from 150 to 170 °C with calculated salinities of between 3.7 and 13.8 wt.% NaCl.The sulphur isotopic system shows δ34S values ranging from 19.4 to 26.6‰ for sulphides and from 37.4 to 41.9‰ for barite (Vogt and Stumpfl, 1987, Austen, 2007). Sulphur isotope thermometry between sulphides and sulphide–barite pairs yields values ranging from 219 to 336 °C (Austen, 2007).Galena samples were analysed for Pb isotope ratios, which have been compared with previous Pb isotopic data. The new Pb isotope systematics show model ages of 1650–1628 Ma, consistent with the formation of the host Edmund Basin.Re–Os dating of euhedral pyrite from the Black Zone yielded an age of ~ 1255 Ma. This age corresponds to the 1320–1170 Ma Mutherbukin tectonic event in the Gascoyne Complex. This event is manifested primarily along a WNW-trending structural corridor of amphibolite facies rocks, about 250 km to the northwest of the Abra area. It is possible that the Re–Os age represents a younger re-activation event of an earlier SEDEX style system with a possible age range of 1640–1590 Ma.A genetic model for Abra is proposed based on the above data. The model involves two end-members ore-forming stages: the first is the formation of the SEDEX style mineral systems, followed by a second multi-phase stage during which there was repeated re-working of the mineral system, guided by seismic activity along major regional faults.  相似文献   

12.
The Bajgan Complex, one of the basement constituents of the arc massif in Iranian Makran forms a rugged, deeply incised terrain. The complex consists of pelitic schists with minor psammitic and basic schists, calc silicate rocks, amphibolites, marbles, metavolcanosediments, mafic and felsic intrusives as well as ultramafic rocks. Metapelitic rocks show an amphibolite facies regional metamorphism and contain garnet, biotite, white mica, quartz, albite ± rutile ± apatite. Thermobarometry of garnet schist yields pressure of more than 9 kbar and temperatures between 560 and 675 °C. The geothermal gradient obtained for the peak of regional metamorphism is 19 °C/km, corresponding to a depth of ca. 31 km. Replacement of garnet by chlorite and epidote suggest greenschist facies metamorphism due to a decrease in temperature and pressure through exhumation and retrograde metamorphism (370–450 °C and 3–6 kbar). The metapelitic rocks followed a ‘clockwise’ P–T path during metamorphism, consistent with thermal decline following tectonic thickening. The formation of medium-pressure metamorphic rocks is related to presence of active subduction of the Neotethys Oceanic lithosphere beneath Eurasia in the Makran.  相似文献   

13.
The Tasiast gold deposits are hosted within Mesoarchean rocks of the Aouéouat greenstone belt, Mauritania. The Tasiast Mine consists of two deposits hosted within distinctly different rock types, both situated within the hanging wall of the west-vergent Tasiast thrust. The Piment deposits are hosted within metasedimentary rocks including metaturbidites and banded iron formation where the main mineral association consists of magnetite-quartz-pyrrhotite ± actinolite ± garnet ± biotite. Gold is associated with silica flooding and sulphide replacement of magnetite in the turbidites and in the banded iron formation units. The West Branch deposit is hosted within meta-igneous rocks, mainly diorites and quartz diorites that lie stratigraphically below host rocks of the Piment deposits. Most of the gold mineralisation at West Branch is hosted by quartz–carbonate veins within the sheared and hydrothermally altered meta-diorites that constitute the Greenschist Zone. At Tasiast, gold mineralisation has been defined over a strike length > 10 km and to vertical depths of 740 m. All of the significant mineralised bodies defined to date dip moderately to steeply (45° to 70°) to the east and have a south–southeasterly plunge. Gold deposits on the Tasiast trend are associated with second order shear zones that are splays cutting the hanging wall block of the Tasiast thrust. An age of 2839 ± 36 Ma obtained from the hydrothermal overgrowth on zircons from a quartz vein is interpreted to represent the age of mineralisation.  相似文献   

14.
The Kapalagulu layered ultramafic and mafic intrusion is emplaced between the Paleoproterozoic Ubendian basement and overlying Neoproterozoic Itiaso Group metasedimentary rocks, located near the western shore of Lake Tanganyika. High-grade platinum group element (PGE) mineralization (1–6 g/t Pt + Pd + Au) is associated with chromitite and sulfide-bearing harzburgite within the southeastern extension of the intrusion, known as the Lubalisi Zone, which is covered by a layer of nickel-rich (0.2–2%Ni) laterite regolith that contains linear areas of PGE mineralization.In the Lubalisi Zone, the mineralization may be divided into several significant geometallurgical domains: (a) high-grade PGE mineralization (1–6 g/t Pt + Pd + Au) associated with stratiform PGE reefs and chromitite seams within a harzburgite unit; (b) high-grade PGE mineralization (up to 12 g/t Pt + Pd + Au) associated with small bodies and veins of nickel massive sulfide within harzburgite below PGE-bearing reefs and chromitite seams; (c) low-grade PGE mineralization (0.1–0.5 g/t Pt + Pd + Au) associated with a sulfide-mineralized harzburgite unit above the PGE-bearing reefs; (d) laterite style residual PGE mineralization (0.2–4 g/t Pt + Pd + Au) associated with chromite concentrations in the saprolite and overlying red clay horizons of the laterite regolith; and (e) supergene Ni associated with the saprock and overlying saprolite clay.Mineralogical study of three samples from the PGE reef consisting of high grade PGE chromitite and harzburgite indicate that this mineralization will give a good metallurgical response to conventional grinding and floatation due to the relatively coarse-grained nature of the PGM (P80 from ∼37 to 52 µm), association with base metal sulfides, and unaltered gangue minerals (Wilhelmij and Cabri, 2016). In contrast, mineralogical and metallurgical study of the Ni and PGE mineralized laterite indicate that it cannot be processed using conventional mineral processing techniques but that a hydrometallurgical route should be used to recover the base and precious metals. Because any process is very much deposit-controlled, significant metallurgical and geometallurgical testing of mineralized samples, as well as pilot plant testing, will be required to arrive at feasibility studies.  相似文献   

15.
Petrographic studies of Zn-Pb ore zones hosted by Lower Carboniferous dolomitized Waulsortian reef limestones in the Rathdowney Trend reveal a paragenetic association between sphalerite and potassium silicates: (Ba, K)-feldspar, adularia, and albite as well as rare quartz, illite and phengite. The dominant mineral assemblage is composed of 1) sphalerite ± (K,Ba) feldspar ± pengite/illite near the putative feeder conduit for the Lisheen Main Zone, and 2) a sphalerite ± pengite/illite assemblage distal to the major normal faults (NW of Main Zone, Island Zone and Rapla occurrence). In addition, clay minerals have been identified in fault gouges located at the interface between the Waulsortian reef and argillaceous limestone of the Ballysteen Formation. This mineral assemblage has provided additional constraints on the physico-chemical conditions of ore formation (eH, pH, sulfur and metal species). Another implication of the mineral assemblage, is a revision of fluid rock interaction processes, in which mineral solution-precipitation reactions are contributing to the development of hydrothermal breccias, with dolomitic black matrix breccias interpreted as a by-product of massive sulfide precipitation. Additionally, textural studies of the breccias through fractal dimension analysis of fragment geometry extracted from large scale scanning electron microscope element maps (1 cm2 areas or more), indicates the prevalence of chemical brecciation-corrosion processes in the generation of the black matrix breccias. Integration of these new observations allows for comparison of ore forming processes across the Irish Midlands from the perspective of gangue mineralogy and may provide further links with classic Mississippi-type deposits from the mid-continent region of the United States of America.  相似文献   

16.
40Ar/39Ar dating studies have been carried out along the Dangjin Pass transect across the Altyn Strike-Slip Fault (ASSF). The samples gave ages of 445.2–454.3 Ma in the Northern Belt, 164.3–178.4 Ma in the Mesozoic Shear Zone and 26.3–36.4 Ma in the Cenozoic Shear Zone. Using the piercing point of the Bashikaogong Fault and the Cangma-Heihe Fault an offset of 350–400 km along the ASSF has been estimated. The 40Ar/39Ar dating of the syntectonic-growth or syntectonic-resetting minerals from the samples within the ASSF belt, and offset estimations from different age piercing points suggest that the ASSF should be initiated in the Middle Jurassic (178.4–160 Ma). Combined with previously reported ages, our studies show that the ASSF is characterized by multi-phase re-activation during 85–100, 25-40 and 8–10 Ma following its initiation in the Middle Jurassic in the regional tectonic setting of convergence between the Indian and Eurasian continents.  相似文献   

17.
The island of Seram, eastern Indonesia, experienced a complex Neogene history of multiple metamorphic and deformational events driven by Australia–SE Asia collision. Geological mapping, and structural and petrographic analysis has identified two main phases in the island's tectonic, metamorphic, and magmatic evolution: (1) an initial episode of extreme extension that exhumed hot lherzolites from the subcontinental lithospheric mantle and drove ultrahigh-temperature metamorphism and melting of adjacent continental crust; and (2) subsequent episodes of extensional detachment faulting and strike-slip faulting that further exhumed granulites and mantle rocks across Seram and Ambon. Here we present the results of sixteen 40Ar/39Ar furnace step heating experiments on white mica, biotite, and phlogopite for a suite of twelve rocks that were targeted to further unravel Seram's tectonic and metamorphic history. Despite a wide lithological and structural diversity among the samples, there is a remarkable degree of correlation between the 40Ar/39Ar ages recorded by different rock types situated in different structural settings, recording thermal events at 16 Ma, 5.7 Ma, 4.5 Ma, and 3.4 Ma. These frequently measured ages are defined, in most instances, by two or more 40Ar/39Ar ages that are identical within error. At 16 Ma, a major kyanite-grade metamorphic event affected the Tehoru Formation across western and central Seram, coincident with ultrahigh-temperature metamorphism and melting of granulite-facies rocks comprising the Kobipoto Complex, and the intrusion of lamprophyres. Later, at 5.7 Ma, Kobipoto Complex rocks were exhumed beneath extensional detachment faults on the Kaibobo Peninsula of western Seram, heating and shearing adjacent Tehoru Formation schists to form Taunusa Complex gneisses. Then, at 4.5 Ma, 40Ar/39Ar ages record deformation within the Kawa Shear Zone (central Seram) and overprinting of detachment faults in western Seram. Finally, at 3.4 Ma, Kobipoto Complex migmatites were exhumed on Ambon, at the same time as deformation within the Kawa Shear Zone and further overprinting of detachments in western Seram. These ages support there having been multiple synchronised episodes of high-temperature extension and strike-slip faulting, interpreted to be the result of Western Seram having been ripped off from SE Sulawesi, extended, and dragged east by subduction rollback of the Banda Slab.  相似文献   

18.
The Huoqiu iron ore field in northwest Anhui Province is located in the North China Craton (NCC). As a large banded iron formation (BIF) iron ore field, ore bodies occur in a middle-high grade of Neoarchean metamorphic formation, forming a banded silicon–iron series from north to south. The main ore bodies can be divided into two sub-belts from bottom to upper layers, i.e. the A + B ore belt consisting of leptynite–schist–magnetite–quartz formation, and the D ore belt consisting of schist–marble–hematite–quartz formation. Based on a dataset from geological settings, geophysical and geochemical exploration, ore-forming conditions and structural analysis of the iron deposit, we discuss structural types, sedimentary environments, deep tectonic and ore-controlling factors as well as characteristics and distribution of this colossal BIF ore field in the Huoqiu region.Using LA-ICP-MS techniques, we obtained the oldest U–Pb age of ca. 2.7 Ga for plagioclase amphibolite as its original rock, and 1.8 Ga for magmatic granite in the Huoqiu Group. The Hf isotopes of zircon were also determined, resulting in the oldest Hf model age of 3.5 Ga.Geochemical data indicate that the protolithes of amphibolites belong to a series of subalkaline rocks with enrichments of large ion lithophile elements and depletions of high field strength elements, which are typical volcanic arc rocks. The amphibolites have low K2O concentrations with low ratios of Ti/V (22.7 to 25.9 averaging 24.5), similar to island arc tholeiite. This suggests that the iron deposit and BIF are of the Superior type in the Huoqiu region.  相似文献   

19.
The Bayan Obo Fe–REE–Nb deposit is the world's largest rare earth element (REE) resource and with the increasing focus on critical metal resources has become a focus of global interest. The deposit is hosted in the Palaeoproterozoic Bayan Obo Group, mainly concentrated in the H8 dolomite marble. The ores consist of light REE enriched monazite and bastnäsite, with a wide array of other REE minerals. Niobium mineralisation is hosted primarily in aeschynite and pyrochlore, although there are a wide range of other Nb-minerals. The origin of the host dolomite and ore bodies has been a subject of intense debate. The host dolomite has been proposed to be both of sedimentary origin and an igneous carbonatite. Carbonatite dykes do occur widely in the area, and consideration of the textural, geochemical and isotopic composition of the dolomite suggests an origin via intrusion of magmatic carbonatite into meta-sedimentary marble, accompanied by metasomatism. The origin of the ore bodies is complex, indicated most strongly by an ~ 1 Ga range in radiometric age determinations. Compilation of available data suggests that the ores were originally formed around 1.3 Ga (Sm–Nd isochron ages; Th–Pb ages of zircon), close in time to the intrusion of the carbonatite dykes. The ores were subsequently subjected to several stages of deformation and hydrothermal overprint, culminating in deformation, metamorphism and fluid flow related to the Caledonian subduction of the Mongolian Plate under the North China Craton from ~ 450 to 420 Ma (Th–Pb ages of monazite). This stage resulted in the formation of the strong foliation (‘banding’) of the ore. The presence of undeformed veins with alkali mineral fills, and the overprinting of the foliation by Nb minerals suggest that secondary fluid flow events may also have contributed to the metal endowment of the deposits, as well as remobilising the original Fe and REE mineralisation. The alteration mineralogy and geochemistry of the ores are comparable to those of many REE mineralised carbonatites. Initial Nd isotope ratios at 450 Ma, however, suggest crustal sources for the metals. These conflicting lines of evidence can be reconciled if a (at least) two stage isotopic evolution is accepted for the deposits, with an original mantle-sourced, carbonatite-related metal accumulation forming around 1.3 Ga with εNd close to 0. The ore was remobilised, with associated re-equilibration of Th–Pb isotope systematics during deformation at ~ 450 Ma. A further stage of alkaline hydrothermal fluid was responsible for Nb mineralisation at this stage. The complex geological history, with multiple stages of alkaline, high field strength element-rich, metasomatic fluid flow, is probably the main reason for the exceptional metal endowment of the Bayan Obo area.  相似文献   

20.
The precise constraints on the timing of metamorphism of the Changhai metamorphic complex is of great importance considering the prolonged controversial issue of the north margin and the extension of the Sulu–Dabie HP–UHP Belt. While the monazite U–Th–Pb and muscovite 40Ar/39Ar techniques are widely accepted as two of the most powerful dating tools for revealing the thermal histories of medium–low grade metamorphic rocks and precisely constraining the timing of metamorphism. The Changhai metamorphic complex at the SE Jiao–Liao–Ji Belt, North China Craton consists of a variety of pelitic schist and Grt–Ky-bearing paragneiss, and minor quartzite and marble. Analyses of mineral inclusions and back-scattered electric (BSE) images of monazites, combined with LA–ICP–MS U–Th–Pb ages for monazites and 40Ar/39Ar ages for muscovites, provide evidence of the origin and metamorphic age of the Changhai metamorphic complex. Monazites separates from various Grt–Mus schists and Grt–Ky–St–Mus paragneisses exhibit homogeneous BSE images from cores to rims, and contain inclusion assemblages of Grt + Mus + Qtz ± Ctd ± Ky in schist, and Grt + Ky + St + Mus + Pl + Kfs + Qtz inclusions in paragneiss. These inclusion assemblages are very similar to matrix minerals of host rocks, indicating they are metamorphic rather than inherited or detrital in origin. LA–ICP–MS U–Th–Pb dating reveals that monazites of schist and paragneiss have consistent 206Pb/238U ages ranging from 228.1 ± 3.8 to 218.2 ± 3.7 Ma. In contrast, muscovites from various schists show slightly older 40Ar/39Ar plateau ages of 236.1 ± 1.5 to 230.2 ± 1.2 Ma. These geochronological and petrological data conclude that the pelitic sediments have experienced a metamorphic event at the Mid–Late Triassic (236.1–218.2 Ma) rather than the Paleoproterozoic (1950–1850 Ma), commonly regarded as the Precambrian basement for the Jiao–Liao–Ji Belt. Hence, the Changhai metamorphic complex should be considered as a discrete lithotectonic group.This newly recognized Mid–Late Triassic metamorphic event (236.1–218.2 Ma) for the Changhai metamorphic complex is coeval with the HP–UHP metamorphic event (235–220 Ma) for Sulu–Dabie rocks. This leads us to speculate that the metamorphism of the Changhai complex belt along the SE margin of the North China Craton was genetically related to the Mid–Late Triassic collision of the North China and South China cratons. By the same token, the Sulu–Dabie HP–UHP Belt may have extended through Yantai, and the southern Yellow Sea, and to the southern side of the Changhai metamorphic complex.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号