共查询到20条相似文献，搜索用时 724 毫秒
1.
Most magmatic Ni–Cu–PGE sulphide deposits occur within long-lived magma pathways fed by high degree partial melts of the mantle. Holistic mineral-system analysis for such deposits has some parallels with dominantly hydrothermal systems, but also some important differences.Major provinces are associated with large volumes of magma erupted at margins of ancient Archaean cratons, and are associated with small intrusions through which large volumes of magmas have passed. There is no demonstrable association with any particular magma type, although in most provinces the ores are found associated with the most primitive available magmas, whatever these may be. Ore-bearing intrusions tend to form early in the evolution of the host province, although exceptions exist to this rule, and these intrusions typically account for very small proportions of the volumes of the province as a whole.Ore deposition is favoured by prolonged high-volume flow over a horizontal floor. This floor may take the form of the base of a channelized sill, tube or blade-shaped dyke, which account for most of the known host igneous bodies to significant ore deposits. Deposition mechanisms may be chemical or physical, but large high-grade deposits require a major component of transported sulphide liquid, initially carried as droplets. Late stage migration of sulphide liquid as gravity currents within intrusion networks, coupled with infiltration and melting of floor rocks, accounts for the common observation in mafic intrusion hosted deposits of cross cutting relationships between massive sulphides, host intrusions and country rocks.The following set of criteria is proposed in targeting and evaluating Ni–Cu–PGE sulphide systems: 1) nature of magmatism and relationship to pre-existing cratonic architecture; 2) magmatic and structural controls on the development of protracted-flow magma conduits; 3) access to crustal S sources at some point along the pathway; 4) favourable intrusion geometry and emplacement style for deposition, reworking and upgrading of sulphide magmas, and 5) favourable structural history and erosional level for preservation and detectability.These components can be translated into mappable geological criteria. At the predictive targeting scale, the key features are proximity to ancient cratonic boundaries and long-lived, trans-crustal structures, and relationship to voluminous mafic or ultramafic magmatism typically with high Mg and low Ti contents, but otherwise lacking distinctive characteristics. At the detection scale, there are two distinct approaches: recognition of high volume magma pathways with prolonged flow-through operating at length scales of km based on morphological, petrological, geophysical and structural observations; and identification of the petrographic and geochemical signals of accumulation or extraction of sulphide liquid. 相似文献
2.
寄主岩浆硫化物和氧化物矿床的镁铁质-超镁铁质岩体对比分析与成矿过程评述 总被引：4，自引：2，他引：2
镁铁质-超镁铁质岩体是世界上岩浆硫化物(Ni-Cu-PGE)和氧化物(Fe-Ti-V-P)矿床的主要载体.全球主要岩浆硫化物和氧化物矿床均可以产于大火成岩省、克拉通区的裂谷带或伸展环境、褶皱带内的后碰撞伸展环境.寄主岩浆硫化物矿床的岩体规模相差甚大(从6×104km2到＜0.1km2),既有超镁铁质岩石组合也有镁铁质岩石组合,但其原生岩浆主要为拉斑玄武质岩浆.含镍铜的铂族元素矿床主要赋存于规模很大的层状岩体中,而镍铜硫化物矿床主要赋存于小岩体中.寄主钒钛磁铁矿或磁铁矿矿床的岩体主要是以辉长岩为主的层状杂岩体.寄主钛铁矿-磷灰石矿床的岩体均为层状的斜长岩-纹长二长岩-紫苏花岗岩岩体.尽管其岩石组合相差很大,但其原生岩浆均属拉斑玄武质.寄主硫化物矿床的岩体相对富Si、Mg、Cr、Ni,而寄主氧化物矿床的岩体相对富Fe-Ti-P-V,造岩矿物晶体化学也反映了这种差异.对全球主要含矿岩体的对比分析表明,导致这种反差的主要控制因素应该是岩浆生成时的压力状态,源区性质和熔融程度的差异可能只在局部范围内起作用.对岩浆硫化物矿床成矿过程的认识集中体现在金川模式和岩浆通道模式上,对岩浆氧化物矿床成矿过程的认识体现在氧化物和磷灰石是堆晶相还是从不混溶的矿浆中结晶的.对比分析表明,成矿过程具有多样性,试图用一种模式概括所有同类矿床成矿过程的想法未必可取.毫无疑问,适宜的氧化还原环境是形成岩浆矿床的必要务件,伴随岩浆演化及成矿过程的氧速度变化及其诱因问题尚待进一步探索. 相似文献
3.
Electron microprobe analyses of gold and associated ore minerals as well as stable isotope analyses of sulphide and carbonate minerals were performed in order to determine the metal and fluid sources and temperature of the mineralizing systems to better understand the genesis of the Atud gold deposit hosted in the metagabbro–diorite complex of Gabal Atud (Central Eastern Desert, Egypt). The gold can be classified as electrum (63.6–74.3 wt.% Au and 24.6–26.6 wt.% Ag) and is associated with arsenopyrite and As-bearing pyrite in the main mineralization (gold-sulphides) phase within the main mineralized quartz veins and altered host rocks. Based on the arsenopyrite geothermometer, As-contents (29.3–32.7 atom%) in arsenopyrite point to deposition in the Log ?S2 and T ranges of ?10.5 to ?5.5 and 305–450°C, respectively, during the main mineralizing phase. Based on the δ34S isotopic compositions of the sulphides, they are originated from magmatic fluids in which the sulphur is either sourced directly from magma or remobilized from the magmatic rocks (gabbroic rocks). On the other hand, calcite formed from fluids having mainly magmatic mixed with variable metamorphic signatures based on its δ13C and δ18O values. This work concluded that the gold-bearing ores at Atud deposit have magmatic sources leaching from the country intrusive rocks during water/rock interactions then remobilized during a metamorphic event. Therefore, the Atud gold deposit is classified as an intrusion-related gold deposit, in which the gabbro–diorite host intrusion acted as the source of metals which were mobilized and deposited as a result of the effects of NW–SE shearing. 相似文献
4.
岩浆流体在热液矿床形成中的作用 总被引：12，自引：0，他引：12
岩浆流体在浅部分离为岩浆卤水和蒸汽相 ,CO2 、SO2 的加入将增加不混溶区间。Ag ,Zn ,Pb ,Sn等在高盐度卤水中呈氯化络合物的形式搬运 ,Cu、Au呈I价态的二硫化络合物的形式在富硫的蒸汽相中搬运。岩浆流体与大气水混合的稀释和热效应 ,是导致Sn元素沉淀的主要机制 ,流体混合需要长期稳定的抽送系统 :( 1)对流体界面混合 ;( 2 )两组裂隙处相遇混合。斑岩Cu矿床早期以岩浆流体为主导 ,晚期大气水普遍存在。反应性强、富含金属的岩浆流体从侵入体往外运移并且与主岩反应 ,形成带状分布的蚀变矿物组合。高硫化浅成热液矿床的早期以流体对主岩的广泛淋滤为特征 ,流体呈酸性和氧化性。密度差使得低盐度液体与深处高盐度卤水在空间上分离。低硫化浅成热液矿床的成矿流体呈低盐度、中性pH值和处于还原性、静水压力条件 ,流体沸腾是成矿卸载的主要机制。富Au型矿床与低盐度富气相流体有关 ,富Ag型矿床与较高盐度的流体有关。在热液系统的寿命中 ,导致矿化的流体活动仅在短暂的时期内存在。热液系统之间在岩浆标志上的变异是由于岩浆流体的间歇性贡献或缺失造成的。 相似文献
5.
Platinum-group element (PGE) mineralisation within the Platreef at Overysel is controlled by the presence of base metal sulphides (BMS). The floor rocks at Overysel are Archean basement gneisses, and unlike other localities along the strike of the Platreef where the floor is comprised of Transvaal Supergroup sediments, the intimate PGE–BMS relationship holds strong into the footwall rocks. Decoupling of PGE from BMS is rare and the BMS and platinum-group mineral assemblages in the Platreef and the footwall are almost identical. There is minimal overprinting by hydrothermal fluids; therefore, the mineralisation style present at Overysel may represent the most ‘primary’ style of Platreef mineralisation preserved anywhere along the strike. Chondrite-normalised PGE profiles reveal a progressive fractionation of the PGE with depth into the footwall, with Ir, Ru and Rh dramatically depleted with depth compared to Pt, Pd and Au. This feature is not observed at Sandsloot and Zwartfontein, to the south of Overysel, where the footwall rocks are carbonates. There is evidence from rare earth element abundances and the amount of interstitial quartz towards the base of the Platreef pyroxenites that contamination by a felsic melt derived from partial melting of the gneissic footwall has taken place. Textural evidence in the gneisses suggests that a sulphide liquid percolated down into the footwall through a permeable, inter-granular network that was produced by partial melting around grain boundaries in the gneisses that was induced by the intrusion of the Platreef magma. PGE were originally concentrated within a sulphide liquid in the Platreef magma, and the crystallisation of monosulphide solid solution from the sulphide liquid removed the majority of the IPGE and Rh from it whilst still within the mafic Platreef. Transport of PGE into the gneisses, via downward migration of the residual sulphide liquid, fractionated out the remaining IPGE and Rh in the upper parts of the gneisses leaving a ‘slick’ of disseminated sulphides in the gneiss, with the residual liquid becoming progressively more depleted in these elements relative to Pt, Pd and Au. Highly sulphide-rich zones with massive sulphides formed where ponding of the sulphide liquid occurred due to permeability contrasts in the footwall. This study highlights the fact that there is a fundamental floor rock control on the mechanism of distribution of PGE from the Platreef into the footwall rocks. Where the floor rocks are sediments, fluid activity related to metamorphism, assimilation and later serpentinisation has decoupled PGE from BMS in places, and transport of PGE into the footwall is via hydrothermal fluids. In contrast, where the floor is comprised of anhydrous gneiss, such as at Overysel, there is limited fluid activity and PGE behaviour is controlled by the behaviour of sulphide liquids, producing an intimate PGE–BMS association. Xenoliths and irregular bands of chromitite within the Platreef are described in detail for the first time. These are rich in the IPGE and Rh, and evidence from laurite inclusions indicates they must have crystallised from a PGE-saturated magma. The disturbed and xenolithic nature of the chromitites would suggest they are rip-up clasts, either disturbed by later pulses of Platreef magma in a multi-phase emplacement or transported into the Platreef from a pre-existing source in a deeper staging chamber or conduit. 相似文献
6.
火山成因块状硫化物矿床研究进展 总被引：3，自引：0，他引：3
火山成因块状硫化物（VMS）矿床可形成于太古宙至现代各个地质时期.现代海底热液成矿作用是赋存于海相火山岩系中的古代VMS矿床成矿作用的再现.VMS矿床可形成于多种构造环境,但均与拉张背景有关.按照构造环境和容矿岩系将VMS矿床分为黑矿型、塞浦路斯型、别子型和沙利文型.VMS矿床的热液蚀变由下盘蚀变带和上盘蚀变带两个结构单元组成.下盘蚀变一般有两种类型：（1）不整合的蚀变岩筒,直接产在块状硫化物带的下方;（2）半整合或层控的上盘蚀变带,并可以在区域范围内展布.与下盘蚀变类似,上盘蚀变也具有蚀变岩筒和半整合的蚀变带两种类型.成矿金属主要有两种可能的来源：（1）在岩浆侵入体和浅位岩浆房之上被加热的循环海水对含矿火山岩系及下伏基底物质的淋滤;（2）深部岩浆房挥发分通过释气作用直接释放.下渗的海水是成矿流体的主要来源,同时流体包裹体和稳定同位素资料显示岩浆流体对成矿流体系统亦有较大贡献.VMS矿床具有明显的金属分带现象,其金属序列组合从下至上依次为Fe→Fe-Cu→Cu-Pb-Zn→Pb-Zn-Ba,这种金属分带的演化反应了流体的演化和块状硫化物丘的生长机制.根据成矿流体温度变化而不断演化的4阶段成矿模式可以很好的解释经典丘堆式矿床的形成过程. 相似文献
7.
8.
SW Iberia is interpreted as an accretionary magmatic belt resulting from the collision between the South Portuguese Zone and the autochthonous Iberian terrane in Variscan times (350 to 330 Ma). In the South Portuguese Zone, pull-apart basins were filled with a thick sequence of siliciclastic sediments and bimodal volcanic rocks that host the giant massive sulphides of the Iberian Pyrite Belt. Massive sulphides precipitated in highly efficient geochemical traps where metal-rich but sulphur-depleted fluids of dominant basinal derivation mixed with sulphide-rich modified seawater. Massive sulphides formed either in porous/reactive volcanic rocks by sub-seafloor replacement, or in dark shale by replacement of mud or by exhalation within confined basins with high biogenic activity. Crustal thinning and magma intrusion were responsible for thermal maturation and dehydration of sedimentary rocks, while magmatic fluids probably had a minor influence on the observed geochemical signatures.The Ossa Morena Zone was a coeval calc-alkaline magmatic arc. It was the site for unusual mineralization, particularly magmatic Ni–(Cu) and hydrothermal Fe-oxide–Cu–Au ores (IOCG). Most magmatism and mineralization took place at local extensional zones along first-order strike-slip faults and thrusts. The source of magmas and IOCG and Ni–(Cu) deposits probably lay in a large mafic–ultramafic layered complex intruded along a detachment at the boundary between the upper and lower crust. Here, juvenile melts extensively interacted with low-grade metamorphic rocks, inducing widespread anatexis, magma contamination and further exsolution of hydrothermal fluids. Hypersaline fluids (δ18Ofluid > 5.4‰ to 12‰) were focused upward into thrusts and faults, leading to early magnetite mineralization associated with a high-temperature (> 500 °C) albite–actinolite–salite alteration and subsequent copper–gold-bearing vein mineralization at somewhat lower temperatures. Assimilation of sediments by magmas led in turn to the formation of immiscible sulphide and silicate melts that accumulated in the footwall of the layered igneous complex. Further injection of both basic and sulphide-rich magmas into the upper crust led to the formation of Ni–(Cu)-rich breccia pipes.Younger (330 to 280 Ma?) peraluminous granitoids probably reflect the slow ascent of relatively dry and viscous magmas formed by contact anatexis. These granitoids have W–(Sn)- and Pb–Zn-related mineralization that also shows geochemical evidence of major mantle–crust interaction. Late epithermal Hg–(Cu–Sb) and Pb–Zn–(Ag) mineralization was driven by convective hydrothermal cells resulting from the high geothermal gradients that were set up in the zone by intrusion of the layered igneous complex. In all cases, most of the sulphur seems to have been derived from leaching of the host sedimentary rocks (δ34S = 7‰ to 20‰) with only limited mixing with sulphur of magmatic derivation.The metallogenic characteristics of the two terranes are quite different. In the Ossa Morena Zone, juvenile magmatism played a major role as the source of metals, and controlled the styles of mineralization. In the South Portuguese Zone, magmas only acted as heat sources but seem to have had no major influence as sources of metals and fluids, which are dominated by crustal signatures. Most of the magmatic and tectonic features related to the Variscan subduction and collision seem to be masked by those resulting from transpressional deformation and deep mafic intrusion, which led to the development of a metallogenic belt with little resemblance to other accretionary magmatic arcs. 相似文献
9.
安徽铜陵冬瓜山铜、金矿床两阶段成矿模式 总被引：21，自引：0，他引：21
冬瓜山铜金矿床包括层状硫化物矿体、矽卡岩型和斑岩型矿体。层状硫化物矿体具层状形态和层控特征，矿石具块状、层纹状和揉皱状构造。燕山期岩浆岩及其岩浆流体对层状矿体进行了叠加和改造，改变了其结构构造、矿物组合和矿石成分，并在其上叠加蚀变和矿化。层状矿体中的铜是由含铜流体交代块状硫化物矿石形成的。冬瓜山铜金矿床经历了两次成矿作用：第一成矿阶段．在石炭纪中期，海底喷流作用形成了块状硫化物矿床，矿石成分以硫、铁矿为主；第二成矿阶段。燕山期岩浆侵人，一方面岩浆热液与围岩相互作用发生矽卡岩化、硅化、钾长石化、石英绢云母化和青磐岩化，形成矽卡岩型和斑岩型矿体，另一方面岩浆流体对块状硫化物矿体进行叠加改造，致使块状硫化物矿体富集铜等成矿物质。 相似文献
10.
Geothermal systems ancient and modern: a geochemical review 总被引：1，自引：0，他引：1
Geothermal systems occur in a range of crustal settings. The emphasis of this review is on those occurring in regions of active or recently active volcanism, where magmatic heat at depths up to 8 km leads to convection of groundwater in the upper crust. Hot water (and steam) flows are controlled by the permeability of the crust and recent data have emphasised the dominance of secondary permeability, especially fractures. Drilling to depths of up to 3 km in these systems encounters near-neutral pH alkali chloride waters with temperatures up to about 350°C and chloride contents generally in the range 500 to 15,000 mg kg?1 although much higher salinities are encountered in some systems such as in the Imperial Valley, California. Stable isotope studies indicate the predominance of a meteoric source in the majority of geothermal systems although seawater predominates in some regions, such as Reykjanes, Iceland. Mixing of waters from both sources also occurs in some systems and some magmatic fluid may also be present.The major element geochemistry of geothermal fluids is determined by a set of temperature-dependent mineral-fluid equilibria although chloride and rare gas contents appear to be independent variables reflecting the sources of these components (sedimentary or volcanic rocks, seawater, magmatic fluids, etc).Boiling in the upper portion of geothermal systems is accompanied by the transfer of acidic gases (CO2 and H2S) to the resultant steam which may penetrate the surface as fumarolic activity or become condensed into shallow groundwaters giving rise, with oxidation, to distinctive low pH sulphate bicarbonate water.Fluid inclusion, stable isotope and mineral alteration studies have led to the recognition in many Tertiary hydrothermal ore deposits of physical and chemical environments analogous to those encountered in the present-day systems. The vein-type gold-silver, Carlin-type gold and porphyry-type copper-molybdenum deposits of the western United States are particularly well studied examples. Sub-ocean floor equivalents of the terrestrial geothermal systems have been recognized in ocean floor spreading centres such as the East Pacific Rise and deep-sea submersible vehicles have allowed visual observation of sea floor hot springs actively depositing metal sulphides. These environments may parallel those of the Cyprus-type massive sulphide depositing systems, while sub-sea floor systems of the type responsible for Kuroko-type massive sulphide deposits may eventually be encountered in island are settings. 相似文献
11.
Y ilun D u X inlong Q in C alvin G. B arnes Yi C ao Qian Dong Y angsong D u 《地学前缘(英文版)》2014,5(2):237-248
Sulphide inclusions, which represent melts trapped in the minerals of magmatic rocks and xenoliths, provide important clues to the behaviour of immiscible sulphide liquids during the evolution of magmas and the formation of NieCueFe deposits. We describe sulphide inclusions from unique ultramafic clots within mafic xenoliths, from the mafic xenoliths themselves, and from the three silica-rich host plutons in Tongling, China. For the first time, we are able to propose a general framework model for the evolution of sulphide melts during the evolution of mafic to felsic magmas from the upper mantle to the upper crust. The model improves our understanding of the sulphide melt evolution in upper mantle to upper crust magmas, and provides insight into the formation of stratabound skarn-type FeeCu polymetallic deposits associated with felsic magmatism, thus promising to play an important role during prospecting for such deposits. 相似文献
12.
赵官井田位于山东省的西北部,该区岩浆岩较发育,有三层岩浆岩呈岩床状侵入到煤系地层中。下层岩浆岩一般位于10煤以下,但在井田局部区域,也会上冲至10煤层,甚至达到7煤层,造成冲断条带两侧煤层底板形态发生剧烈变化,10煤或7煤直接吞蚀。依据赵官井田岩浆岩的发育规律及煤岩性特征,利用三维地震勘探方法查明了井田内三层岩浆岩的赋存状态,尤其对下层岩浆侵入形态以及对煤层的影响进行了解释,否定了以往地质资料中因岩浆侵入煤层而误解释为多条逆断层的存在。赵官庄井田三维地震勘探实例表明,岩浆岩冲断煤层在时间剖面上具有典型的响应特征,并指出下层岩浆岩的上冲的影响井田浅部煤层开采的一个重要地质因素。 相似文献
13.
硅酸盐熔体体系中,锌主要赋存于熔体相,部分以类质同象的形式进入铁、镁硅酸盐及铁的氧化物中;流体/熔体相分
离时,锌优先进入流体相;卤水/气相分离时,锌优先进入卤水相;成矿过程中,锌主要进入液相流体中迁移。在热液环境
下, ZnCl2 - nn （0≤n≤4） 络合物是迁移锌的最重要形式,其次游离Zn2+,Zn2+-SO2 -4 络合物,Zn2+OH-络合物,在一定条件下对锌的运移也非常重要,但能与锌络合的其它潜在无机配体,如HS-,CO32-,NH3,F-,Br-, S2 -x 及S2O2 -
3 等,则意义不大。富有机质低温（<200℃） 条件下,部分有机质对锌的迁移也具有重要作用,如,羧酸、氨基酸及腐殖酸,其中羧酸意义最大。在Zn成矿过程中,岩浆-热液Zn矿床矿化可划分为三个阶段,早期岩浆房去气阶段,期后热液阶段,以及晚期岩浆房去气阶段。层控Zn矿床流体主要为盆地卤水,矿化机制主要为伸展背景下的海底热液对流,或者挤压环境下,构造挤压与重力的联合驱动,促使流体向盆地边缘迁移成矿。锌矿物的沉淀主要受热液组成、温度、压力、pH以及Eh等因素控制,地质过程中,围岩蚀变、沸腾作用以及流体混合作用等宏观过程促使上述物理化学因素发生变化,从而制约着锌的沉淀。 相似文献
14.
伊通县放牛沟地区早古生代岩浆演化特征及其与矿产关系 总被引：1，自引：0，他引：1
伊通县放牛沟早古生代岩浆活动较为强烈,其发展演化与放牛沟多金属硫化物矿床关系极为密切。岩浆活动特点是先喷发后侵入,先期形成钙碱系列的火山—沉积岩系,后期为Ⅰ型中酸性岩浆侵入。该矿床既有火山沉积特征,又有后期岩浆热动力改造特点,其形成受控于岛弧构造环境、火山活动形成的矿源层、后期热动力改造等因素。 相似文献
15.
There are two types of temporally and spatially associated intrusions within the Emeishan large igneous province (LIP); namely, small ultramafic subvolcanic sills that host magmatic Cu-Ni-Platinum Group Element (PGE)-bearing sulfide deposits and large mafic layered intrusions that host giant Ti-V magnetite deposits in the Panxi region. However, except for their coeval ages, the genetic relations between the ore-bearing intrusions and extrusive rocks are poorly understood. Phase equilibria analysis (Q-Pl-Ol-Opx-Cpx system) has been carried out to elucidate whether ore-bearing Panzhihua, Xinjie and Limahe intrusions are co-magmatic with the picrites and flood basalts (including high-Ti, low-Ti and alkali basalts), respectively. In this system, the parental magma can be classified as silica-undersaturated olivine basalt and silica-saturated tholeiite. The equivalents of the parental magma of the Xinjie and Limahe peridotites and picrites and low-Ti basalts are silica-undersaturated, whereas the Limahe gabbro-diorites and high-Ti basalts are silica-saturated. In contrast, the Panzhihua intrusion appears to be alkali character. Phase equilibria relations clearly show that the magmas that formed the Panzhihua intrusion and high-Ti basalts cannot be co-magmatic as there is no way to derive one liquid from another by fractional crystallization. On the other hand, the Panzhihua intrusion appears to be related to Permian alkali intrusions in the region, but does not appear to be related to the alkali basalts recognized in the Longzhoushan lava stratigraphy. Comparably, the Limahe intrusion appears to be a genetic relation to the picrites, whereas the Xinjie intrusion may be genetically related to be low-Ti basalts. Additionally, the gabbro-diorites and peridotites of the Limahe intrusion are not co-magmatic, and the former appears to be derived liquid from high-Ti basalts. 相似文献
16.
新街镁铁—超镁铁侵入体的铂族元素地球化学特征 总被引：12，自引：0，他引：12
采用镍硫试金预处理中子活化分析方法,系统测定了新街层状侵入体镁铁－超镁铁岩和与其有成因联系的玄武岩及正长岩的铂族元素含量,探讨了岩浆作用过程中铂族元素的地球化学行为。结果表明,新街岩体的铂元素分异特征与布什维尔德等铁质超镁铁岩相似,而明显不同于科马提岩和阿尔卑斯型橄榄岩,二叠系峨眉山玄武岩的铂族元素分异特征与新街岩体相似,再次证实二者为同源岩浆分异产物。 相似文献
17.
18.
Dedong Li Yuwang Wang Jingbin Wang Zhaohua Luo Jiulong Zhou Zongfeng Yang Cui Liu 《地学前缘(英文版)》2012,3(5):717-728
According to the metallogenic theory by transmagmatic fluid(TMF).one magmalic intrusion is a channel of ore-bearing fluids,but not their source.Therefore,it is possible to use TMF’s ability for injection into and for escaping from the magmatic intrusion to evaluate its ore-forming potential.As the ore-bearing fluids cannot effectively inject into the magmatic intrusion when the magma fully crystallized, the cooling time and rates viscosity varied can be used to estimate the minimum critical thickness of the intrusion.One dimensional heat transfer model is used to determine the cooling time for three representative dikes of different composition(granite porphyry,quartz diorite and diabase) in the Shihu gold deposit.It also estimated the rates viscosity varied in these lime interval.We took the thickness of dike at the intersection of the cooling time—thickness curve and the rates viscosity varied versus thickness curve as the minimum critical thickness.For the ore-bearing fluids effectively injecting into the magma,the minimum critical thicknesses for the three representative dikes are 33.45 m for granite porphyry,8.22 m for quartz diorite and 1.02 m for diabase,indicating that ore-bearing dikes must be thicker than each value.These results are consistent with the occurrence of ore bodies,and thus they could be applied in practice.Based on the statistical relationship between the length and the width of dikes.these critical thicknesses are used to compute critical areas:0.0003—0.0016 km~2 for diabase. 0.014—0.068 km~2 for quartz diorite and 0.011—0.034 km~2 for granite porphyry.This implies that orebearing minor intrusions have varied areas corresponding to their composition.The numerical simulation has provided the theoretical threshold of exposed thickness and area of the ore-bearing intrusion.These values can be used to determine the ore-forming potentials of dikes. 相似文献
19.
Zhou Taofa Wu Mingan Fan Yu Duan Chao Yuan Feng Zhang Lejun Liu Jun Qian Bing Franco Pirajno David R. Cooke 《Ore Geology Reviews》2011,43(1):154-169
The Middle-Lower Yangtze (Changjiang) River Valley metallogenic belt is located on the northern margin of the Yangtze Craton of eastern China. Most polymetallic deposits in the Changjiang metallogenic belt are clustered in seven districts where magmatism of Mesozoic age (Yanshanian tectono-thermal event) is particularly extensive. From west to east these districts are: E-dong, Jiu-Rui, Anqing-Guichi, Lu-Zong, Tong-Ling, Ning-Wu and Ning-Zhen. World-class iron ore deposits occur in the Lu-Zong and Ning-Wu ore clusters, which are mainly located in continental fault-bound volcanic-sedimentary basins. One of these deposits is the Longqiao iron deposit, discovered in the northern part of the Lu-Zong Basin in 1985. This deposit consists of a single stratabound and stratiform orebody, hosted in sedimentary carbonate rocks of the Triassic Dongma'anshan Formation. A syenite pluton (Longqiao intrusion) is situated below the deposit. The iron ore is massive and disseminated and the ore minerals are mainly magnetite and minor pyrite. Wall rock alteration mostly consists of skarn minerals, such as diopside, garnet, potassic feldspar, quartz, chlorite, phlogopite and anhydrite. Thin sedimentary siderite beds of Triassic age occur as relict laminated ore at the top and the margin of the magnetite orebody. These sideritic laminae are part of Triassic evaporite-bearing carbonate deposits (Dongma'anshan Formation).Sulfur isotopic compositions show that the sulfur in the deposit was derived from a mixture of magmatic hydrothermal fluids and carbonate–evaporite host rocks. Similarly, the C and O isotopic compositions of limestones from the Dongma'anshan Formation indicate that these rocks interacted with magmatic hydrothermal fluids. The O isotopic compositions of the syenitic rocks and minerals from the deposit show that the hydrothermal magnetite and skarn minerals were formed from magmatic fluids. The Pb isotopic compositions of sulfides are similar to those of the Longqiao syenite. Phlogopite coexisting with magnetite in the magnetite ores yielded a plateau age of 130.5 ± 1.1 Ma (2σ), whereas the LA-ICP MS age of the syenite intrusion is 131.1 ± 1.5 Ma, which is slightly older than the age of phlogopite.The Longqiao syenite intrusion may have crystallized from a parental alkaline magma, generated by partial melting of lithospheric mantle, during extensional tectonics. The ore fluids were probably first derived from magma at depth, later emplaced in the sedimentary rocks of the Dongma'anshan Formation, where it interacted with siderite and evaporite-bearing carbonate strata, resulting in the formation of magnetite and skarn minerals. The Longqiao iron deposit is a skarn-type stratabound and stratiform mineral system, genetically and temporally related to the Longqiao syenite intrusion. The Longqiao syenite is part of the widespread Mesozoic intracontinental magmatism (Yanshanian event) in eastern China, which has been linked to lithospheric delamination and asthenospheric upwelling. 相似文献
20.
Deformation structures in the wall rocks of igneous intrusions emplaced at shallow crustal depths preserve an important record of how space was created for magma in the host rocks. Trachyte Mesa, a small Oligocene age intrusion in the Henry Mountains, Utah, is composed of a series of stacked tabular, sheet-like intrusions emplaced at 3–3.5 km depth into sandstone-dominated sedimentary sequences of late Palaeozoic–Mesozoic age. New structural analysis of the spatial distribution, geometry, kinematics and relative timings of deformation structures in the host rocks of the intrusion has enabled the recognition of distinct pre-, syn-, and late-stage-emplacement deformation phases. Our observations suggest a two-stage growth mechanism for individual sheets where radial growth of a thin sheet was followed by vertical inflation. Dip-slip faults formed during vertical inflation; they are restricted to the tips of individual sheets due to strain localisation, with magma preferentially exploiting these faults, initiating sill (sheet) climbing. The order in which sheets are stacked impacts on the intrusion geometry and associated deformation of wall rocks. Our results offer new insights into the incremental intrusion geometries of shallow-level magmatic bodies and the potential impact of their emplacement on surrounding host rocks. 相似文献