共查询到20条相似文献，搜索用时 15 毫秒
1.
The interparticle bonding effect due to water menisci plays an important role in the hydromechanical coupling properties of unsaturated soils. This paper presents an unsaturated hydromechanical coupling model that considers the influence of matric suction, degree of saturation, and microscopic pore structure on the interparticle bonding effect. The enhanced effective stress and bonding variable are selected as constitutive variables. The bonding variable is correlated with the ratio between unsaturated void ratio and saturated void ratio. The deformation characteristics of unsaturated soils are described based on the bounding surface plasticity theory. A soil–water characteristic model that considers deformation and hydraulic hysteresis is integrated into the constitutive model to achieve hydromechanical coupling. The proposed model can effectively describe the hydromechanical coupling characteristics and the meniscus bonding force of unsaturated bimodal structure soils; the model parameters can be easily obtained through routine experiments. The experimental results of unsaturated isotropic compression, the wetting/drying cycle, and unsaturated triaxial shear tests are used to validate the capability of the proposed model. 相似文献
3.
Prediction of unsaturated soil behavior during earthquake loading has received increasing attention in geotechnical engineering research and practice in recent years. Development of a fully coupled analysis procedure incorporating a coupled hydromechanical elastoplastic constitutive model for dynamic analysis of unsaturated soils has, however, been limited. This paper presents the implementation of a coupled hydromechanical elastoplastic constitutive model into a fully coupled dynamic analysis procedure and its validation using a centrifuge test. First, the fully coupled finite element equations governing the dynamic behavior of unsaturated soils with the solid skeleton displacement, pore water pressure, and pore air pressure as nodal unknowns are briefly presented. The closest point projection method is then utilized to implement the coupled hydromechanical elastoplastic constitutive model into the finite element equations. The constitutive model includes hysteresis in soil–water characteristic curves, cyclic elastoplasticity of the solid skeleton, and the coupling mechanisms between the SWCCs and the solid skeleton. Finally, the analysis procedure is validated using the results from a dynamic centrifuge test on an embankment constructed of compacted unsaturated silt subjected to base shaking. Reasonable comparisons between the predicted and measured accelerations, settlements, and deformed shapes are obtained. 相似文献
4.
Fracture interaction mechanisms and reactivation of natural discontinuities under fluid pressurization conditions can represent critical issues in risk assessment of caprock integrity. A field injection test, carried out in a damage fault zone at the decameter scale, i.e., mesoscale, has been studied using a distinct element model. Given the complex structural nature of the damage fault zone hydraulically loaded, the contribution of fracture sets on the bulk permeability has been investigated. It has been shown that their orientation for a given in situ stress field plays a major role. Based on these results, a simpler model with a fluid-driven fracture intersecting a second fracture has been set up to perform a sensitivity analysis. It is in presence of a minimum differential stress value with a minimum angle with the maximum principal stress that the second fracture could be both, hydraulically and mechanically reactivated. Results also showed that in the vicinity of the fluid-driven fracture, a natural fracture will offer contrasted hydromechanical responses on each side of the intersection depending on the stress conditions and its orientation with respect to the stress field. In this case, we show that a hydromechanical decoupling can occur along the same plane. These results provide insights into fracture-controlled permeability of fault zones depending on the properties of the fractures and their hydromechanical interactions for a given in situ stress field. 相似文献
5.
An underground research laboratory (URL) is being constructed by Andra in eastern France, in Callovo-Oxfordian claystone (COx) in which various in situ geomechanical experiments are being undertaken or are to be carried out. The aim of this URL is to characterize the in situ properties of COx claystone and to test disposal technologies in a realistic way in order to assess the short- and long-term safety of a deep radioactive waste repository. In parallel, theoretical and numerical models able to reproduce the phenomena observed under different types of loading paths must be developed.The phenomenological elastic-visco-plastic model developed by Souley et al. (2011) has been enhanced to reflect recent advances in understanding of the mechanical and hydromechanical behavior of COx claystone and the modification of the mechanical and hydraulic properties in the EDZ (Excavation Damage Zone). In particular, the influence of induced damage and fracturing on the delayed strains and strain rates of the COx claystone and the permeability changes observed at the site scale, as well as hydro-mechanical couplings, are discussed and incorporated in a new model. This model is implemented into the commercial code FLAC 3D. Short- and long-term test data (Armand et al., 2016) can be used to identify possible key parameters for the model. These tests were also used to identify certain parameters of our model. Some tests were simulated to verify the numerical implementation of the proposed model.Finally, the simulation of the GCS drift excavation (Seyedi et al., 2016) has been performed. Comparisons to in situ measurements are discussed and some accordance and discrepancies were observed. 相似文献
6.
研究掺砾心墙料的拉裂特性对深入研究高土石坝水力劈裂、坝顶裂缝以及坝肩横缝等问题至关重要,但目前已有的研究尚不够深入。基于自主研制的单向拉伸试验装置,对不同掺砾量下的心墙料进行了系列的单向拉伸试验,依据试验结果分析了掺砾心墙料拉裂破坏的机制。在此基础上得到以下结论：在试样各自最大干密度及最优含水率下,随着掺砾量的增加,心墙料的抗拉强度和拉应变呈线性递减关系;所有试样的拉应力?应变曲线呈分段指数关系,极限拉应力前后试验曲线可分别采用正负指数关系来描述;进行了系列三轴排水剪试验,分析各试样抗拉强度与强度指标的关系发现,对于所研究的掺砾心墙料,抗拉强度与其黏聚力呈较好的线性关系,在不具备试验条件的情况下,此关系可用来大致估算心墙料的抗拉强度。相关试验结果可为实际土心墙坝抗裂设计提供参照。 相似文献
7.
This paper studies the effect of interfacial areas (air–water interfaces and solid–water interfaces) on material strength of unsaturated granular materials. High-resolution X-ray computed tomography technique is employed to measure the interfacial areas in wet glass bead samples. The scanned 3D images are trinarized into three phases and meshed into representative volume elements (RVEs). An appropriate RVE size is selected to represent adequate local information. Due to the local heterogeneity of the material, the discretized RVEs of the scanned samples actually cover a very large range of degree of saturation and porosity. The data of RVEs present the relationship between the specific interfacial areas and degree of saturation and gives boundaries where the interfacial area of a whole sample should fall in. In parallel, suction-controlled direct shear tests have been carried out on glass beads and the material strength has been corroborated with two effective stress definitions related to the specific air–water interfacial areas and fraction of wetted solid surface, respectively. The comparisons show that the specific air–water interfacial area reaches the peak at about 25% of saturation and contributes significantly to the material strength (up to 60% of the total capillary strength). The wetted solid surface obtained from X-ray CT is also used to estimate Bishop’s coefficient χ based on the second type of effective stress definition, which shows a good agreement with the measured value. This work emphasizes the importance to include interface terms in effective stress formulations of unsaturated soils. It also suggests that the X-ray CT technique and RVE-based multiscale analysis are very valuable in the studies of multiphase geomaterials. 相似文献
9.
This paper deals with the hydromechanical modelling of the initiation of failure in soils with particular reference to landslides. To this end, localized and diffused failure modes are simulated with a finite element model for coupled elasto-plastic variably saturated porous geomaterials, in which the material point instability is detected with the second-order work criterion based on Hill’s sufficient condition of stability. Three different expressions of the criterion are presented, in which the second-order work is expressed in terms of generalized effective stress, of total stress and thirdly by taking into account the hydraulic energy contribution for partially saturated materials. The above-mentioned computational framework has been applied to study two initial boundary value problems: shear failure of a plane strain compression test of globally undrained water-saturated dense sand (where cavitation occurs at strain localization) and isochoric grain matter, and the onset of a flowslide from southern Italy due to rainfall (Sarno-Quindici events, May 5–6 1998). It is shown that the second-order work criterion applied at the material point level detects the local material instability and gives a good spatial indication of the extent of the potentially unstable domains in both the localized and diffused failure mechanisms of the cases analyzed, is able to capture the instability induced by cavitation of the liquid water and gives results according to the time evolution of plastic strains and displacement rate. 相似文献
10.
采用非饱和的渗流应力耦合模型分析了糯扎渡水电站2#导流洞的开挖过程,导流洞部分洞身穿过节理带,洞顶水头较高。详细地讨论了高水头和节理带对施工过程的影响。节理带采用描述高密度平行节理组的各向异性节理本构来逼近;考虑开挖引起的介质变形对渗透系数的影响;考虑排水引起的饱和度变化对渗透系数的影响。所用的非饱和瞬态耦合模型可以模拟出开挖引起的EDZ区域孔隙水压力急剧升高、有效应力减小、渗透系数动态的变化以及排水对洞室稳定性的提高。数值模拟的计算结果与国外类似试验的一般性观测结论相吻合,因此,可以用来评价水位以下隧洞施工方法和施工速度的合理性和经济性。 相似文献
12.
高土石心墙坝的渗透稳定性在很大程度上依赖于反滤层对心墙料的反滤保护作用。心墙在大坝蓄水和长期运行的条件下,要经历复杂的填筑加载、浸水饱和与水荷载的作用,在差异沉降、复杂结构应力作用、水力劈裂和渗透水流作用下,心墙一旦出现裂缝,其渗透稳定性及反滤层的保护作用就将面临严峻的考验。针对这一问题,设计了专门非常规的抛填土料反滤试验和泥浆渗透反滤试验,模拟心墙裂缝条件下其颗粒被冲刷起动后,被反滤料阻挡和淤积过程。试验结果表明,心墙料和反滤料满足反滤准则条件下,心墙颗粒被拦截和淤积在反滤层上游表面,反滤料能有效防止心墙颗粒的流失,反滤层在极端条件下对心墙料仍能起到有效的反滤保护作用。 相似文献
13.
This study presents a sophisticated elastoplastic constitutive model for unsaturated soil using Bishop-type skeleton stress and degree of saturation as state variables in the framework of critical state soil mechanism. The model is proposed in order to describe the coupled hydromechanical behavior of unsaturated soil irrespective of what kind of the loadings or the drainage conditions may be. At the same time, a water retention characteristic curve considering the influence of deformation on degree of saturation is also proposed. In the model, the superloading and subloading concepts are introduced to consider the influences of overconsolidation and structure on deformation and strength of soils. The proposed model only employs nine parameters, among which five parameters are the same as those used in Cam-Clay model. The other four parameters have the clear physical meanings and can be easily determined by conventional soil tests. The capability and accuracy of the proposed model have been validated carefully through a series of laboratory tests such as isotropic loading tests and triaxial monotonic and cyclic compression tests under different mechanical and hydraulic conditions. 相似文献
14.
Opalinus clay (OPA) is currently being investigated as a potential host rock for radioactive waste repository. The construction of this repository will lead to an excavation-damaged zone (EDZ) in the surrounding. Its sealing ability is crucial for the safety assessment of the geological repository. The sealing ability of OPA has a close relationship with its water retention and gas permeability behaviours. For this purpose, the water retention and gas permeability of OPA and its comparison with the artificial barrier (i.e. bentonite) were investigated in this study. The results show that OPA absorbed less water than granular bentonite material with equal suction. Compared with the other two similar materials (Boom clay and COx argillite), which were selected as natural engineering barriers for nuclear waste storage in Belgium and France, the suction behaviours of OPA are similar to those of COx argillite but notably different from those of Boom clay. The gas permeability tests show that OPA sample is quite sensitive to the changes in confining pressures but is less sensitive to applied gas pressures. Further, it is found that the OPA is more permeable than bentonite barrier after 10.5 years of hydration. Then, the OPA samples were artificially water-saturated. We find that the sealing ability can be recovered after long-time water saturation. However, when comparing with bentonite barrier, it is still a weak zone. This indicates that the EDZ should be paid more attention for the assessment the performance of the nuclear repository. 相似文献
15.
通过理论分析和数值计算研究深埋地下隧洞开挖卸荷引起的围岩开裂,并分别对准静态和瞬态开挖缷荷引起的围岩开裂机制与开裂特征进行分析。采用双向受压条件下的压剪裂纹扩展模型和应力强度因子计算公式,分析了开挖面上岩体应力瞬态释放和围岩应力瞬态调整对围岩开裂过程的影响,并分别对准静态和瞬态卸荷引起的围岩开裂机制及影响因素进行探讨。研究结果表明,围岩开挖缷荷是深埋隧洞围岩发生开裂的重要原因之一,高地应力条件下围岩以剪切型断裂破坏为主;瞬态卸荷存在动态拉应力效应,开挖卸荷时间越短,引起的拉应力区及围岩开裂范围越大;围岩开裂深度及范围随着侧压力系数增加而增大,且开裂区近似成V型。深埋隧洞围岩开裂特征及影响因素研究,对进一步认识围岩开挖破坏的力学机制具有重要的意义。 相似文献
16.
Earth's porous crust and the fluids within it are intimately linked through their mechanical effects on each other. This paper
presents an overview of such "hydromechanical" coupling and examines current understanding of its role in geologic processes.
An outline of the theory of hydromechanics and rheological models for geologic deformation is included to place various analytical
approaches in proper context and to provide an introduction to this broad topic for nonspecialists.
Effects of hydromechanical coupling are ubiquitous in geology, and can be local and short-lived or regional and very long-lived.
Phenomena such as deposition and erosion, tectonism, seismicity, earth tides, and barometric loading produce strains that
tend to alter fluid pressure. Resulting pressure perturbations can be dramatic, and many so-called "anomalous" pressures appear
to have been created in this manner. The effects of fluid pressure on crustal mechanics are also profound. Geologic media
deform and fail largely in response to effective stress, or total stress minus fluid pressure. As a result, fluid pressures
control compaction, decompaction, and other types of deformation, as well as jointing, shear failure, and shear slippage,
including events that generate earthquakes. By controlling deformation and failure, fluid pressures also regulate states of
stress in the upper crust.
Advances in the last 80 years, including theories of consolidation, transient groundwater flow, and poroelasticity, have been
synthesized into a reasonably complete conceptual framework for understanding and describing hydromechanical coupling. Full
coupling in two or three dimensions is described using force balance equations for deformation coupled with a mass conservation
equation for fluid flow. Fully coupled analyses allow hypothesis testing and conceptual model development. However, rigorous
application of full coupling is often difficult because (1) the rheological behavior of geologic media is complex and poorly
understood and (2) the architecture, mechanical properties and boundary conditions, and deformation history of most geologic
systems are not well known. Much of what is known about hydromechanical processes in geologic systems is derived from simpler
analyses that ignore certain aspects of solid-fluid coupling. The simplifications introduce error, but more complete analyses
usually are not warranted. Hydromechanical analyses should thus be interpreted judiciously, with an appreciation for their
limitations. Innovative approaches to hydromechanical modeling and obtaining critical data may circumvent some current limitations
and provide answers to remaining questions about crustal processes and fluid behavior in the crust.
Electronic Publication 相似文献
17.
A numerical model for the hydromechanical analysis of masonry dams based on the discrete element method is presented. The dam and the rock foundation are represented as block assemblies, and a coupled flow-stress analysis is performed in an integrated manner for the entire system. Complex block shapes may be obtained by assembling elementary blocks into macroblocks, allowing the application of the model to situations ranging from equivalent continuum to fully discontinuum analysis. A contact formulation was developed based on an accurate edge–edge approach, incorporating mechanical and hydraulic behavior. The main numerical aspects are described, with an emphasis in the flow analysis explicit algorithm. An application to an existing masonry dam is presented, analyzing its present condition, with excessive seepage, and the proposed rehabilitation intervention. An evaluation of sliding failure mechanisms was also performed, showing the expected improvement in the safety of the structure. 相似文献
18.
The San Andreas Fault zone in central California accommodates tectonic strain by stable slip and microseismic activity. We study microstructural controls of strength and deformation in the fault using core samples provided by the San Andreas Fault Observatory at Depth (SAFOD) including gouge corresponding to presently active shearing intervals in the main borehole. The methods of study include high-resolution optical and electron microscopy, X-ray fluorescence mapping, X-ray powder diffraction, energy dispersive X-ray spectroscopy, white light interferometry, and image processing.The fault zone at the SAFOD site consists of a strongly deformed and foliated core zone that includes 2–3 m thick active shear zones, surrounded by less deformed rocks. Results suggest deformation and foliation of the core zone outside the active shear zones by alternating cataclasis and pressure solution mechanisms. The active shear zones, considered zones of large-scale shear localization, appear to be associated with an abundance of weak phases including smectite clays, serpentinite alteration products, and amorphous material. We suggest that deformation along the active shear zones is by a granular-type flow mechanism that involves frictional sliding of microlithons along phyllosilicate-rich Riedel shear surfaces as well as stress-driven diffusive mass transfer. The microstructural data may be interpreted to suggest that deformation in the active shear zones is strongly displacement-weakening. The fault creeps because the velocity strengthening weak gouge in the active shear zones is being sheared without strong restrengthening mechanisms such as cementation or fracture sealing. Possible mechanisms for the observed microseismicity in the creeping segment of the SAF include local high fluid pressure build-ups, hard asperity development by fracture-and-seal cycles, and stress build-up due to slip zone undulations. 相似文献
19.
This paper numerically investigates the slurry shield tunneling in fully saturated soils with different hydraulic conductivities in short- and long-term scales. A fully coupled hydromechanical three-dimensional model that accounts for the main aspects of tunnel construction and the hydromechanical interactions due to tunneling process is developed. An elasto-plastic constitutive model obeying a double hardening rule, namely hardening soil model, is employed in the numerical simulations. The research mainly focuses on assessing the influence of soil hydraulic conductivity and the method to simulate backfill grouting in the tail void on the evolution of ground subsidence, excess pore water pressure and lining forces. Two different consolidation schemes have been taken into account to computationally address the tunnel construction in soil with low and high hydraulic conductivities. In addition, different methods are employed to simulate the tail void grouting as a hydromechanical boundary condition and to study its effects on the model responses. Finally, the influences of infiltration of the fluidized particles of grouting suspension into the surrounding soil and its corresponding time–space hydraulic conductivity evolution on the displacements and lining forces are studied. 相似文献
20.
Bentonite has been proposed for use as an engineering barrier and buffer in nuclear waste repositories and has been used frequently in municipal waste landfills. The cracking behavior and deformation properties of this material can be influenced by the chemistry of pore water. In the present work, the influence of salt concentration on the desiccation cracking behavior of GMZ bentonite was investigated with laboratory experiments. Image processing techniques and SEM tests were performed on the specimens which had undergone the desiccation testing in order to analyze the cracking mechanisms. Results show that the water evaporation process can be identified by a steady rate stage, a falling rate stage and a residual stage. The water evaporation rate is strongly affected by the salt concentration of the pore water; higher salt concentrations result in lower evaporation rates; the final water content is strongly impacted by a high initial salinity; otherwise the water contents are very similar for the residual stage. During desiccating, most of cracks appeared at the steady evaporation stage. The cracking morphology and patterns were greatly affected by the salt concentration of the pore water; and larger crack lengths and lower crack densities were obtained as the initial salinity was increased. 相似文献
|
