共查询到20条相似文献，搜索用时 671 毫秒
1.
ALAN P. HEWARD 《Sedimentology》1978,25(4):451-488
Vertical sequence analysis within 1500-2500 m thick coarse-grained coalfield successions allows six sedimentary associations to be distinguished. These are interpreted in terms of depositional environments on, or related to alluvial fans which fringed a fault bounded source region. (i) Topographic valley and fanhead canyon fills: occurring at the bases of the coalfield successions and comprising sporadically reddened, scree, conglomeratic thinning and fining upward sequences, and fine-grained coal-bearing sediments. (ii) Alluvial fan channels: conglomerate and sandstone filled. (iii) Mid-fan conglomeratic and sandstone lobes: laterally extensive, thickly bedded (1-25 m) and varying from structureless coarse conglomerates and pebbly sandstones, to stratified fine conglomerates and cross-bedded sandstones. (iv) Interlobe and interchannel: siltstones, fine-grained sheet sandstones, abundant floras, thin coals and upright trees. (v) Distal fan: 10 cm-1.5 m thick sheet sandstones which preserve numerous upright trees, separated by silt-stones and mudstones with abundant floras, and coal seams. The sheet sandstones and normally arranged in sequences of beds which become thicker and coarser or thinner and finer upwards. These trends also occur in combination. (vi) Lacustrine: coals, limestones, and fine-grained, low-energy, regressive, coarsening upward sequences. Proximal fan sediments are only preserved in certain basal deposits of these coalfields. The majority of the successions comprise mid and distal alluvial fan and lacustrine sediments. Mid-fan depositional processes consisted of debris flows and turbulent streamflows, whilst sheetfloods dominated active distal areas. A tropical and seasonal climate allowed vegetation to colonize abandoned fan surfaces and perhaps resulted in localized diagenetic reddening. Worked coals, from 10s cm-20 m thick, occur in the distal fan and lacustrine environments. These alluvial fan deposits infill‘California-like’basins developed and preserved along major structural zones. In many of their characteristics, in particular the occurrence of thinning and fining, and thickening and coarsening upward sequences and megasequences, these sediments have similarities to documented ancient submarine fan deposits. 相似文献
2.
Architecture of fluvial-dominated valley-fill deposits in the Cretaceous Fall River Formation 总被引：1，自引：0，他引：1
BRIAN J. WILLIS 《Sedimentology》1997,44(4):735-757
The Fall River Formation is a 45 m thick layer of fluvial-dominated valley-fills and shore-zone strata deposited on the stable cratonic margin of the Cretaceous Western Interior Seaway. Fall River deposits in Red Canyon, in the south-west corner of South Dakota (USA), expose a cross-section of a 3.5 km wide valley-fill sandstone and laterally adjacent marine deposits. The marine deposits comprise three 10 m thick upward-shoaling sequences; each composed of multiple metres-thick upward-coarsening successions. The lower two of these sequences are laterally cut by the valley-fill sandstone, and are capped by metres-thick muddy palaeosols. The upper sequence spans the top of the valley-fill sandstone, and is overlain by the Skull Creek Shale. The 30 m thick valley sandstone is partitioned into four distinct fills by major erosion surfaces, and each of these fills contain many metres-thick channel-form bodies. Deposits in the lower parts of these fills are sheet-like, top-truncated channel bodies, whereas deposits in the upper parts of fills are upward-concave, laterally amalgamated channel bodies, more completely preserved heterolithic channel bodies, or wave-deposited sheets. Each valley-fill basal erosion surface records an episode of valley incision and relative sea-level fall, and the gradual progression from fluvial to more estuarine deposits upwards within each fill records relative sea-level rise. All fills are dominantly channel deposits and are capped by marine flooding surfaces. The dominance of channel deposits, the gradual change to more estuarine facies in the upper parts of fills, and the location of flooding surfaces at valley-fill tops all suggest that sediment supply initially kept pace with relative sea-level rise and valleys filled during late marine lowstand and transgression, not during subsequent highstands. Recently proposed facies models have focused on variations in the relative strength of tide, wave and river currents as controls on valley-fill deposits. However, relative rates of sediment supply and basin accommodation change, and the shift in this ratio along the depositional profile during multiple-scale cycles in relative sea-level, are equally important controls on the style of valley-fill deposits. 相似文献
3.
利用高品质3D地震资料搜索刻画深水水道—朵叶复合体的沉积构成并揭示油气储集体的分布模式对于深水油气勘探具有重要的指导意义。利用PaleoScan全三维智能解释手段和三色(RGB)混相分频技术识别解剖了孟加拉扇上新统—更新统深水水道—天然堤体系6种富砂沉积单元,包括补给水道、分支水道、似点坝、决口扇、漫溢扇和末端朵叶。研究认为:补给水道、决口扇、末端朵叶是潜在的规模且优质深水油气储集体类型;而漫溢扇、分支水道和似点坝分别是潜在的规模非优质、非优质非规模以及优质非规模深水油气储层类型。补给水道主要分布在水道—朵叶复合体的上游和中游;决口扇、漫溢扇、分支水道和似点坝主要发育在水道—朵叶复合体的中游;而分支水道和末端朵叶主要分布在水道—朵叶复合体的下游。漫溢扇向供源水道一侧楔状增厚,形成“砂盖泥”的格局;而决口扇向供源水道一侧楔状减薄直至尖灭形成“泥包砂”的格局,相应形成海底扇岩性圈闭。 相似文献
4.
5.
应用深水沉积学和地震沉积学的相关理论,通过岩心观察描述、钻测井资料分析及平面沉积相编图,对下刚果盆地A区块白垩系Pointe Indienne组深水重力流的类型、沉积特征、垂向沉积组合及沉积模式进行了探讨分析,指出该地区发育砂质碎屑流、泥质碎屑流、浊流及与重力流形成过程相关的滑动—滑塌沉积,并总结了该深水重力流的沉积模式。结果表明:砂质碎屑流沉积以块状层理细砂岩为主,含大型漂浮泥砾和泥岩撕裂屑;泥质碎屑流沉积以泥级碎屑为主,含有少量的暗色泥岩碎屑和砂质团块,见“泥包砾”结构;浊流沉积以发育完整或不完整的鲍马序列为特征;滑动—滑塌沉积具有明显的剪切滑移面,可见旋转火焰构造、砂岩扭曲杂乱分布及褶皱变形层;纵向上可识别出4种类型的重力流沉积垂向组合,以多期砂质碎屑流沉积叠置和砂质碎屑流沉积与浊流沉积叠置最为常见;研究区深水重力流沉积可分为上部扇、中部扇和外部扇3部分,上部扇以主水道沉积为主;中部扇以辫状水道和溢岸沉积为主,砂体厚度较大;外部扇以朵叶体沉积和薄层浊积岩为主,砂体厚度相对较薄。 相似文献
6.
Turbidites in the Upper Carboniferous Ross Formation, western Ireland: reconstruction of a channel and spillover system 总被引：2，自引：0，他引：2
ABSTRACT The Upper Carboniferous deep‐water rocks of the Shannon Group were deposited in the extensional Shannon Basin of County Clare in western Ireland and are superbly exposed in sea cliffs along the Shannon estuary. Carboniferous limestone floors the basin, and the basin‐fill succession begins with the deep‐water Clare Shales. These shales are overlain by various turbidite facies of the Ross Formation (460 m thick). The type of turbidite system, scale of turbidite sandstone bodies and the overall character of the stratigraphic succession make the Ross Formation well suited as an analogue for sand‐rich turbidite plays in passive margin basins around the world. The lower 170 m of the Ross Formation contains tabular turbidites with no channels, with an overall tendency to become sandier upwards, although there are no small‐scale thickening‐ or thinning‐upward successions. The upper 290 m of the Ross Formation consists of turbidites, commonly arranged in thickening‐upward packages, and amalgamated turbidites that form channel fills that are individually up to 10 m thick. A few of the upper Ross channels have an initial lateral accretion phase with interbedded sandstone and mudstone deposits and a subsequent vertical aggradation phase with thick‐bedded amalgamated turbidites. This paper proposes that, as the channels filled, more and more turbidites spilled further and further overbank. Superb outcrops show that thickening‐upward packages developed when channels initially spilled muds and thin‐bedded turbidites up to 1 km overbank, followed by thick‐bedded amalgamated turbidites that spilled close to the channel margins. The palaeocurrent directions associated with the amalgamated channel fills suggest a low channel sinuosity. Stacks of channels and spillover packages 25–40 m thick may show significant palaeocurrent variability at the same stratigraphic interval but at different locations. This suggests that individual channels and spillover packages were stacked into channel‐spillover belts, and that the belts also followed a sinuous pattern. Reservoir elements of the Ross system include tabular turbidites, channel‐fill deposits, thickening‐upward packages that formed as spillover lobes and, on a larger scale, sinuous channel belts 2·5–5 km wide. The edges of the belts can be roughly defined where well‐packaged spillover deposits pass laterally into muddier, poorly packaged tabular turbidites. The low‐sinuosity channel belts are interpreted to pass downstream into unchannellized tabular turbidites, equivalent to lower Ross Formation facies. 相似文献
7.
Shallow-water gravity-flow deposits, Chapel Island Formation, southeast Newfoundland, Canada 总被引：3，自引：0，他引：3
A remarkable suite of shallow-water, gravity-flow deposits are found within very thinly-bedded siltstones and storm-generated sandstones of member 2 of the Chapel Island Formation in southeast Newfoundland. Medium to thick siltstone beds, termed unifites, range from non-graded and structureless (Type 1) to slightly graded with poorly developed lamination (Type 2) to well graded with lamination similar to that described for fine-grained turbidites (Type 3). Unifite beds record deposition from a continuum of flow types from liquefied flows (Type 1) to turbidity currents (Type 3). Calculations of time for pore-fluid pressure dissipation support the feasibility of such transitions. Raft-bearing beds consist of siltstone with large blocks or‘rafts’ of thinly bedded strata derived from the underlying and adjacent substrate. Characteristics suggest deposition from debris flows of variable strength. Estimates of debris strength and depositional slope are calculated for a pebbly mudstone bed using measurable and assumed parameters. An assumed density of 2.0 g cm-1 and a compaction estimate of 50% gives a strength estimate of 79.7 dyn cm-2 and a depositional slope estimate of 0.77°. The lithologies and sedimentary structures in member 2 indicate an overall grain-size distribution susceptible to liquefaction. Inferred high sediment accumulation rates created underconsolidated sediments (metastable packing). Types of sediment failure included in situ liquefaction (‘disturbed bedding’), sliding and slumping. Raft-bearing debrites resulted from sliding and incorporation of water. Locally, hummocky cross-stratified sandstone directly overlies slide deposits and raft-bearing beds, linking sediment failure to the cyclical wave loading associated with large storms. The gravity flows of the Chapel Island Formation closely resemble those described from the surfaces of modern, mud-rich, marine deltas. Details of deltaic gravity-flow deposition from this and other outcrop studies further our understanding of modern deposits by adding a third dimension to studies primarily carried out with side-scan sonar. 相似文献
8.
Coarse‐grained deep‐water strata of the Cerro Toro Formation in the Cordillera Manuel Señoret, southern Chile, represent the deposits of a major channel belt (4 to 8 km wide by >100 km long) that occupied the foredeep of the Magallanes basin during the Late Cretaceous. Channel belt deposits comprise a ca 400 m thick conglomeratic interval (informally named the ‘Lago Sofia Member’) encased in bathyal fine‐grained units. Facies of the Lago Sofia Member include sandy matrix conglomerate (that show evidence of traction‐dominated deposition and sedimentation from turbulent gravity flows), muddy matrix conglomerate (graded units interpreted as coarse‐grained slurry‐flow deposits) and massive sandstone beds (high‐density turbidity current deposits). Interbedded sandstone and mudstone intervals are present locally, interpreted as inner levée deposits. The channel belt was characterized by a low sinuousity planform architecture, as inferred from outcrop mapping and extensive palaeocurrent measurements. Laterally adjacent to the Lago Sofia Member are interbedded mudstone and sandstone facies derived from gravity flows that spilled over the channel belt margin. A levée interpretation for these fine‐grained units is based on several observations, which include: (i) palaeocurrent measurements that indicate flows diverged (50° to 100°) once they spilled over the confining channel margin; (ii) sandstone beds progressively thin, away from the channel belt margin; (iii) evidence that the eroded channel base was not very well indurated, including a stepped margin and injection of coarse‐grained channel material into surrounding fine‐grained units; and (iv) the presence of sedimentary features common to levées, including slumped units inferring depositional slopes dipping away from the channel margin, lenticular sandstone beds thinning distally from the channel margin, soft sediment deformation and climbing ripples. The tectonic setting and foredeep architecture influenced deposition in the axial channel belt. A significant downstream constriction of the channel belt is reflected by a transition from more tabular units to an internal architecture dominated by lenticular beds associated with a substantially increased degree of scour. Differential propagation of the fold‐thrust belt from the west is speculated to have had a major control on basin, and subsequently channel, width. The confining influence of the basin slopes that paralleled the channel belt, as well as the likelihood that numerous conduits fed into the basin along the length of the active fold‐thrust belt to the west, suggest that proximal–distal relationships observed from large channels in passive margin settings are not necessarily applicable to axial channels in elongate basins. 相似文献
9.
深水水道沉积是深水区重要沉积类型之一,对其形成机制研究不仅能提高深水沉积认识,还能为油气勘探提供帮助.以露头资料为基础,对鄂尔多斯盆地西缘奥陶系拉什仲组深水水道形成机制进行了详细研究.拉什仲组岩性以灰绿色页岩及砂岩为主,另见少量的粉砂岩及砾岩.槽模、交错层理、粒序层理及变形构造等发育.总体反映深水沉积环境,重力流沉积较为发育.其中,深水水道沉积极为典型.根据形态、结构及沉积方式等,将研究区深水水道沉积划分为限制型和非限制型水道沉积.前者包括复合型及垂向加积型水道沉积,后者由迁移型及孤立型小水道沉积组成.复合型水道沉积厚约7.5 m,岩性以粗砂岩为主,底部见砾岩,水道轴部沉积、次级水道及水道-堤岸复合体沉积发育,可分为早期、中期和晚期.垂向加积型水道沉积宽为12.4 m,厚为1.3 m,宽深比为9.54,以中砂岩及细砂岩为主,水道内部以层状砂岩充填为主.迁移型水道沉积宽为6.9~12.3 m,厚为0.23~0.73 m,宽厚比14.11~53.48,以中-细砂岩为主,具有明显的北西向迁移特征;孤立型小水道沉积宽为0.5~0.6 m,厚为0.15~0.25 m,宽厚比为2.4~3.33,多为细砂-粉砂岩组成,透镜状,规模小.重力流爆发初期,能量高,侵蚀作用强,发育复合型及垂向加积型水道沉积;重力流中-后期,能量逐渐降低,迁移型水道沉积开始发育;在重力流后期及末期,其能量进一步降低,发育孤立型小水道沉积.而在空间位置上,复合型及垂向加积型水道沉积多发育在斜坡中上部,中部及下部发育迁移型水沉积道,斜坡脚及深海盆地以孤立型小水道沉积最为发育. 相似文献
10.
Sheetflow fluvial processes in a rapidly subsiding basin, Altiplano plateau, Bolivia 总被引：2，自引：0，他引：2
Although facies models of braided, meandering and anastomosing rivers have provided the cornerstones of fluvial sedimentology for several decades, the depositional processes and external controls on sheetflow fluvial systems remain poorly understood. Sheetflow fluvial systems represent a volumetrically significant part of the non‐marine sedimentary record and documented here are the lithofacies, depositional processes and possible roles of rapid subsidence and arid climate in generating a sheetflow‐dominated fluvial system in the Cenozoic hinterland of the central Andes. A 6500 m thick succession comprising the Late Eocene–Oligocene Potoco Formation is exposed continuously for >100 km along the eastern limb of the Corque syncline in the high Altiplano plateau of Bolivia. Fluvial sandstone and mudstone units were deposited over an extensive region (>10 000 km2) with remarkably few incised channels or stacked‐channel complexes. The Potoco succession provides an exceptional example of rapid production of accommodation sustained over a prolonged period of time in a non‐marine setting (>0·45 mm year−1 for 14 Myr). The lower ≈4000 m of the succession coarsens upward and consists of fine‐grained to medium‐grained sandstone, mudstone and gypsum deposits with palaeocurrent indicators demonstrating eastward transport. The upper 2500 m also coarsens upward, but contains mostly fine‐grained to medium‐grained sandstone that exhibits westward palaeoflow. Three facies associations were identified from the Potoco Formation and are interpreted to represent different depositional environments in a sheetflow‐dominated system. (i) Playa lake deposits confined to the lower 750 m are composed of interbedded gypsum, gypsiferous mudstone and sandstone. (ii) Floodplain deposits occur throughout the succession and include laterally extensive (>200 m) laminated to massive mudstone and horizontally stratified and ripple cross‐stratified sandstone. Pedogenic alteration and root casts are common. (iii) Poorly confined channel and unconfined sheet sandstone deposits include laterally continuous beds (50 to >200 m) that are defined primarily by horizontally stratified and ripple cross‐stratified sandstone encased in mudstone‐rich floodplain deposits. The ubiquitous thin‐sheet geometry and spatial distribution of individual facies within channel sandstone and floodplain deposits suggest that confined to unconfined, episodic (flash) flood events were the primary mode of deposition. The laterally extensive deposition and possible distributary nature of this sheetflow‐dominated system are attributed to fluvial fan conditions in an arid to semi‐arid, possibly seasonal, environment. High rates of sediment accumulation and tectonic subsidence during early Andean orogenesis may have favoured the development and long‐term maintenance of a sheetflow system rather than a braided, meandering or anastomosing fluvial style. It is suggested here that rapidly produced accommodation space and a relatively arid, seasonal climate are critical conditions promoting the generation of sheetflow‐dominated fluvial systems. 相似文献
11.
鄂尔多斯盆地西缘桌子山地区中奥陶统克里摩里组下段以深灰色薄—中层石灰岩夹灰黑色极薄层泥岩为特征,石灰岩单层略显透镜状且基本未受后期成岩作用改造,其中石峡谷剖面垂向上特征变化明显,是研究该组沉积过程的理想剖面。本次研究在详细的野外观察基础上,依据岩石特征和沉积构造进一步确认克里摩里组深水斜坡沉积背景和等深流沉积,同时详细研究了薄—中层石灰岩的充填特征和形态特征,探讨其水动力特征和沉积机制。结果表明: (1)在粉晶石灰岩和灰泥石灰岩中,晶粒呈散点状分布,粉晶之间为灰泥充填,同时岩层内部具有不均一性,粗粉晶、细粉晶和灰泥呈相间分布;(2)石灰岩主要发育和单层内粒度(方解石晶粒)变化有关的沉积构造,包括具有双向递变特征的粒序层、条带状构造和水平层—均匀层—水平层序列;(3)石灰岩层中透镜体发育,包括薄层中的小型连续透镜体、中层(一般小于30cm)中的长透镜体以及由多个石灰岩层组成的透镜体,后者侧向上尖灭于页岩或地形高处,其内部单个岩层可呈对称性尖灭;(4)剖面上发育单层石灰岩厚度向上变薄的垂向序列以及由该序列组成的石灰岩叠置层。结合已有研究成果认为: 克里摩里组下段薄—中层石灰岩沉积于深水底流发育环境,其水动力具有低速、弱—强—弱周期变化和空间上受限的特征,应为等深流水道沉积,其沉积机制可分为3个阶段,即等深流作用前的清水钙质沉积、等深流作用期间对沉积物的改造和等深流作用后的浑水泥质沉积。 相似文献
12.
Architectural element analysis and detailed mapping of a 300 m along-strike exposure of the middle member Wood Canyon Formation, southern Marble Mountains, California, USA, provides new evidence for extensive braided–fluvial channel-belt deposits with adjacent overbank environments. Three-dimensional models constructed using ‘Structure from Motion’ techniques, combined with field-based observations, allowed interpretation of outcrop-scale trends, barforms, channel fills and fine-scale features. The ca 80 m thick member is divisible into five distinct units, including units M1 to M3 that form the bulk of the stratigraphy. Units are defined by stacking patterns of three facies associations (Facies Association 1 to Facies Association 3), each representing the product of a subenvironment within the fluvial system. In Facies Association 1, stacked cosets, interpreted as low-relief fluvial bars and channel fills, preserve vertical-accretion and downstream-accretion elements under unimodal north-north-west palaeoflow, with minor lateral accretion near bar edges. Deposits of Facies Association 2 to Facies Association 3, linked to overbank environments, are found only in unit M2, in the middle 27 m of the middle member. Floodplains, represented by Facies Association 2, include crumbly red-orange intervals of fine to medium-grained sandstone and thinner sets of cross-bedding than Facies Association 1, interbedded with thicker cross-stratification indicative of overbank splay or overland flow aggradation from adjacent channel belts during flood stage. Possible aeolian beds of Facies Association 3 preserve broad festooned trough cross-strata that average 23 cm in thickness; their small size, medium-grained sandstone and iron oxide cement suggest a high water table. The diverse assemblage of interpreted subenvironments, paired with bedform and facies patterns, implies a perennial fluvial system that gradually built large sand bars as the channel belt migrated and avulsed across an unconfined braided–fluvial reach, leaving the overbank area on its flanks subject to weathering and aeolian transport. Despite the occurrence of strata deposited in low-energy and ponded settings, and a marine influence proposed for nearby sections of middle member, no ichnofossils were encountered. 相似文献
13.
陆相深水重力流水道的类型细分及其沉积模式是制约其油气勘探开发的重要因素,但研究程度低。通过对鄂尔多斯盆地南缘瑶曲铁路桥剖面三叠系延长组实测、水道形态参数统计及岩相、粒度等分析,开展了湖相重力流水道的沉积特征、沉积过程及沉积模式研究。结果表明:(1)研究区内可识别出4期复合水道,主要为洪水重力流成因。根据其内部单一水道及单砂体形态特征、岩相组成,将其细分为沉积型和过渡型两类。(2)剖面下部2期复合水道为沉积型,以悬浮载荷成因岩相为主,常见块状净细砂岩、薄层泥岩岩相组合和鲍马序列岩相组合;上部2期复合水道为过渡型,岩相以底床载荷与悬浮载荷共存为特征,自下而上以交错层理细砂岩或叠瓦状泥砾细砂岩与含泥砾/泥岩撕裂屑块状细砂岩、平行层理粗粉砂岩及薄层泥岩的岩相组合为特征。(3)结合单一水道规模及其相互关系,建立了区内过渡、沉积型重力流水道的半定量沉积模式。过渡型水道内部侵蚀与沉积作用共存,单一水道宽度小、宽厚比低,呈透镜状,水道间切割性强,砂体横向稳定性较低,表现出不定向叠加、侧向拼接样式;沉积型水道内部由沉积作用主导,单一水道宽度较大、宽厚比较高,呈似板状—透镜状,砂体横向稳定性较高,表现出稳定的垂向加积样式。 相似文献
14.
Fluvial ribbon sandstone bodies are ubiquitous in the Ebro Basin in North‐eastern Spain; their internal organization and the mechanics of deposition are as yet insufficiently known. A quarrying operation in an Oligocene fluvial ribbon sandstone body in the southern Ebro Basin allowed for a three‐dimensional reconstruction of the sedimentary architecture of the deposit. The sandstone is largely a medium‐grained to coarse‐grained, moderately sorted lithic arenite. In cross‐section, the sandstone body is 7 m thick, occupies a 5 m deep incision and wedges out laterally, forming a ‘wing’ that intercalates with horizontal floodplain deposits in the overbank region. Three architectural units were distinguished. The lowest and highest units (Units A and C) mostly consist of medium‐grained to coarse‐grained sandstone with medium‐scale trough cross‐bedding and large‐scale inclined stratasets. Each of Units A and C comprises a fining‐up stratal sequence reflecting deposition during one flood event. The middle unit (Unit B) consists of thinly bedded, fine‐grained sandstone/mudstone couplets and represents a time period when the channel was occupied by low‐discharge flows. The adjoining ‘wing’ consists of fine‐grained sandstone beds, with mudstone interlayers, correlative to strata in Units A and C in the main body of the ribbon sandstone. In plan view, the ribbon sandstone comprises an upstream bend and a downstream straight reach. In the upstream bend, large‐scale inclined stratasets up to 3 m in thickness represent four bank‐attached lateral channel bars, two in each of Units A and C. The lateral bars migrated downflow and did not develop into point bars. In the straight downstream reach, a tabular cross‐set in Unit A represents a mid‐channel transverse bar. In Unit C, a very coarse‐grained, unstratified interval is interpreted as deposited in a riffle zone, and gives way downstream to a large mid‐channel bar. The relatively simple architecture of these bars suggests that they developed as unit bars. Channel margin‐derived slump blocks cover the upper bar. The youngest deposit is fine‐grained sandstone and mudstone that accumulated immediately before avulsion and channel abandonment. Deposition of the studied sandstone body reflects transport‐limited sediment discharges, possibly attaining transient hyperconcentrated conditions. 相似文献
15.
Facies bodies in geostatistical models of deep-water depositional environments generally represent channel-levee-overbank-lobe morphologies. Such models adequately capture one set of the erosional and depositional processes resulting from turbidity currents traveling downslope to the ocean basin floor. However, depositional morphologies diverge from the straight forward channel-levee-overbank-lobe paradigm when the topography of the slope or the shape of the basin impacts the timing and magnitude of turbidity current deposition. Subaqueous mass-transport-deposits (MTDs) present the need for an exception to the channel-levee-overbank-lobe archetype. Irregular surface topography of subaqueous MTDs can play a primary role in controlling sand deposition from turbidity currents. MTD topography creates mini-basins in which sand accumulates in irregularly-shaped deposits. These accumulations are difficult to laterally correlate using well-log data due to their variable and unpredictable shape and size. Prediction is further complicated because sandstone bodies typical of this setting are difficult to resolve in seismic-reflection data. An event-based model is presented, called DFTopoSim, which simulates debris flows and turbidity currents. The accommodation space on top of and between debris flow lobes is filled in by sand from turbidity currents. When applied to a subsurface case in the Molasse Basin of Upper Austria, DFTopoSim predicts sand packages consistent with observations from core, well, and seismic data and the interpretation of the sedimentologic processes. DFTopoSim expands the set of available geostatistical deep-water depositional models beyond the standard channel-levee-overbank-lobe model. 相似文献
16.
Marco Patacci Mattia Marini Fabrizio Felletti Andrea Di Giulio Massimo Setti William McCaffrey 《Sedimentology》2020,67(5):2625-2644
The partitioning of different grain-size classes in gravity flow deposits is one of the key characteristics used to infer depositional processes. Turbidites have relatively clean sandstones with most of their clay deposited as part of a mudstone cap or as a distal mudstone layer, whereas sand-bearing debrites commonly comprise mixtures of sand grains and interstitial clay; hybrid event beds develop alternations of clean and dirty (clay-rich) sandstones in varying proportions. Analysis of co-genetic mudstone caps in terms of thickness and composition is a novel approach that can provide new insight into gravity flow depositional processes. Bed thickness data from the ponded Castagnola system show that turbidites contain more clay overall than do hybrid event beds. The Castagnola system is characterized by deposits of two very different petrographic types. Thanks to this duality, analyses of sandstone and mudstone composition allow inference of which proportion of the clay in each of the deposit types was acquired en route. In combination with standard sedimentological observations the new data allow insight into the likely characteristics of their parent flows. Clean turbidites were deposited by lower concentration, long duration, erosive, muddy turbidity currents which were more efficient at fractionating clay particles away from their basal layer. Hybrid event beds were deposited by shorter duration, higher-concentration, less-erosive sandier flows which were less efficient at clay fractionation. The results are consistent with data from other turbidite systems (for example, Marnoso-arenacea). The approach represents a new method to infer the controls on the degree of clay partitioning in gravity flow deposits. 相似文献
17.
Raymond V. Ingersoll 《Sedimentary Geology》1978,21(3):205-230
The Upper Cretaceous part of the Great Valley Sequence provides a unique opportunity to study deep-marine sedimentation within an arc-trench gap. Facies analysis delineates submarine fan facies similar to those described from other ancient basins. Fan models and facies of Mutti and Ricci-Lucchi allow reconstruction of the following depositional environments: basin plain, outer fan, midfan, inner fan, and slope. Basin plain deposits are characterized by hemipelagic mudstone with randomly interbedded thin sandstone beds exhibiting distal turbidite characteristics. Outer fan deposits are characterized by regularly interbedded sandstone and mudstone, and commonly exhibit thickening-upward (negative) cycles that constitute depositional lobes. The sandstone occurs as proximal to distal turbidites without channeling. Midfan deposits are characterized by the predominance of coarse-grained, thick, channelized sandstone beds that commonly are amalgamated. Thinning-upward (positive) cycles and braided channelization also are common. Inner fan deposits are characterized by major channel-fill complexes (conglomerate, pebbly sandstone, and pebbly mudstone) enclosed in mudstone and siltstone. Positive cycles occur within these channel-fill complexes. Much of the fine-grained material consists of levee (overbank) deposits that are characterized by rhythmically interbedded thin mudstone and irregular sandstone beds with climbing and starved ripples. Slope deposits are characterized by mudstone with little interbedded sandstone; slumping and contortion of bedding is common. Progressions of fan facies associations can be described as retrogradational and progradational suites that correspond, respectively, to onlapping and offlapping relations in the basin. The paleoenvironments, fan facies associations, and tectonic setting of the Late Cretaceous fore-arc basin are similar to those of modern arc—trench systems. 相似文献
18.
应用研究区丰富的密井网和邻近露头资料,探讨了新疆克拉玛依油田三叠系克下组冲积扇内部构型单元的层次划分系统,并建立相应的沉积构型模式。在冲积扇的扇根、扇中和扇缘各亚相带,进一步划分了3个级次的构型要素以表达其内的沉积复杂性。扇根亚相主要由主槽、片流带和漫洪带组成,其中,在主槽内主要发育槽流砾石（岩）体（可细分为砾石坝和流沟）与泥石流沉积,在片流带内主要发育片流砂砾体（可细分为砾石坝和流沟）,在漫洪带主要发育漫洪砂体和漫洪细粒沉积,总体构型样式以广泛分布的砾石坝夹含流沟和漫洪沉积的“泛连通体”为特征;扇中亚相主要由辫流带和漫流带组成,其中,辫流带的主体构型要素为辫流水道（可细分为砂坝和沟道）,总体构型样式为复合宽带状辫流水道砂体与漫流细粒沉积侧向相间、垂向互层为特征;扇缘亚相主要由径流带和漫流带组成,其中,径流带的主体构型要素为径流水道,总体构型样式以窄带状径流水道和漫流砂体镶嵌于漫流—湿地泥岩之中为特征。 相似文献
19.
DONALD J. P. SWIFT PETER M. HUDELSON ROBERT L. BRENNER PETER THOMPSON 《Sedimentology》1987,34(3):423-457
The Upper Cretaceous (Campanian) Kenilworth Member of the Blackhawk Formation (Mesaverde Group) is part of a series of strand plain sandstones that intertongue with and overstep the shelfal shales of the western interior basin of North America. Analysis of this section at a combination of small (sedimentological) and large (stratigraphical) scales reveals the dynamics of progradation of a shelf-slope sequence into a subsiding foreland basin. Four major lithofacies are present in the upper Mancos and Kenilworth beds of the Book Cliffs. A lag sandstone and channel-fill shale lithofacies constitutes the thin, basal, transgressive sequence, which rests on a marine erosion surface. It was deposited in an outer shelf environment. Shale, interbedded sandstone and shale, and amalgamated sandstone lithofacies were deposited over the transgressive lag sandstone lithofacies as a wave-dominated delta and its flanking strand plains prograded seaward. Analysis of grain size and primary structures in Kenilworth beds indicates that there are four basic strata types which combine to build the observed lithofacies. The fine- to very fine-grained graded strata of the interbedded facies are tempestites, deposited out of suspension by alongshelf storm flows (geostrophic flows). There is no need to call on cross-shelf turbidity currents (density underflows) to explain their presence. Very fine- to fine-grained hummocky strata are likewise suspension deposits created by waning storm flows, but were deposited under conditions of more intense wave agitation on the middle shoreface. Cross-strata sets in this region are bed-load deposits that accumulated on the upper shore-face, in the surf zone. Lag strata are multi-event, bed-load deposits that are the product of prolonged storm winnowing. They occur on transgressive surfaces. While the graded beds are tempestites in the strict sense, all four classes of strata are storm deposits. The distribution of strata types and their palaeocurrent orientations suggests a model of the Kenilworth transport system driven by downwelling coastal storm flows, and probably by a northeasterly alongshore pressure gradient. The stratification patterns shift systematically from upper shoreface to lower shoreface and inner shelf lithofacies partly because of a reduction in fluid power expenditure with increasing water depth, but also because of progressive sorting, which resulted in a decrease in grain size in the sediment load delivered to successive downstream environments. The Kenilworth Member and an isolated outlier, the Hatch Mesa lentil, constitute a delta-prodelta shelf depositional system. Their rhythmically bedded, lenticular, sandstone and shale successions are a prodelta shelf facies, and may be prodelta plume deposits. Major Upper Cretaceous sandstone tongues in the Book Cliffs are underlain by erosional surfaces like that beneath the Blackhawk Formation, which extend for many tens of kilometres into the Mancos shale. These surfaces are the boundaries of Upper Cretaceous depositional sequences. The sequences are large-scale genetic stratigraphic units. They result from the arranging of facies into depositional systems; the depositional systems are in turn stacked in repeating arrays, which constitute the depositional sequences. The anatomy of these foreland basin sequences differs 相似文献