首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
We have carried out in situ X-ray diffraction experiments on the FeS–H system up to 16.5 GPa and 1723 K using a Kawai-type multianvil high-pressure apparatus employing synchrotron X-ray radiation. Hydrogen was supplied to FeS from the thermal decomposition of LiAlH4, and FeSHx was formed at high pressures and temperatures. The melting temperature and phase relationships of FeSHx were determined based on in situ powder X-ray diffraction data. The melting temperature of FeSHx was reduced by 150–250 K comparing with that of pure FeS. The hydrogen concentration in FeSHx was determined to be x = 0.2–0.4 just before melting occurred between 3.0 and 16.5 GPa. It is considered that sulfur is the major light element in the core of Ganymede, one of the Galilean satellites of Jupiter. Although the interior of Ganymede is differentiated today, the silicate rock and the iron alloy mixed with H2O, and the iron alloy could react with H2O (as ice or water) or the hydrous silicate before the differentiation occurred in an early period, resulting in a formation of iron hydride. Therefore, Ganymede's core may be composed of an Fe–S–H system. According to our results, hydrogen dissolved in Ganymede's core lowers the melting temperature of the core composition, and so today, the core could have solid FeSHx inner core and liquid FeHx–FeSHx outer core and the present core temperature is considered to be relatively low.  相似文献   

2.
High pressure experiments using the sink/float method have bracketed the density of hydrous iron-rich ultrabasic silicate melt from 1.35 to 10.0 GPa at temperatures from 1400 to 1860 °C. The silicate melt composition was a 50–50 mixture of natural komatiite and synthetic fayalite. Water was added in the form of brucite Mg(OH)2 and was present in the experimental run products at 2 wt.% and 5 wt.% levels as confirmed by microprobe analyses of total oxygen. Buoyancy marker spheres were olivines and garnets of known composition and density. The density of the silicate melt with 5 wt.% water at 2 GPa and 1500 °C is 0.192 g cm? 3 less than the anhydrous form of this melt at the same P and T. This density difference gives a partial molar volume of water in silicate melt of ～ 7 cm3 mol? 1, which is similar to previous studies at high pressure. The komatiite–fayalite liquids with 0 and 2 wt.% H2O, have extrapolated density crossovers with equilibrium liquidus olivine at 8 and 9 GPa respectively, but there is no crossover for the liquid with 5 wt.% H2O. These results are consistent with the hypothesis that dense hydrous melts could be gravitationally stable atop the 410 km discontinuity in the Earth. The results also support the notion that equilibrium liquidus olivine could float in an FeO-rich hydrous martian magma ocean. Extrapolation of the data suggests that FeO-rich hydrous melt could be negatively buoyant in the Earth's D″-region or atop the core–mantle-boundary (CMB), although experiments at higher pressure are needed to confirm this prediction.  相似文献   

3.
《Journal of Geodynamics》2010,49(3-5):247-252
Enceladus, one of Saturn's moons, shows significant volcanic activity identified by the Cassini spacecraft. The aim of the present study is to investigate – with the adaptation of mathematical tools used in geodynamics – the extent of tidal heating due to the mean motion resonance with Dione. For the purpose of calculations a two-layer model of Enceladus was used. The inner part of the model is a “rocky core” with a relative radius 0.55, while the outer part is composed of water ice. The results of model calculations show that the effective tidal heating is not uniformly distributed within Enceladus. It was found for the selected model of Enceladus, that the tidal heating is maximum within the depth interval (25–75) km. Due to the inhomogeneity within Enceladus, 85% of the tidal energy is generated in a volume that contains just 39% of its mass. In time intervals of 3.0 × 108 and 5.3 × 108 years the temperature increase in the relative depth range 0.70 ≤ r/aE ≤ 0.90 is approximately 270 and 370 K, respectively.  相似文献   

4.
《Marine pollution bulletin》2009,58(6-12):867-872
Sediment sampled from Taichung Harbor was mixed with local reservoir sediment at different weight ratios to prepare lightweight aggregate at 1050, 1100, and 1150 °C. A pressure of 3000 or 5000 psi was used to shape the powder mixtures into pellets before the heating processes. The results indicate that the leaching levels of trace metals from the lightweight aggregate samples are considerably reduced to levels less than Taiwan Environmental Protection Administration regulatory limits. Increasing final process temperature tends to reduce the bulk density and crushing intensity of lightweight aggregate with a concomitant increase in water sorption capability. Lightweight aggregate with the lowest bulk density, 0.49 g cm−3 for the 5000 psi sample, was obtained with the heating process to 1150 °C. Based on the X-ray absorption near edge structure results, FeSO4 decomposition with a concomitant release of SOx (x = 2, 3) is suggested to play an important role for the bloating process in present study.  相似文献   

5.
The Late Permian (260 Ma) Emeishan large igneous province of SW China contains numerous magmatic Fe–Ti oxide deposits. The Fe–Ti oxide deposits occur in the lower parts of evolved layered gabbroic intrusions which are spatially and temporally associated with A-type granitic rocks. The 260 Ma Panzhihua layered gabbroic intrusion hosts one of the largest magmatic Fe–Ti oxide deposits in China and is coeval with a peralkaline A-type granitic pluton. The granite has intruded the overlying Emeishan flood basalts and fed at least one dyke which erupted onto the surface producing columnar jointed trachytes. The presence of syenodiorite between the layered gabbro and granite is evidence for compositional evolution from mafic to intermediate to felsic rocks. The syenodiorites have intermediate to felsic composition with SiO2 = 61 to 65 wt.%, MgO = 0.27 to 0.6 wt.% and CaO = 1.0 to 2.5 wt.% as compared to the granite SiO2 = 65 to 72 wt.%, MgO = 0.1 to 0.4 wt.%, CaO = < 1.0 wt.%. Primitive-mantle-normalized incompatible element plots show corresponding reciprocal patterns between the mafic and felsic rocks. The chondrite-normalized REE patterns show Eu anomalies changing from > 1(Eu/Eu? = 1.1 to 2.6) in the gabbroic intrusion, to < 1 in the syenodiorite (Eu/Eu? = 0.75 to 0.83), granites and trachytes (Eu/Eu? = 0.55–0.87). Previously published εNd(T) values from clinopyroxenes (εNd(T) = + 1.1 to + 3.2) of the gabbroic intrusion match the whole-rock values of the syenodiorite (εNd(T) = + 2.1 to + 2.5), granite and trachyte (εNd(T) = + 2.2 to + 2.9), suggesting that all rock types originated from the same mantle source. MELTS and trace element modeling confirm that all rock types can be generated by fractional crystallization of high-Ti Emeishan basalt. The jump in SiO2 from the gabbro to the syenodiorite is attributed to the en masse crystallization of the Fe–Ti oxides. The geological and geochemical data indicate that fractional crystallization of a common parental magma produced the layered gabbroic intrusion and Fe–Ti oxide deposit, the syenodiorite, granites and trachyte of the Panzhihua region, which thus form a genetically related plutonic-hypabyssal-volcanic complex. Other granite–gabbro complexes in the region likely formed in a similar manner.  相似文献   

6.
Abundant dunite and harzbugite xenoliths are preserved in Early Cretaceous high-Mg# [63–67, where Mg# = molar 100 × Mg/(Mg + Fetot)] diorite intrusions from western Shandong in the North China Craton (NCC). Dunite and some harzburgite xenoliths typically preserve areas of orthopyroxenite (sometimes accompanied by phlogopite) either as veins or as zones surrounding chromite grains. Harzburgite is chiefly composed of olivine, orthopyroxene, minor clinopyroxene and chromian-spinel. High Mg#'s (averaging 91.4) and depletions in Al2O3 and CaO (averaging 0.52 wt.% and 0.29 wt.%, respectively) in harzburgite and dunite xenoliths suggest that they are residues formed by large degrees of polybaric melting. However, olivines and orthopyroxenes from dunite xenoliths spatially associated with orthopyroxenite display lower Mg#'s (i.e., 82–87 and 83–89, respectively), suggesting that an adakitic melt–peridotite reaction has taken place. This is consistent with the production of veined orthopyroxene or orthopyroxene + phlogopite in dunite and some harzburgite xenoliths in response to the introduction of adakitic melt into the previously depleted lithospheric mantle (i.e., harzburgite and dunite xenoliths). The presence of orthopyroxene in veins or as a zones surrounding chromite in peridotite xenoliths is thought to be representative of adakitic melt metasomatism. The dunite and harzbugite xenoliths are relatively rich in light rare earth elements (LREEs) and large ion lithophile elements (LILEs), poor in heavy rare earth elements (HREEs) and high field strength elements (HFSEs), and lack Eu anomalies on chondrite normalized trace element diagrams. The initial 87Sr/86Sr ratios and εNd(t) values for the xenoliths range from 0.7058 to 0.7212 and + 0.18 to ? 19.59, respectively. Taken together, these features, combined with the strong depletion in HFSE and the existence of Archean inherited zircons in the host rocks, suggest that the adakitic melt was derived from the partial melting of early Mesozoic delaminated lower continental crust. The interaction of the adakitic melt with peridotite is responsible for the high-Mg# character of the early Cretaceous diorites in western Shandong.  相似文献   

7.
We report volatile (H2O, CO2, F, S, Cl) and trace element data for submarine alkalic basalt glasses from the three youngest Samoan volcanoes, Ta'u, Malumalu and Vailulu'u. Most samples are visibly sulfide saturated, so have likely lost some S during fractionation. Cl / K ratios (0.04–0.15) extend to higher values than pristine MORBs, but are suspected to be partly due to source differences since Cl / K roughly varies as a function of 87Sr / 86Sr. There are no resolvable differences in the relative enrichment of F among sources, and compatibility of F during mantle melting is established to be nearly identical to Nd. Shallow degassing has affected CO2 in all samples, and H2O only in the most shallowly erupted samples from Vailulu'u. Absolute water contents are high for Samoa (0.63–1.50 wt.%), but relative enrichment of water compared to equally incompatible trace elements (Ce, La) is low and falls entirely below normal MORB values. H2O / Ce (58–157) and H2O / La (120–350) correlate inversely with 87Sr / 86Sr compositions (0.7045–0.7089). This leads us to believe that, because of very fast diffusion of hydrogen in mantle minerals, recycled lithospheric material with high initial water and trace element content will lose water to the drier ambient mantle during storage within the inner Earth. The net result is the counter-intuitive appearance of greater dehydration with greater mantle enrichment. We expect that subducted slabs will experience a two-stage dehydration history, first within subduction zones and then in the ambient mantle during long-term convective mixing.  相似文献   

8.
Outcrops of the Cretaceous Upper sandstone formation some 375 km to the East of Addis Ababa on the motor Highway to Harar was paleomagnetically investigated. About seventy core samples were collected at various stratigraphic levels from 250–300 meters thick sedimentary formation. After standard sample preparations in the laboratory the resulting specimens were subjected to routine paleomagnetic demagnetization protocol. In the first steps of demagnetizations process the recent and viscous magnetizations were removed by heating until a temperature of level of 300 °C. Further demagnetization of the samples resulted in the isolation of the final magnetization with stable line segments that is directed towards the origin, which is interpreted as Characteristic Remanent Magnetization (ChRM). Rock – magnetic experiments have identified goethite (αFeOOH), hematite (αFe2O3), detritial hematite, and magnetite as the magnetic mineral phases carrying the remanence. The ChRM identified resulted in an average value of (Ds = 0.5°, Is = ?0.7°, α95 = 4.3°, N = 34) for the red sandstones while an average value of (Ds = 335.8°, Is = ?31.8°, α95 = 4.7°, N = 14) for the limestone intercalations. The former ChRM in the red sandstone is determined to be secondary while the latter ChRM is known to be primary. Comparison of these directional results and their pole equivalents with the African plate Apparent Polar Wander Path curve established by Besse and Courtillot (2003) give ages of between 115–130 Million years for the limestone intercalation and ages of 30 million years for red sandstone unit. These are interpreted respectively as estimates of the age of deposition and a later remagnetization respectively.  相似文献   

9.
Equivalent dose (De) values were measured by using medium aliquots of different grain size quartz fractions of five lakeshore sediments from the arid region of north China. There are two different relationships between De values and grain sizes of these five samples. The first relationship is that the De values obtained from various grain sizes are in agreement within 1 delta errors. The second relationship is that De values are similar to each other for fractions between 125 and 300 μm, while the De value of the 63–90 μm fraction is 40～55% smaller than others. For example, the De values obtained for sample #3 are 20.15 ± 1.19 Gy, 19.80 ± 0.83 Gy and 20.93 ± 1.06 Gy for fractions of 90–125, 125–150 and 250–300 μm respectively, but are 10.79 ± 0.84 Gy for the 63–90 μm fraction. The second relationship can't be interpreted by previous studies of both dosimetry and heterogeneous bleaching. It is deduced for sample #2, #3 and #6 that fine particles (<90 μm) intruded after the dominant sedimentation. Comparison of OSL ages from different grain size fractions of sample #2 with a radiocarbon age from the same lithologic layer supports that fractions coarser than 125 μm yield more reliable burial ages, while the fraction finer than 90 μm yields underestimated ages for some lakeshore sediments from this arid region.  相似文献   

10.
Drinking water wells indiscriminatingly placed adjacent to fecal contaminated surface water represents a significant but difficult to quantify health risk. Here we seek to understand mechanisms that limit the contamination extent by scaling up bacterial transport results from the laboratory to the field in a well constrained setting. Three pulses of Escherichia coli originating during the early monsoon from a freshly excavated pond receiving latrine effluent in Bangladesh were monitored in 6 wells and modeled with a two-dimensional (2-D) flow and transport model conditioned with measured hydraulic heads. The modeling was performed assuming three different modes of interaction of E. coli with aquifer sands: (1) irreversible attachment only (best-fit ki = 7.6 day−1); (2) reversible attachment only (ka = 10.5 and kd = 0.2 day−1); and (3) a combination of reversible and irreversible modes of attachment (ka = 60, kd = 7.6, ki = 5.2 day−1). Only the third approach adequately reproduced the observed temporal and spatial distribution of E. coli, including a 4-log10 lateral removal distance of ∼9 m. In saturated column experiments, carried out using aquifer sand from the field site, a combination of reversible and irreversible attachment was also required to reproduce the observed breakthrough curves and E. coli retention profiles within the laboratory columns. Applying the laboratory-measured kinetic parameters to the 2-D calibrated flow model of the field site underestimates the observed 4-log10 lateral removal distance by less than a factor of two. This is promising for predicting field scale transport from laboratory experiments.  相似文献   

11.
  相似文献   

12.
The single backscattering model was used to estimate total attenuation of coda waves (Qc) of local earthquakes recorded on eight seismological stations in the complex area of the western continental Croatia. We estimated Q0 and n, parameters of the frequency dependent coda-Q using the relation Qc = Q0fn. Lapse time dependence of these parameters was studied using a constant 30 s long time window that was slid along the coda of seismograms. Obtained Qc were distributed into classes according to their lapse time, tL. For tL = 20–50 s we estimated Q0 = 45–184 and n = 0.49–0.94, and for tL = 60–100 s we obtained Q0 = 119–316 and n = 0.37–0.82. There is a tendency of decrease of parameter n with increasing Q0, and vice versa. The rates of change of both Q0 and n seem to decrease for lapse times larger than 50–80 s, indicating an alteration in rock properties controlling coda attenuation at depths of about 100–160 km. A very good correlation was found between the frequency dependence parameter n and the Moho depths for lapse times of 50, 60 and 70 s.  相似文献   

13.
We report observations of seasonal and local time variation of the averaged electron and iron concentrations, as well as simultaneous measurements of the two species, above the Arecibo Observatory (18.35°N, 66.75°N), Puerto Rico. The average Fe profile between 21:00 and 24:00 LT has a single peak at about 85 km with the exception of the summer when an additional peak exists at about 95 km. The higher Fe peak in the summer is correlated with higher electron concentrations in this season. The three nights of simultaneous measurements of electron and iron concentrations show that narrow layers of Fe and electrons are well correlated. Comparison of the climatological and simultaneous Fe and electron data suggests that recombination of Fe+ plays an important role in determining the Fe profile in the upper part of the Fe layer. Above 93 km, the Fe concentration appears to increase after sunset if the electron concentration exceeds about 4000 electrons cm−3. The average rate of Fe production is about 0.1 atom cm−3 s−1 for all seasons at 100 km in the early evening hours. A chemical model reveals that the concentration of Fe+ must be 50–80% of the total ionization over Arecibo for typical equinox conditions to explain the observed rate of Fe production. These high relative Fe+ concentrations are consistent with in situ observations that Fe+ is usually the dominant ion in sporadic E layers in the nighttime lower E region. This suggests that the source of Fe+ is provided by sporadic E layers descending over Arecibo after sunset. The Fe density between 80 and 85 km decreases during the night, for all seasons. This is attributed to the formation of stable molecular Fe species, such as FeOH, due to the increase in O3 and decrease in atomic O and H during the night at these altitudes.  相似文献   

14.
The aggregate shear wave velocities of MgO (periclase) have been determined throughout Earth's lower mantle pressure regime approaching 130 GPa using Brillouin spectroscopy in conjunction with synchrotron X-ray diffraction technique in a diamond anvil cell apparatus. We found that the extrapolations of the high-pressure shear wave velocities and shear moduli to ambient pressure are highly consistent with earlier studies. However, the measurements over a wide pressure range revealed that the pressure derivative of the shear modulus (dG/dP = G0′) of MgO is 1.92(2), which is distinctly lower than that of previous lower-pressure experiments. Compared with the previous results on (Mg,Fe)O ferropericlase, there is no clear correlation between iron content and G0′. We calculate that the shear wave velocity profile of lower mantle along the adiabatic geotherm applied by the lower G0′ value of periclase can remarkably well reproduce the global seismological 1-D velocity profile model with uniform composition model. The best-fitting result indicates the possibility of a lower mantle mineralogy with ~ 92 vol.% silicate perovskite phase, implying that the bulk composition of lower mantle is likely not to be pyrolitic but more chondritic. The present acoustic measurements performed over the large pressure range have thus led us to a better understanding of compositional model of the Earth's lower mantle.  相似文献   

15.
Two accurately calibrated superconducting gravimeters (SGs) provide high quality tidal gravity records in three central European stations: C025 in Vienna and at Conrad observatory (A) and OSG050 in Pecný (CZ). To correct the tidal gravity factors from ocean loading effects we compared the load vectors from different ocean tides models (OTMs) computed with different software: OLFG/OLMP by the Free Ocean Tides Loading Provider (FLP), ICET and NLOADF. Even with the recent OTMs the mass conservation is critical but the methods used to correct the mass imbalance agree within 0.1 nm/s2. Although the different software agrees, FLP probably provides more accurate computations as this software has been optimised. For our final computation we used the mean load vector computed by FLP for 8 OTMs (CSR4, NAO99, GOT00, TPX07, FES04, DTU10, EOT11a and HAMTIDE). The corrected tidal factors of the 3 stations agree better than 0.04% in amplitude and 0.02° in phase. Considering the weighted mean of the three stations we get for O1 δc = 1.1535 ± 0.0001, for K1 δc = 1.1352 ± 0.0003 and for M2 δc = 1.1621 ± 0.0003. These values confirm previous ones obtained with 16 European stations. The theoretical body tides model DDW99/NH provides the best agreement for M2 (1.1620) and MATH01/NH for O1 (1.1540) and K1 (1.1350). The largest discrepancy is for O1 (0.05%). The corrected phase αc does not differ significantly from zero except for K1 and S2. The calibrations of the two SG's are consistent within 0.025% and agree with Strasbourg results within 0.05%.  相似文献   

16.
The geochemical characteristics of mildly alkalic basalts (24–25 Ma) erupted in the southeastern Kerguelen Archipelago are considered to represent the best estimate for the composition of the enriched Kerguelen plume end-member. A recent study of picrites and high-MgO basalts from this part of the archipelago highlighted the Pb and Hf isotopic variations and suggested the presence of mantle heterogeneities within the Kerguelen plume itself. We present new helium and neon isotopic compositions for olivines from these picrites and high-MgO basalts (6–17 wt.% MgO) both to constrain the enriched composition of the Kerguelen plume and to determine the origin of isotopic heterogeneities involved in the genesis of Kerguelen plume-related basalts. The olivine phenocrysts have extremely variable 4He / 3He compositions between MORB and primitive values observed in OIB (∼90,000 to 40,000; i.e., R / Ra ∼8 to 18) and they show primitive neon isotopic ratios (average 21Ne / 21Neext ∼0.044). The neon isotopic systematics and the 4He / 3He ratios that are lower than MORB values for the Kerguelen basalts clearly suggest that the Kerguelen hotspot belongs to the family of primitive hotspots, such as Iceland and Hawaii. The rare gas signature for the Kerguelen samples, intermediate between MORB and solar, is apparently inconsistent with mixing of a primitive component with a MORB-like source, but may result from sampling a heterogeneous part of the mantle with solar 3He / 22Ne and with a higher (U, Th) / 3He ratio compared to typically high R / Ra hotspot basalts such as those from Iceland and Hawaii.  相似文献   

17.
Daihai Lake is one of the largest lakes in the mid-latitude of northern China. Previous environmental change investigations using the sediments from the lake have been mainly focused on the last 13 ka. In 2006, we drilled an 80-m borehole on the southwest coast of the lake. Here we report the results of initial optical dating of the upper 22-m sediments from the core. Most of the samples allow separation of the 4–11 μm fine-grained and 45–63 μm medium-grained quartz, both of which were used for equivalent dose (De) determination. Dose recovery test experiments with the single-aliquot regeneration-dose (SAR) protocol indicate that a preheat at 240 °C for 10 s combined with a cut-heat of 240 °C is suitable for these samples. The De values show marked discrepancy between the two grain size fractions with the fine-grained quartz yielding up to over 50% higher De values than the medium ones for some samples. We consider the OSL ages for the samples from upper ～10 m to be overestimated. The main cause of the overestimation is attributed to the incomplete bleaching of the sediment grains at deposition. The OSL ages for the lower part of the sequence are considered to be reasonable age estimates which provide useful temporal constrains on the deposition of the sediments for the period of 20–40 ka.  相似文献   

18.
Volume measurements for magnesiowüstite (Mg0.6Fe0.4)O, were carried out up to pressures of 10.1 GPa in the temperature range 300–1273 K, using energy-dispersive synchrotron X-ray diffraction. These data allow reliable determination of the temperature dependence of the bulk modulus and good constraint on the thermal expansitivity at ambient pressure which was previously not known for magnesiowüstite. From these data, thermal and elastic parameters were derived from various approaches based on the Birch–Murnaghan equation of state (EOS) and on the relevant thermodynamic relations. The results from three different equations of state are remarkably consistent. With (∂KT/∂P)T fixed at 4, we obtained K0=158(2) GPa, (∂KT/∂T)P=−0.029(3) GPa K−1, (∂KT/∂T)V=−3.9(±2.3)×10−3 GPa K−1, and αT=3.45(18)×10−5+1.14(28)×10−8T. The K0, (∂KT/∂T)P, and (∂KT/∂T)V values are in agreement with those of Fei et al. (1992) and are similar to previously determined values for MgO. The zero pressure thermal expansitivity of (Mg0.6Fe0.4)O is found to be similar to that for MgO (Suzuki, 1975). These results indicate that, for the compositional range x=0–0.4 in (Mg1−xFex)O, the thermal and elastic properties of magnesiowüstite exhibit a dependence on the iron content that is negligibly small, within uncertainties of the experiments. They are consequently insensitive to the Fe–Mg partitioning between (Mg, Fe)SiO3 perovskite and magnesiowüstite when applied to compositional models of the lower mantle. With the assumption that (Mg0.6Fe0.4)O is a Debye-like solid, a modified equation of heat capacity at constant pressure is proposed and thermodynamic properties of geophysically importance are calculated and tabulated at high temperatures.  相似文献   

19.
Evapotranspiration (LE) is an important factor for monitoring crops, water requirements, and water consumption at local and regional scale. In this paper, we applied the semi-empirical model to estimate the daily latent heat flux (LEd = Rnd + A − B(Ts − Ta)). LEd has been estimated using satellite images (Thematic Mapper sensor) and a local dataset (incoming and outgoing short- and long-wave radiation) measured during three years. We first estimated the daily net Radiation (Rnd) from a linear equation derived from the instantaneous net Radiation (Rnd = CRni + D). Subsequently, coefficients A and B have been estimated for two different cover vegetations (pasture and soybean). For each vegetation cover, an error analysis combining Rnd, A, B, and surface and air temperatures has been calculated. Results showed that Rnd had good performance (nonbias and low RMSE). LEd errors for pasture and soybean were ±28 W m−2 and ±40 W m−2 respectively.  相似文献   

20.
Hot springs in the Marsyandi Valley, Nepal, vent CO2 sourced from metamorphic fluids that mix with shallow groundwaters before degassing near the Earth's surface. The δ13C of spring waters ranges up to + 13‰, while that of the coexisting free gas phase is close to ? 4‰. Empirical and thermodynamic modelling of this isotopic fractionation suggests > 97 ± 1% CO2 degassing. The calculated minimum total CO2 degassing in the Marsyandi catchment is 5.4 × 109 mol/yr from a Cl-based estimate of the spring water discharge to the Marsyandi River and the fraction of CO2 degassed. Extrapolated to the whole of the Himalayas, this implies a probable minimum metamorphic CO2 flux of 0.9 × 1012 mol/yr, or ～ 13% of solid Earth CO2 degassing. The calculated flux is a factor of three greater than the estimated CO2 drawdown by silicate weathering in the Himalayas. Himalayan metamorphic degassing contributes a significant fraction of the global solid Earth CO2 flux and implies that metamorphism may cause changes in long-term climate that oppose those resulting from the orogenic forcing of chemical weatherability.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号