共查询到20条相似文献，搜索用时 31 毫秒
1.
Facies, geometry and key internal stratigraphic surfaces from eight Cretaceous and Eocene clastic shoreline tongues have been documented. The regressive parts of all the studied tongues represent storm‐wave influenced strandplains, deltas or fan‐deltas, and the regressive shoreline trajectories varied from descending to ascending. The transgressive parts of the tongues are dominated by either estuarine or coastal‐plain deposits. The distance from the coeval, up‐dip non‐marine deposits to the basinward pinchout of amalgamated shoreface sandstones, measured along depositional dip, is here termed the sand pinchout distance. The study shows that the angle of regressive‐to‐transgressive turnaround (defined by the angle between the regressive and subsequent transgressive shoreline trajectories) and the process regime during turnaround largely control the sand‐pinchout distance. The amount of transgressive erosion can also partly control the pinchout distance, but this parameter was comparable for the different examples presented here. If the type of depositional system at turnaround and the depth of transgressive erosion are constant, small angles of turnaround are associated with large pinchout distances, whereas larger angles of turnaround result in smaller pinchout distances. The model developed allows sand‐pinchout distance to be predicted, using data for the landward parts of shoreline tongues. The dataset also shows that steeply rising (aggrading) shoreline trajectories tend to produce more heterolithic sandstone tongues than those formed by lower‐angle trajectories. 相似文献
2.
Marginal marine deposits of the John Henry Member, Upper Cretaceous Straight Cliffs Formation, were deposited within a moderately high accommodation and high sediment supply setting that facilitated preservation of both transgressive and regressive marginal marine deposits. Complete transgressive–regressive cycles, comprising barrier island lagoonal transgressive deposits interfingered with regressive shoreface facies, are distinguished based on their internal facies architecture and bounding surfaces. Two main types of boundaries occur between the transgressive and regressive portions of each cycle: (i) surfaces that record the maximum regression and onset of transgression (bounding surface A); and (ii) surfaces that place deeper facies on top of shallower facies (bounding surface B). The base of a transgressive facies (bounding surface A) is defined by a process change from wave‐dominated to tide‐dominated facies, or a coaly/shelly interval indicating a shift from a regressive to a transgressive regime. The surface recording such a process change can be erosional or non‐erosive and conformable. A shift to deeper facies occurs at the base of regressive shoreface deposits along both flooding surfaces and wave ravinement surfaces (bounding surface B). These two main bounding surfaces and their subtypes generate three distinct transgressive – regressive cycle architectures: (i) tabular, shoaling‐upward marine parasequences that are bounded by flooding surfaces; (ii) transgressive and regressive unit wedges that thin basinward and landward, respectively; and (iii) tabular, transgressive lagoonal shales with intervening regressive coaly intervals. The preservation of transgressive facies under moderately high accommodation and sediment supply conditions greatly affects stratigraphic architecture of transgressive–regressive cycles. Acknowledging variation in transgressive–regressive cycles, and recognizing transgressive successions that correlate to flooding surfaces basinward, are both critical to achieving an accurate sequence stratigraphic interpretation of high‐frequency cycles. 相似文献
3.
《Sedimentology》2018,65(4):1132-1169
Clinoform surfaces are routinely used to mark transitions from shallow waters to deep basins. This concept represents a valuable tool for screening potential reservoir intervals in frontier basins where limited data are available. Variations in the character of clinoform geometries and shoreline and shelf‐edge trajectories are indicators of a range of different factors, such as palaeobathymetry, changes in relative sea‐level and sediment supply. Applications of conceptual and generalized models might, however, lead to erroneous assumptions about the supply of coarse‐grained material to the delta front and basin when superficial similarities between clinoform geometries are not treated holistically. The present study examines the mudstone‐dominated Middle Triassic Kobbe Formation – a potential hydrocarbon reservoir interval in the Barents Sea, where prodeltaic to deltaic deposits can be examined in cores, well logs and two‐dimensional and three‐dimensional seismic data. Despite pronounced acoustic impedance contrast to the surrounding shale, channel belt networks are not observed close to the platform edge in seismic datasets, even at maximum regressive stages. However, sub‐seismic prodeltaic deposits observed on the shallow platform indicate that prodeltaic deposits were sourced directly from the delta plain. Clinoform surfaces with different geometries and scale are observed basinward of the palaeoplatform edge of underlying progradational sequences, correlative to mudstone‐dominated prodeltaic core sections. Results indicate that platform‐edge deltas developed at discrete sites in the basin due to normal regression, but the positions of these deltas are not directly relatable to variations in clinoform geometries. Transitions from third‐order to fourth‐order clinoform geometries record discrete transgressive–regressive cycles but are not necessarily good indicators of sandstone deposition. Because of prolonged periods with high accommodation, channel avulsions were frequent and only very fine‐grained sandstone was deposited in heterolithic units at the delta front. Sandstones with good reservoir properties are predominantly found along basin margins. 相似文献
4.
《Boreas: An International Journal of Quaternary Research》2018,47(4):973-1002
This study presents a synthesis of the geomorphology, facies variability and depositional architecture of ice‐marginal deltas affected by rapid lake‐level change. The integration of digital elevation models, outcrop, borehole, ground‐penetrating radar and high‐resolution shear‐wave seismic data allows for a comprehensive analysis of these delta systems and provides information about the distinct types of deltaic facies and geometries generated under different lake‐level trends. The exposed delta sediments record mainly the phase of maximum lake level and subsequent lake drainage. The stair‐stepped profiles of the delta systems reflect the progressive basinward lobe deposition during forced regression when the lakes successively drained. Depending on the rate and magnitude of lake‐level fall, fan‐shaped, lobate or more digitate tongue‐like delta morphologies developed. Deposits of the stair‐stepped transgressive delta bodies are buried, downlapped and onlapped by the younger forced regressive deposits. The delta styles comprise both Gilbert‐type deltas and shoal‐water deltas. The sedimentary facies of the steep Gilbert‐type delta foresets include a wide range of gravity‐flow deposits. Delta deposits of the forced‐regressive phase are commonly dominated by coarse‐grained debrisflow deposits, indicating strong upslope erosion and cannibalization of older delta deposits. Deposits of supercritical turbidity currents are particularly common in sand‐rich Gilbert‐type deltas that formed during slow rises in lake level and during highstands. Foreset beds consist typically of laterally and vertically stacked deposits of antidunes and cyclic steps. The trigger mechanisms for these supercritical turbidity currents were both hyperpycnal meltwater flows and slope‐failure events. Shoal‐water deltas formed at low water depths during both low rates of lake‐level rise and forced regression. Deposition occurred from tractional flows. Transgressive mouthbars form laterally extensive sand‐rich delta bodies with a digitate, multi‐tongue morphology. In contrast, forced regressive gravelly shoal‐water deltas show a high dispersion of flow directions and form laterally overlapping delta lobes. Deformation structures in the forced‐regressive ice‐marginal deltas are mainly extensional features, including normal faults, small graben or half‐graben structures and shear‐deformation bands, which are related to gravitational delta tectonics, postglacial faulting during glacial‐isostatic adjustment, and crestal collapse above salt domes. A neotectonic component cannot be ruled out in some cases. 相似文献
5.
《Sedimentology》2018,65(1):62-95
Despite advances in estuarine facies models, ancient bayhead delta deposits are not widely recognized or utilized, and their facies characteristics are poorly documented. Sedimentology of three well‐exposed, bayhead delta deposits within the well‐known stratigraphic framework of the Book Cliffs, Utah, and comparison to modern bayhead deltas provide insight into their variability, and a model for reservoir prediction. Bayhead deltas develop at the innermost part of bays within wave‐dominated and mixed‐energy estuaries on transgressive coastlines. The deposits of these deltas are valuable because they record the high‐frequency turnaround from transgression to regression; in turn, this delineates the long‐term transgression trajectory and informs reservoir prediction. This study uses outcrop data and synthesis of modern bayhead delta characteristics to define criteria for bayhead delta recognition, develop a detailed facies model and highlight their utility in a regional context. The following criteria for bayhead delta identification are proposed herein: (i) overall coarsening‐up pattern; (ii) small‐scale clinoform (5 to 15 m height; 100 to 1000 m length) showing a down‐clinoform decrease in grain size and palaeocurrent energy; (iii) increasing abundance of mud interbeds towards the clinoform toe; (iv) basinward‐directed palaeocurrents generated mainly by fluvial input with strong tidal overprint; (v) greatest tidal influence in the intertidal zone of the inactive delta front and better preservation of turbidites at clinoform toes; (vi) brackish trace and body fossils; and (vii) position within an overall backstepping stratigraphic succession. Ancient bayhead deltas described in this study are situated within a moderately rising to flatly rising transgressive interval over a 300 km transect. Steeply rising transgressive trajectories sequester sandy, thicker, better connected transgressive deposits in the inner part of the estuary where bayhead deltas tend to stack vertically. Flatter transgressive trajectories sequester sand in disparate, disconnected estuarine sandstone bodies with partial preservation of bayhead deltas. Proposed criteria aid recognition of bayhead delta deposits in other basins to reconstruct transgressive shoreline trajectories that inform reservoir models and volumetrics. 相似文献
6.
Sand-rich shoreline tongues are common features of the stratigraphic record, and many of them are important petroleum reservoirs. The basinward extent of such shallow-marine deposits is highly variable, from a few to a few hundred kilometres. Although indirect information exists, the question as to what parameters actually cause this variation and their relative importance has not been addressed. Here, it is argued that the sand pinchout distance of regressive-to-transgressive shoreline tongues is controlled by (1) the type of depositional system (e.g. fluvial-, tide- or wave-dominated); (2) the regressive and transgressive shoreline trajectories; and (3) the depth of transgressive erosion. In contrast to the shoreline trajectory, the angle of turnaround, defined by the pathway taken by the regressive and subsequent transgressive shorelines, is simple to measure and gives a first approximation of the pinchout distance. For otherwise equal systems, the pinchout distance is inversely related to the angle of turnaround. 相似文献
7.
H. D. SINCLAIR 《Sedimentology》1993,40(5):955-978
High resolution stratigraphical analysis divides a rock succession into the basic genetic units of stratigraphy which are here termed small scale stratigraphical cycles. Each cycle records the sedimentological response to an episode of shallowing and deepening. Assuming that these changes in water depth reflect changes in the shoreline position, they can be considered as regressive/transgressive episodes. Each cycle comprises a regressive and transgressive facies tract which will be variably proportioned; in some examples a facies tract may only be represented by a hiatal surface of no deposition, erosion and/or bypass. In the Annot Sandstones of south-east France, variations in facies types, proportions and associations can be demonstrated both laterally and vertically through the succession. First, it is demonstrated that facies variations occur within regressive or transgressive facies tracts as a function of the stratigraphical stacking pattern of the cycles (i.e. landward, vertical or seaward stacked); this is termed ‘vertical facies differentiation’. Second, the proportions of facies tracts and their constituent facies types within an individual cycle vary between more landward and more seaward palaeogeographical locations; this is termed ‘lateral facies differentiation'. The upper Eocene/lower Oligocene Annot sandstones outcrop in the Maritime Alps of south-east France, within the thin skinned outer fold and thrust belt of the Alpine arc. The sandstones are well exposed in the area of the Col de la Cayolle on the north-west margin of the Argentera Massif, where lithostratigraphical correlations are possible over 3·5 km in a NNW/SSE direction, perpendicular to the edge of the depositional basin. Traditionally, these outcrops have been interpreted as deep marine turbidite lobe sediments; this study reflects a significant reinterpretation of this succession as having been deposited in a shallow marine environment. Seven sedimentary sections were measured through the succession, which is divided into 10 small scale stratigraphical cycles. These cycles are described in terms of eight facies which are separated into their transgressive or regressive facies tracts. In eight of the 10 cycles, the regressive facies tracts reflect the progradation of storm influenced braid deltas over shelf muds and silts. In two of the 10 cycles, the regressive facies tracts reflect barrier inlet and wash-over sands interfingering with back barrier deposits. These latter two cycles are located within landward stepping cycle sets; this is an example of vertical facies differentiation. Transgressive facies tracts locally reworked the upper surface of the regressive facies tract and also comprise barrier and back barrier deposits. The facies succession within each cycle varies according to its position with respect to the palaeoshoreline. The more landward portion of an individual cycle comprises a deltaic shoaling upward succession, culminating in coarse distributary channel conglomerates, overlain by a transgressive barrier/inlet system with extensive back barrier deposits. Beyond the delta front, the more seaward equivalent of individual cycles comprises an erosive base, with aggradational massive pebbly sandstones sitting directly upon offshore heterolithics; these sandstones are interpreted as hyperconcentrated fluvial efflux into the nearshore environment. This grades upward into offshore heterolithics and graded storm deposits representing the products of ravinement, which are then overlain by shelf mudstones. In summary, the more landward portions of cycles preserve predominantly regressive facies tracts, whereas the more seaward portions preserve aggradational to retrogradational strata of the transgressive facies tract; this is an example of lateral facies differentiation. 相似文献
8.
应用800多口钻孔及文献资料,讨论了中国沿海滦河扇三角洲、长江三角洲和珠江三角洲及钱塘江河口湾4个地区的下切河谷体系,这些皆为丰沙河流形成的河口三角洲。这些河口三角洲地区的下切河谷为长形或扇形,长数十至数百千米,宽数十千米,深40～90 m。河口三角洲地区的下切河谷相序可分为4种类型,即FS-Ⅰ,FS-Ⅱ,FS-Ⅲ和FS-Ⅵ。可以将这4类相序自海向陆排成一个理想序列：FS-Ⅰ位于海岸线附近,FS-Ⅳ位于河口三角洲的顶部,显示海的影响逐渐减弱,陆相作用逐渐增强。下切河谷层序可分为海侵和海退序列。海侵序列的厚度占下切河谷层序的50％以上,体积占60％～70％。海侵序列是在海平面上升过程中,溯源堆积依次叠置而成的,其下部的河床相是在溯源堆积能到达、而涨潮流未能到达的下游河段产生的,往往不含海相微体化石和潮汐沉积构造。在海侵序列中未见区域上可对比的侵蚀面,表明冰后期海平面上升速率的变化、甚至小幅下降也未留下统一的侵蚀记录。下切河谷中的海退序列由河口湾充填及三角洲进积而成,其进程是各不相同的：长江古河口湾先被强潮河口湾相、后由三角洲相所充填,河口湾也经历了由强潮型向中潮型的转变;滦河扇三角洲和珠江三角洲,其古河口湾则被河流相和三角洲相所充填;钱塘江河口湾正被强潮河口湾相所充填。 相似文献
9.
MASSIMO ZECCHIN DARIO CIVILE MAURO CAFFAU GIOVANNI STURIALE CESARE RODA 《Sedimentology》2011,58(2):442-477
The Cutro Terrace is a mixed marine to continental terrace, where deposits up to 15 m thick discontinuously crop out in an area extending for ca 360 km2 near Crotone (southern Italy). The terrace represents the oldest and highest terrace of the Crotone area, and it has been ascribed to marine isotope stage 7 (ca 200 kyr bp ). Detailed facies and sequence‐stratigraphic analyses of the terrace deposits allow the recognition of a suite of depositional environments ranging from middle shelf to fluvial, and of two stacked transgressive–regressive cycles (Cutro 1 and Cutro 2) bounded by ravinement surfaces and by surfaces of sub‐aerial exposure. In particular, carbonate sedimentation, consisting of algal build‐ups and biocalcarenites, characterizes the Cutro 1 cycle in the southern sector of the terrace, and passes into shoreface and foreshore sandstones and calcarenites towards the north‐west. The Cutro 2 cycle is mostly siliciclastic and consists of shoreface, lagoon‐estuarine, fluvial channel fill, floodplain and lacustrine deposits. The Cutro 1 cycle is characterized by very thin transgressive marine strata, represented by lags and shell beds upon a ravinement surface, and thicker regressive deposits. Moreover, the cycle appears foreshortened basinwards, which suggests that the accumulation of its distal and upper part occurred during forced regressive conditions. The Cutro 2 cycle displays a marked aggradational component of transgressive to highstand paralic and continental deposits, in places strongly influenced by local physiography, whereas forced regressive sediments are absent and probably accumulated further basinwards. The maximum flooding shoreline of the second cycle is translated ca 15 km basinward with respect to that of the first cycle, and this reflects a long‐term regressive trend mostly driven by regional uplift. The stratigraphic architecture of the Cutro Terrace deposits is the result of the interplay between regional uplift and high amplitude, Late Quaternary glacio‐eustatic changes. In particular, rapid transgressions, linked to glacio‐eustatic rises that outpaced regional uplift, favoured the accumulation of thin transgressive marine strata at the base of the two cycles. In contrast, the combined effect of glacio‐eustatic falls and regional uplift led to high‐magnitude forced regressions. The superposition of the two cycles was favoured by a relatively flat topography, which allowed relatively complete preservation of stratal geometries that record large shoreline displacements during transgression and regression. The absence of a palaeo‐coastal cliff at the inner margin of the terrace supports this interpretation. The Cutro Terrace provides a case study of sequence architecture developed in uplifting settings and controlled by high‐amplitude glacio‐eustatic changes. This case study also demonstrates how the interplay of relative sea‐level change, sediment supply and physiography may determine either the superposition of cycles forming a single terrace or the formation of a staircase of terraces each recording an individual eustatic pulse. 相似文献
10.
Strata of the Bardas Blancas Formation (lower Toarcian–lower Bajocian) are exposed in northern Neuquén Basin. Five sections have been studied in this work. Shoreface/delta front to offshore deposits predominate in four of the sections studied exhibiting a high abundance of hummocky cross-stratified, horizontally bedded and massive sandstones, as well as massive and laminated mudstones. Shell beds and trace fossils of the mixed Skolithos-Cruziana ichnofacies appear in sandstone beds, being related with storm event deposition. Gravel deposits are frequent in only one of these sections, with planar cross-stratified, normal graded and massive orthoconglomerates characterizing fan deltas interstratified with shoreface facies. A fifth outcrop exhibiting planar cross-stratified orthoconglomerates, pebbly sandstones with low-angle stratification and laminated mudstones have been interpreted as fluvial channel deposits and overbank facies. The analysis of the vertical distribution of facies and the recognition of stratigraphic surfaces in two sections in Río Potimalal area let recognized four transgressive–regressive sequences. Forced regressive events are recognized in the regressive intervals. Comparison of vertical distribution of facies also shows differences in thickness in the lower interval among the sections studied. This would be related to variations in accommodation space by previous half-graben structures. The succession shows a retrogradational arrangement of facies related with a widespread transgressive period. Lateral variation of facies let recognize the deepening of the basin through the southwest. 相似文献
11.
Sarah K. Schultz James A. MacEachern Octavian Catuneanu Shahin E. Dashtgard 《Sedimentology》2020,67(6):2974-3002
Variability in accommodation and sedimentation rates within a basin generates significant deviations in the along-strike stratal stacking patterns of systems tracts. This variability can lead to coeval depositional units that record the juxtaposition of transgressive (retrogradational) and regressive (progradational) stratal stacking patterns. In scenarios where transgressive and regressive units are deposited concurrently, challenges arise when attempting to correlate and place systems tracts into a sequence stratigraphic framework. In these scenarios, the maximum flooding surface records a high level of diachroneity, with the position of the surface variable throughout the stratigraphic column. In this study, Viking Formation (late Albian) deposits in the Western Canada Sedimentary Basin, central Alberta, Canada, preserve significant along-strike variability of palaeoshorelines that developed in response to autogenic processes as well as allogenic controls that were active during deposition. Specifically, structural reactivation of Precambrian basement structures during Viking deposition led to significant variability in depositional environments along the palaeoshoreline. The incremental basement reactivation of the Precambrian Snowbird Tectonic Zone influenced sedimentation patterns and the creation of anomalous zones of accommodation in localized areas of the basin. Across fault boundaries and within the anomalously thick strata, both progradational and retrogradational stacking patterns occur within broadly contemporaneous deposits, complicating the correlation of stratigraphic units. While the concomitant deposition of transgressive and regressive units has been documented in a number of modern marine analogues, the concept is rarely applied to ancient successions. By identifying along-strike variabilities in shoreline geometries and incorporating the autogenic and allogenic controls that were active during deposition, a more accurate sequence stratigraphic framework can be proposed. 相似文献
12.
《Sedimentary Geology》2006,183(1-2):1-13
Integrated sedimentological and micropaleontological (foraminifers and ostracods) analyses of two 55 m long borehole cores (S3 and S4) drilled in the subsurface of Lesina lagoon (Gargano promontory—Italy) has yielded a facies distribution characteristic of alluvial, coastal and shallow-marine sediments. Stratigraphic correlation between the two cores, based on strong similarity in facies distribution and AMS radiocarbon dates, indicates a Late Pleistocene to Holocene age of the sedimentary succession.Two main depositional sequences were deposited during the last 60-ky. These sequences display poor preservation of lowstand deposits and record two major transgressive pulses and subsequent sea-level highstands. The older sequence, unconformably overlying a pedogenized alluvial unit, consists of paralic and marine units (dated by AMS radiocarbon at about 45–50,000 years BP) that represent the landward migration of a barrier-lagoon system. These units are separated by a ravinement surface (RS1). Above these tansgressive deposits, highstand deposition is characterised by progradation of the coastal sediments.The younger sequence, overlying an unconformity of tectonic origin, is a 10 m-thick sedimentary body, consisting of fluvial channel sediments overlain by transgressive–regressive deposits of Holocene age. A ravinement surface (RS2), truncating the transgressive (lagoonal and back-barrier) deposits in core S4, indicates shoreface retreat and landward migration of the barrier/lagoon system. The overlying beach, lagoon and alluvial deposits are the result of mid-Holocene highstand sedimentation and coastal progradation. 相似文献
13.
The stratigraphy of the western Portugal on-shore Cretaceous record (western Iberian margin, Lusitanian Basin) is described, including formal units and a selection of informal units prevailing in the geological literature. This paper is a synthesis based on a review of previous works, but with an innovative emphasis on the interpretation of eustatic and tectonic controls. The sedimentary record is dominated by siliciclastics and comprises fluvial and deltaic coastal marine siliciclastic systems, as well as extensive deposits of shallow marine carbonate platforms, both open and rimmed. Several regional unconformities and transgressive/regressive cycles are identified and the allogenic controls interpreted, namely the geodynamic events along the boundaries of the Iberian plate. Above the Berriasian deposits belonging to the Upper Jurassic cycle, the five main unconformity-bounded units are: (1) upper Berriasian–lower Barremian, (2) upper Barremian–lower Aptian, (3) upper Aptian–uppermost Cenomanian, (4) mid lower Turonian–lower Campanian and (5) middle Campanian–Maastrichtian. These units show transgressive peaks in the lower Hauterivian, lower Aptian, base of the upper Cenomanian and mid lower Turonian. The general trend of the Lower Cretaceous reflects the transition from late rifting to passive margin, with the last break-up unconformity dated as late Aptian. The Lusitanian Basin achieved full infill by the Cenomanian, when a large carbonate platform extended far inland. The later deposits were preserved only in the northern sector and the accompanying unconformities reflect transpressive intraplate stresses generated in boundaries of the plate with Africa and Eurasia. With very low accommodation being created throughout the Late Cretaceous, fluvial deposits were dominant, including a few marine levels related with eustatic rises in the early Turonian, the Coniacian, the early Campanian and the Maastrichtian. 相似文献
14.
Pietro Vittorio Curzi Enrico Dinelli Marianna Ricci Lucchi Stefano Claudio Vaiani 《Geological Journal》2006,41(5):591-612
Accumulation of continental, deltaic and shallow‐marine sediments in the Po River coastal plain preserves a record of the Late Quaternary sea‐level changes and shoreline migrations. The palaeoenvironmental evolution of this area and the changes in composition and provenance of sediments have been investigated through integrated sedimentological, micropalaeontological (mainly foraminifers) and geochemical analyses of core S1, from the southern part of the Po River delta, within a chronological framework supported by radiocarbon dating and correlations with adjacent core sequences. Eleven lithofacies, grouped into five facies associations, and four palaeontological assemblages provide the basis to define the palaeoenvironmental reconstruction of this succession consisting, from the base to the top, of: (i) continental sediments accumulated during the Late Pleistocene; (ii) back‐barrier sediments marking the onset of Holocene sea‐level rise; (iii) transgressive sands deposited during the rapid landward migration of a barrier‐lagoon system; (iv) shallow‐marine and prodelta sediments with faunal associations indicating a gradual approach to the Po River mouth; and (v) sub‐recent delta front sands that form a considerable portion of the present coastal plain. Bulk chemical composition of sediments shows remarkable relationships with palaeoenvironments and locally improves facies characterizations. For example, they reveal carbonate leaching that emphasizes the occurrence of palaeosols in continental deposits or record enrichments in loss on ignition, S and Br, diagnostic of organic‐rich layers in back‐shore sediments. Selected geochemical elements (e.g. Mg and Ni) are particularly effective for the recognition of sediment provenances from the three main source areas observed in the subsurface deposits of the Po River coastal plain (e.g. Apenninic rivers, North Adriatic rivers and Po River). An Apenninic provenance is observed in continental and back‐barrier sediments. A North Adriatic provenance characterizes the transgressive sands and the shallow‐marine deposits; a significant Po River provenance is recorded in sediments related to the onset of the prodelta environment, confirmed by foraminiferal assemblages indicating remarkable increase in fluvial influxes. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
15.
根据岩性组合变化、测井曲线叠加样式及地震反射特征,将东营三角洲沙三中亚段划分为八个期次,准层序组PS8~PS1,各期次间沉积小型湖泛泥岩楔。结合岩心及测录井沉积相分析,认为研究区发育三角洲-重力流-湖泊沉积体系。东南部主要发育三角洲分流河道、河口坝、席状砂,西北部发育与三角洲前缘滑塌相伴生的坡移堆积体、滑塌浊积岩和远源浊积岩。准层序组PS8~PS1,活动三角洲经历了由南至北的迁移演化过程。当波浪与河流能量能够抗衡并往复运动时,形成厚度较大的三角洲楔状体叠加区,沉积席状砂和河口坝砂体。受湖平面变化、构造沉降及沉积物供给速率的影响,湖退体系域早期PS7~PS4重力流砂体含油丰富,而浅水区准层序组界线附近的席状砂和河口坝由于临近具有侧向封堵及局部盖层作用的泥岩楔及沼泽沉积,其含油性也较好。 相似文献
16.
The Miocene Barreiras Formation in the Middle Rio Capim area records an incised valley system for which facies analysis and ichnology (Skolithos, Ophiomorpha, Planolites, Gyrolithes, Taenidium) suggest an estuarine character. Three stratigraphic units are recognized (from bottom to top): Unit 1 includes an inner estuarine tidal channel complex and tidal flat/salt marsh deposits; Unit 2 consists of estuarine bay/lagoon and flood tidal delta deposits related to the estuary mouth; and Unit 3 includes a tidal channel with a tidal point bar, as well as tidal flat/salt marsh deposits similar to those from Unit 1. These units and their bounding surfaces record the history of relative sea level changes in the estuary. After a sea level drop, the valley was inundated and formed an amalgamated sequence boundary and transgressive surface. Transgression (Unit 1) promoted the landward shift of flood tidal deltas and lagoon settings (Unit 2). The system then moved seaward, with the superposition of inner estuarine deposits (Unit 3) over Unit 2. Facies architecture seems to have been controlled by tectonics, as shown by: the paleovalley orientation according to the main tectonic structures of the basin; the presence of faults and fractures that displace the basal unconformity; and the abundance of soft sediment deformation. 相似文献
17.
The 600 m thick prograding sedimentary succession of Wagad ranging in age from Callovian to Early Kimmeridgian has been divided
into three formations namely, Washtawa, Kanthkot and Gamdau. Present study is confined to younger part of the Washtawa Formation
and early part of the Kanthkot Formation exposed around Kanthkot, Washtawa, Chitrod and Rapar. The depositional architecture
and sedimentation processes of these deposits have been studied applying sequence stratigraphic context.
Facies studies have led to identification of five upward stacking facies associations (A, B, C, D, and E) which reflect that
deposition was controlled by one single transgressive — regressive cycle. The transgressive deposit is characterized by fining
and thinning upward succession of facies consisting of two facies associations: (1) Association A: medium — to coarse-grained
calcareous sandstone — mudrocks alternations (2) Association B: fine-grained calcareous sandstone — mudrocks alternations.
The top of this association marks maximum flooding surface as identified by bioturbational fabrics and abundance of deep marine
fauna (ammonites). Association A is interpreted as high energy transgressive deposit deposited during relative sea level rise.
Whereas, facies association B indicates its deposition in low energy marine environment deposited during stand-still period
with low supply of sediments. Regressive sedimentary package has been divided into three facies associations consisting of:
(1) Association C: gypsiferous mudstone-siltstone/fine sandstone (2) Association D: laminated, medium-grained sandstone —
siltstone (3) Association E: well laminated (coarse and fine mode) sandstone interbedded with coarse grained sandstone with
trough cross stratification. Regressive succession of facies association C, D and E is interpreted as wave dominated shoreface,
foreshore to backshore and dune environment respectively.
Sequence stratigraphic concepts have been applied to subdivide these deposits into two genetic sequences: (i) the lower carbonate
dominated (25 m) transgressive deposits (TST) include facies association A and B and the upper thick (75m) regressive deposits
(HST) include facies association C, D and E. The two sequences are separated by maximum flooding surface (MFS) identified
by sudden shift in facies association from B to C. The transgressive facies association A and B represent the sediments deposited
during the syn-rift climax followed by regressive sediments comprising association C, D and E deposited during late syn-rift
stage. 相似文献
18.
Flavia Girard Rmy Deschamps Jean‐Franois Ghienne Stphane Rouss Jean‐Loup Rubino 《Sedimentology》2019,66(3):1042-1066
To elucidate the signature of isostatic and eustatic signals during a deglaciation period in pre‐Pleistocene times is made difficult because very little dating can be done, and also because glacial erosion surfaces, subaerial unconformities and subsequent regressive or transgressive marine ravinement surfaces tend to amalgamate or erode the deglacial deposits. How and in what way can the rebound be interpreted from the stratigraphic record? This study proposes to examine deglacial deposits from Late‐Ordovician to Silurian outcrops at the Algeria–Libya border, in order to define the glacio–isostatic rebound and relative sea‐level changes during a deglaciation period. The studied succession developed at the edge and over a positive palaeo‐relief inherited from a prograding proglacial delta that forms a depocentre of glaciogenic deposits. The succession is divided into five subzones, which depend on the topography of this depocentre. Six facies associations were determined: restricted marine (Facies Association 1); tidal channels (Facies Association 2); tidal sand dunes (Facies Association 3); foreshore to upper shoreface (Facies Association 4); lower shoreface (Facies Association 5); and offshore shales (Facies Association 6). Stratigraphic correlations over the subzones support the understanding of the depositional chronology and associated sea‐level changes. Deepest marine domains record a forced regression of 40 m of sea‐level fall resulting from an uplift caused by a glacio‐isostatic rebound that outpaces the early transgression. The rebound is interpreted to result in a multi‐type surface, which is interpreted as a regressive surface of marine erosion in initially marine domains and as a subaerial unconformity surface in an initially subaerial domain. The transgressive deposits have developed above this surface, during the progressive flooding of the palaeo‐relief. Sedimentology and high‐resolution sequence stratigraphy allowed the delineation of a deglacial sequence and associated sea‐level changes curve for the studied succession. Estimates suggest a relatively short (<10 kyr) duration for the glacio‐isostatic uplift and a subsequent longer duration transgression (4 to 5 Myr). 相似文献
19.
A thick Upper Ordovician shelf sequence was developed in the northern Gondwana margin (southernmost exposures of the Central Iberian Zone). Integrated sedimentologic and stratigraphic studies allow distinction between pedogenetic processes (Facies association C), shoreline deposits (Facies association S), proximal to distal shelf (Facies association L, H1, H2, H3) and outer shelf zone or open marine environments (Facies association M, Mo). The vertical distribution of facies is characterized by the presence of regressive high frequency sequences (partial shelf progradational sequences), affected by the presence of catastrophic phenomena (storms). These sequences, in turn, can be classified into higher‐order transgressive (T)–regressive (R) cycles. Two second‐order T‐R megacycles (MC. Ord‐2 and MC. Sil‐1) limited by a major sequence boundary are identified. Traces of emersion (palaeokarsts and palaeosols) are detected along the sequence boundary, and these are related to the eustatic sea‐level fall that occurred during the Ashgillian. The MC. Ord‐2 and MC. Sil‐1 megacycles extend respectively from the Middle Arenig to the Ashgillian and from Late Ashgillian to the Late Llandovery. Major transgressive peaks occurred at the Llanvirn and at the Middle Llandovery (Aeronian). The vertical distribution of the facies delineates successive genetically related units in relation to relative sea‐level changes. Within the upper part of the first megacycle (MC. Ord‐2) six third‐order cycles are proposed (Lla‐1, Car‐1, Car‐2, Car‐3, Car‐4, Ash‐1), in which a transgressive and a regressive interval can be distinguished. Within the lower part of the second megacycle (MC. Sil‐1) two transgressive–regressive third‐order cycles are proposed (Lly‐1, Lly‐2). Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
20.
Joni Mäkinen 《Sedimentology》2003,50(2):327-360
ABSTRACT Evidence of conspicuous repeated seasonal to annual deposition of glaciofluvial and glaciolacustrine sequences within a structurally complex interlobate esker segment in SW Finland is presented. The time‐transgressive, overlapping depositional sequences consist of deposits from two successive melt seasons, including three vertically stacked lithofacies associations: (1) massive to stratified coarse gravels = summer deposits; (2) trough and ripple cross‐stratified fine‐grained deposits = autumn to winter deposits; and (3) sandy stratified beds = spring deposits. The depositional environment of each lithofacies association involves a transition from subglacial or submarginal tunnel to a subaqueous re‐entrant environment, which then passes to a proglacial glaciolacustrine environment. The study also presents evidence of headward extension of subglacial tunnel deposits, related to the rapid shifting of a tunnel expansion point during the increasing spring discharge, which occupied the old tunnel exit: this mode of annual deposition has not been reported previously in esker studies. The good preservation of the rhythmic lithofacies associations is suggested as resulting from interlobate depositional conditions associated with rapidly decaying icestreams. Therefore, the depositional model may provide a key to recognizing time‐transgressive interlobate eskers that form an important geomorphological and sedimentological record of meltwater activity during the last deglaciation of the Fennoscandian and Laurentide ice sheets. The identification of time‐transgressive interlobate eskers and associated palaeo‐icestream behaviour is an essential step forward for more accurate models of ice sheet behaviour and palaeoclimatic reconstructions. 相似文献